EtherWAN-sw72000: View SNMP OID List / Download MIB
VENDOR: ETHERWAN SYSTEMS
Home | MIB: EtherWAN-sw72000 | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
etherwan | 1.3.6.1.4.1.2736 | |||
lanSwitch | 1.3.6.1.4.1.2736.1 |
The Switch MIB module for managing EtherWAN Swtich private MIBs |
||
sw72000 | 1.3.6.1.4.1.2736.1.1 | |||
ewnSystem | 1.3.6.1.4.1.2736.1.1.1 | |||
ewnSystemFirmwareRev | 1.3.6.1.4.1.2736.1.1.1.1 | displaystring | read-only |
Firmware Revision |
ewnSystemConfigOperation | 1.3.6.1.4.1.2736.1.1.1.2 | integer | read-write |
System Configuration operations. This is a write-only variable. On read, it will always return none(0). On loadDefault(1) write, it will restore to default and reboot the system. Enumeration: 'loadDefault': 1, 'none': 0, 'saveCurrent': 2. |
ewnSystemReboot | 1.3.6.1.4.1.2736.1.1.1.3 | integer | read-write |
System Warm Reboot Functionality Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSystemRebootRequired | 1.3.6.1.4.1.2736.1.1.1.4 | integer | read-only |
System Warm Reboot Functionality Enumeration: 'rebootRequired': 1, 'rebootNotRequired': 0. |
ewnSystemTFTP | 1.3.6.1.4.1.2736.1.1.1.5 | |||
ewnSystemTFTPFilename | 1.3.6.1.4.1.2736.1.1.1.5.1 | displaystring | read-write |
Filename for TFTP download |
ewnSystemTFTPIpAddress | 1.3.6.1.4.1.2736.1.1.1.5.2 | ipaddress | read-write |
IPAddress of TFTP server |
ewnSystemTFTPAction | 1.3.6.1.4.1.2736.1.1.1.5.3 | integer | read-write |
Action of the current TFTP session Enumeration: 'installConfiguration': 1, 'backupConfiguration': 2. |
ewnSystemTFTPState | 1.3.6.1.4.1.2736.1.1.1.5.4 | integer | read-write |
State of the current TFTP session Enumeration: 'start': 1, 'none': 0, 'done': 3, 'inProgress': 2, 'error': 4. |
ewnSystemProductModel | 1.3.6.1.4.1.2736.1.1.1.6 | displaystring | read-only |
Product Model Number |
ewnSystemHardwareRev | 1.3.6.1.4.1.2736.1.1.1.7 | displaystring | read-only |
Hardware Revision |
ewnSystemGatewayIpAddress | 1.3.6.1.4.1.2736.1.1.1.8 | ipaddress | read-write |
Default Gateway IP Address for this device |
ewnSystemMacAddr | 1.3.6.1.4.1.2736.1.1.1.9 | octet string | read-only |
MAC Address of the switch. |
ewnSystemPassword | 1.3.6.1.4.1.2736.1.1.1.10 | displaystring | read-write |
Login password |
ewnSystemPasswordEncrypted | 1.3.6.1.4.1.2736.1.1.1.11 | displaystring | read-write |
Login password with encryption |
ewnSystemAutoSaveState | 1.3.6.1.4.1.2736.1.1.1.12 | integer | read-write |
Auto save system configuration Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSystemAutoSaveDelay | 1.3.6.1.4.1.2736.1.1.1.13 | integer | read-write |
Delay time in seconds for auto save system configuration |
ewnPort | 1.3.6.1.4.1.2736.1.1.2 | |||
ewnPortCount | 1.3.6.1.4.1.2736.1.1.2.1 | integer | read-only |
Port count |
ewnPortTable | 1.3.6.1.4.1.2736.1.1.2.2 | no-access |
Port table |
|
1.3.6.1.4.1.2736.1.1.2.2.1 | no-access |
Port entry |
||
ewnPortNo | 1.3.6.1.4.1.2736.1.1.2.2.1.1 | integer | read-only |
Port Number |
ewnPortString | 1.3.6.1.4.1.2736.1.1.2.2.1.2 | displaystring | read-only |
Port String |
ewnPortHardwareType | 1.3.6.1.4.1.2736.1.1.2.2.1.3 | integer | read-only |
Port hardware type Enumeration: 'type1GFx': 5, 'type100M': 2, 'type1G': 4, 'typeUnknown': 7, 'type100MFX': 6, 'type10M': 1, 'typeMII': 3. |
ewnPortLinkStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.4 | integer | read-only |
Port Link Status Enumeration: 'down': 0, 'up': 1. |
ewnPortLinkConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.5 | integer | read-write |
Port Administrative Link Status identical to ifAdminStatus Enumeration: 'down': 0, 'up': 1. |
ewnPortSpeedStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.6 | integer | read-only |
Port Speed Status Enumeration: 'speed100M': 1, 'speed1G': 2, 'speed10M': 0. |
ewnPortSpeedConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.7 | integer | read-write |
Port Speed Configuration Enumeration: 'speedAuto': 3, 'speed100M': 1, 'speed1G': 2, 'speed10M': 0. |
ewnPortDupStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.8 | integer | read-only |
Port Duplexity Status Enumeration: 'auto': 2, 'full': 1, 'half': 0. |
ewnPortDupConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.9 | integer | read-write |
Port Duplexity Configuration Enumeration: 'auto': 2, 'full': 1, 'half': 0. |
ewnPortFlowStatus | 1.3.6.1.4.1.2736.1.1.2.2.1.10 | integer | read-only |
Port Flow Control Status Enumeration: 'txRxOn': 1, 'off': 0, 'txOnOnly': 2, 'rxOnOnly': 3. |
ewnPortFlowConfig | 1.3.6.1.4.1.2736.1.1.2.2.1.11 | integer | read-write |
Port Flow Control Configuration Enumeration: 'disabled': 0, 'enabled': 1. |
ewnPortBroadcastLimit | 1.3.6.1.4.1.2736.1.1.2.2.1.13 | integer | read-write |
Switch Broadcast rate limit type. Enumeration: 'enable': 1, 'disable': 0. |
ewnPortDlfMulticastLimit | 1.3.6.1.4.1.2736.1.1.2.2.1.15 | integer | read-write |
Switch DLF and Multicast rate limit type. Enumeration: 'enable': 1, 'disable': 0. |
ewnPortLimitLevel | 1.3.6.1.4.1.2736.1.1.2.2.1.16 | integer | read-write |
Switch rate limit level. |
ewnPortPriority | 1.3.6.1.4.1.2736.1.1.2.2.1.17 | integer | read-write |
Default priority for untagged frames received by this port |
ewnPortSwitchMode | 1.3.6.1.4.1.2736.1.1.2.2.1.18 | integer | read-write |
VLAN switch port mode. Enumeration: 'max-ACCESS': 1, 'hybrid': 2, 'trunk': 3, 'normal': 0. |
ewnPortPVID | 1.3.6.1.4.1.2736.1.1.2.2.1.19 | integer | read-write |
Port VLAN ID (1..4094). |
ewnPortResetRMONCount | 1.3.6.1.4.1.2736.1.1.2.2.1.20 | integer | read-write |
reset RMON counters on this port. Enumeration: 'disabled': 0, 'enabled': 1. |
ewnPortAliasName | 1.3.6.1.4.1.2736.1.1.2.2.1.21 | displaystring | read-write |
Port alias name |
ewnMirror | 1.3.6.1.4.1.2736.1.1.3 | |||
ewnMirrorAvailablePortMap | 1.3.6.1.4.1.2736.1.1.3.1 | octet string | read-only |
Available mirror port map |
ewnMirrorCount | 1.3.6.1.4.1.2736.1.1.3.2 | integer | read-only |
Available mirror entry count |
ewnMirrorTable | 1.3.6.1.4.1.2736.1.1.3.3 | no-access |
Port Mirroring table |
|
1.3.6.1.4.1.2736.1.1.3.3.1 | no-access |
Mirror Entry |
||
ewnMirrorIndex | 1.3.6.1.4.1.2736.1.1.3.3.1.1 | integer | read-only |
Mirror index |
ewnMirrorToPort | 1.3.6.1.4.1.2736.1.1.3.3.1.2 | integer | read-write |
Mirror to port |
ewnMirrorFromPortMap | 1.3.6.1.4.1.2736.1.1.3.3.1.3 | octet string | read-write |
Mirror from port map |
ewnMirrorMode | 1.3.6.1.4.1.2736.1.1.3.3.1.4 | integer | read-write |
Mirror mode Enumeration: 'receive': 1, 'transmit': 2, 'receiveandtransmit': 3. |
ewnTrunk | 1.3.6.1.4.1.2736.1.1.4 | |||
ewnTrunkCount | 1.3.6.1.4.1.2736.1.1.4.1 | integer | read-only |
Trunk count |
ewnTrunkTable | 1.3.6.1.4.1.2736.1.1.4.2 | no-access |
Port Trunking table |
|
1.3.6.1.4.1.2736.1.1.4.2.1 | no-access |
Trunk Entry |
||
ewnTrunkIndex | 1.3.6.1.4.1.2736.1.1.4.2.1.1 | integer | read-only |
Trunk index |
ewnTrunkPortMap | 1.3.6.1.4.1.2736.1.1.4.2.1.2 | octet string | read-write |
Trunk port map |
ewnTrunkAvailPortMap | 1.3.6.1.4.1.2736.1.1.4.2.1.3 | octet string | read-only |
Available trunk port map |
ewnTrunkMaxNumOfPorts | 1.3.6.1.4.1.2736.1.1.4.2.1.4 | integer | read-only |
Maximum number of ports per trunk group. |
ewnLACP | 1.3.6.1.4.1.2736.1.1.5 | |||
ewnLACP1 | 1.3.6.1.4.1.2736.1.1.5.1 | |||
ewnLACPSYSPriority | 1.3.6.1.4.1.2736.1.1.5.1.1 | integer | read-write |
LACP SYSTEM Priority |
ewnLACPTable | 1.3.6.1.4.1.2736.1.1.5.1.2 | no-access |
LACP table |
|
1.3.6.1.4.1.2736.1.1.5.1.2.1 | no-access |
LACP CONF ENTRY |
||
ewnLACPPortIndex | 1.3.6.1.4.1.2736.1.1.5.1.2.1.1 | integer | read-only |
LACP Index |
ewnLACPPortName | 1.3.6.1.4.1.2736.1.1.5.1.2.1.2 | displaystring | read-only |
LACP Port String |
ewnLACPTimeout | 1.3.6.1.4.1.2736.1.1.5.1.2.1.3 | integer | read-write |
LACP Port Timeout Enumeration: 'short': 0, 'disable': 2, 'long': 1. |
ewnLACPPriority | 1.3.6.1.4.1.2736.1.1.5.1.2.1.4 | integer | read-write |
LACP Port Priority |
ewnLACP2 | 1.3.6.1.4.1.2736.1.1.5.2 | |||
ewnLACPPortTable | 1.3.6.1.4.1.2736.1.1.5.2.1 | no-access |
Port LACP table |
|
1.3.6.1.4.1.2736.1.1.5.2.1.1 | no-access |
LACP Entry |
||
ewnLACPIndex | 1.3.6.1.4.1.2736.1.1.5.2.1.1.1 | integer | read-only |
LACP Index |
ewnLACPPortString | 1.3.6.1.4.1.2736.1.1.5.2.1.1.2 | displaystring | read-only |
LACP Port String |
ewnLACPAdminKey | 1.3.6.1.4.1.2736.1.1.5.2.1.1.3 | integer | read-write |
LACP Admin Key Enumeration: 'statictrunk': 4, 'disable': 0, 'group1': 1, 'group3': 3, 'group2': 2. |
ewnLACPPortMode | 1.3.6.1.4.1.2736.1.1.5.2.1.1.4 | integer | read-only |
LACP Port Mode Enumeration: 'passive': 0, 'active': 1, 'notAvailable': 2. |
ewnBridge | 1.3.6.1.4.1.2736.1.1.6 | |||
ewnBridgeSTPState | 1.3.6.1.4.1.2736.1.1.6.1 | integer | read-write |
Spanning Tree Protocol functionality Enumeration: 'disabled': 0, 'enabled': 1. |
ewnBridgeAgingTime | 1.3.6.1.4.1.2736.1.1.6.2 | integer | read-write |
Bridge aging time 0 not allowed |
ewnIGMP | 1.3.6.1.4.1.2736.1.1.7 | |||
ewnIGMPState | 1.3.6.1.4.1.2736.1.1.7.1 | integer | read-write |
Internet Group Management Protocol functionality Enumeration: 'disabled': 0, 'passive': 1, 'active': 2. |
ewnIGMPCfgTable | 1.3.6.1.4.1.2736.1.1.7.2 | no-access |
IGMP configuration table, an entry per VLAN |
|
1.3.6.1.4.1.2736.1.1.7.2.1 | no-access |
IGMP configuration entry |
||
ewnIGMPCfgIndex | 1.3.6.1.4.1.2736.1.1.7.2.1.1 | integer | read-only |
IGMP configuration entry index |
ewnIGMPCfgVlanID | 1.3.6.1.4.1.2736.1.1.7.2.1.2 | integer | read-only |
IGMP configuration entry's VLAN ID |
ewnIGMPCfgIGMPVersion | 1.3.6.1.4.1.2736.1.1.7.2.1.3 | integer | read-write |
IGMP Version |
ewnIGMPCfgFastLeave | 1.3.6.1.4.1.2736.1.1.7.2.1.4 | integer | read-write |
IGMP Fast-leave function Enumeration: 'enable': 1, 'disable': 0. |
ewnIGMPCfgQueryInterval | 1.3.6.1.4.1.2736.1.1.7.2.1.5 | integer | read-write |
IGMP Querrier Interval for active mode |
ewnIGMPCfgMaxResponseTime | 1.3.6.1.4.1.2736.1.1.7.2.1.6 | integer | read-write |
IGMP Max Response Time for active mode |
ewnIGMPCfgReportSuppression | 1.3.6.1.4.1.2736.1.1.7.2.1.7 | integer | read-write |
IGMP Report Suppression function Enumeration: 'enable': 1, 'disable': 0. |
ewnIGMPRecordTable | 1.3.6.1.4.1.2736.1.1.7.3 | no-access |
IGMP record database table |
|
1.3.6.1.4.1.2736.1.1.7.3.1 | no-access |
IGMP entry |
||
ewnIGMPRecordIndex | 1.3.6.1.4.1.2736.1.1.7.3.1.1 | integer | read-only |
IGMP Group index |
ewnIGMPRecordGroupAddress | 1.3.6.1.4.1.2736.1.1.7.3.1.2 | ipaddress | read-only |
IGMP group address |
ewnIGMPRecordInterface | 1.3.6.1.4.1.2736.1.1.7.3.1.3 | displaystring | read-only |
IGMP group member interface |
ewnIGMPRecordUpTime | 1.3.6.1.4.1.2736.1.1.7.3.1.4 | displaystring | read-only |
IGMP group up time |
ewnIGMPRecordExpireTime | 1.3.6.1.4.1.2736.1.1.7.3.1.5 | displaystring | read-only |
IGMP group expire time |
ewnIGMPRecordLastReporter | 1.3.6.1.4.1.2736.1.1.7.3.1.6 | ipaddress | read-only |
IGMP group last reporter |
ewnVLAN | 1.3.6.1.4.1.2736.1.1.8 | |||
ewnVLANGVRPState | 1.3.6.1.4.1.2736.1.1.8.1 | integer | read-write |
GARP VLAN Registration Protocol functionality Enumeration: 'disabled': 0, 'enabled': 1. |
ewnVLANTable | 1.3.6.1.4.1.2736.1.1.8.2 | no-access |
VLAN Settings Table |
|
1.3.6.1.4.1.2736.1.1.8.2.1 | no-access |
VLAN Settings Entry |
||
ewnVLANIndex | 1.3.6.1.4.1.2736.1.1.8.2.1.1 | integer | read-only |
VLAN index |
ewnVLANID | 1.3.6.1.4.1.2736.1.1.8.2.1.2 | integer | read-write |
VLAN ID (valid values 1-4094) |
ewnVLANName | 1.3.6.1.4.1.2736.1.1.8.2.1.3 | displaystring | read-write |
VLAN Name. This can only be set during creation of VLAN. It cannot be modified in a later time. |
ewnVLANState | 1.3.6.1.4.1.2736.1.1.8.2.1.4 | integer | read-only |
The VLAN state. Enumeration: 'disabled': 1, 'active': 2, 'invalid': 0. |
ewnVLANType | 1.3.6.1.4.1.2736.1.1.8.2.1.5 | integer | read-only |
The VLAN type. Enumeration: 'dynamic': 2, 'static': 1, 'invalid': 0. |
ewnVLANStaticPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.6 | octet string | read-write |
Ports that always belong to the VLAN. |
ewnVLANStaticUntaggedPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.7 | octet string | read-write |
Untagged ports of the VLAN. |
ewnVLANCurrentPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.8 | octet string | read-only |
Ports currently belonging to the VLAN. |
ewnVLANCurrentUntaggedPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.9 | octet string | read-only |
Untagged ports currently belonging to the VLAN. |
ewnVLANCurrentRegisteredPortMap | 1.3.6.1.4.1.2736.1.1.8.2.1.10 | octet string | read-only |
Registered ports currently belonging to the VLAN. |
ewnVLANIPAddress | 1.3.6.1.4.1.2736.1.1.8.2.1.11 | displaystring | read-write |
VLAN IP address / mask |
ewnVLANAddVlan | 1.3.6.1.4.1.2736.1.1.8.3 | integer | read-write |
Add a new VLAN to ewnVLANTable |
ewnVLANDeleteVlan | 1.3.6.1.4.1.2736.1.1.8.4 | integer | read-write |
Delete a VLAN from ewnVLANTable |
ewnQoS | 1.3.6.1.4.1.2736.1.1.9 | |||
ewnQoSState | 1.3.6.1.4.1.2736.1.1.9.1 | integer | read-write |
QoS state Enumeration: 'disabled': 0, 'enabled': 1. |
ewnQoSTrust | 1.3.6.1.4.1.2736.1.1.9.2 | integer | read-write |
QoS trust mode Enumeration: 'none': 0, 'cosanddscp': 3, 'cos': 1, 'dscp': 2. |
ewnQoSPriorityQueueOut | 1.3.6.1.4.1.2736.1.1.9.3 | integer | read-write |
QoS priority queue out mode Enumeration: 'disabled': 0, 'enabled': 1. |
ewnQoSWRRqueueTable | 1.3.6.1.4.1.2736.1.1.9.4 | no-access |
QoS WRR queue table |
|
1.3.6.1.4.1.2736.1.1.9.4.1 | no-access |
QoS WRR queue table entry |
||
ewnQoSQueueIndex | 1.3.6.1.4.1.2736.1.1.9.4.1.1 | integer | read-only |
QoS Queue Index |
ewnQoSWRRqueueID | 1.3.6.1.4.1.2736.1.1.9.4.1.2 | integer | read-only |
QoS WRR queue ID |
ewnQoSWRRqueueCoSmap | 1.3.6.1.4.1.2736.1.1.9.4.1.3 | displaystring | read-write |
QoS WRR queue CoS mapping |
ewnQoSWRRqueueDSCPmap | 1.3.6.1.4.1.2736.1.1.9.4.1.4 | octet string | read-write |
QoS WRR queue DSCP mapping |
ewnQoSWRRqueueBandwidth | 1.3.6.1.4.1.2736.1.1.9.4.1.5 | integer | read-write |
QoS WRR queue bandwidth |
ewnSNMP | 1.3.6.1.4.1.2736.1.1.10 | |||
ewnSNMPState | 1.3.6.1.4.1.2736.1.1.10.1 | integer | read-write |
SNMP state Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSNMPCommunitySet | 1.3.6.1.4.1.2736.1.1.10.2 | displaystring | read-write |
Set community string currently active for this device |
ewnSNMPCommunityGet | 1.3.6.1.4.1.2736.1.1.10.3 | displaystring | read-write |
Get community string currently active for this device |
ewnSNMPTrapCommunity1 | 1.3.6.1.4.1.2736.1.1.10.4 | displaystring | read-write |
Trap community string 1 for this device |
ewnSNMPTrapCommunity2 | 1.3.6.1.4.1.2736.1.1.10.5 | displaystring | read-write |
Trap community string 2 for this device |
ewnSNMPTrapCommunity3 | 1.3.6.1.4.1.2736.1.1.10.6 | displaystring | read-write |
Trap community string 3 for this device |
ewnSNMPTrapCommunity4 | 1.3.6.1.4.1.2736.1.1.10.7 | displaystring | read-write |
Trap community string 4 for this device |
ewnSNMPTrapCommunity5 | 1.3.6.1.4.1.2736.1.1.10.8 | displaystring | read-write |
Trap community string 5 for this device |
ewnSNMPTrapIpAddress1 | 1.3.6.1.4.1.2736.1.1.10.9 | ipaddress | read-write |
Trap IP Address 1 for this device |
ewnSNMPTrapIpAddress2 | 1.3.6.1.4.1.2736.1.1.10.10 | ipaddress | read-write |
Trap IP Address 2 for this device |
ewnSNMPTrapIpAddress3 | 1.3.6.1.4.1.2736.1.1.10.11 | ipaddress | read-write |
Trap IP Address 3 for this device |
ewnSNMPTrapIpAddress4 | 1.3.6.1.4.1.2736.1.1.10.12 | ipaddress | read-write |
Trap IP Address 4 for this device |
ewnSNMPTrapIpAddress5 | 1.3.6.1.4.1.2736.1.1.10.13 | ipaddress | read-write |
Trap IP Address 5 for this device |
ewnSNMPTrapLinkDown | 1.3.6.1.4.1.2736.1.1.10.16 | integer | read-write |
Link Down Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSNMPTrapLinkUp | 1.3.6.1.4.1.2736.1.1.10.17 | integer | read-write |
Link Up Trap functionality Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSNMPResetNeed | 1.3.6.1.4.1.2736.1.1.10.20 | integer | read-only |
Indicate need to reset SNMP process for SNMP entry changed. Enumeration: 'yes': 1, 'no': 0. |
ewnSNMPResetSNMP | 1.3.6.1.4.1.2736.1.1.10.21 | integer | read-write |
Reset SNMP process for enable SNMP new setting. Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSNMPResetRMONCount | 1.3.6.1.4.1.2736.1.1.10.22 | integer | read-write |
Reset RMON counters on all the ports. Please refer to ewnPortEntry group to reset specific port. Enumeration: 'disabled': 0, 'enabled': 1. |
ewnSDB | 1.3.6.1.4.1.2736.1.1.11 | |||
ewnBridgeSDBTable | 1.3.6.1.4.1.2736.1.1.11.1 | no-access |
Switching Database table |
|
1.3.6.1.4.1.2736.1.1.11.1.1 | no-access |
SDB Entry |
||
ewnBridgeSDBIndex | 1.3.6.1.4.1.2736.1.1.11.1.1.1 | integer | read-only |
Switching Database Index |
ewnBridgeSDBMacAddress | 1.3.6.1.4.1.2736.1.1.11.1.1.2 | physaddress | read-only |
Switching Database MAC address |
ewnBridgeSDBVlanId | 1.3.6.1.4.1.2736.1.1.11.1.1.3 | integer | read-only |
Switching Database VLAN ID |
ewnBridgeSDBPortNo | 1.3.6.1.4.1.2736.1.1.11.1.1.4 | integer | read-only |
Switching Database port number |
ewnRadius | 1.3.6.1.4.1.2736.1.1.12 | |||
ewnDHCP | 1.3.6.1.4.1.2736.1.1.13 | |||
ewnSensor | 1.3.6.1.4.1.2736.1.1.14 |