H3C-EOC-COMMON-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
Home | MIB: H3C-EOC-COMMON-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
h3cEOCCommon | 1.3.6.1.4.1.2011.10.2.83 |
The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification. |
||
h3cEOCCommonSysMan | 1.3.6.1.4.1.2011.10.2.83.1 | |||
h3cEOCCommonSysScalarObjects | 1.3.6.1.4.1.2011.10.2.83.1.1 | |||
h3cEOCCommonSysVersion | 1.3.6.1.4.1.2011.10.2.83.1.1.1 | octet string | read-only |
Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024. |
h3cEOCCommonUpLinkMacAddress | 1.3.6.1.4.1.2011.10.2.83.1.1.2 | macaddress | read-only |
EOC CLT's uplink device's mac address. |
h3cEOCCommonCltMan | 1.3.6.1.4.1.2011.10.2.83.2 | |||
h3cEOCCommonCltManTable | 1.3.6.1.4.1.2011.10.2.83.2.1 | no-access |
This table defines the primary parameters of the CLT configuration. |
|
1.3.6.1.4.1.2011.10.2.83.2.1.1 | no-access |
The entry of the table h3cEOCCommonCltManTable. |
||
h3cEOCCommonCltAutoAuthorize | 1.3.6.1.4.1.2011.10.2.83.2.1.1.1 | truthvalue | read-write |
This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically. |
h3cEOCCommonCltMaxAllowToAccess | 1.3.6.1.4.1.2011.10.2.83.2.1.1.2 | integer32 | read-write |
This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access. |
h3cEOCComCnuMan | 1.3.6.1.4.1.2011.10.2.83.3 | |||
h3cEOCComCnuScalarObjects | 1.3.6.1.4.1.2011.10.2.83.3.1 | |||
h3cEOCComCnuMaxDownBWMinVal | 1.3.6.1.4.1.2011.10.2.83.3.1.1 | integer32 | read-only |
The lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW. |
h3cEOCComCnuMaxDownBWMaxVal | 1.3.6.1.4.1.2011.10.2.83.3.1.2 | integer32 | read-only |
The upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxDownBW. |
h3cEOCComCnuSlaHighPriBWMinVal | 1.3.6.1.4.1.2011.10.2.83.3.1.3 | integer32 | read-only |
The lower limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW. |
h3cEOCComCnuSlaHighPriBWMaxVal | 1.3.6.1.4.1.2011.10.2.83.3.1.4 | integer32 | read-only |
The upper limit of high priority bandwidth which is confined to h3cEOCComCnuSlaHighPriBW. |
h3cEOCComCnuMaxUpBWMinVal | 1.3.6.1.4.1.2011.10.2.83.3.1.5 | integer32 | read-only |
The lower limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW. |
h3cEOCComCnuMaxUpBWMaxVal | 1.3.6.1.4.1.2011.10.2.83.3.1.6 | integer32 | read-only |
The upper limit of total-bandwidth which is confined to h3cEOCComCnuMaxUpBW. |
h3cEOCComCnuAttenThrA | 1.3.6.1.4.1.2011.10.2.83.3.1.7 | integer32 | read-write |
The value of cnu's average attenuation good level thresholds. |
h3cEOCComCnuAttenThrB | 1.3.6.1.4.1.2011.10.2.83.3.1.8 | integer32 | read-write |
The value of cnu's average attenuation normal level thresholds. |
h3cEOCComCnuRateDropThr | 1.3.6.1.4.1.2011.10.2.83.3.1.9 | integer32 | read-write |
The value of cnu's Tx/Rx rate drop thresholds. |
h3cEOCComCnuSysManTable | 1.3.6.1.4.1.2011.10.2.83.3.2 | no-access |
This table implements the management of CNUs(Coax Network Unit). |
|
1.3.6.1.4.1.2011.10.2.83.3.2.1 | no-access |
The entry of the table h3cEOCComCnuSysManTable. |
||
h3cEOCComCnuCableIfindex | 1.3.6.1.4.1.2011.10.2.83.3.2.1.1 | integer32 | read-only |
The index of cable port which uniquely identifies the cable port of one device. |
h3cEOCComCnuDeviceType | 1.3.6.1.4.1.2011.10.2.83.3.2.1.2 | displaystring | read-write |
The type of the EOC CNU(Coax Network Unit). |
h3cEOCComCnuDeviceAlias | 1.3.6.1.4.1.2011.10.2.83.3.2.1.3 | displaystring | read-write |
EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably. |
h3cEOCComCnuDescr | 1.3.6.1.4.1.2011.10.2.83.3.2.1.4 | displaystring | read-write |
User's description, including user's address, name, telephone number and so on. |
h3cEOCComCnuUpTime | 1.3.6.1.4.1.2011.10.2.83.3.2.1.5 | timeticks | read-only |
The time since the CNU last registered to the network. |
h3cEOCComCnuVLANType | 1.3.6.1.4.1.2011.10.2.83.3.2.1.6 | integer | read-write |
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. Enumeration: 'access': 2, 'hybrid': 3, 'fabric': 4, 'vLANTrunk': 1. |
h3cEOCComCnuPvid | 1.3.6.1.4.1.2011.10.2.83.3.2.1.7 | integer32 | read-write |
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface. |
h3cEOCComCnuVlanTag | 1.3.6.1.4.1.2011.10.2.83.3.2.1.8 | integer | read-write |
VLAN is set tagged or untagged on cable interface. Enumeration: 'untagged': 2, 'tagged': 1. |
h3cEOCComCnuReset | 1.3.6.1.4.1.2011.10.2.83.3.2.1.9 | integer | read-write |
This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time. Enumeration: 'reset': 2, 'running': 1. |
h3cEOCComCnuDeregister | 1.3.6.1.4.1.2011.10.2.83.3.2.1.10 | integer | read-write |
deregister CNU. Enumeration: 'deregister': 1. |
h3cEOCComCnuSave | 1.3.6.1.4.1.2011.10.2.83.3.2.1.11 | integer | read-write |
Save the UNI and CNU related configurations to the CNU. Enumeration: 'running': 2, 'save': 1. |
h3cEOCComCnuAccess | 1.3.6.1.4.1.2011.10.2.83.3.2.1.12 | integer | read-write |
Control whether the user can access to the network. Enumeration: 'access': 1, 'notaccess': 2. |
h3cEOCComCnuMacTable | 1.3.6.1.4.1.2011.10.2.83.3.3 | no-access |
This table implements the management of CNUs. |
|
1.3.6.1.4.1.2011.10.2.83.3.3.1 | no-access |
The entry of the table h3cEOCComCnuMacTable. |
||
h3cEOCComCnuMacAddress | 1.3.6.1.4.1.2011.10.2.83.3.3.1.1 | macaddress | read-only |
EOC CNU's MAC address. |
h3cEOCComCnuRowStatus | 1.3.6.1.4.1.2011.10.2.83.3.3.1.2 | rowstatus | read-only |
Operation status. |
h3cEOCComCnuInfoTable | 1.3.6.1.4.1.2011.10.2.83.3.4 | no-access |
Primary status of the specified CNU. There will be one row in this table for each information in the system. |
|
1.3.6.1.4.1.2011.10.2.83.3.4.1 | no-access |
The entry of the h3cEOCComCnuInfoTable. |
||
h3cEOCComCnuHardwareVersion | 1.3.6.1.4.1.2011.10.2.83.3.4.1.1 | displaystring | read-only |
EOC CNU's hardware version. If the object length is zero, it means the version is unknown. |
h3cEOCComCnuPCBVersion | 1.3.6.1.4.1.2011.10.2.83.3.4.1.2 | octet string | read-only |
EOC CNU's PCB version. |
h3cEOCComCnuLinkState | 1.3.6.1.4.1.2011.10.2.83.3.4.1.3 | integer | read-only |
The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. Enumeration: 'linkup': 3, 'physicaldown': 1, 'linkdown': 2. |
h3cEOCComCnuAttenuation | 1.3.6.1.4.1.2011.10.2.83.3.4.1.4 | integer32 | read-only |
The cnu's average attenuation. |
h3cEOCComCnuSoftwareVersion | 1.3.6.1.4.1.2011.10.2.83.3.4.1.5 | displaystring | read-only |
EOC CNU's software version. If the object length is zero, it means the version is unknown. |
h3cEOCComCnuTxRate | 1.3.6.1.4.1.2011.10.2.83.3.4.1.6 | integer32 | read-only |
The cnu's capability of tx speed in unit of 1Mbps. |
h3cEOCComCnuRxRate | 1.3.6.1.4.1.2011.10.2.83.3.4.1.7 | integer32 | read-only |
The cnu's capability of rx speed in unit of 1Mbps. |
h3cEOCComCnuTxRateDrop | 1.3.6.1.4.1.2011.10.2.83.3.4.1.8 | integer32 | read-only |
The cnu's capability droping of tx speed from it's history max value in unit of %. |
h3cEOCComCnuRxRateDrop | 1.3.6.1.4.1.2011.10.2.83.3.4.1.9 | integer32 | read-only |
The cnu's capability droping of rx speed from it's history max value in unit of %. |
h3cEOCComCnuBandWidthTable | 1.3.6.1.4.1.2011.10.2.83.3.5 | no-access |
Set bandwidth parameters. |
|
1.3.6.1.4.1.2011.10.2.83.3.5.1 | no-access |
The entry of table h3cEOCComCnuBandWidthTable. It is a pre-configuration. |
||
h3cEOCComCnuMaxDownBW | 1.3.6.1.4.1.2011.10.2.83.3.5.1.1 | integer32 | read-write |
Maximum bandwidth allowed for the CNU, measured in Kbit/s. |
h3cEOCComCnuSlaHighPriBW | 1.3.6.1.4.1.2011.10.2.83.3.5.1.2 | integer32 | read-write |
High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth. |
h3cEOCComCnuMaxUpBW | 1.3.6.1.4.1.2011.10.2.83.3.5.1.3 | integer32 | read-write |
Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth. |
h3cEOCComUniMan | 1.3.6.1.4.1.2011.10.2.83.4 | |||
h3cEOCComUniManTable | 1.3.6.1.4.1.2011.10.2.83.4.1 | no-access |
This table defines several user network interface(UNI) system parameters. |
|
1.3.6.1.4.1.2011.10.2.83.4.1.1 | no-access |
The entry of h3cEOCComUniManTable. |
||
h3cEOCUniIndex | 1.3.6.1.4.1.2011.10.2.83.4.1.1.1 | unsigned32 | no-access |
The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU. |
h3cEOCComUniDescr | 1.3.6.1.4.1.2011.10.2.83.4.1.1.2 | displaystring | read-only |
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software. |
h3cEOCComUniStatus | 1.3.6.1.4.1.2011.10.2.83.4.1.1.3 | integer | read-write |
The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, h3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state). Enumeration: 'down': 2, 'testing': 3, 'up': 1. |
h3cEOCComUniSpeed | 1.3.6.1.4.1.2011.10.2.83.4.1.1.4 | integer | read-write |
User network interface speed. Enumeration: 's100M': 100, 'auto': 1, 's10M': 10. |
h3cEOCComUniDuplex | 1.3.6.1.4.1.2011.10.2.83.4.1.1.5 | integer | read-write |
User network interface mode. Enumeration: 'auto': 3, 'full': 1, 'half': 2. |
h3cEOCComUniCurrentSpeed | 1.3.6.1.4.1.2011.10.2.83.4.1.1.6 | gauge32 | read-only |
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero. |
h3cEOCComUniCurrentDuplex | 1.3.6.1.4.1.2011.10.2.83.4.1.1.7 | integer | read-only |
The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy. Enumeration: 'unknown': 3, 'full': 1, 'half': 2. |
h3cEOCComUniMdi | 1.3.6.1.4.1.2011.10.2.83.4.1.1.8 | integer | read-write |
Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing). Enumeration: 'mdi-x': 2, 'mdi-auto': 3, 'mdi-ii': 1. |
h3cEOCComUniFlowControl | 1.3.6.1.4.1.2011.10.2.83.4.1.1.9 | truthvalue | read-write |
Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable. |
h3cEOCComUniCountReset | 1.3.6.1.4.1.2011.10.2.83.4.1.1.10 | integer | read-write |
Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object. Enumeration: 'reset': 1. |
h3cEOCComUniAlias | 1.3.6.1.4.1.2011.10.2.83.4.1.1.11 | displaystring | read-write |
This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of h3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of h3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the h3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and h3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of h3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces. |
h3cEOCComUniType | 1.3.6.1.4.1.2011.10.2.83.4.1.1.12 | ianaiftype | read-only |
The type of interface. Additional values for h3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention. |
h3cEOCComUniVLANType | 1.3.6.1.4.1.2011.10.2.83.4.1.1.13 | integer | read-write |
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. Enumeration: 'access': 2, 'hybrid': 3, 'fabric': 4, 'vLANTrunk': 1. |
h3cEOCComUniPvid | 1.3.6.1.4.1.2011.10.2.83.4.1.1.14 | integer32 | read-write |
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. |
h3cEOCComUniVlanTag | 1.3.6.1.4.1.2011.10.2.83.4.1.1.15 | integer | read-write |
VLAN is set tagged or untagged. Enumeration: 'untagged': 2, 'tagged': 1. |
h3cEOCComUniPriority | 1.3.6.1.4.1.2011.10.2.83.4.1.1.16 | integer32 | read-write |
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. |
h3cEOCComUniUpLineRate | 1.3.6.1.4.1.2011.10.2.83.4.1.1.17 | unsigned32 | read-write |
The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. |
h3cEOCComUniDownLineRate | 1.3.6.1.4.1.2011.10.2.83.4.1.1.18 | unsigned32 | read-write |
The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. |
h3cEOCComUniAdminStatus | 1.3.6.1.4.1.2011.10.2.83.4.1.1.19 | integer | read-write |
Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard. Enumeration: 'down': 2, 'up': 1. |
h3cEOCComUniCountTable | 1.3.6.1.4.1.2011.10.2.83.4.2 | no-access |
A list of interface counter about frames entries. |
|
1.3.6.1.4.1.2011.10.2.83.4.2.1 | no-access |
An entry containing management information applicable to a particular interface. |
||
h3cEOCUniInPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.1 | unsigned32 | read-only |
The total number of packets (including bad packets, broadcast packets, and multicast packets) received. |
h3cEOCUniInUPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.2 | unsigned32 | read-only |
The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets. |
h3cEOCUniInBPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.3 | unsigned32 | read-only |
The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets. |
h3cEOCUniInMPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.4 | unsigned32 | read-only |
The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address. |
h3cEOCUniInPausePkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.5 | unsigned32 | read-only |
A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
h3cEOCUniInTotalErrors | 1.3.6.1.4.1.2011.10.2.83.4.2.1.6 | unsigned32 | read-only |
Total count of the error packets received on this interface. |
h3cEOCUniInCRCErrs | 1.3.6.1.4.1.2011.10.2.83.4.2.1.7 | unsigned32 | read-only |
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
h3cEOCUniInUndersizePkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.8 | unsigned32 | read-only |
The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed. |
h3cEOCUniInOversizePkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.9 | unsigned32 | read-only |
The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed. |
h3cEOCUniInErrorbyOther | 1.3.6.1.4.1.2011.10.2.83.4.2.1.10 | unsigned32 | read-only |
The total number of other error packets received on this interface. |
h3cEOCUniInOctets | 1.3.6.1.4.1.2011.10.2.83.4.2.1.11 | unsigned32 | read-only |
The total number of octets received on this interface. |
h3cEOCUniOutPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.12 | unsigned32 | read-only |
The total number of packets (including bad packets, broadcast packets, and multicast packets) sent. |
h3cEOCUniOutUPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.13 | unsigned32 | read-only |
The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets. |
h3cEOCUniOutBPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.14 | unsigned32 | read-only |
The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets. |
h3cEOCUniOutMPkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.15 | unsigned32 | read-only |
The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address. |
h3cEOCUniOutPausePkts | 1.3.6.1.4.1.2011.10.2.83.4.2.1.16 | unsigned32 | read-only |
The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
h3cEOCUniOutTotalErrors | 1.3.6.1.4.1.2011.10.2.83.4.2.1.17 | unsigned32 | read-only |
The total number of error packets sent on this interface. |
h3cEOCUniOutCollisions | 1.3.6.1.4.1.2011.10.2.83.4.2.1.18 | unsigned32 | read-only |
The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected. |
h3cEOCUniOutDelayExceedDsds | 1.3.6.1.4.1.2011.10.2.83.4.2.1.19 | unsigned32 | read-only |
The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
h3cEOCUniOutErrorbyOther | 1.3.6.1.4.1.2011.10.2.83.4.2.1.20 | unsigned32 | read-only |
The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets. |
h3cEOCUniOutDroppedFrames | 1.3.6.1.4.1.2011.10.2.83.4.2.1.21 | unsigned32 | read-only |
The total number of frames dropped because of buffer failure. |
h3cEOCUniOutOctets | 1.3.6.1.4.1.2011.10.2.83.4.2.1.22 | unsigned32 | read-only |
The total number of octets transmitted out of the interface. |
h3cEOCCommonTrap | 1.3.6.1.4.1.2011.10.2.83.5 | |||
h3cEOCTrapPrefix | 1.3.6.1.4.1.2011.10.2.83.5.0 | |||
h3cEOCCnuRegExcessTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.1 |
A h3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit. |
||
h3cEOCCnuRegExcessRecoverTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.2 |
A h3cEOCCnuRegExcessRecoverTrap notification is sent when h3cEOCCnuRegExcessTrap is detected and then recoverd. |
||
h3cEOCCnuRegSuccTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.3 |
A h3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful. |
||
h3cEOCCnuOffLineTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.4 |
A h3cEOCCnuOffLineTrap notification is sent when a CNU offline. |
||
h3cEOCCnuLinkupTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.5 |
A h3cEOCCnuLinkupTrap notification is sent when a CNU linkup. |
||
h3cEOCOamDisconnectTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.6 |
A h3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. |
||
h3cEOCOamDisconnectRecoverTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.7 |
A h3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. |
||
h3cEOCBandwidthNotEnoughTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.8 |
Bandwidth is not enough, cnu can not bind now. |
||
h3cEOCCnuAttenuationTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.9 |
A h3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing. |
||
h3cEOCCnuRegFailTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.10 |
A h3cEOCCnuRegFailTrap notification is sent when a CNU registers fail. |
||
h3cEOCCLTCablePortErrorTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.11 |
A h3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error. |
||
h3cEOCCLTCablePortErrReTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.12 |
A h3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered. |
||
h3cEOCCnuTxRateDropTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.13 |
A h3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold. |
||
h3cEOCCnuTxRateDropRecoverTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.14 |
A h3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap. |
||
h3cEOCCnuRxRateDropTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.15 |
A h3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold. |
||
h3cEOCCnuRxRateDropRecoverTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.16 |
A h3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap. |
||
h3cEOCCnuFWDownLoadErrTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.17 |
A h3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully. |
||
h3cEOCCnuFWDownLoadErrReTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.18 |
A h3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error. |
||
h3cEOCCnuDeviceTypeErrTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.19 |
A h3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier. |
||
h3cEOCCnuDeviceTypeErrReTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.20 |
A h3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover. |
||
h3cEOCCnuAutoUpdateErrTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.21 |
A h3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully. |
||
h3cEOCCnuAutoUpdateSuccTrap | 1.3.6.1.4.1.2011.10.2.83.5.0.22 |
A h3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully. |
||
h3cEOCComOnLineCnuMan | 1.3.6.1.4.1.2011.10.2.83.6 | |||
h3cEOCComCnuTypeTable | 1.3.6.1.4.1.2011.10.2.83.6.1 | no-access |
This table defines the description of cnu typ. |
|
1.3.6.1.4.1.2011.10.2.83.6.1.1 | no-access |
The entry of the table h3cEOCComCnuTypeTable. |
||
h3cEOCComCnuTypeIdx | 1.3.6.1.4.1.2011.10.2.83.6.1.1.1 | unsigned32 | no-access |
A unique value for each cnu types. Its value ranges between 1 and the value of cny typess. |
h3cEOCComCnuDescripton | 1.3.6.1.4.1.2011.10.2.83.6.1.1.2 | displaystring | read-only |
The description for unique cnu types. |
h3cEOCComCnuNumTable | 1.3.6.1.4.1.2011.10.2.83.6.2 | no-access |
This table defines the number of cnu registered in variable types of the CLT . |
|
1.3.6.1.4.1.2011.10.2.83.6.2.1 | no-access |
The entry of the table h3cEOCComCnuNumTable. |
||
h3cEOCComCnuNumber | 1.3.6.1.4.1.2011.10.2.83.6.2.1.1 | integer32 | read-only |
The number of special type of cnu that has been registerd in clt. |