GSM7324-SWITCHING-MIB: View SNMP OID List / Download MIB

VENDOR: NETGEAR


 Home MIB: GSM7324-SWITCHING-MIB
Download as:   
SNMPv2-CONF, GSM7324-REF-MIB, IF-MIB, SNMPv2-SMI, IANAifType-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gsm7324Switching 1.3.6.1.4.1.4526.1.7.1
     agentInfoGroup 1.3.6.1.4.1.4526.1.7.1.1
         agentInventoryGroup 1.3.6.1.4.1.4526.1.7.1.1.1
             agentInventorySysDescription 1.3.6.1.4.1.4526.1.7.1.1.1.1 displaystring read-only
The switch's Inventory system description.
             agentInventoryMachineType 1.3.6.1.4.1.4526.1.7.1.1.1.2 displaystring read-only
Type of the Machine used in the Switch
             agentInventoryBurnedInMacAddress 1.3.6.1.4.1.4526.1.7.1.1.1.3 physaddress read-only
Burned-In MAC Address
             agentInventoryAdditionalPackages 1.3.6.1.4.1.4526.1.7.1.1.1.4 displaystring read-only
Lists additional functional packages available on this unit.
             agentInventorySoftwareVersion 1.3.6.1.4.1.4526.1.7.1.1.1.5 displaystring read-only
Lists the version of software loaded on this unit.
         agentTrapLogGroup 1.3.6.1.4.1.4526.1.7.1.1.2
             agentTrapLogTotal 1.3.6.1.4.1.4526.1.7.1.1.2.1 integer32 read-only
The total number of traps sent since last reset.
             agentTrapLogTotalSinceLastViewed 1.3.6.1.4.1.4526.1.7.1.1.2.3 integer32 read-only
The number of traps sent since last viewed.
             agentTrapLogTable 1.3.6.1.4.1.4526.1.7.1.1.2.4 no-access
Agent Trap Log
                 agentTrapLogEntry 1.3.6.1.4.1.4526.1.7.1.1.2.4.1 no-access
Agent trap log entry
                     agentTrapLogIndex 1.3.6.1.4.1.4526.1.7.1.1.2.4.1.1 integer32 read-only
Unique index of trap entry
                     agentTrapLogSystemTime 1.3.6.1.4.1.4526.1.7.1.1.2.4.1.2 displaystring read-only
System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
                     agentTrapLogTrap 1.3.6.1.4.1.4526.1.7.1.1.2.4.1.3 octet string read-only
Description of the trap sent.
         agentSupportedMibTable 1.3.6.1.4.1.4526.1.7.1.1.3 no-access
Supported MIB table
             agentSupportedMibEntry 1.3.6.1.4.1.4526.1.7.1.1.3.1 no-access
Supported MIB entry
                 agentSupportedMibIndex 1.3.6.1.4.1.4526.1.7.1.1.3.1.1 integer32 read-only
Unique index of the Supported MIB entry
                 agentSupportedMibName 1.3.6.1.4.1.4526.1.7.1.1.3.1.2 displaystring read-only
The name of the MIB (RFC or IEEE) that is supported.
                 agentSupportedMibDescription 1.3.6.1.4.1.4526.1.7.1.1.3.1.3 octet string read-only
Description of the MIB (RFC or IEEE) that is supported.
     agentConfigGroup 1.3.6.1.4.1.4526.1.7.1.2
         agentCLIConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.1
             agentLoginSessionTable 1.3.6.1.4.1.4526.1.7.1.2.1.1 no-access
A table of the switch's login session
                 agentLoginSessionEntry 1.3.6.1.4.1.4526.1.7.1.2.1.1.1 no-access
Login Session Entry
                     agentLoginSessionIndex 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.1 integer32 read-only
Agent Login Session Index of the switch
                     agentLoginSessionUserName 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.2 displaystring read-only
Agent Login Session UserName of the switch
                     agentLoginSessionIPAddress 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.3 ipaddress read-only
Agent Login Session IP Address of the switch
                     agentLoginSessionConnectionType 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.4 integer read-only
Agent Login Session Connection Type of the switch Enumeration: 'serial': 1, 'telnet': 2.
                     agentLoginSessionIdleTime 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.5 timeticks read-only
Agent Login Session Idle Time of the switch
                     agentLoginSessionSessionTime 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.6 timeticks read-only
Agent Login Session Time of the switch
                     agentLoginSessionStatus 1.3.6.1.4.1.4526.1.7.1.2.1.1.1.7 rowstatus read-write
Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
             agentTelnetConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.1.2
                 agentTelnetLoginTimeout 1.3.6.1.4.1.4526.1.7.1.2.1.2.1 integer32 read-write
Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 0 to 160. A value of 0 indicates that a Telnet session remains active indefinitely. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
                 agentTelnetMaxSessions 1.3.6.1.4.1.4526.1.7.1.2.1.2.2 integer32 read-write
Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established.
                 agentTelnetAllowNewMode 1.3.6.1.4.1.4526.1.7.1.2.1.2.3 integer read-write
Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it. Enumeration: 'enable': 1, 'disable': 2.
             agentUserConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.1.3
                 agentUserConfigCreate 1.3.6.1.4.1.4526.1.7.1.2.1.3.1 displaystring read-write
Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
                 agentUserConfigTable 1.3.6.1.4.1.4526.1.7.1.2.1.3.2 no-access
User Config Table
                     agentUserConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1 no-access
User Config Entry
                         agentUserIndex 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.1 integer32 no-access
Agent User Config Index
                         agentUserName 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.2 displaystring read-write
Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
                         agentUserPassword 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.3 displaystring read-write
Agent User Password This object will return an empty string even if a password is set.
                         agentUserAccessMode 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.4 integer read-only
Agent User Access Mode Enumeration: 'read': 1, 'write': 2.
                         agentUserStatus 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.5 rowstatus read-write
Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
                         agentUserAuthenticationType 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.6 integer read-write
SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication Enumeration: 'hmacmd5': 2, 'none': 1, 'hmacsha': 3.
                         agentUserEncryptionType 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.7 integer read-write
SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used Enumeration: 'none': 1, 'des': 2.
                         agentUserEncryptionPassword 1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.8 displaystring read-write
SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
             agentSerialGroup 1.3.6.1.4.1.4526.1.7.1.2.1.5
                 agentSerialTimeout 1.3.6.1.4.1.4526.1.7.1.2.1.5.1 integer32 read-write
agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
                 agentSerialBaudrate 1.3.6.1.4.1.4526.1.7.1.2.1.5.2 integer read-write
agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. Enumeration: 'baud-38400': 6, 'baud-115200': 8, 'baud-4800': 3, 'baud-1200': 1, 'baud-9600': 4, 'baud-2400': 2, 'baud-57600': 7, 'baud-19200': 5.
                 agentSerialCharacterSize 1.3.6.1.4.1.4526.1.7.1.2.1.5.3 integer32 read-only
agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8.
                 agentSerialHWFlowControlMode 1.3.6.1.4.1.4526.1.7.1.2.1.5.4 integer read-only
agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled. Enumeration: 'enable': 1, 'disable': 2.
                 agentSerialStopBits 1.3.6.1.4.1.4526.1.7.1.2.1.5.5 integer32 read-only
agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1.
                 agentSerialParityType 1.3.6.1.4.1.4526.1.7.1.2.1.5.6 integer read-only
agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None. Enumeration: 'even': 1, 'none': 3, 'odd': 2.
         agentLagConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.2
             agentLagConfigCreate 1.3.6.1.4.1.4526.1.7.1.2.2.1 displaystring read-write
Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name.
             agentLagSummaryConfigTable 1.3.6.1.4.1.4526.1.7.1.2.2.2 no-access
A summary table of the switch's LAG config entries
                 agentLagSummaryConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.2.2.1 no-access
Switch's LAG config entry
                     agentLagSummaryLagIndex 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.1 integer32 read-only
Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
                     agentLagSummaryName 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.2 displaystring read-write
Agent LAG Name. The associated name of the LAG used during creation.
                     agentLagSummaryFlushTimer 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.3 integer32 read-write
Agent LAG FlushTimer.
                     agentLagSummaryLinkTrap 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.4 integer read-write
Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down. Enumeration: 'enable': 1, 'disable': 2.
                     agentLagSummaryAdminMode 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.5 integer read-write
Agent LAG AdminMode. Administratively enables or disables this LAG interface. Enumeration: 'enable': 1, 'disable': 2.
                     agentLagSummaryStpMode 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.6 integer read-write
Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4) Enumeration: 'dot1s': 4, 'dot1d': 1, 'off': 3, 'fast': 2.
                     agentLagSummaryAddPort 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.7 integer32 read-write
Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
                     agentLagSummaryDeletePort 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.8 integer32 read-write
Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
                     agentLagSummaryStatus 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.9 rowstatus read-write
Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
                     agentLagSummaryType 1.3.6.1.4.1.4526.1.7.1.2.2.2.1.10 integer read-only
Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained. Enumeration: 'dynamic': 2, 'static': 1.
             agentLagDetailedConfigTable 1.3.6.1.4.1.4526.1.7.1.2.2.3 no-access
A detailed table of the switch's LAG config entries
                 agentLagDetailedConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.2.3.1 no-access
Switch's LAG config entry
                     agentLagDetailedLagIndex 1.3.6.1.4.1.4526.1.7.1.2.2.3.1.1 integer32 read-only
LAG index
                     agentLagDetailedIfIndex 1.3.6.1.4.1.4526.1.7.1.2.2.3.1.2 integer32 read-only
LAG port index
                     agentLagDetailedPortSpeed 1.3.6.1.4.1.4526.1.7.1.2.2.3.1.3 object identifier read-only
LAG port speed. See agentPortType for a description and list of valid values.
                     agentLagDetailedPortStatus 1.3.6.1.4.1.4526.1.7.1.2.2.3.1.4 integer read-only
LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG. Enumeration: 'active': 1, 'inactive': 2.
             agentLagConfigStaticCapability 1.3.6.1.4.1.4526.1.7.1.2.2.4 integer read-write
Agent LAG Static Capability. Configures whether Static LAGs are supported on this device. Enumeration: 'enable': 1, 'disable': 2.
         agentNetworkConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.3
             agentNetworkIPAddress 1.3.6.1.4.1.4526.1.7.1.2.3.1 ipaddress read-write
The switch's network ip address
             agentNetworkSubnetMask 1.3.6.1.4.1.4526.1.7.1.2.3.2 ipaddress read-write
The switch's network subnet mask
             agentNetworkDefaultGateway 1.3.6.1.4.1.4526.1.7.1.2.3.3 ipaddress read-write
The switch's network default gateway
             agentNetworkBurnedInMacAddress 1.3.6.1.4.1.4526.1.7.1.2.3.4 physaddress read-only
The switch's network Burned-In MAC address
             agentNetworkConfigProtocol 1.3.6.1.4.1.4526.1.7.1.2.3.5 integer read-write
The switch's network config protocol Enumeration: 'dhcp': 3, 'none': 1, 'bootp': 2.
             agentNetworkWebMode 1.3.6.1.4.1.4526.1.7.1.2.3.6 integer read-write
The switch's network config protocol on next bootup Enumeration: 'enable': 1, 'disable': 2.
             agentNetworkJavaMode 1.3.6.1.4.1.4526.1.7.1.2.3.7 integer read-write
Configures the use of the Java interface through the Web. Enumeration: 'enable': 1, 'disable': 2.
             agentNetworkMgmtVlan 1.3.6.1.4.1.4526.1.7.1.2.3.8 integer32 read-write
The VLAN ID through which the switch can be managed using the agentNetworkIPAddress
         agentServicePortConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.4
             agentServicePortIPAddress 1.3.6.1.4.1.4526.1.7.1.2.4.1 ipaddress read-write
The switch's ServicePort ip address
             agentServicePortSubnetMask 1.3.6.1.4.1.4526.1.7.1.2.4.2 ipaddress read-write
The switch's ServicePort subnet mask
             agentServicePortDefaultGateway 1.3.6.1.4.1.4526.1.7.1.2.4.3 ipaddress read-write
The switch's ServicePort default gateway
             agentServicePortBurnedInMacAddress 1.3.6.1.4.1.4526.1.7.1.2.4.4 physaddress read-only
The switch's ServicePort Burned-In MAC address
             agentServicePortConfigProtocol 1.3.6.1.4.1.4526.1.7.1.2.4.5 integer read-write
The switch's ServicePort config protocol Enumeration: 'dhcp': 3, 'none': 1, 'bootp': 2.
         agentSnmpConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.6
             agentSnmpCommunityCreate 1.3.6.1.4.1.4526.1.7.1.2.6.1 displaystring read-write
Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
             agentSnmpCommunityConfigTable 1.3.6.1.4.1.4526.1.7.1.2.6.2 no-access
A table of the switch's SNMP Config entries
                 agentSnmpCommunityConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.6.2.1 no-access
Switch's SNMP Config entry
                     agentSnmpCommunityIndex 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.1 integer32 read-only
The switch's Snmp Community Index
                     agentSnmpCommunityName 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.2 displaystring read-write
The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored.
                     agentSnmpCommunityIPAddress 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.3 ipaddress read-write
The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.
                     agentSnmpCommunityIPMask 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.4 ipaddress read-write
The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255.
                     agentSnmpCommunityAccessMode 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.5 integer read-write
The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed. Enumeration: 'read-write': 2, 'read-only': 1.
                     agentSnmpCommunityStatus 1.3.6.1.4.1.4526.1.7.1.2.6.2.1.6 integer read-write
The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its access right. notInService(2) - This community is not active; no SNMP requests using this community will be accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to active(1). config(3) - The community Status must be set to this value in order to configure it. When creating a new community entry, initial Status will be set to this value. destroy(4) - Set to this value to remove the community from the agent. Enumeration: 'active': 1, 'destroy': 4, 'config': 3, 'notInService': 2.
             agentSnmpTrapReceiverCreate 1.3.6.1.4.1.4526.1.7.1.2.6.3 displaystring read-write
Creates a new trap receiver entry. Defaults: IPAddress 0.0.0.0 status config
             agentSnmpTrapReceiverConfigTable 1.3.6.1.4.1.4526.1.7.1.2.6.4 no-access
Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported.
                 agentSnmpTrapReceiverConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.6.4.1 no-access
Switch's Snmp Trace Receiver Config entry
                     agentSnmpTrapReceiverIndex 1.3.6.1.4.1.4526.1.7.1.2.6.4.1.1 integer32 read-only
The switch's Snmp Trap Receiver Index
                     agentSnmpTrapReceiverCommunityName 1.3.6.1.4.1.4526.1.7.1.2.6.4.1.2 displaystring read-write
The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive.
                     agentSnmpTrapReceiverIPAddress 1.3.6.1.4.1.4526.1.7.1.2.6.4.1.3 ipaddress read-write
IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255.
                     agentSnmpTrapReceiverStatus 1.3.6.1.4.1.4526.1.7.1.2.6.4.1.4 integer read-write
The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap reciever is not active; no SNMP Traps will be sent to this reciever until it's set back to active(1). config(3) - The trap reciever Status must be set to this value in order to configure it. When creating a new trap receiver entry, the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2). destroy(4) - Set to this value to remove the trap receiver entry from the agent. Enumeration: 'active': 1, 'destroy': 4, 'config': 3, 'notInService': 2.
             agentSnmpTrapFlagsConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.6.5
                 agentSnmpAuthenticationTrapFlag 1.3.6.1.4.1.4526.1.7.1.2.6.5.1 integer read-write
Authentication Flag - Enable/Disable authentication Flag. Enumeration: 'enable': 1, 'disable': 2.
                 agentSnmpLinkUpDownTrapFlag 1.3.6.1.4.1.4526.1.7.1.2.6.5.2 integer read-write
Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable. Enumeration: 'enable': 1, 'disable': 2.
                 agentSnmpMultipleUsersTrapFlag 1.3.6.1.4.1.4526.1.7.1.2.6.5.3 integer read-write
Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session. Enumeration: 'enable': 1, 'disable': 2.
                 agentSnmpSpanningTreeTrapFlag 1.3.6.1.4.1.4526.1.7.1.2.6.5.4 integer read-write
Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps. Enumeration: 'enable': 1, 'disable': 2.
                 agentSnmpBroadcastStormTrapFlag 1.3.6.1.4.1.4526.1.7.1.2.6.5.5 integer read-write
Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery. Enumeration: 'enable': 1, 'disable': 2.
         agentSpanningTreeConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.7
             agentSpanningTreeMode 1.3.6.1.4.1.4526.1.7.1.2.7.1 integer read-write
The switch's Spanning Tree Switch Status Enumeration: 'enable': 1, 'disable': 2.
         agentSwitchConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.8
             agentSwitchBroadcastControlMode 1.3.6.1.4.1.4526.1.7.1.2.8.2 integer read-write
The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2% Enumeration: 'enable': 1, 'disable': 2.
             agentSwitchDot3FlowControlMode 1.3.6.1.4.1.4526.1.7.1.2.8.3 integer read-write
Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. Enumeration: 'enable': 1, 'disable': 2.
             agentSwitchAddressAgingTimeoutTable 1.3.6.1.4.1.4526.1.7.1.2.8.4 no-access
The switch's address aging timeout table
                 agentSwitchAddressAgingTimeoutEntry 1.3.6.1.4.1.4526.1.7.1.2.8.4.1 no-access
Aging information about a specific Filtering Database.
                     agentSwitchAddressAgingTimeout 1.3.6.1.4.1.4526.1.7.1.2.8.4.1.1 integer32 read-write
The FDB entry's address aging timeout (in seconds)
             agentSwitchIGMPSnoopingGroup 1.3.6.1.4.1.4526.1.7.1.2.8.6
                 agentSwitchIGMPSnoopingAdminMode 1.3.6.1.4.1.4526.1.7.1.2.8.6.1 integer read-write
This enables or disables IGMP Snooping on the system. Enumeration: 'enable': 1, 'disable': 2.
                 agentSwitchIGMPSnoopingGroupMembershipInterval 1.3.6.1.4.1.4526.1.7.1.2.8.6.2 integer32 read-write
The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry.
                 agentSwitchIGMPSnoopingMaxResponseTime 1.3.6.1.4.1.4526.1.7.1.2.8.6.3 integer32 read-write
The amount of time in seconds a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingQueryInterval.
                 agentSwitchIGMPSnoopingMRPExpirationTime 1.3.6.1.4.1.4526.1.7.1.2.8.6.4 integer32 read-write
Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
                 agentSwitchIGMPSnoopingPortMask 1.3.6.1.4.1.4526.1.7.1.2.8.6.5 agentportmask read-write
IGMP Snooping Port Mask. This allows configuration of IGMP Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
                 agentSwitchIGMPSnoopingMulticastControlFramesProcessed 1.3.6.1.4.1.4526.1.7.1.2.8.6.6 counter32 read-only
Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
             agentSwitchMFDBGroup 1.3.6.1.4.1.4526.1.7.1.2.8.7
                 agentSwitchMFDBTable 1.3.6.1.4.1.4526.1.7.1.2.8.7.1 no-access
The Multicast Forwarding Database table
                     agentSwitchMFDBEntry 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1 no-access
Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User.
                         agentSwitchMFDBVlanId 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.1 vlanindex read-only
Vlan Index for which this entry is associated with.
                         agentSwitchMFDBMacAddress 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.2 macaddress read-only
A multicast MAC address for which the switch has forwarding and or filtering information.
                         agentSwitchMFDBProtocolType 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.3 integer read-only
The component that is responsible for this entry in the Multicast Forwarding Database. Enumeration: 'gmrp': 2, 'static': 1, 'igmp': 3.
                         agentSwitchMFDBType 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.4 integer read-only
This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol Enumeration: 'dynamic': 2, 'static': 1.
                         agentSwitchMFDBDescription 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.5 displaystring read-only
Text description of this multicast table entry.
                         agentSwitchMFDBForwardingPortMask 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.6 agentportmask read-only
BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
                         agentSwitchMFDBFilteringPortMask 1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.7 agentportmask read-only
BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
                 agentSwitchMFDBSummaryTable 1.3.6.1.4.1.4526.1.7.1.2.8.7.2 no-access
The Multicast Forwarding Database Summary table
                     agentSwitchMFDBSummaryEntry 1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1 no-access
Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
                         agentSwitchMFDBSummaryVlanId 1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.1 vlanindex read-only
Vlan Index for which this entry is associated with.
                         agentSwitchMFDBSummaryMacAddress 1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.2 macaddress read-only
A multicast MAC address for which the switch has forwarding and or filtering information.
                         agentSwitchMFDBSummaryForwardingPortMask 1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.3 agentportmask read-only
Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
                 agentSwitchMFDBMaxTableEntries 1.3.6.1.4.1.4526.1.7.1.2.8.7.3 gauge32 read-only
This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table.
                 agentSwitchMFDBMostEntriesUsed 1.3.6.1.4.1.4526.1.7.1.2.8.7.4 gauge32 read-only
This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark.
                 agentSwitchMFDBCurrentEntries 1.3.6.1.4.1.4526.1.7.1.2.8.7.5 gauge32 read-only
This displays the current number of entries in the Multicast Forwarding Database table.
         agentTransferConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.9
             agentTransferUploadGroup 1.3.6.1.4.1.4526.1.7.1.2.9.1
                 agentTransferUploadMode 1.3.6.1.4.1.4526.1.7.1.2.9.1.1 integer read-write
Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. Enumeration: 'xmodem': 2, 'tftp': 1, 'zmodem': 4, 'ymodem': 3.
                 agentTransferUploadServerIP 1.3.6.1.4.1.4526.1.7.1.2.9.1.2 ipaddress read-write
Transfer upload tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
                 agentTransferUploadPath 1.3.6.1.4.1.4526.1.7.1.2.9.1.3 displaystring read-write
Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.
                 agentTransferUploadFilename 1.3.6.1.4.1.4526.1.7.1.2.9.1.4 displaystring read-write
Transfer upload tftpfilename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
                 agentTransferUploadDataType 1.3.6.1.4.1.4526.1.7.1.2.9.1.5 integer read-write
Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log Enumeration: 'errorlog': 3, 'config': 2, 'traplog': 5, 'messagelog': 4.
                 agentTransferUploadStart 1.3.6.1.4.1.4526.1.7.1.2.9.1.6 integer read-write
Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP. Enumeration: 'enable': 1, 'disable': 2.
                 agentTransferUploadStatus 1.3.6.1.4.1.4526.1.7.1.2.9.1.7 integer read-only
Indicates the current status of an upload transfer. Enumeration: 'writingToFlash': 7, 'wrongFileType': 4, 'updatingConfig': 5, 'notInitiated': 1, 'errorStarting': 3, 'invalidConfigFile': 6, 'transferStarting': 2, 'checkingCRC': 9, 'transferSuccessful': 12, 'failureWritingToFlash': 8, 'transferFailed': 13, 'failedCRC': 10, 'unknownDirection': 11.
             agentTransferDownloadGroup 1.3.6.1.4.1.4526.1.7.1.2.9.2
                 agentTransferDownloadMode 1.3.6.1.4.1.4526.1.7.1.2.9.2.1 integer read-write
Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. Enumeration: 'xmodem': 2, 'tftp': 1, 'zmodem': 4, 'ymodem': 3.
                 agentTransferDownloadServerIP 1.3.6.1.4.1.4526.1.7.1.2.9.2.2 ipaddress read-write
Transfer download tftpserverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP. The address is 4 integer bytes ranging from 0 to 255.
                 agentTransferDownloadPath 1.3.6.1.4.1.4526.1.7.1.2.9.2.3 displaystring read-write
Transfer download tftppath configures the directory path where the file is located. The switch remembers the last file path used.
                 agentTransferDownloadFilename 1.3.6.1.4.1.4526.1.7.1.2.9.2.4 displaystring read-write
Transfer download tftpfilename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and TFTP Server IP Address are applicable only if the Transfer Mode is TFTP.
                 agentTransferDownloadDataType 1.3.6.1.4.1.4526.1.7.1.2.9.2.5 integer read-write
Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions. Enumeration: 'sslpem-server': 8, 'code': 2, 'sshkey-dsa': 6, 'sslpem-dhweak': 9, 'sslpem-dhstrong': 10, 'sshkey-rsa1': 4, 'sshkey-rsa2': 5, 'sslpem-root': 7, 'config': 3.
                 agentTransferDownloadStart 1.3.6.1.4.1.4526.1.7.1.2.9.2.6 integer read-write
Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP. Enumeration: 'enable': 1, 'disable': 2.
                 agentTransferDownloadStatus 1.3.6.1.4.1.4526.1.7.1.2.9.2.7 integer read-only
Indicates the current status of an download transfer. Enumeration: 'writingToFlash': 7, 'wrongFileType': 4, 'updatingConfig': 5, 'notInitiated': 1, 'errorStarting': 3, 'invalidConfigFile': 6, 'transferStarting': 2, 'checkingCRC': 9, 'transferSuccessful': 12, 'failureWritingToFlash': 8, 'transferFailed': 13, 'failedCRC': 10, 'unknownDirection': 11.
         agentPortMirroringGroup 1.3.6.1.4.1.4526.1.7.1.2.10
               agentMirroredPortIfIndex 1.3.6.1.4.1.4526.1.7.1.2.10.1 integer32 read-write
IfIndex of the mirrored port
               agentProbePortIfIndex 1.3.6.1.4.1.4526.1.7.1.2.10.2 integer32 read-write
IfIndex of the probe port
               agentPortMirroringMode 1.3.6.1.4.1.4526.1.7.1.2.10.3 integer read-write
Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration Enumeration: 'enable': 1, 'disable': 2, 'delete': 3.
         agentDot3adAggPortTable 1.3.6.1.4.1.4526.1.7.1.2.12 no-access
This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
               agentDot3adAggPortEntry 1.3.6.1.4.1.4526.1.7.1.2.12.1 no-access
Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
                   agentDot3adAggPort 1.3.6.1.4.1.4526.1.7.1.2.12.1.1 integer32 read-only
ifIndex of this physical port
                   agentDot3adAggPortLACPMode 1.3.6.1.4.1.4526.1.7.1.2.12.1.2 integer read-write
Enable/disable 802.3ad LACP on this port Enumeration: 'enable': 1, 'disable': 2.
         agentPortConfigTable 1.3.6.1.4.1.4526.1.7.1.2.13 no-access
A table of the switch's physical port config entries
               agentPortConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.13.1 no-access
Switch's physical port config entry
                   agentPortDot1dBasePort 1.3.6.1.4.1.4526.1.7.1.2.13.1.1 integer32 read-only
The port number of this port.
                   agentPortIfIndex 1.3.6.1.4.1.4526.1.7.1.2.13.1.2 integer32 read-only
The switch's Port IfIndex
                   agentPortIanaType 1.3.6.1.4.1.4526.1.7.1.2.13.1.3 ianaiftype read-only
The switch's Port Type
                   agentPortSTPMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.4 integer read-write
The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled. Enumeration: 'dot1d': 1, 'off': 3, 'fast': 2.
                   agentPortSTPState 1.3.6.1.4.1.4526.1.7.1.2.13.1.5 integer read-only
The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled. Enumeration: 'disabled': 5, 'learning': 3, 'forwarding': 4, 'blocking': 1, 'listening': 2.
                   agentPortAdminMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.6 integer read-write
The switch's Port Admin Mode Enumeration: 'enable': 1, 'disable': 2.
                   agentPortPhysicalMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.7 integer read-write
The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports Enumeration: 'half-10': 2, 'full-100': 5, 'full-1000sx': 8, 'full-100fx': 7, 'auto-negotiate': 1, 'half-100fx': 6, 'full-10': 3, 'half-100': 4.
                   agentPortPhysicalStatus 1.3.6.1.4.1.4526.1.7.1.2.13.1.8 integer read-only
The switch's Port Physical Speed Status. This is the current actual speed. Enumeration: 'half-10': 2, 'full-100': 5, 'full-1000sx': 8, 'full-100fx': 7, 'auto-negotiate': 1, 'half-100fx': 6, 'full-10': 3, 'half-100': 4.
                   agentPortLinkTrapMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.9 integer read-write
If enabled, link up and link down traps will be sent for this port. Enumeration: 'enable': 1, 'disable': 2.
                   agentPortClearStats 1.3.6.1.4.1.4526.1.7.1.2.13.1.10 integer read-write
clear stats for this port only Enumeration: 'enable': 1, 'disable': 2.
                   agentPortDefaultType 1.3.6.1.4.1.4526.1.7.1.2.13.1.11 object identifier read-write
This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
                   agentPortType 1.3.6.1.4.1.4526.1.7.1.2.13.1.12 object identifier read-only
This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
                   agentPortAutoNegAdminStatus 1.3.6.1.4.1.4526.1.7.1.2.13.1.13 integer read-write
This object identifies the administration status of auto negotiation for this port. Enumeration: 'enable': 1, 'disable': 2.
                   agentPortDot3FlowControlMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.14 integer read-write
Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. Enumeration: 'enable': 1, 'disable': 2.
                   agentPortDVlanTagMode 1.3.6.1.4.1.4526.1.7.1.2.13.1.15 integer read-write
Controls the Double Vlan Tag mode on this port. Enumeration: 'enable': 1, 'disable': 2.
                   agentPortDVlanTagEthertype 1.3.6.1.4.1.4526.1.7.1.2.13.1.16 integer32 read-write
Configures the Ethertype for the Double Vlan Tag for this port. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100).
                   agentPortDVlanTagCustomerId 1.3.6.1.4.1.4526.1.7.1.2.13.1.17 integer32 read-write
Configures the Customer ID for the Double Vlan Tag for this port.
                   agentPortMaxFrameSizeLimit 1.3.6.1.4.1.4526.1.7.1.2.13.1.18 integer32 read-only
This object identifies the largest value that can be configured for agentPortMaxFrameSize
                   agentPortMaxFrameSize 1.3.6.1.4.1.4526.1.7.1.2.13.1.19 integer32 read-write
This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
         agentProtocolConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.14
               agentProtocolGroupCreate 1.3.6.1.4.1.4526.1.7.1.2.14.1 displaystring read-write
Set to non-empty string to create a Protocol-Based VLAN group.
               agentProtocolGroupTable 1.3.6.1.4.1.4526.1.7.1.2.14.2 no-access
A table of the switch's Protocol-based VLAN entries
                   agentProtocolGroupEntry 1.3.6.1.4.1.4526.1.7.1.2.14.2.1 no-access
Switch's Protocol-based VLAN entry
                       agentProtocolGroupId 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.1 integer32 read-only
Group identifier of the Protocol-based VLAN entry.
                       agentProtocolGroupName 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.2 displaystring read-only
Group name of the Protocol-based VLAN entry.
                       agentProtocolGroupVlanId 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.3 integer32 read-write
VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
                       agentProtocolGroupProtocolIP 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.4 integer read-write
The status of the IP protocol association with the Protocol-based VLAN entry. Enumeration: 'enable': 1, 'disable': 2.
                       agentProtocolGroupProtocolARP 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.5 integer read-write
The status of the ARP protocol association with the Protocol-based VLAN entry. Enumeration: 'enable': 1, 'disable': 2.
                       agentProtocolGroupProtocolIPX 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.6 integer read-write
The status of the IPX protocol association with the Protocol-based VLAN entry. Enumeration: 'enable': 1, 'disable': 2.
                       agentProtocolGroupStatus 1.3.6.1.4.1.4526.1.7.1.2.14.2.1.7 rowstatus read-write
The status of the Protocol-based VLAN entry. active(1) - this entry is active destroy(6) - remove this entry
               agentProtocolGroupPortTable 1.3.6.1.4.1.4526.1.7.1.2.14.3 no-access
A table of the switch's physical port config entries
                   agentProtocolGroupPortEntry 1.3.6.1.4.1.4526.1.7.1.2.14.3.1 no-access
Switch's physical port config entry
                       agentProtocolGroupPortIfIndex 1.3.6.1.4.1.4526.1.7.1.2.14.3.1.1 integer32 read-only
The interface number of this instance.
                       agentProtocolGroupPortStatus 1.3.6.1.4.1.4526.1.7.1.2.14.3.1.2 rowstatus read-only
The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
         agentStpSwitchConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.15
               agentStpConfigDigestKey 1.3.6.1.4.1.4526.1.7.1.2.15.1 octet string read-only
The MST configuration digest key.
               agentStpConfigFormatSelector 1.3.6.1.4.1.4526.1.7.1.2.15.2 unsigned32 read-only
The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard.
               agentStpConfigName 1.3.6.1.4.1.4526.1.7.1.2.15.3 displaystring read-write
The MST configuration name of at most 32 characters.
               agentStpConfigRevision 1.3.6.1.4.1.4526.1.7.1.2.15.4 unsigned32 read-write
The MST configuration revision. The default value is 1.
               agentStpForceVersion 1.3.6.1.4.1.4526.1.7.1.2.15.5 integer read-write
The MST configuration force protocol version. The default version is dot1s. Enumeration: 'dot1w': 2, 'dot1d': 1, 'dot1s': 3.
               agentStpAdminMode 1.3.6.1.4.1.4526.1.7.1.2.15.6 integer read-write
The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled. Enumeration: 'enable': 1, 'disable': 2.
               agentStpPortTable 1.3.6.1.4.1.4526.1.7.1.2.15.7 no-access
STP port table.
                   agentStpPortEntry 1.3.6.1.4.1.4526.1.7.1.2.15.7.1 no-access
STP port entry.
                       agentStpPortState 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.1 integer read-write
The administrative bridge port state. enable(1) - enables the port. disable(2) - disables the port. The default port state is enabled for the first 4095 ports and disabled for any ports beyond. Enumeration: 'enable': 1, 'disable': 2.
                       agentStpPortStatsMstpBpduRx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.2 counter32 read-only
The MSTP BPDUs received on a specific port.
                       agentStpPortStatsMstpBpduTx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.3 counter32 read-only
The MSTP BPDUs sent from a specific port.
                       agentStpPortStatsRstpBpduRx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.4 counter32 read-only
The RSTP BPDUs received on a specific port.
                       agentStpPortStatsRstpBpduTx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.5 counter32 read-only
The RSTP BPDUs sent from a specific port.
                       agentStpPortStatsStpBpduRx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.6 counter32 read-only
The STP BPDUs received on a specific port.
                       agentStpPortStatsStpBpduTx 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.7 counter32 read-only
The STP BPDUs sent from a specific port.
                       agentStpPortUpTime 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.8 timeticks read-only
Time since port was reset. It is displayed in days, hours, minutes, and seconds.
                       agentStpPortMigrationCheck 1.3.6.1.4.1.4526.1.7.1.2.15.7.1.9 integer read-write
Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port. Enumeration: 'true': 1, 'false': 0.
               agentStpCstConfigGroup 1.3.6.1.4.1.4526.1.7.1.2.15.8
                   agentStpCstHelloTime 1.3.6.1.4.1.4526.1.7.1.2.15.8.1 unsigned32 read-only
The MSTP root port hello time for the CIST.
                   agentStpCstMaxAge 1.3.6.1.4.1.4526.1.7.1.2.15.8.2 unsigned32 read-only
The MSTP root port max age for the CIST.
                   agentStpCstRegionalRootId 1.3.6.1.4.1.4526.1.7.1.2.15.8.3 octet string read-only
The MSTP regional root identifier for the CIST.
                   agentStpCstRegionalRootPathCost 1.3.6.1.4.1.4526.1.7.1.2.15.8.4 unsigned32 read-only
The MSTP regional root path cost for the CIST.
                   agentStpCstRootFwdDelay 1.3.6.1.4.1.4526.1.7.1.2.15.8.5 unsigned32 read-only
The MSTP root port forward delay for the CIST.
                   agentStpCstBridgeFwdDelay 1.3.6.1.4.1.4526.1.7.1.2.15.8.6 unsigned32 read-write
The MSTP bridge forward delay for the CIST. The default value is 15.
                   agentStpCstBridgeHelloTime 1.3.6.1.4.1.4526.1.7.1.2.15.8.7 unsigned32 read-write
The MSTP bridge hello time for the CIST. The default value is 2.
                   agentStpCstBridgeHoldTime 1.3.6.1.4.1.4526.1.7.1.2.15.8.8 unsigned32 read-only
The MSTP bridge hold time for the CIST.
                   agentStpCstBridgeMaxAge 1.3.6.1.4.1.4526.1.7.1.2.15.8.9 unsigned32 read-write
The MSTP bridge max age for the CIST. The default value is 20.
               agentStpCstPortTable 1.3.6.1.4.1.4526.1.7.1.2.15.9 no-access
CIST port table.
                   agentStpCstPortEntry 1.3.6.1.4.1.4526.1.7.1.2.15.9.1 no-access
CIST port entry.
                       agentStpCstPortOperEdge 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.1 integer read-only
The MSTP operational status of a specific port for the CIST. Enumeration: 'enable': 1, 'disable': 2.
                       agentStpCstPortOperPointToPoint 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.2 integer read-only
The MSTP operational point to point mac of a specific port for the CIST. Enumeration: 'false': 2, 'true': 1.
                       agentStpCstPortTopologyChangeAck 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.3 integer read-only
The MSTP topology change acknowledge for a specific port in the CIST. Enumeration: 'false': 2, 'true': 1.
                       agentStpCstPortEdge 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.4 integer read-write
The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. Enumeration: 'enable': 1, 'disable': 2.
                       agentStpCstPortForwardingState 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.5 integer read-only
The MSTP forwarding state of a specific port in CIST. Enumeration: 'manualFwd': 5, 'notParticipate': 6, 'discarding': 1, 'disabled': 4, 'learning': 2, 'forwarding': 3.
                       agentStpCstPortId 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.6 octet string read-only
The MSTP port identifier of a specific port in CIST.
                       agentStpCstPortPathCost 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.7 unsigned32 read-write
The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
                       agentStpCstPortPriority 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.8 unsigned32 read-write
The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
                       agentStpCstDesignatedBridgeId 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.9 octet string read-only
The MSTP designated bridge ID of a specific port in CIST.
                       agentStpCstDesignatedCost 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.10 unsigned32 read-only
The MSTP designated cost of a specific port in CIST.
                       agentStpCstDesignatedPortId 1.3.6.1.4.1.4526.1.7.1.2.15.9.1.11 octet string read-only
The MSTP designated port ID of a specific port in CIST.
               agentStpMstTable 1.3.6.1.4.1.4526.1.7.1.2.15.10 no-access
MST table.
                     agentStpMstEntry 1.3.6.1.4.1.4526.1.7.1.2.15.10.1 no-access
MST entry.
                         agentStpMstId 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.1 unsigned32 read-only
The MSTP instance ID.
                         agentStpMstBridgePriority 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.2 unsigned32 read-write
The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.
                         agentStpMstBridgeIdentifier 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.3 octet string read-only
The MSTP bridge identifier in a specific instance.
                         agentStpMstDesignatedRootId 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.4 octet string read-only
The MSTP designated root bridge identifier in a specific instance.
                         agentStpMstRootPathCost 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.5 unsigned32 read-only
The MSTP root path cost in a specific instance.
                         agentStpMstRootPortId 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.6 octet string read-only
The MSTP root port ID in a specific instance.
                         agentStpMstTimeSinceTopologyChange 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.7 timeticks read-only
The MSTP time since the last topology change in a specific instance.
                         agentStpMstTopologyChangeCount 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.8 counter32 read-only
The MSTP count of topology changes in a specific instance.
                         agentStpMstTopologyChangeParm 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.9 integer read-only
The MSTP topology change parameter in a specific instance. Enumeration: 'false': 2, 'true': 1.
                         agentStpMstRowStatus 1.3.6.1.4.1.4526.1.7.1.2.15.10.1.10 rowstatus read-only
The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
               agentStpMstPortTable 1.3.6.1.4.1.4526.1.7.1.2.15.11 no-access
MST port table.
                     agentStpMstPortEntry 1.3.6.1.4.1.4526.1.7.1.2.15.11.1 no-access
MST port entry.
                         agentStpMstPortForwardingState 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.1 integer read-only
The MSTP forwarding state of a specific port in a specific instance. Enumeration: 'manualFwd': 5, 'notParticipate': 6, 'discarding': 1, 'disabled': 4, 'learning': 2, 'forwarding': 3.
                         agentStpMstPortId 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.2 octet string read-only
The MSTP port identifier of a specific port in a specific instance.
                         agentStpMstPortPathCost 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.3 unsigned32 read-write
The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
                         agentStpMstPortPriority 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.4 unsigned32 read-write
The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.
                         agentStpMstDesignatedBridgeId 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.5 octet string read-only
The MSTP designated bridge ID of a specific port in a specific instance.
                         agentStpMstDesignatedCost 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.6 unsigned32 read-only
The MSTP designated cost of a specific port in a specific instance.
                         agentStpMstDesignatedPortId 1.3.6.1.4.1.4526.1.7.1.2.15.11.1.7 octet string read-only
The MSTP designated port ID of a specific port in a specific instance.
               agentStpMstVlanTable 1.3.6.1.4.1.4526.1.7.1.2.15.12 no-access
MST VLAN table.
                     agentStpMstVlanEntry 1.3.6.1.4.1.4526.1.7.1.2.15.12.1 no-access
MST VLAN entry.
                         agentStpMstVlanRowStatus 1.3.6.1.4.1.4526.1.7.1.2.15.12.1.1 rowstatus read-only
The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
         agentAuthenticationGroup 1.3.6.1.4.1.4526.1.7.1.2.16
               agentAuthenticationListCreate 1.3.6.1.4.1.4526.1.7.1.2.16.1 displaystring read-write
Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
               agentAuthenticationListTable 1.3.6.1.4.1.4526.1.7.1.2.16.2 no-access
MST VLAN table.
                   agentAuthenticationListEntry 1.3.6.1.4.1.4526.1.7.1.2.16.2.1 no-access
MST VLAN entry.
                       agentAuthenticationListIndex 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.1 unsigned32 no-access
Authenticaiton List Index Unique number used for indexing into this table.
                       agentAuthenticationListName 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.2 displaystring read-only
Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
                       agentAuthenticationListMethod1 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.3 integer read-write
Authenticion List Method 1 Configures the first authentication method to use when this list is specified. Enumeration: 'radius': 2, 'local': 1, 'reject': 3.
                       agentAuthenticationListMethod2 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.4 integer read-write
Authenticion List Method 2 Configures the second authentication method to use when this list is specified. Enumeration: 'radius': 3, 'local': 2, 'undefined': 1, 'reject': 4.
                       agentAuthenticationListMethod3 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.5 integer read-write
Authenticion List Method 3 Configures the third authentication method to use when this list is specified. Enumeration: 'radius': 3, 'local': 2, 'undefined': 1, 'reject': 4.
                       agentAuthenticationListStatus 1.3.6.1.4.1.4526.1.7.1.2.16.2.1.6 rowstatus read-write
The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
               agentUserConfigDefaultAuthenticationList 1.3.6.1.4.1.4526.1.7.1.2.16.3 displaystring read-write
Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting.
               agentUserAuthenticationConfigTable 1.3.6.1.4.1.4526.1.7.1.2.16.4 no-access
User Authentication Config Table
                   agentUserAuthenticationConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.16.4.1 no-access
User Authentication Config Entry
                       agentUserAuthenticationList 1.3.6.1.4.1.4526.1.7.1.2.16.4.1.1 displaystring read-write
User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
               agentUserPortConfigTable 1.3.6.1.4.1.4526.1.7.1.2.16.5 no-access
User Port Config Table
                   agentUserPortConfigEntry 1.3.6.1.4.1.4526.1.7.1.2.16.5.1 no-access
User Port Config Entry
                       agentUserPortSecurity 1.3.6.1.4.1.4526.1.7.1.2.16.5.1.1 agentportmask read-write
User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.
         agentClassOfServiceGroup 1.3.6.1.4.1.4526.1.7.1.2.17
               agentClassOfServiceTable 1.3.6.1.4.1.4526.1.7.1.2.17.1 no-access
A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
                   agentClassOfServiceEntry 1.3.6.1.4.1.4526.1.7.1.2.17.1.1 no-access
A 802.1p priority mapped to a traffic class priority queue.
                       agentClassOfServicePriority 1.3.6.1.4.1.4526.1.7.1.2.17.1.1.1 integer32 no-access
The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
                       agentClassOfServiceClass 1.3.6.1.4.1.4526.1.7.1.2.17.1.1.2 integer32 read-write
Traffic class priority queue the received frame is mapped to.
     agentSystemGroup 1.3.6.1.4.1.4526.1.7.1.3
         agentSaveConfig 1.3.6.1.4.1.4526.1.7.1.3.1 integer read-write
Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset agentSaveConfigStatus back to notInitiated state. Enumeration: 'enable': 1, 'disable': 2.
         agentClearConfig 1.3.6.1.4.1.4526.1.7.1.3.2 integer read-write
clear config to factory defaults Enumeration: 'enable': 1, 'disable': 2.
         agentClearLags 1.3.6.1.4.1.4526.1.7.1.3.3 integer read-write
clear lag configuration Enumeration: 'enable': 1, 'disable': 2.
         agentClearLoginSessions 1.3.6.1.4.1.4526.1.7.1.3.4 integer read-write
close all telnet sessions Enumeration: 'enable': 1, 'disable': 2.
         agentClearPasswords 1.3.6.1.4.1.4526.1.7.1.3.5 integer read-write
reset passwords Enumeration: 'enable': 1, 'disable': 2.
         agentClearPortStats 1.3.6.1.4.1.4526.1.7.1.3.6 integer read-write
clear all port statistics Enumeration: 'enable': 1, 'disable': 2.
         agentClearSwitchStats 1.3.6.1.4.1.4526.1.7.1.3.7 integer read-write
clear all switch statistics Enumeration: 'enable': 1, 'disable': 2.
         agentClearTrapLog 1.3.6.1.4.1.4526.1.7.1.3.8 integer read-write
clear trap log Enumeration: 'enable': 1, 'disable': 2.
         agentClearVlan 1.3.6.1.4.1.4526.1.7.1.3.9 integer read-write
clear vlan entries Enumeration: 'enable': 1, 'disable': 2.
         agentResetSystem 1.3.6.1.4.1.4526.1.7.1.3.10 integer read-write
reset the switch Enumeration: 'enable': 1, 'disable': 2.
         agentSaveConfigStatus 1.3.6.1.4.1.4526.1.7.1.3.11 integer read-only
Indicates the current status of an save configuration request. Enumeration: 'savingComplete': 3, 'savingInProcess': 2, 'notInitiated': 1.
     agentCableTesterGroup 1.3.6.1.4.1.4526.1.7.1.4
         agentCableTesterStatus 1.3.6.1.4.1.4526.1.7.1.4.1 integer read-write
Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set. Enumeration: 'active': 1, 'failure': 3, 'success': 2, 'uninitialized': 4.
         agentCableTesterIfIndex 1.3.6.1.4.1.4526.1.7.1.4.2 unsigned32 read-write
Determines on which port to perform the cable test. Limited to copper based ports.
         agentCableTesterCableStatus 1.3.6.1.4.1.4526.1.7.1.4.3 integer read-only
Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress. Enumeration: 'unknown': 4, 'short': 3, 'open': 2, 'normal': 1.
         agentCableTesterMinimumCableLength 1.3.6.1.4.1.4526.1.7.1.4.4 unsigned32 read-only
The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
         agentCableTesterMaximumCableLength 1.3.6.1.4.1.4526.1.7.1.4.5 unsigned32 read-only
The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
         agentCableTesterCableFailureLocation 1.3.6.1.4.1.4526.1.7.1.4.6 unsigned32 read-only
The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2).
     gsm7324SwitchingTraps 1.3.6.1.4.1.4526.1.7.1.50
           multipleUsersTrap 1.3.6.1.4.1.4526.1.7.1.50.1
trapMgrMultipleUsersLogTrap.
           broadcastStormStartTrap 1.3.6.1.4.1.4526.1.7.1.50.2
trapMgrBCastStormStartLogTrap.
           broadcastStormEndTrap 1.3.6.1.4.1.4526.1.7.1.50.3
trapMgrBCastStormEndLogTrap.
           linkFailureTrap 1.3.6.1.4.1.4526.1.7.1.50.4
trapMgrLinkFailureLogTrap.
           vlanRequestFailureTrap 1.3.6.1.4.1.4526.1.7.1.50.5
trapMgrVlanRequestFailureLogTrap
           vlanDeleteLastTrap 1.3.6.1.4.1.4526.1.7.1.50.6
trapMgrLastVlanDeleteLastLogTrap
           vlanDefaultCfgFailureTrap 1.3.6.1.4.1.4526.1.7.1.50.7
trapMgrDefaultVlanCfgFailureLogTrap
           vlanRestoreFailureTrap 1.3.6.1.4.1.4526.1.7.1.50.8
trapMgrVlanRestoreFailureLogTrap
           fanFailureTrap 1.3.6.1.4.1.4526.1.7.1.50.9
trapMgrFanFailureLogTrap.
           stpInstanceNewRootTrap 1.3.6.1.4.1.4526.1.7.1.50.10
trapMgrStpInstanceNewRootTrap
           stpInstanceTopologyChangeTrap 1.3.6.1.4.1.4526.1.7.1.50.11
trapMgrStpInstanceTopologyChange
           powerSupplyStatusChangeTrap 1.3.6.1.4.1.4526.1.7.1.50.12
powerSupplyStatusChangeTrap