DOCS-CABLE-DEVICE-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: DOCS-CABLE-DEVICE-TRAP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DOCS-IF-EXT-MIB, DOCS-IF-MIB, SNMPv2-TC, DOCS-CABLE-DEVICE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     docsDevTraps 1.3.6.1.2.1.69.2.1
         docsDevTrapControl 1.3.6.1.2.1.69.2.1.1
             docsDevCmTrapControl 1.3.6.1.2.1.69.2.1.1.1 bits read-write
The object is used to enable CM traps. From left to right, the set bit indicates the corresponding CM trap is enabled. For example, if the first bit is set, then docsDevCmInitTLVUnknownTrap is enabled. If it is zero, the trap is disabled. Bits: 'cmDCCRspFailTrap': 14, 'cmDynServReqFailTrap': 1, 'cmSwUpgradeCVCTrap': 11, 'cmDynServAckFailTrap': 3, 'cmSwUpgradeSuccessTrap': 10, 'cmDynamicSATrap': 6, 'cmInitTLVUnknownTrap': 0, 'cmDCCAckFailTrap': 15, 'cmBpiInitTrap': 4, 'cmDynServRspFailTrap': 2, 'cmSwUpgradeInitTrap': 8, 'cmDCCReqFailTrap': 13, 'cmSwUpgradeFailTrap': 9, 'cmBPKMTrap': 5, 'cmDHCPFailTrap': 7, 'cmTODFailTrap': 12.
             docsDevCmtsTrapControl 1.3.6.1.2.1.69.2.1.1.2 bits read-write
The object is used to enable CMTS traps. From left to right, the set bit indicates the corresponding CMTS trap is enabled. For example, if the first bit is set, then docsDevCmtsInitRegRspFailTrap is enabled. If it is zero, the trap is disabled. Bits: 'cmtsDynServRspFailTrap': 4, 'cmtsInitRegRspFailTrap': 1, 'cmtsDCCRspFailTrap': 10, 'cmtsInitRegAckFailTrap': 2, 'cmtsBPKMTrap': 7, 'cmtsDCCReqFailTrap': 9, 'cmtsDynServAckFailTrap': 5, 'cmtsDCCAckFailTrap': 11, 'cmtsBpiInitTrap': 6, 'cmtsInitRegReqFailTrap': 0, 'cmtsDynServReqFailTrap': 3, 'cmtsDynamicSATrap': 8.
         docsDevTrapConformance 1.3.6.1.2.1.69.2.1.2
             docsDevCmTraps 1.3.6.1.2.1.69.2.1.2.0
                 docsDevCmInitTLVUnknownTrap 1.3.6.1.2.1.69.2.1.2.0.1
Event due to detection of unknown TLV during the TLV parsing process. The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docsDevEventTable. The docsIfDocsisCapability and docsIfDocsisOperMode indicate the DOCSIS version information. The ifPhysAddress value is the MAC address of the cable interface of this cable modem. The docsIfCmCmtsAddress specifies the MAC address of the CMTS to which the CM is connected (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM). This part of information is uniformed across all CM traps.
                 docsDevCmDynServReqFailTrap 1.3.6.1.2.1.69.2.1.2.0.2
An event to report the failure of a dynamic service request happened during the dynamic services process.
                 docsDevCmDynServRspFailTrap 1.3.6.1.2.1.69.2.1.2.0.3
An event to report the failure of a dynamic service response happened during the dynamic services process.
                 docsDevCmDynServAckFailTrap 1.3.6.1.2.1.69.2.1.2.0.4
An event to report the failure of a dynamic service acknowledgement happened during the dynamic services process.
                 docsDevCmBpiInitTrap 1.3.6.1.2.1.69.2.1.2.0.5
An event to report the failure of a BPI initialization attempt happened during the registration process.
                 docsDevCmBPKMTrap 1.3.6.1.2.1.69.2.1.2.0.6
An event to report the failure of a BPKM operation.
                 docsDevCmDynamicSATrap 1.3.6.1.2.1.69.2.1.2.0.7
An event to report the failure of a dynamic security association operation.
                 docsDevCmDHCPFailTrap 1.3.6.1.2.1.69.2.1.2.0.8
An event to report the failure of a DHCP server. The value of docsDevServerDhcp is the IP address of the DHCP server.
                 docsDevCmSwUpgradeInitTrap 1.3.6.1.2.1.69.2.1.2.0.9
An event to report a software upgrade initiated event. The values of docsDevSwFilename, and docsDevSwServer indicate the software image name and the server IP address the image is from.
                 docsDevCmSwUpgradeFailTrap 1.3.6.1.2.1.69.2.1.2.0.10
An event to report the failure of a software upgrade attempt. The values of docsDevSwFilename, and docsDevSwServer indicate the software image name and the server IP address the image is from.
                 docsDevCmSwUpgradeSuccessTrap 1.3.6.1.2.1.69.2.1.2.0.11
An event to report the Software upgrade success event. The values of docsDevSwFilename, and docsDevSwServer indicate the software image name and the server IP address the image is from.
                 docsDevCmSwUpgradeCVCFailTrap 1.3.6.1.2.1.69.2.1.2.0.12
An event to report the failure of the verification of code file happened during a secure software upgrade attempt.
                 docsDevCmTODFailTrap 1.3.6.1.2.1.69.2.1.2.0.13
An event to report the failure of a time of day server. The value of docsDevServerTime indicates the server IP address.
                 docsDevCmDCCReqFailTrap 1.3.6.1.2.1.69.2.1.2.0.14
An event to report the failure of a dynamic channel change request happened during the dynamic channel change process in the CM side.
                 docsDevCmDCCRspFailTrap 1.3.6.1.2.1.69.2.1.2.0.15
An event to report the failure of a dynamic channel change response happened during the dynamic channel change process in the CM side.
                 docsDevCmDCCAckFailTrap 1.3.6.1.2.1.69.2.1.2.0.16
An event to report the failure of a dynamic channel change acknowledgement happened during the dynamic channel change process in the CM side.
             docsDevTrapGroups 1.3.6.1.2.1.69.2.1.2.1
                 docsDevCmTrapControlGroup 1.3.6.1.2.1.69.2.1.2.1.1
CM must support docsDevCmTrapControl.
                 docsDevCmNotificationGroup 1.3.6.1.2.1.69.2.1.2.1.2
A collection of CM notifications providing device status and control.
                 docsDevCmtsTrapControlGroup 1.3.6.1.2.1.69.2.1.2.1.3
CMTS must support docsDevCmtsTrapControl.
                 docsDevCmtsNotificationGroup 1.3.6.1.2.1.69.2.1.2.1.4
A collection of CMTS notifications providing device status and control.
             docsDevTrapCompliances 1.3.6.1.2.1.69.2.1.2.2
                 docsDevCmTrapCompliance 1.3.6.1.2.1.69.2.1.2.2.1
The compliance statement for Cable Modem Traps and Control.
                 docsDevCmtsTrapCompliance 1.3.6.1.2.1.69.2.1.2.2.2
The compliance statement for MCNS Cable Modems and Cable Modem Termination Systems.
             docsDevCmtsTraps 1.3.6.1.2.1.69.2.1.3.0
                 docsDevCmtsInitRegReqFailTrap 1.3.6.1.2.1.69.2.1.3.0.1
An event to report the failure of a registration request from CM happened during the CM initialization process and detected in the CMTS side. The values of docsDevEvLevel, docsDevId, and DocsDevEvText are from the entry which logs this event in the docsDevEventTable. DocsIfCmtsCmStatusDocsisMode and docsIfCmtsCmStatusMacAddress indicate the docsis version and the MAC address of the requesting CM. docsIfDocsisCapability and ifPhysAddress indicate the docsis version of the CMTS and the MAC address of the CMTS (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM) cable card connected to the CM. This part of information is uniformed across all CMTS traps.
                 docsDevCmtsInitRegRspFailTrap 1.3.6.1.2.1.69.2.1.3.0.2
An event to report the failure of a registration response happened during the CM initialization process and detected in the CMTS side.
                 docsDevCmtsInitRegAckFailTrap 1.3.6.1.2.1.69.2.1.3.0.3
An event to report the failure of a registration acknowledgement from CM happened during the CM initialization process and detected in the CMTS side.
                 docsDevCmtsDynServReqFailTrap 1.3.6.1.2.1.69.2.1.3.0.4
An event to report the failure of a dynamic service request happened during the dynamic services process and detected in the CMTS side.
                 docsDevCmtsDynServRspFailTrap 1.3.6.1.2.1.69.2.1.3.0.5
An event to report the failure of a dynamic service response happened during the dynamic services process and detected in the CMTS side.
                 docsDevCmtsDynServAckFailTrap 1.3.6.1.2.1.69.2.1.3.0.6
An event to report the failure of a dynamic service acknowledgement happened during the dynamic services process and detected in the CMTS side.
                 docsDevCmtsBpiInitTrap 1.3.6.1.2.1.69.2.1.3.0.7
An event to report the failure of a BPI initialization attempt happened during the CM registration process and detected in the CMTS side.
                 docsDevCmtsBPKMTrap 1.3.6.1.2.1.69.2.1.3.0.8
An event to report the failure of a BPKM operation which is detected in the CMTS side.
                 docsDevCmtsDynamicSATrap 1.3.6.1.2.1.69.2.1.3.0.9
An event to report the failure of a dynamic security association operation which is detected in the CMTS side.
                 docsDevCmtsDCCReqFailTrap 1.3.6.1.2.1.69.2.1.3.0.10
An event to report the failure of a dynamic channel change request happened during the dynamic channel change process in the CM side and detected in the CMTS side.
                 docsDevCmtsDCCRspFailTrap 1.3.6.1.2.1.69.2.1.3.0.11
An event to report the failure of a dynamic channel change response happened during the dynamic channel change process in the CMTS side.
                 docsDevCmtsDCCAckFailTrap 1.3.6.1.2.1.69.2.1.3.0.12
An event to report the failure of a dynamic channel change acknowledgement happened during the dynamic channel change process in the CMTS side.
 docsDevTrapMIB 1.3.6.1.2.1.69.10
CABLE DEVICE TRAP MIB is an extension of the CABLE DEVICE MIB defined in RFC2669. It defines various trap objects for both cable modem and cable modem termination system. There are two groups of SNMP notification objects are defined. One group is for notifying cable modem events and one group for notifying cable modem termination system events. Common to all CM notification objects (traps) is that in their OBJECTS statements, A CM trap contains information about the event priority, the event Id, the event message body, the CM DOCSIS capability, the CM DOCSIS register registration status, the cable interface MAC address of the cable modem and the cable card MAC address of the CMTS to which the modem is connected to. These objects are docsDevEvLevel, docsDevId, docsDevEvText, docsIfDocsisCapability, docsIfDocsisOperMode, ifPhysAddress and docsIfCmCmtsAddress. The values of docsDevEvLevel, docsDevId, and docsDevEvText are from the entry which logs this event in the docsDevEventTable, which is defined in DOCS-CABLE-DEVICE-MIB of RFC2669. The docsIfDocsisCapability and docsIfDocsisOperMode are defined in DOCS-IF-EXT-MIB. The ifPhysAddress value is the MAC address of the cable interface of this cable modem. The docsIfCmCmtsAddress specifies the MAC address of the CMTS (if there is a cable card/interface in the CMTS, then it is actually the cable interface interface MAC address to which the CM is connected). Individual CM trap may contain additional objects to provide necessary information. Common to all CMTS notification objects (traps) is that in their OBJECTS statements, A CMTS trap contains information about the event priority, the event Id, the event message body, the connected CM DOCSIS register status, the CM cable interface MAC address, the CMTS DOCSIS register status and the CMTS MAC address. These objects are docsDevEvLevel, docsDevId, docsDevEvText, docsIfCmtsCmStatusDocsisMode, docsIfCmtsCmStatusMacAddress, docsIfDocsisCapability, and ifPhysAddress. The values of docsDevEvLevel, docsDevId, and docsDevEvText are similar to what in CM traps. The values of docsIfCmtsCmStatusDocsisMode and docsIfCmtsCmStatusMacAddress are from the docsIfCmtsCmStatusEntry (defined in DOCS-IF-MIB) corresponding to a conneced CM. The docsIfDocsisCapability indicates the CMTS DOCSIS capability. The ifPhysAddress value is the CMTS MAC address (if there is a cable card/interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM).