Dell-VRTX-DHCPCL-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-VRTX-DHCPCL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, Dell-VRTX-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlDhcpCl 1.3.6.1.4.1.89.76
This private MIB module defines DHCP CL private MIBs.
       rlDhcpClActionTable 1.3.6.1.4.1.89.76.3 no-access
The (conceptual) table mentione IP address which must be released/renewed on the interface.
           rlDhcpClActionEntry 1.3.6.1.4.1.89.76.3.1 no-access
An entry (conceptual row) in dhcpClActionTable.
               rlDhcpClActionIfIndex 1.3.6.1.4.1.89.76.3.1.1 interfaceindex read-only
The interface which the action is implemented for or NULL if it implemented for all device.
               rlDhcpClActionStatus 1.3.6.1.4.1.89.76.3.1.2 rowstatus read-only
The status of this entry. Creating the entry renewing Dhcp address on the interface; destroying the entry release Dhcp address on the interface.
               rlDhcpClActionHostName 1.3.6.1.4.1.89.76.3.1.3 snmpadminstring read-only
This option specifies the name of the client.
       rlDhcpApprovalEnabled 1.3.6.1.4.1.89.76.4 truthvalue read-only
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
       rlDhcpApprovalWaitingTable 1.3.6.1.4.1.89.76.5 no-access
IP addresses waiting for approval.
           rlDhcpApprovalWaitingEntry 1.3.6.1.4.1.89.76.5.1 no-access
An entry in rlDhcpApprovalWaitingTable.
               rlDhcpApprovalWaitingIfIndex 1.3.6.1.4.1.89.76.5.1.1 interfaceindex read-only
IP interface ifIndex.
               rlDhcpApprovalWaitingAddress 1.3.6.1.4.1.89.76.5.1.2 ipaddress read-only
IP Address waiting for approval.
               rlDhcpApprovalWaitingMask 1.3.6.1.4.1.89.76.5.1.3 ipaddress read-only
Mask waiting for approval.
               rlDhcpApprovalWaitingGateway 1.3.6.1.4.1.89.76.5.1.4 ipaddress read-only
Default gateway of received address.
       rlDhcpApprovalActionTable 1.3.6.1.4.1.89.76.6 no-access
Action for waiting ip address (approve/decline).
           rlDhcpApprovalActionEntry 1.3.6.1.4.1.89.76.6.1 no-access
An entry in rlDhcpApprovalActionTable.
               rlDhcpApprovalActionIfIndex 1.3.6.1.4.1.89.76.6.1.1 interfaceindex read-only
IP interface ifIndex.
               rlDhcpApprovalActionAddress 1.3.6.1.4.1.89.76.6.1.2 ipaddress read-only
IP Address.
               rlDhcpApprovalActionMask 1.3.6.1.4.1.89.76.6.1.3 ipaddress read-only
IP Address mask.
               rlDhcpApprovalActionApprove 1.3.6.1.4.1.89.76.6.1.4 truthvalue read-write
Approve or decline ip address.
       rlDhcpClCommandTable 1.3.6.1.4.1.89.76.7 read-only
Action MIB for DHCP Renew command.
           rlDhcpClCommandEntry 1.3.6.1.4.1.89.76.7.1 no-access
The row definition for this table.
               rlDhcpClCommandAction 1.3.6.1.4.1.89.76.7.1.2 integer read-write
Action to apply. When the field is renew_force_autoconfig the meaning is that every time when DHCP option 67 is received, the configuration is downloaded from DHCP server. The default value is false. Enumeration: 'none': 0, 'renew': 1, 'renewForceAutoconfig': 2.
       rlDhcpClConfigurationFileName 1.3.6.1.4.1.89.76.8 displaystring read-write
The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
       rlDhcpClOption67Enable 1.3.6.1.4.1.89.76.9 integer read-write
Defines whether the configuration file can be downloaded from DHCP packet option 67. Enumeration: 'enable': 1, 'disable': 2.
       rlDhcpClManualTftpServerAddress 1.3.6.1.4.1.89.76.10 ipaddress read-write
Manually configured TFTP server IP Address.
       rlDhcpClSelectedTftpServerAddress 1.3.6.1.4.1.89.76.11 ipaddress read-only
Currently selected TFTP server IP Address.
       rlDhcpClSelectedTftpServerAddressOrigin 1.3.6.1.4.1.89.76.12 integer read-only
Currently selected TFTP server IP Address's origin Enumeration: 'optionv6-59': 9, 'none': 8, 'sname': 1, 'unknown': 7, 'manual': 6, 'option150': 3, 'broadcastReply': 10, 'option66': 2, 'siaddr': 5, 'option129': 4.
       rlDhcpClManualConfigurationFileName 1.3.6.1.4.1.89.76.13 displaystring read-write
The manually configured file name.
       rlDhcpClSelectedConfigurationFileName 1.3.6.1.4.1.89.76.14 displaystring read-only
The selected configuration file name.
       rlDhcpClSelectedConfigurationFileNameOrigin 1.3.6.1.4.1.89.76.15 integer read-only
The selected configuration files name origin. Enumeration: 'option67': 2, 'defaultConfigFile': 6, 'hostname': 5, 'manual': 3, 'none': 4, 'optionv6-60': 7, 'file': 1.
       rlDhcpClEnabledByDefaultRemovedIfindex 1.3.6.1.4.1.89.76.16 integer read-write
DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration by the user on the interface and signs to application not to add DHCP client entry. Otherwise (zero value) - the meaning is that DHCP client entry must be added.
       rlDhcpClAutoUpdateEnabled 1.3.6.1.4.1.89.76.17 truthvalue read-write
Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
       rlDhcpClAutoUpdateStatus 1.3.6.1.4.1.89.76.18 integer read-only
Describes the status of current/last DHCP auto-update process. Enumeration: 'quitImageVersionNotSupported': 11, 'quitUsbSetupFileFormatError': 14, 'quitFileContentsLenZero': 6, 'quitUsbSetupFileSetIpAddrError': 16, 'startDownloadImageFile': 4, 'quitUsbSetupFileOpenError': 13, 'quitUsbSetupFileReadWriteError': 15, 'openingIndirectFile': 2, 'quitImageFileNotFound': 10, 'quitUsbSetupFileImageFileNotExist': 17, 'quitIndirectFileNotFound': 9, 'downloadedIndirectFile': 3, 'quitNoTftpOutgoingInterface': 12, 'noData': 1, 'failedToDownloadImageFile': 5, 'quitUsbSetupFileConfigFileNotExist': 18, 'quitImageFileNameLenZero': 7, 'quitVersionAlreadyUpdated': 8.
       rlDhcpClAutoConfigForce 1.3.6.1.4.1.89.76.19 truthvalue read-write
Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of the device (like a deffered action).
       rlDhcpClAutoConfigAutoSave 1.3.6.1.4.1.89.76.20 truthvalue read-write
Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
       rlDhcpClAutoConfigStatus 1.3.6.1.4.1.89.76.21 integer read-only
Describes the status of current/last DHCP auto-config process. Enumeration: 'openingIndirectFile': 3, 'openingDhcpConfigFile': 2, 'downloadingConfigFile': 8, 'finishedSuccessfully': 21, 'quitConditionsForAutoConfigChanged': 14, 'quitSelectedConfigFileNameUpdateFailed': 15, 'quitCopyRunningToStartupFailed': 19, 'quitDhcpFileNotGivenOrNotExists': 10, 'openingHostnameCfgFile': 6, 'quitSelectedConfigFileNameOriginUpdateFailed': 16, 'quitConfigFileDownloadFailed': 13, 'openingDefaultConfigFile': 7, 'searchingHostnameInIndirectFile': 4, 'quitSelectedTftpServerAddressOriginUpdateFailed': 18, 'quitNoTftpOutgoingInterface': 20, 'quitSelectedTftpServerAddressUpdateFailed': 17, 'noData': 1, 'quitFailedToFindAnyExistingConfigFile': 11, 'savingConfigInStartupCDB': 9, 'openingHostnameConfigFile': 5, 'quitConfigFileContentsLenZero': 12.
       rlDhcpClAutoConfigProtocol 1.3.6.1.4.1.89.76.22 integer read-write
Describes the auto-config process protocol. tftp - only the TFTP protocol is used by auto-configuration. scp - only the SCP protocol is used by auto-configuration. auto-(Default) Auto-configuration uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used. Enumeration: 'auto': 3, 'tftp': 1, 'scp': 2.
       rlDhcpClAutoConfigScpFileExtention 1.3.6.1.4.1.89.76.23 displaystring read-write
Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
       rlDhcpClSelectedTftpServerInetAddressType 1.3.6.1.4.1.89.76.24 inetaddresstype read-only
Currently selected TFTP server Inet Address type.
       rlDhcpClSelectedTftpServerInetAddress 1.3.6.1.4.1.89.76.25 inetaddress read-only
Currently selected TFTP server inet Address.
       rlDhcpClManualAutoConfigDataTable 1.3.6.1.4.1.89.76.26 no-access
A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
             rlDhcpClManualAutoConfigDataEntry 1.3.6.1.4.1.89.76.26.1 no-access
An entry (conceptual row) in rlDhcpClManualAutoConfigDataTable.
                 rlDhcpClManualAutoConfigDataIndex 1.3.6.1.4.1.89.76.26.1.1 integer no-access
The index of this row. There is only one entry in this table, whose index is 1.
                 rlDhcpClManualServerInetAddressType 1.3.6.1.4.1.89.76.26.1.2 inetaddresstype read-write
Manually configured inet Address type of remote server.
                 rlDhcpClManualServerInetAddress 1.3.6.1.4.1.89.76.26.1.3 inetaddress read-write
Manually configured inet Address of remote server.
                 rlDhcpClManualImageIndirectFileName 1.3.6.1.4.1.89.76.26.1.4 displaystring read-write
Manually configured indirect file name, that holds the name of the image file to download.
       rlDhcpClInformationTable 1.3.6.1.4.1.89.76.27 no-access
The (conceptual) table mentione IP address which must be released/renewed on the interface.
             rlDhcpClInformationEntry 1.3.6.1.4.1.89.76.27.1 no-access
An entry (conceptual row) in dhcpClActionTable.
                 rlDhcpClInformationIfIndex 1.3.6.1.4.1.89.76.27.1.1 interfaceindex read-only
The DHCPv4 client informational table. Contains information received by DHCP client from DHCP server
                 rlDhcpClInformationIpAddress 1.3.6.1.4.1.89.76.27.1.2 ipaddress read-only
IP Address allocated by DHCP server.
                 rlDhcpClInformationIpMask 1.3.6.1.4.1.89.76.27.1.3 ipaddress read-only
IP Address mask allocated by DHCP server.
                 rlDhcpClInformationT1 1.3.6.1.4.1.89.76.27.1.4 unsigned32 read-only
T1 timer value.
                 rlDhcpClInformationT2 1.3.6.1.4.1.89.76.27.1.5 unsigned32 read-only
T2 timer value.
                 rlDhcpClInformationDefaultGateway 1.3.6.1.4.1.89.76.27.1.6 ipaddress read-only
Default Gateway IP Address.
                 rlDhcpClInformationHostName 1.3.6.1.4.1.89.76.27.1.7 snmpadminstring read-only
Specifies the name of the client.
                 rlDhcpClInformationDomainName 1.3.6.1.4.1.89.76.27.1.8 displaystring read-only
The Domain name received by DHCP client.
                 rlDhcpClInformationTftpServerName 1.3.6.1.4.1.89.76.27.1.9 displaystring read-only
The Tftp server name received by DHCP client.
                 rlDhcpClInformationTftpFileName 1.3.6.1.4.1.89.76.27.1.10 displaystring read-only
Name of file to use in configuration process received by DHCP client.
                 rlDhcpClInformationTimeZone 1.3.6.1.4.1.89.76.27.1.11 displaystring read-only
The timezone received by DHCP client.
                 rlDhcpClInformationTftpImageName 1.3.6.1.4.1.89.76.27.1.12 displaystring read-only
Image filename to use in autoupdate process received by DHCP client.
       rlDhcpClInformationDnsServerListTable 1.3.6.1.4.1.89.76.28 no-access
The table saved the list of DNS servers received by DHCP client.
             rlDhcpClInformationDnsServerListEntry 1.3.6.1.4.1.89.76.28.1 no-access
An entry in rlDhcpClInformationDnsServerListTable.
                 rlDhcpClInformationDnsServerListIfIndex 1.3.6.1.4.1.89.76.28.1.1 interfaceindex no-access
The IfIndex in rlDhcpClInformationDnsServerListEntry.
                 rlDhcpClInformationDnsServerListPriority 1.3.6.1.4.1.89.76.28.1.2 integer no-access
The priority of the entry.
                 rlDhcpClInformationDnsServerListAddress 1.3.6.1.4.1.89.76.28.1.3 ipaddress read-only
DNS server address received by DHCP client
       rlDhcpClInformationTftpServerListTable 1.3.6.1.4.1.89.76.29 no-access
The table saved the list of Tftp servers received by DHCP client.
             rlDhcpClInformationTftpServerListEntry 1.3.6.1.4.1.89.76.29.1 no-access
An entry in rlDhcpClInformationTftpServerListTable.
                 rlDhcpClInformationTftpServerListIfIndex 1.3.6.1.4.1.89.76.29.1.1 interfaceindex no-access
The IfIndex in rlDhcpClInformationTftpServerListEntry.
                 rlDhcpClInformationTftpServerListPriority 1.3.6.1.4.1.89.76.29.1.2 integer no-access
The priority of the entry.
                 rlDhcpClInformationTftpServerListAddress 1.3.6.1.4.1.89.76.29.1.3 ipaddress read-only
Tftp server address received by DHCP client
       rlDhcpClAutoUpdateProtocol 1.3.6.1.4.1.89.76.30 integer read-write
Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used. Enumeration: 'auto': 3, 'tftp': 1, 'scp': 2.
       rlDhcpClAutoUpdateScpFileExtention 1.3.6.1.4.1.89.76.31 displaystring read-write
Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.