H323TERMINAL-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: H323TERMINAL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h323TerminalMIB 1.3.6.1.3.323.3
This MIB module supports the functions of an ITU H.323 terminal
     h323TerminalDescr 1.3.6.1.3.323.3.1
         h323t35CountryCode 1.3.6.1.3.323.3.1.1 integer read-only
Country code, per T.35.
         h323t35CountryCodeExtention 1.3.6.1.3.323.3.1.2 integer read-only
Assigned nationally.
         h323t35ManufacturerCode 1.3.6.1.3.323.3.1.3 integer read-only
Assigned nationally.
         h323TerminalUptime 1.3.6.1.3.323.3.1.4 timeticks read-only
The amount of time (in hundredths of a second) since this H323 terminal was last initialized. Note that this is different from sysUpTime in MIB-II [ ] because sysUpTime is the uptime of the network management portion of the system.
         h323TerminalLocalTime 1.3.6.1.3.323.3.1.5 dateandtime read-write
The local date and time of day.
         h323TerminalDiagnostics 1.3.6.1.3.323.3.1.6 integer32 read-only
Indicates the results of the last diagnostic routine performed noResults(1) No diagnostic has yet been performed, passed(2) the diagnostic has been passed, hardwareFault(3) Hardware fault was detected, softwareFault(4) Software fault was detected
         h323TerminalStatus 1.3.6.1.3.323.3.1.7 integer read-only
General status of the terminal Enumeration: 'idle': 4, 'callinProgress': 2, 'callSetup': 1, 'callHangUp': 3.
     h323TerminalCaps 1.3.6.1.3.323.3.2
         h323TerminalMaxLineRate 1.3.6.1.3.323.3.2.1 integer32 read-only
This object represents maximum line rate of combined audio/video and data of this terminal.
         h323TerminalVideoCaps 1.3.6.1.3.323.3.2.2 integer32 read-only
This object represents the video capabilities of this terminal. This includes the various video algorithms that it supports. It is encoded as bits in an octet string, with the following definitions: Capability Bit # h261CIFVideo 0 h261QCIFVideo 1 h263SQCIFVideo 2 h263QCIFVideo 3 h263CIFVideo 4 h263CIF4Video 5 h263CIF16Video 6 h262SPMLSIFVideo 7 h262SPML2SIFVideo 8 h262SPML4SIFVideo 9 h262MPMLSIFVideo 10 h262MPML2SIFVideo 11 h262MPML4SIFVideo 12 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the capability is supported, a zero bit encodes that the capability is not supported.
         h323TerminalMaxVideoRate 1.3.6.1.3.323.3.2.3 integer32 read-only
The maximum bit rate that the video channel can do.
         h323TerminalAudioCaps 1.3.6.1.3.323.3.2.4 integer32 read-only
This object represents the audio capabilities of this terminal. This includes the various audio algorithms that it supports. It is encoded as bits in an octet string, with the following definitions: Capability Bit # g711-ALaw64KAudio 0 g711-ALaw56KAudio 1 g711-ULaw64KAudio 2 g711-ULaw56KAudio 3 g722-64KAudio 4 g722-56KAudio 5 g722-48KAudio 6 g728Audio 7 g723.1-5.3KAudio 8 g723.1-6.4KAudio 9 g729Audio 10 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the capability is supported, a zero bit encodes that the capability is not supported.
         h323TerminalDataCaps 1.3.6.1.3.323.3.2.5 integer32 read-only
This object represents the data application capability of the terminal. It is encoded as bits in an octet string, with the following definitions: Capability Bit # t.120 0 dsm-cc 1 userData 2 t84 3 t434 4 h224 5 nlpid 6 dsvdControl 7 h222DataPartitioning 8 t30fax 9 t140 10 Others 11 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the capability is supported, a zero bit encodes that the capability is not supported.
         h323TerminalEncrypCaps 1.3.6.1.3.323.3.2.6 integer32 read-only
This object represents the encryption capability of the terminal. Capability Bit # H.235 0 Others 1 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the capability is supported, a zero bit encodes that the capability is not supported.
         h323TerminalRDCCaps 1.3.6.1.3.323.3.2.7 integer32 read-only
This object represents the Remote Device Control capability of the terminal. FECC 0 -- Far-end Camera Control Others 1 Bits are numbered starting with the most significant bit of the first byte being bit 0, the least significant bit of the first byte being bit 7, the most significant bit of the second byte being bit 8, and so on. A one bit encodes that the capability is supported, a zero bit encodes that the capability is not supported.
     h323TerminalConfig 1.3.6.1.3.323.3.3
         h323TerminalSiteName 1.3.6.1.3.323.3.3.1 displaystring read-write
Name of the site where the H323 terminal is located.
         h323TerminalVideoSystem 1.3.6.1.3.323.3.3.2 integer read-write
Video format standard Enumeration: 'pal': 2, 'secam': 3, 'ntsc': 1, 'others': 4.
         h323TerminalfType 1.3.6.1.3.323.3.3.3 integer32 read-write
The interface type on which this site can be called. The interface type identified by this value is the same type of as the ifType from Interface Table in RFC1213.
         h323TerminalIPAddress 1.3.6.1.3.323.3.3.4 ipaddress read-write
The IP address of the terminal.
     h323TerminalControl 1.3.6.1.3.323.3.4
         h323TerminalAdminControl 1.3.6.1.3.323.3.4.1 integer read-write
The desired state of the H323 terminal. Setting the value if this object to these values will have the following actions: run(1) The H323 terminal will enter the run state, reset(2) The H323 terminal will reset, diagnose(3) Will activate the diagnostic routine stop(4) Will halt the H323 terminal. Enumeration: 'reset': 2, 'diagnose': 3, 'stop': 4, 'run': 1.
         h323TerminalCallSetUp 1.3.6.1.3.323.3.4.2 integer32 read-write
establish a call to another video conference terminal. Set this value to the index of the site of the video conference site you want to dial in the Site Table and the system will be dialed.
         h323TerminalCallHangup 1.3.6.1.3.323.3.4.3 integer32 read-write
Hang up the video conference call in progess now.
         h323EnableLocalLoopback 1.3.6.1.3.323.3.4.4 integer read-write
Enable or disable local loop back on a video conference system. Local loopbacks loop back the audio, video and data streams in a call. Once looped back, a new call will show up in the Call Table and the user can observe the audio/video/data rates to assure that these components are working properly. Enumeration: 'enable': 1, 'disable': 2.
         h323EnableRemoteLoopback 1.3.6.1.3.323.3.4.5 integer read-write
Enable or disable remote loop back on a video conference system. Remote loopbacks loop back the audio and video streams from the remote system in a call.. When the remote system calls in, a new call will show up in the Call Table and the user can observe the audio/video/data rates to assure that these components are coming in properly from the remote system. Enumeration: 'enable': 1, 'disable': 2.
     h323TerminalMIBConfs 1.3.6.1.3.323.3.5
         h323TerminalMIBGroups 1.3.6.1.3.323.3.5.1
             h323TerminalDesrGroup 1.3.6.1.3.323.3.5.1.1
A collection of objects providing the description of the terminal
             h323TerminalCapsGroup 1.3.6.1.3.323.3.5.1.2
A collection of objects providing capabilities of the terminal
             h323TerminalConfigGroup 1.3.6.1.3.323.3.5.1.3
A collection of objects providing the ability to configure the terminal
             h323TerminalControlGroup 1.3.6.1.3.323.3.5.1.4
A collection of objects providing the ability to invoke terminal functions
         h323TerminalMIBCompl 1.3.6.1.3.323.3.5.2
             h323TerminalCompliance 1.3.6.1.3.323.3.5.2.1
The set of objects required for compliance