GBNPlatformOAM-MIB: View SNMP OID List / Download MIB

VENDOR: GCOM TECHNOLOGIES CO.,LTD.


 Home MIB: GBNPlatformOAM-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, GREENTECH-MASTER-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gbnPlatformOAM 1.3.6.1.4.1.13464.1.2.1.1
Gbn Common Enterprise MIB definition.
     gbnPlatformOAMSysIf 1.3.6.1.4.1.13464.1.2.1.1.1
         sysIfMACAddr 1.3.6.1.4.1.13464.1.2.1.1.1.1 macaddress read-write
DURABLE: { '000000000000'H } The base (i.e., first) MAC address used by the gbn agent for its in-band ports.
         sysIfIpAddress 1.3.6.1.4.1.13464.1.2.1.1.1.2 ipaddress read-write
DURABLE: { '00000000'H } The IP Address for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
         sysIfIPGateAddress 1.3.6.1.4.1.13464.1.2.1.1.1.3 ipaddress read-write
DURABLE: { '00000000'H } The default Gateway Address (i.e., next hop router) for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
         sysIfIPNetMask 1.3.6.1.4.1.13464.1.2.1.1.1.4 ipaddress read-write
DURABLE: { 'ffffff00'H } The IP NetMask for sw0 (swEND 0); only applies after reset - see 'gbnCommonMiscReset'.
         sysIfIPStatus 1.3.6.1.4.1.13464.1.2.1.1.1.5 integer read-write
This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the gbnCommonIP MIB objects. This allows the user to change gbnCommonIPMACAddr, gbnCommonIPIpAddress, gbnCommonIPGateAddress, and gbnCommonIPNetMask, and then apply the changes to the unit using apply(4). If gbnCommonIPStatus returns notModified(1), no modifications were made to any gbnCommonIP MIB objects. If gbnCommonIPStatus returns modified(2), one or more objects were changed, but have not been applied. Both notModified(1) and modified(2) are read-only values; the agent returns a SNMP_BADVALUE for sets using these values. Both restore(3) and apply(4) are valid SET values. If one or more of the gbnCommonIP objects were modified, the user can restore the parameters to a mirror of the NVM values using restore(3). Enumeration: 'notModified': 1, 'apply': 4, 'modified': 2, 'restore': 3.
         sysIfBOOTPOnOff 1.3.6.1.4.1.13464.1.2.1.1.1.7 integer read-write
DURABLE: { disable } Enable/Disable BOOTP operation for the gbn agent. When 'disable(2)', no BOOTPs are transmitted by the Application. When 'enable(1)', the Application sends BOOTP requests during system startup. Enumeration: 'enable': 1, 'disable': 2.
         sysIfDHCPOnOff 1.3.6.1.4.1.13464.1.2.1.1.1.8 integer read-write
DURABLE: { disable } Enable/Disable DHCP operation for the gbn agent. When 'disable(2)', no DHCPs are transmitted by the Application. When enabled, the Application sends DHCP requests during system startup. Enumeration: 'enable': 1, 'disable': 2.
         sysIfManageVLANTbale 1.3.6.1.4.1.13464.1.2.1.1.1.9 no-access
ManageVlan table
             sysIfManageVLANEntry 1.3.6.1.4.1.13464.1.2.1.1.1.9.1 no-access
ManageVlan entry
                 sysIfManageVLANVid 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.1 integer read-only
ManageVLAN-ID, as an index, the maximum number is 26.
                 sysIfManageVLANRowStatus 1.3.6.1.4.1.13464.1.2.1.1.1.9.1.2 rowstatus read-write
ManageVLAN status
     gbnPlatformOAMSystem 1.3.6.1.4.1.13464.1.2.1.1.2
         softwarePlate 1.3.6.1.4.1.13464.1.2.1.1.2.1 displaystring read-only
Software platform used by switches.
         softwareVersion 1.3.6.1.4.1.13464.1.2.1.1.2.2 displaystring read-only
Software version, the format is V100R001B02D06P03SP3
         softwareCompiledTimeE 1.3.6.1.4.1.13464.1.2.1.1.2.3 displaystring read-only
Software Compiled time displayed in English, the format is Feburary 17 2003 15:47:00
         softwareCompiledTimeC 1.3.6.1.4.1.13464.1.2.1.1.2.4 displaystring read-only
Software Compiled time
         cpuDescription 1.3.6.1.4.1.13464.1.2.1.1.2.5 displaystring read-only
System CPU description, the format is Mips 32334, 133MHz
         sdramDescription 1.3.6.1.4.1.13464.1.2.1.1.2.6 displaystring read-only
System Memory description, the format is 32M
         flashDescription 1.3.6.1.4.1.13464.1.2.1.1.2.7 displaystring read-only
System Flash description, the format is 4096k
         hardwareVersion 1.3.6.1.4.1.13464.1.2.1.1.2.8 displaystring read-only
Hardware version, the format is V3.0
         bootromVersion 1.3.6.1.4.1.13464.1.2.1.1.2.9 displaystring read-only
Bootrom version, the format is V2.0
         hostName 1.3.6.1.4.1.13464.1.2.1.1.2.10 displaystring read-write
System host name
         cpuIdle 1.3.6.1.4.1.13464.1.2.1.1.2.11 integer read-only
The percentage of free CPU in the current system.
         memorySize 1.3.6.1.4.1.13464.1.2.1.1.2.12 integer32 read-only
The current system memory size, unit is byte.
         memoryIdle 1.3.6.1.4.1.13464.1.2.1.1.2.13 integer32 read-only
The current system free memory size, unit is byte.
         systemClock 1.3.6.1.4.1.13464.1.2.1.1.2.14
               clockTime 1.3.6.1.4.1.13464.1.2.1.1.2.14.1 unsigned32 read-write
The current calendar time in seconds. The based time is 1979/1/1. Year of the date must be the number between 2000 and 2099
               timeZoneName 1.3.6.1.4.1.13464.1.2.1.1.2.14.2 displaystring read-write
the timezone name,1-32 letters.
               timeZoneOffset 1.3.6.1.4.1.13464.1.2.1.1.2.14.3 integer32 read-write
seconds between current timezone and GMT
               offsetNegFlag 1.3.6.1.4.1.13464.1.2.1.1.2.14.4 truthvalue read-write
earlier or latter than GMT,it is true when timeZoneOffset is negative
         productName 1.3.6.1.4.1.13464.1.2.1.1.2.15 displaystring read-write
DURABLE: { 'WindRiver gbn Agent' } The product name associated with this agent. This name is displayed on the console screens and Web pages.
         systemReset 1.3.6.1.4.1.13464.1.2.1.1.2.16 integer read-write
Physically performs a hardware reset of the unit. Use with care. A 'reset(2)' resets the unit, a 'resetToDefaults(3)' resets the NVM configuration to factory defaults and then resets the unit, and 'noop(1)' does nothing. A value of 'noop(1)' is always returned for a GET operation. Enumeration: 'reset': 2, 'resetToDefaults': 3, 'noop': 1.
         writeConfig 1.3.6.1.4.1.13464.1.2.1.1.2.17 integer read-write
When set to 'save(2)', config file is saved to NVM (Nonvolatile Memory). NVM save operations may be slow (e.g., erasing/writing Flash device). Consequently, all or many updates should be made before saving to NVM. Note that the SNMP set to 'save(2)' returns immediately to the caller. Gets on this object then return 'saveInProgress(3)' until the save operation completes, at which time 'noop(1)' is returned if the save operation is succeeded, otherwise 'saveFailed(4)' is returned. Consequently, a get operation always returns 'noop(1)', 'saveInProgress(3)' or 'saveFailed(4) depending on the current state and the result of the save operation. The agent returns 'badValue' for SNMPv1 or 'inconsistentValue' for SNMPv2c/v3 for a set to 'Save(2)' while the current get state is 'saveInProgress(3)'. Attempts to set this object to 'saveInProgress(3)' or 'saveFailed(4)' returns 'badValue' for SNMPv1 or 'wrongValue' for SNMPv2c/v3. Enumeration: 'save': 2, 'noop': 1, 'saveInProgress': 3, 'saveFailed': 4.
         saveNMInterfaceConfig 1.3.6.1.4.1.13464.1.2.1.1.2.18
               nmInterfaceId 1.3.6.1.4.1.13464.1.2.1.1.2.18.1 integer read-write
interface id of vlan saved for nm_interface configuration.
               nmInterfaceIpAddress 1.3.6.1.4.1.13464.1.2.1.1.2.18.2 ipaddress read-write
ip address saved for nm_interface configuration.
               nmInterfaceNetMask 1.3.6.1.4.1.13464.1.2.1.1.2.18.3 ipaddress read-write
mask saved for nm_interface configuration.
               nmInterfaceGateAddress 1.3.6.1.4.1.13464.1.2.1.1.2.18.4 ipaddress read-write
gateway address saved for nm_interface configuration.
               writeNMInterfaceConifig 1.3.6.1.4.1.13464.1.2.1.1.2.18.5 integer read-write
We save the nm_interface configuration through setting this Mib. When setting to 'saveNmconfig(1)', nm_interface configuration is starting to be saved. At the same time the value of writeNMInterfaceConifigStatus Mib is set to 'saveInProgress(2)'. Then the value of nmInterfaceId, nmInterfaceIpAddress, nmInterfaceNetMask, nmInterfaceGateAddress will be read one by one.According to these value, the nm_interface configuration is to be saved. Untill the process was over the value of writeNMInterfaceConifigStatus Mib is changed to 'saveSuccess(1)'. And if the process was ended for exception the value of writeNMInterfaceConifigStatus Mib is set to a error code from 'saveFailed(3)' to 'invalidIpOrMask(11)'. Enumeration: 'saveNmconfig': 1.
               writeNMInterfaceConifigStatus 1.3.6.1.4.1.13464.1.2.1.1.2.18.6 integer read-only
Reserve the status of process in saving Nmconfig. Enumeration: 'noIpAddress': 5, 'differentSubnet': 6, 'noInterfaceParameter': 7, 'noMaskParameter': 9, 'saveInProgress': 2, 'noGatewayParameter': 10, 'noInterface': 4, 'saveSuccess': 1, 'invalidIpOrMask': 11, 'noIpAddressParameter': 8, 'saveFailed': 3.
         prodSerialNo 1.3.6.1.4.1.13464.1.2.1.1.2.19 displaystring read-only
Product Serial Number
         cpuBusyStatus 1.3.6.1.4.1.13464.1.2.1.1.2.20 truthvalue read-only
CPU busy status
         cpuBusyAlarmEnable 1.3.6.1.4.1.13464.1.2.1.1.2.21 truthvalue read-write
the enable status of cpu busy alarm. Enumeration: 'false': 2, 'true': 1.
         cpuBusyThreshold 1.3.6.1.4.1.13464.1.2.1.1.2.22 integer read-write
CPU busy threshold.
         cpuUnbusyThreshold 1.3.6.1.4.1.13464.1.2.1.1.2.23 integer32 read-write
CPU unbusy threshold.
         cpuStatusTrap 1.3.6.1.4.1.13464.1.2.1.1.2.24
               cpuBusyTrap 1.3.6.1.4.1.13464.1.2.1.1.2.24.1
cpu busy trap.
               cpuUnbusyTrap 1.3.6.1.4.1.13464.1.2.1.1.2.24.2
cpu unbusy trap.
     gbnPlatformOAMIpAccessControl 1.3.6.1.4.1.13464.1.2.1.1.3
         ipAccessControlTable 1.3.6.1.4.1.13464.1.2.1.1.3.1 no-access
IP address access control table.
             ipAccessControlEntry 1.3.6.1.4.1.13464.1.2.1.1.3.1.1 no-access
IP address access control entry.
                 controlIpAddress 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.1 ipaddress read-only
The accessible ip address of the switch
                 controlIpMask 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.2 ipaddress read-only
The accessible ip address mask of the switch, wildcard supports mask and unmask
                 controlTeminal 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.3 integer read-only
The client type connected to switch, snmp(1) means connecting switch by SNMP, web(2) means connecting switch by WEB, telnet(3) means connecting switch by telnet. Enumeration: 'web': 2, 'snmp': 1, 'telnet': 3.
                 controlStatus 1.3.6.1.4.1.13464.1.2.1.1.3.1.1.4 integer read-write
IP address control status, active(1) means adding the ip address to list, destroy(2) means deleting the ip address from list Enumeration: 'active': 1, 'destroy': 2.
     gbnPlatformOAMWatchDog 1.3.6.1.4.1.13464.1.2.1.1.4
         softDogProxy 1.3.6.1.4.1.13464.1.2.1.1.4.1 integer read-write
Enable/disable the soft dog. Enumeration: 'enable': 1, 'disable': 2.
     gbnPlatformOAMMuser 1.3.6.1.4.1.13464.1.2.1.1.5
         musrTable 1.3.6.1.4.1.13464.1.2.1.1.5.1 no-access
A Table of usr_name and Password.
             musrEntry 1.3.6.1.4.1.13464.1.2.1.1.5.1.1 no-access
A list of usr parameters.
                 musrIndex 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.1 integer32 no-access
A simple index into 'gbnCommonUsrTable'.
                 musrName 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.2 displaystring read-write
A simple usrname of gbnCommonUsrEntry.
                 musrPassword 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.3 displaystring read-write
A simple password of gbnCommonUsrEntry.
                 musrType 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.4 integer read-write
DURABLE: { NormalUser } A simple UsrType into 'gbnCommonUsrTable'. when 'NomalUser' configuration is limitted Enumeration: 'superUser': 1, 'normalUser': 0.
                 musrRowStatus 1.3.6.1.4.1.13464.1.2.1.1.5.1.1.5 integer read-write
DURABLE: { disable } A simple RowStatus into 'gbnCommonUsrTable'. when 'disable' the user is deleted Enumeration: 'enable': 1, 'disable': 2.
         manageUserAuthenType 1.3.6.1.4.1.13464.1.2.1.1.5.2 integer read-write
Authentication method 1:local, 2:radius, 3:radius first and then local after failed,4:tacacsplus,5:tacacsplus first, and then local after failed. Enumeration: 'locacl': 1, 'radiusFailLocal': 3, 'tacacsplusFailLocal': 5, 'radius': 2, 'tacacsplus': 4.
         manageUserAuthenRadiusName 1.3.6.1.4.1.13464.1.2.1.1.5.3 displaystring read-write
radius server name.
         manageUserAuthChallegeType 1.3.6.1.4.1.13464.1.2.1.1.5.4 integer read-write
Radius authentication method1:CHAP, 2:PAP. Enumeration: 'pap': 2, 'chap': 1.
         manageUserTacacsAuthor 1.3.6.1.4.1.13464.1.2.1.1.5.5 truthvalue read-write
authorization afer authenticastion.
         manageUserTacacsAccount 1.3.6.1.4.1.13464.1.2.1.1.5.6 truthvalue read-write
accounting after authorization.
     gbnPlatformOAMUpDownLoad 1.3.6.1.4.1.13464.1.2.1.1.6
         loadTftpAddress 1.3.6.1.4.1.13464.1.2.1.1.6.1 ipaddress read-write
DURABLE: The IP Address for the TFTP server used for downloading and/or uploading files.
         loadTftpFileName 1.3.6.1.4.1.13464.1.2.1.1.6.2 displaystring read-write
DURABLE: The TFTP file path and name.
         loadType 1.3.6.1.4.1.13464.1.2.1.1.6.3 integer read-write
DURABLE: { application } The type of file to download or upload upon an 'gbnCommonLoadExecute'. application:program file of the switch configuration:configuration file,should be uploaded before you download it. miccode:microcode is the program file of vdsl chip. removed during the boot Flash write operation, the agent cannot be recovered). Enumeration: 'syslog': 6, 'alarm': 5, 'application': 1, 'wholeBootRom': 7, 'bootCode': 4, 'normalBootRom': 2, 'configuration': 3.
         loadExecute 1.3.6.1.4.1.13464.1.2.1.1.6.4 integer read-write
Execute file download or upload procedure. A SET of this object starts the load procedure. Note that the Application and Boot images can only be downloaded. The NVM Configuration file can be uploaded and downloaded. A GET of this object will return the status of the executed operation. Use 'gbnCommonLoadExecuteStatus' to determine the status of the executed load. Enumeration: 'downloadTftp': 2, 'uploadTftp': 3, 'downloadXmodem': 6, 'noop': 1, 'downloadFtp': 4, 'uploadFtp': 5.
         loadExecuteStatus 1.3.6.1.4.1.13464.1.2.1.1.6.5 integer read-only
Provides status on the execute file load progress. Enumeration: 'inProgressTftp': 2, 'errorFilenameFtp': 10, 'successFtp': 8, 'errorFilenameTftp': 5, 'notStarted': 1, 'errorConnectionFtp': 9, 'errorConnectionTftp': 4, 'successTftp': 3, 'errorFaultFtp': 11, 'successXmodem': 13, 'errorConnectionXmodem': 14, 'errorFilenameXmodem': 15, 'inProgressXmodem': 12, 'errorFaultXmodem': 16, 'errorFaultTftp': 6, 'inProgressFtp': 7.
         loadFtpAddress 1.3.6.1.4.1.13464.1.2.1.1.6.6 ipaddress read-write
DURABLE: The IP Address for the FTP server used for downloading and/or uploading files.
         loadFtpFileName 1.3.6.1.4.1.13464.1.2.1.1.6.7 displaystring read-write
DURABLE: The FTP file path and name.
         loadFtpUserName 1.3.6.1.4.1.13464.1.2.1.1.6.8 displaystring read-write
DURABLE: The FTP user name.
         loadFtpUserPassword 1.3.6.1.4.1.13464.1.2.1.1.6.9 displaystring read-write
DURABLE: The FTP user password.
     gbnPlatformOAMSnmp 1.3.6.1.4.1.13464.1.2.1.1.7
         snmpCommunityToViewTable 1.3.6.1.4.1.13464.1.2.1.1.7.1 no-access
A table of SNMPv1/v2c community string to view name mappings.
             snmpCommunityToViewEntry 1.3.6.1.4.1.13464.1.2.1.1.7.1.1 no-access
A list of community-to-view parameters.
                 snmpComm2ViewIndex 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.1 integer32 no-access
A simple index into 'gbnCommonCommunityToViewTable'.
                 snmpComm2ViewCommName 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.2 displaystring read-only
DURABLE: { 'public','':all } The SNMPv1/v2c community name string. Duplicate community names are not allowed in this table. Note that a null string is not a valid community name (i.e., a null string forces 'gbnCommonComm2ViewRowStatus' to 'notReady(3)').
                 snmpComm2ViewViewName 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.3 snmpadminstring read-only
DURABLE: { 'internet':all } At runtime (i.e., not when this object is SET), this view name is compared to the 'vacmViewTreeFamilyViewName' in the 'vacmViewTreeFamilyTable' (see RFC2575). If a match is found and the varbind(s) specify valid object type and instance, the 'gbnCommonComm2ViewPermission' privilege is permitted. Note that a null string is not a valid view name value. Also note that the value of this object does not have to match an existing entry in the 'vacmViewTreeFamilyTable' (if no match, no access is allowed). Note that the factory default value for this object is 'internet', which allows access to the subtree under '1.3.6.1'.
                 snmpComm2ViewPermission 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.4 integer read-only
DURABLE: { readWrite:all } This object specifies the type of access allowed. 'readOnly(1)' allows GET operations (i.e., GET, GET-NEXT, GET-BULK) and 'readWrite(2)' allows both GET and SET operations. Enumeration: 'readWrite': 2, 'readOnly': 1.
                 snmpComm2ViewRowStatus 1.3.6.1.4.1.13464.1.2.1.1.7.1.1.5 rowstatus read-only
DURABLE: This object indicates the status of this entry. A row in this table can be created using the 'createAndGo(4)' (i.e., all parameters must be valid - supplied in a single SNMP PDU or have default values) or the 'createAndWait(5)' action states. Until all parameters are valid for a conceptual row, this object is 'notReady(3)'. All parameters must be valid before this object can be set to 'active(1)'. Any object in a conceptual row can be modified independent of the value of this object (e.g., can be changed while 'active(1)').
         snmpNotifyTypeTable 1.3.6.1.4.1.13464.1.2.1.1.7.2 no-access
A table of SNMPv1/v2c notify type .
             snmpNotifyTypeEntry 1.3.6.1.4.1.13464.1.2.1.1.7.2.1 no-access
A list of notify type parameters.
                 snmpPrivateNotifyType 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.1 displaystring read-only
notify type.
                 snmpNotifyTypeStatus 1.3.6.1.4.1.13464.1.2.1.1.7.2.1.2 integer read-write
It signifies if the traps with corresponding notify-type can be sent. Enumeration: 'enable': 1, 'disable': 2.
         gbnPlatformOAMSnmpNotifyType 1.3.6.1.4.1.13464.1.2.1.1.7.3
             snmpNotifyTypeSaveConfiguration 1.3.6.1.4.1.13464.1.2.1.1.7.3.1
A private type for traps or informs. It signifies that the SNMPv2 entity have just saved the configuration.
         snmpTrapSource 1.3.6.1.4.1.13464.1.2.1.1.7.4 integer read-write
The id of vlan or supervlan which interface traps or informs are sent from belongs to. vlan id: 0-4094; supervlan id: 0-11.
         snmpRemoteEngineTable 1.3.6.1.4.1.13464.1.2.1.1.7.5 no-access
A table of remote engine .
             snmpRemoteEngineEntry 1.3.6.1.4.1.13464.1.2.1.1.7.5.1 no-access
A list of remote engine.
                 snmpRemoteEngineID 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.1 displaystring no-access
The remote engine's id.Note that the engine id can only appear once in the table.
                 snmpRemoteHostTAddr 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.2 octet string read-write
The ip and port number of remote host.Note that the value including ip and port number can only appear once in the table.
                 snmpDeleteRemoteEngineTableRow 1.3.6.1.4.1.13464.1.2.1.1.7.5.1.3 integer read-write
You can delete a row by setting the value to 'deleteRow(1)'. Enumeration: 'deleteRow': 1.
         snmpTrapSourceType 1.3.6.1.4.1.13464.1.2.1.1.7.6 integer read-write
The type of the interface which traps or informs are sent from. 1: vlan interface; 2: supervlan interface.
     gbnPlatformOAMSntpClient 1.3.6.1.4.1.13464.1.2.1.1.8
     gbnPlatformOAMSyslog 1.3.6.1.4.1.13464.1.2.1.1.9
     gbnPlatformOAMPortCar 1.3.6.1.4.1.13464.1.2.1.1.10
           portCarTable 1.3.6.1.4.1.13464.1.2.1.1.10.1 no-access
A Table of port CAR.
               portCarEntry 1.3.6.1.4.1.13464.1.2.1.1.10.1.1 no-access
A list of port CAR.
                   portCarPort 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.1 integer32 no-access
The port number.
                   portCarEnable 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.2 truthvalue read-write
The enable status of the port CAR
                   portDiscardBpdu 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.3 integer32 read-write
The enable status of the port discard BPDU
                   portCarRateBpdu 1.3.6.1.4.1.13464.1.2.1.1.10.1.1.4 integer32 read-write
The port CAR max packet receive rate.
           portCarGlobalEnable 1.3.6.1.4.1.13464.1.2.1.1.10.2 truthvalue read-write
The global enable status of port CAR.
           portCarOpenTime 1.3.6.1.4.1.13464.1.2.1.1.10.3 integer32 read-write
The closed port Re-open time.
           discardBpdu 1.3.6.1.4.1.13464.1.2.1.1.10.4 integer32 read-write
The global enable status of port discard BPDU.
           portCarRate 1.3.6.1.4.1.13464.1.2.1.1.10.5 integer32 read-write
The port CAR max packet receive rate.
     gbnPlatformOAMSsh 1.3.6.1.4.1.13464.1.2.1.1.11
     gbnPlatformOAMMailalarm 1.3.6.1.4.1.13464.1.2.1.1.12
     gbnPlatformOAMVctRun 1.3.6.1.4.1.13464.1.2.1.1.13
           vctRunTable 1.3.6.1.4.1.13464.1.2.1.1.13.1 no-access
A Table of VCT run.
               vctRunEntry 1.3.6.1.4.1.13464.1.2.1.1.13.1.1 no-access
A list of VCT run.
                   vctRunPort 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.1 integer32 no-access
The port number.
                   vctRunEnable 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.2 truthvalue read-write
The enable status of the VCT run
                   vctAutoRunEnable 1.3.6.1.4.1.13464.1.2.1.1.13.1.1.3 truthvalue read-write
The enable status of the VCT auto run
           vctAutoRunGlobalEnable 1.3.6.1.4.1.13464.1.2.1.1.13.2 truthvalue read-write
The global enable status of VCT auto run.
     gbnPlatformOAMVctRunResult 1.3.6.1.4.1.13464.1.2.1.1.14
           vctRunResultTable 1.3.6.1.4.1.13464.1.2.1.1.14.1 no-access
A Table of VCT run result.
               vctRunResultEntry 1.3.6.1.4.1.13464.1.2.1.1.14.1.1 no-access
A list of VCT run result.
                   vctRunResultPort 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.1 integer32 no-access
The port number.
                   vctRunResultTxRxPairNo 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.2 vctrunresulttxrxpairnotype no-access
The tx rx pair NO.
                   vctRunResultStatus 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.3 vctrunresultstatustype read-only
The status of the VCT run result
                   vctRunResultErrorLocation 1.3.6.1.4.1.13464.1.2.1.1.14.1.1.4 integer32 read-only
The error location of the VCT run result