Fore-frs-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: Fore-frs-MIB
Download as:   
SNMPv2-CONF, IF-MIB, Fore-Common-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 foreFrameRelayModule 1.3.6.1.4.1.326.1.16.1
This MIB is considered as being required in addition to the standard mibs RFC1604 and RFC1315. It provides configuration and statistics information at frame relay service and connection level.
     frextDlcmiTable 1.3.6.1.4.1.326.1.16.1.1 no-access
The Parameters for the Data Link Connection Management Interface corresponding to any given ifEntry. These parameters are logical extensions to those in contained within the object frDlcmiTable in RFC1315.
         frextDlcmiEntry 1.3.6.1.4.1.326.1.16.1.1.1 no-access
The Parameters for the Data Link Connection Management Interface.
             frextDlcmiServiceIfIndex 1.3.6.1.4.1.326.1.16.1.1.1.1 interfaceindex read-only
The Service/FR-UNI identifier ifIndex value of the corresponding ifEntry.
             frextDlcmiProfileLmiIndex 1.3.6.1.4.1.326.1.16.1.1.1.2 integer32 read-write
Index for the LMI profile for this FR service.
             frextDlcmiProfileServiceIndex 1.3.6.1.4.1.326.1.16.1.1.1.3 integer32 read-write
Index of the Service profile for this FR service.
             frextDlcmiStatsMonitor 1.3.6.1.4.1.326.1.16.1.1.1.4 integer read-write
This object specifies whether statistics are to be counted at a service level, this includes service and connection statistics. When the state changes from enabled to disabled all the related statistics will be frozen at their current value. When the state changes from disabled to enabled then all related statistics will be reset (zeroised). Note that this Monitor is overriden by the netmod level nmFramStatsMonitor. Refer to fore-fram.mib for more details. Enumeration: 'disabled': 2, 'enabled': 1.
             frextDlcmiStatsEnabledTimeStamp 1.3.6.1.4.1.326.1.16.1.1.1.5 timeticks read-only
This object reflects the point in time, with reference to sysUpTime, either when frextDlcmiStatsMonitor is set to enabled or when nmFramStatsMonitor is set to enabled. The time will reflect the last StatsMonitor to be enabled. The timestamp provides a starting timestamp for the current statistics that are being counted.
             frextDlcmiLmiDlci 1.3.6.1.4.1.326.1.16.1.1.1.6 integer32 read-only
the dlci upon which LMI traffic will be broadcast. If Q933-AnnexA=0, otherwise STRATACOM=1023.
             frextDlcmiLmiFlowControl 1.3.6.1.4.1.326.1.16.1.1.1.7 integer read-write
Specifies whether STRATACOM LMI based (R-bit) notification performs flow control for the Circuits on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
             frextDlcmiRAControl 1.3.6.1.4.1.326.1.16.1.1.1.8 integer read-write
Specifies whether Rate Adaptation-RA performs flow control for the Circuits on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
             frextDlcmiLmiBandwidthControl 1.3.6.1.4.1.326.1.16.1.1.1.9 integer read-write
Specifies whether STRATACOM LMI based CIR notification affects the CIR flow control parameters for the connections on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
             frextDlcmiRxAbortedFrames 1.3.6.1.4.1.326.1.16.1.1.1.10 counter32 read-only
The number of aborted frames received on this Frame Relay logical interface.A frame is considered aborted after receiving 7 or more continuous ones.
             frextDlcmiRcvCrcErrors 1.3.6.1.4.1.326.1.16.1.1.1.11 counter32 read-only
Specifies the number of frames receive with CRC errors on this interface.
             frextDlcmiRcvShortFrames 1.3.6.1.4.1.326.1.16.1.1.1.12 counter32 read-only
The number of frames containing less than 5 octets received on this interface.
             frextDlcmiRcvLongFrames 1.3.6.1.4.1.326.1.16.1.1.1.13 counter32 read-only
The number of frames containing greater than 8191 octets received on this interface.
             frextDlcmiRcvInvalidDLCI 1.3.6.1.4.1.326.1.16.1.1.1.14 counter32 read-only
The number of frames with an invalid DLCI received on this interface.
             frextDlcmiRcvUnknownErrs 1.3.6.1.4.1.326.1.16.1.1.1.15 counter32 read-only
The number of frames with other errors received on this interface.
             frextDlcmiLmiTxStatusResponses 1.3.6.1.4.1.326.1.16.1.1.1.16 counter32 read-only
Number of STATUS messages transmited on this interface.
             frextDlcmiLmiTxFullStatusResponses 1.3.6.1.4.1.326.1.16.1.1.1.17 counter32 read-only
Number of STATUS messages with full status IE transmited on this interface.
             frextDlcmiLmiTxStatusEnquiries 1.3.6.1.4.1.326.1.16.1.1.1.18 counter32 read-only
Number of STATUS ENQUIRY messages transmited on this interface.
             frextDlcmiLmiTxFullStatusEnquiries 1.3.6.1.4.1.326.1.16.1.1.1.19 counter32 read-only
Number of STATUS ENQUIRY messages with full status IE transmited on this interface.
             frextDlcmiLmiRxStatusResponses 1.3.6.1.4.1.326.1.16.1.1.1.20 counter32 read-only
Number of STATUS messages received on this interface.
             frextDlcmiLmiRxFullStatusResponses 1.3.6.1.4.1.326.1.16.1.1.1.21 counter32 read-only
Number of STATUS messages with full status IE received on this interface.
             frextDlcmiLmiRxStatusEnquiries 1.3.6.1.4.1.326.1.16.1.1.1.22 counter32 read-only
Number of STATUS messages received on this interface.
             frextDlcmiLmiRxFullStatusEnquiries 1.3.6.1.4.1.326.1.16.1.1.1.23 counter32 read-only
Number of STATUS ENQUIRY messages with full status IE (Information Element) receive on this interface.
             frextDlcmiLmiUnknownMessagesRcvd 1.3.6.1.4.1.326.1.16.1.1.1.24 counter32 read-only
Number of Unknown LMI messages received on this interface.
             frextDlcmiLmiStatusLostSequences 1.3.6.1.4.1.326.1.16.1.1.1.25 counter32 read-only
The total number of times a loss of sequencing in received STATUS messages was detected on this interface.
             frextDlcmiLmiStatusEnqLostSequences 1.3.6.1.4.1.326.1.16.1.1.1.26 counter32 read-only
The total number of times a loss of sequencing in received STATUS ENQUIRY messages was detected on this interface.
             frextDlcmiLmiMissingStatEnquiries 1.3.6.1.4.1.326.1.16.1.1.1.27 counter32 read-only
The number of times an expected STATUS ENQUIRY message was not received within the expected time on this interface.
             frextDlcmiLmiUnexpectedPVCStatMsg 1.3.6.1.4.1.326.1.16.1.1.1.28 counter32 read-only
The number of LMI messages that were received with unexpected PVC STATUS IE on this interface.
             frextDlcmiLmiUnexpectedDLCI 1.3.6.1.4.1.326.1.16.1.1.1.29 counter32 read-only
The number of STATUS messages received with unconfigured DLCI
             frextDlcmiLmiStatEnqRatePlus 1.3.6.1.4.1.326.1.16.1.1.1.30 counter32 read-only
The number of times the STATUS ENQUIRY message was received more frequently than expected. For STRATACOM only
             frextDlcmiLmiInvInfoFrame 1.3.6.1.4.1.326.1.16.1.1.1.31 counter32 read-only
The number of times an LMI message was received with information type not equal to unnumbered information type.
             frextDlcmiLmiInvFrameHdr 1.3.6.1.4.1.326.1.16.1.1.1.32 counter32 read-only
The number of LMI frames received with error in the header bits.
             frextDlcmiLmiNoIERepType 1.3.6.1.4.1.326.1.16.1.1.1.33 counter32 read-only
The number of times an LMI frame was received with missing Report Type IE
             frextDlcmiLmiNoIEKeepAlive 1.3.6.1.4.1.326.1.16.1.1.1.34 counter32 read-only
The number of times an LMI frame was received with missing Link Integrity Verification IE.
             frextDlcmiLmiMissingResponses 1.3.6.1.4.1.326.1.16.1.1.1.35 counter32 read-only
The total number of times a timeout occurred without receiving a response to an LMI request by this interface.
             frextDlcmiLmiUnsuppIERcvd 1.3.6.1.4.1.326.1.16.1.1.1.36 counter32 read-only
The number of LMI messages received with unknown Information Element.
             frextDlcmiPvccs 1.3.6.1.4.1.326.1.16.1.1.1.37 gauge32 read-only
The number of permanent VCCs established on this Frame Relay logical interface
     frextCircuitTable 1.3.6.1.4.1.326.1.16.1.2 no-access
A table containing information about specific Data Link Connection Identifiers and corresponding connections.
         frextCircuitEntry 1.3.6.1.4.1.326.1.16.1.2.1 no-access
The information regarding a single Data Link Connection Identifier.
             frextCircuitServiceIfIndex 1.3.6.1.4.1.326.1.16.1.2.1.1 interfaceindex read-only
IfIndex of the Frame Relay Interface,UNI, to which data received from ATM is forwarded.The index generated by the agent for Frame Relay service identification. This index is volatile over power down
             frextCircuitDlci 1.3.6.1.4.1.326.1.16.1.2.1.2 integer32 read-only
The connections' Frame Relay DLCI.
             frextCircuitName 1.3.6.1.4.1.326.1.16.1.2.1.3 displaystring read-write
The user-defined name for the connection.
             frextCircuitProfileFrRateIndex 1.3.6.1.4.1.326.1.16.1.2.1.4 integer32 read-write
Index of the ProfileFRRateTable (rate enforcement/rate adaptation configuration for this FR/ATM interworking connection
             frextCircuitREMonitor 1.3.6.1.4.1.326.1.16.1.2.1.5 integer read-write
This object enables or disables the monitoring of Bc, Be and CIR on the Rx side of the connection, called Rate Enforcement.If set to none, no monitoring will be performed. If set to standard, Rx monitoring will drop any frames received in excess of Be, and will tag frames received in between Bc and Be Enumeration: 'none': 1, 'standard': 2.
             frextCircuitRateFallbacks 1.3.6.1.4.1.326.1.16.1.2.1.6 counter32 read-only
The number of times that the insertion rate was lowered (due to network congestion reports) since the connection was created.
             frextCircuitRateFallforwards 1.3.6.1.4.1.326.1.16.1.2.1.7 counter32 read-only
The number of times that the insertion rate was increased (due to lack of network congestion reports) since the connection was created.
             frextCircuitEgFramesDroppedQueueFull 1.3.6.1.4.1.326.1.16.1.2.1.8 counter32 read-only
Number of frames which were dropped on this connection because the hold queue was full.
             frextCircuitNormalSentFrames 1.3.6.1.4.1.326.1.16.1.2.1.9 counter32 read-only
Number of frames sent on this connection within the Commited Information Rate since the connection was created.
             frextCircuitNormalSentOctets 1.3.6.1.4.1.326.1.16.1.2.1.10 counter32 read-only
Number of octets sent on this connection within the Commited Information Rate since the connection was created.
             frextCircuitExcessSentOctets 1.3.6.1.4.1.326.1.16.1.2.1.11 counter32 read-only
Number of octets sent on this connection above the Commited Information Rate, but below the Excess Information Rate since the connection was created.
             frextCircuitHeldBuffers 1.3.6.1.4.1.326.1.16.1.2.1.12 counter32 read-only
Number of buffers which were used by the connection for enqueueing frames in preference to exceeding the allowed burst rate on this connection since the connection was created.
             frextCircuitOctetsOnQueue 1.3.6.1.4.1.326.1.16.1.2.1.13 counter32 read-only
Number of octets currently being used for enqueueing frames in order to be transmited.
             frextCircuitBuffersOnQueue 1.3.6.1.4.1.326.1.16.1.2.1.14 counter32 read-only
Number of buffers currently being used for enqueueing frames in order to be transmited.
             frextCircuitRxMonNormalFrames 1.3.6.1.4.1.326.1.16.1.2.1.15 counter32 read-only
The number of frames received on the connection within the committed burst (Bc).
             frextCircuitRxMonNormalOctets 1.3.6.1.4.1.326.1.16.1.2.1.16 counter32 read-only
The number of octets received on the connection within the committed burst (Bc).
             frextCircuitRxMonExcessOctets 1.3.6.1.4.1.326.1.16.1.2.1.17 counter32 read-only
The number of octets received on the connection within the excess burst (Be).
             frextCircuitRxMonDroppedOctets 1.3.6.1.4.1.326.1.16.1.2.1.18 counter32 read-only
The number of octets received on the connection that were dropped because they were in excess Bc+Be.
             frextCircuitRxMonDroppedDEFrames 1.3.6.1.4.1.326.1.16.1.2.1.19 counter32 read-only
The number of frames with the DE bit set received on the connection that were dropped.
             frextCircuitRxMonDroppedDEOctets 1.3.6.1.4.1.326.1.16.1.2.1.20 counter32 read-only
The number of octets in frames with the DE bit set received on the connection that were dropped.
             frextCircuitRxMonDEOctets 1.3.6.1.4.1.326.1.16.1.2.1.21 counter32 read-only
The number of octets with the DE bit set that were received on the connection.
             frextCircuitRxMonSetDEFrames 1.3.6.1.4.1.326.1.16.1.2.1.22 counter32 read-only
The number of frames received on the connection in which the Rx monitor set the DE bit.
             frextCircuitRxMonSetDEOctets 1.3.6.1.4.1.326.1.16.1.2.1.23 counter32 read-only
The number of octets in frames received on the connection in which the Rx monitor set the DE bit.
             frextCircuitRecvdBECNS 1.3.6.1.4.1.326.1.16.1.2.1.24 counter32 read-only
Number of frames received from the network in- dicating forward congestion since the connection was created. This object is defined in this table to provide the same object as defined in RFC 1315, while the interface is defined as a DCE.
             frextCircuitRecvdFECNS 1.3.6.1.4.1.326.1.16.1.2.1.25 counter32 read-only
Number of frames received from the network in- dicating backward congestion since the connection was created.This object is defined in this table to provide the same object as defined in RFC 1315, while the interface is defined as a DCE.
     frsOamF5Table 1.3.6.1.4.1.326.1.16.1.3 no-access
The OAM statistics table on a VCC basis
         frsOamF5Entry 1.3.6.1.4.1.326.1.16.1.3.1 no-access
An Entry in the OAM F5 statistics table on a VCC basis
             frsOamF5AtmIf 1.3.6.1.4.1.326.1.16.1.3.1.1 integer32 read-only
The Atm interface index corresponds to the port. This is also the index of the portTable.
             frsOamF5AtmVpi 1.3.6.1.4.1.326.1.16.1.3.1.2 integer32 read-only
VPI of the ATM VCC on which FR DLCI maps onto
             frsOamF5AtmVci 1.3.6.1.4.1.326.1.16.1.3.1.3 integer32 read-only
VCI of the ATM VCC on which FR DLCI maps onto
             frsOamF5AISRxCounter 1.3.6.1.4.1.326.1.16.1.3.1.4 counter32 read-only
Number of VC-AIS cells received since the PVC was brought into service.
             frsOamF5AISTxCounter 1.3.6.1.4.1.326.1.16.1.3.1.5 counter32 read-only
Number of VC-AIS cells transmited since the PVC was brought into service.
             frsOamF5RDIRxCounter 1.3.6.1.4.1.326.1.16.1.3.1.6 counter32 read-only
Number of VC-RDI cells received since the PVC was brought into service.
             frsOamF5RDITxCounter 1.3.6.1.4.1.326.1.16.1.3.1.7 counter32 read-only
Number of VC-RDI cells transmited since the PVC was brought into service.