E5-120-MIB: View SNMP OID List / Download MIB

VENDOR: CALIX NETWORKS

Home	MIB: E5-120-MIB
Download as:		SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, Q-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC, IEEE8021-CFM-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
calixNetworks	1.3.6.1.4.1.6321
calixRegistrations	1.3.6.1.4.1.6321.1
calixProducts	1.3.6.1.4.1.6321.1.2
e5x100	1.3.6.1.4.1.6321.1.2.3
e5x120	1.3.6.1.4.1.6321.1.2.3.3
alarmconf	1.3.6.1.4.1.6321.1.2.3.3.2
alarmOps	1.3.6.1.4.1.6321.1.2.3.3.2.1	integer	read-write	The manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. The various bit positions are: BIT 1: clear BIT 2: cutoff
alarmConfTable	1.3.6.1.4.1.6321.1.2.3.3.2.2		no-access	This table includes alarm configuration.
alarmConfEntry	1.3.6.1.4.1.6321.1.2.3.3.2.2.1		no-access	An entry in alarmConfTable.
alarmConfId	1.3.6.1.4.1.6321.1.2.3.3.2.2.1.1	integer	read-only	5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_uas 5009:xd_xtuc_loftrap 5010:xd_xtuc_lostrap 5011:xd_xtur_loftrap 5012:xd_xtur_lostrap 5013:xd_xtur_lprtrap 5014:ad_dhcp_rt_full 5015:ad_dhcp_dm_conflict 5016:ad_dhcp_entry_full 5017:ad_dhcp_ip_dup 5018:ad_dhcp_mac_dup 10000:eqptVol_err 10001:eqptEqpttemp_err 10002:eqptFan_err 10003:eqptHw_rtc_fail 10004:eqptHw_mon_fail 10005:eqptCold_start 10006:eqptWarm_start 10007:eqptAlm_input 10008:eqptAlm_input2 10009:eqptAlm_input3 15000:sysReboot 15001:sysAco 15002:sysAlm_clear 15003:sysLogin_fail 15004:sysAnti_spoofing 15005:sysAlm_svrty_change 15006:sysHost_terminate 20000:enetUp 20001:enetDown 30000:cfmError
alarmConfFacility	1.3.6.1.4.1.6321.1.2.3.3.2.2.1.2	integer	read-write	Alarm facility. Enumeration: 'local5': 5, 'local4': 4, 'local7': 7, 'local6': 6, 'local1': 1, 'local3': 3, 'local2': 2.
alarmConfTarget	1.3.6.1.4.1.6321.1.2.3.3.2.2.1.3	integer	read-write	The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
alarmConfSeverity	1.3.6.1.4.1.6321.1.2.3.3.2.2.1.4	integer	read-write	Alarm severity Enumeration: 'info': 4, 'major': 2, 'critical': 1, 'minor': 3.
alarmConfClearable	1.3.6.1.4.1.6321.1.2.3.3.2.2.1.5	integer	read-write	Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear. Enumeration: 'clearable': 1, 'unclearable': 2.
alarmCurrTable	1.3.6.1.4.1.6321.1.2.3.3.2.3		no-access	This table includes current alarm information.
alarmCurrEntry	1.3.6.1.4.1.6321.1.2.3.3.2.3.1		no-access	An entry in alarmCurrTable.
alarmCurrIndex	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.1	integer	read-only	Index of the alarm.
alarmCurrOccurTime	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.2	timeticks	read-only	Alarm occurence time (in hundredths of a second) since the system was last re-initialized.
alarmCurrTrapOid	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.3	object identifier	read-only	Trap OID of the alarm.
alarmCurrParam1	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.4	integer	read-only	The 1st parameter of the alarm.
alarmCurrParam2	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.5	integer	read-only	The 2nd parameter of the alarm.
alarmCurrParam3	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.6	integer	read-only	The 3rd parameter of the alarm.
alarmCurrParam4	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.7	integer	read-only	The 4th parameter of the alarm.
alarmCurrParam5	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.8	integer	read-only	The 5th parameter of the alarm.
alarmCurrParam6	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.9	integer	read-only	The 6th parameter of the alarm.
alarmCurrParam7	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.10	integer	read-only	The 7th parameter of the alarm.
alarmCurrParam8	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.11	integer	read-only	The 8th parameter of the alarm.
alarmCurrTimeDescr	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.12	displaystring	read-only	The string representation of occurence time (YYYY/MM/DD HH:MM:SS).
alarmCurrSeverity	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.13	integer	read-only	The severity of the alarm. Enumeration: 'info': 4, 'major': 2, 'critical': 1, 'minor': 3.
alarmCurrDescr	1.3.6.1.4.1.6321.1.2.3.3.2.3.1.14	displaystring	read-only	The description of the alarm.
alarmSeverityPortTable	1.3.6.1.4.1.6321.1.2.3.3.2.4		no-access	This table includes the configuration of alarm reporting severity threshold for each port.
alarmSeverityPortEntry	1.3.6.1.4.1.6321.1.2.3.3.2.4.1		no-access	An entry in alarmSeverityPortTable.
severityThresh	1.3.6.1.4.1.6321.1.2.3.3.2.4.1.1	integer	read-write	The minimum alarm severity that is reported. Enumeration: 'info': 4, 'major': 2, 'critical': 1, 'minor': 3.
diagnostic	1.3.6.1.4.1.6321.1.2.3.3.4
selt	1.3.6.1.4.1.6321.1.2.3.3.4.3
seltTarget	1.3.6.1.4.1.6321.1.2.3.3.4.3.1	integer	read-write	IfIndex of the port which would be performed single end loopback test.
seltOps	1.3.6.1.4.1.6321.1.2.3.3.4.3.2	integer	read-write	The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
seltStatus	1.3.6.1.4.1.6321.1.2.3.3.4.3.3	displaystring	read-only	Status description of the selt result.
seltCableType	1.3.6.1.4.1.6321.1.2.3.3.4.3.4	integer	read-only	The cable type that selt result indicates. Enumeration: 'awg24': 1, 'awg26': 2.
seltLoopEstimateLengthFt	1.3.6.1.4.1.6321.1.2.3.3.4.3.5	integer	read-only	The estimated loop length that selt result indicates.
seltLoopEstimateLengthMeter	1.3.6.1.4.1.6321.1.2.3.3.4.3.6	integer	read-only	The estimated loop length that selt result indicates.
ldm	1.3.6.1.4.1.6321.1.2.3.3.4.4
ldmTarget	1.3.6.1.4.1.6321.1.2.3.3.4.4.1	integer	read-write	IfIndex of the port which would be performed ldm test.
ldmOps	1.3.6.1.4.1.6321.1.2.3.3.4.4.2	integer	read-write	The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed.
ldmStatus	1.3.6.1.4.1.6321.1.2.3.3.4.4.3	displaystring	read-only	Status description of ldm test result.
ldmXtucLoopAttenuation	1.3.6.1.4.1.6321.1.2.3.3.4.4.4	integer	read-only	Loop Attenuation.
ldmXtucSignalAttenuation	1.3.6.1.4.1.6321.1.2.3.3.4.4.5	integer	read-only	Signal Attenuation.
ldmXtucSignalMargin	1.3.6.1.4.1.6321.1.2.3.3.4.4.6	integer	read-only	Signal Margin.
ldmXtucAggregateTxPower	1.3.6.1.4.1.6321.1.2.3.3.4.4.7	integer	read-only	Actual Aggregate Transmit Power.
ldmXtucAttainableBitRate	1.3.6.1.4.1.6321.1.2.3.3.4.4.8	unsigned32	read-only	Attainable Bit Rate.
ldmXturLoopAttenuation	1.3.6.1.4.1.6321.1.2.3.3.4.4.9	integer	read-only	Loop Attenuation.
ldmXturSignalAttenuation	1.3.6.1.4.1.6321.1.2.3.3.4.4.10	integer	read-only	Signal Attenuation.
ldmXturSignalMargin	1.3.6.1.4.1.6321.1.2.3.3.4.4.11	integer	read-only	Signal Margin.
ldmXturAggregateTxPower	1.3.6.1.4.1.6321.1.2.3.3.4.4.12	integer	read-only	Actual Aggregate Transmit Power.
ldmXturAttainableBitRate	1.3.6.1.4.1.6321.1.2.3.3.4.4.13	unsigned32	read-only	Attainable Bit Rate.
ldmXtucNumOfSubcarriersPerPort	1.3.6.1.4.1.6321.1.2.3.3.4.4.14	integer	read-only	The number of subcarriers per port for ATU-C.
ldmXturNumOfSubcarriersPerPort	1.3.6.1.4.1.6321.1.2.3.3.4.4.15	integer	read-only	The number of subcarriers per port for ATU-R.
ldmXtucHlinScale	1.3.6.1.4.1.6321.1.2.3.3.4.4.16	integer	read-only	Scale of Hlin.
ldmXtucHlinReal1	1.3.6.1.4.1.6321.1.2.3.3.4.4.17	octet string	read-only	The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucHlinReal2	1.3.6.1.4.1.6321.1.2.3.3.4.4.18	octet string	read-only	The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucHlinImage1	1.3.6.1.4.1.6321.1.2.3.3.4.4.19	octet string	read-only	The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucHlinImage2	1.3.6.1.4.1.6321.1.2.3.3.4.4.20	octet string	read-only	The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucHlog1	1.3.6.1.4.1.6321.1.2.3.3.4.4.21	octet string	read-only	The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucHlog2	1.3.6.1.4.1.6321.1.2.3.3.4.4.22	octet string	read-only	The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucQln1	1.3.6.1.4.1.6321.1.2.3.3.4.4.23	octet string	read-only	The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucQln2	1.3.6.1.4.1.6321.1.2.3.3.4.4.24	octet string	read-only	The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucSnr1	1.3.6.1.4.1.6321.1.2.3.3.4.4.25	octet string	read-only	The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXtucSnr2	1.3.6.1.4.1.6321.1.2.3.3.4.4.26	octet string	read-only	The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
ldmXturHlinScale	1.3.6.1.4.1.6321.1.2.3.3.4.4.27	integer	read-only	Scale of Hlin.
ldmXturHlinReal	1.3.6.1.4.1.6321.1.2.3.3.4.4.28	octet string	read-only	Real part of Hlin. Each subcarrier takes two octets to store the value.
ldmXturHlinImage	1.3.6.1.4.1.6321.1.2.3.3.4.4.29	octet string	read-only	Image part of Hlin. Each subcarrier takes two octets to store the value.
ldmXturHlog	1.3.6.1.4.1.6321.1.2.3.3.4.4.30	octet string	read-only	Hlog of subcarrier. Each subcarrier takes two octets to store the value.
ldmXturQln	1.3.6.1.4.1.6321.1.2.3.3.4.4.31	octet string	read-only	QLN of subcarrier. Each subcarrier takes two octets to store the value.
ldmXturSnr	1.3.6.1.4.1.6321.1.2.3.3.4.4.32	octet string	read-only	SNR of subcarrier. Each subcarrier takes two octets to store the value.
ldmXtucHlogGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.33	octet string	read-only	The Hlog group factor of ATU-C.
ldmXtucQlnGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.34	octet string	read-only	The Qln group factor of ATU-C.
ldmXtucSnrGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.35	octet string	read-only	The Snr group factor of ATU-C.
ldmXturHlogGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.36	octet string	read-only	The Hlog group factor of ATU-R.
ldmXturQlnGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.37	octet string	read-only	The Qln group factor of ATU-R.
ldmXturSnrGroupFactor	1.3.6.1.4.1.6321.1.2.3.3.4.4.38	octet string	read-only	The Snr group factor of ATU-R.
multicast	1.3.6.1.4.1.6321.1.2.3.3.7
igmpEnable	1.3.6.1.4.1.6321.1.2.3.3.7.1	integer	read-write	Enable/disable IGMP protocol. Enumeration: 'enableProxy': 1, 'enableSnooping': 2, 'disable': 3.
mcastBandwidth	1.3.6.1.4.1.6321.1.2.3.3.7.4
mcastDefaultBandwidth	1.3.6.1.4.1.6321.1.2.3.3.7.4.1	integer	read-write	Default bandwidth requirement for a multicast channel.
maxNumOfMcastBw	1.3.6.1.4.1.6321.1.2.3.3.7.4.2	integer	read-only	The maximum number of row entries that user can create in mcastBwTable.
mcastBwTable	1.3.6.1.4.1.6321.1.2.3.3.7.4.3		no-access	This table defines bandwidth budget for a range of multicast IP channels.
mcastBwEntry	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1		no-access	An entry of mcastBwTable.
mcastBwIndex	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.1	integer	read-only	The index which specify the entry.
mcastBwStartIp	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.2	ipaddress	read-only	The start multicast IP of the bandwidth control range.
mcastBwEndIp	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.3	ipaddress	read-only	The end multicast IP of the bandwidth control range.
mcastBwBandwidth	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.4	integer	read-only	The bandwidth budget for the multicast IP channels.
mcastBwRowStatus	1.3.6.1.4.1.6321.1.2.3.3.7.4.3.1.5	rowstatus	read-only	The row status of the entry.
mcastBwPortTable	1.3.6.1.4.1.6321.1.2.3.3.7.4.4		no-access	This table specify the multicast bandwidth control of the port.
mcastBwPortEntry	1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1		no-access	An entry of mcastBwPortTable.
mcastBwPortEnable	1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.1	integer	read-write	Enable/disable multicast bandwidth control for a port. Enumeration: 'enable': 1, 'disable': 2.
mcastBwPortBandwidth	1.3.6.1.4.1.6321.1.2.3.3.7.4.4.1.2	integer	read-write	Set bandwidth threshold for a port.
igmpCount	1.3.6.1.4.1.6321.1.2.3.3.7.5
igmpCountPortTable	1.3.6.1.4.1.6321.1.2.3.3.7.5.1		no-access	This table specify the IGMP count limiting of the port.
igmpCountPortEntry	1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1		no-access	An entry of igmpCountPortTable.
igmpCountPortEnable	1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.1	integer	read-write	Enable/disable IGMP count limiting for a port. Enumeration: 'enable': 1, 'disable': 2.
igmpCountPortLimit	1.3.6.1.4.1.6321.1.2.3.3.7.5.1.1.2	integer	read-write	The maximum allowed IGMP report count for a port.
mvlan	1.3.6.1.4.1.6321.1.2.3.3.7.6
maxNumOfMvlan	1.3.6.1.4.1.6321.1.2.3.3.7.6.1	integer	read-only	The maximum number of row entries that user can create in mvlanTable.
mvlanTable	1.3.6.1.4.1.6321.1.2.3.3.7.6.2		no-access	A table containing static configuration information for each multicast VLAN configured into the device.
mvlanEntry	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1		no-access	An entry of mvlanTable.
mvlanIndex	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.1	vlanindex	read-only	The VLAN-ID refering to this VLAN.
mvlanName	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.2	displaystring	read-only	An administratively assigned string, which may be used to identify the VLAN.
mvlanEgressPorts	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.3	portlist	read-only	The set of ports which are permanently assigned to the egress list for this multicast VLAN.
mvlanUntaggedPorts	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.4	portlist	read-only	The set of ports which should transmit egress packets for this multicast VLAN as untagged.
mvlanRowStatus	1.3.6.1.4.1.6321.1.2.3.3.7.6.2.1.5	rowstatus	read-only	This object indicates the status of this entry.
mvlanTranslateTable	1.3.6.1.4.1.6321.1.2.3.3.7.6.3		no-access	A table that contains multicast to VLAN translation.
mvlanTranslateEntry	1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1		no-access	An entry of mvlanTranslateTable.
mvlanTranslateIndex	1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.1	integer	read-only	The index which specif the entry.
mvlanTranslateStartIp	1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.2	ipaddress	read-write	The start IP of the multicast VLAN translation.
mvlanTranslateEndIp	1.3.6.1.4.1.6321.1.2.3.3.7.6.3.1.3	ipaddress	read-write	The end IP of the multicast VLAN translation.
queryVid	1.3.6.1.4.1.6321.1.2.3.3.7.7
maxNumOfQryVid	1.3.6.1.4.1.6321.1.2.3.3.7.7.1	integer	read-only	The maximum number of row entries that user can create in qryVidConfTable.
qryVidConfTable	1.3.6.1.4.1.6321.1.2.3.3.7.7.2		no-access	This table defines statically set VLANs used for response IGMP report.
qryVidConfEntry	1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1		no-access	An entry in qryVidConfTable.
qryVid	1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.1	integer	read-only	VLAN ID.
qryVidRowStatus	1.3.6.1.4.1.6321.1.2.3.3.7.7.2.1.2	rowstatus	read-only	This object indicates the status of this entry.
qryVidStatusTable	1.3.6.1.4.1.6321.1.2.3.3.7.7.3		no-access	This table shows statically set or dynamically learned VLANs used for response IGMP report.
qryVidStatusEntry	1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1		no-access	An entry in qryVidStatusTable.
qryVidType	1.3.6.1.4.1.6321.1.2.3.3.7.7.3.1.1	integer	read-only	VLAN type. Enumeration: 'dynamic': 2, 'static': 1.
igmpVersion	1.3.6.1.4.1.6321.1.2.3.3.7.9	integer	read-write	Setting IGMP version. Enumeration: 'v2': 1, 'v3': 2.
igmpLeaveMode	1.3.6.1.4.1.6321.1.2.3.3.7.10	integer	read-write	Configure IGMP leave message handling mode. Enumeration: 'lastMemberQuery': 2, 'immediateLeave': 1.
igmpTimer	1.3.6.1.4.1.6321.1.2.3.3.7.11
igmpQryInterval	1.3.6.1.4.1.6321.1.2.3.3.7.11.1	integer	read-write	Set IGMP query interval, 10~1000 in seconds.
igmpRobust	1.3.6.1.4.1.6321.1.2.3.3.7.11.2	integer	read-write	Set IGMP query Robustness, 1~5.
igmpQryRespInterval	1.3.6.1.4.1.6321.1.2.3.3.7.11.3	integer	read-write	Set IGMP query response interval, 1~100 in 100 milliseconds.
igmpLastMemQryInterval	1.3.6.1.4.1.6321.1.2.3.3.7.11.4	integer	read-write	Set IGMP Last Member Query interval, 1~5 in 100 milliseconds.
igmpLastMemQryRobust	1.3.6.1.4.1.6321.1.2.3.3.7.11.5	integer	read-write	Set Last Member Query Robustness, 1~5.
auditQuery	1.3.6.1.4.1.6321.1.2.3.3.7.12
auditQryEnable	1.3.6.1.4.1.6321.1.2.3.3.7.12.1	integer	read-write	Enable/disable IGMP audit query. Enumeration: 'enable': 1, 'disable': 2.
auditQryInterval	1.3.6.1.4.1.6321.1.2.3.3.7.12.2	integer	read-write	Set IGMP Audit Query Interval, 1~4 in 100 milliseconds.
auditQryRobust	1.3.6.1.4.1.6321.1.2.3.3.7.12.3	integer	read-write	Set IGMP Audit Query Robustness, 1~5.
igmpProfile	1.3.6.1.4.1.6321.1.2.3.3.7.13
maxNumberOfIgmpProfiles	1.3.6.1.4.1.6321.1.2.3.3.7.13.1	integer	read-only	The max number of IGMP profiles in the system.
igmpProfileTable	1.3.6.1.4.1.6321.1.2.3.3.7.13.2		no-access	A table that contains IGMP Profiles.
igmpProfileEntry	1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1		no-access	The entry of IGMP Profile table.
igmpProfileName	1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.1	displaystring	read-only	The IGMP Profile name.
igmpProfileEnable	1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.2	integer	read-write	Enable/disable IGMP Profile. Enumeration: 'enable': 1, 'disable': 2.
igmpProfileMaxGroup	1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.3	integer	read-write	Set maximum allowed multicast group, 1~64.
igmpProfileRowStatus	1.3.6.1.4.1.6321.1.2.3.3.7.13.2.1.4	rowstatus	read-only	The row status of the IGMP Profile entry.
igmpFilterTable	1.3.6.1.4.1.6321.1.2.3.3.7.13.3		no-access	A table that contains IGMP Filters.
igmpFilterEntry	1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1		no-access	The entry of IGMP Filter table.
igmpFilterIndex	1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.1	integer	read-only	The index which specifies the filter rule.
igmpFilterStartIp	1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.2	ipaddress	read-only	The start IP of the filter rule.
igmpFilterEndIp	1.3.6.1.4.1.6321.1.2.3.3.7.13.3.1.3	ipaddress	read-only	The end IP of the filter rule.
igmpProfilePortTable	1.3.6.1.4.1.6321.1.2.3.3.7.13.4		no-access	This table specifies the IGMP Profile of the port.
igmpProfilePortEntry	1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1		no-access	An entry in igmpProfilePortTable.
igmpProfilePortProfile	1.3.6.1.4.1.6321.1.2.3.3.7.13.4.1.1	octet string	read-write	The IGMP Profile of the port.
port	1.3.6.1.4.1.6321.1.2.3.3.8
subrPortTable	1.3.6.1.4.1.6321.1.2.3.3.8.1		no-access	This table includes subscriber attributes for the port.
subrPortEntry	1.3.6.1.4.1.6321.1.2.3.3.8.1.1		no-access	An entry in subrPortTable.
subrPortName	1.3.6.1.4.1.6321.1.2.3.3.8.1.1.1	displaystring	read-write	Name of the subscriber.
subrPortTel	1.3.6.1.4.1.6321.1.2.3.3.8.1.1.2	displaystring	read-write	Telephone number of the subscriber.
vdslPort	1.3.6.1.4.1.6321.1.2.3.3.8.3
vdslLineConfTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.1		no-access	This table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions.
vdslLineConfEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1		no-access	An entry in vdslLineConfTable.
vdslLineConfUpbo	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.1	integer	read-write	Enable/disable upstream power backoff control. Enumeration: 'enable': 1, 'disable': 2.
vdslLineConfVdslProfile	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.2	integer	read-write	Set VDSL profile. Enumeration: 'adsl2plus': 9, 'vdsl2gdmt': 16, 'auto': 8, 'gdmt': 11, 'vdsl2adsl2': 15, 'adsl2': 13, 't1413': 14, 'vdsl17a': 7, 'vdsl2t1413': 18, 'vdsl2': 10, 'vdsl12a': 5, 'glite': 12, 'vdsl12b': 6, 'vdsl8a': 1, 'vdsl2glite': 17, 'vdsl8c': 3, 'vdsl8b': 2, 'vdsl8d': 4.
vdslLineConfRfiBand	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.4	integer	read-write	Set VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user needs to define customized RFI notch band through vdslRfiCustomTable Enumeration: 'ansi': 2, 'etsi': 3, 'disable': 1, 'custom': 4.
vdslLineConfIpqosProfile	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.5	displaystring	read-write
vdslLineConfVturInp	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.6	integer	read-write	VTUR minimum INP value
vdslLineConfVtucInp	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.7	integer	read-write	VTUC mimimum INT value
vdslLineConfOptionMask	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.8	integer	read-write	Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstream bitswaps Bit4: disable downstream bitwaps Bit5: disable upstream 1-bit constellation support Bit6: disable the transmit windowing in ADSL2+ mode Bit7: disable S=0.5 support in G.dmt Bit8: reserved Bit9: enable nitro Bit10: enable ADSL2 Annex L Bit11: enable ADSL2+ Annex M Bit12: enable US PTM optimization Bit13: enable DS PTM optimization Bit14: enable US PHYR Bit15: enable DS PHYR
vdslLineConfUpboForceLength	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.9	integer	read-write	-1 means max(kl0_CO,kl0_CPE). -2 means min(kl0_CO,kl0_CPE). -3 means kl0_CO. -4 means kl0_CPE. -5 means kl0_CPE + delta as calculated from.
vdslLineConfPsdShape	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.10	integer	read-write	PSD mask type Enumeration: 'vdsl2b8x16': 36, 'vdsl2aEu128': 11, 'vdsl2b8x15': 35, 'vdsl2b8x12': 32, 'vdsl2b8x13': 33, 'vdsl2b8x10': 30, 'vdsl2b8x11': 31, 'vdsl2b7x10': 46, 'vdsl2c138b': 48, 'vdsl2b8x14': 34, 'vdsl2c276co': 51, 'vdsl2b8x8': 28, 'vdsl2b8x9': 29, 'vdsl2c276b': 49, 'vdsl2b8x4': 24, 'vdsl2b8x5': 25, 'vdsl2b8x6': 26, 'vdsl2b8x7': 27, 'vdsl2aNus0': 1, 'vdsl2b8x1': 21, 'vdsl2b8x2': 22, 'vdsl2b8x3': 23, 'vdsl2aEu48': 6, 'vdsl2aEu40': 4, 'vdsl2aEu44': 5, 'vdsl1fttexAnsiM2': 13, 'vdsl2aEu64': 10, 'vdsl1fttexAnsiM2E': 17, 'vdsl1fttexAnsiM1': 12, 'vdsl2aEu60': 9, 'vdsl2c138co': 50, 'vdslFttcabAnsiM1E': 18, 'vdsl2b7x9': 45, 'vdsl2b7x8': 44, 'vdsl2btAnfp': 47, 'vdsl2b7x3': 39, 'vdsl2b7x2': 38, 'vdsl2b7x1': 37, 'vdsl2b7x7': 43, 'vdsl2b7x6': 42, 'vdsl2b7x5': 41, 'vdsl2b7x4': 40, 'vdsl2aCt': 20, 'vdsl1fttcabAnsiM2': 15, 'vdsl1fttcabAnsiM1': 14, 'vdsl2aEu56': 8, 'vdsl2aEu52': 7, 'vdsl1QAMCompatible': 53, 'vdsl2cTcmisdn': 52, 'vdslFttcabAnsiM2E': 19, 'vdsl2aEu32': 2, 'vdsl1fttexAnsiM1E': 16, 'vdsl2aEu36': 3.
vdslLineConfDpbo	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.11	integer	read-write	Enable/Disable DPBO Enumeration: 'enable': 1, 'disable': 2.
vdslLineConfDpboParamEsel	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.12	integer	read-write	DPBO ESEL parameter
vdslLineConfDpboParamEscma	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.13	integer	read-write	DPBO ESCMA parameter -1~1.5 in step of 1/256.
vdslLineConfDpboParamEscmb	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.14	integer	read-write	DPBO ESCMB parameter -1~1.5 in step of 1/256.
vdslLineConfDpboParamEscmc	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.15	integer	read-write	DPBO ESCMC parameter -1~1.5 in step of 1/256.
vdslLineConfDpboParamMus	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.16	integer	read-write	DPBO MUS parameter.
vdslLineConfDpboParamFmin	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.17	integer	read-write	DPBO FMIN parameter
vdslLineConfDpboParamFmax	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.18	integer	read-write	DPBO FMAX parameter
vdslLineConfDpboParamPsdId	1.3.6.1.4.1.6321.1.2.3.3.8.3.1.1.19	integer	read-write	Valid range for setting is 1~6. Enumeration: 'psdCabEtsi': 4, 'psdCo': 1, 'unknown': 0, 'psdExchEtsi': 5, 'psdExchAnsi': 6, 'psdFlat': 2, 'psdCabAnsi': 3.
vdslVlan	1.3.6.1.4.1.6321.1.2.3.3.8.3.2
vdslPortConfTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1		no-access	This table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
vdslPortConfEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1		no-access	An entry in vdslPortConfTable.
vdslPortConfTlsEnable	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.4	integer	read-write	Enable/disable the transparent LAN service. Enumeration: 'enable': 1, 'disable': 2.
vdslPortConfTlsVid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.5	vlanindex	read-write	The transparent LAN service s-tag VID.
vdslPortConfTlsPriority	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.6	integer	read-write	The transparent LAN service s-tag priority.
vdslPortConfDtEnable	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.7	integer	read-write	Enable/disable the Double Tagging service. Enumeration: 'enable': 1, 'disable': 2.
vdslPortConfDtSVid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.8	vlanindex	read-write	The Double Tagging service s-tag VID.
vdslPortConfDtSPriority	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.9	integer	read-write	The Double Tagging service s-tag priority.
vdslPortConfDtCVid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.10	vlanindex	read-write	The Double Tagging service c-tag VID.
vdslPortConfDtCPriority	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.1.1.11	integer	read-write	The Double Tagging service c-tag priority.
vdslPortVlanTranslateTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2		no-access	A table that contains VLAN translation.
vdslPortVlanTranslateEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1		no-access	An entry in vdslPortVlanTranslateTable.
vdslPortVlanTranslateVpi	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.1	integer	read-only	VPI of the vtt.
vdslPortVlanTranslateVci	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.2	integer	read-only	VCI of the vtt.
vdslPortVlanTranslateCxvid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.3	vlanindex	read-only	CXVID of the vtt.
vdslPortVlanTranslateCvid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.4	vlanindex	read-only	CVID of the vtt.
vdslPortVlanTranslateSvid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.5	vlanindex	read-only	SVID of the vtt.
vdslPortVlanTranslateDsonly	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.6	integer	read-only	Donwstream direction only of the vtt.
vdslPortVlanTranslateRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.2.1.7	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
vdslPortPvlanTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4		no-access	Protocol VLAN configuration table.
vdslPortPvlanEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1		no-access	An entry in vdslPortPvlanTable.
vdslPortPvlanEtype	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.1	unsigned32	read-only	0~0xffff.
vdslPortPvlanVid	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.2	vlanindex	read-only
vdslPortPvlanPriority	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.3	integer	read-only
vdslPortPvlanRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.3.2.4.1.4	rowstatus	read-only
vdslRfiCustomTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.3		no-access	This table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions.
vdslRfiCustomEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1		no-access	An entry in vdslRfiCustomTable.
vdslRfiCustomIndex	1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.1	integer	read-only	Index of the table.
vdslRfiCustomStartFreq	1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.2	integer	read-write	The start value of the customized frequency range.
vdslRfiCustomEndFreq	1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.3	integer	read-write	The end value of the customized frequency range.
vdslRfiCustomEnable	1.3.6.1.4.1.6321.1.2.3.3.8.3.3.1.4	integer	read-write	Enable or disable the customized frequency range setting. Enumeration: 'enable': 1, 'disable': 2.
vdslLineConfUpboParamTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.4		no-access	This table includes VDSL UPBO configuration.
vdslLineConfUpboParamEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1		no-access	An entry in vdslLineConfUpboParamTable.
vdslLineConfUpboParamBand	1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.1	integer	read-only	Index of the table.
vdslLineConfUpboParamA	1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.2	integer	read-write
vdslLineConfUpboParamB	1.3.6.1.4.1.6321.1.2.3.3.8.3.4.1.3	integer	read-write
vdslLineConfDpboTable	1.3.6.1.4.1.6321.1.2.3.3.8.3.5		no-access	This table includes VDSL DPBO configuration.
vdslLineConfDpboEntry	1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1		no-access	An entry in vdslLineConfDpboTable.
vdslLineConfDpboIndex	1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.1	integer	read-only	Index of the table.
vdslLineConfDpboTone	1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.2	integer	read-write
vdslLineConfDpboPsd	1.3.6.1.4.1.6321.1.2.3.3.8.3.5.1.3	integer	read-write
pvc	1.3.6.1.4.1.6321.1.2.3.3.8.4
maxNumOfPvcs	1.3.6.1.4.1.6321.1.2.3.3.8.4.1	integer	read-only	The maximum number of PVCs which could be created on a port.
pvcTable	1.3.6.1.4.1.6321.1.2.3.3.8.4.2		no-access	This table includes PVC configuration.
pvcEntry	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1		no-access	An entry in pvcTable.
pvcVpi	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.1	integer	read-only	VPI of the pvc.
pvcVci	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.2	integer	read-only	VCI of the pvc.
pvcPvid	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.3	vlanindex	read-only	Default VID of the pvc.
pvcPriority	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.5	integer	read-only	802.1p default priority of the pvc.
pvcProfile	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.6	displaystring	read-only	The value of this object identifies the row in the ipqosProfileTable.
pvcEncap	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.7	integer	read-only	Encapsulation of the pvc. Enumeration: 'llc': 1, 'vc': 2.
pvcRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.8	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
pvcAcName	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.11	displaystring	read-only	Access concentrator name for paepvc.
pvcServiceName	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.12	displaystring	read-only	Service name for paepvc.
pvcHelloTime	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.13	integer	read-only	The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
pvcAuto	1.3.6.1.4.1.6321.1.2.3.3.8.4.2.1.14	integer	read-only	Enable/disable auto detection for PPPoE/PPPoA encapsulation. Enumeration: 'enable': 1, 'disable': 2.
pvcStateTable	1.3.6.1.4.1.6321.1.2.3.3.8.4.3		no-access	This table show current PVC status.
pvcStateEntry	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1		no-access	An entry in pvcStateTable.
pvcStateVpi	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.1	integer	read-only	VPI of the pvc.
pvcStateVci	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.2	integer	read-only	VCI of the pvc.
pvcStatePvid	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.3	vlanindex	read-only	Default VID of the pvc.
pvcStatePriority	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.4	integer	read-only	802.1p default priority of the pvc.
pvcStateChannelType	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.8	displaystring	read-only	The value of this object identifies the channel type at runtime.
pvcStateEncap	1.3.6.1.4.1.6321.1.2.3.3.8.4.3.1.9	displaystring	read-only	The value of this object identifies the channel encapsulation at runtime.
rpvc	1.3.6.1.4.1.6321.1.2.3.3.8.8
rpvcGatewayTable	1.3.6.1.4.1.6321.1.2.3.3.8.8.1		no-access	This table includes Routed Gateway configuration.
rpvcGatewayEntry	1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1		no-access	An entry in Routed Gateway table.
rpvcGatewayIp	1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.1	ipaddress	read-only	IP of RPVC gateway.
rpvcGatewayVlanId	1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.2	vlanindex	read-write	Vlan id send to this RPVC gateway.
rpvcGatewayRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.3	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
rpvcGatewayPriority	1.3.6.1.4.1.6321.1.2.3.3.8.8.1.1.4	integer	read-write	802.1p p bit send to this RPVC gateway.
rpvcTable	1.3.6.1.4.1.6321.1.2.3.3.8.8.2		no-access	This table includes RPVC configuration.
rpvcEntry	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1		no-access	An entry in rpvcTable.
rpvcVpi	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.1	integer	read-only	VPI of the rpvc.
rpvcVci	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.2	integer	read-only	VCI of the rpvc.
rpvcEncap	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.3	integer	read-only	Encapsulation of the rpvc. Enumeration: 'llc': 1, 'vc': 2.
rpvcProfile	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.4	displaystring	read-only	The ipqos profile of the rpvc.
rpvcIp	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.5	ipaddress	read-only	The IP of the rpvc.
rpvcNetmask	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.6	ipaddress	read-only	The IP mask of the rpvc IP.
rpvcGatewayIpAddress	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.7	ipaddress	read-only	The gateway IP of rpvc.
rpvcRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.8.2.1.8	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
rpvcRouteDomainTable	1.3.6.1.4.1.6321.1.2.3.3.8.8.3		no-access	This table includes RPVC route domain configuration.
rpvcRouteDomainEntry	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1		no-access	An entry in rpvcRouteDomainTable.
rpvcRouteDomainVpi	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.1	integer	read-only	VPI of the rpvc.
rpvcRouteDomainVci	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.2	integer	read-only	VCI of the rpvc.
rpvcRouteDomainIp	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.3	ipaddress	read-only	The route domain IP.
rpvcRouteDomainNetmask	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.4	ipaddress	read-only	The IP mask of the route domain IP.
rpvcRouteDomainRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.8.3.1.5	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
rpvcArpAgingTime	1.3.6.1.4.1.6321.1.2.3.3.8.8.4	integer	read-write	Set RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
rpvcArpFlush	1.3.6.1.4.1.6321.1.2.3.3.8.8.5	integer	read-write	Flush the RPVC ARP proxy table. Enumeration: 'enable': 1.
dsBcastDisableTable	1.3.6.1.4.1.6321.1.2.3.3.8.9		no-access	This table includes Down Stream Bcast configuration.
dsBcastDisableEntry	1.3.6.1.4.1.6321.1.2.3.3.8.9.1		no-access	An entry in Down Stream Bcast table.
dsBcastDisableVlanId	1.3.6.1.4.1.6321.1.2.3.3.8.9.1.1	integer	read-only	downstream broadcast disabled vid.
dsBcastDisableRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.9.1.2	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
paepvc	1.3.6.1.4.1.6321.1.2.3.3.8.10
paepvcTable	1.3.6.1.4.1.6321.1.2.3.3.8.10.1		no-access	This table includes PPPoAoE PVC configuration.
paepvcEntry	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1		no-access	An entry of paepvcTable.
paepvcVpi	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.1	integer	read-only	VPI of the pvc.
paepvcVci	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.2	integer	read-only	VCI of the pvc.
paepvcPvid	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.3	vlanindex	read-only	Default VID of the pvc.
paepvcEncap	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.4	integer	read-only	Encapsulation of the paepvc. Enumeration: 'llc': 1, 'vc': 2.
paepvcPriority	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.5	integer	read-only	802.1p default priority of the pvc.
paepvcProfile	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.6	displaystring	read-only	The value of this object identifies the row in the ipqosProfileTable.
paepvcAcName	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.7	displaystring	read-only	Access concentrator name.
paepvcServiceName	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.8	displaystring	read-only	Service name.
paepvcHelloTime	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.9	integer	read-only	The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
paepvcRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.10	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
paepvcCvid	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.12	vlanindex	read-only	Default C-VID of the pvc.
paepvcCPriority	1.3.6.1.4.1.6321.1.2.3.3.8.10.1.1.13	integer	read-only	802.1p default C-priority of the pvc.
tlspvc	1.3.6.1.4.1.6321.1.2.3.3.8.11
tlspvcTable	1.3.6.1.4.1.6321.1.2.3.3.8.11.1		no-access	This table includes Transparent LAN Service (TLS) PVC configuration.
tlspvcEntry	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1		no-access	An entry of tlspvcTable.
tlspvcVpi	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.1	integer	read-only	VPI of the pvc.
tlspvcVci	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.2	integer	read-only	VCI of the pvc.
tlspvcSvid	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.3	vlanindex	read-only	s-tag VLAN ID of the pvc.
tlspvcEncap	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.4	integer	read-only	Encapsulation of the tlspvc. Enumeration: 'llc': 1, 'vc': 2.
tlspvcSpriority	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.5	integer	read-only	s-tag priority of the pvc.
tlspvcProfile	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.6	displaystring	read-only	The value of this object identifies the row in the ipqosProfileTable.
tlspvcRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.11.1.1.7	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
dtpvc	1.3.6.1.4.1.6321.1.2.3.3.8.13
dtpvcTable	1.3.6.1.4.1.6321.1.2.3.3.8.13.1		no-access	This table includes Double Tagging (DT) PVC configuration.
dtpvcEntry	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1		no-access	An entry of dtpvcTable.
dtpvcVpi	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.1	integer	read-only	VPI of the pvc.
dtpvcVci	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.2	integer	read-only	VCI of the pvc.
dtpvcSvid	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.3	vlanindex	read-only	s-tag VLAN ID of the pvc.
dtpvcSpriority	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.4	integer	read-only	s-tag priority of the pvc.
dtpvcCvid	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.5	vlanindex	read-only	c-tag VLAN ID of the pvc.
dtpvcCpriority	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.6	integer	read-only	c-tag priority of the pvc.
dtpvcEncap	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.7	integer	read-only	Encapsulation of the dtpvc. Enumeration: 'llc': 1, 'vc': 2.
dtpvcProfile	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.8	displaystring	read-only	The value of this object identifies the row in the ipqosProfileTable.
dtpvcRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.9	rowstatus	read-only	This object is used to create a new row or delete an existing row in this table.
dtpvcSuperChannel	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.10	integer	read-only	Specified the configured DTPVC is a super channel. Enumeration: 'enable': 1, 'disable': 2.
dtpvcAcName	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.11	displaystring	read-only	Access concentrator name for paepvc.
dtpvcServiceName	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.12	displaystring	read-only	Service name for paepvc.
dtpvcHelloTime	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.13	integer	read-only	The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
dtpvcAuto	1.3.6.1.4.1.6321.1.2.3.3.8.13.1.1.14	integer	read-only	Enable/disable auto detection for PPPoE/PPPoA encapsulation. Enumeration: 'enable': 1, 'disable': 2.
dtpvcStateTable	1.3.6.1.4.1.6321.1.2.3.3.8.13.2		no-access	This table show current DTPVC status.
dtpvcStateEntry	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1		no-access	An entry in dtpvcStateTable.
dtpvcStateVpi	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.1	integer	read-only	VPI of the dtpvc.
dtpvcStateVci	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.2	integer	read-only	VCI of the dtpvc.
dtpvcStateSvid	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.3	vlanindex	read-only	Default S-VID of the dtpvc.
dtpvcStateSPriority	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.4	integer	read-only	S-priority of the dtpvc.
dtpvcStateCvid	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.5	vlanindex	read-only	Default C-VID of the dtpvc.
dtpvcStateCPriority	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.6	integer	read-only	C-priority of the dtpvc.
dtpvcStateChannelType	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.8	displaystring	read-only	The value of this object identifies the channel type at runtime.
dtpvcStateEncap	1.3.6.1.4.1.6321.1.2.3.3.8.13.2.1.9	displaystring	read-only	The value of this object identifies the channel encapsulation at runtime.
snrMgn	1.3.6.1.4.1.6321.1.2.3.3.8.15
snrMgnTable	1.3.6.1.4.1.6321.1.2.3.3.8.15.1		no-access	A table containing the per port SNR Margin configuration.
snrMgnEntry	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1		no-access	An entry of snrMgnTable.
snrMgnMode	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.1	integer	read-write	Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration. Enumeration: 'profile': 0, 'line': 1.
snrMgnUcTarget	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.2	integer	read-write	Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
snrMgnUcMax	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.3	integer	read-write	Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
snrMgnUcMin	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.4	integer	read-write	Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
snrMgnUcDownshift	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.5	integer	read-write	Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
snrMgnUcUpshift	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.6	integer	read-write	Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
snrMgnUrTarget	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.7	integer	read-write	Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
snrMgnUrMax	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.8	integer	read-write	Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
snrMgnUrMin	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.9	integer	read-write	Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
snrMgnUrDownshift	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.10	integer	read-write	Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
snrMgnUrUpshift	1.3.6.1.4.1.6321.1.2.3.3.8.15.1.1.11	integer	read-write	Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
dslRate	1.3.6.1.4.1.6321.1.2.3.3.8.16
dslRateTable	1.3.6.1.4.1.6321.1.2.3.3.8.16.1		no-access	A table containing the per port DSL Rate configuration.
dslRateEntry	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1		no-access	An entry of dslRateTable.
dslRateMode	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.1	integer	read-write	Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration. Enumeration: 'profile': 0, 'line': 1.
dslRateLatencyMode	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.2	integer	read-only	The latency mode is fast or interleave Enumeration: 'interleave': 1, 'fast': 2.
dslRateXtucMaxInterleaveDelay	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.3	integer	read-write	Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
dslRateXtucMaxTxRate	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.4	unsigned32	read-write	Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
dslRateXtucMinTxRate	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.5	unsigned32	read-write	Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps
dslRateXturMaxInterleaveDelay	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.6	integer	read-write	Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency
dslRateXturMaxTxRate	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.7	unsigned32	read-write	Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
dslRateXturMinTxRate	1.3.6.1.4.1.6321.1.2.3.3.8.16.1.1.8	unsigned32	read-write	Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
gbond	1.3.6.1.4.1.6321.1.2.3.3.8.51
gbondGroupTable	1.3.6.1.4.1.6321.1.2.3.3.8.51.1		no-access	A table containing the G.Bond configuration information for each bonding group of the device.
gbondGroupEntry	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1		no-access	An entry of gbondTable.
gbondGroupName	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.1	octet string	read-only	An administratively assigned string, which may be used to identify bonding group.
gbondGroupPorts	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.2	octet string	read-only	The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
gbondGroupUpRate	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.4	unsigned32	read-only	The UP stream rate.
gbondGroupDownRate	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.5	unsigned32	read-only	The DOWN stream rate.
gbondGroupRowStatus	1.3.6.1.4.1.6321.1.2.3.3.8.51.1.1.6	rowstatus	read-only	This object indicates the status of this entry.
profile	1.3.6.1.4.1.6321.1.2.3.3.9
sraShiftMarginProfile	1.3.6.1.4.1.6321.1.2.3.3.9.1
sraShiftMarginProfileTable	1.3.6.1.4.1.6321.1.2.3.3.9.1.1		no-access	This table includes sra shift margin related configuration.
sraShiftMarginProfileEntry	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1		no-access	An entry in ipqosProfileTable.
sraShiftMarginProfileName	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.1	displaystring	read-only	This object identifies a row in this table.
xtucConfDownshiftSnrMgn	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.2	integer	read-only	Specifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
xtucConfUpshiftSnrMgn	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.3	integer	read-only	Specifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
xtucConfDownshiftTime	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.4	integer	read-only	Specifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
xtucConfUpshiftTime	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.5	integer	read-only	Specifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
xturConfDownshiftSnrMgn	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.6	integer	read-only	Specifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
xturConfUpshiftSnrMgn	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.7	integer	read-only	Specifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
xturConfDownshiftTime	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.8	integer	read-only	Specifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
xturConfUpshiftTime	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.9	integer	read-only	Specifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
sraShiftMarginProfileStatus	1.3.6.1.4.1.6321.1.2.3.3.9.1.1.1.10	rowstatus	read-only	This object is used to create a new row or modify or delete an existing row in this table.
ipqosProfile	1.3.6.1.4.1.6321.1.2.3.3.9.8
maxNumOfIpqosProfiles	1.3.6.1.4.1.6321.1.2.3.3.9.8.1	integer	read-only	The maximum number of IPQOS profiles supported by the system.
ipqosProfileTable	1.3.6.1.4.1.6321.1.2.3.3.9.8.2		no-access	This table includes IPQOS related configuration.
ipqosProfileEntry	1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1		no-access	An entry in ipqosProfileTable.
ipqosProfileName	1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.1	displaystring	read-only	This object is used by the IPQOS profile table in order to identify a row of this table.
ipqosProfileNumOfQueue	1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.2	integer	read-only	The number of IPQOS queues.
ipqosProfileRowStatus	1.3.6.1.4.1.6321.1.2.3.3.9.8.2.1.3	rowstatus	read-only	This object is used to create a new row or delete an existing row in the table.
ipqosProfileQueueTable	1.3.6.1.4.1.6321.1.2.3.3.9.8.3		no-access	This table includes IPQOS queue related configuration.
ipqosProfileQueueEntry	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1		no-access	An entry in ipqosProfileQueueTable.
ipqosProfileQueueIndex	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.1	integer	read-only	IPQOS queue index.
ipqosProfileQueuePIR	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.2	integer	read-write	Peak rate.(multiple of 256)
ipqosProfileQueueCIR	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.3	integer	read-write	Commited rate.(multiple of 256)
ipqosProfileQueuePBS	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.4	integer	read-write	Peak burst size.(mutiple of 256)
ipqosProfileQueueCBS	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.5	integer	read-write	Commited burst size.(mutiple of 256)
ipqosProfileQueueLevel	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.6	integer	read-write	Queue level.
ipqosProfileQueueWeight	1.3.6.1.4.1.6321.1.2.3.3.9.8.3.1.7	integer	read-write	Queue weight.
switch	1.3.6.1.4.1.6321.1.2.3.3.10
dot3ad	1.3.6.1.4.1.6321.1.2.3.3.10.6
dot3adTable	1.3.6.1.4.1.6321.1.2.3.3.10.6.1		no-access	The table contains 802.3ad configuration.
dot3adEntry	1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1		no-access
dot3adGroupId	1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.1	integer	read-only	Group ID 1 for the subtending group and 2 for the uplink group.
dot3adEnable	1.3.6.1.4.1.6321.1.2.3.3.10.6.1.1.2	integer	read-write	Enable/disable 802.3ad function. Enumeration: 'enable': 1, 'disable': 3, 'enableWithLacp': 2.
lacpPriority	1.3.6.1.4.1.6321.1.2.3.3.10.6.2	integer	read-write	LACP system priority.
lacpTimeout	1.3.6.1.4.1.6321.1.2.3.3.10.6.3	integer	read-write	The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. Enumeration: 'longtimeout': 2, 'shorttimeout': 1.
portTrunkingTable	1.3.6.1.4.1.6321.1.2.3.3.10.6.4		no-access	The table contains current status of port trunking.
portTrunkingEntry	1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1		no-access
portTrunkingGroupId	1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.1	integer	read-only	Group ID 1 for the subtending group and 2 for the uplink group.
portTrunkingStatus	1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.2	integer	read-only	Port trunking status. Enumeration: 'down': 2, 'up': 1.
portTrunkingPortList	1.3.6.1.4.1.6321.1.2.3.3.10.6.4.1.3	portlist	read-only	The port list which actually joins the trunking group.
dscp	1.3.6.1.4.1.6321.1.2.3.3.10.10
dscpMappingTable	1.3.6.1.4.1.6321.1.2.3.3.10.10.1		no-access	The table contains DSCP mapping configuration for the adsl ports.
dscpMappingEntry	1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1		no-access	An entry of dscpMappingTable.
dscpSrcCodePoint	1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.1	integer	read-only	The DSCP source code point used for mapping.
dscpMapPriority	1.3.6.1.4.1.6321.1.2.3.3.10.10.1.1.3	integer	read-write	The mapping p bits that will replace the source p bits in the incoming packet.
dscpPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.10.2		no-access	The table contains DSCP mapping configuration for the adsl ports.
dscpPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1		no-access	An entry of dscpPortTable.
dscpStatusEnable	1.3.6.1.4.1.6321.1.2.3.3.10.10.2.1.1	integer	read-write	The DSCP port status. Enumeration: 'enable': 1, 'disable': 2.
vlanIsolation	1.3.6.1.4.1.6321.1.2.3.3.10.12
vlanIsolationTable	1.3.6.1.4.1.6321.1.2.3.3.10.12.1		no-access	A table contains configuration of isolated VLAN.
vlanIsolationEntry	1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1		no-access	An entry of vlanIsolationTable.
vlanIsolationRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.12.1.1.1	rowstatus	read-only	Row status of the table used to create/delete an entry.
enetMtu	1.3.6.1.4.1.6321.1.2.3.3.10.13
enetMtuEntry	1.3.6.1.4.1.6321.1.2.3.3.10.13.1	integer	read-write	Sets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526.
tpid	1.3.6.1.4.1.6321.1.2.3.3.10.14
tpidEntry	1.3.6.1.4.1.6321.1.2.3.3.10.14.1	unsigned32	read-write	Sets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF.
cfm	1.3.6.1.4.1.6321.1.2.3.3.10.15
cfmLoopbackPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.15.1		no-access	A table that contains CFM information.
cfmLoopbackPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1		no-access	An entry in cfmLoopbackPortTable.
cfmLoopbackPortState	1.3.6.1.4.1.6321.1.2.3.3.10.15.1.1.1	integer	read-write	CFM loopback enable/disable on the port. Enumeration: 'enable': 1, 'disable': 2.
cfmMIPTable	1.3.6.1.4.1.6321.1.2.3.3.10.15.2		no-access
cfmMIPEntry	1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1		no-access	An entry in cfmMIPTable.
cfmPort	1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.3	integer	no-access
cfmMIPRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.4	rowstatus	read-only
cfmMIPMacAddr	1.3.6.1.4.1.6321.1.2.3.3.10.15.2.1.5	physaddress	read-write	CFM MIP mac address
cfmActionEnableStatus	1.3.6.1.4.1.6321.1.2.3.3.10.15.3	integer	read-write	CFM Action enable status for the CO device Enumeration: 'enable': 1, 'disable': 2.
cfmMode	1.3.6.1.4.1.6321.1.2.3.3.10.15.4	integer	read-write	CFM follow standard mode Enumeration: 'modeYDot1731': 2, 'mode802Dot1Ag': 1.
cfmLbmTimeout	1.3.6.1.4.1.6321.1.2.3.3.10.15.5	integer	read-write	CFM LBM timeout, 100-86400 ms
cfmLbmDataTlvLength	1.3.6.1.4.1.6321.1.2.3.3.10.15.6	integer	read-write	CFM LBM data tlv length, 0-1400 bytes
cfmLbrTable	1.3.6.1.4.1.6321.1.2.3.3.10.15.7		no-access	A table that contains CFM LBR results.
cfmLbrEntry	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1		no-access	An entry in cfmLbrTable.
cfmLbmIndex	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.1	integer	read-only	CFM lbm index.
cfmLbrIndex	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.2	integer	read-only	CFM lbr index.
cfmLbrSrcMac	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.3	physaddress	read-only	CFM lbr source address.
cfmLbrStatus	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.4	integer	read-only	CFM lbr status. Enumeration: 'ready': 1, 'notready': 2, 'xmit': 3, 'timeout': 5, 'success': 4.
cfmLbrRtt	1.3.6.1.4.1.6321.1.2.3.3.10.15.7.1.5	integer	read-only	CFM lbr rtt in ms.
dhcp	1.3.6.1.4.1.6321.1.2.3.3.10.51
dhcpRelay82Table	1.3.6.1.4.1.6321.1.2.3.3.10.51.2		no-access	A table that contains DHCP Relay configuration.
dhcpRelay82Entry	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1		no-access	The entry of DHCP Relay table.
dhcpRelay82PrimaryServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.1	ipaddress	read-write	The IP address of the DHCP Relay primary server.
dhcpRelay82SecondaryServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.2	ipaddress	read-write	The IP address of the DHCP Relay secondary server.
dhcpRelay82ActiveServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.3	integer	read-only	The current active DHCP Relay server. Enumeration: 'fourth': 4, 'fifth': 5, 'primary': 1, 'third': 3, 'secondary': 2.
dhcpRelay82Enable	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.4	integer	read-only	Enable/disable DHCP relay and Option82 function. Enumeration: 'enable': 1, 'disable': 2.
dhcpRelay82Info	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.5	displaystring	read-only	User specific Option82 information.
dhcpRelay82RelayMode	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.6	integer	read-only	DHCP relay mode. Enumeration: 'auto': 1, 'all': 2.
dhcpRelay82Suboption2Enable	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.8	integer	read-only	Enable/disable Option 82 sub-option 2. Enumeration: 'enable': 1, 'disable': 2.
dhcpRelay82Suboption2Info	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.9	displaystring	read-only	User specified information for Option 82 sub-option 2.
dhcpRelay82EntryEnable	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.10	integer	read-only	Enable/disable DHCP Relay Enumeration: 'auto': 1, 'all': 2, 'disable': 3.
dhcpRelay82EntryOptionMode	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.11	integer	read-only	Option82 format. Enumeration: 'customer-remote-id': 3, 'private': 1, 'tr101': 2.
dhcpRelay82VlanIp	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.12	ipaddress	read-write	The IP address of the DHCP Relay interface for this VLAN.
dhcpRelay82VlanMask	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.13	integer	read-write	The network mask of the DHCP Relay interface for this VLAN.
dhcpRelay82VlanGateway	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.14	ipaddress	read-write	The gateway of the DHCP Relay interface for this VLAN.
dhcpRelay82ThirdServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.15	ipaddress	read-write	The IP address of the DHCP Relay third server.
dhcpRelay82FourthServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.16	ipaddress	read-write	The IP address of the DHCP Relay fourth server.
dhcpRelay82FifthServer	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.17	ipaddress	read-write	The IP address of the DHCP Relay fifth server.
dhcpRelay82ServerVid	1.3.6.1.4.1.6321.1.2.3.3.10.51.2.1.18	integer	read-write	The VID of the DHCP Relay server for this VLAN.
dhcpRelayTest	1.3.6.1.4.1.6321.1.2.3.3.10.51.8
dhcpRelayTestVid	1.3.6.1.4.1.6321.1.2.3.3.10.51.8.1	integer	read-write	Setting the VID of the test server.
dhcpRelayTestIp	1.3.6.1.4.1.6321.1.2.3.3.10.51.8.2	ipaddress	read-write	Setting the IP of the test server.
dhcpRelayTestOps	1.3.6.1.4.1.6321.1.2.3.3.10.51.8.3	integer	read-write	Set the object to 1 to test DHCP server.
dhcpRelayTestStatus	1.3.6.1.4.1.6321.1.2.3.3.10.51.8.4	displaystring	read-only	Display testing server status.
dhcpRelayArp	1.3.6.1.4.1.6321.1.2.3.3.10.51.9
dhcpRelayArpShowTable	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1		no-access	The table displays DHCP ARP.
dhcpRelayArpShowEntry	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1		no-access	An entry of dhcpRelayArpShowTable.
dhcpRelayArpShowVid	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.1	integer	read-only	Display the VID of the DHCP ARP entry.
dhcpRelayArpShowIp	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.2	ipaddress	read-only	Display the IP of the DHCP ARP entry.
dhcpRelayArpShowMac	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.1.1.3	physaddress	read-only	Display the MAC of the DHCP ARP entry.
dhcpRelayArpFlushOps	1.3.6.1.4.1.6321.1.2.3.3.10.51.9.2	integer	read-write	Set the object to 1 to start flushing.
macfilter	1.3.6.1.4.1.6321.1.2.3.3.10.53
macFilterPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.53.1		no-access	This table includes the status of mac filtering for each port.
macFilterPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1		no-access	An entry in macFilterPortTable.
macFilterPortEnable	1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.1	integer	read-write	Enable/disable MAC filtering for the port. Enumeration: 'enableMacFilter': 1, 'enableMacCount': 2, 'disable': 4, 'enableMacFilterAndMacCount': 5.
macFilterPortMacCount	1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.2	integer	read-write	The total number of MAC addresses allowed for the port.
macFilterPortFilterMode	1.3.6.1.4.1.6321.1.2.3.3.10.53.1.1.3	integer	read-write	The mac filter mode (accept or deny) for the port. Enumeration: 'deny': 2, 'accept': 1.
maxNumOfMacFiltersInSystem	1.3.6.1.4.1.6321.1.2.3.3.10.53.2	integer	read-only	The max number of mac filters supported in the system.
maxNumOfMacFiltersPerPort	1.3.6.1.4.1.6321.1.2.3.3.10.53.3	integer	read-only	The max number of mac filters supported per port.
currNumOfMacFiltersInSystem	1.3.6.1.4.1.6321.1.2.3.3.10.53.4	integer	read-only	The current number of mac filters in the system.
macFilterTable	1.3.6.1.4.1.6321.1.2.3.3.10.53.5		no-access	A table that contains the mac filter addresses.
macFilterEntry	1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1		no-access	The entry of macFilterTable.
macFilterAddr	1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.1	physaddress	read-only	The mac address which can pass through or be rejected from the port.
macFilterRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.53.5.1.2	rowstatus	read-only	The row status of the entry.
macfilterBatchSet	1.3.6.1.4.1.6321.1.2.3.3.10.53.6
macfilterTarget	1.3.6.1.4.1.6321.1.2.3.3.10.53.6.1	octet string	read-write	This managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis) Byte 2~3: 0, Reserved(slot) Byte 4: 0, reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
macfilterOps	1.3.6.1.4.1.6321.1.2.3.3.10.53.6.2	integer	read-write	The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable mac filter BIT 4: set mac count BIT 5: disable mac count filter.
macFilterMacCountForBatchSet	1.3.6.1.4.1.6321.1.2.3.3.10.53.6.3	integer	read-write	The total number of MAC addresses allowed for a port.
ouiFilterTable	1.3.6.1.4.1.6321.1.2.3.3.10.53.7		no-access	A table that contains the OUI filter addresses.
ouiFilterEntry	1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1		no-access	The entry of ouiFilterTable.
ouiFilterAddr	1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.1	octet string	read-only	The first three bytes of the mac address which can pass through or be rejected from the port.
ouiFilterRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.53.7.1.2	rowstatus	read-only	The row status of the entry.
maxNumOfOuiFiltersPerPort	1.3.6.1.4.1.6321.1.2.3.3.10.53.8	integer	read-only	The max number of OUI filters supported per port.
ouiFilterPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.53.9		no-access	This table includes the status of oui filtering for each port.
ouiFilterPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1		no-access	An entry in macFilterPortTable.
ouiFilterPortEnable	1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.1	integer	read-write	Enable/disable oui filtering for the port. Enumeration: 'enableOuiFilter': 1, 'disable': 2.
ouiFilterPortFilterMode	1.3.6.1.4.1.6321.1.2.3.3.10.53.9.1.2	integer	read-write	The oui filter mode (accept or deny) for the port. Enumeration: 'deny': 2, 'accept': 1.
dhcpSnoop	1.3.6.1.4.1.6321.1.2.3.3.10.55
dhcpSnoopPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.55.1		no-access	This table includes DHCP snooping enable/disable for each port.
dhcpSnoopPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1		no-access	An entry of dhcpSnoopPortTable.
dhcpSnoopEnable	1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.1	integer	read-write	Enable/disable DHCP snooping for a port. Enumeration: 'enable': 1, 'disable': 2.
dhcpSnoopMaxcnt	1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.2	integer	read-write	Set the max entries of the DHCP ARP table.
dhcpSnoopSmacverifyEnable	1.3.6.1.4.1.6321.1.2.3.3.10.55.1.1.3	integer	read-write	Enable/disable DHCP source MAC verify for a port. Enumeration: 'enable': 1, 'disable': 2.
dhcpSnoopTarget	1.3.6.1.4.1.6321.1.2.3.3.10.55.2	octet string	read-write	This managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight chassis, chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11:each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
dhcpSnoopOps	1.3.6.1.4.1.6321.1.2.3.3.10.55.3	integer	read-write	The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
dhcpStaticTable	1.3.6.1.4.1.6321.1.2.3.3.10.55.4		no-access	This table defines DHCP static IP addresses.
dhcpStaticEntry	1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1		no-access	An entry of dhcpStaticTable.
dhcpStaticIpAddr	1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.1	ipaddress	read-only	The IP address which can pass through the port.
dhcpStaticRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.55.4.1.2	rowstatus	read-only	Row status of the table entry.
maxNumOfDhcpStaticIp	1.3.6.1.4.1.6321.1.2.3.3.10.55.5	integer	read-only	The maximum number of DHCP static IP addresses which can be created for a port.
dhcpSnoopMaxcntMode	1.3.6.1.4.1.6321.1.2.3.3.10.55.6	integer	read-write	When DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1. Enumeration: 'drop': 2, 'replace': 1.
acl	1.3.6.1.4.1.6321.1.2.3.3.10.56
aclSetTable	1.3.6.1.4.1.6321.1.2.3.3.10.56.1		no-access	aclsetTable.
aclSetEntry	1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1		no-access	An entry of aclSetTable.
aclSetVpi	1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.1	integer	read-only	VPI value
aclSetVci	1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.2	integer	read-only	VCI value
aclSetProfileName	1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.3	displaystring	read-only	ACL Profile name
aclSetRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.56.1.1.4	rowstatus	read-write	RowStatus of aclSetEntry
aclProfileTable	1.3.6.1.4.1.6321.1.2.3.3.10.56.2		no-access	aclProfileTable.
aclProfileEntry	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1		no-access	An entry of aclProfileTable.
aclProfileRuleName	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.1	displaystring	read-only	Profile rule name
aclProfileRuleNumber	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.2	integer	read-write	The managed object is for acl profile rule configuration. etype vlan (1), etype smac (2), etype dmac (3), vlan smac (4), vlan dmac (5), smac dmac (6), vlan priority (7), etype (8), vlan (9), smac (10), dmac (11), priority (12), protocol (13), vlan sip (14), vlan dip (15), vlan sport tcp\|udp (16), vlan dport tcp\|udp (17)
aclProfileActionNumber	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.3	integer	read-write	Profile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
aclProfileRuleParamMask	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.4	integer	read-write	Profile rule parameter mask. BIT 1: srcip / BIT 2: dstip / BIT 3: tos BIT 4: srcport BIT 5: dstport
aclProfileRuleEtype	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.5	integer	read-write	Profile rule etype
aclProfileRuleVid	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.6	integer	read-write	Profile rule vid
aclProfileRuleSmac	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.7	physaddress	read-write	Profile rule source MAC
aclProfileRuleDmac	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.8	physaddress	read-write	Profile rule destination MAC
aclProfileRulePriority	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.9	integer	read-write	Profile rule priority
aclProfileRuleProtocol	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.10	integer	read-write	Profile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
aclProfileActionRate	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.21	integer	read-write	Profile action to replace to this rate
aclProfileActionrvlan	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.22	integer	read-write	Profile action to replace to this vlan
aclProfileActionrpri	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.23	integer	read-write	Profile action to replace to this priority
aclProfileRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.24	rowstatus	read-write	The row status of the entry.
aclProfileRuleSip	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.25	ipaddress	read-only	Source IP.
aclProfileRuleDip	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.26	ipaddress	read-only	Destination IP.
aclProfileRuleSport	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.27	integer	read-only	Source port.
aclProfileRuleDport	1.3.6.1.4.1.6321.1.2.3.3.10.56.2.1.28	integer	read-only	Destination port.
pppoeAgent	1.3.6.1.4.1.6321.1.2.3.3.10.57
pppoeAgentTable	1.3.6.1.4.1.6321.1.2.3.3.10.57.1		no-access	A table that contains PPPoE intermediate agent configuration.
pppoeAgentEntry	1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1		no-access	An entry of pppoeAgentTable.
pppoeAgentEnable	1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.1	integer	read-only	Enable/disable PppoE intermediate agent function. Enumeration: 'enable': 1, 'disable': 2.
pppoeAgentInfo	1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.2	displaystring	read-only	User specific Option82 information.
pppoeAgentRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.3	rowstatus	read-only	Row status of the table entry.
pppoeAgentOptionMode	1.3.6.1.4.1.6321.1.2.3.3.10.57.1.1.4	integer	read-only	Option82 format. Enumeration: 'private': 1, 'tr101': 2.
maxNumOfPppoeAgentConf	1.3.6.1.4.1.6321.1.2.3.3.10.57.2	integer	read-only	The maximum number of rows that can be created in pppoeAgentTable.
n1mac	1.3.6.1.4.1.6321.1.2.3.3.10.58
n1macReplaceMac	1.3.6.1.4.1.6321.1.2.3.3.10.58.1	macaddress	read-only	This MAC address will be used to replace client's MAC address.
n1macPortTable	1.3.6.1.4.1.6321.1.2.3.3.10.58.2		no-access	The table contains N to 1 MAC configuration for DSL ports.
n1macPortEntry	1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1		no-access	An entry of n1macPortTable.
n1macStatusEnable	1.3.6.1.4.1.6321.1.2.3.3.10.58.2.1.1	integer	read-write	The port status of n1mac function. Enumeration: 'enable': 1, 'disable': 2.
macff	1.3.6.1.4.1.6321.1.2.3.3.10.60
macFfTable	1.3.6.1.4.1.6321.1.2.3.3.10.60.1		no-access	A table that contains MAC Force Forwarding configuration.
macFfEntry	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1		no-access	An entry of macFfTable.
macFfIndex	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.1	integer	read-only	Index of the MACFF.
macFfVid	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.2	integer	read-write	The VLAN-ID refering to this AR/AS.
macFfArIP	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.3	ipaddress	read-write	IP of this AR/AS
macFfSrcIP	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.4	ipaddress	read-write	The source IP address of the MACFF.
macFfSrcMask	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.5	integer	read-write	The subnet mask of source IP mask.
macFfRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.60.1.1.6	rowstatus	read-only	The row status of the MacFfEntry entry.
macFfArpFlush	1.3.6.1.4.1.6321.1.2.3.3.10.60.3	integer	read-write	Set the object to 1 to flush mac table.
maxNumOfMacFfVlanInSystem	1.3.6.1.4.1.6321.1.2.3.3.10.60.4	integer	read-only	The max number of macff Vlans supported in the system.
macFfVlanTable	1.3.6.1.4.1.6321.1.2.3.3.10.60.5		no-access	A table that contains MAC Force Forwarding Vlan configuration.
macFfVlanEntry	1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1		no-access	An entry of macFfVlanTable.
macFfVlanRowstatus	1.3.6.1.4.1.6321.1.2.3.3.10.60.5.1.1	rowstatus	read-only	Row status of the table used to create/delete an entry.
macFfStaticIPTable	1.3.6.1.4.1.6321.1.2.3.3.10.60.6		no-access
macFfStaticIPEntry	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1		no-access	An entry of macFfTable.
macFfStaticIPPort	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.1	integer	read-only	The port number, 1 ~ 48.
macFfStaticIPVid	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.2	integer	read-only	VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
macFfstaticIP	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.3	ipaddress	read-only	The specified IP range.
macFfStaticIPMask	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.4	integer	read-only	Mask_bits is 24 .. 32.
macFfStaticIPRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.60.6.1.5	rowstatus	read-only	The row status used to configure the table entry.
macFfServerMacTable	1.3.6.1.4.1.6321.1.2.3.3.10.60.7		no-access
macFfServerMacEntry	1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1		no-access	An entry of macFfTable.
macFfServerMacVid	1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.1	integer	read-only	VLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
macFfServerMacAddr	1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.2	physaddress	read-only	The mac address.
macFfServerMacRowStatus	1.3.6.1.4.1.6321.1.2.3.3.10.60.7.1.3	rowstatus	read-only	The row status used to configure the table entry.
sys	1.3.6.1.4.1.6321.1.2.3.3.11
timeSetup	1.3.6.1.4.1.6321.1.2.3.3.11.4
dayLightSaving	1.3.6.1.4.1.6321.1.2.3.3.11.4.7
dayLightSavingAdminStatus	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.1	integer	read-write	Enumeration: 'enable': 1, 'disable': 2.
dayLightSavingStartTime	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2
dayLightSavingStartMonth	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.1	integer	read-write	Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
dayLightSavingStartWeek	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.2	integer	read-write	Enumeration: 'second': 2, 'last': 5, 'fourth': 4, 'third': 3, 'first': 1.
dayLightSavingStartWday	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.3	integer	read-write	Enumeration: 'wed': 4, 'sun': 1, 'th': 5, 'tus': 3, 'mon': 2, 'fri': 6, 'sat': 7.
dayLightSavingStartHour	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.2.4	integer	read-write	1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00 Enumeration: 'h23h00': 23, 'h7h00': 7, 'h12h00': 12, 'h0h00': 0, 'h10h00': 10, 'h11h00': 11, 'h9h00': 9, 'h17h00': 17, 'h21h00': 21, 'h8h00': 8, 'h18h00': 18, 'h3h00': 3, 'h19h00': 19, 'h15h00': 15, 'h16h00': 16, 'h2h00': 2, 'h4h00': 4, 'h1h00': 1, 'h6h00': 6, 'h5h00': 5, 'h22h00': 22, 'h14h00': 14, 'h20h00': 20, 'h13h00': 13.
dayLightSavingEndTime	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3
dayLightSavingEndMonth	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.1	integer	read-write	Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
dayLightSavingEndWeek	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.2	integer	read-write	Enumeration: 'second': 2, 'last': 5, 'fourth': 4, 'third': 3, 'first': 1.
dayLightSavingEndWday	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.3	integer	read-write	Enumeration: 'wed': 4, 'sun': 1, 'th': 5, 'tus': 3, 'mon': 2, 'fri': 6, 'sat': 7.
dayLightSavingEndHour	1.3.6.1.4.1.6321.1.2.3.3.11.4.7.3.4	integer	read-write	1h 01h00, 2h 02h00 3h 03h00 4h 04h00 5h 05h00 6h 06h00 7h 07h00 8h 08h00 9h 09h00 10h 10h00 11h 11h00 12h 12h00 13h 13h00 14h 14h00 15h 15h00 16h 16h00 17h 17h00 18h 18h00 19h 19h00 20h 20h00 21h 21h00 22h 22h00 23h 23h00 Enumeration: 'h23h00': 23, 'h7h00': 7, 'h12h00': 12, 'h0h00': 0, 'h10h00': 10, 'h11h00': 11, 'h9h00': 9, 'h17h00': 17, 'h21h00': 21, 'h8h00': 8, 'h18h00': 18, 'h3h00': 3, 'h19h00': 19, 'h15h00': 15, 'h16h00': 16, 'h2h00': 2, 'h4h00': 4, 'h1h00': 1, 'h6h00': 6, 'h5h00': 5, 'h22h00': 22, 'h14h00': 14, 'h20h00': 20, 'h13h00': 13.
accessCtrl	1.3.6.1.4.1.6321.1.2.3.3.11.5
securedClientTable	1.3.6.1.4.1.6321.1.2.3.3.11.5.2		no-access	A table that contains information about secured clients.
securedClientEntry	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1		no-access	A list of secured client entry.
securedClientIndex	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.1	integer	read-only	The index of the entry.
securedClientStartIp	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.2	ipaddress	read-write	The starting IP address of the secured client set.
securedClientEndIp	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.3	ipaddress	read-write	The ending IP address of the secured client set.
securedClientService	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.4	integer	read-write	Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions areh BIT 1h telnet BIT 2h ftp BIT 3h web BIT 4h icmp BIT 5h not support BIT 6h snmp.
securedClientEnable	1.3.6.1.4.1.6321.1.2.3.3.11.5.2.1.5	integer	read-write	Enable/disable the entry. Enumeration: 'enable': 1, 'disable': 2.
extAlarm	1.3.6.1.4.1.6321.1.2.3.3.11.8
extAlarmTable	1.3.6.1.4.1.6321.1.2.3.3.11.8.1		no-access	A table that contains external alarm information.
extAlarmEntry	1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1		no-access	The entry of external alarm table.
extAlarmIndex	1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.1	integer	read-only	The index of the entry.
extAlarmName	1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.2	displaystring	read-write	The external alarm name.
extAlarmStatus	1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.3	displaystring	read-only	Display 'Normal' or 'Alarm' string
extAlarmTriggeredMode	1.3.6.1.4.1.6321.1.2.3.3.11.8.1.1.4	integer	read-write	The external alarm triggered mode. Enumeration: 'closeAlarm': 1, 'openAlarm': 2.
user	1.3.6.1.4.1.6321.1.2.3.3.11.9
userAuthMode	1.3.6.1.4.1.6321.1.2.3.3.11.9.1	integer	read-write	User authentication procsssing mode. Enumeration: 'radius': 2, 'local': 1, 'localThenRadius': 3.
userAuthServerIp	1.3.6.1.4.1.6321.1.2.3.3.11.9.2	ipaddress	read-write	The IP address of the authentication server.
userAuthServerPort	1.3.6.1.4.1.6321.1.2.3.3.11.9.3	integer	read-write	The port of the authentication server.
userAuthServerSecret	1.3.6.1.4.1.6321.1.2.3.3.11.9.4	octet string	read-write	The secret between the authentication server and the NE for authentication process.
userTable	1.3.6.1.4.1.6321.1.2.3.3.11.9.5		no-access	A table that contains user information.
userEntry	1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1		no-access	An entry of userTable.
userName	1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.1	displaystring	read-only	The user name.
userPassword	1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.2	displaystring	read-only	The user password.
userPriviledge	1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.3	integer	read-only	The user priviledge to decide what operation the user can and cannot do. Enumeration: 'high': 1, 'middle': 2, 'low': 3.
userRowStatus	1.3.6.1.4.1.6321.1.2.3.3.11.9.5.1.4	rowstatus	read-only	The row status used to create or delete a user.
userAuthDefaultPriviledge	1.3.6.1.4.1.6321.1.2.3.3.11.9.6	integer	read-write	The user default priviledge to be assigned when radius authentication succeeds but no user priviledge information(radius service-type) is provided. Enumeration: 'high': 1, 'middle': 2, 'deny': 4, 'low': 3.
usbCastCtrl	1.3.6.1.4.1.6321.1.2.3.3.11.10
usBcastCtrlEnable	1.3.6.1.4.1.6321.1.2.3.3.11.10.1	integer	read-write	Enable/disable upstream broadcast control. Enumeration: 'enable': 1, 'disable': 2.
usBcastCtrlRate	1.3.6.1.4.1.6321.1.2.3.3.11.10.2	integer	read-write
dsQos	1.3.6.1.4.1.6321.1.2.3.3.11.11
dsQosEnableMode	1.3.6.1.4.1.6321.1.2.3.3.11.11.1	integer	read-write	Enable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode. Enumeration: 'ippre': 4, 'disable': 1, 'dscp': 3, 'vlan': 2.
dsQosDefaultPri	1.3.6.1.4.1.6321.1.2.3.3.11.11.2	integer	read-write	Set the internal default p.bit after overiding. All values not configured in the overriding table are assigned to the default p.bit
dsQoSOverridingTable	1.3.6.1.4.1.6321.1.2.3.3.11.11.3		no-access	This table includes downstream QoS overriding information.
dsQoSOverridingEntry	1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1		no-access	An entry in dsQoSOverridingTable.
dsQosPriority	1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.1	integer	read-only	Internal P.bit after overriding.
dsQosValueList	1.3.6.1.4.1.6321.1.2.3.3.11.11.3.1.2	displaystring	read-write	VLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured. VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list exampleh <1>, <1,3>, <1,5,6~10>.
stdioTimeout	1.3.6.1.4.1.6321.1.2.3.3.11.12	integer	read-write	Set the stdio timeout, 0~300 minutes.
isConfigChanged	1.3.6.1.4.1.6321.1.2.3.3.11.13	integer	read-only	If system configuration has been changed. Enumeration: 'yes': 1, 'no': 2.
fwUpgrade	1.3.6.1.4.1.6321.1.2.3.3.11.14
fwUpgradeVersion	1.3.6.1.4.1.6321.1.2.3.3.11.14.1	octet string	read-write	Configure the target firmware version that will be upgraded.
fwUpgradeCheck	1.3.6.1.4.1.6321.1.2.3.3.11.14.2	integer	read-write	Enable/disable firmware upgrade version checking feature. Enumeration: 'enable': 1, 'disable': 2.
fwUpgradeStatus	1.3.6.1.4.1.6321.1.2.3.3.11.14.3	displaystring	read-only	Display current firmware upgrade status.
delayedReboot	1.3.6.1.4.1.6321.1.2.3.3.11.15
delayedRebootTimer	1.3.6.1.4.1.6321.1.2.3.3.11.15.1	integer	read-write	5~1800 secs, 0h reboot immediately.
delayedRebootRemainingTime	1.3.6.1.4.1.6321.1.2.3.3.11.15.2	integer	read-only	Display the remaining time of scheduled reboot.
delayedRebootCancel	1.3.6.1.4.1.6321.1.2.3.3.11.15.3	integer	read-write	cancel the scheduled reboot. Enumeration: 'cancel': 1.
trap	1.3.6.1.4.1.6321.1.2.3.3.12
statistics	1.3.6.1.4.1.6321.1.2.3.3.13
igmpQueryCntTotal	1.3.6.1.4.1.6321.1.2.3.3.13.1	counter32	read-only	The total number of IGMP query messages received.
igmpReportCntTotal	1.3.6.1.4.1.6321.1.2.3.3.13.2	counter32	read-only	The total number of IGMP report messages received.
igmpLeaveCntTotal	1.3.6.1.4.1.6321.1.2.3.3.13.3	counter32	read-only	The total number of IGMP leave messages received.
igmpNumOfActiveGroups	1.3.6.1.4.1.6321.1.2.3.3.13.4	integer	read-only	The total number of IGMP learned groups.
igmpGroupTable	1.3.6.1.4.1.6321.1.2.3.3.13.5		no-access	This table includes igmp group information.
igmpGroupEntry	1.3.6.1.4.1.6321.1.2.3.3.13.5.1		no-access	An entry in igmpGroupTable.
igmpGroupIp	1.3.6.1.4.1.6321.1.2.3.3.13.5.1.1	ipaddress	read-only	igmp group IP
igmpGroupvid	1.3.6.1.4.1.6321.1.2.3.3.13.5.1.2	integer	read-only	vlan id
igmpGroupnumberOfMembers	1.3.6.1.4.1.6321.1.2.3.3.13.5.1.3	integer	read-only	number Of Members
igmpGroupMemberPorts	1.3.6.1.4.1.6321.1.2.3.3.13.5.1.4	portlist	read-only	Group Member Ports
igmpGroupPortTable	1.3.6.1.4.1.6321.1.2.3.3.13.6		no-access	This table includes igmp Group port information.
igmpGroupPortEntry	1.3.6.1.4.1.6321.1.2.3.3.13.6.1		no-access	An entry in igmpGroupPortTable.
igmpGroupPortIp	1.3.6.1.4.1.6321.1.2.3.3.13.6.1.1	ipaddress	read-only	Igmp Group IP
igmpGroupPortvid	1.3.6.1.4.1.6321.1.2.3.3.13.6.1.2	integer	read-only	Igmp Group vid
igmpGroupV2Table	1.3.6.1.4.1.6321.1.2.3.3.13.7		no-access	A table that displays IGMP learned group member information.
igmpGroupV2Entry	1.3.6.1.4.1.6321.1.2.3.3.13.7.1		no-access	An entry of igmpGroupV2Table.
igmpGroupV2Vid	1.3.6.1.4.1.6321.1.2.3.3.13.7.1.1	vlanindex	read-only	The IGMP group VLAN ID.
igmpGroupV2Ip	1.3.6.1.4.1.6321.1.2.3.3.13.7.1.2	ipaddress	read-only	The multicast IP address.
igmpGroupV2NumOfMembers	1.3.6.1.4.1.6321.1.2.3.3.13.7.1.3	integer	read-only	The number of member ports in the group.
igmpGroupV2MemberPorts	1.3.6.1.4.1.6321.1.2.3.3.13.7.1.4	portlist	read-only	The member port list of the group.
igmpGroupPortV2Table	1.3.6.1.4.1.6321.1.2.3.3.13.8		no-access	A table that displays IGMP joined groups in this port.
igmpGroupPortV2Entry	1.3.6.1.4.1.6321.1.2.3.3.13.8.1		no-access	An entry of igmpGroupPortV2Table.
igmpGroupPortV2Vid	1.3.6.1.4.1.6321.1.2.3.3.13.8.1.1	vlanindex	read-only	The IGMP group VLAN ID.
igmpGroupPortV2Ip	1.3.6.1.4.1.6321.1.2.3.3.13.8.1.2	ipaddress	read-only	The multicast IP address.
igmpGroupPortV2SourceIp	1.3.6.1.4.1.6321.1.2.3.3.13.8.1.3	ipaddress	read-only	The source IP address that joins the IGMP group.
igmpPortCtrlPduTable	1.3.6.1.4.1.6321.1.2.3.3.13.9		no-access	A table that displays IGMP related counter values in this port.
igmpPortCtrlPduEntry	1.3.6.1.4.1.6321.1.2.3.3.13.9.1		no-access	An entry of igmpPortCtrlPduTable.
igmpPortCtrlPduQueryCnt	1.3.6.1.4.1.6321.1.2.3.3.13.9.1.1	counter32	read-only	The total number of IGMP query messages received in this port.
igmpPortCtrlPduReportCnt	1.3.6.1.4.1.6321.1.2.3.3.13.9.1.2	counter32	read-only	The total number of IGMP report messages received in this port.
igmpPortCtrlPduLeaveCnt	1.3.6.1.4.1.6321.1.2.3.3.13.9.1.3	counter32	read-only	The total number of IGMP leave messages received in this port.
igmpPortNumOfActiveGroups	1.3.6.1.4.1.6321.1.2.3.3.13.9.1.4	integer	read-only	The total number of active IGMP groups in this port.
igmpPortCtrlAuditLeaveCnt	1.3.6.1.4.1.6321.1.2.3.3.13.9.1.5	counter32	read-only	The total number of groups left by audit query.
dhcpStats	1.3.6.1.4.1.6321.1.2.3.3.13.11
dhcpSnoopIpTable	1.3.6.1.4.1.6321.1.2.3.3.13.11.1		no-access	This table shows the IP addresses and netmasks offered by the DHCP server.
dhcpSnoopIpEntry	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1		no-access	An entry of dhcpSnoopIpTable.
dhcpSnoopIp	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.1	ipaddress	read-only	The snooped IP address.
dhcpSnoopMac	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.2	physaddress	read-only	The snooped MAC address.
dhcpSnoopVid	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.3	vlanindex	read-only	The snooped VLAN ID.
dhcpSnoopMask	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.4	integer	read-only	The snooped IP mask
dhcpSnoopGateway	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.5	ipaddress	read-only	The snooped Gateway.
dhcpSnoopRouteMap	1.3.6.1.4.1.6321.1.2.3.3.13.11.1.1.6	octet string	read-only	The refrence bit map of the dhcp route
dhcpSnoopCounterTable	1.3.6.1.4.1.6321.1.2.3.3.13.11.2		no-access	This table shows the DHCP statistics.
dhcpSnoopCounterEntry	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1		no-access	An entry of dhcpSnoopCounterTable.
dhcpDiscovery	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.1	counter64	read-only	The total number of received DHCP server discovery packets.
dhcpOffer	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.2	counter64	read-only	The total number of received DHCP server offer packets.
dhcpRequest	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.3	counter64	read-only	The total number of received DHCP IP request packets.
dhcpAck	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.4	counter64	read-only	The total number of received DHCP IP acknowledge packets.
dhcpAckBySnoopFull	1.3.6.1.4.1.6321.1.2.3.3.13.11.2.1.5	counter64	read-only	The total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
dhcpRouteTable	1.3.6.1.4.1.6321.1.2.3.3.13.11.3		no-access	A table that contains dhcp route information.
dhcpRouteEntry	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1		no-access	An entry of dhcpRouteTable.
dhcpRouteIndex	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.1	integer	read-only
dhcpRouteVid	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.2	vlanindex	read-only	The VLAN-ID refering to this dhcp route.
dhcpRouteIP	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.3	ipaddress	read-only	IP of this dhcp route
dhcpRouteMask	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.4	integer	read-only	The subnet mask of source IP mask.
dhcpRouteGwIP	1.3.6.1.4.1.6321.1.2.3.3.13.11.3.1.5	ipaddress	read-only	The gateway IP address.
paepvcStats	1.3.6.1.4.1.6321.1.2.3.3.13.12
paepvcSessionTable	1.3.6.1.4.1.6321.1.2.3.3.13.12.1		no-access	This table shows the paepvc session statistics.
paepvcSessionEntry	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1		no-access	An entry of paepvcSessionTable.
paepvcSessionVpi	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.1	integer	read-only	The PAEPVC VPI.
paepvcSessionVci	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.2	integer	read-only	The PAEPVC VCI.
paepvcSessionState	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.3	integer	read-only	The PAEPVC status. Enumeration: 'down': 1, 'ppp': 3, 'pppoe': 2, 'up': 4.
paepvcSessionId	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.4	integer	read-only	The PAEPVC session ID.
paepvcSessionUptime	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.5	unsigned32	read-only	The PAEPVC session uptime.
paepvcSessionacname	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.6	displaystring	read-only	Access concentrator name.
paepvcSessionsrvcname	1.3.6.1.4.1.6321.1.2.3.3.13.12.1.1.7	displaystring	read-only	Service name.
paepvcCountTable	1.3.6.1.4.1.6321.1.2.3.3.13.12.2		no-access	This table shows the paepvc counters.
paepvcCountEntry	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1		no-access	An entry of paepvcCountTable.
paepvcCountVpi	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.1	integer	read-only	The PAEPVC VPI.
paepvcCountVci	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.2	integer	read-only	The PAEPVC VCI.
paepvcCountPppLcpCfgReqRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.3	unsigned32	read-only	The number of ppp lcp config-request received.
paepvcCountPppLcpEchoReqRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.4	unsigned32	read-only	The number of ppp lcp echo-request received.
paepvcCountPppLcpEchoReplyRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.5	unsigned32	read-only	The number of ppp lcp echo-reply received.
paepvcCountPadiTx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.6	unsigned32	read-only	The number of pppoe padi transfered
paepvcCountPadoRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.7	unsigned32	read-only	The number of pppoe pado received
paepvcCountPadrTx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.8	unsigned32	read-only	The number of pppoe padr transfered
paepvcCountPadsRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.9	unsigned32	read-only	The number of pppoe pads received
paepvcCountPadtTx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.10	unsigned32	read-only	The number of pppoe padt transfered
paepvcCountPadtRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.11	unsigned32	read-only	The number of pppoe padt received
paepvcCountSrvcnameErrRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.12	unsigned32	read-only	The number of pppoe service name error received
paepvcCountAcSystemErrRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.13	unsigned32	read-only	The number of pppoe access concentrator name error received
paepvcCountGenericErrTx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.14	unsigned32	read-only	The number of pppoe generic error transfered
paepvcCountGenericErrRx	1.3.6.1.4.1.6321.1.2.3.3.13.12.2.1.15	unsigned32	read-only	The number of pppoe generic error received
macStats	1.3.6.1.4.1.6321.1.2.3.3.13.13
macDisplayTarget	1.3.6.1.4.1.6321.1.2.3.3.13.13.1	integer	read-write	This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could beh 99h all ports in the system 98h all subscriber ports 97h all Ethernet ports IfIndex is used for identifying subscriber ports and Ethernet Ports(e.g. 1 ~ 50).
macTable	1.3.6.1.4.1.6321.1.2.3.3.13.13.2		no-access	A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
macEntry	1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1		no-access	An entry of macTable.
macAddress	1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.1	macaddress	read-only	A unicast MAC address for which the bridge has forwarding and/or filtering information.
macPort	1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.2	integer	read-only	The port from which the mac address has been learned.
macStatus	1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.3	integer	read-only	The status of this entry. Enumeration: 'learned': 3, 'other': 1, 'self': 4, 'invalid': 2, 'mgmt': 5.
macVid	1.3.6.1.4.1.6321.1.2.3.3.13.13.2.1.4	vlanindex	read-only	The vlan id of this entry.
n1macStats	1.3.6.1.4.1.6321.1.2.3.3.13.15
n1macTable	1.3.6.1.4.1.6321.1.2.3.3.13.15.1		no-access	A table that contains information about N to 1 MAC translation, including connection type, session id/IP and MAC address.
n1macEntry	1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1		no-access	An entry of n1macTable.
n1macProtoVal	1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.1	unsigned32	read-only	The protocol value of specified connection. If the connection is pppoe/pppoaoe, the value stands for session id; if the connection is ipoe/ipoaoe, the value means IP address.
n1macProtoType	1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.2	integer	read-only	Protocol type of the connection which the MAC is translated. Enumeration: 'unknown': 1, 'ipoe': 2, 'pppoe': 4, 'pppoaoe': 5, 'ipoaoe': 3.
n1macMacAddr	1.3.6.1.4.1.6321.1.2.3.3.13.15.1.1.3	macaddress	read-only	The translated MAC address.
enetStats	1.3.6.1.4.1.6321.1.2.3.3.13.16
enetPrimaryPort	1.3.6.1.4.1.6321.1.2.3.3.13.16.1	integer	read-only	IfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled.
enetSfpInfoTable	1.3.6.1.4.1.6321.1.2.3.3.13.16.2		no-access	This table includes sfp info of enet port.
enetSfpInfoEntry	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1		no-access	An entry in enetSfpInfoTable.
enetSfpInfoTxpower	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.1	integer	read-only	Measured Tx Output Power.
enetSfpInfoRxpower	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.2	integer	read-only	Measured Rx Output Power.
enetSfpInfoTemperature	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.3	integer	read-only	Measured temperature.
enetSfpInfoTxBias	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.4	integer	read-only	Measured tx bias.
enetSfpInfoVoltage	1.3.6.1.4.1.6321.1.2.3.3.13.16.2.1.5	integer	read-only	Measured voltage.
vdslStats	1.3.6.1.4.1.6321.1.2.3.3.13.17
vdslLineStatsTable	1.3.6.1.4.1.6321.1.2.3.3.13.17.2		no-access	The table displays VDSL line statistics.
vdslLineStatsEntry	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1		no-access	An entry of vdslLineStatsTable.
vdslLineStatsVtucBits1	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.1	octet string	read-only	The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVtucBits2	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.2	octet string	read-only	The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVtucBits3	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.3	octet string	read-only	The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVtucBits4	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.4	octet string	read-only	The object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVturBits1	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.5	octet string	read-only	The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVturBits2	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.6	octet string	read-only	The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVturBits3	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.7	octet string	read-only	The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVturBits4	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.8	octet string	read-only	The object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
vdslLineStatsVtucGain1	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.9	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain2	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.10	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain3	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.11	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain4	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.12	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain5	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.13	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain6	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.14	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain7	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.15	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucGain8	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.16	octet string	read-only	The object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain1	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.17	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain2	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.18	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain3	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.19	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain4	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.20	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain5	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.21	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain6	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.22	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain7	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.23	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVturGain8	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.24	octet string	read-only	The object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in this array is 16 bits wide. The gain value is represented as a multiple of 1/512 on linear scale.
vdslLineStatsVtucHlog	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.25	octet string	read-only	The object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group becauseit is out of the passband or that the attenuation is out of range to be represented. Each value in this array is 16 bits wide.
vdslLineStatsVturHlog	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.26	octet string	read-only	The object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/10), with m(i) in the range 0 to 1022. A special value m=1023 indicates that no measurement could be done for the sub-carrier group because it is out of the passband or that the attenuation is out ofrange to be represented. Each value in this array is 16 bits wide.
vdslLineStatsVtucQln	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.27	octet string	read-only	The object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide.
vdslLineStatsVturQln	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.28	octet string	read-only	The object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the range 0 to 254. A special value n(i)=255 indicates that no measurement could be done for the sub-carrier group. Each value in this array is 8 bits wide.
vdslLineStatsVtucSnr	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.29	octet string	read-only	The object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVtucSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide.
vdslLineStatsVturSnr	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.30	octet string	read-only	The object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-32 + vdslLineStatsVturSnr (i)/2) in dB (i.e., -32 to 95dB). Each value in this array is 8 bits wide.
vdslLineStatsVtucTssi	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.31	octet string	read-only	The object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale.
vdslLineStatsVturTssi	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.32	octet string	read-only	The object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi value is represented as a multiple of 1/32768 on linear scale.
vdslLineStatsProtocol	1.3.6.1.4.1.6321.1.2.3.3.13.17.2.1.33	integer	read-only	The actual line protocol. Enumeration: 'adsl2plus': 12, 'none': 1, 'gdmt': 9, 'adsl2': 11, 't1413': 13, 'vdsl17a': 8, 'vdsl12a': 6, 'glite': 10, 'vdsl12b': 7, 'vdsl8a': 2, 'vdsl8c': 4, 'vdsl8b': 3, 'vdsl8d': 5.
macffStats	1.3.6.1.4.1.6321.1.2.3.3.13.19
macFfStatsTable	1.3.6.1.4.1.6321.1.2.3.3.13.19.1		no-access	A table that contains MAC Force Forwarding static configuration and dynamic information.
macFfStatsEntry	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1		no-access	An entry of macFfStatsTable.
macFfStatsIndex	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.1	integer	read-only	Index of the MACFF.
macFfStatsVid	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.2	vlanindex	read-only	The VLAN-ID refering to this AR/AS.
macFfStatsArIP	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.3	ipaddress	read-only	IP of this AR/AS
macFfStatsSrcIP	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.4	ipaddress	read-only	The source IP address of the MACFF.
macFfStatsSrcMask	1.3.6.1.4.1.6321.1.2.3.3.13.19.1.1.5	integer	read-only	The subnet mask of source IP mask.
macFfArpTable	1.3.6.1.4.1.6321.1.2.3.3.13.19.2		no-access	A table that contains MAC Force Forwarding ARP information.
macFfArpEntry	1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1		no-access	An entry of macFfArpTable.
macFfArpVid	1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.1	vlanindex	read-only	The VLAN-ID refering to this AR/AS.
macFfArpIP	1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.2	ipaddress	read-only	IP of this AR/AS.
macFfArpPort	1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.3	integer	read-only	Port of this AR/AS.
macFfArpMac	1.3.6.1.4.1.6321.1.2.3.3.13.19.2.1.4	physaddress	read-only	MAC address of the AR or AS.
macFfArpCounterTable	1.3.6.1.4.1.6321.1.2.3.3.13.19.3		no-access	A table that contains MAC Force Forwarding ARP counter information.
macFfArpCounterEntry	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1		no-access	An entry of macFfArpCounterTable.
macFfArpCounterRequestTX	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.1	counter32	read-only	ARP Request TX counter.
macFfArpCounterRequestRX	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.2	counter32	read-only	ARP Request RX counter.
macFfArpCounterRequestRXDrop	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.3	counter32	read-only	ARP Request RX drop counter.
macFfArpCounterReplyTX	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.4	counter32	read-only	ARP Reply TX counter.
macFfArpCounterReplyRX	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.5	counter32	read-only	ARP Reply RX counter.
macFfArpCounterReplyRXDrop	1.3.6.1.4.1.6321.1.2.3.3.13.19.3.1.6	counter32	read-only	ARP Reply RX drop counter.
adslStats	1.3.6.1.4.1.6321.1.2.3.3.13.20
adslPortUtilTable	1.3.6.1.4.1.6321.1.2.3.3.13.20.1		no-access	This table includes adsl port utilization.
adslPortUtilEntry	1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1		no-access	An entry in adslPortUtilEntry.
adslPortUtilTx	1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.1	integer	read-only	Measure adsl port's tx utilization.
adslPortUtilRx	1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.2	integer	read-only	Measure adsl port's rx utilization.
adslStatsXturInp	1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.3	displaystring	read-only	XTUR minimum INP value.
adslStatsXtucInp	1.3.6.1.4.1.6321.1.2.3.3.13.20.1.1.4	displaystring	read-only	XTUC minimum INP valu.
clear	1.3.6.1.4.1.6321.1.2.3.3.14
counterClearTarget	1.3.6.1.4.1.6321.1.2.3.3.14.1	octet string	read-write	This managed object is used for identify the target on which the counter would be cleared. The target is encoded ash Byte 1h reserved Byte 2~3h reserved Byte 4h reserved Byte 5~11heach octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc.
counterClearOps	1.3.6.1.4.1.6321.1.2.3.3.14.2	integer	read-write	The corresponding bit is set to 1 to start the operation. The various bit positions areh BIT 1h clear interface counters BIT 2h clear pvc packet counters BIT 3h not support BIT 4h not support BIT 5h clear DHCP counters BIT 6h clear IGMP counters BIT 7h clear IGMP port counters
counterClearVpi	1.3.6.1.4.1.6321.1.2.3.3.14.3	integer	read-write	VPI of the pvc whose counters would be cleared.
counterClearVci	1.3.6.1.4.1.6321.1.2.3.3.14.4	integer	read-write	VCI of the pvc whose counters would be cleared.
aesSeriesCommon	1.3.6.1.4.1.6321.1.2.3.3.97
iesSeriesCommon	1.3.6.1.4.1.6321.1.2.3.3.98
accessSwitchCommonATM	1.3.6.1.4.1.6321.1.2.3.3.99