DVB-CABLE-INA-IF-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: DVB-CABLE-INA-IF-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dvbInaIf 1.3.6.1.2.1.10.146
The MIB modules for INAs that conform to the EuroModem specification. This MIB assumes the INA implements MIB-II RFC 1213 The original MIB definition work was carried out for the DVB-RC group by Bert Van Willigen Philips Research Laboratory Eindhoven, The Netherlands.
         dvbInaIfMIBObjects 1.3.6.1.2.1.10.146.1
             dvbInaIfMac 1.3.6.1.2.1.10.146.1.1
                 dvbInaIfMacTable 1.3.6.1.2.1.10.146.1.1.1 no-access
Describes the attributes of each MAC interface, extending the information available from ifEntry.
                     dvbInaIfMacEntry 1.3.6.1.2.1.10.146.1.1.1.1 no-access
An entry containing objects describing attributes of each MAC entry, extending the information in ifEntry. An entry in this table exists for each ifEntry with an ifType of dvbRecMacLayer(146). The state of the MAC depends on the state of the INA. If the INA is not operational also the MAC is not operational.
                         dvbInaIfMacDeviceCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.1 octet string read-only
This 32-bit object specifies the maximum capabilities of this MAC entity. This is the possible set of capability for this INA.
                         dvbInaIfMacDeviceExtendedCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.2 octet string read-only
This 32-bit object specifies the maximum extended capabilities of this MAC entity. This is the possible set of capability for this INA.
                         dvbInaIfMacCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.3 octet string read-write
This 32-bit object specifies the capabilities of this MAC entity. It is equal to or a subset of dvbInaIfMacDeviceCapabilities. Default this parameter is equal to dvbInaIfMacDeviceCapabilities. The object can be used to restrict the capabilities for this MAC entity.
                         dvbInaIfMacExtendedCapabilities 1.3.6.1.2.1.10.146.1.1.1.1.4 octet string read-write
This 32-bit object specifies the extended capabilities of this MAC entity. It is equal to or a subset of dvbInaIfMacDeviceExtendedCapabilities. Default this parameter is equal to dvbInaIfMacDeviceExtendedCapabilities. The object can be used to restrict the extended capabilities for this MAC entity.
                         dvbInaIfMacProtocolSupport 1.3.6.1.2.1.10.146.1.1.1.1.5 integer read-write
Specifies the MAC standard version supported by this MAC entity. Optional, this parameter can be written to force a particular MAC version to be executed by the INA. Enumeration: 'en301199': 20, 'ets300800v20davic15': 29, 'ets300800v10': 30, 'davic10': 0, 'davic12': 2, 'davic11': 1.
                         dvbInaIfMacTimeout0 1.3.6.1.2.1.10.146.1.1.1.1.6 etstimeout read-write
Time-out value 0x0.
                         dvbInaIfMacTimeout1 1.3.6.1.2.1.10.146.1.1.1.1.7 etstimeout read-write
Time-out value 0x1.
                         dvbInaIfMacTimeout2 1.3.6.1.2.1.10.146.1.1.1.1.8 etstimeout read-write
Time-out value 0x2.
                         dvbInaIfMacTimeout3 1.3.6.1.2.1.10.146.1.1.1.1.9 etstimeout read-write
Time-out value 0x3.
                         dvbInaIfMacTimeout4 1.3.6.1.2.1.10.146.1.1.1.1.10 etstimeout read-write
Time-out value 0x4.
                         dvbInaIfMacTimeoutD 1.3.6.1.2.1.10.146.1.1.1.1.11 etstimeout read-write
Time-out value 0xD. Terminal Time-Out, Security Sign-On.
                         dvbInaIfMacTimeoutE 1.3.6.1.2.1.10.146.1.1.1.1.12 etstimeout read-write
Time-out value 0xE. Terminal Time-Out, Main Key Exchange.
                         dvbInaIfMacTimeoutF 1.3.6.1.2.1.10.146.1.1.1.1.13 etstimeout read-write
Time-out value 0xF. Terminal Time-Out, Quick/Explicit Key exchange.
                         dvbInaIfMacRapidSignOnEnable 1.3.6.1.2.1.10.146.1.1.1.1.14 truthvalue read-write
This Boolean parameter specifies whether the NIU's are allowed to do a rapid sign-on when they enter the sign-on process. (See the Need_Calibration bit in the Sign-On_Request_Message.). By default this object is False.
                         dvbInaIfMacRespCollTimeWindow 1.3.6.1.2.1.10.146.1.1.1.1.15 unsigned32 read-write
Specifies the maximum time for the sign-on response message transmission randomisation.
                         dvbInaIfMacAddressFilterUse 1.3.6.1.2.1.10.146.1.1.1.1.16 integer read-write
This setting controls the use of the of the Address filter in the Sign-On Request Message. Disabled : The address filter is not used. Managed : The manager can control the use of the address filter with dvbInaIfMacAddressPositionMask and dvbInaIfMacAddressComparisonValue Automatic : The INA controls use of the address filter itself. The readback values of dvbInaIfMacAddressPositionMask and dvbInaIfMacAddressComparisonValue will not necessary reflect the values used by the INA. Enumeration: 'disabled': 1, 'managed': 2, 'automatic': 3.
                         dvbInaIfMacAddressPositionMask 1.3.6.1.2.1.10.146.1.1.1.1.17 integer read-write
Indicates the bit positions in the NIU MAC address that are used for address filtering comparison.
                         dvbInaIfMacAddressComparisonValue 1.3.6.1.2.1.10.146.1.1.1.1.18 integer read-write
Specifies the value that the NIU should use for MAC address comparison.
                         dvbInaIfMacGrantProtocolTimeOut 1.3.6.1.2.1.10.146.1.1.1.1.19 unsigned32 read-write
Default value for the time that the NIU should wait before verifying the status of pending grants. See also dvbInaIfNiuGrantProtocolTimeOut.
                         dvbInaIfMacIdleInterval 1.3.6.1.2.1.10.146.1.1.1.1.20 unsigned32 read-write
Specifies the transmission interval in seconds to be used for the MAC Idle message. When this value is zero, no idle messages shall be sent.
                         dvbInaIfMacIdleInvalidCount 1.3.6.1.2.1.10.146.1.1.1.1.21 integer read-write
Specifies a MAC Idle message invalid period in number of dvbInaIfMacIdleInterval, after which the NIU is declared to be signed-off. For example, if dvbInaIfMacIdleInterval is 5 seconds and this parameter is 3, then if in 15 seconds no data and/or MAC Idle messages are received, the INA will assume that the NIU in question has signed-off. This object is only valid when dvbInaIfMacIdleInterval is non-zero.
                         dvbInaIfMacN 1.3.6.1.2.1.10.146.1.1.1.1.22 integer read-write
Maximum value of the upstream slot position register.
                         dvbInaIfMacMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.1.1.1.23 integer read-write
The default value for the Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. See also dvbInaIfConMaxContentionMsgLen.
                         dvbInaIfMacMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.1.1.1.24 integer read-write
The default value for the Maximum_Reservation_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. See also dvbInaIfConMaxReservationMsgLen.
                         dvbInaIfMacNiuCount 1.3.6.1.2.1.10.146.1.1.1.1.25 gauge32 read-only
Number of connected NIUs.
                         dvbInaIfMacConnections 1.3.6.1.2.1.10.146.1.1.1.1.26 gauge32 read-only
The number of connections currently active for this MAC entity.
                         dvbInaIfMacUnknownNiuError 1.3.6.1.2.1.10.146.1.1.1.1.27 counter32 read-only
This value is incremented if a message is received from a unknown NIU, except if it is a SignOn_Response Message.
                         dvbInaIfMacMsgDataError 1.3.6.1.2.1.10.146.1.1.1.1.28 counter32 read-only
This value is incremented if a MAC message is received with a data error, i.e. 1) is too short, 2) has an illegal Connection ID or Reservation ID, 3) is a reservation message from a NIU not reservation capable, 4) is a security message from a NIU not security capable 5) is an illegal MAC message.
                         dvbInaIfMacMsgHdrError 1.3.6.1.2.1.10.146.1.1.1.1.29 counter32 read-only
This value is incremented if a MAC message is received with a header error, i.e. 1) is too short, 2) does not contain a MAC address.
                         dvbInaIfMacInvalidNiu 1.3.6.1.2.1.10.146.1.1.1.1.30 counter32 read-only
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Invalid_STB/NIU bit set.
                         dvbInaIfMacTimingRangingError 1.3.6.1.2.1.10.146.1.1.1.1.31 counter32 read-only
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Timing_Ranging_Error bit set.
                         dvbInaIfMacPowerRangingError 1.3.6.1.2.1.10.146.1.1.1.1.32 counter32 read-only
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Power_Ranging_Error bit set.
                         dvbInaIfMacOtherSignOnError 1.3.6.1.2.1.10.146.1.1.1.1.33 counter32 read-only
This value is incremented if a MAC Initialisation Complete Message is transmitted with the Other_Error bit set.
             dvbInaIfProvision 1.3.6.1.2.1.10.146.1.2
                 dvbInaIfProvChTable 1.3.6.1.2.1.10.146.1.2.1 no-access
This table specifies the information for the Default Configuration Message transmitted on the Provisioning channel.
                     dvbInaIfProvChEntry 1.3.6.1.2.1.10.146.1.2.1.1 no-access
An entry containing objects describing information for the Default Configuration Message transmitted on the Provisioning channel. More than one downstream can use than same entry or different entries can be made for different downstreams. If provisioning is done on an other INA, this table will be empty.
                         dvbInaIfProvChIndex 1.3.6.1.2.1.10.146.1.2.1.1.1 integer no-access
Index of this table entry.
                         dvbInaIfProvChRowAccessStatus 1.3.6.1.2.1.10.146.1.2.1.1.2 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfProvChServiceChIfIndex 1.3.6.1.2.1.10.146.1.2.1.1.3 interfaceindex read-only
The ifIndex of the upstream channel used as Service Channel for the provisioning.
                         dvbInaIfProvChBackupServiceChIfIndex 1.3.6.1.2.1.10.146.1.2.1.1.4 interfaceindex read-only
The ifIndex of the upstream channel used as Backup Service Channel for the provisioning.
                         dvbInaIfProvChIncrPowerRetryCount 1.3.6.1.2.1.10.146.1.2.1.1.5 integer read-only
Specifies the number of attempts the NIU should do to enter the system at the same power level before incrementing its upstream transmit power for this MAC entity.
                         dvbInaIfProvChMaxPowerLevel 1.3.6.1.2.1.10.146.1.2.1.1.6 integer read-only
Specifies the maximum power in dBuV the NIU is allowed to transmit upstream for this MAC entity.
                         dvbInaIfProvChMinPowerLevel 1.3.6.1.2.1.10.146.1.2.1.1.7 integer read-only
Specifies the minimum power in dBuV the NIU has to transmit upstream for this MAC entity.
                         dvbInaIfProvChMaxBackOffExponent 1.3.6.1.2.1.10.146.1.2.1.1.8 integer read-only
Specifies the maximum back off exponent counter for this MAC entity.
                         dvbInaIfProvChMinBackOffExponent 1.3.6.1.2.1.10.146.1.2.1.1.9 integer read-only
Specifies the minimum back off exponent counter for this MAC entity.
                         dvbInaIfProvChAbsoluteTimeOffset 1.3.6.1.2.1.10.146.1.2.1.1.10 integer read-only
Specifies the default absolute time offset in 100 ns units to be used for first sign-on of a NIU for this MAC entity.
             dvbInaIfDsCh 1.3.6.1.2.1.10.146.1.3
                 dvbInaIfDsChTable 1.3.6.1.2.1.10.146.1.3.1 no-access
This table describes the attributes of downstream channels (frequency bands).
                     dvbInaIfDsChEntry 1.3.6.1.2.1.10.146.1.3.1.1 no-access
List of attributes for a single Downstream channel. An entry in this table exists for each downstream ifEntry.
                         dvbInaIfDsChFrequency 1.3.6.1.2.1.10.146.1.3.1.1.1 downfrequency read-write
The centre of the downstream frequency associated with this channel.
                         dvbInaIfDsChConnections 1.3.6.1.2.1.10.146.1.3.1.1.2 gauge32 read-only
Specifies the number of connections currently active for this down stream channel.
                         dvbInaIfDsChTxPower 1.3.6.1.2.1.10.146.1.3.1.1.3 integer read-write
Specifies the down stream transmission power in dBuV of this interface.
                         dvbInaIfDsChDownCoaxId 1.3.6.1.2.1.10.146.1.3.1.1.4 unsigned32 read-write
Specifies the coax ID of the Downstream HFC segment to which the downstream channel is connected. By default this parameter is zero.
                         dvbInaIfDsChSymbolRate 1.3.6.1.2.1.10.146.1.3.1.1.5 downstreamsymbolrate read-write
Specifies the symbol rate for the Downstream channel.
                         dvbInaIfDsChModulation 1.3.6.1.2.1.10.146.1.3.1.1.6 modulation read-write
Specifies the modulation for the Downstream channel.
                         dvbInaIfDsChType 1.3.6.1.2.1.10.146.1.3.1.1.7 integer read-write
Specifies if the Downstream channel is inband or out-of-band. Enumeration: 'ib': 1, 'oob': 2.
                         dvbInaIfDsChDefaultPID 1.3.6.1.2.1.10.146.1.3.1.1.8 unsigned32 read-write
The default value of the MPEG PID of the elementary stream that carries the data on this downstream. See also dvbInaIfConPID.
                         dvbInaIfDsChProvFrequency 1.3.6.1.2.1.10.146.1.3.1.1.9 downfrequency read-write
Specifies the Downstream frequency of the provisioning channel. This setting is always used, no matter the provisioning channel is on this INA or on another. If the provisioning channel is on this INA, the value will be the frequency of one of the downstreams.
                         dvbInaIfDsChProvDownstreamType 1.3.6.1.2.1.10.146.1.3.1.1.10 integer read-write
Specifies the type of the downstream provisioning channel in the Provisioning Channel Message. 0 = QAM_MPEG, 1 = QPSK_1,544, 2 = QPSK_3,088 3..255 Reserved This setting is always used, no matter the provisioning channel is on this INA or on another. If the provisioning channel is on this INA, the value can be derived from the ib/oob type and modulation.
                         dvbInaIfDsChProvEnable 1.3.6.1.2.1.10.146.1.3.1.1.11 truthvalue read-write
Specifies if this downstream channel is a Provisioning channel and as such transmits the Default Configuration Message. true = Provisioning channel false = not a Provisioning channel.
                         dvbInaIfDsChProvTableIndex 1.3.6.1.2.1.10.146.1.3.1.1.12 integer read-write
If this downstream channel is a provisioning channel, then an index to the Provisioning tabel must be give here.
             dvbInaIfUsCh 1.3.6.1.2.1.10.146.1.4
                 dvbInaIfUsChTable 1.3.6.1.2.1.10.146.1.4.1 no-access
Describes the attributes of attached upstream channels (frequency bands).
                     dvbInaIfUsChEntry 1.3.6.1.2.1.10.146.1.4.1.1 no-access
List of attributes for a single upstream channel. The state of the upstream channel depends on the state of the MAC and downstream channel. If one of both or both are non-operational also the state upstream channel(s) shall be ready. That in the case of Space division Multiplex SDM each upstream channel has a different non-zero Coax ID.
                         dvbInaIfUsChFrequency 1.3.6.1.2.1.10.146.1.4.1.1.1 upfrequency read-write
Specifies the frequency in Hz of the carrier used for this upstream channel.
                         dvbInaIfUsChSymbolRate 1.3.6.1.2.1.10.146.1.4.1.1.2 upstreamsymbolrate read-write
Specifies the symbol rate for this upstream channel.
                         dvbInaIfUsChModulation 1.3.6.1.2.1.10.146.1.4.1.1.3 modulation read-write
Specifies the modulation for this upstream channel.
                         dvbInaIfUsChMacFlagSet 1.3.6.1.2.1.10.146.1.4.1.1.4 macflagset read-only
Specifies the MAC flag set assigned to this upstream channel.
                         dvbInaIfUsChId 1.3.6.1.2.1.10.146.1.4.1.1.5 integer read-only
Specifies the logical channel number associated with this upstream channel.
                         dvbInaIfUsChConnections 1.3.6.1.2.1.10.146.1.4.1.1.6 gauge32 read-only
Specifies the number of connections currently active for this upstream channel.
                         dvbInaIfUsChCalibrationRxPower 1.3.6.1.2.1.10.146.1.4.1.1.9 integer read-write
Specifies the target receive signal power in dBuV to which the NIUs on this upstream channel are calibrated
                         dvbInaIfUsChUpCoaxId 1.3.6.1.2.1.10.146.1.4.1.1.10 unsigned32 read-write
Specifies the coax ID of the UpStream HFC segment to which the upstream channel is connected. By default this parameter is zero.
                         dvbInaIfUsChDownCoaxId 1.3.6.1.2.1.10.146.1.4.1.1.11 unsigned32 read-write
Specifies the coax ID of the Downstream HFC segment to which the upstream channel is connected. By default this parameter is zero.
                         dvbInaIfUsChAtmCells 1.3.6.1.2.1.10.146.1.4.1.1.12 counter64 read-only
Total number of recieved ATM Cells. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmTimingErrors 1.3.6.1.2.1.10.146.1.4.1.1.13 counter64 read-only
Number of ATM Cells received with Timing Error. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmPowerErrors 1.3.6.1.2.1.10.146.1.4.1.1.14 counter64 read-only
Number of ATM Cells received with Signal Level Error. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmRSCorrectableErrors 1.3.6.1.2.1.10.146.1.4.1.1.15 counter64 read-only
Number of ATM Cells received with correctable Reed-Solomon Errors. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmRSNonCorrectableErrors 1.3.6.1.2.1.10.146.1.4.1.1.16 counter64 read-only
Number of ATM Cells received with non-correctable Reed-Solomon Errors. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmHecErrors 1.3.6.1.2.1.10.146.1.4.1.1.17 counter64 read-only
Number of ATM Cells received with HEC Error. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAal5CrcErrors 1.3.6.1.2.1.10.146.1.4.1.1.18 counter64 read-only
Number AAL5 frames received with CRC error. 0 can indicate the counter is not supported.
                         dvbInaIfUsChAtmCollisionErrors 1.3.6.1.2.1.10.146.1.4.1.1.19 counter64 read-only
Number of ATM Cells received with Collision detected. 0 can indicate the counter is not supported.
             dvbInaIfNiu 1.3.6.1.2.1.10.146.1.5
                 dvbInaIfNiuTable 1.3.6.1.2.1.10.146.1.5.1 no-access
Describes the attributes of Network Interface Units.
                     dvbInaIfNiuEntry 1.3.6.1.2.1.10.146.1.5.1.1 no-access
Initially the table shall be empty. A new entry for a NIU is automatically created when the NIU in question signs on. Furthermore, the manager through the dvbInaIfNiuRowAccessStatus object can create new entries. This can be used in the case of re-provisioning where by the manager first makes an entry and sets all relevant parameters before the NIU is re-provisioned to this INA. When an entry is created for a NIU, also automatically an entry is created in the connection table for the default connection of the NIU in question. When a NIU entry is deleted, also all associated connection entries are deleted.
                         dvbInaIfNiuMacAddress 1.3.6.1.2.1.10.146.1.5.1.1.1 macaddress no-access
A 48-bit value representing the unique MAC address of the NIU.
                         dvbInaIfNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.5.1.1.2 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfNiuState 1.3.6.1.2.1.10.146.1.5.1.1.3 integer read-only
Returned status information is the NIU status as assumed by the INA. The following states are possible: null(1) Any state other than below. ranging(2): The NIU has responded to a [MAC] Sign-on Request Message but the time ranging and power calibration is not yet complete. rangingAborted(3), The INA has sent a Initalisation Complete Message to the NIU with Completion_Status_Field != 0 rangingComplete(4), The INA has sent a Initalisation Complete Message to the NIU with Completion_Status_Field = 0 connecting(5), The INA has sent a Connect Message for first connection and is waiting for a Connect Response Message from the NIU. connectComplete(6) The INA has sent a Connect Confirm Message for first connection to the NIU. stopped(7) The NUI is in the stopped transmission state after the INA has send a Stop_Upstream_Transmission to the NIU and the NIU has returned a Link Management Response. NOTE: The INA only needs to report states it is able to detect. Enumeration: 'ranging': 2, 'connectComplete': 6, 'stopped': 7, 'rangingComplete': 4, 'connecting': 5, 'null': 1, 'rangingAborted': 3.
                         dvbInaIfNiuDesiredState 1.3.6.1.2.1.10.146.1.5.1.1.4 integer read-only
Specifies the desired state of the NIU. This parameter can be set to one of the following values: down : Initial state. Disable NIU operation. start : Enable NIU operation. stop : Stop upstream transmission from the NIU. Enumeration: 'down': 1, 'start': 2, 'stop': 3.
                         dvbInaIfNiuDownIfIndex 1.3.6.1.2.1.10.146.1.5.1.1.5 interfaceindexorzero read-only
Specifies the IfIndex of the downstream channel on which the NIU is tuned.
                         dvbInaIfNiuUpIfIndex 1.3.6.1.2.1.10.146.1.5.1.1.6 interfaceindexorzero read-only
Specifies the IfIndex of the upstream channel that is used by the NIU.
                         dvbInaIfNiuUpTxLevel 1.3.6.1.2.1.10.146.1.5.1.1.7 integer read-only
Specifies the upstream transmit level. This is the INA notion of NIU transmit level. (See also 'dvbInaIfNiuRespTxLevel'.)
                         dvbInaIfNiuTimeOffset 1.3.6.1.2.1.10.146.1.5.1.1.8 integer32 read-only
Specifies the time offset. This is the INA notion of NIU time offset. (See also 'dvbInaIfNiuRespTimeOffset'.)
                         dvbInaIfNiuStatus 1.3.6.1.2.1.10.146.1.5.1.1.9 unsigned32 read-only
This 32-bit object specifies the status of this NIU. See Sign-On Response Message and Status Response Message [1] for the exact bit assignment. This object is updated after the reception of a Status Response Message [1].
                         dvbInaIfNiuErrorCode 1.3.6.1.2.1.10.146.1.5.1.1.10 unsigned32 read-only
This 16-bit object specifies the error code in the Sign-On Response Message. See ES 200 800 for the exact bit assignment.
                         dvbInaIfNiuRetryCount 1.3.6.1.2.1.10.146.1.5.1.1.11 integer read-only
This 8-bit object specifies the number of transmissions of the Sign-On Response Message. (See [1]).
                         dvbInaIfNiuCapabilities 1.3.6.1.2.1.10.146.1.5.1.1.12 octet string read-only
This 32-bit object specifies the capabilities of this NIU. See also ES 200 800 for the bit assignment.
                         dvbInaIfNiuExtendedCapabilities 1.3.6.1.2.1.10.146.1.5.1.1.13 octet string read-only
This 32-bit object specifies the extended capabilities of this NIU. See also ES 200 800 and ECR 5 for the bit assignment.
                         dvbInaIfNiuInitCompletionStatus 1.3.6.1.2.1.10.146.1.5.1.1.14 integer read-only
This 8-bit object indicates the errors in the initialisation phase of this NIU. See the Initialization Complete Message ES 200 800 for the exact bit assignment.
                         dvbInaIfNiuRequestStatus 1.3.6.1.2.1.10.146.1.5.1.1.15 integer read-only
This object triggers the transmission of a Status Request Message [1]. This parameter can be set to one of the following parameters: 'NiuReqAddressPars(0)': request address parameters, 'NiuReqErrorPars(1)': request error parameters, 'NiuReqConnectionsPars(2)': request connection parameters, and 'NiuReqPhyLayerPars(3)': request physical layer parameters. When read this object returns 'NiuReqAddressPars(0)'. Enumeration: 'niuReqErrorPars': 1, 'niuReqPhyLayerPars': 3, 'niuReqAddressPars': 0, 'niuReqConnectionsPars': 2.
                         dvbInaIfNiuResponseNumber 1.3.6.1.2.1.10.146.1.5.1.1.16 counter32 read-only
This object is incremented when a Status Response Message [1] is received. This object can be polled to detect the reception of this message. After reset this object is zero.
                         dvbInaIfNiuRespTxLevel 1.3.6.1.2.1.10.146.1.5.1.1.17 integer read-only
Specifies the transmit power level of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuRespTimeOffset 1.3.6.1.2.1.10.146.1.5.1.1.18 integer32 read-only
Specifies the time offset of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuRespOoBDownFrequency 1.3.6.1.2.1.10.146.1.5.1.1.19 downfrequency read-only
Specifies the OoB downstream frequency of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuRespIBDownFrequency 1.3.6.1.2.1.10.146.1.5.1.1.20 downfrequency read-only
Specifies the IB downstream frequency of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuRespSNRLevel 1.3.6.1.2.1.10.146.1.5.1.1.21 integer read-only
Specifies the estimated SNR level at the RF input of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuRespRxLevel 1.3.6.1.2.1.10.146.1.5.1.1.22 integer read-only
Specifies the estimated downstream power level of the MAC messages at the RF input of the NIU. This object is updated after the reception of a Status Response Message [1] that is a response on the 'NiuReqPhyLayerPars(3)' request.
                         dvbInaIfNiuDefaultConnectionId 1.3.6.1.2.1.10.146.1.5.1.1.23 unsigned32 read-only
Specifies the ConnectionId of the default connection that is assigned to this NIU.
                         dvbInaIfNiuLifetime 1.3.6.1.2.1.10.146.1.5.1.1.24 unsigned32 read-only
Defines how long after the NIU was signed off, the entry is removed from the table. An infinite(0) value would mean that the values are stored at least until the next reboot of the INA.
                         dvbInaIfNiuGrantProtocolTimeOut 1.3.6.1.2.1.10.146.1.5.1.1.25 unsigned32 read-only
The time that the NIU should wait before verifying the status of pending grants. Default value is dvbInaIfMacGrantProtocolTimeOut.
                         dvbInaIfNiuSlotConfigurationErr 1.3.6.1.2.1.10.146.1.5.1.1.26 counter32 read-only
NIU Error Parameter: Slot_Configuration_CRC_Error_Count, the number of errors in Slot_Configuration_Count R bytes, as found by the CRC decoder.
                         dvbInaIfNiuAtmPacketLoss 1.3.6.1.2.1.10.146.1.5.1.1.27 counter32 read-only
NIU Error Parameter: ATM_Packet_Loss_Count, the number of received ATM cells that were lost, either due to unrecoverable Reed-Solomon errors or because of an erroneous HEC of the ATM cell header.
                         dvbInaIfNiuSlEsCrcErr 1.3.6.1.2.1.10.146.1.5.1.1.28 counter32 read-only
Niu Error Parameter: SL-ESF_CRC_Error_Count, the number of CRC errors found in consecutive C1-C6.
                         dvbInaIfNiuSlEsFrameCount 1.3.6.1.2.1.10.146.1.5.1.1.29 counter32 read-only
NIU Error Parameter: SL-ESF_Frame_Count, the number of frames the statistics apply to.
                         dvbInaIfNiuSlotConfigurationCount 1.3.6.1.2.1.10.146.1.5.1.1.30 counter32 read-only
NIU Error Parameter: Slot_Configuration_Count, the number of R-byte sets (Rxa-Rxc) used to calculate Slot_Configuration_CRC_Error_Count.
                         dvbInaIfNiuRSErrCorrectable 1.3.6.1.2.1.10.146.1.5.1.1.31 counter32 read-only
NIU Error Parameter: Reed_Solomon_Errors_Correctable, MPEG frames received with correctable Reed-Solomon Errors (IB only).
                         dvbInaIfNiuRSErrNonCorrectable 1.3.6.1.2.1.10.146.1.5.1.1.32 counter32 read-only
NIU Error Parameter: Reed_Solomon_Errors_Non_Correctable, MPEG frames received with non-correctable Reed-Solomon Errors (IB only).
                         dvbInaIfNiuSignOnTime 1.3.6.1.2.1.10.146.1.5.1.1.33 timeticks read-only
The value of sysUpTime at the time this NIU was signed on. If the time is unknown, this value shall be zero.
                         dvbInaIfNiuDsChBytes 1.3.6.1.2.1.10.146.1.5.1.1.34 counter64 read-only
Number of bytes sent in direction INA to NIU.
                         dvbInaIfNiuUsChBytes 1.3.6.1.2.1.10.146.1.5.1.1.35 counter64 read-only
Number of bytes sent in direction NIU to INA. Includes backbone, NIU-to-NIU and broadcast/multicast traffic.
                         dvbInaIfNiuTimeRanging 1.3.6.1.2.1.10.146.1.5.1.1.36 counter32 read-only
Number of times the NIU has been time ranged.
                         dvbInaIfNiuPowerRanging 1.3.6.1.2.1.10.146.1.5.1.1.37 counter32 read-only
Number of times the NIU has been power ranged.
             dvbInaIfConnection 1.3.6.1.2.1.10.146.1.6
                 dvbInaIfConTable 1.3.6.1.2.1.10.146.1.6.1 no-access
Contains information about DVB-RC MAC connections.
                     dvbInaIfConEntry 1.3.6.1.2.1.10.146.1.6.1.1 no-access
Initially the table shall be empty. A new entry for a connection is automatically generated when a Resource Request Message is received from the NIU in question requesting a new connection. Also during reprovisioning new entries are created. Furthermore, the manager through the dvbInaIfConAccessStatus object can create new entries. Connection table entries shall be deleted, when the associated NIU entry is deleted. Furthermore, the manager can delete unused connection entries. The following parameters can only be set when the connection is in state down(1) dvbInaIfConAccessStatus, dvbInaIfConEncapsulation, dvbInaIfConFilterMACAddress, dvbInaIfConPID.
                         dvbInaIfConNiuMacAddress 1.3.6.1.2.1.10.146.1.6.1.1.1 macaddress no-access
MAC address of the NIU that is associated with the connection.
                         dvbInaIfConConnectionId 1.3.6.1.2.1.10.146.1.6.1.1.2 unsigned32 no-access
Specifies the connection identifier to be used for this connection.
                         dvbInaIfConCurrentState 1.3.6.1.2.1.10.146.1.6.1.1.3 integer read-only
Current state of the connection. The following states are possible: down(1) In this state an entry is made in the connection table for the connection in question. However, there is not (yet) any connection on MAC layer between the INA and NIU. settingUp(2) Either the NIU in question has requested a connection via a [MAC] Resource Request message, or the manager has initiated a (new) connection by setting dvbInaConDesiredState to the state Up. up(3) In this state the connection in question is up and running. breakingDown(4) Either the NIU in question has requested to release the connection via a [MAC] Resource Request message, or the manager has initiated the release of the connection by setting dvbInaConDesiredState to the state: Down. downAlloc(5) In this state an entry is made in the connection table for the connection in question. Furthermore, the bandwidth for the fixed rate connection is allocated. However, the connection doesn't (yet) exist on MAC layer between the INA and NIU. alarm(6) The connection in question is in the alarm state. his means that either the parameter setting is not valid, or the scheduler of the MAC has not the resources to allocate the requested bandwidth for a fixed rate connection, or the NIU didn't response in time during the set-up of the connection or during the break down of it. This state shall be left, when either the manager sets dvbInaConDesiredState to Down(1) or, the NIU enters the Null(1) state. Enumeration: 'downAlloc': 5, 'up': 3, 'alarm': 6, 'settingUp': 2, 'breakingDown': 4, 'down': 1.
                         dvbInaIfConDesiredState 1.3.6.1.2.1.10.146.1.6.1.1.4 integer read-only
Desired state for the connection. The following desired states are possible: down(1), up(3) and, downAlloc(5). Enumeration: 'down': 1, 'downAlloc': 5, 'up': 3.
                         dvbInaIfConConnectionType 1.3.6.1.2.1.10.146.1.6.1.1.5 bits read-only
Specifies the kind of connection: fixed rate, contention based, or reservation based. This parameter can be set to a value that is an OR of the following bits: 'conTypeFixedRate(0)' 'conTypeContention(1)' 'conTypeReservation(2)' Default this object is 'conTypeContention(1)'. Bits: 'conTypeReservation': 2, 'conTypeContention': 1, 'conTypeFixedRate': 0.
                         dvbInaIfConAccessStatus 1.3.6.1.2.1.10.146.1.6.1.1.6 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfConEncapsulation 1.3.6.1.2.1.10.146.1.6.1.1.7 integer read-only
This object indicates the type of encapsulation provided on this connection. This object can have one of the following values: 'directIp(1)', 'ethernetMacBridging(2)', or 'ppp(3)'. By default this parameter is set to 'directIp(1)'. Enumeration: 'directIp': 1, 'ppp': 3, 'ethernetMacBridging': 2.
                         dvbInaIfConAtmDownstreamVCC 1.3.6.1.2.1.10.146.1.6.1.1.8 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission.
                         dvbInaIfConAtmUpstreamVCC 1.3.6.1.2.1.10.146.1.6.1.1.9 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission.
                         dvbInaIfConFilterMACAddress 1.3.6.1.2.1.10.146.1.6.1.1.10 macaddress read-only
Specifies the 'soft' MPEG MPE MAC address used to filter the data out of the downstream IB transmission. This is found in the Downstream_Multiprotocol_CBD substructure in the Connect Message.
                         dvbInaIfConPID 1.3.6.1.2.1.10.146.1.6.1.1.11 unsigned32 read-only
Specifies the MPEG PID of the elementary stream that carries the data.
                         dvbInaIfConMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.6.1.1.12 integer read-only
The Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. The default value should be dvbInaIfMacMaxContentionMsgLen.
                         dvbInaIfConMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.6.1.1.13 integer read-only
This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. The default value should be dvbInaIfMacMaxReservationMsgLen.
                         dvbInaIfConAuxFlags 1.3.6.1.2.1.10.146.1.6.1.1.14 integer read-only
The Connection_Control_Field_Aux from the Connect Message Structure. This is used to indicate if the Priority, Downstream flowspec and Session binding objects are used for the connection.
                 dvbInaIfConQosTable 1.3.6.1.2.1.10.146.1.6.2 no-access
Contains information about connection quality for DVB-RC MAC connections. Both upstream and downstream quality parameters are found.
                     dvbInaIfConQosEntry 1.3.6.1.2.1.10.146.1.6.2.1 no-access
An entry in the table is automatically created when a new entry in the connection table connection is created and the INA supports Quality of Service on the MAC layer. You must always create an entry in the Connection table first and this will automatically create an entry in the QoS table. The entries are deleted when the contection table entry is deleted.
                         dvbInaIfConQosPriority 1.3.6.1.2.1.10.146.1.6.2.1.1 integer read-write
The priority of the connection. Connections with low priority field value can be reprovisioned in order to accommodate the requirements of connections with high priority field. Standard data flow applications 0-79 Applications with QoS requirements 80-200 High priority applications 201-255
                         dvbInaIfConQosDsReqMaxPacketSize 1.3.6.1.2.1.10.146.1.6.2.1.2 unsigned32 read-write
A downstream QoS parameter. Defines the requested maximum packet size in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
                         dvbInaIfConQosDsReqBitrate 1.3.6.1.2.1.10.146.1.6.2.1.3 unsigned32 read-write
A downstream QoS parameter. Defines requested average bit rate in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
                         dvbInaIfConQosDsReqJitter 1.3.6.1.2.1.10.146.1.6.2.1.4 integer read-write
A downstream QoS parameter. Defines the requested maximum allowed jitter in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
                         dvbInaIfConQosDsAllocMaxPacketSize 1.3.6.1.2.1.10.146.1.6.2.1.5 unsigned32 read-only
A downstream QoS parameter. This is the actual maximum packet size supported by the INA in the downstream. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
                         dvbInaIfConQosDsAllocBitrate 1.3.6.1.2.1.10.146.1.6.2.1.6 unsigned32 read-only
A downstream QoS parameter. This is the actual average bit rate supported by the INA in the downstream.
                         dvbInaIfConQosDsAllocJitter 1.3.6.1.2.1.10.146.1.6.2.1.7 integer read-only
A downstream QoS parameter. This is the actual maximum jitter supported by the INA in the downstream.
                         dvbInaIfConQosUsReqBw 1.3.6.1.2.1.10.146.1.6.2.1.8 unsigned32 read-write
An upstream QoS parameter. The requested bandwidth for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
                         dvbInaIfConQosUsReqMaxDistSlots 1.3.6.1.2.1.10.146.1.6.2.1.9 unsigned32 read-write
An upstream QoS parameter. The requested maximum distance between slots for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
                         dvbInaIfConQosUsReqFrameLength 1.3.6.1.2.1.10.146.1.6.2.1.10 unsigned32 read-write
An upstream QoS parameter. The requested frame length for the upstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request.
                         dvbInaIfConQosUsAllocBw 1.3.6.1.2.1.10.146.1.6.2.1.11 unsigned32 read-only
An upstream QoS parameter. The actual allocated bandwidth for the upstream.
                         dvbInaIfConQosUsAllocMaxDistSlots 1.3.6.1.2.1.10.146.1.6.2.1.12 unsigned32 read-only
An upstream QoS parameter. The allocated distance between slots for the upstream. In case of using a cyclic assignment, this is the parameter sent by the INA in the connect message. In the case of reservation access, this parameter is an average number, calculated by the INA to reflect the actual allocation.
                         dvbInaIfConQosUsAllocFrameLength 1.3.6.1.2.1.10.146.1.6.2.1.13 unsigned32 read-only
An upstream QoS parameter. The allocated frame length for the upstream. In case of using a cyclic assignment, this is the parameter sent by the INA in the connect message. In the case of reservation access, this parameter is an average number, calculated by the INA to reflect the actual allocation.
                         dvbInaIfConQosUsReqFixedRateMethod 1.3.6.1.2.1.10.146.1.6.2.1.14 integer read-write
An upstream QoS parameter. Request a specific fixed rate slot assignment method to be used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. If the bit Cyclic_Assignment_Needed is set, the NIU requests the cyclic method. Otherwise the slot list method. Enumeration: 'slotList': 2, 'cyclic': 1.
                         dvbInaIfConQosUsAllocFixedRateMethod 1.3.6.1.2.1.10.146.1.6.2.1.15 integer read-only
An upstream QoS parameter. Reflects the actual fixed rate slot assignment method that is used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used. Enumeration: 'slotList': 2, 'cyclic': 1.
                 dvbInaIfConSesTable 1.3.6.1.2.1.10.146.1.6.3 no-access
Contains information about session binding for DVB-RC MAC connections.
                     dvbInaIfConSesEntry 1.3.6.1.2.1.10.146.1.6.3.1 no-access
An entry in the table is automatically created when a new entry in the connection table connection is created if the INA and the NIU supports session binding. The entries are deleted when the contection table entry is deleted.
                         dvbInaIfConSesUsControl 1.3.6.1.2.1.10.146.1.6.3.1.1 unsigned32 read-only
Control which fields of the upstream session binding parameters that are used.
                         dvbInaIfConSesUsNiuClientSrcIpType 1.3.6.1.2.1.10.146.1.6.3.1.2 inetaddresstype read-only
The type of the IP source address of the NIU client.
                         dvbInaIfConSesUsNiuClientSrcIp 1.3.6.1.2.1.10.146.1.6.3.1.3 inetaddress read-only
The IP source address of the NIU client. Only used if bit 0 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsNiuClientDstIpType 1.3.6.1.2.1.10.146.1.6.3.1.4 inetaddresstype read-only
The type of the IP destination address of the NIU client.
                         dvbInaIfConSesUsNiuClientDstIp 1.3.6.1.2.1.10.146.1.6.3.1.5 inetaddress read-only
The IP destination address of the NIU client. Only used if bit 1 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsNiuClientSrcPort 1.3.6.1.2.1.10.146.1.6.3.1.6 unsigned32 read-only
The source port of the NIU client. Only used if bit 2 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsNiuClientDstPort 1.3.6.1.2.1.10.146.1.6.3.1.7 unsigned32 read-only
The destination port of the NIU client. Only used if bit 3 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsTransportProtocol 1.3.6.1.2.1.10.146.1.6.3.1.8 integer read-only
The transport protocol used by the NIU client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsNiuClientSrcMac 1.3.6.1.2.1.10.146.1.6.3.1.9 macaddress read-only
The Ethernet source MAC address of the NIU client. Only used if bit 5 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsNiuClientDstMac 1.3.6.1.2.1.10.146.1.6.3.1.10 macaddress read-only
The Ethernet destination MAC address of the NIU client. Only used if bit 6 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsEthernetProtocol 1.3.6.1.2.1.10.146.1.6.3.1.11 unsigned32 read-only
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesUsSessionId 1.3.6.1.2.1.10.146.1.6.3.1.12 unsigned32 read-only
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfConSesUsControl is set.
                         dvbInaIfConSesDsControl 1.3.6.1.2.1.10.146.1.6.3.1.13 unsigned32 read-only
Control which fields of the downstream session binding parameters that are used.
                         dvbInaIfConSesDsInaClientSrcIpType 1.3.6.1.2.1.10.146.1.6.3.1.14 inetaddresstype read-only
The type of the IP source address of the INA client.
                         dvbInaIfConSesDsInaClientSrcIp 1.3.6.1.2.1.10.146.1.6.3.1.15 inetaddress read-only
The IP source address of the INA client. Only used if bit 0 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsInaClientDstIpType 1.3.6.1.2.1.10.146.1.6.3.1.16 inetaddresstype read-only
The type of the IP destination address of the INA client.
                         dvbInaIfConSesDsInaClientDstIp 1.3.6.1.2.1.10.146.1.6.3.1.17 inetaddress read-only
The IP destination address of the INA client. Only used if bit 1 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsInaClientSrcPort 1.3.6.1.2.1.10.146.1.6.3.1.18 unsigned32 read-only
The source port of the INA client. Only used if bit 2 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsInaClientDstPort 1.3.6.1.2.1.10.146.1.6.3.1.19 unsigned32 read-only
The destination port of the INA client. Only used if bit 3 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsTransportProtocol 1.3.6.1.2.1.10.146.1.6.3.1.20 integer read-only
The transport protocol used by the INA client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsInaClientSrcMac 1.3.6.1.2.1.10.146.1.6.3.1.21 macaddress read-only
The Ethernet source MAC address of the INA client. Only used if bit 5 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsInaClientDstMac 1.3.6.1.2.1.10.146.1.6.3.1.22 macaddress read-only
The Ethernet destination MAC address of the INA client. Only used if bit 6 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsEthernetProtocol 1.3.6.1.2.1.10.146.1.6.3.1.23 unsigned32 read-only
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfConSesDsControl is set.
                         dvbInaIfConSesDsSessionId 1.3.6.1.2.1.10.146.1.6.3.1.24 unsigned32 read-only
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfConSesDsControl is set.
                 dvbInaIfConHdrSupTable 1.3.6.1.2.1.10.146.1.6.4 no-access
Table contains information about the header suppression for a connection, indexed trough the Connection ID and the Context ID.
                     dvbInaIfConHdrSupEntry 1.3.6.1.2.1.10.146.1.6.4.1 no-access
An entry in the table is automatically generated when a new header suppression starts. Or when a reprovisioning is made. An entry is deleted when the connection is deleted.
                         dvbInaIfConHdrSupContextId 1.3.6.1.2.1.10.146.1.6.4.1.1 integer no-access
The context ID for the header suppression session.
                         dvbInaIfConHdrSupDirection 1.3.6.1.2.1.10.146.1.6.4.1.2 integer no-access
The direction for this the header suppression session. Enumeration: 'downstream': 2, 'upstream': 1.
                         dvbInaIfConHdrSupControl 1.3.6.1.2.1.10.146.1.6.4.1.3 octet string read-only
String of bits that control the use of the header suppression. Each of the first 103 bits, indicates if a byte in the header is suppressed or not. Bit 103 is used as an overall suppression enable. If a mask bit is 0, the matching header byte is suppressed. If bit 103 is set, suppression is performed. Bit 103 is the least significant bit in octet 13. See also dvbInaIfConHdrSupHeader.
                         dvbInaIfConHdrSupGeneration 1.3.6.1.2.1.10.146.1.6.4.1.4 integer32 read-only
The generation number that is attached to the header fields value.
                         dvbInaIfConHdrSupHeaderLength 1.3.6.1.2.1.10.146.1.6.4.1.5 integer32 read-only
The number of usefull bytes in the suppression header. This is the number of the last zero in the dvbInaIfConHdrSupControl.
                         dvbInaIfConHdrSupHeader 1.3.6.1.2.1.10.146.1.6.4.1.6 octet string read-only
The header used for header suppression. Both fixed and changing fields together. Only the first dvbInaIfConHdrSupHeaderLength is used.
             dvbInaIfReprov 1.3.6.1.2.1.10.146.1.7
                 dvbInaIfReprovSrcNiuTable 1.3.6.1.2.1.10.146.1.7.1 no-access
The table describes information created on INA 1 for a NIU that is about to be reprovisioned.
                     dvbInaIfReprovSrcNiuEntry 1.3.6.1.2.1.10.146.1.7.1.1 no-access
An entry in the table is created by the manager when a NIU is about to be reprovisioned. When the reprovisioning is done and the NIU entry is deleted after dvbInaIfNiuLifetime this entry will be deleted too.
                         dvbInaIfReprovSrcNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.7.1.1.1 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfReprovSrcNiuCommand 1.3.6.1.2.1.10.146.1.7.1.1.2 integer read-only
Controls the reprovisioning on INA 1. When set to reprovStart the actual reporvisioning on INA 1 is initiated with a Reprovisioning Message to the NIU. Everything must be prepared for the reprovisioning when this is done. When read the response will always be reprovIdle. Enumeration: 'reprovStart': 2, 'reprovIdle': 1.
                         dvbInaIfReprovSrcNiuDsChFrequency 1.3.6.1.2.1.10.146.1.7.1.1.3 downfrequency read-only
The centre of the new downstream frequency when the NIU is reprovisioned to INA 2.
                         dvbInaIfReprovSrcNiuDsChSymbolRate 1.3.6.1.2.1.10.146.1.7.1.1.4 downstreamsymbolrate read-only
Specifies the new symbol rate for the Downstream channel when the NIU is reprovisioned.
                         dvbInaIfReprovSrcNiuDsChModulation 1.3.6.1.2.1.10.146.1.7.1.1.5 modulation read-only
Specifies the new modulation for the Downstream channel when the NIU is reprovisioned.
                         dvbInaIfReprovSrcNiuDsChType 1.3.6.1.2.1.10.146.1.7.1.1.6 integer read-only
Specifies if the new Downstream channel is inband or out-of-band when the NIU is reprovisioned. Enumeration: 'ib': 1, 'oob': 2.
                         dvbInaIfReprovSrcNiuUsChFrequency 1.3.6.1.2.1.10.146.1.7.1.1.7 upfrequency read-only
Specifies the new upstream channel frequency in Hz when the NIU is reprovisoned.
                         dvbInaIfReprovSrcNiuUsChSymbolRate 1.3.6.1.2.1.10.146.1.7.1.1.8 upstreamsymbolrate read-only
Specifies the new upstream channel symbol rate when the NIU is reprovisoned.
                         dvbInaIfReprovSrcNiuUsChModulation 1.3.6.1.2.1.10.146.1.7.1.1.9 modulation read-only
Specifies the new upstream modulation when the NIU is reprovisoned.
                         dvbInaIfReprovSrcNiuUsChId 1.3.6.1.2.1.10.146.1.7.1.1.10 integer32 read-only
Specifies the new logical channel number associated with the upstream channel when the NIU is reprovisioned.
                 dvbInaIfReprovDstNiuTable 1.3.6.1.2.1.10.146.1.7.2 no-access
The table describes information created on INA 2 for a NIU that is about to be reprovisioned.
                     dvbInaIfReprovDstNiuEntry 1.3.6.1.2.1.10.146.1.7.2.1 no-access
An entry in the table is created by the manager when a NIU is about to be reprovisioned. When the reprovisioning is done and the NIU signs on to INA 2 the information is transfered to the NIU table and the entry in this table is deleted automatically.
                         dvbInaIfReprovDstNiuMacAddress 1.3.6.1.2.1.10.146.1.7.2.1.1 macaddress no-access
A 48-bit value representing the unique MAC address of the NIU to be reprovisioned. This is the index of the table.
                         dvbInaIfReprovDstNiuRowAccessStatus 1.3.6.1.2.1.10.146.1.7.2.1.2 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfReprovDstNiuCommand 1.3.6.1.2.1.10.146.1.7.2.1.3 integer read-only
Controls the reprovisioning on INA 2. When set to reprovPrepare INA 2 will generate the necessary information that needs to be transferred back to INA 1. This includes: New Connection ID's New PID for each connection New downstream VPI/VCI New upstream VPI/VCI New upstream number Furthermore new fixed rate parameters are calculated if one of the new connections are fixed rate. All settings needed to calculate these new parameters must be given before reprovPrepare is set. When set to reprovReceiveNiu this is an indication to INA 2 that the NIU is expected to sign-on now. When read the response will always be reprovIdle. Enumeration: 'reprovIdle': 1, 'reprovPrepare': 2, 'reprovReceiveNi': 3.
                         dvbInaIfReprovDstNiuDownIfIndex 1.3.6.1.2.1.10.146.1.7.2.1.4 interfaceindexorzero read-only
Specifies the IfIndex of the downstream channel on which the NIU is tuned after the reprovisioning.
                         dvbInaIfReprovDstNiuUpIfIndex 1.3.6.1.2.1.10.146.1.7.2.1.5 interfaceindexorzero read-only
Specifies the IfIndex of the upstream channel that is used by the NIU after the reprovisioning.
                         dvbInaIfReprovDstNiuLifetime 1.3.6.1.2.1.10.146.1.7.2.1.6 unsigned32 read-only
Defines how long time after the NIU signs off, the NIU entry is removed from the NIU table. An infinite(0) value would mean that the values are stored at least until the next reboot of the INA
                 dvbInaIfReprovSrcConTable 1.3.6.1.2.1.10.146.1.7.3 no-access
Contains information about DVB-RC MAC connections on INA 1 that is about to be reprovisioned.
                     dvbInaIfReprovSrcConEntry 1.3.6.1.2.1.10.146.1.7.3.1 no-access
The entries in the table are created by the manager when a NIU on INA 1 is about to be reprovisioned. After the NIU is reprovisoned the entries are automatically deleted when the corresponding NUI entry are deleted after dvbInaIfNiuLifetime.
                         dvbInaIfReprovSrcConRowAccessStatus 1.3.6.1.2.1.10.146.1.7.3.1.1 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfReprovSrcConConnectionIdNew 1.3.6.1.2.1.10.146.1.7.3.1.2 unsigned32 read-only
Specifies the new value for the connection identifier to be used for this connection after the reprovisioning. The management system must get this value from INA 2.
                         dvbInaIfReprovSrcConPID 1.3.6.1.2.1.10.146.1.7.3.1.3 unsigned32 read-only
Specifies the new MPEG PID of the elementary stream that carries the data after the reprovisioning.
                         dvbInaIfReprovSrcConDsVc 1.3.6.1.2.1.10.146.1.7.3.1.4 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission after reprovisioning. The management system must get this value from INA 2.
                         dvbInaIfReprovSrcConUsVc 1.3.6.1.2.1.10.146.1.7.3.1.5 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission after reprovisioning. The management system must get this value from INA 2.
                 dvbInaIfReprovDstConTable 1.3.6.1.2.1.10.146.1.7.4 no-access
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
                     dvbInaIfReprovDstConEntry 1.3.6.1.2.1.10.146.1.7.4.1 no-access
The entries in the table are created by the manager when a NIU is about to be reprovisioned to INA 2. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
                         dvbInaIfReprovDstConConnectionIdOld 1.3.6.1.2.1.10.146.1.7.4.1.1 unsigned32 no-access
Specifies the old value for the connection identifier that is used on INA 1. The management system must get this value from INA 1.
                         dvbInaIfReprovDstConRowAccessStatus 1.3.6.1.2.1.10.146.1.7.4.1.2 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfReprovDstConConnectionIdNew 1.3.6.1.2.1.10.146.1.7.4.1.3 unsigned32 read-only
Specifies the new value for the connection identifier that is used on INA 2. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
                         dvbInaIfReprovDstConConnectionType 1.3.6.1.2.1.10.146.1.7.4.1.4 bits read-only
Specifies the kind of connection: fixed rate, contention based, or reservation based. This parameter can be set to a value that is an OR of the following bits: 'conTypeFixedRate(0)' 'conTypeContention(1)' 'conTypeReservation(2)' Default this object is 'conTypeContention(1)'. Bits: 'conTypeReservation': 2, 'conTypeContention': 1, 'conTypeFixedRate': 0.
                         dvbInaIfReprovDstConEncapsulation 1.3.6.1.2.1.10.146.1.7.4.1.5 integer read-only
This object indicates the type of encapsulation provided on this connection. This object can have one of the following values: 'directIp(1)', 'ethernetMacBridging(2)', or 'ppp(3)'. By default this parameter is set to 'directIp(1)'. Enumeration: 'directIp': 1, 'ppp': 3, 'ethernetMacBridging': 2.
                         dvbInaIfReprovDstConAtmDownstreamVCC 1.3.6.1.2.1.10.146.1.7.4.1.6 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for downstream OoB transmission. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
                         dvbInaIfReprovDstConAtmUpstreamVCC 1.3.6.1.2.1.10.146.1.7.4.1.7 unsigned32 read-only
ATM concatenated VPI and VCI Virtual Path Identifiers that is used for upstream transmission. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
                         dvbInaIfReprovDstConFilterMACAddress 1.3.6.1.2.1.10.146.1.7.4.1.8 macaddress read-only
Specifies the 'soft' MPEG MPE MAC address used to filter the data out of the downstream IB transmission. This is found in the Downstream_Multiprotocol_CBD substructure in the Connect Message.
                         dvbInaIfReprovDstConPID 1.3.6.1.2.1.10.146.1.7.4.1.9 unsigned32 read-only
Specifies the MPEG PID of the elementary stream that carries the data. INA 2 creates this value when dvbInaIfReprovDstNiuCommand is set to reprovPrepare.
                         dvbInaIfReprovDstConMaxContentionMsgLen 1.3.6.1.2.1.10.146.1.7.4.1.10 integer read-only
The Maximum_Contention_Access_Message_Length in the Connect Message. This is the maximum length of a message that may be transmitted using contention access. Any message greater than this should use reservation access. The default value should be dvbInaIfMacMaxContentionMsgLen.
                         dvbInaIfReprovDstConMaxReservationMsgLen 1.3.6.1.2.1.10.146.1.7.4.1.11 integer read-only
This is the maximum length of a message that may be transmitted using a single reservation access. Any message greater than this should be transmitted by making multiple reservation requests. The default value should be dvbInaIfMacMaxReservationMsgLen.
                         dvbInaIfReprovDstConAuxFlags 1.3.6.1.2.1.10.146.1.7.4.1.12 integer read-only
The Connection_Control_Field_Aux from the Connect Message Structure. This is used to indicate if the Priority, Downstream flowspec and Session binding objects are used for the connection.
                 dvbInaIfReprovDstConSesTable 1.3.6.1.2.1.10.146.1.7.5 no-access
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
                     dvbInaIfReprovDstConSesEntry 1.3.6.1.2.1.10.146.1.7.5.1 no-access
The entries in the table are created automatically when an entry in the dvbInaIfReprovDstConTable is created and the INA support session binding. You must always create an entry in the dvbInaIfReprovDstConTable first and this will automatically create an entry in the dvbInaIfReprovDstConSesTable table. After the NIU has signed on to INA 2, the information in the table are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
                         dvbInaIfReprovDstConSesUsControl 1.3.6.1.2.1.10.146.1.7.5.1.1 unsigned32 read-write
Control which fields of the upstream session binding parameters that are used.
                         dvbInaIfReprovDstConSesUsNiuClientSrcIpType 1.3.6.1.2.1.10.146.1.7.5.1.2 inetaddresstype read-write
The type of the IP source address of the NIU client.
                         dvbInaIfReprovDstConSesUsNiuClientSrcIp 1.3.6.1.2.1.10.146.1.7.5.1.3 inetaddress read-write
The IP source address of the NIU client. Only used if bit 0 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsNiuClientDstIpType 1.3.6.1.2.1.10.146.1.7.5.1.4 inetaddresstype read-write
The type of the IP destination address of the NIU client.
                         dvbInaIfReprovDstConSesUsNiuClientDstIp 1.3.6.1.2.1.10.146.1.7.5.1.5 inetaddress read-write
The IP destination address of the NIU client. Only used if bit 1 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsNiuClientSrcPort 1.3.6.1.2.1.10.146.1.7.5.1.6 unsigned32 read-write
The source port of the NIU client. Only used if bit 2 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsNiuClientDstPort 1.3.6.1.2.1.10.146.1.7.5.1.7 unsigned32 read-write
The destination port of the NIU client. Only used if bit 3 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsTransportProtocol 1.3.6.1.2.1.10.146.1.7.5.1.8 integer read-write
The transport protocol used by the NIU client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsNiuClientSrcMac 1.3.6.1.2.1.10.146.1.7.5.1.9 macaddress read-write
The Ethernet source MAC address of the NIU client. Only used if bit 5 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsNiuClientDstMac 1.3.6.1.2.1.10.146.1.7.5.1.10 macaddress read-write
The Ethernet destination MAC address of the NIU client. Only used if bit 6 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsEthernetProtocol 1.3.6.1.2.1.10.146.1.7.5.1.11 unsigned32 read-write
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesUsSessionId 1.3.6.1.2.1.10.146.1.7.5.1.12 unsigned32 read-write
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfReprovDstConSesUsControl is set.
                         dvbInaIfReprovDstConSesDsControl 1.3.6.1.2.1.10.146.1.7.5.1.13 unsigned32 read-write
Control which fields of the downstream session binding parameters that are used.
                         dvbInaIfReprovDstConSesDsInaClientSrcIpType 1.3.6.1.2.1.10.146.1.7.5.1.14 inetaddresstype read-write
The type of the IP source address of the INA client.
                         dvbInaIfReprovDstConSesDsInaClientSrcIp 1.3.6.1.2.1.10.146.1.7.5.1.15 inetaddress read-write
The IP source address of the INA client. Only used if bit 0 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsInaClientDstIpType 1.3.6.1.2.1.10.146.1.7.5.1.16 inetaddresstype read-write
The type of the IP destination address of the INA client.
                         dvbInaIfReprovDstConSesDsInaClientDstIp 1.3.6.1.2.1.10.146.1.7.5.1.17 inetaddress read-write
The IP destination address of the INA client. Only used if bit 1 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsInaClientSrcPort 1.3.6.1.2.1.10.146.1.7.5.1.18 unsigned32 read-write
The source port of the INA client. Only used if bit 2 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsInaClientDstPort 1.3.6.1.2.1.10.146.1.7.5.1.19 unsigned32 read-write
The destination port of the INA client. Only used if bit 3 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsTransportProtocol 1.3.6.1.2.1.10.146.1.7.5.1.20 integer read-write
The transport protocol used by the INA client (UDP/TCP). This is the 8-bit protocol field in the IP header. Only used if bit 4 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsInaClientSrcMac 1.3.6.1.2.1.10.146.1.7.5.1.21 macaddress read-write
The Ethernet source MAC address of the INA client. Only used if bit 5 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsInaClientDstMac 1.3.6.1.2.1.10.146.1.7.5.1.22 macaddress read-write
The Ethernet destination MAC address of the INA client. Only used if bit 6 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsEthernetProtocol 1.3.6.1.2.1.10.146.1.7.5.1.23 unsigned32 read-write
The ethernet protocol, as described in the ethernet header. This is the type field in the Ethernet protocol header. Only used if bit 7 of dvbInaIfReprovDstConSesDsControl is set.
                         dvbInaIfReprovDstConSesDsSessionId 1.3.6.1.2.1.10.146.1.7.5.1.24 unsigned32 read-write
The session_Id, as defined for PPPoE protocol. Only used if bit 8 of dvbInaIfReprovDstConSesDsControl is set.
                 dvbInaIfReprovDstConHdrSupTable 1.3.6.1.2.1.10.146.1.7.6 no-access
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
                     dvbInaIfReprovDstConHdrSupEntry 1.3.6.1.2.1.10.146.1.7.6.1 no-access
The entries in the table are created by the manager when a NIU is about to be reprovisioned to INA 2. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
                         dvbInaIfReprovDstConHdrSupContextId 1.3.6.1.2.1.10.146.1.7.6.1.1 integer no-access
The context ID for the header suppression session.
                         dvbInaIfReprovDstConHdrSupDirection 1.3.6.1.2.1.10.146.1.7.6.1.2 integer no-access
The direction for this the header suppression session. Enumeration: 'downstream': 2, 'upstream': 1.
                         dvbInaIfReprovDstConHdrSupRowAccessStatus 1.3.6.1.2.1.10.146.1.7.6.1.3 rowstatus read-only
Controls and reflects the status of this row in this table.
                         dvbInaIfReprovDstConHdrSupControl 1.3.6.1.2.1.10.146.1.7.6.1.4 octet string read-only
String of bits that control the use of the header suppression. Each of the fisrt 103 bits, indicates if a byte in the header is suppressed or not. Bit 103 is used as an overall suppression enable. If a mask bit is 0, the matching header byte is suppressed. If bit 103 is set, suppression is performed. Bit 103 is the least significant bit in octet 13. See also dvbInaIfReprovDstConHdrSupHeader.
                         dvbInaIfReprovDstConHdrSupGeneration 1.3.6.1.2.1.10.146.1.7.6.1.5 integer32 read-only
The generation number that is attached to the header fields value.
                         dvbInaIfReprovDstConHdrSupHeaderLength 1.3.6.1.2.1.10.146.1.7.6.1.6 integer32 read-only
The number of usefull bytes in the suppression header. This is the number of the last zero in the dvbInaIfReprovDstConHdrSupControl.
                         dvbInaIfReprovDstConHdrSupHeader 1.3.6.1.2.1.10.146.1.7.6.1.7 octet string read-only
The header used for header suppression. Both fixed and changing fields together. Only the first dvbInaIfReprovDstConHdrSupHeaderLength is used.
                 dvbInaIfReprovDstConQosTable 1.3.6.1.2.1.10.146.1.7.7 no-access
Contains information about DVB-RC MAC connections that is about to be reprovisioned to INA 2.
                     dvbInaIfReprovDstConQosEntry 1.3.6.1.2.1.10.146.1.7.7.1 no-access
The entries in the table are created automatically when an entry in the dvbInaIfReprovDstConTable is created and the INA support QoS settings. After the NIU has signed on to INA 2, the information in the tables are used to create entries in the normal connection tables. When the entries in the normal tables are made the entries in the reprovisioning table are automatically deleted.
                         dvbInaIfReprovDstConQosPriority 1.3.6.1.2.1.10.146.1.7.7.1.1 integer read-only
The priority of the connection. Connections with low priority field value can be reprovisioned in order to accommodate the requirements of connections with high priority field. Standard data flow applications 0-79 Applications with QoS requirements 80-200 High priority applications 201-255
                         dvbInaIfReprovDstConQosDsReqMaxPacketSize 1.3.6.1.2.1.10.146.1.7.7.1.2 unsigned32 read-only
A downstream QoS parameter. Defines the requested maximum packet size in the downstream. The parameter can be set either by the managment system, or by the INA according to the NIU resource request. The packet size includes propriety protocols header, transport protocol (UDP/TCP) header, and the IP header. The packet size does not include the Ethernet header.
                         dvbInaIfReprovDstConQosDsReqBitrate 1.3.6.1.2.1.10.146.1.7.7.1.3 unsigned32 read-only
A downstream QoS parameter. Defines requested average bit rate in the downstream.
                         dvbInaIfReprovDstConQosDsReqJitter 1.3.6.1.2.1.10.146.1.7.7.1.4 integer read-only
A downstream QoS parameter. Defines the requested maximum allowed jitter in the downstream.
                         dvbInaIfReprovDstConQosUsReqBw 1.3.6.1.2.1.10.146.1.7.7.1.5 unsigned32 read-only
An upstream QoS parameter. The requested bandwidth for the upstream.
                         dvbInaIfReprovDstConQosUsReqMaxDistSlots 1.3.6.1.2.1.10.146.1.7.7.1.6 unsigned32 read-only
An upstream QoS parameter. The requested maximum distance between slots for the upstream.
                         dvbInaIfReprovDstConQosUsReqFrameLength 1.3.6.1.2.1.10.146.1.7.7.1.7 unsigned32 read-only
An upstream QoS parameter. The requested frame length for the upstream.
                         dvbInaIfReprovDstConQosUsReqFixedRateMethod 1.3.6.1.2.1.10.146.1.7.7.1.8 integer read-only
An upstream QoS parameter. Request a specific fixed rate slot assignment method to be used. If cyclic then cyclic assignment is used. If slotList then the slot list method is used. Enumeration: 'slotList': 2, 'cyclic': 1.
         dvbInaIfMIBConform 1.3.6.1.2.1.10.146.2
             dvbInaIfCompliances 1.3.6.1.2.1.10.146.2.1
                 dvbInaIfCompliance 1.3.6.1.2.1.10.146.2.1.1
The compliance statement for EuroModem INAs which implement the DVB-CABLE-INA-IF-MIB MIB. An implementation only has to support IPv4 addresses to be compliant.
             dvbInaIfGroups 1.3.6.1.2.1.10.146.2.2
                 dvbInaIfMacGroup 1.3.6.1.2.1.10.146.2.2.1
A collection of objects providing capabilities and statistics for the MAC layer.
                 dvbInaIfProvisionGroup 1.3.6.1.2.1.10.146.2.2.2
                 dvbInaIfDsChGroup 1.3.6.1.2.1.10.146.2.2.3
                 dvbInaIfUsChGroup 1.3.6.1.2.1.10.146.2.2.4
                 dvbInaIfNiuGroup 1.3.6.1.2.1.10.146.2.2.5
                 dvbInaIfConnectionGroup 1.3.6.1.2.1.10.146.2.2.6
                 dvbInaIfConQosGroup 1.3.6.1.2.1.10.146.2.2.7
                 dvbInaIfConSesGroup 1.3.6.1.2.1.10.146.2.2.8
                 dvbInaIfConHdrSupGroup 1.3.6.1.2.1.10.146.2.2.9
                 dvbInaIfReprovSrcNiuGroup 1.3.6.1.2.1.10.146.2.2.10
                 dvbInaIfReprovDstNiuGroup 1.3.6.1.2.1.10.146.2.2.11
                 dvbInaIfReprovSrcConGroup 1.3.6.1.2.1.10.146.2.2.12
                 dvbInaIfReprovDstConGroup 1.3.6.1.2.1.10.146.2.2.13
                 dvbInaIfReprovDstConSesGroup 1.3.6.1.2.1.10.146.2.2.14
                 dvbInaIfReprovDstConHdrSupGroup 1.3.6.1.2.1.10.146.2.2.15
                 dvbInaIfReprovDstConQosGroup 1.3.6.1.2.1.10.146.2.2.16