E5-121-IESCOMMON-MIB: View SNMP OID List / Download MIB

VENDOR: CALIX NETWORKS


 Home MIB: E5-121-IESCOMMON-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, E5-121-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 reboot 1.3.6.1.4.1.6321.1.2.3.4.0.1
Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
 systemShutdown 1.3.6.1.4.1.6321.1.2.3.4.0.2
Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
 overheat 1.3.6.1.4.1.6321.1.2.3.4.0.3
Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system.
 overheatOver 1.3.6.1.4.1.6321.1.2.3.4.0.4
Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system.
 errLog 1.3.6.1.4.1.6321.1.2.3.4.0.5
Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log.
 fanRpmLow 1.3.6.1.4.1.6321.1.2.3.4.0.6
Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan.
 fanRpmNormal 1.3.6.1.4.1.6321.1.2.3.4.0.7
Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan.
 voltageOutOfRange 1.3.6.1.4.1.6321.1.2.3.4.0.8
Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system.
 voltageNormal 1.3.6.1.4.1.6321.1.2.3.4.0.9
Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system.
 systemMaintenanceFailure 1.3.6.1.4.1.6321.1.2.3.4.0.10
Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem.
 configChange 1.3.6.1.4.1.6321.1.2.3.4.0.11
This notification indicates that the configuration data of one module is changed.
 moduleUp 1.3.6.1.4.1.6321.1.2.3.4.0.12
A moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up.
 moduleDown 1.3.6.1.4.1.6321.1.2.3.4.0.13
A moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration.
 modulePlugIn 1.3.6.1.4.1.6321.1.2.3.4.0.14
A modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device.
 modulePullOut 1.3.6.1.4.1.6321.1.2.3.4.0.15
A modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device.
 powerDC48VAFailure 1.3.6.1.4.1.6321.1.2.3.4.0.16
The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed.
 powerDC48VANormal 1.3.6.1.4.1.6321.1.2.3.4.0.17
The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state.
 powerDC48VBFailure 1.3.6.1.4.1.6321.1.2.3.4.0.18
The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed.
 powerDC48VBNormal 1.3.6.1.4.1.6321.1.2.3.4.0.19
The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state.
 extAlarmInputTrigger 1.3.6.1.4.1.6321.1.2.3.4.0.20
The trap signifies that the external alarm input of MSC card is triggered.
 extAlarmInputRelease 1.3.6.1.4.1.6321.1.2.3.4.0.21
The trap signifies that the external alarm input of MSC card is released.
 thermalSensorFailure 1.3.6.1.4.1.6321.1.2.3.4.0.22
The trap signifies that the thermal sensor failed.
 mscSwitchOverOK 1.3.6.1.4.1.6321.1.2.3.4.0.23
The trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC.
 networkTopologyChange 1.3.6.1.4.1.6321.1.2.3.4.0.24
The trap signifies the network topology is changed.
 adslAtucLof 1.3.6.1.4.1.6321.1.2.3.4.0.25
The trap signifies ATU-C Loss of Framing.
 adslAturLof 1.3.6.1.4.1.6321.1.2.3.4.0.26
The trap signifies ATU-R Loss of Framing.
 adslAtucLos 1.3.6.1.4.1.6321.1.2.3.4.0.27
The trap signifies ATU-C Loss of Signal.
 adslAturLos 1.3.6.1.4.1.6321.1.2.3.4.0.28
The trap signifies ATU-R Loss of Signal.
 adslAturLpr 1.3.6.1.4.1.6321.1.2.3.4.0.29
The trap signifies ATU-R Loss of Power.
 adslAtucLofClear 1.3.6.1.4.1.6321.1.2.3.4.0.30
The trap signifies ATU-C Loss of Framing is cleared.
 adslAturLofClear 1.3.6.1.4.1.6321.1.2.3.4.0.31
The trap signifies ATU-R Loss of Framing is cleared.
 adslAtucLosClear 1.3.6.1.4.1.6321.1.2.3.4.0.32
The trap signifies ATU-C Loss of Signal is cleared.
 adslAturLosClear 1.3.6.1.4.1.6321.1.2.3.4.0.33
The trap signifies ATU-R Loss of Signal is cleared.
 adslAturLprClear 1.3.6.1.4.1.6321.1.2.3.4.0.34
The trap signifies ATU-R Loss of Power is cleared.
   iesChassis 1.3.6.1.4.1.6321.1.2.3.4.98.1
       iesNumOfChassis 1.3.6.1.4.1.6321.1.2.3.4.98.1.1 integer read-only
The number of chassis in the IES-2000/3000 system
       iesChassisTable 1.3.6.1.4.1.6321.1.2.3.4.98.1.2 no-access
The table which contains the chassis information in IES-2000/3000 system
           iesChassisEntry 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1 no-access
               iesChassisId 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.1 integer read-only
The Chassis ID
               iesChassisFrameNumber 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.2 integer read-write
The Frame ID
               iesChassisSerialNumber 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.3 displaystring read-only
The Chassis Serial Number
               iesChassisNumber 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.4 integer read-write
The Chassis Number which is defined by the system administrator for management purpose
               iesChassisStatus 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.5 integer read-only
The current status of the chassis. Enumeration: 'down': 3, 'testing': 4, 'up': 2, 'empty': 1.
               iesChassisProductPartNumber 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.6 displaystring read-only
Product part number
               iesChassisHwRevisionNumber 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.7 displaystring read-only
HW revision Number
               iesChassisCleiCode 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.8 displaystring read-only
CLEI code
               iesChassisHwVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.9 displaystring read-only
Hardware version
               iesChassisMacAddress 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.10 displaystring read-only
MAC address
               iesChassisVoipDspVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.11 displaystring read-only
Voip dsp version
               iesChassisCodecVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.2.1.12 displaystring read-only
Codec F/W version
       iesSlotTable 1.3.6.1.4.1.6321.1.2.3.4.98.1.3 no-access
The table which contains the slot information in a chassis of IES-2000/3000 system
           iesSlotEntry 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1 no-access
               iesSlotId 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.1 integer read-only
Identity of the slot
               iesSlotModuleType 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.2 integer read-only
Card type of the plug-in card in IES-2000/3000. Enumeration: 'alc1224-53': 14, 'alc1024-61': 4, 'alc1224-51': 13, 'alc1024-63': 7, 'vlc1012': 5, 'msc1000-L2': 2, 'alc1224-71': 10, 'unknown': 1, 'alc1224-73': 11, 'vlc1124': 9, 'msc1000A': 8, 'msc1000-ML': 3, 'slc1224-22': 12, 'slc1024': 6.
               iesSlotModuleDescr 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.3 displaystring read-only
The descriptions of the plug-in card in IES-2000/3000.
               iesSlotModuleFWVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.4 displaystring read-only
The firmware version of the plug-in card in IES-2000/3000.
               iesSlotModuleDriverVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.5 displaystring read-only
The DSL driver of the plug-in card in IES-2000/3000.
               iesSlotModuleModemCodeVersion 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.6 displaystring read-only
The DSL modem code version of the plug-in card in IES-2000/3000
               iesSlotModuleStatus 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.7 integer read-only
The module state of the plug-in card in IES-2000/3000 Enumeration: 'down': 3, 'standby': 5, 'testing': 4, 'up': 2, 'empty': 1.
               iesSlotModuleAlarmStatus 1.3.6.1.4.1.6321.1.2.3.4.98.1.3.1.8 integer read-only
This variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 moduleNoDefect 2 moduleOverHeat 3 moduleFanRpmLow 4 moduleVoltageLow 5 moduleThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange
       iesMscPortConfTable 1.3.6.1.4.1.6321.1.2.3.4.98.1.4 no-access
The table contains port configuration information in MSC1000.
           iesMscPortConfEntry 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1 no-access
               iesMscPortId 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.1 integer read-only
Identity of the extension slot in MSC1000.
               iesMscPortType 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.2 integer read-only
Port type of the extension slot in MSC1000. Enumeration: 'unknown': 1, 'e100BaseTX': 6, 'e1000BaseT': 2, 'e1000BaseLX': 3, 'e100BaseFX': 5, 'e1000BaseSX': 4, 'e1000BaseGBIC': 7.
               iesMscPortIfIndex 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.3 integer read-only
               iesMscPortSpeed 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.4 integer read-write
Enumeration: 'auto': 1, 'e100M': 3, 'e1000M': 2, 'e10M': 4.
               iesMscPortDuplex 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.5 integer read-write
Enumeration: 'full': 1, 'half': 2.
               iesMscPortFlowControl 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.6 integer read-write
Enumeration: 'false': 2, 'true': 1.
               iesMscPortDefaultVLANTagging 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.7 integer read-write
Enumeration: 'false': 2, 'true': 1.
               iesMscPortTrunkGroupId 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.8 integer read-only
               iesMscPortMode 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.9 integer read-write
The operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified. Enumeration: 'subtending': 2, 'uplink': 1.
               iesMscPortVLANTrunking 1.3.6.1.4.1.6321.1.2.3.4.98.1.4.1.10 integer read-write
The VLAN trunking setting for uplink and subtending ports in MSC. Enumeration: 'enable': 1, 'disable': 2.
   iesHWMonitor 1.3.6.1.4.1.6321.1.2.3.4.98.2
       iesFanRpmTable 1.3.6.1.4.1.6321.1.2.3.4.98.2.1 no-access
A table that contains rpm information about the fans.
           iesFanRpmEntry 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1 no-access
A list of rpm information for each fan.
               iesFanRpmIndex 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.1 integer read-only
The identity of the fan.
               iesFanRpmCurValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.2 integer read-only
The current rpm of the fan.
               iesFanRpmMaxValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.3 integer read-only
The maximum rpm ever performed by the fan.
               iesFanRpmMinValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.4 integer read-only
The minimum rpm ever performed by the fan.
               iesFanRpmLowThresh 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.5 integer read-only
The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.
               iesFanRpmDescr 1.3.6.1.4.1.6321.1.2.3.4.98.2.1.1.6 displaystring read-only
The description of the fan (e.g. location, function, etc.).
       iesVoltageTable 1.3.6.1.4.1.6321.1.2.3.4.98.2.2 no-access
A table that contains voltage information about the system.
           iesVoltageEntry 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1 no-access
A list of voltage information for each sensor.
               iesVoltageIndex 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.1 integer read-only
The identity of the sensor.
               iesVoltageCurValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.2 integer read-only
The current voltage detected by the sensor (in milli-voltage).
               iesVoltageMaxValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.3 integer read-only
The maximum voltage ever detected by the sensor (in milli-voltage).
               iesVoltageMinValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.4 integer read-only
The minimum voltage ever detected by the sensor (in milli-voltage).
               iesVoltageNominalValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.5 integer read-only
The nominal voltage which the power should supply (in milli-voltage).
               iesVoltageLowThresh 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.6 integer read-only
The low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
               iesVoltageDescr 1.3.6.1.4.1.6321.1.2.3.4.98.2.2.1.7 displaystring read-only
The description of the voltage (e.g. location, nominal value, etc.).
       iesSysTempTable 1.3.6.1.4.1.6321.1.2.3.4.98.2.3 no-access
A table that contains temperature information about system.
           iesSysTempEntry 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1 no-access
A list of temperature information for each sensor.
               iesSysTempIndex 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.1 integer read-only
The identity of the sensor.
               iesSysTempCurValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.2 integer read-only
The current temperature detected in Celsius by the sensor.
               iesSysTempMaxValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.3 integer read-only
The maximum temperature ever detected in Celsius by the sensor.
               iesSysTempMinValue 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.4 integer read-only
The minimum temperature ever detected in Celsius by the sensor.
               iesSysTempHighThresh 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.5 integer read-only
The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
               iesSysTempDescr 1.3.6.1.4.1.6321.1.2.3.4.98.2.3.1.6 displaystring read-only
The description of the temperature sensor (e.g. location, function, etc.).
   iesSysMgnt 1.3.6.1.4.1.6321.1.2.3.4.98.3
       iesSysState 1.3.6.1.4.1.6321.1.2.3.4.98.3.1
           iesSystemCurrentStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.1.1 integer read-only
This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sysNoDefect 2 sysOverHeat 3 sysFanRpmLow 4 sysVoltageLow 5 sysThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange
           iesProblemCause 1.3.6.1.4.1.6321.1.2.3.4.98.3.1.2 displaystring read-only
It describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc.
       iesSysMaintenance 1.3.6.1.4.1.6321.1.2.3.4.98.3.2
           iesMaintenanceOps 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.1 integer read-write
The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT 3: local loopback test BIT 4: remote loopback test BIT 5: clear system alarms BIT 6: F4 loopback test BIT 7: F5 loopback test BIT 8: DSL Line Diagnostic
           iesMaintenanceTarget 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.2 integer read-write
The managed object is used for identify the target on which the maintenance operation should be performed.
           iesMaintenanceDSLConfOps 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.3 integer read-write
The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile BIT 5: enable mac filter BIT 6: disable mac filter BIT 7: set packet filter BIT 8: enable dot1x BIT 9: disable dot1x BIT 10: set dot1x control BIT 11: enable dot1x re-authentication BIT 12: disable dot1x re-authentication BIT 13: set dot1x re-authentication period BIT 14: enable mac count filter BIT 15: disable mac count filter BIT 16: set mac count filter BIT 17: set alarm profile BIT 18: set Annex L (Only in AnnexA) BIT 19: set power management BIT 20: set rate adaptation mode BIT 21: set IGMP filter (Not support after E5-121 v3.1) BIT 22: enable Annex M BIT 23: disable Annex M
           iesMaintenanceDSLConfTarget 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.4 octet string read-write
The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
           iesMaintenanceDSLConfProfileName 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.5 displaystring read-write
The DSL profile name
           iesMaintenanceDSLConfMode 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.6 integer read-write
The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+
           iesMaintenanceDSLConfPktFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.7 integer read-write
The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: reject IP
           iesMaintenanceDSLConfDot1xControl 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.8 integer read-write
The configuration defines the 802.1x control type. Enumeration: 'auto': 1, 'forceUnAuth': 3, 'forceAuth': 2.
           iesMaintenanceDSLConfDot1xReauthPeriod 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.9 integer read-write
The configuration defines the 802.1x re-authentication period (seconds).
           iesMaintenanceDSLConfMacCount 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.10 integer read-write
The configuration defines the number of mac addresses which can pass through the port.
           iesMaintenanceVpi 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.11 integer read-write
VPI of the channel
           iesMaintenanceVci 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.12 integer read-write
VCI of the channel
           iesMaintenanceDSLConfAlarmProfileName 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.13 octet string read-write
The DSL alarm profile name
           iesMaintenanceDSLConfAnnexL 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.14 integer read-write
The annex L setting of the ADSL line (Only in AnnexA). Enumeration: 'enableNarrowMode': 1, 'disable': 3, 'enableWideMode': 2.
           iesMaintenanceDSLConfPmMode 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.15 integer read-write
The power management mode of the ADSL line. Enumeration: 'enableL3Mode': 2, 'disable': 3, 'enableL2Mode': 1.
           iesMaintenanceDSLConfRateMode 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.16 integer read-write
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. Enumeration: 'adaptAtStartup': 2, 'fixed': 1, 'adaptAtRuntime': 3.
           iesMaintenanceDSLConfIgmpFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.2.17 octet string read-write
The IGMP filter name.
       iesSysTimeSetup 1.3.6.1.4.1.6321.1.2.3.4.98.3.3
           iesTimeServerMode 1.3.6.1.4.1.6321.1.2.3.4.98.3.3.1 integer read-write
The mechanism of Time Server when the system boots up. Enumeration: 'ntp': 4, 'none': 1, 'daytime': 2, 'time': 3.
           iesTimeServerIP 1.3.6.1.4.1.6321.1.2.3.4.98.3.3.2 ipaddress read-write
The IP Address of Time Server
           iesSystemTime 1.3.6.1.4.1.6321.1.2.3.4.98.3.3.3 displaystring read-write
The system time
           iesSystemDate 1.3.6.1.4.1.6321.1.2.3.4.98.3.3.4 displaystring read-write
The system date
           iesSystemTimeZone 1.3.6.1.4.1.6321.1.2.3.4.98.3.3.5 integer read-write
The system time zone Enumeration: 'utc-0600': 7, 'utc1200': 25, 'utc-0800': 5, 'utc0100': 14, 'utc0200': 15, 'utc-0100': 12, 'utc0300': 16, 'utc-0200': 11, 'utc-0300': 10, 'utc0800': 21, 'utc-0900': 4, 'utc1100': 24, 'utc1000': 23, 'utc0400': 17, 'utc': 13, 'utc0500': 18, 'utc-0700': 6, 'utc-0400': 9, 'utc-1200': 1, 'utc-0500': 8, 'utc-1100': 2, 'none': 0, 'utc-1000': 3, 'utc0600': 19, 'utc0900': 22, 'utc0700': 20.
       iesSysAccessControl 1.3.6.1.4.1.6321.1.2.3.4.98.3.4
           iesAccessCtrlTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.1 no-access
A table that contains information about service access control.
               iesAccessCtrlEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.1.1 no-access
A list of access control entry.
                   iesAccessCtrlService 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.1.1.1 integer read-only
The service type of the access control entry. Enumeration: 'ftp': 2, 'icmp': 4, 'telnet': 1, 'web': 3.
                   iesAccessCtrlEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.1.1.2 integer read-write
Enable or disable the service. Enumeration: 'enable': 1, 'disable': 2.
                   iesAccessCtrlPort 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.1.1.3 integer read-write
The port number which the service uses.
           iesMaxNumOfSecuredClients 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.2 integer read-only
The maximum number of sets of secured clients.
           iesSecuredClientTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3 no-access
A table that contains information about secured clients.
               iesSecuredClientEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3.1 no-access
A list of secured client entry.
                   iesSecuredClientStartIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3.1.1 ipaddress read-only
The starting IP address of a set of secured clients.
                   iesSecuredClientEndIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3.1.2 ipaddress read-only
The ending IP address of a set of secured clients.
                   iesSecuredClientService 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3.1.3 integer read-only
Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: FTP BIT 3: web BIT 4: ICMP
                   iesSecuredClientRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.4.3.1.4 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.
       iesSysStaticRoute 1.3.6.1.4.1.6321.1.2.3.4.98.3.5
           iesMaxNumOfStaticRoutes 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.1 integer read-only
The maximum number of static routes.
           iesStaticRouteTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2 no-access
A table that contains information about static routes.
               iesStaticRouteEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1 no-access
A list of static route entry.
                   iesStaticRouteName 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.1 displaystring read-only
The name of the static route.
                   iesStaticRouteDest 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.2 ipaddress read-only
The destination IP address of the static route.
                   iesStaticRouteMask 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.3 ipaddress read-only
The subnet mask of the static route.
                   iesStaticRouteGateway 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.4 ipaddress read-only
The gateway IP address of the static route.
                   iesStaticRouteMetric 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.5 integer read-only
The routing metric of the static route.
                   iesStaticRouteRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.5.2.1.6 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'.
       iesSyslogSetup 1.3.6.1.4.1.6321.1.2.3.4.98.3.6
           iesSysLogEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.6.1 integer read-write
Enable/disable syslog function.
           iesSysLogServer 1.3.6.1.4.1.6321.1.2.3.4.98.3.6.2 ipaddress read-write
IP address of the syslog server.
           iesSysLogFacility 1.3.6.1.4.1.6321.1.2.3.4.98.3.6.3 integer read-write
Log facility used by the syslog function. Enumeration: 'local5': 5, 'local4': 4, 'local7': 7, 'local6': 6, 'local1': 1, 'local3': 3, 'local2': 2.
       iesSysDhcpSetup 1.3.6.1.4.1.6321.1.2.3.4.98.3.7
           iesDhcpRelayEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.1 integer read-write
Enable/disable DHCP relay function. Enumeration: 'enable': 1, 'disable': 2.
           iesDhcpRelayOption82Enable 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.2 integer read-write
Enable/disable DHCP relay Option82 function. Enumeration: 'enable': 1, 'disable': 2.
           iesDhcpRelayOption82Info 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.3 displaystring read-write
User specific Option82 information.
           iesMaxNumOfDhcpServers 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.4 integer read-only
The maximum number of DHCP servers.
           iesDhcpServerTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.5 no-access
A table that contains DHCP server information.
               iesDhcpServerEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.5.1 no-access
The entry of DHCP server table.
                   iesDhcpServerIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.5.1.1 ipaddress read-only
The IP address of the DHCP server.
                   iesDhcpServerRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.7.5.1.2 rowstatus read-only
The row status of the DHCP server entry.
       iesSysSNMPSetup 1.3.6.1.4.1.6321.1.2.3.4.98.3.8
           iesMaxNumberOfTrapDestinations 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.1 integer read-only
The max number of the trap destinations.
           iesSNMPTrapDestTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.2 no-access
A table that contains SNMP trap destination information.
               iesSNMPTrapDestEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.2.1 no-access
The entry of SNMP trap destination table.
                   iesTrapDestIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.2.1.1 ipaddress read-only
The IP address of the trap destination.
                   iesTrapDestPort 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.2.1.2 integer read-only
The UDP port of the trap destination.
                   iesTrapDestRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.2.1.3 rowstatus read-only
The row status of the trap destination entry.
           iesSnmpGetCommunity 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.3 displaystring read-write
The SNMP get community.
           iesSnmpSetCommunity 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.4 displaystring read-write
The SNMP set community.
           iesSnmpTrapCommunity 1.3.6.1.4.1.6321.1.2.3.4.98.3.8.5 displaystring read-write
The SNMP trap community.
       iesSysDot1xSetup 1.3.6.1.4.1.6321.1.2.3.4.98.3.9
           iesMaxNumberOfRadiusServers 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.1 integer read-only
The max number of the RADIUS Servers.
           iesRadiusServerTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2 no-access
A table that contains Radius Server information.
               iesRadiusServerEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1 no-access
The entry of Radius Server table.
                   iesRadiusServerIndex 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1.1 integer read-only
The identity of the RADIUS server.
                   iesRadiusServerIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1.2 ipaddress read-only
The IP address of the Radius Server.
                   iesRadiusServerPort 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1.3 integer read-only
The UDP port of the Radius Server.
                   iesRadiusSharedSecret 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1.4 displaystring read-only
The shared secret of the Radius Server.
                   iesRadiusServerRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.2.1.5 rowstatus read-only
The row status of the Radius Server entry.
           iesDot1xEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.3 integer read-write
Enable/disable the 802.1x function. Enumeration: 'enable': 1, 'disable': 2.
           iesDot1xPortTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4 no-access
This table includes the configuration of 802.1x.
               iesDot1xPortEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4.1 no-access
An entry in iesDot1xPortTable.
                   iesDot1xPortEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4.1.1 integer read-write
The option defines if the port enables 802.1x settings. Enumeration: 'enable': 1, 'disable': 2.
                   iesDot1xPortControl 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4.1.2 integer read-write
The configuration defines the 802.1x port control type. Enumeration: 'auto': 1, 'forceUnAuth': 3, 'forceAuth': 2.
                   iesDot1xPortReAuthEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4.1.3 integer read-write
The option defines if the port enables 802.1x re-authentication. Enumeration: 'on': 1, 'off': 2.
                   iesDot1xPortReAuthPeriod 1.3.6.1.4.1.6321.1.2.3.4.98.3.9.4.1.4 integer read-write
The configuration defines the 802.1x re-authentication period (seconds) for each port.
       iesSysMacFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.10
             iesMacFilterStatusTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.1 no-access
This table includes the status of mac filtering for each port.
                 iesMacFilterStatusEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.1.1 no-access
An entry in iesMacFilterStatusTable.
                     iesMacFilterStatusEnable 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.1.1.1 integer read-write
The option defines if the port enables mac filtering. Enumeration: 'disable': 2, 'enableAccept': 1, 'enableDeny': 3.
             iesMaxNumberOfMacFilters 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.2 integer read-only
The max number of the mac filters in the system.
             iesMaxNumberOfMacFiltersPerPort 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.3 integer read-only
The max number of the mac filters for each port.
             iesCurrNumberOfMacFilters 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.4 integer read-only
The current number of the mac filters in the system.
             iesMacFilterTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.5 no-access
A table that contains the mac filtering information.
                 iesMacFilterEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.5.1 no-access
The entry of iesMacFilterTable.
                     iesMacFilterMacAddr 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.5.1.1 physaddress read-only
The mac address which can pass through the port.
                     iesMacFilterRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.10.5.1.2 rowstatus read-only
The row status of the entry.
       iesSysPacketFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.11
             iesPacketFilterTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.11.1 no-access
This table includes packet filtering for each port.
                 iesPacketFilterEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.11.1.1 no-access
An entry in iesPacketFilterTable.
                     iesPacketFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.11.1.1.1 integer read-write
The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: reject IP
       iesSysMacCountFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.12
             iesMacCountFilterTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.12.1 no-access
This table includes mac count filtering for each port.
                 iesMacCountFilterEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.12.1.1 no-access
An entry in iesMacCountFilterTable.
                     iesMacCountFilterStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.12.1.1.1 integer read-write
The option defines if the port enables mac count filtering. Enumeration: 'enable': 1, 'disable': 2.
                     iesMacCountFilterCount 1.3.6.1.4.1.6321.1.2.3.4.98.3.12.1.1.2 integer read-write
The number of mac addresses which can pass through the port.
       iesSysMulticastGroup 1.3.6.1.4.1.6321.1.2.3.4.98.3.13
             iesMaxNumberOfMulticastGroups 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.1 integer read-only
The max number of static multicast groups in the system.
             iesMulticastGroupTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2 no-access
A table that contains static multicast group information.
                 iesMulticastGroupEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2.1 no-access
The entry of multicast group table.
                     iesMulticastGroupVid 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2.1.1 integer read-only
The multicast VLAN of the group.
                     iesMulticastGroupMacAddr 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2.1.2 physaddress read-only
The multicast MAC address of the group.
                     iesMulticastGroupPorts 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2.1.3 portlist read-only
The port list which specifies the ports joining the multicast group.
                     iesMulticastGroupRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.13.2.1.4 rowstatus read-only
The row status of the multicast group entry.
       iesSysIgmpFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.14
             iesMaxNumberOfIgmpFilters 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.1 integer read-only
The max number of IGMP filters in the system.
             iesIgmpFilterTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2 no-access
A table that contains IGMP filters.
                 iesIgmpFilterEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1 no-access
The entry of IGMP filter table.
                     iesIgmpFilterName 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1.1 octet string read-only
The IGMP filter name.
                     iesIgmpFilterIndex 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1.2 integer read-only
The index which specifies the filter rule.
                     iesIgmpFilterStartIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1.3 ipaddress read-only
The start IP of the filter rule.
                     iesIgmpFilterEndIp 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1.4 ipaddress read-only
The end IP of the filter rule.
                     iesIgmpFilterRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.2.1.5 rowstatus read-only
The row status of the IGMP filter entry.
             iesIgmpFilterPortTable 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.3 no-access
This table specifies the IGMP filter of the port.
                 iesIgmpFilterPortEntry 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.3.1 no-access
An entry in iesIgmpFilterPortTable.
                     iesIgmpFilterPortFilter 1.3.6.1.4.1.6321.1.2.3.4.98.3.14.3.1.1 octet string read-write
The IGMP filter of the port.
   iesL2SW 1.3.6.1.4.1.6321.1.2.3.4.98.4
       iesIGMPSnoopingEnabled 1.3.6.1.4.1.6321.1.2.3.4.98.4.1 integer read-write
A flag indicating whether IGMP snooping function is enabled or not. Enumeration: 'false': 2, 'true': 1.
       iesManagementVLANId 1.3.6.1.4.1.6321.1.2.3.4.98.4.2 integer read-write
The VLAN ID for management.
       iesMaxNumOfStaticVlans 1.3.6.1.4.1.6321.1.2.3.4.98.4.3 integer read-only
The maximum number of static VLANs supported by the system.
       iesMaxNumOfTrunkGroups 1.3.6.1.4.1.6321.1.2.3.4.98.4.4 integer read-only
The maximum number of trunk groups.
       iesTrunkGroupTable 1.3.6.1.4.1.6321.1.2.3.4.98.4.5 no-access
A table that contains trunk group configuration.
           iesTrunkGroupEntry 1.3.6.1.4.1.6321.1.2.3.4.98.4.5.1 no-access
The entry of trunk group table
               iesTrunkGroupId 1.3.6.1.4.1.6321.1.2.3.4.98.4.5.1.1 integer read-only
The ID of the trunk group
               iesTrunkGroupName 1.3.6.1.4.1.6321.1.2.3.4.98.4.5.1.2 displaystring read-only
The name of the trunk group
               iesTrunkGroupPorts 1.3.6.1.4.1.6321.1.2.3.4.98.4.5.1.3 portlist read-only
The port list of the trunk group
               iesTrunkGroupRowStatus 1.3.6.1.4.1.6321.1.2.3.4.98.4.5.1.4 rowstatus read-only
The row status of the trunk group entry
       iesPortIsolationEnable 1.3.6.1.4.1.6321.1.2.3.4.98.4.6 integer read-write
A flag indicating whether VLAN port isolation function is enabled or not. Enumeration: 'enable': 1, 'disable': 2.
       iesRSTPEnable 1.3.6.1.4.1.6321.1.2.3.4.98.4.7 integer read-write
Enable/Disable RSTP. Enumeration: 'enable': 1, 'disable': 2.
       iesSwitchMode 1.3.6.1.4.1.6321.1.2.3.4.98.4.8 integer read-write
Switch DSLAM's operatrion Mode. Enumeration: 'daisyChain': 1, 'standalone': 2.