EKINOPS-MGNT2-NMS-MIB: View SNMP OID List / Download MIB

VENDOR: EKINOPS SAS


 Home MIB: EKINOPS-MGNT2-NMS-MIB
Download as:   
SNMPv2-CONF, EKINOPS-MIB, SNMPv2-SMI, SNMPv2-TM, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mgnt2NMS 1.3.6.1.4.1.20044.1000
MIB for managing Ekinops 360 Network Element via a NMS.
           mgnt2NMSMibObject 1.3.6.1.4.1.20044.1000.1
               mgnt2ActiveAlmTable 1.3.6.1.4.1.20044.1000.1.1 no-access
This table defines the MGNT2-NMS Active Alarm table This table is used by Agent in order to store the active alarms, managing system can only read them.
                   mgnt2ActiveAlmEntry 1.3.6.1.4.1.20044.1000.1.1.1 no-access
Information about a single alarm in the Active Alarm table. Entries in this table are created by SNMP NE and will be automatically deleted by SNMP NE when it is genereted a cleared-alarm.
                       mgnt2ActiveAlmNotificationId 1.3.6.1.4.1.20044.1000.1.1.1.1 mgnt2notificationid read-only
See textual conventions.
                       mgnt2ActiveAlmProbableCause 1.3.6.1.4.1.20044.1000.1.1.1.2 mgnt2almprobablecause read-only
See textual conventions.
                       mgnt2ActiveAlmObjectClassIdentifier 1.3.6.1.4.1.20044.1000.1.1.1.3 mgnt2objectclassid read-only
See textual conventions.
                       mgnt2ActiveAlmSourcePm 1.3.6.1.4.1.20044.1000.1.1.1.4 displaystring read-only
See textual conventions.
                       mgnt2ActiveAlmBoardNumber 1.3.6.1.4.1.20044.1000.1.1.1.5 integer32 read-only
See textual conventions.
                       mgnt2ActiveAlmSourcePortType 1.3.6.1.4.1.20044.1000.1.1.1.6 displaystring read-only
This OID gives the type of the port who sent a trap
                       mgnt2ActiveAlmSourcePortNumber 1.3.6.1.4.1.20044.1000.1.1.1.7 integer32 read-only
This OID gives the port number of the PM that sent the last trap
                       mgnt2ActiveAlmSeverity 1.3.6.1.4.1.20044.1000.1.1.1.8 mgnt2almseverity read-only
See textual conventions.
                       mgnt2ActiveAlmSpecificProblem 1.3.6.1.4.1.20044.1000.1.1.1.9 displaystring read-only
This object contains the alarm specific problem description. Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by <;> characters. The format of the displayString is for further study.
                       mgnt2ActiveAlmAdditionalText 1.3.6.1.4.1.20044.1000.1.1.1.10 displaystring read-only
                       mgnt2ActiveAlmType 1.3.6.1.4.1.20044.1000.1.1.1.11 mgnt2almtype read-only
See textual convention
                       mgnt2ActiveAlmTime 1.3.6.1.4.1.20044.1000.1.1.1.12 dateandtime read-only
This object indicates when the alarm has been generated.
                       mgnt2ActiveAlmNodeControllerIpAddress 1.3.6.1.4.1.20044.1000.1.1.1.13 ipaddress read-only
This OID gives the IP address of the Node Controller
                       mgnt2ActiveAlmChassisId 1.3.6.1.4.1.20044.1000.1.1.1.14 displaystring read-only
This OID gives the chassis ID
               mgnt2AlmLogTable 1.3.6.1.4.1.20044.1000.1.2 no-access
This table defines the Alarm Log table. It is used to store the alarms generated by SNMP NE.
                   mgnt2AlmLogEntry 1.3.6.1.4.1.20044.1000.1.2.1 no-access
Each entry contains information about single alarm notification. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one.
                       mgnt2AlmLogNotificationId 1.3.6.1.4.1.20044.1000.1.2.1.1 mgnt2notificationid read-only
See textual conventions.
                       mgnt2AlmLogProbableCause 1.3.6.1.4.1.20044.1000.1.2.1.2 mgnt2almprobablecause read-only
See textual conventions.
                       mgnt2AlmLogObjectClassIdentifier 1.3.6.1.4.1.20044.1000.1.2.1.3 mgnt2objectclassid read-only
See textual conventions.
                       mgnt2AlmLogSourcePm 1.3.6.1.4.1.20044.1000.1.2.1.4 displaystring read-only
See textual conventions.
                       mgnt2AlmLogBoardNumber 1.3.6.1.4.1.20044.1000.1.2.1.5 integer32 read-only
See textual conventions.
                       mgnt2AlmLogSourcePortType 1.3.6.1.4.1.20044.1000.1.2.1.6 displaystring read-only
This OID gives the type of the port who sent a trap
                       mgnt2AlmLogSourcePortNumber 1.3.6.1.4.1.20044.1000.1.2.1.7 integer32 read-only
This OID gives the port number of the PM that sent the last trap
                       mgnt2AlmLogSeverity 1.3.6.1.4.1.20044.1000.1.2.1.8 mgnt2almseverity read-only
The perceived severity of the alarm, as specified by the agent that generated it.
                       mgnt2AlmLogSpecificProblem 1.3.6.1.4.1.20044.1000.1.2.1.9 displaystring read-only
See textual conventions. This object is only present if it was included in the alarm trap corresponding to this AlarmLog entry.
                       mgnt2AlmLogAdditionalText 1.3.6.1.4.1.20044.1000.1.2.1.10 displaystring read-only
                       mgnt2AlmLogAlarmType 1.3.6.1.4.1.20044.1000.1.2.1.11 mgnt2almtype read-only
                       mgnt2AlmLogTime 1.3.6.1.4.1.20044.1000.1.2.1.13 dateandtime read-only
This object indicates when the alarm has been generated.
                       mgnt2AlmLogNodeControllerIpAddress 1.3.6.1.4.1.20044.1000.1.2.1.14 ipaddress read-only
This OID gives the IP address of the Node Controller
                       mgnt2AlmLogChassisId 1.3.6.1.4.1.20044.1000.1.2.1.15 displaystring read-only
This OID gives the chassis ID
               mgnt2EventLogTable 1.3.6.1.4.1.20044.1000.1.3 no-access
This table contain information about single event notification not alarm. Entries in this table are created automatically by Agent and they are never deleted because the Log behavior is automatically set to Wrap, hence when no more entry will be created (log full) new log entry will cause the deletion of the oldest one.
                   mgnt2EventLogEntry 1.3.6.1.4.1.20044.1000.1.3.1 no-access
An entry in the mgnt2EventLogTable
                       mgnt2EventLogNotificationId 1.3.6.1.4.1.20044.1000.1.3.1.1 mgnt2notificationid read-only
See textual conventions.
                       mgnt2EventLogObjectClassIdentifier 1.3.6.1.4.1.20044.1000.1.3.1.2 mgnt2objectclassid read-only
See textual conventions.
                       mgnt2EventLogSourcePm 1.3.6.1.4.1.20044.1000.1.3.1.4 displaystring read-only
See textual conventions.
                       mgnt2EventLogBoardNumber 1.3.6.1.4.1.20044.1000.1.3.1.5 integer32 read-only
See textual conventions.
                       mgnt2EventLogSourcePortType 1.3.6.1.4.1.20044.1000.1.3.1.6 displaystring read-only
This OID gives the type of the port who sent a trap
                       mgnt2EventLogSourcePortNumber 1.3.6.1.4.1.20044.1000.1.3.1.7 integer32 read-only
This OID gives the port number of the PM that sent the last trap
                       mgnt2EventLogEventType 1.3.6.1.4.1.20044.1000.1.3.1.8 mgnt2eventtype read-only
This object describes the type of the event logged.
                       mgnt2EventLogSourceType 1.3.6.1.4.1.20044.1000.1.3.1.9 mgnt2eventsourcetype read-only
This object describes the source type of the event logged.
                       mgnt2EventLogReason 1.3.6.1.4.1.20044.1000.1.3.1.10 displaystring read-only
                       mgnt2EventLogAdditionalText 1.3.6.1.4.1.20044.1000.1.3.1.11 displaystring read-only
                       mgnt2EventLogTime 1.3.6.1.4.1.20044.1000.1.3.1.12 dateandtime read-only
This object indicates when the event has been generated.
                       mgnt2EventLogNodeControllerIpAddress 1.3.6.1.4.1.20044.1000.1.3.1.13 ipaddress read-only
This OID gives the IP address of the Node Controller
                       mgnt2EventLogChassisId 1.3.6.1.4.1.20044.1000.1.3.1.14 displaystring read-only
This OID gives the chassis ID
               mgnt2UploadDownload 1.3.6.1.4.1.20044.1000.1.5
                   mgnt2UploadDownloadFilename 1.3.6.1.4.1.20044.1000.1.5.1 displaystring read-write
software file name including eventually file path
                   mgnt2UploadDownloadAddress 1.3.6.1.4.1.20044.1000.1.5.2 mgnt2serveraddress read-write
See textual convention
                   mgnt2UploadDownloadLogin 1.3.6.1.4.1.20044.1000.1.5.3 displaystring read-write
Login for ftp
                   mgnt2UploadDownloadPasswd 1.3.6.1.4.1.20044.1000.1.5.4 displaystring read-write
Password for ftp. A manager sets this value with ftp account password using SNMP. For security reasons if a manager reads this entry, NE must return an empty string (instead of password).
                   mgnt2UploadDownloadTxRetries 1.3.6.1.4.1.20044.1000.1.5.5 integer32 read-write
Communication retries between the Client and Server. <0> denotes one (first) transmission and no retries in case of failure no re-transmissions are required.
                   mgnt2UploadDownloadActionStatus 1.3.6.1.4.1.20044.1000.1.5.6 mgnt2uploaddownloadactionstatus read-write
Entry used to know status of upload/ download to start upload/download operation (Action)
                   mgnt2UploadDownloadErrorCode 1.3.6.1.4.1.20044.1000.1.5.7 mgnt2uploaddownloaderrorcode read-only
See textual convention
                   mgnt2UploadDownloadDirection 1.3.6.1.4.1.20044.1000.1.5.8 integer32 read-write
FTP direction : 0 : From NE to external server 1 : From external server to NE
                   mgnt2UploadDownloadProgress 1.3.6.1.4.1.20044.1000.1.5.9 integer32 read-write
Percentage of software file(s) downloaded. Only significant in case mgnt2UploadDownloadActionStatus is 'inProgress' or 'automatic'
                   mgnt2UploadDownloadReceivedFiles 1.3.6.1.4.1.20044.1000.1.5.10 integer32 read-write
Number of files received during upload/download (significant when status is 'automatic')
                   mgnt2UploadDownloadRemainingFiles 1.3.6.1.4.1.20044.1000.1.5.11 integer32 read-write
Number of files remaining for upload/download (significant when status is 'automatic')
                   mgnt2UploadDownloadFileType 1.3.6.1.4.1.20044.1000.1.5.12 mgnt2downloadfiletype read-write
File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile
                   mgnt2UploadDownloadFileCompression 1.3.6.1.4.1.20044.1000.1.5.13 mgnt2uploaddownloadfilecompression read-write
See Textual convention
                   mgnt2UploadDownloadDeleteLastFile 1.3.6.1.4.1.20044.1000.1.5.14 ekionoff read-write
               mgnt2Configuration 1.3.6.1.4.1.20044.1000.1.6
                   mgnt2ConfigurationChecksum 1.3.6.1.4.1.20044.1000.1.6.1 displaystring no-access
Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM)
                   mgnt2ConfigurationActionStatus 1.3.6.1.4.1.20044.1000.1.6.2 integer32 read-write
0 : activate 1 : activated 2 : failed
                   mgnt2ConfigurationActivationErrorCode 1.3.6.1.4.1.20044.1000.1.6.3 integer32 read-only
0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file
                   mgnt2ConfigurationActivationErrorString 1.3.6.1.4.1.20044.1000.1.6.4 displaystring read-only
String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given
               mgnt2SoftwareDownload 1.3.6.1.4.1.20044.1000.1.7
                   mgnt2SoftwareDownloadActionStatus 1.3.6.1.4.1.20044.1000.1.7.2 integer32 read-write
0 : activate 1 : downgrade 2 : abort 3 : activated 4 : downgraded 5 : failed
                   mgnt2SoftwareDownloadActivationErrorCode 1.3.6.1.4.1.20044.1000.1.7.3 integer32 read-only
0 : noError 1 : badValue 2 : missingFile 3 : emptyFile 4 : wrong file
                   mgnt2SoftwareDownloadActivationErrorString 1.3.6.1.4.1.20044.1000.1.7.4 displaystring read-only
String explaining Error code. For example, in case of bad value(s), faulty parameter(s) name(s) are given
                   mgnt2SoftwareDownloadActivationSlotNumber 1.3.6.1.4.1.20044.1000.1.7.5 integer32 read-write
                   mgnt2SoftwareDownloadActivationClearFile 1.3.6.1.4.1.20044.1000.1.7.6 integer32 read-write
0 : keepfile 1 : clearfile
                   mgnt2SoftwareDownloadActivationFilename 1.3.6.1.4.1.20044.1000.1.7.7 displaystring read-write
software file name including eventually file path
                   mgnt2SoftwareDownloadActivationAutoRestart 1.3.6.1.4.1.20044.1000.1.7.8 integer32 read-write
0 : norestart 1 : autorestart
                   mgnt2SoftwareDownloadActivationFileType 1.3.6.1.4.1.20044.1000.1.7.9 mgnt2downloadfiletype read-write
File type to download/upload : - 0 : pmPackage - 1 : mgntPackage - 2 : configurationFile - 3 : logFile - 4 : perfFile
               mgnt2LacTable 1.3.6.1.4.1.20044.1000.1.8 no-access
The MGNT2 Local Access control table. This table is used to give access to the Craft Terminals or/and NMS.
                   mgnt2LacEntry 1.3.6.1.4.1.20044.1000.1.8.1 no-access
Entry is automatically created by Agent at start-up time.
                       mgnt2LacIndex 1.3.6.1.4.1.20044.1000.1.8.1.1 integer32 read-only
This is the index for the Local Access Control table.
                       mgnt2LacState 1.3.6.1.4.1.20044.1000.1.8.1.2 mgnt2lacstate read-write
See textual convention
                       mgnt2LacNoResponseTimeOutPeriod 1.3.6.1.4.1.20044.1000.1.8.1.3 integer32 read-write
This is the No Response TimeOut Period attribute for the Local Access Control.
               mgnt2PolledInfo 1.3.6.1.4.1.20044.1000.1.10
                     mgnt2PolledInfoLastAlarmNotificationId 1.3.6.1.4.1.20044.1000.1.10.1 counter32 read-only
This object contains the notification identifier of the last alarm stored inside AlarmLog.
                     mgnt2PolledInfoLastEventNotificationId 1.3.6.1.4.1.20044.1000.1.10.2 counter32 read-only
This object contains the notification identifier of the last Event stored inside EventLog.
                     mgnt2PolledInfoConfigurationChecksum 1.3.6.1.4.1.20044.1000.1.10.3 displaystring read-only
Entry used to identify uniquely configuration file content. (Used to check alignement between NE configuration and configuration known by NM)
               mgnt2TrapNMSAlarm 1.3.6.1.4.1.20044.1000.1.11
This notification reports Alarm event.
               mgnt2TrapNMSEvent 1.3.6.1.4.1.20044.1000.1.12
This notification reports an Event.
           mgnt2SupportMCConf 1.3.6.1.4.1.20044.1000.2
               mgnt2SupportMCCompl 1.3.6.1.4.1.20044.1000.2.1
                   mgnt2SupportMc 1.3.6.1.4.1.20044.1000.2.1.1
This module compliance describes a set of objects required for MGNT2-NMS SNMP Agent implementation.
                   mgnt2ActiveAlmGroup 1.3.6.1.4.1.20044.1000.2.1.2
This group describes the mandatory objects needed for the Active Alarm management configuration.
                   mgnt2AlmLogGroup 1.3.6.1.4.1.20044.1000.2.1.3
This group describes the mandatory objects needed for the Alarm log management configuration.
                   mgnt2EventLogGroup 1.3.6.1.4.1.20044.1000.2.1.4
This group describes the mandatory objects needed for the Event log management configuration.
               mgnt2SupportMCGroup 1.3.6.1.4.1.20044.1000.2.2