Dell-TIMESYNCHRONIZATION-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-TIMESYNCHRONIZATION-MIB
Download as:   
SNMPv2-CONF, IF-MIB, Dell-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlTimeSynchronization 1.3.6.1.4.1.89.92
The MIB module describes the private MIB for SNTP & TIME definitions.
       rlTimeSyncMethodMode 1.3.6.1.4.1.89.92.1
           rlTimeSyncMibVersion 1.3.6.1.4.1.89.92.1.1 integer read-only
TimeSync Mib Version.
           rndTimeSyncManagedTime 1.3.6.1.4.1.89.92.1.2 displaystring read-write
The time will be sent in the format hhmmss
           rndTimeSyncManagedDate 1.3.6.1.4.1.89.92.1.3 displaystring read-write
The date will be sent in the format ddmmyy
           rndTimeSyncManagedDateTime 1.3.6.1.4.1.89.92.1.4 displaystring read-write
The date and time will be sent in the format ddmmyyhhmmss
           rlTimeSyncMethod 1.3.6.1.4.1.89.92.1.5 rltimesyncmethod read-write
Method to be used for time synchronization in the device.
           rlTimeZone 1.3.6.1.4.1.89.92.1.6 displaystring read-write
Offset from Greenwich time (format [+/-]hh:mm).
           rlTimeZoneCode 1.3.6.1.4.1.89.92.1.7 displaystring read-write
Code definition for current TimeZone.
           rlDaylightSavingTimeMode 1.3.6.1.4.1.89.92.1.8 rldaylightsavingtimemode read-write
Daylight Saving Time - Recurring/Date/None.
           rlDaylightSavingTimeStart 1.3.6.1.4.1.89.92.1.9 octet string read-write
Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).
           rlDaylightSavingTimeEnd 1.3.6.1.4.1.89.92.1.10 octet string read-write
Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).
           rlDaylightSavingTimeOffset 1.3.6.1.4.1.89.92.1.11 integer32 read-write
Daylight Saving Time - The number of minutes to add to the clock during summer time.
           rlDaylightSavingTimeCode 1.3.6.1.4.1.89.92.1.12 displaystring read-write
Code definition for current Daylight Saving Time.
           rlTZDSTOffset 1.3.6.1.4.1.89.92.1.13 integer read-only
Local Time Zone and Daylight Saving Time offset in seconds.
           rlTimeZoneName 1.3.6.1.4.1.89.92.1.14 displaystring read-write
Human readable string describing Local Time Zone and Daylight Saving Time.
           rlTimeZoneTable 1.3.6.1.4.1.89.92.1.15 no-access
TimeZone information.
                 rlTimeZoneEntry 1.3.6.1.4.1.89.92.1.15.1 no-access
The row definition for this table.
                     rlTimeZoneIndex 1.3.6.1.4.1.89.92.1.15.1.1 integer no-access
Entry index. A row with index 2 will be existing in case the DHCP timezone is supported, and will contain Timezone and Summertime dynamic values. Using index 2 in SET operations is allowed only for SNMP inner clients (SNMPServ users), on condition that DHCP timezone option is supported.
                     rlTimeZoneTimeSyncMethod 1.3.6.1.4.1.89.92.1.15.1.2 rltimesyncmethod read-write
Method to be used for time synchronization in the device.
                     rlTimeZoneTimeZoneOffset 1.3.6.1.4.1.89.92.1.15.1.3 displaystring read-write
Offset from Greenwich time (format [+/-]hh:mm).
                     rlTimeZoneTimeZoneCode 1.3.6.1.4.1.89.92.1.15.1.4 displaystring read-write
Code definition for current TimeZone.
                     rlTimeZoneDaylightSavingTimeMode 1.3.6.1.4.1.89.92.1.15.1.5 rldaylightsavingtimemode read-write
Daylight Saving Time - Recurring/Date/None.
                     rlTimeZoneDaylightSavingTimeStart 1.3.6.1.4.1.89.92.1.15.1.6 octet string read-write
Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).
                     rlTimeZoneDaylightSavingTimeEnd 1.3.6.1.4.1.89.92.1.15.1.7 octet string read-write
Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh:mm week: 0-6 (0=First, 6=Last) wday: 1-7 (Sunday-Saturday) month: 1-12 (January-December) day: 1-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) n: 0-365 (zero-based Julian day of the year. Leap days shall be counted, and it is possible to refer to February 29). Format 2 for recurring mode is used only in the dynamic entry and should not be used in the static entry (with index 1).
                     rlTimeZoneDaylightSavingTimeOffset 1.3.6.1.4.1.89.92.1.15.1.8 integer32 read-write
Daylight Saving Time - The number of minutes to add to the clock during summer time.
                     rlTimeZoneDaylightSavingTimeCode 1.3.6.1.4.1.89.92.1.15.1.9 displaystring read-write
Code definition for current Daylight Saving Time.
                     rlTimeZoneTZDSTOffset 1.3.6.1.4.1.89.92.1.15.1.10 integer read-only
Local Time Zone and Daylight Saving Time offset in seconds.
                     rlTimeZoneTimeZoneName 1.3.6.1.4.1.89.92.1.15.1.11 displaystring read-write
Human readable string describing Local Time Zone and Daylight Saving Time.
                     rlTimeZoneDataType 1.3.6.1.4.1.89.92.1.15.1.12 integer read-only
The type of data in this entry: static or dynamic. Enumeration: 'dynamic': 2, 'static': 1.
                     rlTimeZoneDataSourceIfIndex 1.3.6.1.4.1.89.92.1.15.1.13 integer read-write
IfIndex of the interface through which the dynamic data of this row has been learned. The value of this field will be 0 if rlTimeZoneTimeDataType is static (since it is relevant only for dynamic entry), and this is the only value allowed for SET in this case.
                     rlTimeZoneDataDynamicConfSource 1.3.6.1.4.1.89.92.1.15.1.14 integer read-write
The source of dynamic data in this entry, for example: dhcpv4. Values other than 'none' are relevant only for dynamic entry. Enumeration: 'dhcpv4': 2, 'none': 1, 'dhcpv6': 3.
           rlClockStatus 1.3.6.1.4.1.89.92.1.16 integer read-only
Current status of the clock. The value 'invalid' means time is meaninglesss, since it has neither been manually configured nor achieved as a result of SNTP synchronization. Enumeration: 'manuallySet': 2, 'synchronizedBySntp': 3, 'invalid': 1.
           rlDhcpTimezoneOptionEnabled 1.3.6.1.4.1.89.92.1.17 truthvalue read-write
Specifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system. Setting this value to FALSE, will clear Timezone and Summertime dynamic configuration, so that: 1) rlTimeZoneTimeZoneCode and rlTimeZoneDaylightSavingTimeCode length will be 0 for rlTimeZoneEntry whose index = 2 (dynamic entry). 2) the operative values of Timezone and Summertime will be those statically configured. Thus, GET operations on the following MIB scalars will result is static values: rlTimeZone, rlTimeZoneCode, rlDaylightSavingTimeMode, rlDaylightSavingTimeStart, rlDaylightSavingTimeEnd, rlDaylightSavingTimeOffset, rlDaylightSavingTimeCode, rlTZDSTOffset.
           rlAutomaticClockSetFromPCEnabled 1.3.6.1.4.1.89.92.1.18 truthvalue read-write
Specifies whether automatic set of time and date is permitted from connected host PC. The feature is meant to be used in order to initialize the clock after reboot (if SNTP is not in use), since the device does not have a realtime clock.
           rlTimeAndDateHaveBeenSet 1.3.6.1.4.1.89.92.1.19 truthvalue read-only
Indicates whether the time and date have been set in the device, manually or through SNTP synchronization. If only time has been set, the value of this MIB will be FALSE. If only date has been set, the value of this MIB will be FALSE.
       rlSntpNtpClient 1.3.6.1.4.1.89.92.2
           rlSntpNtpConfig 1.3.6.1.4.1.89.92.2.1
               rlSntpNtpMibVersion 1.3.6.1.4.1.89.92.2.1.1 integer read-only
SntpNtp Mib Version.
               rlSntpNtpConfigMode 1.3.6.1.4.1.89.92.2.1.2 integer read-only
Current configuration operational mode of SNTP/NTP client. Enumeration: 'none': 1, 'anycastMulticast': 7, 'unicastAnycastMulticast': 8, 'unicast': 2, 'multicast': 4, 'anycast': 3, 'unicastMulticast': 6, 'unicastAnycast': 5.
               rlSntpNtpConfigSysStratum 1.3.6.1.4.1.89.92.2.1.3 ntpstratum read-only
The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RFC-1305 is invoked.
               rlSntpNtpConfigPollInterval 1.3.6.1.4.1.89.92.2.1.4 integer read-write
Period of time (in seconds) between succesive attempts to perform an update via SNTP.
               rlSntpNtpConfigPrimaryPollSrvAddr 1.3.6.1.4.1.89.92.2.1.5 ipaddress read-only
Ip Address of a trusted SNTP server for polling.
               rlSntpNtpConfigPrimaryPollSrvMrid 1.3.6.1.4.1.89.92.2.1.6 integer read-only
The mrid of the primary server.
               rlSntpNtpConfigPrimaryPollSrvIfIndex 1.3.6.1.4.1.89.92.2.1.7 integer read-only
The interface addressed of the primary server.
               rlSntpNtpConfigPrimaryPollSrvStratum 1.3.6.1.4.1.89.92.2.1.8 ntpstratum read-only
The stratum of the primary polling server.
               rlSntpNtpConfigSyncSrvAddr 1.3.6.1.4.1.89.92.2.1.9 ipaddress read-only
Ip Address of the synced server.
               rlSntpNtpConfigSyncSrvMrid 1.3.6.1.4.1.89.92.2.1.10 integer read-only
The mrid of the synced server.
               rlSntpNtpConfigSyncSrvIfIndex 1.3.6.1.4.1.89.92.2.1.11 integer read-only
The interface addressed of the synced server.
               rlSntpNtpConfigSyncSrvType 1.3.6.1.4.1.89.92.2.1.12 rlsntpntpsynctype read-only
Synced server type.
               rlSntpNtpConfigSyncSrvStratum 1.3.6.1.4.1.89.92.2.1.13 ntpstratum read-only
The stratum of the synced server.
               rlSntpNtpConfigRetryTimeout 1.3.6.1.4.1.89.92.2.1.14 integer32 read-only
SNTP/NTP requests Retry Interval.
               rlSntpNtpConfigRetryCnt 1.3.6.1.4.1.89.92.2.1.15 integer32 read-only
SNTP/NTP requests Retry Count.
               rlSntpNtpConfigSrvTable 1.3.6.1.4.1.89.92.2.1.16 no-access
A table containing information about config servers.
                     rlSntpNtpConfigSrvEntry 1.3.6.1.4.1.89.92.2.1.16.1 no-access
Entry in rlSntpNtpConfigSrvTable.
                         rlSntpNtpConfigSrvEntryType 1.3.6.1.4.1.89.92.2.1.16.1.1 rlsntpntpsyncentrytype no-access
Server type: Synchronize Server or Primary Poll Server.
                         rlSntpNtpConfigSrvInetAddressType 1.3.6.1.4.1.89.92.2.1.16.1.2 inetaddresstype read-only
Server inet address type.
                         rlSntpNtpConfigSrvInetAddress 1.3.6.1.4.1.89.92.2.1.16.1.3 inetaddress read-only
Server inet address.
                         rlSntpNtpConfigSrvMrid 1.3.6.1.4.1.89.92.2.1.16.1.4 integer read-only
The mrid of the server.
                         rlSntpNtpConfigSrvIfIndex 1.3.6.1.4.1.89.92.2.1.16.1.5 integer read-only
The interface addressed of the server.
                         rlSntpNtpConfigSrvSyncType 1.3.6.1.4.1.89.92.2.1.16.1.6 rlsntpntpsynctype read-only
The type of synchronization.
                         rlSntpNtpConfigSrvStratum 1.3.6.1.4.1.89.92.2.1.16.1.7 ntpstratum read-only
The stratum of the synced server.
           rlSntpConfig 1.3.6.1.4.1.89.92.2.2
               rlSntpClientMode 1.3.6.1.4.1.89.92.2.2.1 integer read-only
Current operational mode of SNTP client. Enumeration: 'active': 2, 'passive': 3, 'none': 1.
               rlSntpUnicastAdminState 1.3.6.1.4.1.89.92.2.2.2 integer read-write
SNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled. Enumeration: 'disabled': 2, 'enabled': 1.
               rlSntpBroadcastAdminState 1.3.6.1.4.1.89.92.2.2.3 integer read-write
SNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled. Enumeration: 'disabled': 2, 'enabled': 1, 'ipv4OnlyEnabled': 3, 'ipv6OnlyEnabled': 4.
               rlSntpAnycastAdminState 1.3.6.1.4.1.89.92.2.2.4 integer read-write
SNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled. Enumeration: 'disabled': 2, 'enabled': 1, 'ipv4OnlyEnabled': 3, 'ipv6OnlyEnabled': 4.
               rlSntpUnicastPollState 1.3.6.1.4.1.89.92.2.2.5 truthvalue read-write
SNTP Unicast poll state - TRUE for polled.
               rlSntpBroadcastPollState 1.3.6.1.4.1.89.92.2.2.6 truthvalue read-write
SNTP Broadcast poll state - TRUE for polled.
               rlSntpAnycastPollState 1.3.6.1.4.1.89.92.2.2.7 truthvalue read-write
SNTP Anycast poll state - TRUE for polled.
               rlSntpAuthenticationState 1.3.6.1.4.1.89.92.2.2.8 integer read-write
SNTP authentication state- Enable/Disable SNTP. Enumeration: 'disabled': 2, 'enabled': 1.
               rlTimeValidFlag 1.3.6.1.4.1.89.92.2.2.9 truthvalue read-write
Is time valid.
               rlSntpConfigBroadcastTable 1.3.6.1.4.1.89.92.2.2.10 no-access
A table containing broadcast mode information per interface.
                     rlSntpBroadcastEntry 1.3.6.1.4.1.89.92.2.2.10.1 no-access
Private paramters for interface: sntp status, broadcast mode.
                         rlSntpBroadcastIfIndex 1.3.6.1.4.1.89.92.2.2.10.1.1 integer no-access
The interface addressed by this entry.
                         rlSntpBroadcastIfAdminState 1.3.6.1.4.1.89.92.2.2.10.1.2 integer read-write
SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         rlSntpBroadcastMode 1.3.6.1.4.1.89.92.2.2.10.1.3 integer read-write
SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC. Enumeration: 'receive': 2, 'none': 1, 'receiveSend': 4, 'send': 3.
                         rlSntpBroadcastPolled 1.3.6.1.4.1.89.92.2.2.10.1.4 truthvalue read-write
TRUE if participating in polling cycle, else FALSE.
                         rlSntpBroadcastAddress 1.3.6.1.4.1.89.92.2.2.10.1.5 ipaddress read-only
Ip Address of a trusted SNTP server.
                         rlSntpBroadcastStratum 1.3.6.1.4.1.89.92.2.2.10.1.6 ntpstratum read-only
The stratum of this server.
                         rlSntpBroadcastLastResp 1.3.6.1.4.1.89.92.2.2.10.1.7 ntptimestamp read-only
SNTP Broadcast Last Response Time
                         rlSntpBroadcastStatus 1.3.6.1.4.1.89.92.2.2.10.1.8 integer read-only
The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpBroadcastOffset 1.3.6.1.4.1.89.92.2.2.10.1.9 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpBroadcastDelay 1.3.6.1.4.1.89.92.2.2.10.1.10 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpBroadcastRowStatus 1.3.6.1.4.1.89.92.2.2.10.1.11 rowstatus read-write
The Status of this SNTP broadcast interface information.
               rlSntpConfigAnycastTable 1.3.6.1.4.1.89.92.2.2.11 no-access
A table containing anycast information per interface.
                     rlSntpAnycastEntry 1.3.6.1.4.1.89.92.2.2.11.1 no-access
Private paramters for interface: server info.
                         rlSntpAnycastIfIndex 1.3.6.1.4.1.89.92.2.2.11.1.1 integer no-access
The interface addressed by this entry.
                         rlSntpAnycastAddress 1.3.6.1.4.1.89.92.2.2.11.1.2 ipaddress read-only
Ip Address of a trusted SNTP server.
                         rlSntpAnycastStratum 1.3.6.1.4.1.89.92.2.2.11.1.3 ntpstratum read-only
The stratum of this server.
                         rlSntpAnycastLastResp 1.3.6.1.4.1.89.92.2.2.11.1.4 ntptimestamp read-only
SNTP Anycast Last Response Time
                         rlSntpAnycastStatus 1.3.6.1.4.1.89.92.2.2.11.1.5 integer read-only
The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpAnycastOffset 1.3.6.1.4.1.89.92.2.2.11.1.6 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAnycastDelay 1.3.6.1.4.1.89.92.2.2.11.1.7 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAnycastRowStatus 1.3.6.1.4.1.89.92.2.2.11.1.8 rowstatus read-write
The Status of this SNTP anycast interface information.
               rlSntpConfigServerTable 1.3.6.1.4.1.89.92.2.2.12 no-access
A table containing trusted SNTP servers to be queried in unicast or broadcast mode.
                     rlSntpServerEntry 1.3.6.1.4.1.89.92.2.2.12.1 no-access
A trusted server.
                         rlSntpServerAddress 1.3.6.1.4.1.89.92.2.2.12.1.1 ipaddress no-access
Ip Address of a trusted SNTP server.
                         rlSntpServerPolled 1.3.6.1.4.1.89.92.2.2.12.1.2 truthvalue read-write
TRUE if participating in polling cycle, else FALSE.
                         rlSntpServerStratum 1.3.6.1.4.1.89.92.2.2.12.1.3 ntpstratum read-only
The stratum of this server.
                         rlSntpServerLastResp 1.3.6.1.4.1.89.92.2.2.12.1.4 ntptimestamp read-only
SNTP Server Last Response Time
                         rlSntpServerStatus 1.3.6.1.4.1.89.92.2.2.12.1.5 integer read-only
The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpServersOffset 1.3.6.1.4.1.89.92.2.2.12.1.6 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpServersDelay 1.3.6.1.4.1.89.92.2.2.12.1.7 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpServersKeyIdentifier 1.3.6.1.4.1.89.92.2.2.12.1.8 unsigned32 read-write
Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.
                         rlSntpServerRowStatus 1.3.6.1.4.1.89.92.2.2.12.1.9 rowstatus read-write
The Status of this SNTP server information.
               rlSntpConfigAuthenticationTable 1.3.6.1.4.1.89.92.2.2.13 no-access
A table authentication keys.
                     rlSntpAuthenticationEntry 1.3.6.1.4.1.89.92.2.2.13.1 no-access
Keys information for authenticationof NTP packets.
                         rlSntpAuthenticationKeyID 1.3.6.1.4.1.89.92.2.2.13.1.1 unsigned32 read-write
The key identifier. Valid rabge for key identifier is 1-4294967295.
                         rlSntpAuthenticationKeyValue 1.3.6.1.4.1.89.92.2.2.13.1.2 displaystring read-write
Key value.
                         rlSntpAuthenticationKeyState 1.3.6.1.4.1.89.92.2.2.13.1.3 integer read-write
Authentication key state - Enable/Disable key. Enumeration: 'disabled': 2, 'enabled': 1.
                         rlSntpAuthenticationRowStatus 1.3.6.1.4.1.89.92.2.2.13.1.4 rowstatus read-write
The Status of this Authentication key information.
               rlSntpPort 1.3.6.1.4.1.89.92.2.2.14 integer read-write
User defined SNTP port.
               rlSntpConfigBroadcastInetTable 1.3.6.1.4.1.89.92.2.2.15 no-access
A table containing broadcast mode information per interface.
                     rlSntpBroadcastInetEntry 1.3.6.1.4.1.89.92.2.2.15.1 no-access
Private paramters for interface: sntp status, broadcast mode.
                         rlSntpBroadcastInetIfIndex 1.3.6.1.4.1.89.92.2.2.15.1.1 integer no-access
The interface addressed by this entry.
                         rlSntpBroadcastInetIfAdminState 1.3.6.1.4.1.89.92.2.2.15.1.2 integer read-write
SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled even thought it is already enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         rlSntpBroadcastInetMode 1.3.6.1.4.1.89.92.2.2.15.1.3 integer read-write
SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (were not directed to the host). This is multicast mode in the RFC. Send - host only send SNTP packets and wait for replies directed to the host. This is anycast mode in the RFC. ReceiveSend - host receive broadcast messages (destination is broadcast address in the received messages) and send SNTP packets to wait for replies directed to the host (destination address of the reply is the host address). This mode combines anycast and multicast modes in the RFC. Enumeration: 'receive': 2, 'none': 1, 'receiveSend': 4, 'send': 3.
                         rlSntpBroadcastInetPolled 1.3.6.1.4.1.89.92.2.2.15.1.4 truthvalue read-write
TRUE if participating in polling cycle, else FALSE.
                         rlSntpBroadcastInetAddressType 1.3.6.1.4.1.89.92.2.2.15.1.5 inetaddresstype read-only
Inet Address Type of a trusted SNTP server.
                         rlSntpBroadcastInetAddress 1.3.6.1.4.1.89.92.2.2.15.1.6 inetaddress read-only
Inet Address of a trusted SNTP server.
                         rlSntpBroadcastInetStratum 1.3.6.1.4.1.89.92.2.2.15.1.7 ntpstratum read-only
The stratum of this server.
                         rlSntpBroadcastInetLastResp 1.3.6.1.4.1.89.92.2.2.15.1.8 ntptimestamp read-only
SNTP Broadcast Last Response Time
                         rlSntpBroadcastInetStatus 1.3.6.1.4.1.89.92.2.2.15.1.9 integer read-only
The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpBroadcastInetOffset 1.3.6.1.4.1.89.92.2.2.15.1.10 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpBroadcastInetDelay 1.3.6.1.4.1.89.92.2.2.15.1.11 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpBroadcastInetRowStatus 1.3.6.1.4.1.89.92.2.2.15.1.12 rowstatus read-write
The Status of this SNTP broadcast interface information.
               rlSntpConfigAnycastInetTable 1.3.6.1.4.1.89.92.2.2.16 no-access
A table containing anycast information per interface.
                     rlSntpAnycastInetEntry 1.3.6.1.4.1.89.92.2.2.16.1 no-access
Private paramters for interface: server info.
                         rlSntpAnycastInetIfIndex 1.3.6.1.4.1.89.92.2.2.16.1.1 integer no-access
The interface addressed by this entry.
                         rlSntpAnycastInetAddressType 1.3.6.1.4.1.89.92.2.2.16.1.2 inetaddresstype read-only
Inet Address Type of a trusted SNTP server.
                         rlSntpAnycastInetAddress 1.3.6.1.4.1.89.92.2.2.16.1.3 inetaddress read-only
Inet Address of a trusted SNTP server.
                         rlSntpAnycastInetStratum 1.3.6.1.4.1.89.92.2.2.16.1.4 ntpstratum read-only
The stratum of this server.
                         rlSntpAnycastInetLastResp 1.3.6.1.4.1.89.92.2.2.16.1.5 ntptimestamp read-only
SNTP Anycast Last Response Time
                         rlSntpAnycastInetStatus 1.3.6.1.4.1.89.92.2.2.16.1.6 integer read-only
The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpAnycastInetOffset 1.3.6.1.4.1.89.92.2.2.16.1.7 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAnycastInetDelay 1.3.6.1.4.1.89.92.2.2.16.1.8 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAnycastInetRowStatus 1.3.6.1.4.1.89.92.2.2.16.1.9 rowstatus read-write
The Status of this SNTP anycast interface information.
               rlSntpConfigServerInetTable 1.3.6.1.4.1.89.92.2.2.17 no-access
A table containing trusted SNTP servers to be queried in unicast or broadcast mode.
                     rlSntpServerInetEntry 1.3.6.1.4.1.89.92.2.2.17.1 no-access
A trusted server.
                         rlSntpServerInetAddressType 1.3.6.1.4.1.89.92.2.2.17.1.1 inetaddresstype no-access
Inet Address Type of a trusted SNTP server.
                         rlSntpServerInetAddress 1.3.6.1.4.1.89.92.2.2.17.1.2 inetaddress no-access
Inet Address of a trusted SNTP server.
                         rlSntpServerInetPolled 1.3.6.1.4.1.89.92.2.2.17.1.3 truthvalue read-write
TRUE if participating in polling cycle, else FALSE.
                         rlSntpServerInetStratum 1.3.6.1.4.1.89.92.2.2.17.1.4 ntpstratum read-only
The stratum of this server.
                         rlSntpServerInetLastResp 1.3.6.1.4.1.89.92.2.2.17.1.5 ntptimestamp read-only
SNTP Server Last Response Time
                         rlSntpServerInetStatus 1.3.6.1.4.1.89.92.2.2.17.1.6 integer read-only
The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpServerInetOffset 1.3.6.1.4.1.89.92.2.2.17.1.7 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpServerInetDelay 1.3.6.1.4.1.89.92.2.2.17.1.8 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpServerInetKeyIdentifier 1.3.6.1.4.1.89.92.2.2.17.1.9 unsigned32 read-write
Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.
                         rlSntpServerInetRowStatus 1.3.6.1.4.1.89.92.2.2.17.1.10 rowstatus read-write
The Status of this SNTP server information.
               rlSntpAllServerInetTable 1.3.6.1.4.1.89.92.2.2.18 no-access
A table containing all SNTP servers (for example: statically configured, dynamically configured) to be queried in unicast or broadcast mode.
                     rlSntpAllServerInetEntry 1.3.6.1.4.1.89.92.2.2.18.1 no-access
A server entry.
                         rlSntpAllServerSource 1.3.6.1.4.1.89.92.2.2.18.1.1 integer no-access
The SNTP server source: static means manually defined, dhcpv6 means learnt from DHCP. Only static entries are stored in CDB. Enumeration: 'dhcpv6': 2, 'static': 1.
                         rlSntpAllServerIfIndex 1.3.6.1.4.1.89.92.2.2.18.1.2 interfaceindex no-access
The ifIndex from which the SNTP server configuration was received (for dhcpv6 configurations). For static entries the value of this field will always be 1.
                         rlSntpAllServerPreference 1.3.6.1.4.1.89.92.2.2.18.1.3 integer no-access
The preference of SNTP server (for dhcpv6 configurations). For static entries the value of this field will always be 0.
                         rlSntpAllServerInetAddressType 1.3.6.1.4.1.89.92.2.2.18.1.4 inetaddresstype no-access
SNTP server inet address type.
                         rlSntpAllServerInetAddress 1.3.6.1.4.1.89.92.2.2.18.1.5 inetaddress no-access
SNTP server inet address.
                         rlSntpAllServerInetPolled 1.3.6.1.4.1.89.92.2.2.18.1.6 truthvalue read-only
TRUE if participating in polling cycle, else FALSE.
                         rlSntpAllServerInetStratum 1.3.6.1.4.1.89.92.2.2.18.1.7 ntpstratum read-only
The stratum of this server.
                         rlSntpAllServerInetLastResp 1.3.6.1.4.1.89.92.2.2.18.1.8 ntptimestamp read-only
SNTP Server Last Response Time
                         rlSntpAllServerInetStatus 1.3.6.1.4.1.89.92.2.2.18.1.9 integer read-only
The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server sent SNTP packets. down - server stopped sending SNTP packets. Enumeration: 'down': 4, 'unknown': 1, 'inProcess': 2, 'up': 3.
                         rlSntpAllServerInetOffset 1.3.6.1.4.1.89.92.2.2.18.1.10 ntptimestamp read-only
The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAllServerInetDelay 1.3.6.1.4.1.89.92.2.2.18.1.11 ntpsignedtimevalue read-only
The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value of this object using the algorithm described in RFC 2030.
                         rlSntpAllServerInetKeyIdentifier 1.3.6.1.4.1.89.92.2.2.18.1.12 unsigned32 read-write
Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done.
               rlSntpRestoreDefaultServers 1.3.6.1.4.1.89.92.2.2.19 truthvalue read-write
Setting this scalar to true restores sntp default unicast servers. Meaning: all manually configured servers are deleted, and the default SNTP servers are recreated with their default values. This is an 'action' scalar.
           rlNtpConfig 1.3.6.1.4.1.89.92.2.3