DVB-RCS-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: DVB-RCS-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, URI-TC-MIB, INET-ADDRESS-MIB, SNMPv2-TC, DIFFSERV-DSCP-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dvbRcsMib 1.3.6.1.2.1.10.239
DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
         dvbRcsMibObjects 1.3.6.1.2.1.10.239.1
             dvbRcsRcst 1.3.6.1.2.1.10.239.1.1
                 dvbRcsRcstSystem 1.3.6.1.2.1.10.239.1.1.1
                     dvbRcsSystemMibRevision 1.3.6.1.2.1.10.239.1.1.1.1 snmpadminstring read-only
This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported.
                     dvbRcsSystemSatLabsProfilesDeclaration 1.3.6.1.2.1.10.239.1.1.1.2 dvbrcssatlabsprofilemap read-only
Indicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations.
                     dvbRcsSystemSatLabsOptionsDeclaration 1.3.6.1.2.1.10.239.1.1.1.3 dvbrcssatlabsoptionmap read-only
Indicates the SatLabs options supported, as defined in the SatLabs System Recommendations.
                     dvbRcsSystemSatLabsFeaturesDeclaration 1.3.6.1.2.1.10.239.1.1.1.4 dvbrcssatlabsfeaturemap read-only
Indicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations.
                     dvbRcsSystemLocation 1.3.6.1.2.1.10.239.1.1.1.5 snmpadminstring read-write
Physical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: ,,,,,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit.
                     dvbRcsSystemOduAntennaSize 1.3.6.1.2.1.10.239.1.1.1.6 unsigned32 read-write
Diameter of the antenna.
                     dvbRcsSystemOduAntennaGain 1.3.6.1.2.1.10.239.1.1.1.7 unsigned32 read-write
Antenna peak gain of the ODU.
                     dvbRcsSystemOduSspa 1.3.6.1.2.1.10.239.1.1.1.8 unsigned32 read-write
Power level of the Solid State Power Amplifier installed in the ODU.
                     dvbRcsSystemOduTxType 1.3.6.1.2.1.10.239.1.1.1.9 snmpadminstring read-write
Type of transmitter installed in the ODU.
                     dvbRcsSystemOduRxType 1.3.6.1.2.1.10.239.1.1.1.10 snmpadminstring read-write
Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc.
                     dvbRcsSystemOduRxBand 1.3.6.1.2.1.10.239.1.1.1.11 integer read-write
LNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Band Enumeration: 'oduHighRxBand': 0, 'oduLowRxBand': 1.
                     dvbRcsSystemOduRxLO 1.3.6.1.2.1.10.239.1.1.1.12 unsigned32 read-write
Frequency of LNB Local Oscillator (in 100 Hz)
                     dvbRcsSystemOduTxLO 1.3.6.1.2.1.10.239.1.1.1.13 unsigned32 read-write
Frequency of Block Up-Converter Local Oscillator (in 100 Hz).
                     dvbRcsSystemIduPep 1.3.6.1.2.1.10.239.1.1.1.14
                           dvbRcsTcpPep 1.3.6.1.2.1.10.239.1.1.1.14.1 integer read-write
Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled Enumeration: 'disabled': 0, 'enabled': 1.
                           dvbRcsHttpPep 1.3.6.1.2.1.10.239.1.1.1.14.2 integer read-write
Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled Enumeration: 'disabled': 0, 'enabled': 1.
                     dvbRcsOduTx 1.3.6.1.2.1.10.239.1.1.1.15
                           dvbRcsOduTxTypeTable 1.3.6.1.2.1.10.239.1.1.1.15.1 no-access
This table contains the identification of each well- known BUC type supported by the IDU and provides its associated index.
                               dvbRcsOduTxTypeEntry 1.3.6.1.2.1.10.239.1.1.1.15.1.1 no-access
An entry in the BUC type table.
                                   dvbRcsOduTxTypeIndex 1.3.6.1.2.1.10.239.1.1.1.15.1.1.1 unsigned32 no-access
Index for the BUC type.
                                   dvbRcsOduTxTypeDescription 1.3.6.1.2.1.10.239.1.1.1.15.1.1.2 snmpadminstring read-only
Text-based identification of a BUC type.
                           dvbRcsOduTxType 1.3.6.1.2.1.10.239.1.1.1.15.2 unsigned32 read-write
Index of the selected BUC type.
                     dvbRcsOduRx 1.3.6.1.2.1.10.239.1.1.1.16
                           dvbRcsOduRxTypeTable 1.3.6.1.2.1.10.239.1.1.1.16.1 no-access
This table contains the identification of each well- known LNB type supported by the IDU and provides its associated index.
                               dvbRcsOduRxTypeEntry 1.3.6.1.2.1.10.239.1.1.1.16.1.1 no-access
An entry in the LNB type table.
                                   dvbRcsOduRxTypeIndex 1.3.6.1.2.1.10.239.1.1.1.16.1.1.1 unsigned32 no-access
Index for the LNB type.
                                   dvbRcsOduRxTypeDescription 1.3.6.1.2.1.10.239.1.1.1.16.1.1.2 snmpadminstring read-only
Text-based identification of an LNB type.
                           dvbRcsOduRxType 1.3.6.1.2.1.10.239.1.1.1.16.2 unsigned32 read-write
Index of the selected LNB type.
                     dvbRcsOduAntenna 1.3.6.1.2.1.10.239.1.1.1.17
                           dvbRcsOduAntennaTypeTable 1.3.6.1.2.1.10.239.1.1.1.17.1 no-access
This table contains the identification of each well- known antenna type supported by the IDU and provides its associated index.
                               dvbRcsOduAntennaTypeEntry 1.3.6.1.2.1.10.239.1.1.1.17.1.1 no-access
An entry in the antenna type table.
                                   dvbRcsOduAntennaTypeIndex 1.3.6.1.2.1.10.239.1.1.1.17.1.1.1 unsigned32 no-access
Index for the antenna type.
                                   dvbRcsOduAntennaTypeDescription 1.3.6.1.2.1.10.239.1.1.1.17.1.1.2 snmpadminstring read-only
Text-based identification of an antenna type.
                           dvbRcsOduAntennaType 1.3.6.1.2.1.10.239.1.1.1.17.2 unsigned32 read-write
Index of the selected antenna type.
                 dvbRcsRcstNetwork 1.3.6.1.2.1.10.239.1.1.2
                     dvbRcsNetworkOamInetAddressType 1.3.6.1.2.1.10.239.1.1.2.1 inetaddresstype read-write
The type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is unknown(0).
                     dvbRcsNetworkOamInetAddress 1.3.6.1.2.1.10.239.1.1.2.2 inetaddress read-write
OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address. If the terminal has no OAM Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkOamInetAddressType object.
                     dvbRcsNetworkOamInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.3 inetaddressprefixlength read-write
Prefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero.
                     dvbRcsNetworkOamInetAddressAssign 1.3.6.1.2.1.10.239.1.1.2.4 integer read-write
Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned. Enumeration: 'oamInetAddressDynamic': 2, 'oamInetAddressStatic': 1.
                     dvbRcsNetworkLanInetAddressType 1.3.6.1.2.1.10.239.1.1.2.5 inetaddresstype read-write
The type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of this object is unknown(0).
                     dvbRcsNetworkLanInetAddress 1.3.6.1.2.1.10.239.1.1.2.6 inetaddress read-write
IP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkLanInetAddressType object.
                     dvbRcsNetworkLanInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.7 inetaddressprefixlength read-write
Prefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero.
                     dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType 1.3.6.1.2.1.10.239.1.1.2.8 inetaddresstype read-write
The type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the value of this object is unknown(0).
                     dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress 1.3.6.1.2.1.10.239.1.1.2.9 inetaddress read-write
IP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType object.
                     dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.10 inetaddressprefixlength read-write
Prefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero.
                     dvbRcsNetworkDnsServers 1.3.6.1.2.1.10.239.1.1.2.11
                           dvbRcsPrimaryDnsServerInetAddressType 1.3.6.1.2.1.10.239.1.1.2.11.1 inetaddresstype read-write
The type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
                           dvbRcsPrimaryDnsServerInetAddress 1.3.6.1.2.1.10.239.1.1.2.11.2 inetaddress read-write
IP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPrimaryDnsServerInetAddressType object.
                           dvbRcsPrimaryDnsServerInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.11.3 inetaddressprefixlength read-write
Prefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
                           dvbRcsSecondaryDnsServerInetAddressType 1.3.6.1.2.1.10.239.1.1.2.11.4 inetaddresstype read-write
The type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).
                           dvbRcsSecondaryDnsServerInetAddress 1.3.6.1.2.1.10.239.1.1.2.11.5 inetaddress read-write
IP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsSecondaryDnsServerInetAddressType object.
                           dvbRcsSecondaryDnsServerInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.11.6 inetaddressprefixlength read-write
Prefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
                     dvbRcsNetworkNccMgtInetAddressType 1.3.6.1.2.1.10.239.1.1.2.12 inetaddresstype read-write
The type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this object is unknown(0).
                     dvbRcsNetworkNccMgtInetAddress 1.3.6.1.2.1.10.239.1.1.2.13 inetaddress read-write
IP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkNccMgtInetAddressType object.
                     dvbRcsNetworkNccMgtInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.2.14 inetaddressprefixlength read-write
Prefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero.
                     dvbRcsNetworkConfigFileDownloadUrl 1.3.6.1.2.1.10.239.1.1.2.15 uri read-write
Full path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
                     dvbRcsNetworkInstallLogFileDownloadUrl 1.3.6.1.2.1.10.239.1.1.2.16 uri read-write
Full path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 3986.
                     dvbRcsNetworkConfigFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.17 uri read-write
Full path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
                     dvbRcsNetworkLogFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.18 uri read-write
Full path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.
                     dvbRcsNetworkInstallLogFileUploadUrl 1.3.6.1.2.1.10.239.1.1.2.19 uri read-write
Full path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 3986.
                 dvbRcsRcstInstall 1.3.6.1.2.1.10.239.1.1.3
                     dvbRcsInstallAntennaAlignmentState 1.3.6.1.2.1.10.239.1.1.3.1 integer read-write
Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail Enumeration: 'antennaAlignmentStart': 1, 'antennaAlignmentContinue': 3, 'antennaAlignmentStop': 4, 'antennaAlignmentSuccess': 5, 'antennaAlignmentFail': 6, 'antennaAlignmentDeny': 2.
                     dvbRcsInstallCwFrequency 1.3.6.1.2.1.10.239.1.1.3.2 unsigned32 read-write
Frequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz.
                     dvbRcsInstallCwMaxDuration 1.3.6.1.2.1.10.239.1.1.3.3 unsigned32 read-write
Time after which the Continuous Wave carrier must be put down (in seconds).
                     dvbRcsInstallCwPower 1.3.6.1.2.1.10.239.1.1.3.4 integer32 read-write
IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW.
                     dvbRcsInstallCoPolReading 1.3.6.1.2.1.10.239.1.1.3.5 unsigned32 read-write
Co-polarization measured value during installation procedure (in 0.1 dB).
                     dvbRcsInstallXPolReading 1.3.6.1.2.1.10.239.1.1.3.6 unsigned32 read-write
Cross-polarization measured value during installation procedure (in 0.1 dB).
                     dvbRcsInstallCoPolTarget 1.3.6.1.2.1.10.239.1.1.3.7 unsigned32 read-write
Co-polarization target value during installation procedure (in 0.1 dB).
                     dvbRcsInstallXPolTarget 1.3.6.1.2.1.10.239.1.1.3.8 unsigned32 read-write
Cross-polarization target value during installation procedure (in 0.1 dB).
                     dvbRcsInstallStandByDuration 1.3.6.1.2.1.10.239.1.1.3.9 unsigned32 read-write
Time to wait in stand-by mode (in seconds).
                     dvbRcsInstallTargetEsN0 1.3.6.1.2.1.10.239.1.1.3.10 unsigned32 read-write
This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dB to 31.5 dB, with a precision of 0.1 dB.
                 dvbRcsRcstQos 1.3.6.1.2.1.10.239.1.1.4
                     dvbRcsPktClassTable 1.3.6.1.2.1.10.239.1.1.4.1 no-access
This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex.
                         dvbRcsPktClassEntry 1.3.6.1.2.1.10.239.1.1.4.1.1 no-access
An entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types are then assumed to be set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet.
                             dvbRcsPktClassIndex 1.3.6.1.2.1.10.239.1.1.4.1.1.1 unsigned32 no-access
Index automatically incremented by one at row creation.
                             dvbRcsPktClassDscpLow 1.3.6.1.2.1.10.239.1.1.4.1.1.2 dscp read-only
This object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
                             dvbRcsPktClassDscpHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.3 dscp read-only
This object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.
                             dvbRcsPktClassDscpMarkValue 1.3.6.1.2.1.10.239.1.1.4.1.1.4 dscporany read-only
This object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63)
                             dvbRcsPktClassIpProtocol 1.3.6.1.2.1.10.239.1.1.4.1.1.5 unsigned32 read-only
This object specifies the IP protocol to which a packet is compared. A value of 255 means match all.
                             dvbRcsPktClassSrcInetAddressType 1.3.6.1.2.1.10.239.1.1.4.1.1.6 inetaddresstype read-only
The type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this object is unknown(0).
                             dvbRcsPktClassSrcInetAddress 1.3.6.1.2.1.10.239.1.1.4.1.1.7 inetaddress read-only
This object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassSrcInetAddressType object.
                             dvbRcsPktClassSrcInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.4.1.1.8 inetaddressprefixlength read-only
Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
                             dvbRcsPktClassDstInetAddressType 1.3.6.1.2.1.10.239.1.1.4.1.1.9 inetaddresstype read-only
The type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this object is unknown(0).
                             dvbRcsPktClassDstInetAddress 1.3.6.1.2.1.10.239.1.1.4.1.1.10 inetaddress read-only
This object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassDstInetAddressType object.
                             dvbRcsPktClassDstInetAddressPrefixLength 1.3.6.1.2.1.10.239.1.1.4.1.1.11 inetaddressprefixlength read-only
Prefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.
                             dvbRcsPktClassSrcPortLow 1.3.6.1.2.1.10.239.1.1.4.1.1.12 inetportnumber read-only
This object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
                             dvbRcsPktClassSrcPortHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.13 inetportnumber read-only
This object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
                             dvbRcsPktClassDstPortLow 1.3.6.1.2.1.10.239.1.1.4.1.1.14 inetportnumber read-only
This object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
                             dvbRcsPktClassDstPortHigh 1.3.6.1.2.1.10.239.1.1.4.1.1.15 inetportnumber read-only
This object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.
                             dvbRcsPktClassVlanUserPri 1.3.6.1.2.1.10.239.1.1.4.1.1.16 integer32 read-only
This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive.
                             dvbRcsPktClassPhbAssociation 1.3.6.1.2.1.10.239.1.1.4.1.1.17 unsigned32 read-only
Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier).
                             dvbRcsPktClassRowStatus 1.3.6.1.2.1.10.239.1.1.4.1.1.18 rowstatus read-only
The status of this conceptual row. All writable objects in this row may be modified at any time.
                     dvbRcsPhbMappingTable 1.3.6.1.2.1.10.239.1.1.4.2 no-access
This table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class.
                         dvbRcsPhbMappingEntry 1.3.6.1.2.1.10.239.1.1.4.2.1 no-access
An entry in the PHB mapping table.
                             dvbRcsPhbIdentifier 1.3.6.1.2.1.10.239.1.1.4.2.1.1 unsigned32 no-access
Identification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB.
                             dvbRcsPhbName 1.3.6.1.2.1.10.239.1.1.4.2.1.2 snmpadminstring read-only
The name of the Per-Hop Behavior (PHB).
                             dvbRcsPhbRequestClassAssociation 1.3.6.1.2.1.10.239.1.1.4.2.1.3 unsigned32 read-only
This object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index).
                             dvbRcsPhbMappingRowStatus 1.3.6.1.2.1.10.239.1.1.4.2.1.4 rowstatus read-only
The status of this conceptual row. All writable objects in this row may be modified at any time.
                     dvbRcsRequestClassTable 1.3.6.1.2.1.10.239.1.1.4.3 no-access
This table is a list of Request Class entries. This class describes the layer 2 QoS objects.
                         dvbRcsRequestClassEntry 1.3.6.1.2.1.10.239.1.1.4.3.1 no-access
An entry in the Request Class table.
                             dvbRcsRequestClassIndex 1.3.6.1.2.1.10.239.1.1.4.3.1.1 unsigned32 no-access
Index of the Request Class table. A total of 16 entries are supported.
                             dvbRcsRequestClassName 1.3.6.1.2.1.10.239.1.1.4.3.1.2 snmpadminstring read-only
Name of the Request Class.
                             dvbRcsRequestClassChanId 1.3.6.1.2.1.10.239.1.1.4.3.1.3 unsigned32 read-only
Channel ID of the Request Class.
                             dvbRcsRequestClassVccVpi 1.3.6.1.2.1.10.239.1.1.4.3.1.4 unsigned32 read-only
Defines the VPI used for the Request Class (ATM profile).
                             dvbRcsRequestClassVccVci 1.3.6.1.2.1.10.239.1.1.4.3.1.5 unsigned32 read-only
Defines the VCI used for the Request Class (ATM profile).
                             dvbRcsRequestClassPidPoolReference 1.3.6.1.2.1.10.239.1.1.4.3.1.6 unsigned32 read-only
Reference to the Packet IDentifier (PID) pool applicable for the Request Class.
                             dvbRcsRequestClassCra 1.3.6.1.2.1.10.239.1.1.4.3.1.7 unsigned32 read-only
Defines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s).
                             dvbRcsRequestClassRbdcMax 1.3.6.1.2.1.10.239.1.1.4.3.1.8 unsigned32 read-only
Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s.
                             dvbRcsRequestClassRbdcTimeout 1.3.6.1.2.1.10.239.1.1.4.3.1.9 unsigned32 read-only
Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes.
                             dvbRcsRequestClassVbdcMax 1.3.6.1.2.1.10.239.1.1.4.3.1.10 unsigned32 read-only
Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe.
                             dvbRcsRequestClassVbdcTimeout 1.3.6.1.2.1.10.239.1.1.4.3.1.11 unsigned32 read-only
Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes.
                             dvbRcsRequestClassVbdcMaxBackLog 1.3.6.1.2.1.10.239.1.1.4.3.1.12 unsigned32 read-only
Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes).
                             dvbRcsRequestClassRowStatus 1.3.6.1.2.1.10.239.1.1.4.3.1.13 rowstatus read-only
The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
                     dvbRcsPidPoolTable 1.3.6.1.2.1.10.239.1.1.4.4 no-access
This table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
                         dvbRcsPidPoolEntry 1.3.6.1.2.1.10.239.1.1.4.4.1 no-access
An entry in the PID pool table.
                             dvbRcsPidPoolIndex 1.3.6.1.2.1.10.239.1.1.4.4.1.1 unsigned32 no-access
Index of the PID pool in the PID pool table.
                             dvbRcsPidIndex 1.3.6.1.2.1.10.239.1.1.4.4.1.2 unsigned32 no-access
Index of the PID entry within the PID pool.
                             dvbRcsPidValue 1.3.6.1.2.1.10.239.1.1.4.4.1.3 unsigned32 read-only
Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
                             dvbRcsPidPoolRowStatus 1.3.6.1.2.1.10.239.1.1.4.4.1.4 rowstatus read-only
The status of this conceptual row. All writable objects in this row may be modified at any time.
                     dvbRcsQosGlobalRbdcMax 1.3.6.1.2.1.10.239.1.1.4.5 unsigned32 read-write
Global maximum RBDC that can be requested for the RCST, in number of 2 kbit/s.
                     dvbRcsQosGlobalVbdcMax 1.3.6.1.2.1.10.239.1.1.4.6 unsigned32 read-write
Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe.
                     dvbRcsQosGlobalVbdcMaxBackLog 1.3.6.1.2.1.10.239.1.1.4.7 unsigned32 read-write
Global VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes).
                     dvbRcsQosChannelIdStrictDispatching 1.3.6.1.2.1.10.239.1.1.4.8 integer read-write
Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association Enumeration: 'notStrict': 0, 'strict': 1.
                 dvbRcsRcstControl 1.3.6.1.2.1.10.239.1.1.5
                     dvbRcsCtrlRebootCommand 1.3.6.1.2.1.10.239.1.1.5.1 integer read-write
This variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load before reboot) Enumeration: 'idle': 1, 'alternate': 3, 'normal': 2.
                     dvbRcsCtrlRcstTxDisable 1.3.6.1.2.1.10.239.1.1.5.2 integer read-write
This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled Enumeration: 'idle': 1, 'disable': 2.
                     dvbRcsCtrlUserTrafficDisable 1.3.6.1.2.1.10.239.1.1.5.3 integer read-write
This variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user traffic Enumeration: 'idle': 1, 'disable': 2.
                     dvbRcsCtrlCwEnable 1.3.6.1.2.1.10.239.1.1.5.4 integer read-write
This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- on Enumeration: 'on': 2, 'off': 1.
                     dvbRcsCtrlOduTxReferenceEnable 1.3.6.1.2.1.10.239.1.1.5.5 integer read-write
Enables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) on Enumeration: 'on': 2, 'off': 1.
                     dvbRcsCtrlOduTxDCEnable 1.3.6.1.2.1.10.239.1.1.5.6 integer read-write
Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on Enumeration: 'on': 2, 'off': 1.
                     dvbRcsCtrlOduRxDCEnable 1.3.6.1.2.1.10.239.1.1.5.7 integer read-write
Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on Enumeration: 'on': 2, 'off': 1.
                     dvbRcsCtrlDownloadFileCommand 1.3.6.1.2.1.10.239.1.1.5.8 integer read-write
This variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG feature) Enumeration: 'installationLog': 3, 'idle': 1, 'config': 2.
                     dvbRcsCtrlUploadFileCommand 1.3.6.1.2.1.10.239.1.1.5.9 integer read-write
This variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG feature) Enumeration: 'installationLog': 4, 'idle': 1, 'config': 2, 'eventAlarm': 3.
                     dvbRcsCtrlActivateConfigFileCommand 1.3.6.1.2.1.10.239.1.1.5.10 integer read-write
Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) idle (2) activate Enumeration: 'idle': 1, 'activate': 2.
                     dvbRcsCtrlRcstLogonCommand 1.3.6.1.2.1.10.239.1.1.5.11 integer read-write
This variable will initiate an RCST logon: (1) idle (2) initiate RCST logon Enumeration: 'idle': 1, 'logon': 2.
                     dvbRcsCtrlRcstLogoffCommand 1.3.6.1.2.1.10.239.1.1.5.12 integer read-write
This variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoff Enumeration: 'idle': 1, 'logoff': 2.
                     dvbRcsCtrlRcstRxReacquire 1.3.6.1.2.1.10.239.1.1.5.13 integer read-write
This variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward link Enumeration: 'reacquireForwardLink': 2, 'idle': 1.
                 dvbRcsRcstState 1.3.6.1.2.1.10.239.1.1.6
                     dvbRcsRcstMode 1.3.6.1.2.1.10.239.1.1.6.1 integer read-write
Identifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Operational (1) Enumeration: 'installation': 0, 'operational': 1.
                     dvbRcsRcstFaultStatus 1.3.6.1.2.1.10.239.1.1.6.2 integer read-only
Provides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1) Enumeration: 'fault': 1, 'nofault': 0.
                     dvbRcsRcstFwdLinkStatus 1.3.6.1.2.1.10.239.1.1.6.3 integer read-only
Provides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1) Enumeration: 'notAcquired': 0, 'acquired': 1.
                     dvbRcsRcstRtnLinkStatus 1.3.6.1.2.1.10.239.1.1.6.4 integer read-only
Provides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1) Enumeration: 'loggedOff': 0, 'loggedOn': 1.
                     dvbRcsRcstLogUpdated 1.3.6.1.2.1.10.239.1.1.6.5 integer read-only
Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication as the log file is fetched by the NCC. Enumeration: 'noUpdate': 0, 'logfileUpdated': 1.
                     dvbRcsRcstCurrentSoftwareVersion 1.3.6.1.2.1.10.239.1.1.6.6 snmpadminstring read-only
Current RCST software version.
                     dvbRcsRcstAlternateSoftwareVersion 1.3.6.1.2.1.10.239.1.1.6.7 snmpadminstring read-only
Alternate (backup/new) RCST software version.
                     dvbRcsRcstActivatedConfigFileVersion 1.3.6.1.2.1.10.239.1.1.6.8 snmpadminstring read-only
Version of the most recently activated configuration file. The version is vendor specific.
                     dvbRcsRcstDownloadedConfigFileVersion 1.3.6.1.2.1.10.239.1.1.6.9 snmpadminstring read-only
Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation.
             dvbRcsFwdLink 1.3.6.1.2.1.10.239.1.2
                 dvbRcsFwdConfig 1.3.6.1.2.1.10.239.1.2.1
                     dvbRcsFwdStartTable 1.3.6.1.2.1.10.239.1.2.1.1 no-access
Lists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC.
                         dvbRcsFwdStartEntry 1.3.6.1.2.1.10.239.1.2.1.1.1 no-access
An entry in the Forward Link Start Configuration table.
                             dvbRcsFwdStartIndex 1.3.6.1.2.1.10.239.1.2.1.1.1.1 unsigned32 no-access
Index of the Forward Link StartConfig table.
                             dvbRcsFwdStartPopId 1.3.6.1.2.1.10.239.1.2.1.1.1.2 integer32 read-only
Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption.
                             dvbRcsFwdStartFrequency 1.3.6.1.2.1.10.239.1.2.1.1.1.3 unsigned32 read-only
Frequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 kHz.
                             dvbRcsFwdStartPolar 1.3.6.1.2.1.10.239.1.2.1.1.1.4 integer read-only
2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right Enumeration: 'circularRight': 3, 'linearVertical': 1, 'circularLeft': 2, 'linearHorizontal': 0.
                             dvbRcsFwdStartFormat 1.3.6.1.2.1.10.239.1.2.1.1.1.5 integer read-only
Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting the forward link. The support of automatic format selection is optional. One or several of the other format selections must be supported, according to the claimed SatLabs profile support. Enumeration: 'dvbs2acm': 2, 'auto': -1, 'dvbs': 0, 'dvbs2ccm': 1.
                             dvbRcsFwdStartRolloff 1.3.6.1.2.1.10.239.1.2.1.1.1.6 integer read-only
Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35 Enumeration: 'rolloff020': 1, 'autoRolloff': 0, 'rolloff035': 3, 'rolloff025': 2.
                             dvbRcsFwdStartSymbolRate 1.3.6.1.2.1.10.239.1.2.1.1.1.7 unsigned32 read-only
Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 symbols/s.
                             dvbRcsFwdStartInnerFec 1.3.6.1.2.1.10.239.1.2.1.1.1.8 integer read-only
Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The support of autoFec is optional. Enumeration: 'fecRate56': 3, 'fecRate45': 7, 'fecRate34': 2, 'fecRate35': 6, 'fecRate12': 0, 'fecRate13': 10, 'fecRate25': 9, 'fecRate23': 1, 'fecRate14': 11, 'fecRate78': 4, 'autoFec': -1, 'fecRate89': 5, 'fecRate910': 8, 'noInnerCode': 12.
                             dvbRcsFwdStartRowStatus 1.3.6.1.2.1.10.239.1.2.1.1.1.9 rowstatus read-only
The status of this conceptual row. It is not possible to change values in a row of this table while the row is active.
                 dvbRcsFwdStatus 1.3.6.1.2.1.10.239.1.2.2
                     dvbRcsFwdStatusPopId 1.3.6.1.2.1.10.239.1.2.2.1 unsigned32 read-only
Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon.
                     dvbRcsFwdStatusTable 1.3.6.1.2.1.10.239.1.2.2.2 no-access
This table describes the current status of Forward Link interfaces.
                         dvbRcsFwdStatusEntry 1.3.6.1.2.1.10.239.1.2.2.2.1 no-access
An entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry.
                             dvbRcsFwdStatusIndex 1.3.6.1.2.1.10.239.1.2.2.2.1.1 unsigned32 no-access
Index of the forward link status table.
                             dvbRcsFwdStatusIfReference 1.3.6.1.2.1.10.239.1.2.2.2.1.2 unsigned32 read-only
Cross reference to the interface table.
                             dvbRcsFwdStatusNetId 1.3.6.1.2.1.10.239.1.2.2.2.1.3 unsigned32 read-only
Interactive network identifier of the forward link (from the RCS Map Table).
                             dvbRcsFwdStatusNetName 1.3.6.1.2.1.10.239.1.2.2.2.1.4 snmpadminstring read-only
The name of the interactive network of the forward link (from the RCS Map Table).
                             dvbRcsFwdStatusFormat 1.3.6.1.2.1.10.239.1.2.2.2.1.5 integer read-only
Specifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reserved Enumeration: 'dvbs2acm': 2, 'reservedFormat': 3, 'dvbs': 0, 'dvbs2ccm': 1.
                             dvbRcsFwdStatusFrequency 1.3.6.1.2.1.10.239.1.2.2.2.1.6 unsigned32 read-only
An estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz.
                             dvbRcsFwdStatusPolar 1.3.6.1.2.1.10.239.1.2.2.2.1.7 integer read-only
2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right Enumeration: 'circularRight': 3, 'linearVertical': 1, 'circularLeft': 2, 'linearHorizontal': 0.
                             dvbRcsFwdStatusInnerFec 1.3.6.1.2.1.10.239.1.2.2.2.1.8 integer read-only
Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. Enumeration: 'fecRate56': 3, 'fecRate45': 7, 'fecRate34': 2, 'fecRate35': 6, 'fecRate12': 0, 'unknown': -1, 'fecRate25': 9, 'fecRate23': 1, 'fecRate14': 11, 'fecRate78': 4, 'fecRate13': 10, 'fecRate89': 5, 'fecRate910': 8, 'noInnerCode': 12.
                             dvbRcsFwdStatusSymbolRate 1.3.6.1.2.1.10.239.1.2.2.2.1.9 unsigned32 read-only
An estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s.
                             dvbRcsFwdStatusRolloff 1.3.6.1.2.1.10.239.1.2.2.2.1.10 integer read-only
An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35 Enumeration: 'rolloff025': 2, 'undefRolloff': 0, 'rolloff020': 1, 'rolloff035': 3.
                             dvbRcsFwdStatusModulation 1.3.6.1.2.1.10.239.1.2.2.2.1.11 integer read-only
Indicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. Enumeration: 'mQPSK': 2, 'mBPSK': 1, 'unknown': 0, 'm32APSK': 5, 'm8PSK': 3, 'm16APSK': 4.
                             dvbRcsFwdStatusFecFrame 1.3.6.1.2.1.10.239.1.2.2.2.1.12 integer read-only
Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. Enumeration: 'unknown': 0, 'shortframe': 1, 'longframe': 2.
                             dvbRcsFwdStatusPilot 1.3.6.1.2.1.10.239.1.2.2.2.1.13 integer read-only
Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'. Enumeration: 'unknown': 0, 'pilotNotused': 1, 'pilotUsed': 2.
                             dvbRcsFwdStatusBer 1.3.6.1.2.1.10.239.1.2.2.2.1.14 integer32 read-only
Provides the RCST BER on the Forward Link in log10 units.
                             dvbRcsFwdStatusCnr 1.3.6.1.2.1.10.239.1.2.2.2.1.15 integer32 read-only
Provides the RCST CNR on the Forward Link in 0.1 dB units.
                             dvbRcsFwdStatusRxPower 1.3.6.1.2.1.10.239.1.2.2.2.1.16 integer32 read-only
Provides the power level of the forward link as received at the IDU, in 0.1 dBm units.
             dvbRcsRtnLink 1.3.6.1.2.1.10.239.1.3
                 dvbRcsRtnConfig 1.3.6.1.2.1.10.239.1.3.1
                     dvbRcsRtnConfigMaxEirp 1.3.6.1.2.1.10.239.1.3.1.1 integer32 read-write
Max Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX output level, e.g., when using a BUC that has a power level detector and that provides sufficient feedback to the IDU.
                     dvbRcsRtnConfigDefIfLevel 1.3.6.1.2.1.10.239.1.3.1.2 integer32 read-write
IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm.
                 dvbRcsRtnStatus 1.3.6.1.2.1.10.239.1.3.2
                     dvbRcsRtnStatusEbN0 1.3.6.1.2.1.10.239.1.3.2.1 integer32 read-only
The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units.
                     dvbRcsRtnStatusSFDuration 1.3.6.1.2.1.10.239.1.3.2.2 unsigned32 read-only
The duration of the currently applied return link superframe structure, in tenths of milliseconds.
                     dvbRcsRtnStatusPayloadUnit 1.3.6.1.2.1.10.239.1.3.2.3 integer read-only
Indicates if the payload unit used for the return link is ATM or MPEG. Enumeration: 'unitATM': 0, 'unitMPEG': 1.
         dvbRcsConformance 1.3.6.1.2.1.10.239.2
             dvbRcsRcstGroups 1.3.6.1.2.1.10.239.2.1
                 dvbRcsRcstSystemGroup 1.3.6.1.2.1.10.239.2.1.1
A collection of objects providing information applicable for basic device management support.
                 dvbRcsRcstNetworkGroup 1.3.6.1.2.1.10.239.2.1.2
A collection of objects providing basic networking management support.
                 dvbRcsRcstExtNetworkGroup 1.3.6.1.2.1.10.239.2.1.3
A collection of objects providing extended networking management support.
                 dvbRcsRcstDnsGroup 1.3.6.1.2.1.10.239.2.1.4
A collection of objects providing DNS management support.
                 dvbRcsRcstInstallGroup 1.3.6.1.2.1.10.239.2.1.5
A collection of objects providing information applicable for basic installation support.
                 dvbRcsRcstExtInstallGroup 1.3.6.1.2.1.10.239.2.1.6
A collection of objects providing extended device installation support.
                 dvbRcsRcstQosGroup 1.3.6.1.2.1.10.239.2.1.7
A collection of objects providing basic access to QoS configuration data.
                 dvbRcsRcstEnhancedClassifierGroup 1.3.6.1.2.1.10.239.2.1.8
A collection of objects providing support for management of the enhanced classifier.
                 dvbRcsRcstMpegQosGroup 1.3.6.1.2.1.10.239.2.1.9
A collection of objects providing access to MPEG-related link QoS configuration data.
                 dvbRcsRcstGlobalQosGroup 1.3.6.1.2.1.10.239.2.1.10
A collection of objects providing access to global RCST QoS configuration data.
                 dvbRcsRcstStrictQosGroup 1.3.6.1.2.1.10.239.2.1.11
A collection of objects allowing management of strict channel ID dispatching.
                 dvbRcsRcstControlGroup 1.3.6.1.2.1.10.239.2.1.12
A collection of objects allowing basic RCST control.
                 dvbRcsRcstExtControlGroup 1.3.6.1.2.1.10.239.2.1.13
A collection of objects allowing extended RCST control.
                 dvbRcsRcstStateGroup 1.3.6.1.2.1.10.239.2.1.14
A collection of objects allowing access to RCST state.
                 dvbRcsFwdConfigGroup 1.3.6.1.2.1.10.239.2.1.15
A collection of objects providing basic start forward link configuration support.
                 dvbRcsFwdStatusGroup 1.3.6.1.2.1.10.239.2.1.16
A collection of objects providing forward link status.
                 dvbRcsRtnConfigGroup 1.3.6.1.2.1.10.239.2.1.17
A collection of objects providing basic return link configuration support.
                 dvbRcsRtnExtConfigGroup 1.3.6.1.2.1.10.239.2.1.18
A collection of objects providing extended return link configuration support.
                 dvbRcsRtnStatusGroup 1.3.6.1.2.1.10.239.2.1.19
A collection of objects allowing access to return link status.
                 dvbRcsRtnExtStatusGroup 1.3.6.1.2.1.10.239.2.1.20
A collection of objects allowing access to extended return link status.
                 dvbRcsRcstOduListGroup 1.3.6.1.2.1.10.239.2.1.21
A collection of objects supporting flexible selection of ODU devices.
             dvbRcsRcstCompliances 1.3.6.1.2.1.10.239.2.2
                 dvbRcsRcstCompliance1 1.3.6.1.2.1.10.239.2.2.1
The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of the options or features defined in the SatLabs System Recommendations. The supported options and features of a terminal are declared in objects dvbRcsSystemSatLabsOptionsDeclaration and dvbRcsSystemSatLabsFeaturesDeclaration respectively.