GBOND-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: GBOND-ATM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, GBOND-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gBondAtmMIB 1.3.6.1.2.1.211.1
The objects in this MIB module are used to manage the multi-pair bonded xDSL Interfaces using ATM inverse multiplexing, defined in ITU-T recommendation G.998.1 (G.Bond/ATM). This MIB module MUST be used in conjunction with GBOND-MIB module, common to all G.Bond technologies. The following references are used throughout this MIB module: [WT-159] refers to: DSL Forum Technical Report: 'Management Framework for xDSL Bonding', January 2007. Naming Conventions: BCE - Bonding Channel Entity CO - Central Office CPE - Customer Premises Equipment GBS - Generic Bonding Sublayer SNR - Signal to Noise Ratio Copyright (C) The Internet Society (2007). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
     gBondAtmObjects 1.3.6.1.2.1.211.1.1
         gBondAtmPort 1.3.6.1.2.1.211.1.1.1
             gBondAtmPortConfTable 1.3.6.1.2.1.211.1.1.1.1 no-access
Table for Configuration of G.Bond ATM ports. Entries in this table MUST be maintained in a persistent manner
                 gBondAtmPortConfEntry 1.3.6.1.2.1.211.1.1.1.1.1 no-access
An entry in the G.Bond ATM Port Configuration table. Each entry represents an G.Bond ATM port indexed by the ifIndex. Additional configuration parameters are available via the gBondPortConfEntry of GBOND-MIB. Note that an G.Bond ATM port runs on top of a single or multiple BCE port(s), which are also indexed by ifIndex.
                     gBondAtmUpMaxDataRate 1.3.6.1.2.1.211.1.1.1.1.1.1 unsigned32 read-write
The maximum net upstream data rate a bonding group is allowed to achieve to carry an ATM stream.If set to '9999999', this parameter is ignored.
                     gBondAtmDownMaxDataRate 1.3.6.1.2.1.211.1.1.1.1.1.2 unsigned32 read-write
The maximum net downstream data rate a bonding group is allowed to achieve to carry an ATM stream.If set to '9999999', this parameter is ignored.
                     gBondAtmUpDiffDelayTolerence 1.3.6.1.2.1.211.1.1.1.1.1.3 unsigned32 read-write
The maximum upstream differential delay among member links in a bonding group.
                     gBondAtmDownDiffDelayTolerence 1.3.6.1.2.1.211.1.1.1.1.1.4 unsigned32 read-write
The maximum downstream differential delay among member links in a bonding group.
             gBondAtmPortStatusTable 1.3.6.1.2.1.211.1.1.1.2 no-access
This table provides overall status information of G.Bond ATM ports, complementing the generic status information from the ifTable of IF-MIB and gBondFltStatus of GBOND-MIB. Additional status information about connected BCEs is available from the relevant line MIBs This table contains live data from the equipment. As such, it is NOT persistent.
                 gBondAtmPortStatusEntry 1.3.6.1.2.1.211.1.1.1.2.1 no-access
An entry in the G.Bond ATM port Status table. Each entry represents a G.Bond ATM port indexed by the ifIndex. Note that an G.Bond GBS port runs on top of a single or multiple BCE port(s), which are also indexed by ifIndex.
                     gBondAtmShowTime 1.3.6.1.2.1.211.1.1.1.2.1.1 timeticks read-only
The accumulated time when a bonding group is in normal operation.
                     gBondAtmUpRxCellLossCount 1.3.6.1.2.1.211.1.1.1.2.1.2 counter32 read-only
The total number of cells that are lost at aggregation output in the upstream direction from a bonding group for the accumulation interval.
                     gBondAtmDownRxCellLossCount 1.3.6.1.2.1.211.1.1.1.2.1.3 counter32 read-only
The total number of cells that are lost at aggregation output in the downstream direction from a bonding group for the accumulation interval.
     gBondAtmConformance 1.3.6.1.2.1.211.1.2
         gBondAtmGroups 1.3.6.1.2.1.211.1.2.1
             gBondAtmBasicGroup 1.3.6.1.2.1.211.1.2.1.1
A collection of objects representing management information for G.Bond ATM ports.
         gBondAtmCompliances 1.3.6.1.2.1.211.1.2.2
             gBondAtmCompliance 1.3.6.1.2.1.211.1.2.2.1
The compliance statement for G.Bond ATM interfaces. Compliance with the following external compliance statements is REQUIRED: MIB Module Compliance Statement ---------- -------------------- IF-MIB ifCompliance3 GBOND-MIB gBondCompliance