FORCE10-COPY-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: FORCE10 NETWORKS


 Home MIB: FORCE10-COPY-CONFIG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, FORCE10-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f10CopyConfigMib 1.3.6.1.4.1.6027.3.5
Dell Networking OS Copy Config MIB provides copying of running-config to to startup-config and vice-versa, and Dell Networking OS files to local disk or other system via ftp or tftp.
     f10CopyConfigObjects 1.3.6.1.4.1.6027.3.5.1
         f10CopyConfig 1.3.6.1.4.1.6027.3.5.1.1
             f10CopyTable 1.3.6.1.4.1.6027.3.5.1.1.1 no-access
A table of config-copy requests.
                 f10CopyEntry 1.3.6.1.4.1.6027.3.5.1.1.1.1 no-access
A config-copy request. To use this copy on NMS, user must first query the MIB. if the query returns the result of the previous copied and there is no pending copy operation, user can submit a SNMP SET with a random number as index with the appropraite information as specified by this MIB and the row status as CreateAndGo. The system will only keep the last 5 copy requests as the history. If there are ten entries in the copy request table, the subsequent copy request will replace the existing one in the copy table. 1) To copy running-config from local directory to startup-config. Set the following mib objects in the copy table copySrcFileType : runningConfig (2) copyDestFileType : startupConfig (3) 2) To copy startup-config from local directory to a remote site. Set the following mib objects in the copy table copySrcFileType : startupConfig (3) copyDestFileType : ftosFile (1) copyDestFileLocation : ftp (4) copyDestFileName : /user/tester1/ftp/ copyServerAddress : 172.20.10.123 copyUserName : tester1 copyUserPassword : mypasswd 3) To copy a file from local directory to a remote site. Set the following mib objects in the copy table copySrcFileType : ftosFile (1) copySrcFileLocation : slot0 (2) copySrcFileName : NVTRACE_LOG_DIR/LP4-nvtrace-0 copyDestFileType : ftosFile (1) copyDestFileLocation : ftp (4) copyDestFileName : /usr/tester1/trace/backup/LP4-nvtrace-0 copyServerAddress : 172.20.10.123 copyUserName : tester1 copyUserPassword : mypasswd
                     copyConfigIndex 1.3.6.1.4.1.6027.3.5.1.1.1.1.1 integer no-access
To initiate a config copy request, user should assign a positive random value as an index.
                     copySrcFileType 1.3.6.1.4.1.6027.3.5.1.1.1.1.2 f10configfiletype read-write
Specifies the type of file to copy from. if the copySrcFileType is runningConfig(2) or startupConfig(3), the default F10ConfigFileLocation is flash(1). If the copySrcFileType has the value of ftosFile(1), it is expected that the copySrcFileLocation and copySrcFileName must also be spcified. The three objects together will uniquely identify the source file.
                     copySrcFileLocation 1.3.6.1.4.1.6027.3.5.1.1.1.1.3 f10configfilelocation read-write
Specifies the location of source file. If the copySrcFileType has the value of ftosFile(1), it is expected that the copySrcFileType and copySrcFileName must also be spcified. The three objects together will uniquely identify the source file. If the copySrcFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copySrcFileName 1.3.6.1.4.1.6027.3.5.1.1.1.1.4 displaystring read-write
The file name (including the path, if applicable) of the file. If copySourceFileType is set to runningConfig or startupConfig, copySrcFileName is not needed.
                     copyDestFileType 1.3.6.1.4.1.6027.3.5.1.1.1.1.5 f10configfiletype read-write
Specifies the type of file to copy to. if the copyDestFileType is runningConfig(2) or startupConfig(3), the default f10DestFileLocation is flash(1). If the copyDestFileType has the value of ftosFile(1), it is expected that the copyDestFileLocation and copyDestFileName must also be spcified. The three objects together will uniquely identify the destination file.
                     copyDestFileLocation 1.3.6.1.4.1.6027.3.5.1.1.1.1.6 f10configfilelocation read-write
Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the copyDestFileType and copyDestFileName must also be spcified. The three objects together will uniquely identify the destination file. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copyDestFileName 1.3.6.1.4.1.6027.3.5.1.1.1.1.7 displaystring read-write
Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the f10CopyDestFileTyp and copyDestFileLocation must also be spcified. The three objects together will uniquely identify the source file. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copyServerAddress 1.3.6.1.4.1.6027.3.5.1.1.1.1.8 ipaddress read-write
The ip address of the tftp server from (or to) which to copy the configuration file. Values of 0.0.0.0 or FF.FF.FF.FF for copyServerAddress are not allowed. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copyUserName 1.3.6.1.4.1.6027.3.5.1.1.1.1.9 displaystring read-write
Remote user name for copy via ftp, or scp. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copyUserPassword 1.3.6.1.4.1.6027.3.5.1.1.1.1.10 displaystring read-write
Password used by ftp, scp for copying a file to an ftp/scp server. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified.
                     copyState 1.3.6.1.4.1.6027.3.5.1.1.1.1.11 f10configcopystate read-only
The state of config-copy operation.
                     copyTimeStarted 1.3.6.1.4.1.6027.3.5.1.1.1.1.12 timeticks read-only
The timetick when the copy started.
                     copyTimeCompleted 1.3.6.1.4.1.6027.3.5.1.1.1.1.13 timeticks read-only
The timetick when the copy completed.
                     copyFailCause 1.3.6.1.4.1.6027.3.5.1.1.1.1.14 f10configcopyfailcause read-only
The reason a config-copy request failed.
                     copyEntryRowStatus 1.3.6.1.4.1.6027.3.5.1.1.1.1.15 rowstatus read-write
The state of the copy operation. Uses CreateAndGo when you are performing the copy. The state is set to active when the copy is completed.
                     copyServerInetAddressType 1.3.6.1.4.1.6027.3.5.1.1.1.1.16 inetaddresstype read-write
The address type of copyServerInetAddress. Only ipv4 (1), ipv6 (2) and dns (16) types are supported.
                     copyServerInetAddress 1.3.6.1.4.1.6027.3.5.1.1.1.1.17 inetaddress read-write
The IP address of the address ftp/tftp/scp server from or to which to copy the configuration file. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information copyUserName and copyUserPassword also be spcified.
         f10CopyConfigTraps 1.3.6.1.4.1.6027.3.5.1.2
             copyAlarmMibNotifications 1.3.6.1.4.1.6027.3.5.1.2.0
                 copyConfigCompleted 1.3.6.1.4.1.6027.3.5.1.2.0.1
The agent generate this trap when a copy operational is completed.
             copyAlarmVariable 1.3.6.1.4.1.6027.3.5.1.2.1
                 copyAlarmLevel 1.3.6.1.4.1.6027.3.5.1.2.1.1 integer no-access
the message warning level
                 copyAlarmString 1.3.6.1.4.1.6027.3.5.1.2.1.2 octet string no-access
An generic string value in the TRAP object
                 copyAlarmIndex 1.3.6.1.4.1.6027.3.5.1.2.1.3 integer no-access
the index of the current copy. Indicates the index of the current copy, i.e. copyConfigIndex of f10CopyTable. Set to '-1' if copy executed by CLI