EFDATA-SPECTRACAST-DR5000-MIB: View SNMP OID List / Download MIB

VENDOR: COMTECH EFDATA CORPORATION


 Home MIB: EFDATA-SPECTRACAST-DR5000-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 efdata 1.3.6.1.4.1.6247
           spectracast 1.3.6.1.4.1.6247.3
               dr5000 1.3.6.1.4.1.6247.3.2
                   general 1.3.6.1.4.1.6247.3.2.1
                       softwareVersion 1.3.6.1.4.1.6247.3.2.1.1 displaystring read-only
Software Version (read only).
                       hardwareVersion 1.3.6.1.4.1.6247.3.2.1.2 displaystring read-only
Hardware Version (read only).
                       macAddress 1.3.6.1.4.1.6247.3.2.1.3 displaystring read-only
MAC address (read only).
                       multicastRoutingStatus 1.3.6.1.4.1.6247.3.2.1.4 displaystring read-only
Multicast routing status (read only).
                   rfparameters 1.3.6.1.4.1.6247.3.2.2
                       rf_Input 1.3.6.1.4.1.6247.3.2.2.1 displaystring read-write
RF Input frequency (MHz) (read-write).
                       lnb_Frequency 1.3.6.1.4.1.6247.3.2.2.2 displaystring read-write
LNB frequency (GHz) (read-write).
                       symbolRate 1.3.6.1.4.1.6247.3.2.2.3 displaystring read-write
Symbol rate (Msps) (read-write).
                       polarity 1.3.6.1.4.1.6247.3.2.2.4 integer read-write
Polarity may take values: Disabled(0), Vertical(14) or Horizontal(18) (read-write). Enumeration: 'disabled': 0, 'horizontal': 18, 'vertical': 14.
                       frequencyRange 1.3.6.1.4.1.6247.3.2.2.5 integer read-write
Frequency range may take values: Low(0) or High(1) (read-write). Enumeration: 'high': 1, 'low': 0.
                   dvbparameters 1.3.6.1.4.1.6247.3.2.3
                       pids_number 1.3.6.1.4.1.6247.3.2.3.1 integer read-only
Number of PIDs in the list (read only).
                       pidTable 1.3.6.1.4.1.6247.3.2.3.2 no-access
List of PID entries. The number of entries is given by PIDs-number value.
                           pidEntry 1.3.6.1.4.1.6247.3.2.3.2.1 no-access
PID entry containing objects for the particular PID.
                               pidindex 1.3.6.1.4.1.6247.3.2.3.2.1.1 integer read-only
Unique ID for each PID, ranges between 1 and PIDs-number (read-only).
                               pidvalue 1.3.6.1.4.1.6247.3.2.3.2.1.2 integer read-write
Unique PID value (read-write).
                   ccuparameters 1.3.6.1.4.1.6247.3.2.4
                       ccuConnectionMode 1.3.6.1.4.1.6247.3.2.4.1 integer read-write
CCU connection mode, may take values: Manual(0), Duplex(1) or Simplex(2) (read-write). Enumeration: 'duplex': 1, 'manual': 0, 'simplex': 2.
                       ccuIpAddress 1.3.6.1.4.1.6247.3.2.4.2 ipaddress read-write
CCU IP Address (read-write).
                       ccuUserName 1.3.6.1.4.1.6247.3.2.4.3 displaystring read-write
User name for connecting to the CCU (write only).
                       ccuPassword 1.3.6.1.4.1.6247.3.2.4.4 displaystring read-write
Password for connecting to the CCU (write only).
                       encryptedMulticast 1.3.6.1.4.1.6247.3.2.4.5 integer read-write
Set to Enabled in order to receive encrypted multicast. Enumeration: 'disabled': 0, 'enabled': 1.
                   dialupparameters 1.3.6.1.4.1.6247.3.2.5
                       connectionMode 1.3.6.1.4.1.6247.3.2.5.1 integer read-write
Connection Mode, may take values: Manual(0) or Automatic(1) (read-write). Enumeration: 'automatic': 1, 'manual': 0.
                       phoneNumber 1.3.6.1.4.1.6247.3.2.5.2 integer read-write
ISP Phone number, accepts only digits (read-write).
                       userName 1.3.6.1.4.1.6247.3.2.5.3 displaystring read-write
User name for dialup connection (write only).
                       password 1.3.6.1.4.1.6247.3.2.5.4 displaystring read-write
Password for dialup connection (write only).
                       dialTone 1.3.6.1.4.1.6247.3.2.5.5 integer read-write
Dialing mode, may take values: Tone(0)) or Pulse(1) (read-write). Enumeration: 'tone': 0, 'pulse': 1.
                       speed 1.3.6.1.4.1.6247.3.2.5.7 integer read-write
Modem connection speed, may take values: 9600, 19200, 38400, 57600 or 115200 (read-write).
                       idleTimeOut 1.3.6.1.4.1.6247.3.2.5.8 integer read-write
Dial on demand time out in minutes. Set to 0 in order to disable dial on demand (read-write).
                       authentication 1.3.6.1.4.1.6247.3.2.5.9 integer read-write
Authentication mode, may take values: PAP or CHAP (read-write). Enumeration: 'pap': 0, 'chap': 1.
                   status 1.3.6.1.4.1.6247.3.2.6
                       initializationStatus 1.3.6.1.4.1.6247.3.2.6.1 displaystring read-only
Card initialization status (read only).
                       demodulatorStatus 1.3.6.1.4.1.6247.3.2.6.2 displaystring read-only
Current demodulator status (read only).
                       spectralInversion 1.3.6.1.4.1.6247.3.2.6.3 displaystring read-only
Spectral inversion (read only).
                       ber_before_Err_Correction 1.3.6.1.4.1.6247.3.2.6.4 displaystring read-only
BER before error correction (read only).
                       fec 1.3.6.1.4.1.6247.3.2.6.5 displaystring read-only
FEC (read only).
                       agc 1.3.6.1.4.1.6247.3.2.6.6 displaystring read-only
Gain value set by AGC (Db) (read only).
                       frequencyOffset 1.3.6.1.4.1.6247.3.2.6.7 displaystring read-only
Frequency offset (read only).
                       eb_N0 1.3.6.1.4.1.6247.3.2.6.8 displaystring read-only
Eb/N0 (read only).
                       ccu_connection_status 1.3.6.1.4.1.6247.3.2.6.9 integer read-only
CCU connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2), Waiting for Dialup(3), or Waiting for RF Lock(4) (read only). Enumeration: 'waitingfordialup': 3, 'connected': 1, 'disconnected': 0, 'waitingforrflock': 4, 'tryingtoconnect': 2.
                       dialup_connection_status 1.3.6.1.4.1.6247.3.2.6.10 integer read-only
Dialup connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2) or Idle(10) (read only). Enumeration: 'idle': 10, 'connected': 1, 'disconnected': 0, 'tryingtoconnect': 2.
                   flowStatistics 1.3.6.1.4.1.6247.3.2.7
                       totalThroughput 1.3.6.1.4.1.6247.3.2.7.1 displaystring read-only
Total throughput in bytes/sec. (read only).
                       unicastThroughput 1.3.6.1.4.1.6247.3.2.7.2 displaystring read-only
Unicast throughput in bytes/sec. (read only).
                       multicastThroughput 1.3.6.1.4.1.6247.3.2.7.3 displaystring read-only
Multicast throughput in bytes/sec. (read only).
                       totalPackets 1.3.6.1.4.1.6247.3.2.7.4 displaystring read-only
Total packets received since reset (read only).
                       badPackets 1.3.6.1.4.1.6247.3.2.7.5 displaystring read-only
Bad RS packets (read only).
                       correctedPackets 1.3.6.1.4.1.6247.3.2.7.6 displaystring read-only
Corrected RS packets (read only).
                       resetFlowStatistics 1.3.6.1.4.1.6247.3.2.7.7 integer read-write
Set to True in order to reset flow statistics. Enumeration: 'true': 1, 'false': 0.
                   maintenance 1.3.6.1.4.1.6247.3.2.8
                       driverRestart 1.3.6.1.4.1.6247.3.2.8.1 integer read-write
Set to True in order to restart the Driver. Enumeration: 'true': 1, 'false': 0.
                       dialupConnect 1.3.6.1.4.1.6247.3.2.8.2 integer read-write
Set to True in order to dial your ISP. Enumeration: 'true': 1, 'false': 0.
                       dialupDisconnect 1.3.6.1.4.1.6247.3.2.8.3 integer read-write
Set to true in order to disconnect from your ISP. Enumeration: 'true': 1, 'false': 0.
                       ccuconnect 1.3.6.1.4.1.6247.3.2.8.4 integer read-write
Set to True in order to connect to the CCU. Enumeration: 'true': 1, 'false': 0.
                       ccudisconnect 1.3.6.1.4.1.6247.3.2.8.5 integer read-write
Set to True in order to disconnect from the CCU. Enumeration: 'true': 1, 'false': 0.
                       upgrade 1.3.6.1.4.1.6247.3.2.8.6 displaystring read-write
Set to the upgrade file name, and upgrade the system. After upgrade finishes the system reboots automatically (write only).
                   snmpVariables 1.3.6.1.4.1.6247.3.2.9
                       enableTraps 1.3.6.1.4.1.6247.3.2.9.1 integer read-write
Set to True in order to start getting traps. Enumeration: 'enable': 1, 'disable': 0.
                       snmpManagerIP 1.3.6.1.4.1.6247.3.2.9.2 ipaddress read-write
IP address of SNMP manager where traps have to be sent to (read-write).
                       trapPeriod 1.3.6.1.4.1.6247.3.2.9.3 integer read-write
Trap sending period in seconds (read-write).
                       trapList 1.3.6.1.4.1.6247.3.2.9.4
                           multicastDaemon 1.3.6.1.4.1.6247.3.2.9.4.1
                               multicastTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.1.1 integer read-write
Use multicast daemon status trap. A trap message is sent when multicast daemon goes down (read-write). Enumeration: 'enable': 1, 'disable': 0.
                           demodulator 1.3.6.1.4.1.6247.3.2.9.4.2
                               demodulatorTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.2.1 integer read-write
Use demodulator status trap. A trap message is sent when the demodulator loses data lock (read-write). Enumeration: 'enable': 1, 'disable': 0.
                           ccuConnection 1.3.6.1.4.1.6247.3.2.9.4.3
                               ccuTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.3.1 integer read-write
Use CCU connection status trap. A trap message is sent when CCU status changes from Connected to any other one (read-write). Enumeration: 'enable': 1, 'disable': 0.
                           dialup 1.3.6.1.4.1.6247.3.2.9.4.4
                               dialupTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.4.1 integer read-write
Use dialup connection status trap. A trap message is sent when dialup status changes from Connected to any other one except Idle (read-write). Enumeration: 'enable': 1, 'disable': 0.
                           berLevel 1.3.6.1.4.1.6247.3.2.9.4.5
                               berTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.5.1 integer read-write
Use BER level trap. A trap message is sent when BER value is greater then BER trap threshold (read-write). Enumeration: 'enable': 1, 'disable': 0.
                               berThreshold 1.3.6.1.4.1.6247.3.2.9.4.5.2 octet string read-write
BER level threshold value (read-write).
                           freqOffset 1.3.6.1.4.1.6247.3.2.9.4.6
                               freqOffsetTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.6.1 integer read-write
Use frequency offset trap. A trap message is sent when absolute frequency offset is greater then frequency offset trap threshold (read-write). Enumeration: 'enable': 1, 'disable': 0.
                               freqOffsetThreshold 1.3.6.1.4.1.6247.3.2.9.4.6.2 octet string read-write
Frequency offset threshold value (read-write).
                           agcLevel 1.3.6.1.4.1.6247.3.2.9.4.7
                               agcTrapEnable 1.3.6.1.4.1.6247.3.2.9.4.7.1 integer read-write
Use AGC level trap. A trap message is sent when gain value is greater then AGC trap threshold (read-write). Enumeration: 'enable': 1, 'disable': 0.
                               agcThreshold 1.3.6.1.4.1.6247.3.2.9.4.7.2 octet string read-write
AGC threshold value (read-write)