EXTREME-SNMPV3-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS

Home	MIB: EXTREME-SNMPV3-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMP-TARGET-MIB, EXTREME-BASE-MIB, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
extremeSnmpv3	1.3.6.1.4.1.1916.1.23			Extreme-specific SNMPv3 objects
extremeTarget	1.3.6.1.4.1.1916.1.23.1
extremeTargetAddrExtTable	1.3.6.1.4.1.1916.1.23.1.1		no-access	This table is an extension to the snmpTargetAddrTable found in the SNMP-TARGET-MIB. It contains Extreme Networks specific objects needed for each management target.
extremeTargetAddrExtEntry	1.3.6.1.4.1.1916.1.23.1.1.1		no-access	An entry in the extremeTargetAddrExtTable.
extremeTargetAddrExtIgnoreMPModel	1.3.6.1.4.1.1916.1.23.1.1.1.1	truthvalue	read-write	When this object is set to TRUE, the version of the trap/notification sent to the corresponding management target (trap receiver) will be the same as in releases of Extremeware prior to 7.1.0. Thus, the value of the snmpTargetParamsMPModel object in the snmpTargetParamsTable will be ignored while determining the version of the trap/notification to be sent. When a trap-receiver is created via the RMON trapDestTable or from the CLI command 'configure snmp add trapreceiver ....', the value of this object will be set to TRUE for the corresponding entry in this table.
extremeTargetAddrExtStandardMode	1.3.6.1.4.1.1916.1.23.1.1.1.2	truthvalue	read-write	When this object is set to TRUE, the management target will be treated as a 'standard mode' one, in that any Extreme Networks specific extra varbinds present in a standards-based trap/notification will not be sent to this management target. Only the varbinds defined in the standard will be sent.
extremeTargetAddrExtTrapDestIndex	1.3.6.1.4.1.1916.1.23.1.1.1.3	integer	read-only	This object contains the value of the trapDestIndex in the corresponding entry of the RMON trapDestTable.
extremeTargetAddrExtUseEventComm	1.3.6.1.4.1.1916.1.23.1.1.1.4	truthvalue	read-write	This object is used only when sending RMON alarms as SNMPv3 traps. When it is set to TRUE and an RMON risingAlarm or fallingAlarm is being sent for an event, then the eventCommunity in the RMON event table is compared to the snmpTargetAddrName in the snmpTargetAddrTable. The alarm is sent to the target only when the two are the same. This behavior is exhibited only when the snmpTargetParamsMPModel corresponding to the target indicates an SNMPv3 trap. For SNMPv1/v2c traps, the community in the RMON trapDestTable is used for the comparision, which is the 'regular' method, as per the standards. When this object is set to FALSE, then the RMON alarm (if being sent as an SNMPv3 trap) is sent without using the event community for any comparision.