ECLAPBEXT-MIB: View SNMP OID List / Download MIB

VENDOR: EICON


 Home MIB: ECLAPBEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eicon 1.3.6.1.4.1.434
         management 1.3.6.1.4.1.434.2
             mibv2 1.3.6.1.4.1.434.2.2
                 module 1.3.6.1.4.1.434.2.2.4
                     lapbext 1.3.6.1.4.1.434.2.2.4.1
                         lapbCountersTable 1.3.6.1.4.1.434.2.2.4.1.1 no-access
Runtime counters table, one row per port
                             lapbCountEntry 1.3.6.1.4.1.434.2.2.4.1.1.1 no-access
The set of counters for one port. Can be reset to 0.
                                 lapbCountPortRef 1.3.6.1.4.1.434.2.2.4.1.1.1.1 integer read-only
The port number, the same as lapbParmPortRef from the lapbParmTable.
                                 lapbCountRetransmis 1.3.6.1.4.1.434.2.2.4.1.1.1.2 counter read-only
The number of times a frame has been retransmitted
                                 lapbCountSABMTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.3 counter read-only
The number of Set Asynchronous Balanced Mode frames sent
                                 lapbCountSABMRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.4 counter read-only
The number of Set Asynchronous Balanced Mode frames received
                                 lapbCountDISCTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.5 counter read-only
The number of Disconnect frames sent
                                 lapbCountDISCRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.6 counter read-only
The number of Disconnect frames received
                                 lapbCountDMsTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.7 counter read-only
The number of Disconnected Mode frames sent
                                 lapbCountDMsRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.8 counter read-only
The number of Disconnected Mode frames received
                                 lapbCountRNRsTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.9 counter read-only
The number of Receiver Not Ready frames sent
                                 lapbCountRNRsRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.10 counter read-only
The number of Receiver Not Ready frames received
                                 lapbCountUATxs 1.3.6.1.4.1.434.2.2.4.1.1.1.11 counter read-only
The number of Unnumbered Acknowledgement frames transmitted.
                                 lapbCountUARxs 1.3.6.1.4.1.434.2.2.4.1.1.1.12 counter read-only
The number of Unnumbered Acknowledgement frames received.
                                 lapbCountRRTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.13 counter read-only
The number of Receiver Ready frames transmitted.
                                 lapbCountRRRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.14 counter read-only
The number of Receiver Ready frames received.
                                 lapbCountFRMRTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.15 counter read-only
The number of Frame Reject frames sent.
                                 lapbCountFRMRRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.16 counter read-only
The number of Frame Reject frames received.
                                 lapbCountBadCRCTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.17 counter read-only
The number of frames sent with bad CRC.
                                 lapbCountBadCRCRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.18 counter read-only
The number of frames received with bad CRC.
                                 lapbCountAbortTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.19 counter read-only
The number of frames sent with Abort indication.
                                 lapbCountAbortRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.20 counter read-only
The number of frames received with Abort indication.
                                 lapbCountBadTypeTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.21 counter read-only
The number of Unknown frames sent.
                                 lapbCountBadTypeRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.22 counter read-only
The number of Unknown frames received.
                                 lapbCountInfoFrameTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.23 counter read-only
The number of Information frames sent.
                                 lapbCountInfoFrameRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.24 counter read-only
The number of Information frames received.
                                 lapbCountUnderrun 1.3.6.1.4.1.434.2.2.4.1.1.1.25 counter read-only
The number of times that more frames have been transmitted than the receiver can handle.
                                 lapbCountOverrun 1.3.6.1.4.1.434.2.2.4.1.1.1.26 counter read-only
The number of times that the EiconCard could not handle incoming frames.
                                 lapbCountXIDTxs 1.3.6.1.4.1.434.2.2.4.1.1.1.27 counter read-only
The number of Exchange Station Identification frames sent.
                                 lapbCountXIDRxs 1.3.6.1.4.1.434.2.2.4.1.1.1.28 counter read-only
The number of Exchange Station Identification frames received.
                         lapbBandwidthTable 1.3.6.1.4.1.434.2.2.4.1.2 no-access
The table of configurable and informational parameters with respect to the bandwidth traps for lapb interfaces
                             lapbBandwidthEntry 1.3.6.1.4.1.434.2.2.4.1.2.1 no-access
The set of configurable and informational parameters to support the bandwidth traps for each lapb interface
                                 lapbBandwidthIndex 1.3.6.1.4.1.434.2.2.4.1.2.1.1 integer read-only
The identifier of the EiconPort assigned by the agent.
                                 lapbBandwidthHigh 1.3.6.1.4.1.434.2.2.4.1.2.1.2 integer read-write
The higher configurable threshold for the lapbTrapBandwidthShortage. If the percentage of bandwidth being used exceeds this amount over a configurable number of seconds (lapbBandwidthSecs) for a configurable number of consecutive periods, (lapbBandwidthNumPeriods), then the trap is sent and the lapbBandwidthTrapsStatus is changed accordingly
                                 lapbBandwidthLow 1.3.6.1.4.1.434.2.2.4.1.2.1.3 integer read-write
The lower configurable threshold for the lapbTrapBandwidthClear. If the percentage of bandwidth being used drops below this amount, subsequent to a lapbTrapBandwidthShortage, then the trap is sent and the lapbBadwidthTrapsStatus is changed accordingly. Note that this value MUST be below that for labpBandwidthHigh
                                 lapbBandwidthSecs 1.3.6.1.4.1.434.2.2.4.1.2.1.4 integer read-write
The number of seconds over which the bandwidth is calculated.
                                 lapbBandwidthNumPeriods 1.3.6.1.4.1.434.2.2.4.1.2.1.5 integer read-write
The number of consecutive periods, each of length lapbBandwidthSecs seconds, that the condition must be present for before the lapbBandwidthShortage trap is sent.
                                 lapbBandwidthTrapState 1.3.6.1.4.1.434.2.2.4.1.2.1.6 integer read-write
This variable indicates whether the agent should generate the lapbTrapBandwidthShortage and lapbTrapBandwidthClear traps if the relevant conditions arise. Set this value to disabled to stop these traps being generated Enumeration: 'disabled': 1, 'enabled': 2.
                                 lapbBandwidthTrapStatus 1.3.6.1.4.1.434.2.2.4.1.2.1.7 bandwidthstatus read-only
The status of the bandwidth traps. This value should be polled to determine whether or not the bandwidth shortage condition is present and a trap has been sent.
                                 lapbBandwidthRxInUse 1.3.6.1.4.1.434.2.2.4.1.2.1.8 integer read-only
The percentage of bandwidth that is currently in use receiving incoming traffic.
                                 lapbBandwidthTxInUse 1.3.6.1.4.1.434.2.2.4.1.2.1.9 integer read-only
The percentage of bandwidth that is currently in use transmitting outgoing traffic.
                         lapbOperTable 1.3.6.1.4.1.434.2.2.4.1.3 no-access
This table contains configuration information about interface parameters currently set in the interface. Many of these objects have corresponding objects in the lapbAdmnTable.
                             lapbOperEntry 1.3.6.1.4.1.434.2.2.4.1.3.1 no-access
Currently set parameter values for a specific LAPB.
                                 lapbOperIndex 1.3.6.1.4.1.434.2.2.4.1.3.1.1 ifindextype read-only
The ifIndex value for the LAPB interface.
                                 lapbOperStationType 1.3.6.1.4.1.434.2.2.4.1.3.1.2 integer read-only
Identifies the current operating station type of this interface. A value of dxe (3) indicates XID negotiation has not yet taken place. Enumeration: 'dxe': 3, 'dce': 2, 'dte': 1.
                                 lapbOperControlField 1.3.6.1.4.1.434.2.2.4.1.3.1.3 integer read-only
The current operating size of the sequence numbers used to number frames. Enumeration: 'modulo8': 1, 'modulo128': 2.
                                 lapbOperTransmitN1FrameSize 1.3.6.1.4.1.434.2.2.4.1.3.1.4 positiveinteger read-only
The current operating N1 frame size used for the maximum number of bits in a frame this DTE can transmit. This excludes flags and 0 bits inserted for transparency.
                                 lapbOperReceiveN1FrameSize 1.3.6.1.4.1.434.2.2.4.1.3.1.5 positiveinteger read-only
The current operating N1 frame size used for the maximum number of bits in a frame the DCE/remote DTE can transmit. This excludes flags and 0 bits inserted for transparency.
                                 lapbOperTransmitKWindowSize 1.3.6.1.4.1.434.2.2.4.1.3.1.6 integer read-only
The current PDU window size this Interface uses to transmit. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE at any one time.
                                 lapbOperReceiveKWindowSize 1.3.6.1.4.1.434.2.2.4.1.3.1.7 integer read-only
The current receive PDU window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote DTE at any one time.
                                 lapbOperN2RxmitCount 1.3.6.1.4.1.434.2.2.4.1.3.1.8 integer read-only
The current N2 retry counter used for this interface. This specifies the number of times a PDU will be resent after the T1 timer expires without an acknowledgement for the PDU.
                                 lapbOperT1AckTimer 1.3.6.1.4.1.434.2.2.4.1.3.1.9 positiveinteger read-only
The current T1 timer for this interface. This specifies the maximum time in Milliseconds to wait for acknowledgment of a PDU.
                                 lapbOperT2AckDelayTimer 1.3.6.1.4.1.434.2.2.4.1.3.1.10 positiveinteger read-only
The current T2 timer for this interface. This specifies the maximum time in Milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value of zero means there will be no delay in acknowledgement generation.
                                 lapbOperT3DisconnectTimer 1.3.6.1.4.1.434.2.2.4.1.3.1.11 positiveinteger read-only
The current T3 timer for this interface. This specifies the time in Milliseconds to wait before considering the link disconnected. A value of zero indicates the link will be considered disconnected upon completion of the frame exchange to disconnect the link.
                                 lapbOperT4IdleTimer 1.3.6.1.4.1.434.2.2.4.1.3.1.12 positiveinteger read-write
The current T4 timer for this interface. This specifies the maximum time in Milliseconds to allow without frames being exchanged on the data link. A value of 2147483647 indicates no idle timer is being kept.
                                 lapbOperPortId 1.3.6.1.4.1.434.2.2.4.1.3.1.13 object identifier read-only
This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical device or interface used to send and receive frames. If an agent does not support any such objects, it should return nullSpec OBJECT IDENTIFIER {0 0}.
                                 lapbOperProtocolVersionId 1.3.6.1.4.1.434.2.2.4.1.3.1.14 object identifier read-only
This object identifies the version of the lapb protocol implemented by this interface.
                         lapbFlowTable 1.3.6.1.4.1.434.2.2.4.1.4 no-access
This table defines the objects recorded by LAPB to provide information about the traffic flow through the interface.
                             lapbFlowEntry 1.3.6.1.4.1.434.2.2.4.1.4.1 no-access
The information regarding the effects of flow controls in LAPB.
                                 lapbFlowIfIndex 1.3.6.1.4.1.434.2.2.4.1.4.1.1 ifindextype read-only
The ifIndex value for the LAPB Interface.
                                 lapbFlowStateChanges 1.3.6.1.4.1.434.2.2.4.1.4.1.2 counter read-only
The number of LAPB State Changes, including resets.
                                 lapbFlowChangeReason 1.3.6.1.4.1.434.2.2.4.1.4.1.3 integer read-only
The reason for the most recent incrementing of lapbFlowStateChanges. A DM or DISC frame generated to initiate link set-up does not alter this object. When the MIB-II object ifOperStatus does not have a value of testing, there exists a correlation between this object and ifOperStatus. IfOperStatus will have a value of up when this object contains: abmEntered, abmeEntered, abmReset, or abmeReset. IfOperStatus will have a value of down when this object has a value of notStarted, or dmReceived through n2Timeout. There is no correlation when this object has the value other. Enumeration: 'n2Timeout': 12, 'abmeReset': 5, 'dmSent': 7, 'discReceived': 8, 'notStarted': 1, 'discSent': 9, 'other': 13, 'abmEntered': 2, 'abmReset': 4, 'frmrSent': 11, 'frmrReceived': 10, 'dmReceived': 6, 'abmeEntered': 3.
                                 lapbFlowCurrentMode 1.3.6.1.4.1.434.2.2.4.1.4.1.4 integer read-only
The current condition of the conversation. Enumeration: 'frameReject': 3, 'rejFrameSent': 6, 'disconnected': 1, 'waitingAckBothBusy': 13, 'stationBusy': 8, 'waitingAckRemoteBusy': 12, 'bothStationsBusy': 10, 'waitingAckStationBusy': 11, 'informationTransfer': 5, 'linkSetup': 2, 'error': 16, 'xidFrameSent': 15, 'remoteStationBusy': 9, 'rejFrameSentRemoteBusy': 14, 'disconnectRequest': 4, 'other': 17, 'waitingAcknowledgement': 7.
                                 lapbFlowBusyDefers 1.3.6.1.4.1.434.2.2.4.1.4.1.5 counter read-only
The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR from the remote device, the lack of valid sequence number space (window saturation), or other conditions.
                                 lapbFlowRejOutPkts 1.3.6.1.4.1.434.2.2.4.1.4.1.6 counter read-only
The number of REJ or SREJ frames sent by this station.
                                 lapbFlowRejInPkts 1.3.6.1.4.1.434.2.2.4.1.4.1.7 counter read-only
The number of REJ or SREJ frames received by this station.
                                 lapbFlowT1Timeouts 1.3.6.1.4.1.434.2.2.4.1.4.1.8 counter read-only
The number of times a re-transmission was effected by the T1 Timer expiring.
                                 lapbFlowFrmrSent 1.3.6.1.4.1.434.2.2.4.1.4.1.9 octet string read-only
The Information Field of the FRMR most recently sent. If no FRMR has been sent (the normal case) or the information isn't available, this will be an OCTET STRING of zero length.
                                 lapbFlowFrmrReceived 1.3.6.1.4.1.434.2.2.4.1.4.1.10 octet string read-only
The Information Field of the FRMR most recently received. If no FRMR has been received (the normal case) or the information isn't available, this will be an OCTET STRING of zero length.
                                 lapbFlowXidReceived 1.3.6.1.4.1.434.2.2.4.1.4.1.11 octet string read-only
The Information Field of the XID frame most recently received. If no XID frame has been received, this will be an OCTET STRING of zero length.
           lapbTrapBandwidthShortage 1.3.6.1.4.1.4340.411
This trap indicates that the amount of bandwidth used on the specified port has risen above lapbBandwidthHigh percent over lapbBandwidthNumPeriods of lapbBandwidthSecs. The next two parameters indicate the percentage of the total bandwidth used in each direction (Transmitting or Receiving) over the last lapbBandwidthSecs number of seconds. The final parameter indicates the direction(s) in which the bandwidth threshold has been exceeded
           lapbTrapBandwidthClear 1.3.6.1.4.1.4340.412
This trap indicates that the condition causing a previous lapbTrapBandwidthShortage no longer applies; in particular that the bandwidth being used on the specified port has dropped to below lapbBandwidthLow percent over the last lapbBandwidthSecs number of seconds The final parameter indicates the direction(s) in which the bandwidth exceeded condition has been cleared