EXTREME-SERVICES-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS


 Home MIB: EXTREME-SERVICES-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, EXTREME-BASE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 extremeServices 1.3.6.1.4.1.1916.1.26
Extreme Upper layer services objects
       extremeSyslog 1.3.6.1.4.1.1916.1.26.1
           extremeRemoteSyslogServerTable 1.3.6.1.4.1.1916.1.26.1.1 no-access
This table is used to configure remote syslog servers and contains information on the same.
               extremeRemoteSyslogServerEntry 1.3.6.1.4.1.1916.1.26.1.1.1 no-access
An entry in the extremeRemoteSyslogServerTable.
                   extremeRemoteSyslogServerAddressType 1.3.6.1.4.1.1916.1.26.1.1.1.1 inetaddresstype read-only
The type of address specified in the object 'extremeRemoteSyslogServerAddress'. Currently, only 'ipv4' and 'dns' are supported.
                   extremeRemoteSyslogServerAddress 1.3.6.1.4.1.1916.1.26.1.1.1.2 inetaddress read-only
The address of the remote syslog server. This can be a DNS name or an IPv4 address.
                   extremeRemoteSyslogServerPort 1.3.6.1.4.1.1916.1.26.1.1.1.3 integer read-only
The UDP port number of the remote syslog server to which syslog messages will be sent.
                   extremeRemoteSyslogServerFacility 1.3.6.1.4.1.1916.1.26.1.1.1.4 integer read-only
The facility which will be sent in all syslog messages to this remote syslog server. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
                   extremeRemoteSyslogServerSeverity 1.3.6.1.4.1.1916.1.26.1.1.1.5 bits read-only
The syslog message severity. All syslog messages of the specified severity for which the Bits are set, will be sent to this syslog server. When setting this object in a 'createAndGo' request, all lower bits upto and including the desired bit position must be set. For example, if bit info(4) needs to be set then bits critical(0), error(1), warning(2), notice(3) and info(4) must also be set in the request. Consequently, all syslog messages of a given severity and higher will be sent to the syslog server. It is not possible to send messages that match only a few selected non-contiguous severities. Bits: 'info': 4, 'notice': 3, 'debugSummary': 5, 'debugData': 7, 'debugVerbose': 6, 'critical': 0, 'error': 1, 'warning': 2.
                   extremeRemoteSyslogServerStatus 1.3.6.1.4.1.1916.1.26.1.1.1.6 rowstatus read-only
The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row.
           extremeEnableRemoteSyslog 1.3.6.1.4.1.1916.1.26.1.2 truthvalue read-write
The enable/disable status of remote syslog messages.
       extremeDNS 1.3.6.1.4.1.1916.1.26.3
           extremeDNSServerTable 1.3.6.1.4.1.1916.1.26.3.1 no-access
This table is used to configure DNS servers. There can be at most two rows in this table.
               extremeDNSServerEntry 1.3.6.1.4.1.1916.1.26.3.1.1 no-access
An entry in the extremeDNSServerTable.
                   extremeDNSServerAddressIndex 1.3.6.1.4.1.1916.1.26.3.1.1.1 integer no-access
This is an integer index. Only 1 and 2 are supported for this
                   extremeDNSServerAddressType 1.3.6.1.4.1.1916.1.26.3.1.1.2 inetaddresstype read-only
The address type of the DNS server. This can be a DNS name or an IPv4 address.
                   extremeDNSServerAddress 1.3.6.1.4.1.1916.1.26.3.1.1.3 inetaddress read-only
The address of the DNS server. This can be a DNS name or an IPv4 address.
       extremeAuthServer 1.3.6.1.4.1.1916.1.26.4
           extremeAuthServerEnableTable 1.3.6.1.4.1.1916.1.26.4.1 no-access
This table is used to enable/disable Auth servers
               extremeAuthServerEnableEntry 1.3.6.1.4.1.1916.1.26.4.1.1 no-access
An entry in the extremeAuthServerEnableTable.
                   extremeAuthServerEnableServerType 1.3.6.1.4.1.1916.1.26.4.1.1.1 authservertype no-access
Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
                   extremeAuthServerEnableAccessType 1.3.6.1.4.1.1916.1.26.4.1.1.2 authserveraccesstype no-access
Specifies whether this server is for management access or netlogin access.
                   extremeAuthServerEnable 1.3.6.1.4.1.1916.1.26.4.1.1.3 truthvalue read-write
Enable/Disable the Radius/tacas Server
           extremeAuthServerTable 1.3.6.1.4.1.1916.1.26.4.2 no-access
This table is used to configure radius/tacacs servers.
               extremeAuthServerEntry 1.3.6.1.4.1.1916.1.26.4.2.1 no-access
An entry in the extremeAuthServerTable.
                   extremeAuthServerIndex 1.3.6.1.4.1.1916.1.26.4.2.1.1 integer no-access
Integer index of the server.
                   extremeAuthServerAddressType 1.3.6.1.4.1.1916.1.26.4.2.1.2 inetaddresstype read-write
Type IP address of the radius/tacas server.
                   extremeAuthServerAddress 1.3.6.1.4.1.1916.1.26.4.2.1.3 inetaddress read-write
IP address of the radius/tacas server.
                   extremeAuthServerClientAddressType 1.3.6.1.4.1.1916.1.26.4.2.1.4 inetaddresstype read-write
Type of IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its clients. The switch should have a VLAN with this IP address.
                   extremeAuthServerClientAddress 1.3.6.1.4.1.1916.1.26.4.2.1.5 inetaddress read-write
IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its clients. The switch should have a VLAN with this IP address.
                   extremeAuthServerPort 1.3.6.1.4.1.1916.1.26.4.2.1.6 integer read-write
Port number of the radius/tacas server.
                   extremeAuthServerSecret 1.3.6.1.4.1.1916.1.26.4.2.1.7 octet string read-write
This is the shared secret between the Authenticator and radius/tacas server. This is logically write-only.
                   extremeAuthServerReTransmit 1.3.6.1.4.1.1916.1.26.4.2.1.8 integer read-write
This is the timeout in seconds after which the Authenticator will re transmit requests to the radius/tacas server.
                   extremeAuthServerType 1.3.6.1.4.1.1916.1.26.4.2.1.9 authservertype read-write
Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
                   extremeAuthServerIsPrimary 1.3.6.1.4.1.1916.1.26.4.2.1.10 truthvalue read-write
Specifies whether this is the primary or the secondary server. Is TRUE if the server is primary.
                   extremeAuthServerAccessType 1.3.6.1.4.1.1916.1.26.4.2.1.11 authserveraccesstype read-write
Specifies whether this server is for management access or netlogin access
                   extremeAuthServerStatus 1.3.6.1.4.1.1916.1.26.4.2.1.12 rowstatus read-only
The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row.