Dell-LLDP-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-LLDP-MIB
Download as:   
SNMPv2-CONF, LLDP-MIB, Dell-MIB, SNMPv2-SMI, Dell-DEVICEPARAMS-MIB, Q-BRIDGE-MIB, IANA-ADDRESS-FAMILY-NUMBERS-MIB, LLDP-EXT-MED-MIB, SNMPv2-TC, DIFFSERV-DSCP-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rlLldpTLVsTxOverloadingStateEnterTrap 1.3.6.1.4.1.89.0.209
Informational trap indicating that the port has entered the overloading state.
     rlLldpTLVsTxOverloadingStateExitTrap 1.3.6.1.4.1.89.0.210
Informational trap indicating that the port is no longer in the overloading state..
 rlLldp 1.3.6.1.4.1.89.110
This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol).
         rlLldpObjects 1.3.6.1.4.1.89.110.1
             rlLldpConfig 1.3.6.1.4.1.89.110.1.1
                 rlLldpEnabled 1.3.6.1.4.1.89.110.1.1.1 truthvalue read-write
Setting this variable to 'true' will globally enable the LLDP feature (both transmit and receive functionalities). Setting this variable to 'false' will globally disable the LLDP feature. Thus, the administratively desired status of a local port is determined by both this variable and the MIB lldpPortConfigAdminStatus.
                 rlLldpClearRx 1.3.6.1.4.1.89.110.1.1.2 portlist read-write
A set of ports that are identified by a PortList, in which each port is represented as a bit. Clears the Rx information about the remote agents accordingly to the specified PortList. The default value for rlLldpClearRx object is an empty binary string, which means no ports are specified to be cleared from the Rx Info. This object behaviors as an event (write-only) than reading this object always results in an Empty Port List of length zero.
                 rlLldpDuMode 1.3.6.1.4.1.89.110.1.1.3 integer read-write
Action with LLDPDU upon globally disabled LLDP. If the associated rlLldpDuMode object has a value of 'filtering(1)', then received frames are containing LLDPDU will be dropped. If the associated rlLldpDuMode object has a value of 'flooding(2)', then received frames are containing LLDPDU will flood all active ports. Enumeration: 'filtering': 1, 'flooding': 2.
                 rlLldpAutoAdvLocPortManAddrTable 1.3.6.1.4.1.89.110.1.1.4 no-access
This table contains automaticaly selected management address, advertised on the local port.
                     rlLldpAutoAdvLocPortManAddrEntry 1.3.6.1.4.1.89.110.1.1.4.1 no-access
Information about a local port, which advertises the Management address automatically. Entry also included an interface number, on which the Management address is assigned. Each management address should have distinct 'management address type' (rlLldpAutoAdvManAddrSubtype) and 'management address' (rlLldpAutoAdvManAddr).
                         rlLldpAutoAdvLocPortNum 1.3.6.1.4.1.89.110.1.1.4.1.1 lldpportnumber no-access
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the rlLldpAutoAdvLocPortManAddrTable.
                         rlLldpAutoAdvManAddrOwnerIfId 1.3.6.1.4.1.89.110.1.1.4.1.2 integer32 read-write
The integer value is used to identify the interface number (port, trunk or vlan). The management address, automatically advertised from associated 'rlLldpAutoAdvLocPortNum'local port is assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface. In case of 0 the management address is automatically calculated without care to the ifIndex it was defined on.
                         rlLldpAutoAdvManAddrNone 1.3.6.1.4.1.89.110.1.1.4.1.3 truthvalue read-write
A value of 'true' indicates that the any management address hasn't advertised by the local port. Moreover, the configuration of automatic management address advertisment is disabled. A value of 'false' indicates that the configuration of automatic management address advertisment is enabled.
                         rlLldpAutoAdvManAddrSubtype 1.3.6.1.4.1.89.110.1.1.4.1.4 addressfamilynumbers read-only
The type of management address identifier encoding used in the associated 'rlLldpAutoAdvManAddr' object.
                         rlLldpAutoAdvManAddr 1.3.6.1.4.1.89.110.1.1.4.1.5 lldpmanaddress read-only
The string value used to identify the management address is automaticaly advertised by local port, and assigned on the associated 'rlLldpAutoAdvManAddrOwnerIfId' interface.
                         rlLldpAutoAdvPortsStatus 1.3.6.1.4.1.89.110.1.1.4.1.6 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
                 rlLldpChassisIdSubtype 1.3.6.1.4.1.89.110.1.1.5 integer read-write
The type of encoding used to identify the chassis associated with the local system. Enumeration: 'macAddress': 4, 'local': 7.
             rlLldpXMedConfig 1.3.6.1.4.1.89.110.1.2
                 rlLldpXMedLocMediaPolicyContainerTable 1.3.6.1.4.1.89.110.1.2.1 no-access
This table contains one row per policy number of media policy container configuration.
                     rlLldpXMedLocMediaPolicyContainerEntry 1.3.6.1.4.1.89.110.1.2.1.1 no-access
Configuration of a particular policy in the media policy container.
                         rlLldpXMedLocMediaPolicyContainerIndex 1.3.6.1.4.1.89.110.1.2.1.1.1 policynumber no-access
The index value used to identify the Media Policy associated with this entry. The value of this object is used as a policy number index to the rlLldpXMedLocMediaPolicyContainerTable.
                         rlLldpXMedLocMediaPolicyContainerAppType 1.3.6.1.4.1.89.110.1.2.1.1.2 policycontainerapptype read-write
The media type that defines the primary function of the application for the policy advertised by an endpoint.
                         rlLldpXMedLocMediaPolicyContainerVlanID 1.3.6.1.4.1.89.110.1.2.1.1.3 integer32 read-write
An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use.
                         rlLldpXMedLocMediaPolicyContainerPriority 1.3.6.1.4.1.89.110.1.2.1.1.4 integer32 read-write
This object contains the value of the 802.1p priority which is associated with the given port on the local system.
                         rlLldpXMedLocMediaPolicyContainerDscp 1.3.6.1.4.1.89.110.1.2.1.1.5 dscp read-write
This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.
                         rlLldpXMedLocMediaPolicyContainerUnknown 1.3.6.1.4.1.89.110.1.2.1.1.6 truthvalue read-write
A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined
                         rlLldpXMedLocMediaPolicyContainerTagged 1.3.6.1.4.1.89.110.1.2.1.1.7 truthvalue read-write
A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
                         rlLldpXMedLocMediaPolicyContainerPorts 1.3.6.1.4.1.89.110.1.2.1.1.8 portlist read-write
A set of ports that are identified by a PortList, in which each port is represented as a bit. The local Media Policy Number will be associated with (or attached to) the ports specified at the rlLldpXMedLocMediaPolicyContainerPorts. The default value for rlLldpXMedLocMediaPolicyContainerPorts object is empty binary string, which means no ports are specified for advertising indicated management address instance.
                         rlLldpXMedLocMediaPolicyContainerRowStatus 1.3.6.1.4.1.89.110.1.2.1.1.9 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
             rlLldpTLVsTxOverloadingTable 1.3.6.1.4.1.89.110.1.3 no-access
A table that show the which of the LLDP TLVs are not transmitted on individual ports due to insufficient room in the frame and the size of each TLV.
                 rlLldpTLVsTxOverloadingEntry 1.3.6.1.4.1.89.110.1.3.1 no-access
LLDP TX overloading information that shows the transmission of TLVs on LLDP transmission capable ports.
                     rlLldpTxOverloadingPortNum 1.3.6.1.4.1.89.110.1.3.1.1 lldpportnumber no-access
The value of this object is used as a port index to the TLVs TX overloading Table .
                     rlLldpTxOverloadingIndex 1.3.6.1.4.1.89.110.1.3.1.2 unsigned32 no-access
The sequence number of the group into sent LLDP PPDU starting from 1.
                     rlLldpTxOverloadingGroupId 1.3.6.1.4.1.89.110.1.3.1.3 integer read-only
Defines the TLVs groups. A value of mandatory(1) defines LLDP mandatory TLVs group A value of optinal(2) defines LLDP optional TLVs group A value of medCap(3) defines LLDP MED - Capabilities group A value of medLocation(4) defines LLDP MED - Location group A value of medNetPolicy(5) defines LLDP MED - Network Policy group A value of medPoe(6) defines LLDP MED - Extended Power via MDI group A value of medInventory(7) defines LLDP MED - Inventory group A value of Xdot3(8) defines 802.3 TLVs group A value of Xdot1(9) defines 802.1 TLVs group Enumeration: 'medPoe': 6, 'medCap': 3, 'xDot1': 9, 'dcbx': 10, 'medLocation': 4, 'xDot3': 8, 'mandatory': 1, 'medInventory': 7, 'optional': 2, 'medNetPolicy': 5.
                     rlLldpTLVsTxSize 1.3.6.1.4.1.89.110.1.3.1.4 unsigned32 read-only
The size of the TLV in Bytes.
                     rlLldpTLVsTxGroupOverloading 1.3.6.1.4.1.89.110.1.3.1.5 truthvalue read-only
Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded and the value of left size is negative
                     rlLldpTLVsTxLeftSize 1.3.6.1.4.1.89.110.1.3.1.6 unsigned32 read-only
The size in Bytes of the available space left in the LLDPDU after adding the TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for the TLVs group and this is the size of the additional scpace that required for the TLVs group
             rlLldpTLVsTxOverloadingSizeTable 1.3.6.1.4.1.89.110.1.4 no-access
A table that show the total size of the all TLVs and the LLDPDU free size .
                 rlLldpTLVsTxOverloadingSizeEntry 1.3.6.1.4.1.89.110.1.4.1 no-access
LLDP TX overloading information
                     rlLldpTotalTLVsTxSize 1.3.6.1.4.1.89.110.1.4.1.2 unsigned32 read-only
The Total size of all TLVs group in Bytes.
                     rlLldpTLVsTxOverloading 1.3.6.1.4.1.89.110.1.4.1.3 truthvalue read-only
Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded and the value of left size is negative
                     rlLldpLeftTLVsTxSize 1.3.6.1.4.1.89.110.1.4.1.4 unsigned32 read-only
The size in Bytes of the available space left in the LLDPDU after adding all TLVs group. In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for all the TLVs group and this is the size of the additional scpace that required for all the TLVs group
             rlLldpTLVsTxOverloadingPorts 1.3.6.1.4.1.89.110.1.5 portlist read-only
Port list that represent the overloading state of each port
             rlLldpXMedNetPolVoiceUpdateMode 1.3.6.1.4.1.89.110.1.7 policyappvoiceupdatemode read-write
             rlLldpRemTtlTable 1.3.6.1.4.1.89.110.1.8 no-access
This table contains the remote device Time To Live LLDP TLV.
                 rlLldpRemTtlEntry 1.3.6.1.4.1.89.110.1.8.1 no-access
LLDP Time To TTL remove TLV. This uses the key as defind in lldpRemTable of the LLDP-MIB.
                     rlLldpRemTtl 1.3.6.1.4.1.89.110.1.8.1.1 unsigned32 read-only
This object contains the remote device Time To Live LLDP TLV.