GSMP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: GSMP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, RMON2-MIB, ATM-TC-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gsmpMIB 1.3.6.1.2.1.98
This MIB contains managed object definitions for the General Switch Management Protocol, GSMP, version 3
       gsmpNotifications 1.3.6.1.2.1.98.0
           gsmpSessionDown 1.3.6.1.2.1.98.0.1
When it has been enabled, this notification is generated whenever a session is taken down, regardless of whether the session went down normally or not. Its purpose is to allow a management application (primarily an accounting application) that is monitoring the session statistics to receive the final values of these counters, so that the application can properly account for the amounts the counters were incremented since the last time the application polled them. The gsmpSessionStartUptime object provides the total amount of time that the session was active. This notification is not a substitute for polling the session statistic counts. In particular, the count values reported in this notification cannot be assumed to be the complete totals for the life of the session, since they may have wrapped while the session was up. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifiers of the objects contained in the notification. An instance of this notification will contain exactly one instance of each of its objects, and these objects will all belong to the same conceptual row of the gsmpSessionTable.
           gsmpSessionUp 1.3.6.1.2.1.98.0.2
When it has been enabled, this notification is generated when new session is established. The new session is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionFarSideInstance object contained in the notification.
           gsmpSentFailureInd 1.3.6.1.2.1.98.0.3
When it has been enabled, this notification is generated when a message with a failure indication was sent. The notification indicates a change in the value of gsmpSessionStatFailureInds. The gsmpSessionLastFailureCode contains the failure reason. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifiers of the objects contained in the notification.
           gsmpReceivedFailureInd 1.3.6.1.2.1.98.0.4
When it has been enabled, this notification is generate when a message with a failure indication is received. The notification indicates a change in the value of gsmpSessionStatReceivedFailures. The gsmpSessionLastFailureCode contains the failure reason. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifiers of the objects contained in the notification.
           gsmpPortUpEvent 1.3.6.1.2.1.98.0.5
When it has been enabled, this notification is generated when a Port Up Event occurs. The notification indicates a change in the value of gsmpSessionStatPortUpEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionStatPortUpEvents object contained in the notification.
           gsmpPortDownEvent 1.3.6.1.2.1.98.0.6
When it has been enabled, this notification is generated when a Port Down Event occurs. The notification indicates a change in the value of gsmpSessionStatPortDownEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionStatPortDownEvents object contained in the notification.
           gsmpInvalidLabelEvent 1.3.6.1.2.1.98.0.7
When it has been enabled, this notification is generated when an Invalid Label Event occurs. The notification indicates a change in the value of gsmpSessionStatInvLabelEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionStatInvLabelEvents object contained in the notification.
           gsmpNewPortEvent 1.3.6.1.2.1.98.0.8
When it has been enabled, this notification is generated when a New Port Event occurs. The notification indicates a change in the value of gsmpSessionStatNewPortEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionStatNewPortEvents object contained in the notification.
           gsmpDeadPortEvent 1.3.6.1.2.1.98.0.9
When it has been enabled, this notification is generated when a Dead Port Event occurs. The notification indicates a change in the value of gsmpSessionStatDeadPortEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionStatDeadPortEvents object contained in the notification.
           gsmpAdjacencyUpdateEvent 1.3.6.1.2.1.98.0.10
When it has been enabled, this notification is generated when an Adjacency Update Event occurs. The gsmpSessionAdjacencyCount contains the new value of the number of adjacencies that are established with controllers and the switch partition that is used for this session. The notification indicates a change in the value of gsmpSessionStatAdjUpdateEvents. The session to which this notification applies is identified by the gsmpSessionThisSideId and gsmpSessionFarSideId which could be inferred from the Object Identifier of the gsmpSessionAdjacencyCount or the gsmpSessionStatAdjUpdateEvents object contained in the notification.
       gsmpObjects 1.3.6.1.2.1.98.1
           gsmpControllerTable 1.3.6.1.2.1.98.1.1 no-access
This table represents the Switch Controller Entities. An entry in this table needs to be configured (created) before a GSMP session might be started.
               gsmpControllerEntry 1.3.6.1.2.1.98.1.1.1 no-access
An entry in the table showing the data for a specific Switch Controller Entity. If partitions are used, one entity corresponds to one specific switch partition. Depending of the encapsulation used, a corresponding row in the gsmpAtmEncapTable or the gsmpTcpIpEncapTable may have been created.
                   gsmpControllerEntityId 1.3.6.1.2.1.98.1.1.1.1 gsmpnametype no-access
The Switch Controller Entity Id is unique within the operational context of the device.
                   gsmpControllerMaxVersion 1.3.6.1.2.1.98.1.1.1.2 gsmpversion read-only
The max version number of the GSMP protocol being used in this session. The version is negotiated by the adjacency protocol.
                   gsmpControllerTimer 1.3.6.1.2.1.98.1.1.1.3 unsigned32 read-only
The timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms.
                   gsmpControllerPort 1.3.6.1.2.1.98.1.1.1.4 unsigned32 read-only
The local port number for the Switch Controller Entity.
                   gsmpControllerInstance 1.3.6.1.2.1.98.1.1.1.5 unsigned32 read-only
The instance number for the Switch Controller Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. Zero is not a valid instance number.
                   gsmpControllerPartitionType 1.3.6.1.2.1.98.1.1.1.6 gsmppartitiontype read-only
A controller can request the specific partition identifier to the session by setting the Partition Type to fixedPartitionRequest(2). A controller can let the switch decide whether it wants to assign a fixed partition ID or not, by setting the Partition Type to noPartition(1).
                   gsmpControllerPartitionId 1.3.6.1.2.1.98.1.1.1.7 gsmppartitionidtype read-only
The Id for the specific switch partition that this Switch Controller is concerned with. If partitions are not used or if the controller lets the switch assigns Partition ID, i.e Partition Type = noPartition(1), then this object is undefined.
                   gsmpControllerDoResync 1.3.6.1.2.1.98.1.1.1.8 truthvalue read-only
This object specifies whether the controller should resynchronise or reset in case of loss of synchronisation. If this object is set to true then the Controller should resync with PFLAG=2 (recovered adjacency).
                   gsmpControllerNotificationMap 1.3.6.1.2.1.98.1.1.1.9 bits read-only
This bitmap defines whether a corresponding SNMP notification should be sent if a GSMP event is received by the Switch Controller. If the bit is set to 1 a notification should be sent. The handling and filtering of the SNMP notifications are then further specified in the SNMP notification originator application. Bits: 'sessionUp': 1, 'sessionDown': 0, 'portUpEvent': 4, 'sendFailureIndication': 2, 'receivedFailureIndication': 3, 'adjacencyUpdateEvent': 9, 'newPortEvent': 7, 'portDownEvent': 5, 'deadPortEvent': 8, 'invalidLabelEvent': 6.
                   gsmpControllerSessionState 1.3.6.1.2.1.98.1.1.1.10 integer read-only
The state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session is in NULL state as defined in the GSMP specification. Enumeration: 'null': 1, 'estab': 4, 'synrcvd': 3, 'synsent': 2.
                   gsmpControllerStorageType 1.3.6.1.2.1.98.1.1.1.11 storagetype read-only
The storage type for this controller entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
                   gsmpControllerRowStatus 1.3.6.1.2.1.98.1.1.1.12 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpControllerNotificationMap and the gsmpControllerRowStatus objects.
           gsmpSwitchTable 1.3.6.1.2.1.98.1.2 no-access
This table represents the Switch Entities. An entry in this table needs to be configured (created) before a GSMP session might be started.
               gsmpSwitchEntry 1.3.6.1.2.1.98.1.2.1 no-access
An entry in the table showing the data for a specific Switch Entity. If partitions are used, one entity corresponds to one specific switch partition. Depending of the encapsulation used, a corresponding row in the gsmpAtmEncapTable or the gsmpTcpIpEncapTable may have been created.
                   gsmpSwitchEntityId 1.3.6.1.2.1.98.1.2.1.1 gsmpnametype no-access
The Switch Entity Id is unique within the operational context of the device.
                   gsmpSwitchMaxVersion 1.3.6.1.2.1.98.1.2.1.2 gsmpversion read-only
The max version number of the GSMP protocol being supported by this Switch. The version is negotiated by the adjacency protocol.
                   gsmpSwitchTimer 1.3.6.1.2.1.98.1.2.1.3 unsigned32 read-only
The timer specifies the nominal time between periodic adjacency protocol messages. It is a constant for the duration of a GSMP session. The timer is specified in units of 100ms.
                   gsmpSwitchName 1.3.6.1.2.1.98.1.2.1.4 gsmpnametype read-only
The name of the Switch. The first three octets must be an Organisationally Unique Identifier (OUI) that identifies the manufacturer of the Switch. This is by default set to the same value as the gsmpSwitchId object if not separately specified.
                   gsmpSwitchPort 1.3.6.1.2.1.98.1.2.1.5 unsigned32 read-only
The local port number for this Switch Entity.
                   gsmpSwitchInstance 1.3.6.1.2.1.98.1.2.1.6 unsigned32 read-only
The instance number for the Switch Entity. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. Zero is not a valid instance number.
                   gsmpSwitchPartitionType 1.3.6.1.2.1.98.1.2.1.7 gsmppartitiontype read-only
A switch can assign the specific partition identifier to the session by setting the Partition Type to fixedPartitionAssigned(3). A switch can specify that no partitions are handled in the session by setting the Partition Type to noPartition(1).
                   gsmpSwitchPartitionId 1.3.6.1.2.1.98.1.2.1.8 gsmppartitionidtype read-only
The Id for this specific switch partition that the switch entity represents. If partitions are not used, i.e. Partition Type = noPartition(1), then this object is undefined.
                   gsmpSwitchNotificationMap 1.3.6.1.2.1.98.1.2.1.9 bits read-only
This bitmap defines whether a corresponding SNMP notification should be sent if an GSMP event is sent by the Switch Entity. If the bit is set to 1 a notification should be sent. The handling and filtering of the SNMP notifications are then further specified in the SNMP notification originator application. Bits: 'sessionUp': 1, 'sessionDown': 0, 'portUpEvent': 4, 'sendFailureIndication': 2, 'receivedFailureIndication': 3, 'adjacencyUpdateEvent': 9, 'newPortEvent': 7, 'portDownEvent': 5, 'deadPortEvent': 8, 'invalidLabelEvent': 6.
                   gsmpSwitchSwitchType 1.3.6.1.2.1.98.1.2.1.10 octet string read-only
A 16-bit field allocated by the manufacturer of the switch. The Switch Type identifies the product. When the Switch Type is combined with the OUI from the Switch Name the product is uniquely identified.
                   gsmpSwitchWindowSize 1.3.6.1.2.1.98.1.2.1.11 unsigned32 read-only
The maximum number of unacknowledged request messages that may be transmitted by the controller without the possibility of loss. This field is used to prevent request messages from being lost in the switch because of overflow in the receive buffer. The field is a hint to the controller.
                   gsmpSwitchSessionState 1.3.6.1.2.1.98.1.2.1.12 integer read-only
The state for the existing or potential session that this entity is concerned with. The NULL state is returned if the proper encapsulation data is not yet configured, if the row is not in active status or if the session is in NULL state as defined in the GSMP specification. Enumeration: 'null': 1, 'estab': 4, 'synrcvd': 3, 'synsent': 2.
                   gsmpSwitchStorageType 1.3.6.1.2.1.98.1.2.1.13 storagetype read-only
The storage type for this switch entity. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
                   gsmpSwitchRowStatus 1.3.6.1.2.1.98.1.2.1.14 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpSwitchNotificationMap and the gsmpSwitchRowStatus objects.
           gsmpAtmEncapTable 1.3.6.1.2.1.98.1.3 no-access
This table contains the atm encapsulation data for the Controller or Switch that uses atm aal5 as encapsulation.
               gsmpAtmEncapEntry 1.3.6.1.2.1.98.1.3.1 no-access
An entry in the table showing the encapsulation data for a specific Switch Controller entity or Switch entity.
                   gsmpAtmEncapEntityId 1.3.6.1.2.1.98.1.3.1.1 gsmpnametype no-access
The Controller Id or Switch Id that is unique within the operational context of the device.
                   gsmpAtmEncapIfIndex 1.3.6.1.2.1.98.1.3.1.2 interfaceindex read-only
The interface index for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.
                   gsmpAtmEncapVpi 1.3.6.1.2.1.98.1.3.1.3 atmvpidentifier read-only
The VPI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.
                   gsmpAtmEncapVci 1.3.6.1.2.1.98.1.3.1.4 atmvcidentifier read-only
The VCI value for the virtual channel over which the GSMP session is established, i.e., the GSMP control channel for LLC/SNAP encapsulated GSMP messages on an ATM data link layer.
                   gsmpAtmEncapStorageType 1.3.6.1.2.1.98.1.3.1.5 storagetype read-only
The storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.
                   gsmpAtmEncapRowStatus 1.3.6.1.2.1.98.1.3.1.6 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpAtmEncapRowStatus object.
           gsmpTcpIpEncapTable 1.3.6.1.2.1.98.1.4 no-access
This table contains the encapsulation data for the Controller or Switch that uses TCP/IP as encapsulation.
               gsmpTcpIpEncapEntry 1.3.6.1.2.1.98.1.4.1 no-access
An entry in the table showing the encapsulation data for a specific Switch Controller entity or Switch entity.
                   gsmpTcpIpEncapEntityId 1.3.6.1.2.1.98.1.4.1.1 gsmpnametype no-access
The Controller or Switch Id is unique within the operational context of the device.
                   gsmpTcpIpEncapAddressType 1.3.6.1.2.1.98.1.4.1.2 inetaddresstype read-only
The type of address in gsmpTcpIpEncapAddress.
                   gsmpTcpIpEncapAddress 1.3.6.1.2.1.98.1.4.1.3 inetaddress read-only
The IPv4 or IPv6 address used for the GSMP session peer.
                   gsmpTcpIpEncapPortNumber 1.3.6.1.2.1.98.1.4.1.4 inetportnumber read-only
The TCP port number used for the TCP session establishment to the GSMP peer.
                   gsmpTcpIpEncapStorageType 1.3.6.1.2.1.98.1.4.1.5 storagetype read-only
The storage type for this entry. It should have the same value as the StorageType in the referring Switch Controller entity or Switch entity.
                   gsmpTcpIpEncapRowStatus 1.3.6.1.2.1.98.1.4.1.6 rowstatus read-only
An object that allows entries in this table to be created and deleted using the RowStatus convention. While the row is in active state it's not possible to modify the value of any object for that row except the gsmpTcpIpEncapRowStatus object.
           gsmpSessionTable 1.3.6.1.2.1.98.1.5 no-access
This table represents the sessions between Controller and Switch pairs.
               gsmpSessionEntry 1.3.6.1.2.1.98.1.5.1 no-access
An entry in the table showing the session data for a specific Controller and Switch pair. Also, statistics for this specific session is shown.
                   gsmpSessionThisSideId 1.3.6.1.2.1.98.1.5.1.1 gsmpnametype no-access
This side ID uniquely identifies the entity that this session relates to within the operational context of the device.
                   gsmpSessionFarSideId 1.3.6.1.2.1.98.1.5.1.2 gsmpnametype no-access
The Far side ID uniquely identifies the entity that this session is established against.
                   gsmpSessionVersion 1.3.6.1.2.1.98.1.5.1.3 gsmpversion read-only
The version number of the GSMP protocol being used in this session. The version is the result of the negotiation by the adjacency protocol.
                   gsmpSessionTimer 1.3.6.1.2.1.98.1.5.1.4 integer32 read-only
The timer specifies the time remaining until the adjacency timer expires. The object could take negative values since if no valid GSMP messages are received in any period of time in excess of three times the value of the Timer negotiated by the adjacency protocol loss of synchronisation may be declared. The timer is specified in units of 100ms.
                   gsmpSessionPartitionId 1.3.6.1.2.1.98.1.5.1.5 gsmppartitionidtype read-only
The Partition Id for the specific switch partition that this session is concerned with.
                   gsmpSessionAdjacencyCount 1.3.6.1.2.1.98.1.5.1.6 unsigned32 read-only
This object specifies the current number of adjacencies that are established with controllers and the switch partition that is used for this session. The value includes this session.
                   gsmpSessionFarSideName 1.3.6.1.2.1.98.1.5.1.7 gsmpnametype read-only
The name of the far side as advertised in the adjacency message.
                   gsmpSessionFarSidePort 1.3.6.1.2.1.98.1.5.1.8 unsigned32 read-only
The local port number of the link across which the message is being sent.
                   gsmpSessionFarSideInstance 1.3.6.1.2.1.98.1.5.1.9 unsigned32 read-only
The instance number used for the link during this session. The Instance number is a 24-bit number that should be guaranteed to be unique within the recent past and to change when the link or node comes back up after going down. Zero is not a valid instance number.
                   gsmpSessionLastFailureCode 1.3.6.1.2.1.98.1.5.1.10 unsigned32 read-only
This is the last failure code that was received over this session. If no failure code have been received, the value is zero.
                   gsmpSessionDiscontinuityTime 1.3.6.1.2.1.98.1.5.1.11 timestamp read-only
The value of sysUpTime on the most recent occasion at which one or more of this session's counters suffered a discontinuity. If no such discontinuities have occurred since then, this object contains the same timestamp as gsmpSessionStartUptime .
                   gsmpSessionStartUptime 1.3.6.1.2.1.98.1.5.1.12 timestamp read-only
The value of sysUpTime when the session came to established state.
                   gsmpSessionStatSentMessages 1.3.6.1.2.1.98.1.5.1.13 zerobasedcounter32 read-only
The number of messages that have been sent in this session. All GSMP messages pertaining to this session after the session came to established state SHALL be counted, also including adjacency protocol messages and failure response messages. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatFailureInds 1.3.6.1.2.1.98.1.5.1.14 zerobasedcounter32 read-only
The number of messages that have been sent with a failure indication in this session. Warning messages SHALL NOT be counted. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatReceivedMessages 1.3.6.1.2.1.98.1.5.1.15 zerobasedcounter32 read-only
The number of messages that have been received in this session. All legal GSMP messages pertaining to this session after the session came to established state SHALL be counted, also including adjacency protocol messages and failure response messages. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatReceivedFailures 1.3.6.1.2.1.98.1.5.1.16 zerobasedcounter32 read-only
The number of messages that have been received in this session with a failure indication. Warning messages SHALL NOT be counted. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatPortUpEvents 1.3.6.1.2.1.98.1.5.1.17 zerobasedcounter32 read-only
The number of Port Up events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatPortDownEvents 1.3.6.1.2.1.98.1.5.1.18 zerobasedcounter32 read-only
The number of Port Down events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatInvLabelEvents 1.3.6.1.2.1.98.1.5.1.19 zerobasedcounter32 read-only
The number of Invalid label events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatNewPortEvents 1.3.6.1.2.1.98.1.5.1.20 zerobasedcounter32 read-only
The number of New Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatDeadPortEvents 1.3.6.1.2.1.98.1.5.1.21 zerobasedcounter32 read-only
The number of Dead Port events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
                   gsmpSessionStatAdjUpdateEvents 1.3.6.1.2.1.98.1.5.1.22 zerobasedcounter32 read-only
The number of Adjacency Update events that have been sent or received on this session. When the counter suffers any discontinuity, then the gsmpSessionDiscontinuityTime object indicates when it happened.
       gsmpNotificationsObjects 1.3.6.1.2.1.98.2
           gsmpEventPort 1.3.6.1.2.1.98.2.1 unsigned32 no-access
This object specifies the Port Number that is carried in this event.
           gsmpEventPortSessionNumber 1.3.6.1.2.1.98.2.2 unsigned32 no-access
This object specifies the Port Session Number that is carried in this event.
           gsmpEventSequenceNumber 1.3.6.1.2.1.98.2.3 unsigned32 no-access
This object specifies the Event Sequence Number that is carried in this event.
           gsmpEventLabel 1.3.6.1.2.1.98.2.4 gsmplabeltype no-access
This object specifies the Label that is carried in this event.
       gsmpConformance 1.3.6.1.2.1.98.3
           gsmpGroups 1.3.6.1.2.1.98.3.1
               gsmpGeneralGroup 1.3.6.1.2.1.98.3.1.1
Objects that apply to all GSMP implementations.
               gsmpControllerGroup 1.3.6.1.2.1.98.3.1.2
Objects that apply GSMP implementations of Switch Controllers.
               gsmpSwitchGroup 1.3.6.1.2.1.98.3.1.3
Objects that apply GSMP implementations of Switches.
               gsmpAtmEncapGroup 1.3.6.1.2.1.98.3.1.4
Objects that apply to GSMP implementations that supports ATM for GSMP encapsulation.
               gsmpTcpIpEncapGroup 1.3.6.1.2.1.98.3.1.5
Objects that apply to GSMP implementations that supports TCP/IP for GSMP encapsulation.
               gsmpNotificationObjectsGroup 1.3.6.1.2.1.98.3.1.6
Objects that are contained in the notifications.
               gsmpNotificationsGroup 1.3.6.1.2.1.98.3.1.7
The notifications which indicate specific changes in the value of objects gsmpSessionTable
           gsmpCompliances 1.3.6.1.2.1.98.3.2
               gsmpModuleCompliance 1.3.6.1.2.1.98.3.2.1
The compliance statement for agents that support the GSMP MIB.