ESSENTIAL-ODS-ESS2000-HIPPI-SWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: ESSENTIAL COMMUNICATIONS


 Home MIB: ESSENTIAL-ODS-ESS2000-HIPPI-SWITCH-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 essentialCommunications 1.3.6.1.4.1.2159
           ecRoot 1.3.6.1.4.1.2159.1
               ecProducts 1.3.6.1.4.1.2159.1.3
                   ess2000MIB 1.3.6.1.4.1.2159.1.3.2
                       switch 1.3.6.1.4.1.2159.1.3.2.1
                           switchDescription 1.3.6.1.4.1.2159.1.3.2.1.1 displaystring read-only
Returns the description, vendor, and version numbers of the switch.
                           switchNumOfPorts 1.3.6.1.4.1.2159.1.3.2.1.2 gauge read-only
The number of slots in this switch. (Max number of media access cards).
                           switchSensors 1.3.6.1.4.1.2159.1.3.2.1.3 displaystring read-only
This value returns the status of the temperature and power supply sensors. From least to most significant byte the values are power supply 1-3 with the most signficant byte being the over temperature sensor. 0 indicates the sensor is autodectable and not installed. 1 indicates the sensor is OK. 2 indicates the sensor is not OK.
                       switchControlCard 1.3.6.1.4.1.2159.1.3.2.2
                           sccDescription 1.3.6.1.4.1.2159.1.3.2.2.1 displaystring read-only
The model, vendor, and version number of the switch control card.
                           sccDateTime 1.3.6.1.4.1.2159.1.3.2.2.2 displaystring read-write
The date/time in the real time clock. Format: yyyymmddhhmmss
                           sccAdminStatus 1.3.6.1.4.1.2159.1.3.2.2.3 integer read-write
The desired state of the switch. 1 indicates switch is up. 2 will make the switch reset.
                           sccOperStatus 1.3.6.1.4.1.2159.1.3.2.2.4 integer read-only
The current state of the switch. 1 indicates the switch is up. 2 indicates the switch is resetting. SNMP operations can not occur when the switch is resetting. 3 indicates a busy switch. SNMP operations can not occur when the switch is busy.
                       mediaInterfaceCards 1.3.6.1.4.1.2159.1.3.2.3
                           backPlaneTable 1.3.6.1.4.1.2159.1.3.2.3.1 no-access
This table represent all of the slots in a HIPPI switch. None of the rows can be added to or deleted by the user.
                               backPlaneEntry 1.3.6.1.4.1.2159.1.3.2.3.1.1 no-access
A row in the table describing one slot in the switch backplane.
                                   backPlaneIndex 1.3.6.1.4.1.2159.1.3.2.3.1.1.1 gauge no-access
The table index for this slot on the backplane.
                                   backPlaneNumber 1.3.6.1.4.1.2159.1.3.2.3.1.1.2 gauge read-only
The slot number as seen printed on the switch (backPlaneIndex + 1)
                                   backPlaneCard 1.3.6.1.4.1.2159.1.3.2.3.1.1.3 integer read-only
The type of MIC present in this slot of the backplane on the switch 0 No MIC 1 Unknown MIC 2 Parallel MIC 3 Serial MIC
                                   mICPowerUpInitError 1.3.6.1.4.1.2159.1.3.2.3.1.1.4 gauge read-only
1 if error detected by MIC on start-up, else 0.
                                   mICHippiParityBurstError 1.3.6.1.4.1.2159.1.3.2.3.1.1.5 integer read-only
Type of parity error. 0 None 1 XDeMux (Transmitting) 2 XMux (Receiving)
                                   mICLinkReady 1.3.6.1.4.1.2159.1.3.2.3.1.1.6 gauge read-only
Valid the SMIC only. 1 if link ready asserted, else 0.
                                   mICSourceInterconnect 1.3.6.1.4.1.2159.1.3.2.3.1.1.7 gauge read-only
Source interconnect is valid for the PMIC only. 1 if interconnect is true else 0
                                   mICSourceRequest 1.3.6.1.4.1.2159.1.3.2.3.1.1.8 gauge read-only
1 if source request is asserted else 0.
                                   mICSourceConnect 1.3.6.1.4.1.2159.1.3.2.3.1.1.9 gauge read-only
1 if source connect is asserted else 0.
                                   mICSourceLastConnectAttempt 1.3.6.1.4.1.2159.1.3.2.3.1.1.10 integer read-only
0 if no last connect attempt. 1 if last source request was successful or no last connect. 2 Connection underway. 3 if last connect was rejected downstream.
                                   mICDestinationInterconnect 1.3.6.1.4.1.2159.1.3.2.3.1.1.11 gauge read-only
1 if destination interconnect is asserted else 0.
                                   mICDestinationRequest 1.3.6.1.4.1.2159.1.3.2.3.1.1.12 gauge read-only
1 if destination request is asserted else 0.
                                   mICDestinationConnect 1.3.6.1.4.1.2159.1.3.2.3.1.1.13 gauge read-only
1 if destination connect is asserted else 0.
                                   mICByteCounterOverflow 1.3.6.1.4.1.2159.1.3.2.3.1.1.14 gauge read-only
The number of times the byte counter has over-flowed.
                                   mICNumberOfBytes 1.3.6.1.4.1.2159.1.3.2.3.1.1.15 gauge read-only
The number of bytes that have passed through the MIC.
                                   mICNumberOfPackets 1.3.6.1.4.1.2159.1.3.2.3.1.1.16 gauge read-only
The number of times packets has been asserted.
                                   mICConnectsSuccessful 1.3.6.1.4.1.2159.1.3.2.3.1.1.17 gauge read-only
The number of times this MIC has connected since reset.
                       sourceRoutes 1.3.6.1.4.1.2159.1.3.2.4
                           srcRouteTable 1.3.6.1.4.1.2159.1.3.2.4.1 no-access
This table holds all of the source routes for this switch. FORMAT: OutputPort InputPortList Status. Output port is 0 to 31 Input port is 0 to 31 List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. Status is 0 (disabled) or 1 (enabled)
                               srcRouteEntry 1.3.6.1.4.1.2159.1.3.2.4.1.1 no-access
One row in the source route table.
                                   srcIndex 1.3.6.1.4.1.2159.1.3.2.4.1.1.1 gauge read-only
The row number for this row of the table.
                                   srcRouteInPortAccess 1.3.6.1.4.1.2159.1.3.2.4.1.1.2 displaystring read-only
FORMAT: Shows the input port access for 1 output port. Each instance is the output port number. Each 32 bit hex value displays the input port access for 32 ports. with port 32 on the left and port 0 on the right. Each bit is set for and enabled port, clear for a disabled one. For example 80000000 indicates input port 31 is enabled for this output port
                                   srcRouteOutPortAccess 1.3.6.1.4.1.2159.1.3.2.4.1.1.3 displaystring read-only
FORMAT: Shows the output port access for 1 input port. Each instance is the input port number. Each 32 bit hex value displays the output port access for 32 ports. with port 32 on the left and port 0 on the right. Each bit is set for and enabled port, clear for a disabled one. For example 80000000 indicates output port 31 is enabled for this input port
                           srcRouteWrite 1.3.6.1.4.1.2159.1.3.2.4.2 displaystring read-write
Setting this variable alters source routes. FORMAT: OutputPortList InputPortList Status. Output port is 0 to 31 Input port is 0 to 31 Status is 0 (disabled) or 1 (enabled) List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           srcSaveRestore 1.3.6.1.4.1.2159.1.3.2.4.3 integer read-write
This will save or restore all of the source routes. Writting a 0 is a no operation. Writting a 1 saves all source routes on the switch. Writting a 2 restores all source routes on the switch.
                       logicalAddressRoutes 1.3.6.1.4.1.2159.1.3.2.5
                           destRouteTable 1.3.6.1.4.1.2159.1.3.2.5.1 no-access
This table holds all of destination routes (logical address routes) for this switch. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 31 Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                               destRouteEntry 1.3.6.1.4.1.2159.1.3.2.5.1.1 no-access
A row in the destination route table.
                                   destIndex 1.3.6.1.4.1.2159.1.3.2.5.1.1.1 gauge read-only
The index for this row of the table.
                                   destRoute 1.3.6.1.4.1.2159.1.3.2.5.1.1.2 displaystring read-only
One Destination Route. FORMAT: LogicalAddress InputPortList Huntgroup. LogicalAddress is 0 to 4095. Input port is 0 to 31. Huntgroup is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           destRouteWrite 1.3.6.1.4.1.2159.1.3.2.5.2 displaystring read-write
Setting this variable will alter the desitination routes. FORMAT: LogicalAddressList Huntgroup InputPortList. LogicalAddress is 0 to 4095. Huntgroup is 0 to 31. 31 will disable this route. Input port is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           pathRouteTable 1.3.6.1.4.1.2159.1.3.2.5.3 no-access
This table holds all of pathway routes for this switch. FORMAT: PathwayAddressList InputPortList outputPort PathwaAddress is 0 to 4095. Input port is 0 to 31 outputPort is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                               pathRouteEntry 1.3.6.1.4.1.2159.1.3.2.5.3.1 no-access
A row in the pathway route table.
                                   pathIndex 1.3.6.1.4.1.2159.1.3.2.5.3.1.1 gauge read-only
The index for this row of the table.
                                   pathRoute 1.3.6.1.4.1.2159.1.3.2.5.3.1.2 displaystring read-only
One pathway logical address route. FORMAT: LogicalAddress InputPortList outputPort. LogicalAddress is 0 to 4095. Input port is 0 to 31. outputPort is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           pathRouteWrite 1.3.6.1.4.1.2159.1.3.2.5.4 displaystring read-write
Setting this variable will alter the pathway logical routes. FORMAT: LogicalAddressList Huntgroup InputPortList. LogicalAddress is 0 to 4095. Huntgroup is 0 to 31. 31 will disable this route. Input port is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           routesSaveRestore 1.3.6.1.4.1.2159.1.3.2.5.5 integer read-write
This saves and restores the route information. 0 is a no operation. 1 saves all destination routes on the switch. 2 restores all destination routes on the switch.
                           routeDisable 1.3.6.1.4.1.2159.1.3.2.5.6 displaystring read-write
Setting this variable will disable logical address routes. FORMAT: LogicalAddressList InputPortList. LogicalAddress is 0 to 4095 (0x0 to 0xfff). Input port is 0 to 31 (0x0 to 0x1f). List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                       huntGroups 1.3.6.1.4.1.2159.1.3.2.6
                           hGTable 1.3.6.1.4.1.2159.1.3.2.6.1 no-access
This table holds all of the huntgroups for this switch. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup.
                               hGEntry 1.3.6.1.4.1.2159.1.3.2.6.1.1 no-access
A row in the huntgroup table.
                                   hg 1.3.6.1.4.1.2159.1.3.2.6.1.1.1 gauge read-only
The huntgroup number.
                                   hgList 1.3.6.1.4.1.2159.1.3.2.6.1.1.2 displaystring read-only
The definition of one Huntgroup. FORMAT: Huntgroup ( OutportList ) Huntgroup is 0 to 31. OutportList is an orderd list of output ports in Huntgroup.
                           hgWrite 1.3.6.1.4.1.2159.1.3.2.6.2 displaystring read-write
Setting this variable will alter the huntgroup table by setting every huntgroup in list to include outPortList. FORMAT: HuntgroupList OutportList Huntgroup is 0 to 31. Outport is 0 to 31. List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
                           hgSaveRestore 1.3.6.1.4.1.2159.1.3.2.6.3 integer read-write
This saves and restores the hunt groups. 0 is a no operation. 1 saves all hunt group information on the switch. 2 restores all hunt group information on the switch.
                       switchEvents 1.3.6.1.4.1.2159.1.3.2.7
                             switchSensorWarning 1.3.6.1.4.1.2159.1.3.2.70.1
This warns that switch sensor(s) are changing status. One 32 bit hex values is returned and is ASCII encoded as follows: abcd where each character is a byte (8 bit value). a is the over temperature sensor. b, c, and d are power sensors 3 to 1 respectively. Each byte contains the following information: 0 (30 hex) Sensor is autodetectable, but it is not installed. 1 (32 hex) Sensor (if installed) has no problem 2 (33 hex) Sensor (if installed) has a sensor warning. 3-15 not defined. For example, the hex values 0021 means over temperature sensor is not installed, power supply sensor 3 is not installed, power supply sensor 2 has indicated power supply failure, and power supply 1 is ok.
               ecExperimental 1.3.6.1.4.1.2159.1.6