FA-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: BROCADE


 Home MIB: FA-EXT-MIB
Download as:   
SNMPv2-CONF, SW-MIB, SNMPv2-SMI, FCMGMT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 faExt 1.3.6.1.4.1.1588.2.1.1.1.28
The MIB module is Extension for FA-MIB. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.
       swSfpStatTable 1.3.6.1.4.1.1588.2.1.1.1.28.1 no-access
This represents the diagnostic stats of SFPs.
           swSfpStatEntry 1.3.6.1.4.1.1588.2.1.1.1.28.1.1 no-access
This represents the diagnostic stats of SFPs
               swSfpTemperature 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.1 octet string read-only
This object identifies the temperature of SFP
               swSfpVoltage 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.2 octet string read-only
This object identifies the voltage of SFP.
               swSfpCurrent 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.3 octet string read-only
This object identifies the current of SFP.
               swSfpRxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.4 octet string read-only
This object identifies the Rx power consumption of SFP.
               swSfpTxPower 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.5 octet string read-only
This object identifies the Tx power consumption of SFP.
               swSfpPoweronHrs 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.6 integer32 read-only
This object identifies the power on hours of SFP. This is applicable only to 16G SFPs.
               swSfpUnitId 1.3.6.1.4.1.1588.2.1.1.1.28.1.1.7 integer32 read-only
This object identifies unit ID of SFP. This is applicable only to QSFP.
       swFapwwnFeature 1.3.6.1.4.1.1588.2.1.1.1.28.2
The OID sub-tree for Fapwwn feature. Using this feature user can configure virtual port WWN for a port.
           swPortFapwwnConfigTable 1.3.6.1.4.1.1588.2.1.1.1.28.2.1 no-access
This represents the configuration of ports.
               swPortFapwwnConfigEntry 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1 no-access
This represents the configuration of ports.
                   swPortFapwwnConfigEnable 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.1 truthvalue read-only
Represents the Fapwwn status. This is for per port.
                   swPortFapwwnConfigFapwwn 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.2 displaystring read-only
Represents the Fapwwn. For AG it is range of WWNs. If Fapwwn feature is not enabled in a port this object value is NA(Not Applicable.
                   swPortFapwwnConfigType 1.3.6.1.4.1.1588.2.1.1.1.28.2.1.1.3 fapwwntype read-only
Represents the Fapwwn type.
       swPortConfigTable 1.3.6.1.4.1.1588.2.1.1.1.28.3 no-access
This represents the configuration of encryption / compression feature on a port
           swPortConfigEntry 1.3.6.1.4.1.1588.2.1.1.1.28.3.1 no-access
This represents the configuration of encryption / compression feature on a port
               swPortEncrypt 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.1 encryptcompressstatus read-only
Represents the encryption status on a port.
               swPortCompression 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.2 encryptcompressstatus read-only
Represents the compression status on port.
               swPortCipherKeySize 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.3 integer32 read-only
Represents the Cipher key size. FOS supports 256 bytes key
               swPortCipherMode 1.3.6.1.4.1.1588.2.1.1.1.28.3.1.4 cipermode read-only
Represents the Cipher mode.
       swConnUnitPortTable 1.3.6.1.4.1.1588.2.1.1.1.28.4 no-access
This represents the Conn unit Port entry
           swConnUnitPortEntry 1.3.6.1.4.1.1588.2.1.1.1.28.4.1 no-access
This represents the Conn unit Port Entry
               swConnUnitPortCapableSpeeds 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.1 octet string read-only
This represents the available speeds, that a port is capable of configuring
               swConnUnitPortSpeedMode 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.2 integer read-only
This represents the type of speed modes that can be configured for the particular port. The modes that can be configured are auto-negotiable and static speeds. Enumeration: 'auto-neg': 1, 'static': 2.
               swConnUnitPortFECMode 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.3 integer read-only
This represents the port Forward Error Correction Mode. FEC feature is only applicable to 10G/16G platforms. Enumeration: 'disabled': 2, 'unknown': 1, 'notsupported': 4, 'enabled': 3.
               swConnUnitPortFECState 1.3.6.1.4.1.1588.2.1.1.1.28.4.1.4 integer read-only
This represents FEC state of a port.If in link both sfp connected are of brocade vendor type then state is active, else it will be inactive. Enumeration: 'active': 1, 'unknown': 0, 'inactive': 2, 'notsupported': 3.