Fore-Adapter-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: Fore-Adapter-MIB
Download as:   
Fore-Common-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atmAdapter 1.3.6.1.4.1.326.2.1
Fore Atm Adapter MIB
     adapterGroup 1.3.6.1.4.1.326.2.1.1
         adapterTable 1.3.6.1.4.1.326.2.1.1.1 no-access
A table of adapter information.
             adapterEntry 1.3.6.1.4.1.326.2.1.1.1.1 no-access
A table entry containing adapter information.
                 adapterInterface 1.3.6.1.4.1.326.2.1.1.1.1.1 integer32 read-only
The ifIndex corresponding to this ATM adapter.
                 adapterSerialNumber 1.3.6.1.4.1.326.2.1.1.1.1.2 integer32 read-only
The serial number of the ATM adapter hardware.
                 adapterHardwareVersion 1.3.6.1.4.1.326.2.1.1.1.1.3 integer32 read-only
The version of the ATM adapter hardware. The version number is encoded into 6 hex digits. For example, version 1.1 is encoded as 0x010100.
                 adapterHardwareSpeed 1.3.6.1.4.1.326.2.1.1.1.1.4 integer32 read-only
The speed of the ATM adapter hardware.
                 adapterFirmwareVersion 1.3.6.1.4.1.326.2.1.1.1.1.5 integer32 read-only
The version of the ATM adapter firmware. The version number is encoded into 6 hex digits. For example, version 1.1 is encoded as 0x010100.
                 adapterSoftwareVersion 1.3.6.1.4.1.326.2.1.1.1.1.6 integer32 read-only
The version of the ATM adapter software. The version number is encoded into 6 hex digits. For example, version 2.2.0 is encoded as 0x020200.
                 adapterTransmitBufferSize 1.3.6.1.4.1.326.2.1.1.1.1.7 integer32 read-only
The size of the transmit buffer, in cells.
                 adapterTransmitQueueLength 1.3.6.1.4.1.326.2.1.1.1.1.8 gauge32 read-only
The number of cells in the transmit buffer.
                 adapterReceiveBufferSize 1.3.6.1.4.1.326.2.1.1.1.1.9 integer32 read-only
The size of the receive buffer, in cells.
                 adapterReceiveQueueLength 1.3.6.1.4.1.326.2.1.1.1.1.10 gauge32 read-only
The number of cells in the receive buffer.
                 adapterOperStatus 1.3.6.1.4.1.326.2.1.1.1.1.11 integer read-only
The current operational state of the adapter. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                 adapterCarrier 1.3.6.1.4.1.326.2.1.1.1.1.12 integer read-only
The presence or absence of carrier on the link. Enumeration: 'carrier': 1, 'noCarrier': 2.
                 adapterAddress 1.3.6.1.4.1.326.2.1.1.1.1.13 spansaddress read-only
The address of this ATM adapter.
                 adapterUptime 1.3.6.1.4.1.326.2.1.1.1.1.14 timeticks read-only
The length of time this ATM adapter has been up, in hundredths of a second.
                 adapterPhyLayer 1.3.6.1.4.1.326.2.1.1.1.1.15 integer read-only
The physical layer of the adapter. Enumeration: 'phy-4B5B-MMODE-140': 2, 'phy-OC3-MMODE-SC': 5, 'phy-OC3-SMODE-SHORT': 8, 'phy-4B5B-SMODE-100': 6, 'phy-UTP5-SONET': 10, 'phy-OC3-MMODE-ST': 4, 'phy-STP1-SONET': 11, 'phy-4B5B-SMODE-140': 7, 'phy-4B5B-MMODE-100': 1, 'phy-OC3-SMODE-LONG': 9, 'phy-ASX-100': 3.
                 adapterType 1.3.6.1.4.1.326.2.1.1.1.1.16 integer read-only
The hardware type of the adapter. Enumeration: 'type-SBA-200': 6, 'type-NBA-200': 13, 'type-SBA-100': 1, 'type-ESA-200': 8, 'type-ESA-200PC': 12, 'type-ASX-200': 10, 'type-GIA-200': 15, 'type-ASX-100': 5, 'type-PCA-200': 14, 'type-TCA-100': 3, 'type-PCA-200e': 19, 'type-GIA-100': 2, 'type-VMA-200': 7, 'type-HPA-200': 11, 'type-NXA-100': 4, 'type-ESA-200e': 17, 'type-SBA-200e': 16, 'type-VMA-200e': 21, 'type-MCA-200e': 22, 'type-MCA-200': 9, 'type-GIA-200e': 18, 'type-LANNET': 20.
                 adapterFirmwareVersionText 1.3.6.1.4.1.326.2.1.1.1.1.17 displaystring read-only
The version of the ATM adapter firmware. This object provides text information about the internal software configuration that was used when the firmware was built.
                 adapterSoftwareVersionText 1.3.6.1.4.1.326.2.1.1.1.1.18 displaystring read-only
The version of the ATM adapter software. This object provides text information about the internal software configuration that was used when the ATM adapter software was built.
     phyLayerGroup 1.3.6.1.4.1.326.2.1.2
         phyLayerTable 1.3.6.1.4.1.326.2.1.2.1 no-access
A table of adapter physical layer information.
             phyLayerEntry 1.3.6.1.4.1.326.2.1.2.1.1 no-access
A table entry containing adapter physical layer information.
                 phyLayerInterface 1.3.6.1.4.1.326.2.1.2.1.1.1 integer32 read-only
This object identifies the ATM adapter.
                 phyLayerFramingErrors 1.3.6.1.4.1.326.2.1.2.1.1.2 counter32 read-only
The number of ATM cells received with incorrect physical layer framing.
                 phyLayerHeaderCRCErrors 1.3.6.1.4.1.326.2.1.2.1.1.3 counter32 read-only
The number of ATM cells received with bad header CRCs.
     atmLayerGroup 1.3.6.1.4.1.326.2.1.3
         atmLayerTable 1.3.6.1.4.1.326.2.1.3.1 no-access
A table of ATM layer information.
             atmLayerEntry 1.3.6.1.4.1.326.2.1.3.1.1 no-access
A table entry containing ATM layer information.
                 atmInterface 1.3.6.1.4.1.326.2.1.3.1.1.1 integer32 read-only
This object identifies the ATM interface.
                 atmTransmittedCells 1.3.6.1.4.1.326.2.1.3.1.1.2 counter32 read-only
The number of ATM cells transmitted.
                 atmReceivedCells 1.3.6.1.4.1.326.2.1.3.1.1.3 counter32 read-only
The number of ATM cells received.
                 atmOutOfRangeVPIs 1.3.6.1.4.1.326.2.1.3.1.1.4 counter32 read-only
The number of ATM cells received with VPI values that were out of range.
                 atmUnconnectedVPIs 1.3.6.1.4.1.326.2.1.3.1.1.5 counter32 read-only
The number of ATM cells received with VPI values that were in range but did not correspond to active connections.
                 atmOutOfRangeVCIs 1.3.6.1.4.1.326.2.1.3.1.1.6 counter32 read-only
The number of ATM cells received with VCI values that were out of range.
                 atmUnconnectedVCIs 1.3.6.1.4.1.326.2.1.3.1.1.7 counter32 read-only
The number of ATM cells received with VCI values that were in range but did not correspond to active connections.
     aalGroup 1.3.6.1.4.1.326.2.1.4
         aal4Table 1.3.6.1.4.1.326.2.1.4.1 no-access
A table of ATM adaptation layer type 3/4 information.
             aal4Entry 1.3.6.1.4.1.326.2.1.4.1.1 no-access
A table entry containing ATM adaptation layer type 3/4 information.
                 aal4Interface 1.3.6.1.4.1.326.2.1.4.1.1.1 integer32 read-only
This object identifies the ATM interface.
                 aal4TransmittedCells 1.3.6.1.4.1.326.2.1.4.1.1.2 counter32 read-only
The number of AAL type 4 cells transmitted.
                 aal4ReceivedCells 1.3.6.1.4.1.326.2.1.4.1.1.3 counter32 read-only
The number of AAL type 4 cells received.
                 aal4TransmittedPDUs 1.3.6.1.4.1.326.2.1.4.1.1.4 counter32 read-only
The number of AAL type 4 protocol data units (PDUs) transmitted.
                 aal4ReceivedPDUs 1.3.6.1.4.1.326.2.1.4.1.1.5 counter32 read-only
The number of AAL type 4 protocol data units (PDUs) received.
                 aal4PayloadCRCErrors 1.3.6.1.4.1.326.2.1.4.1.1.6 counter32 read-only
The number of ATM cells received with payload CRC errors.
                 aal4SARProtocolErrors 1.3.6.1.4.1.326.2.1.4.1.1.7 counter32 read-only
The number of ATM cells that the adaptation layer rejected due to SAR layer protocol errors.
                 aal4CSProtocolErrors 1.3.6.1.4.1.326.2.1.4.1.1.8 counter32 read-only
The number of ATM cells that the adaptation layer rejected due to CS layer protocol errors.
                 aal4CellsDiscards 1.3.6.1.4.1.326.2.1.4.1.1.9 counter32 read-only
The number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.
                 aal4PDUsDiscards 1.3.6.1.4.1.326.2.1.4.1.1.10 counter32 read-only
The number of CS-PDUs that the adaptation layer discarded due to queue overflows.
         aal5Table 1.3.6.1.4.1.326.2.1.4.2 no-access
A table of ATM adaptation layer type 5 information.
             aal5Entry 1.3.6.1.4.1.326.2.1.4.2.1 no-access
A table entry containing ATM adaptation layer type 5 information.
                 aal5Interface 1.3.6.1.4.1.326.2.1.4.2.1.1 integer32 read-only
This object identifies the ATM interface.
                 aal5TransmittedCells 1.3.6.1.4.1.326.2.1.4.2.1.2 counter32 read-only
The number of AAL type 5 cells transmitted.
                 aal5ReceivedCells 1.3.6.1.4.1.326.2.1.4.2.1.3 counter32 read-only
The number of AAL type 5 cells received.
                 aal5TransmittedPDUs 1.3.6.1.4.1.326.2.1.4.2.1.4 counter32 read-only
The number of AAL type 5 protocol data units (PDUs) transmitted.
                 aal5ReceivedPDUs 1.3.6.1.4.1.326.2.1.4.2.1.5 counter32 read-only
The number of AAL type 5 protocol data units received.
                 aal5CRCErrors 1.3.6.1.4.1.326.2.1.4.2.1.6 counter32 read-only
The number of CS-PDUs received with protocol data unit CRC errors.
                 aal5CSProtocolErrors 1.3.6.1.4.1.326.2.1.4.2.1.7 counter32 read-only
The number of CS-PDUs that the adaptation layer rejected due to CS layer protocol errors.
                 aal5CellsDiscards 1.3.6.1.4.1.326.2.1.4.2.1.8 counter32 read-only
The number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.
                 aal5PDUsDiscards 1.3.6.1.4.1.326.2.1.4.2.1.9 counter32 read-only
The number of CS-PDUs that the adaptation layer discarded.
         aal0Table 1.3.6.1.4.1.326.2.1.4.3 no-access
A table of ATM adaptation layer type 0 (user defined adaptation layer) information.
             aal0Entry 1.3.6.1.4.1.326.2.1.4.3.1 no-access
A table entry containing ATM adaptation layer type 0 (user defined adaptation layer) information.
                 aal0Interface 1.3.6.1.4.1.326.2.1.4.3.1.1 integer32 read-only
This object identifies the ATM interface.
                 aal0TransmittedCells 1.3.6.1.4.1.326.2.1.4.3.1.2 counter32 read-only
The number of AAL type 0 cells transmitted.
                 aal0ReceivedCells 1.3.6.1.4.1.326.2.1.4.3.1.3 counter32 read-only
The number of AAL type 0 cells received.
                 aal0CellsDiscards 1.3.6.1.4.1.326.2.1.4.3.1.4 counter32 read-only
The number of ATM cells that the adaptation layer discarded in the course of dropping partially reassembled PDUs.
     connGroup 1.3.6.1.4.1.326.2.1.5
         connTable 1.3.6.1.4.1.326.2.1.5.1 no-access
A table of information about ATM connections.
             connEntry 1.3.6.1.4.1.326.2.1.5.1.1 no-access
A table entry containing information about an ATM connection.
                 connInterface 1.3.6.1.4.1.326.2.1.5.1.1.1 integer32 read-only
This object identifies the ATM interface.
                 connDirection 1.3.6.1.4.1.326.2.1.5.1.1.2 integer read-only
The direction of this connection. Enumeration: 'outgoing': 2, 'incoming': 1.
                 connVPI 1.3.6.1.4.1.326.2.1.5.1.1.3 integer32 read-only
The Virtual Path Identifier for this connection.
                 connVCI 1.3.6.1.4.1.326.2.1.5.1.1.4 integer32 read-only
The Virtual Channel Identifier for this connection.
                 connLocalSAP 1.3.6.1.4.1.326.2.1.5.1.1.5 integer32 read-only
The local SAP for this connection.
                 connRemoteSAP 1.3.6.1.4.1.326.2.1.5.1.1.6 integer32 read-only
The remote SAP for this connection.
                 connRemoteAddress 1.3.6.1.4.1.326.2.1.5.1.1.7 spansaddress read-only
The ATM address of the remote end of this connection.
                 connPeakBandwidth 1.3.6.1.4.1.326.2.1.5.1.1.8 integer32 read-only
The peak bandwidth for this connection, in kilobits per second.
                 connMeanBandwidth 1.3.6.1.4.1.326.2.1.5.1.1.9 integer32 read-only
The mean bandwidth for this connection, in kilobits per second.
                 connMeanBurst 1.3.6.1.4.1.326.2.1.5.1.1.10 integer32 read-only
The mean burst length for this connection, in kilobits.
                 connUptime 1.3.6.1.4.1.326.2.1.5.1.1.11 timeticks read-only
The length of time since this connection was created, in hundredths of a second.
     sonetGroup 1.3.6.1.4.1.326.2.1.6
         sonetAdapterConfGroup 1.3.6.1.4.1.326.2.1.6.1
         sonetAdapterStatsGroup 1.3.6.1.4.1.326.2.1.6.2
     statsGroup 1.3.6.1.4.1.326.2.1.7
     atmIpGroup 1.3.6.1.4.1.326.2.1.8
         atmarpGroup 1.3.6.1.4.1.326.2.1.8.1
             atmarpFlushTable 1.3.6.1.4.1.326.2.1.8.1.1 integer read-write
A SNMP agent will flush the ATM ARP table when this variable is set to enable(2). After the operation is done, the value of this object is disable(1). Enumeration: 'enable': 2, 'disable': 1.
             atmarpTable 1.3.6.1.4.1.326.2.1.8.1.2 no-access
A table for ATM ARP information.
                 atmarpEntry 1.3.6.1.4.1.326.2.1.8.1.2.1 no-access
A table entry containing information about an ATM ARP connection.
                     atmarpIpAddress 1.3.6.1.4.1.326.2.1.8.1.2.1.1 ipaddress read-only
This object identifies the remote IP address for this ATM ARP entry.
                     atmarpInterface 1.3.6.1.4.1.326.2.1.8.1.2.1.2 integer32 read-write
This object identifies the ATM IP interface (ifIndex) on which this mapping is effective.
                     atmarpSpansAddress 1.3.6.1.4.1.326.2.1.8.1.2.1.3 spansaddress read-only
This object identifies the remote SPANS address for this ATM ARP entry.
                     atmarpNsapAddress 1.3.6.1.4.1.326.2.1.8.1.2.1.4 nsapaddr read-write
This object identifies the remote NSAP (Network Service Access Point) for this ATM ARP entry. This object can be used for manually editing the ARP table to include IP to NSAP address mapping for devices that do not support Classical IP ARP.
                     atmarpVPI 1.3.6.1.4.1.326.2.1.8.1.2.1.5 integer32 read-write
The Virtual Path Identifier for this connection.
                     atmarpVCI 1.3.6.1.4.1.326.2.1.8.1.2.1.6 integer32 read-write
The Virtual Channel Identifier for this connection.
                     atmarpConnType 1.3.6.1.4.1.326.2.1.8.1.2.1.7 integer read-write
The type of the connection by which the IP address can be reached. The value foreIpPVC(1) indicates the connection is a FORE IP Permanent Virtual Circuit, foreIpSVC(2) indicates it's a FORE IP Switched Virtual Circuit. The value classicalIpPVC(3) indicates the connection is a Classical IP Permanent Virtual Circuit, and the value classicalIpSVC(4) indicates the connection is a Classical IP Switched Virtual Circuit. Enumeration: 'classicalIpSVC': 4, 'foreIpPVC': 1, 'foreIpSVC': 2, 'classicalIpPVC': 3.
                     atmarpAALType 1.3.6.1.4.1.326.2.1.8.1.2.1.8 integer read-write
The type of the AAL (ATM Adaptation Layer) of this connection. Enumeration: 'aal34': 1, 'aal5': 2.
                     atmarpPeakBandwidth 1.3.6.1.4.1.326.2.1.8.1.2.1.9 integer32 read-write
The peak bandwidth for this connection, in kilobits per second.
                     atmarpConnDirection 1.3.6.1.4.1.326.2.1.8.1.2.1.10 integer read-only
The direction of this connection. The value pending(3) is used for an ATM ARP entry that does not have a connection associated with it. Enumeration: 'bidirectional': 2, 'outgoing': 1, 'pending': 3.
                     atmarpEntryValidity 1.3.6.1.4.1.326.2.1.8.1.2.1.11 integer read-only
The validity of this ATM ARP entry. A Classical IP connection entry may be invalid(2) if the remote end of the connection does not answer ARP requests for a while. The entry still exists, but the host is not allowed to send data across it when the entry is in the invalid(2) state. Enumeration: 'valid': 1, 'invalid': 2.
                     atmarpEntryType 1.3.6.1.4.1.326.2.1.8.1.2.1.12 integer read-only
This object indicates the type of mapping. Dynamic entries are learned from Fore IP or Classical IP mechanisms. Static entries are created manually. Enumeration: 'static': 2, 'dynamic': 1.
                     atmarpEntryStatus 1.3.6.1.4.1.326.2.1.8.1.2.1.13 entrystatus read-write
The status of this ATM ARP entry.
         classicalIpGroup 1.3.6.1.4.1.326.2.1.8.2
             classicalIpArpTable 1.3.6.1.4.1.326.2.1.8.2.1 no-access
A table for Classical IP ARP information.
                 classicalIpArpEntry 1.3.6.1.4.1.326.2.1.8.2.1.1 no-access
A table entry containing information about Classical IP ARP configuration.
                     classicalIpArpIfIndex 1.3.6.1.4.1.326.2.1.8.2.1.1.1 integer32 read-only
The ifIndex corresponding to the ATM interface on which the following classical IP information is configured.
                     classicalIpArpServerIndex 1.3.6.1.4.1.326.2.1.8.2.1.1.2 integer32 read-only
The index of the ARP server.
                     classicalIpArpServer 1.3.6.1.4.1.326.2.1.8.2.1.1.3 integer read-write
An SNMP agent will configure this virtual interface as a Classical IP ARP Server when this variable is set to enable(2). Enumeration: 'enable': 2, 'disable': 1.
                     classicalIpArpServerConfigType 1.3.6.1.4.1.326.2.1.8.2.1.1.4 integer read-write
This object identifies the way in which the NSAP (Network Service Access Point) address of the ARP server is determined. When the value of this object is wellKnown(2), the NSAP address of the ARP server is taken from the classicalIpWellKNownArpServerAddr object. When the value of this object is set to manualConfig(1), the NSAP address of the ARP server is read from the classicalIpManualConfigArpServerAddr object. Enumeration: 'wellKnown': 2, 'manualConfig': 1.
                     classicalIpWellKnownArpServerAddr 1.3.6.1.4.1.326.2.1.8.2.1.1.5 nsapaddr read-only
This variable holds the well known NSAP (Network Service Access Point) address of the ARP server for this interface.
                     classicalIpManualConfigArpServerAddr 1.3.6.1.4.1.326.2.1.8.2.1.1.6 nsapaddr read-write
This variable holds the manually configured NSAP (Network Service Access Point) address of the ARP server for this interface. By default this object is set to all zero.
         ipFilterGroup 1.3.6.1.4.1.326.2.1.8.3
             ipFilterConfGroup 1.3.6.1.4.1.326.2.1.8.3.1
                 ipFilterTable 1.3.6.1.4.1.326.2.1.8.3.1.1 no-access
A table of authorized ip addresses from which the switch can receive IP packets.
                     ipFilterEntry 1.3.6.1.4.1.326.2.1.8.3.1.1.1 no-access
A table entry containing ip filter information.
                         ipFilterIpAddress 1.3.6.1.4.1.326.2.1.8.3.1.1.1.1 ipaddress no-access
The authorized IP Address, in the inbound direction.
                         ipFilterMask 1.3.6.1.4.1.326.2.1.8.3.1.1.1.2 ipaddress no-access
Indicates the mask to be logical-ANDed with the ipFilterIpAddress to find matching addresses. A mask of 0.0.0.0 is a wild card and matches all addresses. A valid mask is one which has contiguous higher order 1 bits set. That is, mask 255.255.0.128 is not valid while 255.255.0.0 is valid. Example matches: IpAddress Mask means 163.26.54.6 255.255.255.255 Allow address 163.26.54.6 163.54.7.21 255.255.0.0 Allow addresses 163.54.*.*
                         ipFilterRowStatus 1.3.6.1.4.1.326.2.1.8.3.1.1.1.3 rowstatus read-write
The status of this ipFilter entry.
                 ipFilterNoSSR 1.3.6.1.4.1.326.2.1.8.3.1.2 integer read-write
NoStrictSourceRoute Flag. On implies that IP packets with Strict Source Routed Option set will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements. Enumeration: 'disabled': 2, 'enabled': 1.
                 ipFilterNoLSR 1.3.6.1.4.1.326.2.1.8.3.1.3 integer read-write
NoLooseSourceRoute Flag. On implies that IP packets with Loose Source Routed Option set will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements. Enumeration: 'disabled': 2, 'enabled': 1.
                 ipFilterNoInBand 1.3.6.1.4.1.326.2.1.8.3.1.4 integer read-write
NoInBand Flag. On implies that ALL IP packets from the ATM network will be dropped. Off implies that these packets will be allowed to pass through, provided they meet with all the other requirements. Enumeration: 'disabled': 2, 'enabled': 1.
             ipFilterStatsGroup 1.3.6.1.4.1.326.2.1.8.3.2
                 ipFilterStatsIpHeader 1.3.6.1.4.1.326.2.1.8.3.2.1 ipheader read-only
The first 64 bytes of the IP packet which was last dropped.
                 ipFilterStatsTimeOccured 1.3.6.1.4.1.326.2.1.8.3.2.2 timeticks read-only
The sysUptime at which the last IP packet was dropped.
                 ipFilterStatsViolations 1.3.6.1.4.1.326.2.1.8.3.2.3 counter32 read-only
The number of IP packets dropped till the current time.
                 ipFilterStatsVPI 1.3.6.1.4.1.326.2.1.8.3.2.4 integer32 read-only
The Virtual Path Identifier corresponding to the connection on which the last IP packet was dropped.
                 ipFilterStatsVCI 1.3.6.1.4.1.326.2.1.8.3.2.5 integer32 read-only
The Virtual Channel Identifier corresponding to the connection on which the last IP packet was dropped.
                 ipFilterStatsIfName 1.3.6.1.4.1.326.2.1.8.3.2.6 displaystring read-only
Name of the interface on which the last dropped IP packet was received
                 ipFilterStatsReasonText 1.3.6.1.4.1.326.2.1.8.3.2.7 displaystring read-only
The reason for dropping the last IP packet to be dropped
                 ipFilterStatsSrcIpAddr 1.3.6.1.4.1.326.2.1.8.3.2.8 ipaddress read-only
The IP address contained in the source field of the header of the last IP packet to be dropped