EdgeSwitch-INVENTORY-MIB: View SNMP OID List / Download MIB

VENDOR: BROADCOM LIMITED


 Home MIB: EdgeSwitch-INVENTORY-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, EdgeSwitch-REF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathInventory 1.3.6.1.4.1.4413.1.1.13
This MIB defines the objects used for FastPath to configure and report information and status of units, slots and supported cards.
       agentInventoryTraps 1.3.6.1.4.1.4413.1.1.13.0
           agentInventoryCardMismatch 1.3.6.1.4.1.4413.1.1.13.0.1
Sent when a card is inserted which is a different type than what the slot was configured for.
           agentInventoryCardUnsupported 1.3.6.1.4.1.4413.1.1.13.0.2
Sent when a card is inserted which is of a type that is not supported by the slot.
           agentInventoryStackPortLinkUp 1.3.6.1.4.1.4413.1.1.13.0.3
Sent when a Stack Port is connected to annother Stack Member.
           agentInventoryStackPortLinkDown 1.3.6.1.4.1.4413.1.1.13.0.4
Sent when a Stack Port is disconnected from annother Stack Member.
           agentInventorySFSStart 1.3.6.1.4.1.4413.1.1.13.0.5
Sent when Stack Firmware Synchronization operation is started on a Stack Member.
           agentInventorySFSComplete 1.3.6.1.4.1.4413.1.1.13.0.6
Sent when Stack Firmware Synchronization operation is complete on a Stack Member.
           agentInventorySFSFail 1.3.6.1.4.1.4413.1.1.13.0.7
Sent when Stack Firmware Synchronization operation failed for a Stack Member.
       agentInventoryStackGroup 1.3.6.1.4.1.4413.1.1.13.1
           agentInventoryStackReplicateSTK 1.3.6.1.4.1.4413.1.1.13.1.1 integer read-write
Initiates STK copy from management unit to all other management capable units in the stack. Enumeration: 'enable': 1, 'disable': 2.
           agentInventoryStackReload 1.3.6.1.4.1.4413.1.1.13.1.2 integer read-write
Initiates stack reload. Enumeration: 'enable': 1, 'disable': 2.
           agentInventoryStackMaxUnitNumber 1.3.6.1.4.1.4413.1.1.13.1.3 unsigned32 read-only
Indicates the maximum allowed Unit Number configurable on the stack.
           agentInventoryStackReplicateSTKStatus 1.3.6.1.4.1.4413.1.1.13.1.4 integer read-only
Indicates the current status of an STK copy from management unit to all other management capable units inthe stack. Enumeration: 'inProgress': 1, 'finishedWithSuccess': 3, 'notInProgress': 2, 'finishedWithError': 4.
           agentInventoryStackSTKname 1.3.6.1.4.1.4413.1.1.13.1.5 integer read-write
STK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set. Enumeration: 'image2': 3, 'image1': 2, 'unconfigured': 1.
           agentInventoryStackActivateSTK 1.3.6.1.4.1.4413.1.1.13.1.6 integer read-write
Activates the specified STK file on all units on the stack. Enumeration: 'enable': 1, 'disable': 2.
           agentInventoryStackDeleteSTK 1.3.6.1.4.1.4413.1.1.13.1.7 integer read-write
Deletes the specified STK file from all units on the stack. Enumeration: 'enable': 1, 'disable': 2.
           agentInventoryStackTemplateId 1.3.6.1.4.1.4413.1.1.13.1.8 unsigned32 read-write
Sets the stack template ID on all units in the stack. Deletes the startup configuration on all affected units and resets all units in the stack. This is write-only value. It always returns '0' on request.
       agentInventoryUnitGroup 1.3.6.1.4.1.4413.1.1.13.2
           agentInventorySupportedUnitTable 1.3.6.1.4.1.4413.1.1.13.2.1 no-access
TODO
               agentInventorySupportedUnitEntry 1.3.6.1.4.1.4413.1.1.13.2.1.1 no-access
TODO
                   agentInventorySupportedUnitIndex 1.3.6.1.4.1.4413.1.1.13.2.1.1.1 unsigned32 no-access
The unit identifier associated with the supported unit.
                   agentInventorySupportedUnitModelIdentifier 1.3.6.1.4.1.4413.1.1.13.2.1.1.4 displaystring read-only
The model identifier for the supported unit.
                   agentInventorySupportedUnitDescription 1.3.6.1.4.1.4413.1.1.13.2.1.1.5 displaystring read-only
The description of the supported unit.
                   agentInventorySupportedUnitExpectedCodeVer 1.3.6.1.4.1.4413.1.1.13.2.1.1.6 displaystring read-only
The expected code version.
           agentInventoryUnitTable 1.3.6.1.4.1.4413.1.1.13.2.2 no-access
A table of Per-Unit configuration objects.
               agentInventoryUnitEntry 1.3.6.1.4.1.4413.1.1.13.2.2.1 no-access
Each Instance corresponds with a different unit managed by this agent.
                   agentInventoryUnitNumber 1.3.6.1.4.1.4413.1.1.13.2.2.1.1 unsigned32 no-access
The unit number associated with this unit.
                   agentInventoryUnitAssignNumber 1.3.6.1.4.1.4413.1.1.13.2.2.1.2 unsigned32 read-only
Allows setting the unit number associated with this unit. This number must be less than the value returned by agentInventoryStackMaxUnitNumber. Setting this object to a non-zero value will initate unit renumbering. The switch will be reset to perform unit renumbering and the configuration of switch interfaces will be cleared. If the unit being renumbered is the manager of the stack, then all the switches in the stack will be reset to perform Manager unit renumbering and the configuration of Manager switch interfaces will be cleared.
                   agentInventoryUnitType 1.3.6.1.4.1.4413.1.1.13.2.2.1.3 agentinventoryunittype read-only
The Unit Type identifier for this unit.
                   agentInventoryUnitSupportedUnitIndex 1.3.6.1.4.1.4413.1.1.13.2.2.1.4 unsigned32 read-only
The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with.
                   agentInventoryUnitMgmtAdmin 1.3.6.1.4.1.4413.1.1.13.2.2.1.6 integer read-only
Indicates whether the unit is a Management Unit, a Stack Unit, or has been configured to be a Management Unit. Setting this object to mgmtUnit(1) initiates transfer of the management functionality to the specified stack unit. Object values stackUnit(2) and mgmtUnassigned(3) cannot be set. Enumeration: 'mgmtUnit': 1, 'stackUnit': 2, 'mgmtUnassigned': 3.
                   agentInventoryUnitHWMgmtPref 1.3.6.1.4.1.4413.1.1.13.2.2.1.7 agentinventoryunitpreference read-only
Indicates the default preference assigned to the unit.
                   agentInventoryUnitHWMgmtPrefValue 1.3.6.1.4.1.4413.1.1.13.2.2.1.8 unsigned32 read-only
Indicates the default preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
                   agentInventoryUnitAdminMgmtPref 1.3.6.1.4.1.4413.1.1.13.2.2.1.9 agentinventoryunitpreference read-only
Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0.
                   agentInventoryUnitAdminMgmtPrefValue 1.3.6.1.4.1.4413.1.1.13.2.2.1.10 unsigned32 read-only
Indicates the configured preference value assigned to the unit. The preference value indicates how likely this unit is to be chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of agentInventoryUnitHWMgmtPref if assigned.
                   agentInventoryUnitStatus 1.3.6.1.4.1.4413.1.1.13.2.2.1.11 integer read-only
The unit status of this unit. Enumeration: 'ok': 1, 'codeUpdate': 7, 'codeMismatch': 3, 'stmMismatch': 8, 'unsupported': 2, 'configMismatch': 4, 'notPresent': 6, 'sdmMismatch': 5.
                   agentInventoryUnitDetectedCodeVer 1.3.6.1.4.1.4413.1.1.13.2.2.1.12 displaystring read-only
The version of code running on this unit. If the unit is not detected then the code version is an empty string.
                   agentInventoryUnitDetectedCodeInFlashVer 1.3.6.1.4.1.4413.1.1.13.2.2.1.13 displaystring read-only
The version of code that is currently stored in FLASH memory on the unit. This code will execute after the unit is reset. If the unit is not detected then this object will return an empty string.
                   agentInventoryUnitUpTime 1.3.6.1.4.1.4413.1.1.13.2.2.1.14 timeticks read-only
The system up time of the unit.
                   agentInventoryUnitDescription 1.3.6.1.4.1.4413.1.1.13.2.2.1.15 displaystring read-only
The description of the unit.
                   agentInventoryUnitReplicateSTK 1.3.6.1.4.1.4413.1.1.13.2.2.1.16 integer read-write
Initiates the specified STK file copy from management unit to this unit. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventoryUnitReload 1.3.6.1.4.1.4413.1.1.13.2.2.1.17 integer read-write
Reload a specific unit in the stack. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventoryUnitRowStatus 1.3.6.1.4.1.4413.1.1.13.2.2.1.18 rowstatus read-only
The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type of of unit to pre-configure. active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
                   agentInventoryUnitSerialNumber 1.3.6.1.4.1.4413.1.1.13.2.2.1.19 displaystring read-only
The Serial Number of the unit.
                   agentInventoryUnitImage1Version 1.3.6.1.4.1.4413.1.1.13.2.2.1.20 displaystring read-only
Code version for Image1.
                   agentInventoryUnitImage2Version 1.3.6.1.4.1.4413.1.1.13.2.2.1.21 displaystring read-only
Code version for Image2.
                   agentInventoryUnitSTKname 1.3.6.1.4.1.4413.1.1.13.2.2.1.22 integer read-write
STK file to be used for copy/delete/activate operatiosn. Enumeration: 'image2': 3, 'image1': 2.
                   agentInventoryUnitActivateSTK 1.3.6.1.4.1.4413.1.1.13.2.2.1.23 integer read-write
Activates the specified STK file on this unit. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventoryUnitDeleteSTK 1.3.6.1.4.1.4413.1.1.13.2.2.1.24 integer read-write
Deletes the specified STK file on this unit. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventoryUnitReplicateSTKStatus 1.3.6.1.4.1.4413.1.1.13.2.2.1.25 integer read-only
Indicates the current status of an STK copy from the management unit to another management capable unit in the stack. Enumeration: 'inProgress': 1, 'finishedWithSuccess': 3, 'notInProgress': 2, 'finishedWithError': 4.
                   agentInventoryUnitStandby 1.3.6.1.4.1.4413.1.1.13.2.2.1.26 integer read-write
Configures the standby status of this unit. The Management unit may not be configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear standby configuration. A unit that is standby_opr(2) may NOT be set to unassigned(1). Enumeration: 'standby-cfg': 3, 'unassigned': 1, 'standby-opr': 2.
                   agentInventoryUnitSFSTransferStatus 1.3.6.1.4.1.4413.1.1.13.2.2.1.27 integer read-only
Status parameter to indicate stack firmware synchronization operation status for a particular unit. If SFS transfer is in progress for a particular unit status will be inProgress(2),otherwise status will be noAction(1). Enumeration: 'inProgress': 2, 'noAction': 1.
                   agentInventoryUnitSFSLastAttemptStatus 1.3.6.1.4.1.4413.1.1.13.2.2.1.28 integer read-only
Status parameter to indicate whether the last synchronization attempt succeeded or failed.If SFS is initated for a particular unit and if it completes successfully this object will return success(2),if SFS operation failed lasttime for this unit,this object will return failure(3).if SFS did not initiate for this unit,this object will retunrn none(1). If activation of the image failed because the underlying bootcode version is older than the minimum boot code version specified in the image, this object returns min-bootcode-version-not-met(4) Enumeration: 'failure': 3, 'none': 1, 'min-bootcode-version-not-present': 4, 'success': 2.
       agentInventorySlotGroup 1.3.6.1.4.1.4413.1.1.13.3
           agentInventorySlotTable 1.3.6.1.4.1.4413.1.1.13.3.1 no-access
TODO
               agentInventorySlotEntry 1.3.6.1.4.1.4413.1.1.13.3.1.1 no-access
TODO
                   agentInventorySlotNumber 1.3.6.1.4.1.4413.1.1.13.3.1.1.1 unsigned32 no-access
An incrimental index of the slot in this unit.
                   agentInventorySlotStatus 1.3.6.1.4.1.4413.1.1.13.3.1.1.3 integer read-only
Indicates the current status of the slot. Enumeration: 'full': 2, 'empty': 1, 'error': 3.
                   agentInventorySlotPowerMode 1.3.6.1.4.1.4413.1.1.13.3.1.1.4 integer read-write
Indicates whether a card in this slot will be powered on. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventorySlotAdminMode 1.3.6.1.4.1.4413.1.1.13.3.1.1.5 integer read-write
Indicates whether this card is administratively enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                   agentInventorySlotInsertedCardType 1.3.6.1.4.1.4413.1.1.13.3.1.1.6 agentinventorycardtype read-only
Indicates the inserted card type. Will return 0 if the slot is not full.
                   agentInventorySlotConfiguredCardType 1.3.6.1.4.1.4413.1.1.13.3.1.1.7 agentinventorycardtype read-write
Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards.
                   agentInventorySlotCapabilities 1.3.6.1.4.1.4413.1.1.13.3.1.1.8 bits read-only
Indicates the different capabilities this slot has. pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled through the object agentInventorySlotPowerMode Bits: 'pluggable': 0, 'power-down': 1.
       agentInventoryCardGroup 1.3.6.1.4.1.4413.1.1.13.4
           agentInventoryCardTypeTable 1.3.6.1.4.1.4413.1.1.13.4.1 no-access
Contains information for all supported Card Types in the system.
               agentInventoryCardTypeEntry 1.3.6.1.4.1.4413.1.1.13.4.1.1 no-access
Contains information related to a specific Card Type.
                   agentInventoryCardIndex 1.3.6.1.4.1.4413.1.1.13.4.1.1.1 unsigned32 no-access
An arbitrary index used to identify cards in the table.
                   agentInventoryCardType 1.3.6.1.4.1.4413.1.1.13.4.1.1.2 agentinventorycardtype read-only
The Card Type associated with this instance.
                   agentInventoryCardModelIdentifier 1.3.6.1.4.1.4413.1.1.13.4.1.1.3 displaystring read-only
The model identifier for the supported Card Type.
                   agentInventoryCardDescription 1.3.6.1.4.1.4413.1.1.13.4.1.1.4 displaystring read-only
The card description for the supported Card Type.
       agentInventoryComponentGroup 1.3.6.1.4.1.4413.1.1.13.5
           agentInventoryComponentTable 1.3.6.1.4.1.4413.1.1.13.5.1 no-access
Contains information for all supported Components in the system.
               agentInventoryComponentEntry 1.3.6.1.4.1.4413.1.1.13.5.1.1 no-access
Contains information related to a specific Components.
                   agentInventoryComponentIndex 1.3.6.1.4.1.4413.1.1.13.5.1.1.1 unsigned32 no-access
An arbitrary index used to reference components in the table.
                   agentInventoryComponentMnemonic 1.3.6.1.4.1.4413.1.1.13.5.1.1.2 displaystring read-only
The abreviated name of this component.
                   agentInventoryComponentName 1.3.6.1.4.1.4413.1.1.13.5.1.1.3 displaystring read-only
The name of the component for this instance.
       fastPathInventoryConformance 1.3.6.1.4.1.4413.1.1.13.6
           fastPathInventoryCompliances 1.3.6.1.4.1.4413.1.1.13.6.1
               fastPathInventoryCompliance 1.3.6.1.4.1.4413.1.1.13.6.1.1
The compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB.
               fastPathInventoryCompliance2 1.3.6.1.4.1.4413.1.1.13.6.1.2
The compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB.
           fastPathInventoryGroups 1.3.6.1.4.1.4413.1.1.13.6.2
               fastPathInventorySupportedUnitGroup 1.3.6.1.4.1.4413.1.1.13.6.2.1
The collection of objects which are used to represent multiple units in the stack.
               fastPathInventoryUnitGroup 1.3.6.1.4.1.4413.1.1.13.6.2.2
The collection of objects which are used to represent multiple units in the stack.
               fastPathInventorySlotGroup 1.3.6.1.4.1.4413.1.1.13.6.2.3
The collection of objects which are used to represent slots in the each unit managed by this agent.
               fastPathInventoryCardGroup 1.3.6.1.4.1.4413.1.1.13.6.2.4
The collection of objects which are used to represent the card types this system can manage.
               fastPathInventoryNotificationsGroup 1.3.6.1.4.1.4413.1.1.13.6.2.5
The collection of notifications used to indicate problems associated with the insertion of cards.
       agentInventoryStackPortGroup 1.3.6.1.4.1.4413.1.1.13.7
           agentInventoryStackPortIpTelephonyQOSSupport 1.3.6.1.4.1.4413.1.1.13.7.1 integer read-write
Controls whether the Stack Ports give higher priority to IP Telephony traffic. Enumeration: 'enable': 1, 'disable': 2.
           agentInventoryStackPortTable 1.3.6.1.4.1.4413.1.1.13.7.2 no-access
Contains information for all Stack Ports present in the system.
               agentInventoryStackPortEntry 1.3.6.1.4.1.4413.1.1.13.7.2.1 no-access
Contains information related to a specific Stack Port.
                   agentInventoryStackPortIndex 1.3.6.1.4.1.4413.1.1.13.7.2.1.1 unsigned32 no-access
An arbitrary index used to reference Stack Ports in the table.
                   agentInventoryStackPortUnit 1.3.6.1.4.1.4413.1.1.13.7.2.1.2 unsigned32 read-only
The Unit Index this Stack Port is physically located on.
                   agentInventoryStackPortTag 1.3.6.1.4.1.4413.1.1.13.7.2.1.3 displaystring read-only
The name of the Stack Port for this instance.
                   agentInventoryStackPortConfiguredStackMode 1.3.6.1.4.1.4413.1.1.13.7.2.1.4 integer read-write
Configured mode of the Stack Port. Changes to this value happen only after a reset of the switch. Enumeration: 'ethernet': 2, 'stack': 1.
                   agentInventoryStackPortRunningStackMode 1.3.6.1.4.1.4413.1.1.13.7.2.1.5 integer read-only
Currently operational mode of the Stack Port. Enumeration: 'ethernet': 2, 'stack': 1.
                   agentInventoryStackPortLinkStatus 1.3.6.1.4.1.4413.1.1.13.7.2.1.6 integer read-only
Link status of the Stack Port. Ports which are in ethernet mode will return a status of down(2). Enumeration: 'down': 2, 'up': 1.
                   agentInventoryStackPortLinkSpeed 1.3.6.1.4.1.4413.1.1.13.7.2.1.7 gauge32 read-only
Speed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0.
                   agentInventoryStackPortDataRate 1.3.6.1.4.1.4413.1.1.13.7.2.1.8 counter32 read-only
Approximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0.
                   agentInventoryStackPortErrorRate 1.3.6.1.4.1.4413.1.1.13.7.2.1.9 counter32 read-only
Approximate error rate on the stack port. Measured in Errors per Second. Ports which are in ethernet mode will return 0.
                   agentInventoryStackPortTotalErrors 1.3.6.1.4.1.4413.1.1.13.7.2.1.10 counter32 read-only
Number of errors since boot. The counter may wrap. Ports which are in ethernet mode will return 0.
       agentInventorySFSGroup 1.3.6.1.4.1.4413.1.1.13.8
           agentInventoryStackUnitNumber 1.3.6.1.4.1.4413.1.1.13.8.1 unsigned32 no-access
The unit number associated with stack unit .
           agentInventorySFS 1.3.6.1.4.1.4413.1.1.13.8.2 integer read-write
Controls whether the Stack Firmware Synchronization is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
           agentInventorySFSAllowDowngrade 1.3.6.1.4.1.4413.1.1.13.8.3 integer read-write
Controls whether downgrading the image on the stack member is allowed or not if the firmware version of manager is older to firmware version of stack member Enumeration: 'enable': 1, 'disable': 2.
           agentInventorySFSTrap 1.3.6.1.4.1.4413.1.1.13.8.4 integer read-write
Controls sending of traps during Stack firmware synchronization operation Enumeration: 'enable': 1, 'disable': 2.