H3C-RPR-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: H3C-RPR-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, IEEE-802DOT17-RPR-MIB, SNMPv2-SMI, HUAWEI-3COM-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cRpr 1.3.6.1.4.1.2011.10.2.60
This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner.
       h3cRprObjects 1.3.6.1.4.1.2011.10.2.60.1
           h3cRprMaxmumDefine 1.3.6.1.4.1.2011.10.2.60.1.1
               h3cRprMaxmumDefineTable 1.3.6.1.4.1.2011.10.2.60.1.1.1 no-access
This table contains the specs of RPR ring.
                   h3cRprMaxmumDefineEntry 1.3.6.1.4.1.2011.10.2.60.1.1.1.1 no-access
The entry of RPR Maximum Table.
                       h3cRprMaxMumIfIndex 1.3.6.1.4.1.2011.10.2.60.1.1.1.1.1 interfaceindex no-access
The ifIndex of this RPR interface.
                       h3cRprMaxStationNumDefine 1.3.6.1.4.1.2011.10.2.60.1.1.1.1.2 integer read-only
Max station number supported by RPR ring.
                       h3cRprMaxReservedRateDefine 1.3.6.1.4.1.2011.10.2.60.1.1.1.1.3 gauge32 read-only
Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
           h3cRprTopoImage 1.3.6.1.4.1.2011.10.2.60.1.2
               h3cRprTopoImageXTable 1.3.6.1.4.1.2011.10.2.60.1.2.1 no-access
This table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.
                   h3cRprTopoImageXEntry 1.3.6.1.4.1.2011.10.2.60.1.2.1.1 no-access
Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet.
                       h3cRprTopoImageXWestEdgeStatus 1.3.6.1.4.1.2011.10.2.60.1.2.1.1.3 truthvalue read-only
The current edge status of the west span. If an edge exists,the h3cRprTopoImageXWestEdgeStatus is true. Otherwise, the h3cRprTopoImageXWestEdgeStatus is false.
                       h3cRprTopoImageXEastEdgeStatus 1.3.6.1.4.1.2011.10.2.60.1.2.1.1.4 truthvalue read-only
The current edge status of the east span. If an edge exists, the h3cRprTopoImageXEastEdgeStatus is true. Otherwise, the h3cRprTopoImageXEastEdgeStatus is false.
                       h3cRprTopoImageXStationName 1.3.6.1.4.1.2011.10.2.60.1.2.1.1.5 snmpadminstring read-write
The operator assigned station name. The operator can assigned it by h3cRprTopoImageXStationName.
           h3cRprSpanCounters 1.3.6.1.4.1.2011.10.2.60.1.3
               h3cRprSrcMacCountTable 1.3.6.1.4.1.2011.10.2.60.1.3.1 no-access
The RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station.
                   h3cRprSrcMacCountEntry 1.3.6.1.4.1.2011.10.2.60.1.3.1.1 no-access
An entry in the RPR Source Mac Count Table.
                       h3cRprSrcMacCountIfIndex 1.3.6.1.4.1.2011.10.2.60.1.3.1.1.1 interfaceindex no-access
The ifIndex of this RPR interface.
                       h3cRprSrcMacCountBySrcAddress 1.3.6.1.4.1.2011.10.2.60.1.3.1.1.2 macaddress no-access
MAC address of the source station where the frames come from.
                       h3cRprSrcMacCountReceivedFrames 1.3.6.1.4.1.2011.10.2.60.1.3.1.1.3 counter64 read-only
Frames received from a particular MAC address of source station.
                       h3cRprSrcMacCountReceivedOctets 1.3.6.1.4.1.2011.10.2.60.1.3.1.1.4 counter64 read-only
Octets received from a particular MAC address of source station.
               h3cRprDestMacCountTable 1.3.6.1.4.1.2011.10.2.60.1.3.2 no-access
The RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station.
                   h3cRprDestMacCountEntry 1.3.6.1.4.1.2011.10.2.60.1.3.2.1 no-access
An entry in the RPR MAC Destination Count Table.
                       h3cRprDestMacCountIfIndex 1.3.6.1.4.1.2011.10.2.60.1.3.2.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprDestMacCountByDestAddress 1.3.6.1.4.1.2011.10.2.60.1.3.2.1.2 macaddress no-access
MAC address of the destination station where the frames are sent to.
                       h3cRprDestMacCountReceivedFrames 1.3.6.1.4.1.2011.10.2.60.1.3.2.1.3 counter64 read-only
Frames sent to a particular MAC address of destination station.
                       h3cRprDestMacCountReceivedOctets 1.3.6.1.4.1.2011.10.2.60.1.3.2.1.4 counter64 read-only
Octets sent to a particular MAC address of destination station.
               h3cRprPktDropCountTable 1.3.6.1.4.1.2011.10.2.60.1.3.3 no-access
The RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion.
                   h3cRprPktDropCountEntry 1.3.6.1.4.1.2011.10.2.60.1.3.3.1 no-access
An entry in the RPR Packet Drop Count Table.
                       h3cRprPktDropCntIfIndex 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.1 interfaceindex no-access
The ifIndex of this RPR interface.
                       h3cRprPktDropCntRingletID 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.2 h3crprringletid no-access
The RPR Ringlet of the station through which the packets transmit.
                       h3cRprDownFlowClassAPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.3 counter64 read-only
The total dropped number of Class A packets which transmit down from the host.
                       h3cRprUpFlowClassAPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.4 counter64 read-only
The total dropped number of Class A packets which transmit up to the host.
                       h3cRprDownFlowClassBPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.5 counter64 read-only
The total dropped number of Class B packets which transmit down from the host.
                       h3cRprUpFlowClassBPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.6 counter64 read-only
The total dropped number of Class B packets which transmit up to the host.
                       h3cRprDownFlowClassCPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.7 counter64 read-only
The total dropped number of Class C packets which transmit down from the host.
                       h3cRprUpFlowClassCPktDrops 1.3.6.1.4.1.2011.10.2.60.1.3.3.1.8 counter64 read-only
The total dropped number of Class C packets which transmit up to the host.
           h3cRprRS 1.3.6.1.4.1.2011.10.2.60.1.4
               h3cRprStaticRSTable 1.3.6.1.4.1.2011.10.2.60.1.4.1 no-access
The RPR Static Ring Selection table contains the static ring selection information by the way of configuration.
                   h3cRprStaticRSEntry 1.3.6.1.4.1.2011.10.2.60.1.4.1.1 no-access
An entry in the RPR Static Ring Selection table.
                       h3cRprStaticRSIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprStaticRSMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.2 macaddress no-access
The MAC address of the station on the ring.
                       h3cRprStaticRSRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.3 h3crprringletid read-only
The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.
                       h3cRprStaticRSTtl 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.4 integer read-only
The hops from source station to destination station by the selected ringlet.
                       h3cRprStaticRSValid 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.5 truthvalue read-only
The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.
                       h3cRprStaticRSRowStatus 1.3.6.1.4.1.2011.10.2.60.1.4.1.1.6 rowstatus read-only
The status of this table entry. The status includes createAndGo, active and destroy.
               h3cRprIpv4DynamicRSTable 1.3.6.1.4.1.2011.10.2.60.1.4.2 no-access
The RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path.
                   h3cRprIpv4DynamicRSEntry 1.3.6.1.4.1.2011.10.2.60.1.4.2.1 no-access
An entry in the RPR Ipv4Dynamic Ring Selection Table.
                       h3cRprIpv4DynamicRSIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.2.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprIpv4DynamicRSMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.2.1.2 macaddress no-access
The Ipv4 MAC address of destination station on the ring.
                       h3cRprIpv4DynamicRSRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.2.1.3 h3crprringletid read-only
The identifier of the ring which frames are sent from the source station to the destination station.
                       h3cRprIpv4DynamicRSTtl 1.3.6.1.4.1.2011.10.2.60.1.4.2.1.4 integer read-only
The hops from source station to destination station by the selected ringlet.
               h3cRprIpv6DynamicRSTable 1.3.6.1.4.1.2011.10.2.60.1.4.3 no-access
The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection.
                   h3cRprIpv6DynamicRSEntry 1.3.6.1.4.1.2011.10.2.60.1.4.3.1 no-access
An entry in the RPR Ipv6 Ring Selection Table.
                       h3cRprIpv6DynamicRSIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.3.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprIpv6DynamicRSMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.3.1.2 macaddress no-access
The Ipv6 MAC address of the destination station on the ring.
                       h3cRprIpv6DynamicRSRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.3.1.3 h3crprringletid read-only
The identifier of the ring which frames are sent from the source station to the destination station.
                       h3cRprIpv6DynamicRSTtl 1.3.6.1.4.1.2011.10.2.60.1.4.3.1.4 integer read-only
The hops from source station to destination station by selected ringlet.
               h3cRprIpv4OverallRSTable 1.3.6.1.4.1.2011.10.2.60.1.4.4 no-access
The RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection.
                   h3cRprIpv4OverallRSEntry 1.3.6.1.4.1.2011.10.2.60.1.4.4.1 no-access
An entry in the RPR Overall Ring Selection Table.
                       h3cRprIpv4OverallRSIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.4.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprIpv4OverallRSMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.4.1.2 macaddress no-access
The MAC address of the destination station on the ring.
                       h3cRprIpv4OverallRSType 1.3.6.1.4.1.2011.10.2.60.1.4.4.1.3 integer read-only
The ring selection item type indicates static or dynamic. Enumeration: 'static': 1, 'dynamic': 2.
                       h3cRprIpv4OverallRSRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.4.1.4 h3crprringletid read-only
The identifier of the ring which frames are sent from the source station to the destination station.
                       h3cRprIpv4OverallRSTtl 1.3.6.1.4.1.2011.10.2.60.1.4.4.1.5 integer read-only
The hops from source station to destination station by selected ringlet.
               h3cRprVrrpRSTable 1.3.6.1.4.1.2011.10.2.60.1.4.5 no-access
The RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured.
                   h3cRprVrrpRSEntry 1.3.6.1.4.1.2011.10.2.60.1.4.5.1 no-access
An entry in the RPR VRRP Ring Selection Table.
                       h3cRprVrrpRSIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.5.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprVrrpRSVirtualMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.5.1.2 macaddress no-access
The virtual MAC address of the staion in VRRP group.
                       h3cRprVrrpRSMacAddress 1.3.6.1.4.1.2011.10.2.60.1.4.5.1.3 macaddress read-only
The MAC address of the station that is the master in VRRP group.
                       h3cRprVrrpRSRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.5.1.4 h3crprringletid read-only
The identifier of the ring which frames are sent from the source station to the destination station.
                       h3cRprVrrpRSTtl 1.3.6.1.4.1.2011.10.2.60.1.4.5.1.5 integer read-only
The hops from source station to destination station by selected ringlet.
               h3cRprDefaultRingIDTable 1.3.6.1.4.1.2011.10.2.60.1.4.6 no-access
The RPR Default RingID Table specify the default ringID.
                   h3cRprDefaultRingIDEntry 1.3.6.1.4.1.2011.10.2.60.1.4.6.1 no-access
An entry in the RPR Default RingID Table.
                       h3cRprDefaultRingIDIfIndex 1.3.6.1.4.1.2011.10.2.60.1.4.6.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprDefaultConfigRingletID 1.3.6.1.4.1.2011.10.2.60.1.4.6.1.2 h3crprringletid read-write
The default identifier of the ring configured by user.
                       h3cRprDefaultActiveRingID 1.3.6.1.4.1.2011.10.2.60.1.4.6.1.3 h3crprringletid read-only
The identifier of the default ring which is active currently. The default ring configured by user may be inactive.
           h3cRprDefect 1.3.6.1.4.1.2011.10.2.60.1.5
               h3cRprDefectReportTable 1.3.6.1.4.1.2011.10.2.60.1.5.1 no-access
The RPR Defect Report Table that contains the trap information on the ring.
                   h3cRprDefectReportEntry 1.3.6.1.4.1.2011.10.2.60.1.5.1.1 no-access
An entry in the RPR Defect Report Table.
                       h3cRprDefectIfIndex 1.3.6.1.4.1.2011.10.2.60.1.5.1.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprDefectCurrentStatus 1.3.6.1.4.1.2011.10.2.60.1.5.1.1.2 bits read-only
Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring. Bits: 'topoInstability': 1, 'topologyOpenRing': 0, 'excessMaxStationNum': 9, 'dulpIPAddress': 4, 'lrttDefect': 5, 'dulpMacAddress': 3, 'miscabling': 10, 'jumboCfgDefect': 7, 'topoInconsistent': 2, 'excessReservedRateDefect': 8, 'backPressure': 11, 'protCfgDefect': 6.
           h3cRprPriorityMap 1.3.6.1.4.1.2011.10.2.60.1.6
               h3cRprPriority2ClassMapTable 1.3.6.1.4.1.2011.10.2.60.1.6.1 no-access
The Table is for Class Of Service and RPR Service Class Mapping.
                   h3cRprPriority2ClassMapEntry 1.3.6.1.4.1.2011.10.2.60.1.6.1.1 no-access
An entry in the COS to Service Class Map Table.
                       h3cRprPriority2ClassMapIfIndex 1.3.6.1.4.1.2011.10.2.60.1.6.1.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprPriority2ClassMapType 1.3.6.1.4.1.2011.10.2.60.1.6.1.1.2 integer no-access
The type of Priority,include tag, mpls, ip. Enumeration: 'ip': 3, 'tag': 1, 'mpls': 2.
                       h3cRprPriorityValue 1.3.6.1.4.1.2011.10.2.60.1.6.1.1.3 integer no-access
The priority of tag,mpls and ip, the value range is 0~7. Enumeration: 'pri1': 2, 'pri0': 1, 'pri3': 4, 'pri2': 3, 'pri5': 6, 'pri4': 5, 'pri7': 8, 'pri6': 7.
                       h3cRprPriority2ClassMap 1.3.6.1.4.1.2011.10.2.60.1.6.1.1.4 h3crprserviceclass read-write
The RPR service class.
           h3cRprRateLimitConfig 1.3.6.1.4.1.2011.10.2.60.1.7
               h3cRprRateLimitConfigTable 1.3.6.1.4.1.2011.10.2.60.1.7.1 no-access
The RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class.
                   h3cRprRateLimitConfigEntry 1.3.6.1.4.1.2011.10.2.60.1.7.1.1 no-access
An entry in the RPR Rate Limit Configuration Table.
                       h3cRprRateLimitConfigIfIndex 1.3.6.1.4.1.2011.10.2.60.1.7.1.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprRateLimitConfigRingletId 1.3.6.1.4.1.2011.10.2.60.1.7.1.1.2 h3crprringletid no-access
The identifier of the ring of RPR ringlet.
                       h3cRprRateLimitConfigServiceClass 1.3.6.1.4.1.2011.10.2.60.1.7.1.1.3 h3crprserviceclass no-access
The RPR service class.
                       h3cRprRateLimitConfigValue 1.3.6.1.4.1.2011.10.2.60.1.7.1.1.4 integer32 read-write
The value of rate-limit that configured for diffrent service class. The unit is permillage.
           h3cRprMacAddrLearn 1.3.6.1.4.1.2011.10.2.60.1.8
               h3cRprMacLearnCfgTable 1.3.6.1.4.1.2011.10.2.60.1.8.1 no-access
The RPR MAC Address Table.
                   h3cRprMacLearnCfgEntry 1.3.6.1.4.1.2011.10.2.60.1.8.1.1 no-access
The entry of RPR MAC Address Table.
                       h3cRprMacLearnIfIndex 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.1 interfaceindex no-access
The ifIndex of RPR interface.
                       h3cRprMacLearnRprMac 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.2 macaddress no-access
The MAC address of the RPR station.
                       h3cRprMacLearnType 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.3 integer read-only
The type of MAC address item that the user built. The type includes static and dynamic.
                       h3cRprMacLearnDestMac 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.4 macaddress read-only
The destination of MAC address.
                       h3cRprMacLearnVlanId 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.5 integer32 read-only
The vlan ID that the MAC address learned from by RPR staion.
                       h3cRprMacLearnRinglet 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.6 h3crprringletid read-only
The identifier of the ring which frames are sent from the source station to the destination station.
                       h3cRprMacLearnTtl 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.7 integer read-only
The hops from source station to destination station on the selected ringlet.
                       h3cRprMacLearnIsValid 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.8 truthvalue read-only
The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.
                       h3cRprMacLearnRowStatus 1.3.6.1.4.1.2011.10.2.60.1.8.1.1.9 rowstatus read-only
The status of this table entry. The status includes createAndGo, active and destroy.
           h3cRprTrapVar 1.3.6.1.4.1.2011.10.2.60.1.9
               h3cRprTrapVarTable 1.3.6.1.4.1.2011.10.2.60.1.9.1 no-access
The RPR Defect Report Table that contains varible that used to bind in trap.
                   h3cRprTrapVarEntry 1.3.6.1.4.1.2011.10.2.60.1.9.1.1 no-access
An entry in the RPR Trap Var Table.
                       h3cRprTrapIfIndex 1.3.6.1.4.1.2011.10.2.60.1.9.1.1.1 interfaceindex no-access
The ifIndex of RPR interface. It is only used for trap to bind.
                       h3cRprTrapRinglet 1.3.6.1.4.1.2011.10.2.60.1.9.1.1.2 h3crprringletid no-access
The span of RPR station. It is only used for trap to bind.
                       h3cRprTrapTopoMacAddress 1.3.6.1.4.1.2011.10.2.60.1.9.1.1.3 macaddress no-access
The MAC address of RPR station. It is only used for trap to bind.
                       h3cRprTrapIpAddress 1.3.6.1.4.1.2011.10.2.60.1.9.1.1.4 inetaddress no-access
The IP address of RPR station. It is only used for trap to bind.
           h3cRprTrap 1.3.6.1.4.1.2011.10.2.60.1.10
                 h3cRprTopologyOpenRing 1.3.6.1.4.1.2011.10.2.60.1.10.1
The topology openRing trap indicates that the RPR ring is opened.
                 h3cRprTopologyCloseRing 1.3.6.1.4.1.2011.10.2.60.1.10.2
The topology openRing trap indicates that the RPR ring is closed.
                 h3cRprTopologyInconsistent 1.3.6.1.4.1.2011.10.2.60.1.10.3
The topology inconsistent trap indicates that the topology of RPR is inconsistent.
                 h3cRprTopologyInstability 1.3.6.1.4.1.2011.10.2.60.1.10.4
The topology instability trap indicates that the topology of RPR is instability.
                 h3cRprDuplicateMacAddress 1.3.6.1.4.1.2011.10.2.60.1.10.5
The duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring.
                 h3cRprDulplicateIPAddress 1.3.6.1.4.1.2011.10.2.60.1.10.6
The dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring.
                 h3cRprIncompleteLRTT 1.3.6.1.4.1.2011.10.2.60.1.10.7
The incomplete LRTT trap indicates that LRTT is not completed.
                 h3cRprProtecConfigInconsistent 1.3.6.1.4.1.2011.10.2.60.1.10.8
The protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode.
                 h3cRprJumboConfigInconsistent 1.3.6.1.4.1.2011.10.2.60.1.10.9
The jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame.
                 h3cRprExceedMaxReservRate 1.3.6.1.4.1.2011.10.2.60.1.10.10
The exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum.
                 h3cRprExceedMaxStationNum 1.3.6.1.4.1.2011.10.2.60.1.10.11
The exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number.
                 h3cRprMiscabling 1.3.6.1.4.1.2011.10.2.60.1.10.12
The miscabling trap indicates that the miscabling event occurred.
                 h3cRprBackPressure 1.3.6.1.4.1.2011.10.2.60.1.10.13
The back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured.
                 h3cRprBackPressureOver 1.3.6.1.4.1.2011.10.2.60.1.10.14
The back pressure over trap indicates that the backpressure is disappeared on the ringlet.