FASTPATH-DHCPSERVER-PRIVATE-MIB: View SNMP OID List / Download MIB

VENDOR: DELL INC.


 Home MIB: FASTPATH-DHCPSERVER-PRIVATE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, BROADCOM-REF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathDHCPServerPrivate 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12
The Broadcom Private MIB for FASTPATH DHCP Server
       agentDhcpServerGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1
           agentDhcpServerAdminMode 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.1 integer read-write
Admin-mode of the DHCP Server. Enumeration: 'enable': 1, 'disable': 2.
           agentDhcpServerPingPktNos 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.2 integer read-write
The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
           agentDhcpServerAutomaticBindingsNos 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.3 counter32 read-only
The no. of IP addresses that have been assigned automatically.
           agentDhcpServerExpiredBindingsNos 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.4 counter32 read-only
The no. of expired leases.
           agentDhcpServerMalformedMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.5 counter32 read-only
The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
           agentDhcpServerDISCOVERMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.6 counter32 read-only
The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
           agentDhcpServerREQUESTMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.7 counter32 read-only
The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
           agentDhcpServerDECLINEMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.8 counter32 read-only
The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
           agentDhcpServerRELEASEMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.9 counter32 read-only
The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
           agentDhcpServerINFORMMessagesReceived 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.10 counter32 read-only
The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
           agentDhcpServerOFFERMessagesSent 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.11 counter32 read-only
The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
           agentDhcpServerACKMessagesSent 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.12 counter32 read-only
The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
           agentDhcpServerNAKMessagesSent 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.13 counter32 read-only
The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
           agentDhcpServerClearStatistics 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.14 integer read-write
Clears the DHCP server statistics. Enumeration: 'enable': 1, 'disable': 2.
           agentDhcpServerBootpAutomatic 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.15 integer read-write
Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools. Enumeration: 'enable': 1, 'disable': 2.
       agentDhcpServerPoolConfigGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2
           agentDhcpServerPoolNameCreate 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.1 displaystring read-write
A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
           agentDhcpServerPoolConfigTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2 no-access
A table of the DHCP Server Pool configuration entries.
               agentDhcpServerPoolConfigEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1 no-access
Represents entry for a Dhcp server pool.
                   agentDhcpServerPoolIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.1 unsigned32 read-only
The Pool Index, which 'll be used as index for the PoolConfig Table.
                   agentDhcpServerPoolName 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.2 displaystring read-only
The name of the DHCP Address pool. This value cannot be modified
                   agentDhcpServerPoolDefRouter 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.3 displaystring read-write
This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
                   agentDhcpServerPoolDNSServer 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.4 displaystring read-write
This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
                   agentDhcpServerPoolLeaseTime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.5 integer32 read-write
This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
                   agentDhcpServerPoolType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.6 integer read-only
This specifies the type of the binding that is associated with this pool. Enumeration: 'un-allocated': 0, 'dynamic': 1, 'manual': 2.
                   agentDhcpServerPoolNetbiosNameServer 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.7 displaystring read-write
This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
                   agentDhcpServerPoolNetbiosNodeType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.8 integer read-write
This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values. Enumeration: 'm-node': 4, 'none': 0, 'p-node': 2, 'b-node': 1, 'h-node': 8.
                   agentDhcpServerPoolNextServer 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.9 ipaddress read-write
This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
                   agentDhcpServerPoolDomainName 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.10 displaystring read-write
This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
                   agentDhcpServerPoolBootfile 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.11 displaystring read-write
This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
                   agentDhcpServerPoolRowStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.12 rowstatus read-write
The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.
           agentDhcpServerPoolAllocationTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3 no-access
A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
               agentDhcpServerPoolAllocationEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1 no-access
Represents entry for a Dhcp server's allocation pool.
                   agentDhcpServerPoolAllocationName 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.1 displaystring read-only
This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
                   agentDhcpServerDynamicPoolIpAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.2 ipaddress read-write
The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
                   agentDhcpServerDynamicPoolIpMask 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.3 ipaddress read-write
The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
                   agentDhcpServerDynamicPoolIpPrefixLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.4 unsigned32 read-write
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
                   agentDhcpServerPoolAllocationType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.5 integer read-only
This specifies the type of the binding that is associated with this pool. Enumeration: 'un-allocated': 0, 'dynamic': 1, 'manual': 2.
                   agentDhcpServerManualPoolClientIdentifier 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.6 displaystring read-write
It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
                   agentDhcpServerManualPoolClientName 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.7 displaystring read-write
It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
                   agentDhcpServerManualPoolClientHWAddr 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.8 displaystring read-write
It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
                   agentDhcpServerManualPoolClientHWType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.9 integer read-write
It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured. Enumeration: 'ethernet': 1, 'ieee802': 6.
                   agentDhcpServerManualPoolIpAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.10 ipaddress read-write
The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
                   agentDhcpServerManualPoolIpMask 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.11 ipaddress read-write
The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
                   agentDhcpServerManualPoolIpPrefixLength 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.12 unsigned32 read-write
This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
           agentDhcpServerExcludedAddressRangeCreate 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.4 displaystring read-write
It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
           agentDhcpServerExcludedAddressRangeTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5 no-access
A table of the DHCP Server Pool configuration entries.
               agentDhcpServerExcludedAddressRangeEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1 no-access
Represents entry for a Dhcp server excluded address range table.
                   agentDhcpServerExcludedRangeIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.1 unsigned32 read-only
This specifies the index of the excluded IP address-range table.
                   agentDhcpServerExcludedStartIpAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.2 ipaddress read-only
This specifies the starting IP address of the excluded address-range.
                   agentDhcpServerExcludedEndIpAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.3 ipaddress read-only
This specifies the ending IP address of the excluded address-range.
                   agentDhcpServerExcludedAddressRangeStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4 rowstatus read-write
This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
           agentDhcpServerPoolOptionCreate 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.6 displaystring read-write
This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code.
           agentDhcpServerPoolOptionTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7 no-access
A table for configuring DHCP Server options.
               agentDhcpServerPoolOptionEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1 no-access
Represents entry for a Dhcp server option table.
                   agentDhcpServerPoolOptionIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.1 unsigned32 read-only
The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
                   agentDhcpServerPoolOptionCode 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.2 unsigned32 read-write
This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table.
                   agentDhcpServerOptionPoolName 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.3 displaystring read-only
The name of the DHCP Address pool. This value cannot be modified
                   agentDhcpServerPoolOptionAsciiData 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.4 displaystring read-write
This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data.
                   agentDhcpServerPoolOptionHexData 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.5 displaystring read-write
This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data.
                   agentDhcpServerPoolOptionIpAddressData 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.6 displaystring read-write
This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8.
                   agentDhcpServerPoolOptionStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.7 rowstatus read-write
This specifies the row-status of the DHCP Server Pool option.
       agentDhcpServerLeaseGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3
           agentDhcpServerLeaseClearAllBindings 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.1 integer read-write
Clears All the DHCP server bindings. Enumeration: 'enable': 1, 'disable': 2.
           agentDhcpServerLeaseTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2 no-access
A table of the DHCP Server's Lease entries.
               agentDhcpServerLeaseEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1 no-access
Represents entry for a Dhcp server's leases.
                   agentDhcpServerLeaseIPAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.1 ipaddress read-only
This specifies the IP address leased to the client.
                   agentDhcpServerLeaseIPMask 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.2 ipaddress read-only
This specifies the IP mask of the address leased to the client.
                   agentDhcpServerLeaseHWAddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.3 macaddress read-only
This specifies the hardware address of the client.
                   agentDhcpServerLeaseRemainingTime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.4 timeticks read-only
This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
                   agentDhcpServerLeaseType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.5 integer read-only
This specifies the type of address lease as Automatic or Manual. Enumeration: 'manual': 2, 'automatic': 1.
                   agentDhcpServerLeaseStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.6 rowstatus read-write
This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
       agentDhcpServerAddressConflictGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4
           agentDhcpServerClearAllAddressConflicts 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.1 integer read-write
Clears all the address-conflicts found by DHCP server,when set to enable. Enumeration: 'enable': 1, 'disable': 2.
           agentDhcpServerAddressConflictLogging 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.2 integer read-write
It is used to enable, or disables the logging of address-conflicts on a DHCP Server. Enumeration: 'enable': 1, 'disable': 2.
           agentDhcpServerAddressConflictTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3 no-access
A table of the conflicting-address entries.
               agentDhcpServerAddressConflictEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1 no-access
Represents a conflicting-address entry.
                   agentDhcpServerAddressConflictIP 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.1 ipaddress read-only
This specifies the conflicting IP address assigned to the client by DHCP server.
                   agentDhcpServerAddressConflictDetectionType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.2 integer read-only
This specifies the address-conflict detection-method. Enumeration: 'ping': 1, 'gratuitousArp': 2.
                   agentDhcpServerAddressConflictDetectionTime 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.3 timeticks read-only
This specifies the sysUpTime at which the address-conflict was detected.
                   agentDhcpServerAddressConflictStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.4 rowstatus read-write
This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.