F3-JDSU-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: F3-JDSU-MIB
Download as:   
SNMPv2-CONF, CM-FACILITY-MIB, SNMPv2-SMI, CM-COMMON-MIB, CM-ENTITY-MIB, ADVA-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f3JdsuMIB 1.3.6.1.4.1.2544.1.12.31
This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
       f3JdsuObjects 1.3.6.1.4.1.2544.1.12.31.1
           f3JdsuGeneratorPort 1.3.6.1.4.1.2544.1.12.31.1.1 variablepointer read-write
This object describes the port which will raise a JDSU discovery.
           f3JdsuGeneratorOuterVlanEnabled 1.3.6.1.4.1.2544.1.12.31.1.2 truthvalue read-write
This object describes whether the filter's Outer Vlan enabled.
           f3JdsuGeneratorOuterVlanId 1.3.6.1.4.1.2544.1.12.31.1.3 vlanid read-write
This object describes the filter's Outer VlanId.
           f3JdsuGeneratorOuterVlanPri 1.3.6.1.4.1.2544.1.12.31.1.4 vlanpriority read-write
This object describes the filter's Outer Vlan Priority.
           f3JdsuGeneratorOuterVlanEtherType 1.3.6.1.4.1.2544.1.12.31.1.5 unsigned32 read-write
This object describes the filter's Outer Vlan Ether Type.
           f3JdsuGeneratorInnerVlan1Enabled 1.3.6.1.4.1.2544.1.12.31.1.6 truthvalue read-write
This object describes whether the filter's Inner Vlan1 enabled.
           f3JdsuGeneratorInnerVlan1Id 1.3.6.1.4.1.2544.1.12.31.1.7 vlanid read-write
This object describes the filter's Inner Vlan1 ID.
           f3JdsuGeneratorInnerVlan1Pri 1.3.6.1.4.1.2544.1.12.31.1.8 vlanpriority read-write
This object describes the filter's Inner Vlan1 Priority.
           f3JdsuGeneratorInnerVlan1EtherType 1.3.6.1.4.1.2544.1.12.31.1.9 unsigned32 read-write
This object describes the filter's Inner Vlan1 Ether Type.
           f3JdsuGeneratorInnerVlan2Enabled 1.3.6.1.4.1.2544.1.12.31.1.10 truthvalue read-write
This object describes whether the filter's Inner Vlan2 enabled.
           f3JdsuGeneratorInnerVlan2Id 1.3.6.1.4.1.2544.1.12.31.1.11 vlanid read-write
This object describes the filter's Inner Vlan2 ID.
           f3JdsuGeneratorInnerVlan2Pri 1.3.6.1.4.1.2544.1.12.31.1.12 vlanpriority read-write
This object describes the filter's Inner Vlan2 Priority.
           f3JdsuGeneratorInnerVlan2EtherType 1.3.6.1.4.1.2544.1.12.31.1.13 unsigned32 read-write
This object describes the filter's Inner Vlan2 Ether Type.
           f3JdsuGeneratorFrameType 1.3.6.1.4.1.2544.1.12.31.1.14 jdsugeneratorframetype read-write
This object describe the filter's frame type. Its default value is 802.3.
           f3JdsuGeneratorPayloadType 1.3.6.1.4.1.2544.1.12.31.1.15 jdsugeneratorpayloadtype read-write
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
           f3JdsuGeneratorFrameLength 1.3.6.1.4.1.2544.1.12.31.1.16 integer32 read-write
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
           f3JdsuGeneratorDiscoveryAction 1.3.6.1.4.1.2544.1.12.31.1.17 discoveryaction read-write
Indicates the discovery action on the JDSU generator.
           f3JdsuGeneratorDiscoverTable 1.3.6.1.4.1.2544.1.12.31.1.18 no-access
A list of entries corresponding to JDSU Generator Discover Information.
                 f3JdsuGeneratorDiscoverEntry 1.3.6.1.4.1.2544.1.12.31.1.18.1 no-access
A conceptual row in the f3JdsuGeneratorDiscoverTable.
                     f3JdsuGeneratorDiscoverDestMacAddr 1.3.6.1.4.1.2544.1.12.31.1.18.1.1 macaddress no-access
This object describes the destination MAC address for the test frames.
                     f3JdsuGeneratorDiscoverOuterVlanEnabled 1.3.6.1.4.1.2544.1.12.31.1.18.1.2 truthvalue read-only
This object describes whether the filter's Outer Vlan enabled.
                     f3JdsuGeneratorDiscoverOuterVlanId 1.3.6.1.4.1.2544.1.12.31.1.18.1.3 vlanid read-only
This object describes the filter's Outer Vlan ID.
                     f3JdsuGeneratorDiscoverOuterVlanPri 1.3.6.1.4.1.2544.1.12.31.1.18.1.4 vlanpriority read-only
This object describes the filter's Outer Vlan Priority.
                     f3JdsuGeneratorDiscoverOuterVlanEtherType 1.3.6.1.4.1.2544.1.12.31.1.18.1.5 integer32 read-only
This object describe the filter's Outer Vlan Ether Type.
                     f3JdsuGeneratorDiscoverInnerVlan1Enabled 1.3.6.1.4.1.2544.1.12.31.1.18.1.6 truthvalue read-only
This object describes whether the filter's Inner Vlan1 enabled.
                     f3JdsuGeneratorDiscoverInnerVlan1Id 1.3.6.1.4.1.2544.1.12.31.1.18.1.7 vlanid read-only
This object describe the filter's Inner Vlan1 ID.
                     f3JdsuGeneratorDiscoverInnerVlan1Pri 1.3.6.1.4.1.2544.1.12.31.1.18.1.8 vlanpriority read-only
This object describes the filter's Inner Vlan1 Priority.
                     f3JdsuGeneratorDiscoverInnerVlan1EtherType 1.3.6.1.4.1.2544.1.12.31.1.18.1.9 integer32 read-only
This object describes the filter's Inner Vlan1 Ether Type.
                     f3JdsuGeneratorDiscoverInnerVlan2Enabled 1.3.6.1.4.1.2544.1.12.31.1.18.1.10 truthvalue read-only
This object describes whether the filter's Inner Vlan2 enabled.
                     f3JdsuGeneratorDiscoverInnerVlan2Id 1.3.6.1.4.1.2544.1.12.31.1.18.1.11 vlanid read-only
This object describes the filter's Inner Vlan2 ID.
                     f3JdsuGeneratorDiscoverInnerVlan2Pri 1.3.6.1.4.1.2544.1.12.31.1.18.1.12 vlanpriority read-only
This object describes the filter's Inner Vlan2 Priority.
                     f3JdsuGeneratorDiscoverInnerVlan2EtherType 1.3.6.1.4.1.2544.1.12.31.1.18.1.13 integer32 read-only
This object describes the filter's Inner Vlan2 Ether Type.
                     f3JdsuGeneratorDiscoverFrameType 1.3.6.1.4.1.2544.1.12.31.1.18.1.14 jdsugeneratorframetype read-only
This object describes the filter's frame type. Its default value is 802.3.
                     f3JdsuGeneratorDiscoverPayloadType 1.3.6.1.4.1.2544.1.12.31.1.18.1.15 jdsugeneratorpayloadtype read-only
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
                     f3JdsuGeneratorDiscoverFrameLength 1.3.6.1.4.1.2544.1.12.31.1.18.1.16 integer32 read-write
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
                     f3JdsuGeneratorDiscoverUnitTextId 1.3.6.1.4.1.2544.1.12.31.1.18.1.17 displaystring read-only
Indicates the string from remote device. Normally it is system name of remote device.
                     f3JdsuGeneratorDiscoverIfReachable 1.3.6.1.4.1.2544.1.12.31.1.18.1.18 truthvalue read-only
Indicate whether the mac can be discovered or not exactly.
                     f3JdsuGeneratorDiscoverGeneratorStatus 1.3.6.1.4.1.2544.1.12.31.1.18.1.19 generatorstatus read-only
Indicates the generator status.
                     f3JdsuGeneratorDiscoverItemOperation 1.3.6.1.4.1.2544.1.12.31.1.18.1.20 itemoperation read-write
action save the discoverd items.
                     f3JdsuGeneratorDiscoverItemIfSaved 1.3.6.1.4.1.2544.1.12.31.1.18.1.21 truthvalue read-only
Indicates whether the discoverd item saved status.
                     f3JdsuGeneratorDiscoverGeneratorAction 1.3.6.1.4.1.2544.1.12.31.1.18.1.22 generatoraction read-write
Indicates looup or lookdown action.
           f3JdsuGeneratorConfigureTable 1.3.6.1.4.1.2544.1.12.31.1.19 no-access
A list of entries corresponding to JDSU Generator Configure Information.
                 f3JdsuGeneratorConfigureEntry 1.3.6.1.4.1.2544.1.12.31.1.19.1 no-access
A conceptual row in the f3JdsuGeneratorConfigureTable.
                     f3JdsuGeneratorConfigureDestMacAddr 1.3.6.1.4.1.2544.1.12.31.1.19.1.1 macaddress no-access
This object describes the destination MAC address for the test frames.
                     f3JdsuGeneratorConfigureOuterVlanEnabled 1.3.6.1.4.1.2544.1.12.31.1.19.1.2 truthvalue read-only
This object describes whether the filter's Outer Vlan enabled.
                     f3JdsuGeneratorConfigureOuterVlanId 1.3.6.1.4.1.2544.1.12.31.1.19.1.3 vlanid read-only
This object describes the filter's Outer Vlan ID.
                     f3JdsuGeneratorConfigureOuterVlanPri 1.3.6.1.4.1.2544.1.12.31.1.19.1.4 vlanpriority read-only
This object describes the filter's Outer Vlan Priority.
                     f3JdsuGeneratorConfigureOuterVlanEtherType 1.3.6.1.4.1.2544.1.12.31.1.19.1.5 integer32 read-only
This object describes the filter's Outer Vlan Ether Type.
                     f3JdsuGeneratorConfigureInnerVlan1Enabled 1.3.6.1.4.1.2544.1.12.31.1.19.1.6 truthvalue read-only
This object describes whether the filter's Inner Vlan1 enabled.
                     f3JdsuGeneratorConfigureInnerVlan1Id 1.3.6.1.4.1.2544.1.12.31.1.19.1.7 vlanid read-only
This object describes the filter's Inner Vlan1 ID.
                     f3JdsuGeneratorConfigureInnerVlan1Pri 1.3.6.1.4.1.2544.1.12.31.1.19.1.8 vlanpriority read-only
This object describes the filter's Inner Vlan1 Priority.
                     f3JdsuGeneratorConfigureInnerVlan1EtherType 1.3.6.1.4.1.2544.1.12.31.1.19.1.9 integer32 read-only
This object describes the filter's Inner Vlan1 Ether Type.
                     f3JdsuGeneratorConfigureInnerVlan2Enabled 1.3.6.1.4.1.2544.1.12.31.1.19.1.10 truthvalue read-only
This object describes whether the filter's Inner Vlan2 enabled.
                     f3JdsuGeneratorConfigureInnerVlan2Id 1.3.6.1.4.1.2544.1.12.31.1.19.1.11 vlanid read-only
This object describes the filter's Inner Vlan2 ID.
                     f3JdsuGeneratorConfigureInnerVlan2Pri 1.3.6.1.4.1.2544.1.12.31.1.19.1.12 vlanpriority read-only
This object describes the filter's Inner Vlan2 Priority.
                     f3JdsuGeneratorConfigureInnerVlan2EtherType 1.3.6.1.4.1.2544.1.12.31.1.19.1.13 integer32 read-only
This object describes the filter's Inner Vlan2 Ether Type.
                     f3JdsuGeneratorConfigureFrameType 1.3.6.1.4.1.2544.1.12.31.1.19.1.14 jdsugeneratorframetype read-only
This object describes the filter's frame type. Its default value is 802.3.
                     f3JdsuGeneratorConfigurePayloadType 1.3.6.1.4.1.2544.1.12.31.1.19.1.15 jdsugeneratorpayloadtype read-only
Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags).
                     f3JdsuGeneratorConfigureFrameLength 1.3.6.1.4.1.2544.1.12.31.1.19.1.16 integer32 read-write
Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600.
                     f3JdsuGeneratorConfigureUnitTextId 1.3.6.1.4.1.2544.1.12.31.1.19.1.17 displaystring read-only
Indicates the string from remote device. Normally it is system name of remote device.
                     f3JdsuGeneratorConfigureIfReachable 1.3.6.1.4.1.2544.1.12.31.1.19.1.18 truthvalue read-only
Indicates whether the mac can be Configureed or not exactly.
                     f3JdsuGeneratorConfigureReachableUpdate 1.3.6.1.4.1.2544.1.12.31.1.19.1.19 updatereachstatus read-write
Action on update the reachable status of the related item.
                     f3JdsuGeneratorConfigureStatus 1.3.6.1.4.1.2544.1.12.31.1.19.1.20 generatorstatus read-only
Indicates the generator status exactly.
                     f3JdsuGeneratorConfigureGeneratorAction 1.3.6.1.4.1.2544.1.12.31.1.19.1.21 generatoraction read-write
Indicates JDSU Generator lookup or lookdown action.
                     f3JdsuGeneratorConfigureStorageType 1.3.6.1.4.1.2544.1.12.31.1.19.1.22 storagetype read-only
The type of storage configured for this entry.
                     f3JdsuGeneratorConfigureRowStatus 1.3.6.1.4.1.2544.1.12.31.1.19.1.23 rowstatus read-only
The status of this row. Note: one row can be deleted by set this item as destoryed.
           f3EthernetTrafficPortJdsuExtTable 1.3.6.1.4.1.2544.1.12.31.1.20 no-access
A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes.
                 f3EthernetTrafficPortJdsuExtEntry 1.3.6.1.4.1.2544.1.12.31.1.20.1 no-access
A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
                     f3EthernetTrafficPortJdsuLoopbackEnabled 1.3.6.1.4.1.2544.1.12.31.1.20.1.1 truthvalue read-write
Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state. When JDSU Generation Enabled, this attribute can't be enabled.
                     f3EthernetTrafficPortJdsuGenerationEanbled 1.3.6.1.4.1.2544.1.12.31.1.20.1.2 truthvalue read-write
This object describes whether the user would to raise a JDSU discovery action. When JDSU Loopback Enabled, this attribute cann't be enabled.
                     f3EthernetTrafficPortJdsuLoopbackVlanList 1.3.6.1.4.1.2544.1.12.31.1.20.1.3 displaystring read-only
In EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported. The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*').
       f3JdsuNotifications 1.3.6.1.4.1.2544.1.12.31.2
       f3JdsuConformance 1.3.6.1.4.1.2544.1.12.31.3
           f3JdsuCompliances 1.3.6.1.4.1.2544.1.12.31.3.1
               f3JdsuCompliance 1.3.6.1.4.1.2544.1.12.31.3.1.1
Describes the requirements for conformance to the f3 jdsu group.
           f3JdsuGroups 1.3.6.1.4.1.2544.1.12.31.3.2
               f3JdsuGroup 1.3.6.1.4.1.2544.1.12.31.3.2.1
A collection of objects used to manage the JDSU functionality.