ELTEX-MES-ULD-MIB: View SNMP OID List / Download MIB

VENDOR: ELTEX ENTERPRISE


 Home MIB: ELTEX-MES-ULD-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ELTEX-MES, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eltMesULDMIB 1.3.6.1.4.1.35265.1.23.1.87
The unidirectioanl link detection module MIB.
       eltMesULDNotifications 1.3.6.1.4.1.35265.1.23.1.87.0
           eltULDLinkStatusChanged 1.3.6.1.4.1.35265.1.23.1.87.0.1
A eltULDLinkStatusChanged notification is sent when a local link status has been changed. This event should not be sent more then one per second.
       eltMesULDMgmt 1.3.6.1.4.1.35265.1.23.1.87.1
           eltULDTable 1.3.6.1.4.1.35265.1.23.1.87.1.1 no-access
The management information of the unidirectional link detection.
               eltULDEntry 1.3.6.1.4.1.35265.1.23.1.87.1.1.1 no-access
A list of information contained in eltULDTable.
                   eltULDAdminState 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.1 integer read-write
This object indicates the unidirectional link detection configuration status. Enumeration: 'disabled': 2, 'enabled': 1.
                   eltULDOperStatus 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.2 integer read-only
This object is determined by local and remote port supporting OAM and unidirectional detection. If both local and remote port support OAM and unidirectional detection, it is enabled(1),else it is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                   eltULDMode 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.3 integer read-write
This object indicates the mode for unidirectional link detection. shutdown: if any unidirectional link is detected, disable the port and log an event. normal: only log an event when a unidirectional link is detected. Enumeration: 'err-disable': 2, 'log': 1.
                   eltULDDiscoveryTime 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.4 integer read-write
This object indicates the neighbor discovery time for unidirectional link detection. If the discovery time ends, the unidirectional link detection starts.
                   eltULDIsAggressive 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.5 truthvalue read-write
This object indicates the mode for unidirectional link detection protocol. If true then port is considered to be UNIDIRECTIONAL if there is no answer from remote side during discovery timeout. If false then port is considered to be UNKNOWN.
                   eltULDLinkStatus 1.3.6.1.4.1.35265.1.23.1.87.1.1.1.6 integer read-only
This object indicates the link status, which is a result of unidirectional link detection. Enumeration: 'bidirectional': 3, 'unknown': 1, 'neighbor-mismatch': 5, 'unidirectional': 2, 'tx-rx-loop': 4.