ERPS-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: ERPS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Q-BRIDGE-MIB, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swERPSMIB 1.3.6.1.4.1.171.12.78
The MIB module for managing Ethernet Ring Protection Switching.
       swERPSCtrl 1.3.6.1.4.1.171.12.78.1
           swERPSAdminState 1.3.6.1.4.1.171.12.78.1.1 integer read-write
This object indicates the ERPS state of the bridge. Enumeration: 'disabled': 2, 'enabled': 1.
           swERPSLogState 1.3.6.1.4.1.171.12.78.1.2 integer read-write
This object indicates the ERPS log state of the bridge. Enumeration: 'disabled': 2, 'enabled': 1.
           swERPSTrapState 1.3.6.1.4.1.171.12.78.1.3 integer read-write
This object indicates the ERPS trap state of the bridge. Enumeration: 'disabled': 2, 'enabled': 1.
       swERPSInfo 1.3.6.1.4.1.171.12.78.2
       swERPSMgmt 1.3.6.1.4.1.171.12.78.3
           swERPSMgmtRAPSVlanTable 1.3.6.1.4.1.171.12.78.3.1 no-access
This table contains the ERPS ring configuration information.
               swERPSMgmtRAPSVlanEntry 1.3.6.1.4.1.171.12.78.3.1.1 no-access
A list of the ERPS ring configuration information.
                   swERPSMgmtRAPSVlanId 1.3.6.1.4.1.171.12.78.3.1.1.1 integer read-only
The RAPS VLAN is an index of the configuration.
                   swERPSMgmtRAPSWestPort 1.3.6.1.4.1.171.12.78.3.1.1.2 integer read-write
This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel.
                   swERPSMgmtRAPSWestPortState 1.3.6.1.4.1.171.12.78.3.1.1.3 integer read-only
This is the west port state. The state may change occasionally. When the west port is configured on a virtual channel, the west port state is always forwarding. Enumeration: 'fowarding': 1, 'blocking': 2, 'signal-fail': 3.
                   swERPSMgmtRAPSEastPort 1.3.6.1.4.1.171.12.78.3.1.1.4 integer read-write
This is the other RPL owner port.The RPL Owner may block this port. The value 0 indicates the west port is a virtual channel.
                   swERPSMgmtRAPSEastPortState 1.3.6.1.4.1.171.12.78.3.1.1.5 integer read-only
This is the east port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding. Enumeration: 'fowarding': 1, 'blocking': 2, 'signal-fail': 3.
                   swERPSMgmtRAPSRPLPort 1.3.6.1.4.1.171.12.78.3.1.1.6 integer read-write
When the port enable state is enabled, the RPL port's current port role is defined by the ERPS application. Enumeration: 'west': 2, 'none': 1, 'east': 3.
                   swERPSMgmtRAPSRPLOwnerAdminState 1.3.6.1.4.1.171.12.78.3.1.1.7 integer read-write
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions. Enumeration: 'disabled': 2, 'enabled': 1.
                   swERPSMgmtRAPSProtectionVlan 1.3.6.1.4.1.171.12.78.3.1.1.8 vidlist read-write
The protection VLAN has prevented a loop.
                   swERPSMgmtRAPSRingMEL 1.3.6.1.4.1.171.12.78.3.1.1.9 integer read-write
The ring MEL is the maintenance entity group (MEG) level that provides a communication channel for the ring automatic protection switching (RAPS) information.
                   swERPSMgmtRAPSHoldOffTime 1.3.6.1.4.1.171.12.78.3.1.1.10 integer read-write
In order to coordinate the timing of protection switches at multiple layers.
                   swERPSMgmtRAPSGuardTime 1.3.6.1.4.1.171.12.78.3.1.1.11 integer read-write
This is used to prevent ring nodes from receiving outdated RAPS messages.
                   swERPSMgmtRAPSWTRTime 1.3.6.1.4.1.171.12.78.3.1.1.12 integer read-write
When revertive is enabled, this is used to prevent frequent operation of the protection switch due to an intermittent defect. A failed working transport entity must become stable in a fault-free state.
                   swERPSMgmtRAPSRingState 1.3.6.1.4.1.171.12.78.3.1.1.13 integer read-only
This indicates the state of the ring.The available states are: begin, init, idle, or protection. Enumeration: 'begin': 1, 'protection': 4, 'init': 2, 'idle': 3.
                   swERPSMgmtRAPSRingAdminState 1.3.6.1.4.1.171.12.78.3.1.1.14 integer read-write
This indicates the administrative state of the ring. Enumeration: 'disabled': 2, 'enabled': 1.
                   swERPSMgmtRAPSRPLOwnerOperStatus 1.3.6.1.4.1.171.12.78.3.1.1.15 integer read-only
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operating as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner administrative state is enabled, but the device is operating as the inactive RPL owner. The value 'disabled' is used to indicate that the RPL owner administrative state of the device is disabled. Enumeration: 'active': 1, 'disabled': 3, 'inactive': 2.
                   swERPSMgmtRAPSProtectionVlanRangeList1to64 1.3.6.1.4.1.171.12.78.3.1.1.16 octet string read-write
This object indicates the VLAN range (1-512) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList65to128 1.3.6.1.4.1.171.12.78.3.1.1.17 octet string read-write
This object indicates the VLAN range (513-1024) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList129to192 1.3.6.1.4.1.171.12.78.3.1.1.18 octet string read-write
This object indicates the VLAN range (1025-1536) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList193to256 1.3.6.1.4.1.171.12.78.3.1.1.19 octet string read-write
This object indicates the VLAN range (1537-2048) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList257to320 1.3.6.1.4.1.171.12.78.3.1.1.20 octet string read-write
This object indicates the VLAN range (2049-2560) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList321to384 1.3.6.1.4.1.171.12.78.3.1.1.21 octet string read-write
This object indicates the VLAN range (2561-3072) that belongs to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList385to448 1.3.6.1.4.1.171.12.78.3.1.1.22 octet string read-write
This object indicates the VLAN range (3073-3584) that belong to the protected VLANs.
                   swERPSMgmtRAPSProtectionVlanRangeList449to512 1.3.6.1.4.1.171.12.78.3.1.1.23 octet string read-write
This object indicates the VLAN range (3585-4096) that belong to the protected VLANs.
                   swERPSMgmtRAPSRevertive 1.3.6.1.4.1.171.12.78.3.1.1.24 integer read-write
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link. Enumeration: 'disabled': 2, 'enabled': 1.
                   swERPSMgmtRAPSOperWestPort 1.3.6.1.4.1.171.12.78.3.1.1.25 integer read-only
This object indicates actual running ring west port. The value 0 indicates the west port is a virtual channel.
                   swERPSMgmtRAPSOperEastPort 1.3.6.1.4.1.171.12.78.3.1.1.26 integer read-only
This object indicates actual running ring east port. The value 0 indicates the east port is a virtual channel.
                   swERPSMgmtRAPSOperRPLPort 1.3.6.1.4.1.171.12.78.3.1.1.27 integer read-only
This object indicates actual running ring RPL port. Enumeration: 'west': 2, 'none': 1, 'east': 3.
                   swERPSMgmtRAPSRPLOwnerOperState 1.3.6.1.4.1.171.12.78.3.1.1.28 integer read-only
This object indicates actual running RPL owner state. Enumeration: 'disabled': 2, 'enabled': 1.
                   swERPSMgmtRAPSRowStatus 1.3.6.1.4.1.171.12.78.3.1.1.100 rowstatus read-only
This object indicates the RowStatus of this entry.
           swERPSMgmtSubRingCtrlTable 1.3.6.1.4.1.171.12.78.3.2 no-access
This table contains the ERPS sub-ring configuration information.
               swERPSMgmtSubRingCtrlEntry 1.3.6.1.4.1.171.12.78.3.2.1 no-access
A list of the ERPS sub-ring configuration information.
                   swERPSMgmtSubRingCtrlRAPSVlanId 1.3.6.1.4.1.171.12.78.3.2.1.1 integer no-access
The RAPS VLAN is an index of the configuration.
                   swERPSMgmtSubRingCtrlSubRingRAPSVlanId 1.3.6.1.4.1.171.12.78.3.2.1.2 integer no-access
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
                   swERPSMgmtSubRingCtrlTCPropagationState 1.3.6.1.4.1.171.12.78.3.2.1.3 integer read-write
This indicates the state of the sub-ring topology change propagation. Enumeration: 'disabled': 2, 'enabled': 1.
                   swERPSMgmtSubRingCtrlRowStatus 1.3.6.1.4.1.171.12.78.3.2.1.4 rowstatus read-only
This object indicates the status of this entry.
       swERPSNotify 1.3.6.1.4.1.171.12.78.4
           swERPSNotifyPrefix 1.3.6.1.4.1.171.12.78.4.0
               swERPSSFDetectedTrap 1.3.6.1.4.1.171.12.78.4.0.1
When a signal failure occurs, a trap will be generated.
               swERPSSFClearedTrap 1.3.6.1.4.1.171.12.78.4.0.2
When the signal failure clears, a trap will be generated.
               swERPSRPLOwnerConflictTrap 1.3.6.1.4.1.171.12.78.4.0.3
When a conflict occurs, a trap will be generated.
           swERPSNotificationBindings 1.3.6.1.4.1.171.12.78.4.2
               swERPSNodeId 1.3.6.1.4.1.171.12.78.4.2.1 macaddress no-access
This used trap object means the node MAC.