H3C-RDDC-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: H3C-RDDC-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HUAWEI-3COM-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cRddc 1.3.6.1.4.1.2011.10.2.151
Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over the function of the failed group-node with minimal service interruption. This module defines the objects pertaining to redundancy group(RDDC).
         h3cRddcNotifications 1.3.6.1.4.1.2011.10.2.151.0
             h3cRddcSwitchoverTrap 1.3.6.1.4.1.2011.10.2.151.0.1
Notification to signal switchover/failover.
             h3cRddcFailIfRecoverTrap 1.3.6.1.4.1.2011.10.2.151.0.2
Notification to signal the failed interface recovered.
             h3cRddcFailIfGenerateTrap 1.3.6.1.4.1.2011.10.2.151.0.3
Notification to signal the failed interface generated.
         h3cRddcObjects 1.3.6.1.4.1.2011.10.2.151.1
             h3cRddcInfo 1.3.6.1.4.1.2011.10.2.151.1.1
                 h3cRddcTable 1.3.6.1.4.1.2011.10.2.151.1.1.1 no-access
This table describes the current status of redundancy groups.
                     h3cRddcEntry 1.3.6.1.4.1.2011.10.2.151.1.1.1.1 no-access
The entry of h3cRddcEntry.
                         h3cRddcGroupIdx 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.1 unsigned32 no-access
Unique identifier of this redundancy group. 0 is an invalid value.
                         h3cRddcGroupName 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.2 octet string read-only
Unique identifier of this redundancy group.
                         h3cRddcPreempTimeRemain 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.3 unsigned32 read-only
The redundancy group should not switch back immediately when a failover is recovered. The preempt delay timer is started for waiting the failover became believable. This object contains the current preempt delay time remained when a failover is recovered.
                         h3cRddcPreempTimeConfig 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.4 unsigned32 read-only
The current preempt delay time.
                         h3cRddcHoldTimeRemain 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.5 unsigned32 read-only
To prevent frequent switchovers of the redundancy group, the hold-down timer started to keeping in a state for a fixed time. This object contains the current remained hold-down time when a switchover or a failover recovery occurred.
                         h3cRddcHoldTimeConfig 1.3.6.1.4.1.2011.10.2.151.1.1.1.1.6 unsigned32 read-only
The current hold-down time.
                 h3cRddcNodeTable 1.3.6.1.4.1.2011.10.2.151.1.1.2 no-access
This table describes the current status of a redundancy group node.
                     h3cRddcNodeEntry 1.3.6.1.4.1.2011.10.2.151.1.1.2.1 no-access
The entry of h3cRddcNodeEntry.
                         h3cRddcNodeGroupIdx 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.1 unsigned32 no-access
Unique identifier of this redundancy group. 0 is an invalid value.
                         h3cRddcNodeId 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.2 unsigned32 no-access
Unique identifier of this redundancy group node. 0 is an invalid value.
                         h3cRddcNodeBindType 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.3 integer read-only
The bind type of this redundancy group node. The current version only supports binding chassis of an IRF device. Enumeration: 'chassis': 2, 'invalid': 1.
                         h3cRddcNodeBindInfo 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.4 unsigned32 read-only
The bind information of this redundancy group node. The current version only supports binding chassis of an IRF device. If the value of h3cRddcNodeBindType is invalid, the value of h3cRddcNodeBindInfo is 65535.
                         h3cRddcNodePriority 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.5 unsigned32 read-only
The priority of this redundancy group node. The higher the value, the greater the priority.
                         h3cRddcNodeWeight 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.6 integer32 read-only
The current weight of this redundancy group node. The max value is 255.
                         h3cRddcNodeStatus 1.3.6.1.4.1.2011.10.2.151.1.1.2.1.7 integer read-only
The current status of this redundancy group node. Enumeration: 'standby': 3, 'master': 2, 'invalid': 1.
             h3cRddcTrapObjects 1.3.6.1.4.1.2011.10.2.151.1.2
                 h3cRddcNodeInfo 1.3.6.1.4.1.2011.10.2.151.1.2.1 displaystring no-access
This object contains node identification information where the switchover occurred.
                 h3cRddcSwitchReason 1.3.6.1.4.1.2011.10.2.151.1.2.2 displaystring no-access
This object contains the cause for switchover.