EATON-ATS2-MIB: View SNMP OID List / Download MIB

VENDOR: EATON CORPORATION


 Home MIB: EATON-ATS2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, EATON-OIDS, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ats2 1.3.6.1.4.1.534.10.2
The MIB module for Eaton ATS (Automatic Transfer Switch).
     ats2Ident 1.3.6.1.4.1.534.10.2.1
         ats2IdentManufacturer 1.3.6.1.4.1.534.10.2.1.1 displaystring read-only
The manufacturer name.
         ats2IdentModel 1.3.6.1.4.1.534.10.2.1.2 displaystring read-only
Device model name.
         ats2IdentFWVersion 1.3.6.1.4.1.534.10.2.1.3 displaystring read-only
Device F/W version.
         ats2IdentRelease 1.3.6.1.4.1.534.10.2.1.4 displaystring read-only
The released date.
         ats2IdentSerialNumber 1.3.6.1.4.1.534.10.2.1.5 displaystring read-only
Device serial number
         ats2IdentPartNumber 1.3.6.1.4.1.534.10.2.1.6 displaystring read-only
Device part number
         ats2IdentAgentVersion 1.3.6.1.4.1.534.10.2.1.7 displaystring read-only
Communication Card F/W version
     ats2Measure 1.3.6.1.4.1.534.10.2.2
         ats2Input 1.3.6.1.4.1.534.10.2.2.1
             ats2InputDephasing 1.3.6.1.4.1.534.10.2.2.1.1 integer read-only
The dephasing in between Source 1 and Source 2.
         ats2InputTable 1.3.6.1.4.1.534.10.2.2.2 no-access
The table of input information.
             ats2InputEntry 1.3.6.1.4.1.534.10.2.2.2.1 no-access
The input information of each source input: .1 source1 .2 source2
                 ats2InputIndex 1.3.6.1.4.1.534.10.2.2.2.1.1 integer read-only
Index to input. Enumeration: 'source2': 2, 'source1': 1.
                 ats2InputVoltage 1.3.6.1.4.1.534.10.2.2.2.1.2 integer read-only
The input voltage in front of relay. Units are 0.1 V.
                 ats2InputFrequency 1.3.6.1.4.1.534.10.2.2.2.1.3 integer read-only
The input frequency. Units are 0.1 Hz.
         ats2Output 1.3.6.1.4.1.534.10.2.2.3
             ats2OutputVoltage 1.3.6.1.4.1.534.10.2.2.3.1 integer read-only
The output voltage. Units are 0.1 V.
             ats2OutputCurrent 1.3.6.1.4.1.534.10.2.2.3.2 integer read-only
The output current. Units are 0.1 A.
         ats2OperationMode 1.3.6.1.4.1.534.10.2.2.4 integer read-only
The operation mode. Enumeration: 'off': 3, 'fault': 7, 'initialization': 1, 'safe': 6, 'source2': 5, 'source1': 4, 'diagnosis': 2.
     ats2Status 1.3.6.1.4.1.534.10.2.3
         ats2InputStatus 1.3.6.1.4.1.534.10.2.3.1
             ats2InputStatusDephasing 1.3.6.1.4.1.534.10.2.3.1.1 integer read-only
The dephasing status in between Source 1 and Source 2. Enumeration: 'outOfRange': 2, 'normal': 1.
         ats2InputStatusTable 1.3.6.1.4.1.534.10.2.3.2 no-access
The table of input status.
             ats2InputStatusEntry 1.3.6.1.4.1.534.10.2.3.2.1 no-access
The input flow status: .1 source1 .2 source2
                 ats2InputStatusIndex 1.3.6.1.4.1.534.10.2.3.2.1.1 integer read-only
Index of input entry. Enumeration: 'source2': 2, 'source1': 1.
                 ats2InputStatusFrequency 1.3.6.1.4.1.534.10.2.3.2.1.2 integer read-only
The status of input frequency. Enumeration: 'good': 1, 'outOfRange': 2.
                 ats2InputStatusGood 1.3.6.1.4.1.534.10.2.3.2.1.3 integer read-only
The summarized status of input AC flow. Enumeration: 'voltageAndFreqNormalRange': 2, 'voltageDeratedRangeAndFreqNormalRange': 3, 'voltageOrFreqOutofRange': 1, 'voltageAndFreqNormalRangeWaveformNok': 4.
                 ats2InputStatusInternalFailure 1.3.6.1.4.1.534.10.2.3.2.1.4 integer read-only
The internal fault status of input. Enumeration: 'internalFailure': 2, 'good': 1.
                 ats2InputStatusVoltage 1.3.6.1.4.1.534.10.2.3.2.1.5 integer read-only
The status of input voltage. Enumeration: 'deratedRange': 2, 'normalRange': 1, 'outofRange': 3, 'missing': 4.
                 ats2InputStatusUsed 1.3.6.1.4.1.534.10.2.3.2.1.6 integer read-only
The status of input relay. Enumeration: 'poweringLoad': 2, 'notPoweringLoad': 1.
         ats2OutputStatus 1.3.6.1.4.1.534.10.2.3.3
             ats2StatusInternalFailure 1.3.6.1.4.1.534.10.2.3.3.1 integer read-only
Output fault. Enumeration: 'internalFailure': 2, 'good': 1.
             ats2StatusOutput 1.3.6.1.4.1.534.10.2.3.3.2 integer read-only
Output powered status. Enumeration: 'outputPowered': 2, 'outputNotPowered': 1.
             ats2StatusOverload 1.3.6.1.4.1.534.10.2.3.3.3 integer read-only
The output overload status. Enumeration: 'noOverload': 1, 'warningOverload': 2, 'criticalOverload': 3.
             ats2StatusOverTemperature 1.3.6.1.4.1.534.10.2.3.3.4 integer read-only
The over temperature status. Enumeration: 'noOverTemperature': 1, 'overTemperature': 2.
             ats2StatusShortCircuit 1.3.6.1.4.1.534.10.2.3.3.5 integer read-only
Short circuit status. Enumeration: 'shortCircuit': 2, 'noShortCircuit': 1.
             ats2StatusCommunicationLost 1.3.6.1.4.1.534.10.2.3.3.6 integer read-only
Communication failure status. Enumeration: 'good': 1, 'communicationLost': 2.
             ats2StatusConfigurationFailure 1.3.6.1.4.1.534.10.2.3.3.7 integer read-only
Configuration failure status. Enumeration: 'good': 1, 'configurationFailure': 2.
     ats2Config 1.3.6.1.4.1.534.10.2.4
         ats2ConfigTime 1.3.6.1.4.1.534.10.2.4.1
             ats2ConfigTimeRTC 1.3.6.1.4.1.534.10.2.4.1.1 unixtimestamp read-write
Clock value. This could be from either a real-time clock (in which case it is likely writeable) or from a time server via NTP (probably read-only). (since 1/1/1970 at 1:00:00).
             ats2ConfigTimeTextDate 1.3.6.1.4.1.534.10.2.4.1.2 displaystring read-only
The present date in MM/DD/YYYY text format.
             ats2ConfigTimeTextTime 1.3.6.1.4.1.534.10.2.4.1.3 displaystring read-only
The present time in hh:mm:ss text format.
         ats2ConfigInputVoltageRating 1.3.6.1.4.1.534.10.2.4.2 integer read-only
The input voltage rating. Unit is 1 V.
         ats2ConfigInputFrequencyRating 1.3.6.1.4.1.534.10.2.4.3 integer read-only
The input frequency rating. Unit is 1 Hz.
         ats2ConfigOutputVoltage 1.3.6.1.4.1.534.10.2.4.4 integer read-write
The output voltage config. Unit is 1 V.
         ats2ConfigPreferred 1.3.6.1.4.1.534.10.2.4.5 integer read-write
The preferred source. Enumeration: 'source2': 2, 'source1': 1.
         ats2ConfigSensitivity 1.3.6.1.4.1.534.10.2.4.6 integer read-write
The AC Blackout Sensitivity. Enumeration: 'highSensitivity': 2, 'lowSensitivity': 3, 'normal': 1.
         ats2ConfigTransferMode 1.3.6.1.4.1.534.10.2.4.7 integer read-write
behavior configuration when transfering from one source to other source not synchronized. Enumeration: 'gap': 2, 'standard': 1.
         ats2ConfigTransferTest 1.3.6.1.4.1.534.10.2.4.8 integer read-only
The status of transfer test. Enumeration: 'noTestInitiated': 6, 'doneAndPassed': 1, 'doneAndError': 3, 'aborted': 4, 'doneAndWarning': 2, 'inProgress': 5.
         ats2ConfigBrownoutLow 1.3.6.1.4.1.534.10.2.4.9 integer read-only
Setting of input brownout low voltage. Unit is 1 V.
         ats2ConfigBrownoutLowDerated 1.3.6.1.4.1.534.10.2.4.10 integer read-only
Setting of input brownout low derated voltage. Unit is 1 V.
         ats2ConfigBrownoutHigh 1.3.6.1.4.1.534.10.2.4.11 integer read-only
Setting of input brownout high voltage. Unit is 1 V.
         ats2ConfigHysteresisVoltage 1.3.6.1.4.1.534.10.2.4.12 integer read-only
Hysteresis between loss point and comeback point. Unit is 1 V.
     ats2Environment 1.3.6.1.4.1.534.10.2.5
         ats2EnvRemoteTemp 1.3.6.1.4.1.534.10.2.5.1 integer read-only
The reading of an EMP's temperature sensor.
         ats2EnvRemoteHumidity 1.3.6.1.4.1.534.10.2.5.2 integer read-only
The reading of an EMP's humidity sensor.
         ats2EnvNumContacts 1.3.6.1.4.1.534.10.2.5.3 integer read-only
The number of Contacts in the ats2ContactSenseTable. This object indicates the number of rows in the ats2ContactSenseTable.
         ats2ContactSenseTable 1.3.6.1.4.1.534.10.2.5.4 no-access
A list of Contact Sensing table entries. The number of entries is given by the value of ats2EnvNumContacts.
             ats2ContactsTableEntry 1.3.6.1.4.1.534.10.2.5.4.1 no-access
An entry containing information applicable to a particular Contact input.
                 ats2ContactIndex 1.3.6.1.4.1.534.10.2.5.4.1.1 integer read-only
The Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syntax checkers if it is included in traps.
                 ats2ContactType 1.3.6.1.4.1.534.10.2.5.4.1.2 integer read-write
The normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the ats2tdContactActiveNotice trap. If anyChange(3) is selected, then this trap is sent any time the contact changes to either Open or Closed. No traps are sent if the Contact is set to notUsed(4). In many cases, the configuration for Contacts may be done by other means, so this object may be read-only. Enumeration: 'normallyOpen': 1, 'normallyClosed': 2, 'anyChange': 3, 'notUsed': 4.
                 ats2ContactState 1.3.6.1.4.1.534.10.2.5.4.1.3 integer read-only
The current state of the Contact input; the value is based on the open/closed input state and the setting for ats2ContactType. When entering the openWithNotice(3) and closedWithNotice(4) states, no entries added to the ats2AlarmTable, but the ats2tdContactActiveNotice trap is sent. Enumeration: 'closedWithNotice': 4, 'openWithNotice': 3, 'open': 1, 'closed': 2.
                 ats2ContactDescr 1.3.6.1.4.1.534.10.2.5.4.1.4 displaystring read-write
A label identifying the Contact. This object should be set by the administrator.
         ats2EnvRemoteTempLowerLimit 1.3.6.1.4.1.534.10.2.5.5 integer read-write
The Lower Limit of the EMP temperature; if ats2EnvRemoteTemp falls below this value, the ats2RemoteTempBad alarm will occur.
         ats2EnvRemoteTempUpperLimit 1.3.6.1.4.1.534.10.2.5.6 integer read-write
The Upper Limit of the EMP temperature; if ats2EnvRemoteTemp rises above this value, the ats2RemoteTempBad alarm will occur. This value should be greater than ats2EnvRemoteTempLowerLimit.
         ats2EnvRemoteHumidityLowerLimit 1.3.6.1.4.1.534.10.2.5.7 integer read-write
The Lower Limit of the EMP humidity reading; if ats2EnvRemoteHumidity falls below this value, the ats2RemoteHumidityBad alarm will occur.
         ats2EnvRemoteHumidityUpperLimit 1.3.6.1.4.1.534.10.2.5.8 integer read-write
The Upper Limit of the EMP humidity reading; if ats2EnvRemoteHumidity rises above this value, the ats2RemoteHumidityBad alarm will occur. This value should be greater than ats2EnvRemoteHumidityLowerLimit.
     ats2Traps 1.3.6.1.4.1.534.10.2.10
           ats2TrapCommunicationLost 1.3.6.1.4.1.534.10.2.10.1
Communication with the ATS failed.
           ats2TrapCommunicationRecovered 1.3.6.1.4.1.534.10.2.10.2
Communication with the ATS recovered.
           ats2TrapOutputPowered 1.3.6.1.4.1.534.10.2.10.3
The ATS powers the load.
           ats2TrapOutputNotPowered 1.3.6.1.4.1.534.10.2.10.4
The ATS does not powers the load.
           ats2TrapOverload 1.3.6.1.4.1.534.10.2.10.5
The ATS has sensed a critical overload.
           ats2TrapNoOverLoad 1.3.6.1.4.1.534.10.2.10.6
The critical overload disappeared.
           ats2TrapInternalFailure 1.3.6.1.4.1.534.10.2.10.7
The ATS has an internal failure (sum of all HW internal failure).
           ats2TrapNoInternalFailure 1.3.6.1.4.1.534.10.2.10.8
The ATS internal failure disappeared.
           ats2TrapSource1Normal 1.3.6.1.4.1.534.10.2.10.9
Source 1 returns to normal.
           ats2TrapSource1OutOfRange 1.3.6.1.4.1.534.10.2.10.10
Source 1 out of range.
           ats2TrapSource2Normal 1.3.6.1.4.1.534.10.2.10.11
Source 2 returns to normal.
           ats2TrapSource2OutOfRange 1.3.6.1.4.1.534.10.2.10.12
Source 2 out of range.
           ats2TrapSourceDesynchronized 1.3.6.1.4.1.534.10.2.10.13
Source 1 and Source 2 phase are desynchronized.
           ats2TrapSourceSynchronized 1.3.6.1.4.1.534.10.2.10.14
Source 1 and Source 2 phase are synchronized.
           ats2TrapOutputPoweredBySource1 1.3.6.1.4.1.534.10.2.10.15
Source 1 powers the output.
           ats2TrapOutputPoweredBySource2 1.3.6.1.4.1.534.10.2.10.16
Source 2 powers the output.
           ats2TrapRemoteTempLow 1.3.6.1.4.1.534.10.2.10.20
The remote temperature, ats2EnvRemoteTemp, has fallen below the set lower limit, ats2EnvRemoteTempLowerLimit.
           ats2TrapRemoteTempHigh 1.3.6.1.4.1.534.10.2.10.21
The remote temperature, ats2EnvRemoteTemp, has risen above the set upper limit, xupsEnvRemoteTempUpperLimit.
           ats2TrapRemoteTempNormal 1.3.6.1.4.1.534.10.2.10.22
The remote temperature, ats2EnvRemoteTemp, is inside the interval defined by the lower limit and the upper limit.
           ats2TrapRemoteHumidityLow 1.3.6.1.4.1.534.10.2.10.23
The remote humidity, ats2EnvRemoteHumidity, has fallen below the set lower limit, ats2EnvRemoteHumidityLowerLimit.
           ats2TrapRemoteHumidityHigh 1.3.6.1.4.1.534.10.2.10.24
The remote humidity, ats2EnvRemoteHumidity, has risen above the set upper limit, ats2EnvRemoteHumidityUpperLimit.
           ats2TrapRemoteHumidityNormal 1.3.6.1.4.1.534.10.2.10.25
The remote humidity, ats2EnvRemoteHumidity, is inside the interval defined by the lower limit and the upper limit.
           ats2Contact1ActiveNotice 1.3.6.1.4.1.534.10.2.10.26
The Contact 1 is in its Active state. The following are the situations that generate this trap: For ats2ContactType: and ats2ContactState: normallyOpen(1) and closedWithNotice(4) normallyClosed(2) and openWithNotice(3) anyChange(3) and openWithNotice(3) or closedWithNotice(4)
           ats2Contact1InactiveNotice 1.3.6.1.4.1.534.10.2.10.27
The Contact 1 has changed to its Inactive state.
           ats2Contact2ActiveNotice 1.3.6.1.4.1.534.10.2.10.28
The Contact 2 is in its Active state. The following are the situations that generate this trap: For ats2ContactType: and ats2ContactState: normallyOpen(1) and closedWithNotice(4) normallyClosed(2) and openWithNotice(3) anyChange(3) and openWithNotice(3) or closedWithNotice(4)
           ats2Contact2InactiveNotice 1.3.6.1.4.1.534.10.2.10.29
The Contact 2 has changed to its Inactive state.
           ats2TestTrap 1.3.6.1.4.1.534.10.2.10.40
Sent whenever the trap test feature is used by the communication card.