Dell-rndMng: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-rndMng
Download as:   
SNMPv2-CONF, IF-MIB, Dell-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rndMng 1.3.6.1.4.1.89.1
The private MIB module definition for RND general management MIB.
     rndSysId 1.3.6.1.4.1.89.1.1 integer read-only
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
     rndAction 1.3.6.1.4.1.89.1.2 integer read-write
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol. Enumeration: 'backupLanTab': 15, 'copyStartupToRunning': 25, 'eraseRunningCDB': 24, 'backupSPFRoutingTab': 12, 'sendLanTab': 6, 'backupIPRoutingTab': 13, 'deleteArpTab': 8, 'sendNetworkTab': 2, 'backupNetworkTab': 14, 'deleteDynamicLanTab': 23, 'deleteRoutingTab': 5, 'backupIPXSAPTab': 18, 'deleteLanTab': 7, 'backupArpTab': 16, 'sendArpTab': 9, 'deleteRouteTab': 10, 'sendRouteTab': 11, 'resetStartupCDB': 19, 'eraseStartupCDB': 20, 'reset': 1, 'none': 26, 'backupIPXRipTab': 17, 'deleteZeroHopRoutingAllocTab': 21, 'sendRoutingTab': 4, 'resetToFactoryDefaults': 27, 'slipDisconnect': 22, 'deleteNetworkTab': 3.
     rndFileName 1.3.6.1.4.1.89.1.3 octet string read-write
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
     rlSnmpVersionSupported 1.3.6.1.4.1.89.1.4 octet string read-only
Indicates the snmp versions that are supported by this device.
     rlSnmpMibVersion 1.3.6.1.4.1.89.1.5 integer read-only
Indicates the snmp support version that is supported by this device.
     rlCpuUtilEnable 1.3.6.1.4.1.89.1.6 truthvalue read-write
Enables measurement of the device CPU utilization. In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute and rlCpuUtilDuringLast5Minutes, the value of this object must be true.
     rlCpuUtilDuringLastSecond 1.3.6.1.4.1.89.1.7 integer read-only
Percentage of the device CPU utilization during last second. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last second).
     rlCpuUtilDuringLastMinute 1.3.6.1.4.1.89.1.8 integer read-only
Percentage of the device CPU utilization during last minute. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last minute).
     rlCpuUtilDuringLast5Minutes 1.3.6.1.4.1.89.1.9 integer read-only
Percentage of the device CPU utilization during the last 5 minutes. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last 5 minutes).
     rlRebootDelay 1.3.6.1.4.1.89.1.10 timeticks read-write
Setting the variable will cause the device to reboot rlRebootDelay timeticks from the moment this variable was set. If not set, the variable will return a value of 4294967295. If set to 4294967295, reboot action is cancelled. The maximum delay is set by the host parameter: reboot_delay_max
     rlGroupManagement 1.3.6.1.4.1.89.1.11
           rlGroupMngQuery 1.3.6.1.4.1.89.1.11.1 integer read-write
Setting value query will cause the device to query for UPNP devices on the network. The device will always return value idle for GET. Enumeration: 'query': 1, 'idle': 2.
           rlGroupMngQueryPeriod 1.3.6.1.4.1.89.1.11.2 integer read-write
Sets desired interval between queries for UPNP devices on the network. Setting 0 will result in no such query. Note that the actual query interval might be less than the set value if another application running in the device requested a shorter interval. Likewise setting 0 will not necessarily stop periodic queries if another application is still interested in periodic polling.
           rlGroupMngLastUpdate 1.3.6.1.4.1.89.1.11.3 timeticks read-only
The last time rlGroupMng MIB was updated.
           rlGroupMngDevicesTable 1.3.6.1.4.1.89.1.11.4 no-access
The table showing the discovered devices.
               rlGroupMngDeviceEntry 1.3.6.1.4.1.89.1.11.4.1 no-access
The row definition for this table.
                   rlGroupMngDeviceIdType 1.3.6.1.4.1.89.1.11.4.1.1 inetaddresstype no-access
The IP address type of the discovered device
                   rlGroupMngDeviceId 1.3.6.1.4.1.89.1.11.4.1.2 inetaddress no-access
The IP address of the discovered device
                   rlGroupMngSubdevice 1.3.6.1.4.1.89.1.11.4.1.3 integer no-access
A subdevice within the rlGroupMngDeviceId. Only subdevices with greatest specifity will be kept (specific UUID device is more specific than basic device which is in turn more specific than root device.
                   rlGroupMngDeviceDescription 1.3.6.1.4.1.89.1.11.4.1.4 displaystring read-only
The discovery protocol description of the device.
                   rlGroupMngGroupMngEnabled 1.3.6.1.4.1.89.1.11.4.1.5 truthvalue read-only
Indicates whether the device has Group Management enable.
                   rlGroupMngGroupLLDPDeviceId 1.3.6.1.4.1.89.1.11.4.1.6 displaystring read-only
The LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device.
                   rlGroupMngDeviceVendor 1.3.6.1.4.1.89.1.11.4.1.7 displaystring read-only
The vendor of the device. If empty the vendor is not known.
                   rlGroupMngDeviceAdvertisedCachingTime 1.3.6.1.4.1.89.1.11.4.1.8 integer read-only
The caching time advertised by the device. If no update for this device has been received during this caching time the system will assume that the device has left the network and will therefore remove its entry from the table.
                   rlGroupMngDeviceLocationURL 1.3.6.1.4.1.89.1.11.4.1.9 displaystring read-only
The URL inidicating the location of the XML presenting the details of the device.
                   rlGroupMngDeviceLastSeen 1.3.6.1.4.1.89.1.11.4.1.10 timeticks read-only
The value of sysUpTime at the moment of last reception of an update for this device.
     rlRunningCDBequalToStartupCDB 1.3.6.1.4.1.89.1.13 truthvalue read-only
Indicates whether there are changes in running CDB that were not saved in flash.
     rlClearMib 1.3.6.1.4.1.89.1.14 displaystring read-write
Clear MIB value for scalars or tables: Delete all entries for tables with dynamic entries. Set table entries default values for table with static entries. Set scalar default value.
     rlScheduledReload 1.3.6.1.4.1.89.1.15 displaystring read-write
Used for requesting a delayed reload of the device in a specific desired time, should be configured in one of the following formats: 'athhmmddMM' , 'inhhhmmm' or '', setting this value to an empty string will result in request for cancellation of a (previously) committed system reload. to complete the request, the 'rlScheduledReloadCommit' must also be set to either TRUE (apply) or FALSE (discard) for completion of the transaction. failing from doing so will result in an indefinite lock of the API
     rlScheduledReloadPendingDate 1.3.6.1.4.1.89.1.16 displaystring read-only
Displays the most recently requested scheduled-reload due date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no pending/scheduled reload request, string will be empty
     rlScheduledReloadApprovedDate 1.3.6.1.4.1.89.1.17 displaystring read-only
Displays the most recently approved/committed scheduled-reload date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no committed scheduled-reload , string will be empty
     rlScheduledReloadCommit 1.3.6.1.4.1.89.1.18 truthvalue read-write
commits the pending scheduled-reload request, and completes the transaction. when this value is set to TRUE, the system is instructed to perform the requested reload operation at the requested date/time as was given in 'rlScheduledReload'. setting this value to FALSE will discard the request.
     rlSysNameTable 1.3.6.1.4.1.89.1.19 no-access
Holds the current system name configuration.
           rlSysNameEntry 1.3.6.1.4.1.89.1.19.1 no-access
The row definition of this table.
               rlSysNameSource 1.3.6.1.4.1.89.1.19.1.1 integer no-access
The system name source. 'static' if defined by user through CLI, 'dhcpv6' or 'dhcpv4' if received by DHCP network protocol. Enumeration: 'dhcpv4': 2, 'dhcpv6': 1, 'static': 3.
               rlSysNameIfIndex 1.3.6.1.4.1.89.1.19.1.2 interfaceindex no-access
The IfIndex from which the system-name configuration was received, for static entries, value will always be 1.
               rlSysNameName 1.3.6.1.4.1.89.1.19.1.3 displaystring read-only
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
               rlSysNameRowStatus 1.3.6.1.4.1.89.1.19.1.4 rowstatus read-only
The row status variable, used according to row installation and removal conventions.