DOCS-BPI2-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: DOCS-BPI2-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SNMPv2-TC-v1, INET-ADDRESS-MIB, DOCS-IF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 docsBpi2MIB 1.3.6.1.2.1.10.127.6
     docsBpi2MIBObjects 1.3.6.1.2.1.10.127.6.1
         docsBpi2CmObjects 1.3.6.1.2.1.10.127.6.1.1
             docsBpi2CmBaseTable 1.3.6.1.2.1.10.127.6.1.1.1 no-access
This table describes the basic and authorization related Baseline Privacy Plus attributes of each CM MAC interface.
                 docsBpi2CmBaseEntry 1.3.6.1.2.1.10.127.6.1.1.1.1 no-access
Each entry contains objects describing attributes of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
                     docsBpi2CmPrivacyEnable 1.3.6.1.2.1.10.127.6.1.1.1.1.1 truthvalue read-only
This object identifies whether this CM is provisioned to run Baseline Privacy Plus.
                     docsBpi2CmPublicKey 1.3.6.1.2.1.10.127.6.1.1.1.1.2 octet string read-only
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1) [10], corresponding to the public key of the CM. The 74, 106, 140, 204, and 270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024 bit, 1536 bit, and 2048 public moduli respectively.
                     docsBpi2CmAuthState 1.3.6.1.2.1.10.127.6.1.1.1.1.3 integer read-only
The value of this object is the state of the CM authorization FSM. The start state indicates that FSM is in its initial state. Enumeration: 'reauthWait': 4, 'silent': 6, 'authRejectWait': 5, 'authWait': 2, 'start': 1, 'authorized': 3.
                     docsBpi2CmAuthKeySequenceNumber 1.3.6.1.2.1.10.127.6.1.1.1.1.4 integer read-only
The value of this object is the most recent authorization key sequence number for this FSM.
                     docsBpi2CmAuthExpiresOld 1.3.6.1.2.1.10.127.6.1.1.1.1.5 dateandtime read-only
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM.
                     docsBpi2CmAuthExpiresNew 1.3.6.1.2.1.10.127.6.1.1.1.1.6 dateandtime read-only
The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.
                     docsBpi2CmAuthReset 1.3.6.1.2.1.10.127.6.1.1.1.1.7 truthvalue read-write
Setting this object to TRUE generates a Reauthorize event in the authorization FSM. Reading this object always returns FALSE.
                     docsBpi2CmAuthGraceTime 1.3.6.1.2.1.10.127.6.1.1.1.1.8 integer read-only
The value of this object is the grace time for an authorization key. A CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the authorization key actually expires.
                     docsBpi2CmTEKGraceTime 1.3.6.1.2.1.10.127.6.1.1.1.1.9 integer read-only
The value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to acquire a new TEK beginning TEK GraceTime seconds before the expiration of the most recent TEK.
                     docsBpi2CmAuthWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.10 integer read-only
The value of this object is the Authorize Wait Timeout.
                     docsBpi2CmReauthWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.11 integer read-only
The value of this object is the Reauthorize Wait Timeout in seconds.
                     docsBpi2CmOpWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.12 integer read-only
The value of this object is the Operational Wait Timeout in seconds.
                     docsBpi2CmRekeyWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.13 integer read-only
The value of this object is the Rekey Wait Timeout in seconds.
                     docsBpi2CmAuthRejectWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.14 integer read-only
The value of this object is the Authorization Reject Wait Timeout in seconds.
                     docsBpi2CmSAMapWaitTimeout 1.3.6.1.2.1.10.127.6.1.1.1.1.15 integer read-only
The value of this object is the retransmission interval, in seconds, of SA Map Requests from the MAP Wait state.
                     docsBpi2CmSAMapMaxRetries 1.3.6.1.2.1.10.127.6.1.1.1.1.16 integer read-only
The value of this object is the maximum number of Map Request retries allowed.
                     docsBpi2CmAuthentInfos 1.3.6.1.2.1.10.127.6.1.1.1.1.17 counter read-only
The value of this object is the count of times the CM has transmitted an Authentication Information message.
                     docsBpi2CmAuthRequests 1.3.6.1.2.1.10.127.6.1.1.1.1.18 counter read-only
The value of this object is the count of times the CM has transmitted an Authorization Request message.
                     docsBpi2CmAuthReplies 1.3.6.1.2.1.10.127.6.1.1.1.1.19 counter read-only
The value of this object is the count of times the CM has received an Authorization Reply message.
                     docsBpi2CmAuthRejects 1.3.6.1.2.1.10.127.6.1.1.1.1.20 counter read-only
The value of this object is the count of times the CM has received an Authorization Reject message.
                     docsBpi2CmAuthInvalids 1.3.6.1.2.1.10.127.6.1.1.1.1.21 counter read-only
The value of this object is the count of times the CM has received an Authorization Invalid message.
                     docsBpi2CmAuthRejectErrorCode 1.3.6.1.2.1.10.127.6.1.1.1.1.22 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been received since reboot. Enumeration: 'none': 1, 'unauthorizedSaid': 4, 'unknown': 2, 'timeOfDayNotAcquired': 11, 'permanentAuthorizationFailure': 8, 'unauthorizedCm': 3.
                     docsBpi2CmAuthRejectErrorString 1.3.6.1.2.1.10.127.6.1.1.1.1.23 snmpadminstring read-only
The value of this object is the Display-String in most recent Authorization Reject message received by the CM. This is a zero length string if no Authorization Reject message has been received since reboot.
                     docsBpi2CmAuthInvalidErrorCode 1.3.6.1.2.1.10.127.6.1.1.1.1.24 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been received since reboot. Enumeration: 'none': 1, 'unknown': 2, 'invalidKeySequence': 6, 'unsolicited': 5, 'unauthorizedCm': 3, 'keyRequestAuthenticationFailure': 7.
                     docsBpi2CmAuthInvalidErrorString 1.3.6.1.2.1.10.127.6.1.1.1.1.25 snmpadminstring read-only
The value of this object is the Display-String in most recent Authorization Invalid message received by the CM. This is a zero length string if no Authorization Invalid message has been received since reboot.
             docsBpi2CmTEKTable 1.3.6.1.2.1.10.127.6.1.1.2 no-access
This table describes the attributes of each CM Traffic Encryption Key(TEK) association. The CM maintains (no more than) one TEK association per SAID per CM MAC interface.
                 docsBpi2CmTEKEntry 1.3.6.1.2.1.10.127.6.1.1.2.1 no-access
Each entry contains objects describing the TEK association attributes of one SAID. The CM MUST create one entry per SAID, regardless of whether the SAID was obtained from a Registration Response message, from an Authorization Reply message, or from any dynamic SAID establishment mechanisms.
                     docsBpi2CmTEKSAId 1.3.6.1.2.1.10.127.6.1.1.2.1.1 integer no-access
The value of this object is the DOCSIS Security Association ID (SAID).
                     docsBpi2CmTEKSAType 1.3.6.1.2.1.10.127.6.1.1.2.1.2 integer read-only
The value of this object is the type of security association. Enumeration: 'dynamic': 3, 'none': 0, 'static': 2, 'primary': 1.
                     docsBpi2CmTEKDataEncryptAlg 1.3.6.1.2.1.10.127.6.1.1.2.1.3 integer read-only
The value of this object is the data encryption algorithm being utilized. Enumeration: 'none': 0, 'des56CbcMode': 1, 'des40CbcMode': 2.
                     docsBpi2CmTEKDataAuthentAlg 1.3.6.1.2.1.10.127.6.1.1.2.1.4 integer read-only
The value of this object is the data authentication algorithm being utilized. Enumeration: 'none': 0.
                     docsBpi2CmTEKState 1.3.6.1.2.1.10.127.6.1.1.2.1.5 integer read-only
The value of this object is the state of the indicated TEK FSM. The start(1) state indicates that FSM is in its initial state. Enumeration: 'rekeyReauthWait': 6, 'opWait': 2, 'operational': 4, 'start': 1, 'rekeyWait': 5, 'opReauthWait': 3.
                     docsBpi2CmTEKKeySequenceNumber 1.3.6.1.2.1.10.127.6.1.1.2.1.6 integer read-only
The value of this object is the most recent TEK key sequence number for this TEK FSM.
                     docsBpi2CmTEKExpiresOld 1.3.6.1.2.1.10.127.6.1.1.2.1.7 dateandtime read-only
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
                     docsBpi2CmTEKExpiresNew 1.3.6.1.2.1.10.127.6.1.1.2.1.8 dateandtime read-only
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
                     docsBpi2CmTEKKeyRequests 1.3.6.1.2.1.10.127.6.1.1.2.1.9 counter read-only
The value of this object is the count of times the CM has transmitted a Key Request message.
                     docsBpi2CmTEKKeyReplies 1.3.6.1.2.1.10.127.6.1.1.2.1.10 counter read-only
The value of this object is the count of times the CM has received a Key Reply message, including a message whose authentication failed.
                     docsBpi2CmTEKKeyRejects 1.3.6.1.2.1.10.127.6.1.1.2.1.11 counter read-only
The value of this object is the count of times the CM has received a Key Reject message, including a message whose authentication failed.
                     docsBpi2CmTEKInvalids 1.3.6.1.2.1.10.127.6.1.1.2.1.12 counter read-only
The value of this object is the count of times the CM has received a TEK Invalid message, including a message whose authentication failed.
                     docsBpi2CmTEKAuthPends 1.3.6.1.2.1.10.127.6.1.1.2.1.13 counter read-only
The value of this object is the count of times an Authorization Pending (Auth Pend) event occurred in this FSM.
                     docsBpi2CmTEKKeyRejectErrorCode 1.3.6.1.2.1.10.127.6.1.1.2.1.14 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent Key Reject message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'unauthorizedSaid': 4.
                     docsBpi2CmTEKKeyRejectErrorString 1.3.6.1.2.1.10.127.6.1.1.2.1.15 snmpadminstring read-only
The value of this object is the Display-String in most recent Key Reject message received by the CM. This is a zero length string if no Key Reject message has been received since reboot.
                     docsBpi2CmTEKInvalidErrorCode 1.3.6.1.2.1.10.127.6.1.1.2.1.16 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent TEK Invalid message received by the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'invalidKeySequence': 6.
                     docsBpi2CmTEKInvalidErrorString 1.3.6.1.2.1.10.127.6.1.1.2.1.17 snmpadminstring read-only
The value of this object is the Display-String in most recent TEK Invalid message received by the CM. This is a zero length string if no TEK Invalid message has been received since reboot.
             docsBpi2CmMulticastObjects 1.3.6.1.2.1.10.127.6.1.1.3
                 docsBpi2CmIpMulticastMapTable 1.3.6.1.2.1.10.127.6.1.1.3.1 no-access
This table maps multicast IP addresses to SAIDs. It is intended to map multicast IP addresses associated with SA MAP Request messages.
                     docsBpi2CmIpMulticastMapEntry 1.3.6.1.2.1.10.127.6.1.1.3.1.1 no-access
Each entry contains objects describing the mapping of one multicast IP address to one SAID, as well as associated state, message counters, and error information.
                         docsBpi2CmIpMulticastIndex 1.3.6.1.2.1.10.127.6.1.1.3.1.1.1 integer no-access
The index of this row.
                         docsBpi2CmIpMulticastAddressType 1.3.6.1.2.1.10.127.6.1.1.3.1.1.2 inetaddresstype read-only
The type of internet address for docsBpi2CmIpMulticastAddress.
                         docsBpi2CmIpMulticastAddress 1.3.6.1.2.1.10.127.6.1.1.3.1.1.3 inetaddress read-only
This object represents the IP multicast address to be mapped.
                         docsBpi2CmIpMulticastSAId 1.3.6.1.2.1.10.127.6.1.1.3.1.1.4 integer read-only
This object represents the SAID to which the IP multicast address has been mapped. If no SA Map Reply has been received for the IP address, this object should have the value 0.
                         docsBpi2CmIpMulticastSAMapState 1.3.6.1.2.1.10.127.6.1.1.3.1.1.5 integer read-only
The value of this object is the state of the SA Mapping FSM for this IP. Enumeration: 'start': 1, 'mapWait': 2, 'mapped': 3.
                         docsBpi2CmIpMulticastSAMapRequests 1.3.6.1.2.1.10.127.6.1.1.3.1.1.6 counter read-only
The value of this object is the count of times the CM has transmitted an SA Map Request message for this IP.
                         docsBpi2CmIpMulticastSAMapReplies 1.3.6.1.2.1.10.127.6.1.1.3.1.1.7 counter read-only
The value of this object is the count of times the CM has received an SA Map Reply message for this IP.
                         docsBpi2CmIpMulticastSAMapRejects 1.3.6.1.2.1.10.127.6.1.1.3.1.1.8 counter read-only
The value of this object is the count of times the CM has received an SA MAP Reject message for this IP.
                         docsBpi2CmIpMulticastSAMapRejectErrorCode 1.3.6.1.2.1.10.127.6.1.1.3.1.1.9 integer read-only
The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It has value unknown(2) if the last Error-Code value was 0, and none(1) if no SA MAP Reject message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'noAuthForRequestedDSFlow': 9, 'dsFlowNotMappedToSA': 10.
                         docsBpi2CmIpMulticastSAMapRejectErrorString 1.3.6.1.2.1.10.127.6.1.1.3.1.1.10 snmpadminstring read-only
The value of this object is the Display-String in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since reboot.
             docsBpi2CmCertObjects 1.3.6.1.2.1.10.127.6.1.1.4
                 docsBpi2CmDeviceCertTable 1.3.6.1.2.1.10.127.6.1.1.4.1 no-access
This table describes the Baseline Privacy Plus device certificates for each CM MAC interface.
                     docsBpi2CmDeviceCertEntry 1.3.6.1.2.1.10.127.6.1.1.4.1.1 no-access
Each entry contains the device certificates of one CM MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
                         docsBpi2CmDeviceCmCert 1.3.6.1.2.1.10.127.6.1.1.4.1.1.1 x509certificate read-write
The X509 DER-encoded cable modem certificate. Note: This object can be set only when the value is the null string. Once the object contains the certificate, its access MUST be read-only.
                         docsBpi2CmDeviceManufCert 1.3.6.1.2.1.10.127.6.1.1.4.1.1.2 x509certificate read-only
The X509 DER-encoded manufacturer certificate which signed the cable modem certificate.
             docsBpi2CmCryptoSuiteTable 1.3.6.1.2.1.10.127.6.1.1.5 no-access
This table describes the Baseline Privacy Plus cryptographic suite capabilites for each CM MAC interface.
                 docsBpi2CmCryptoSuiteEntry 1.3.6.1.2.1.10.127.6.1.1.5.1 no-access
Each entry contains a cryptographic suite pair which this CM MAC supports.
                     docsBpi2CmCryptoSuiteIndex 1.3.6.1.2.1.10.127.6.1.1.5.1.1 integer no-access
The index for a cryptographic suite row.
                     docsBpi2CmCryptoSuiteDataEncryptAlg 1.3.6.1.2.1.10.127.6.1.1.5.1.2 integer read-only
The value of this object is the data encryption algorithm for this cryptographic suite capability. Enumeration: 'none': 0, 'des56CbcMode': 1, 'des40CbcMode': 2.
                     docsBpi2CmCryptoSuiteDataAuthentAlg 1.3.6.1.2.1.10.127.6.1.1.5.1.3 integer read-only
The value of this object is the data authentication algorithm for this cryptographic suite capability. Enumeration: 'none': 0.
         docsBpi2CmtsObjects 1.3.6.1.2.1.10.127.6.1.2
             docsBpi2CmtsBaseTable 1.3.6.1.2.1.10.127.6.1.2.1 no-access
This table describes the basic Baseline Privacy attributes of each CMTS MAC interface.
                 docsBpi2CmtsBaseEntry 1.3.6.1.2.1.10.127.6.1.2.1.1 no-access
Each entry contains objects describing attributes of one CMTS MAC interface. An entry in this table exists for each ifEntry with an ifType of docsCableMaclayer(127).
                     docsBpi2CmtsDefaultAuthLifetime 1.3.6.1.2.1.10.127.6.1.2.1.1.1 integer read-write
The value of this object is the default lifetime, in seconds, the CMTS assigns to a new authorization key.
                     docsBpi2CmtsDefaultTEKLifetime 1.3.6.1.2.1.10.127.6.1.2.1.1.2 integer read-write
The value of this object is the default lifetime, in seconds, the CMTS assigns to a new Traffic Encryption Key (TEK).
                     docsBpi2CmtsDefaultSelfSignedManufCertTrust 1.3.6.1.2.1.10.127.6.1.2.1.1.3 integer read-write
This object determines the default trust of all (new) self-signed manufacturer certificates obtained after setting the object. Enumeration: 'untrusted': 2, 'trusted': 1.
                     docsBpi2CmtsCheckCertValidityPeriods 1.3.6.1.2.1.10.127.6.1.2.1.1.4 truthvalue read-write
Setting this object to TRUE causes all certificates obtained thereafter to have their validity periods (and their chain's validity periods) checked against the current time of day. A FALSE setting will cause all certificates obtained thereafter to not have their validity periods (nor their chain's validity periods) checked against the current time of day.
                     docsBpi2CmtsAuthentInfos 1.3.6.1.2.1.10.127.6.1.2.1.1.5 counter read-only
The value of this object is the count of times the CMTS has received an Authentication Information message from any CM.
                     docsBpi2CmtsAuthRequests 1.3.6.1.2.1.10.127.6.1.2.1.1.6 counter read-only
The value of this object is the count of times the CMTS has received an Authorization Request message from any CM.
                     docsBpi2CmtsAuthReplies 1.3.6.1.2.1.10.127.6.1.2.1.1.7 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Reply message to any CM.
                     docsBpi2CmtsAuthRejects 1.3.6.1.2.1.10.127.6.1.2.1.1.8 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Reject message to any CM.
                     docsBpi2CmtsAuthInvalids 1.3.6.1.2.1.10.127.6.1.2.1.1.9 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to any CM.
                     docsBpi2CmtsSAMapRequests 1.3.6.1.2.1.10.127.6.1.2.1.1.10 counter read-only
The value of this object is the count of times the CMTS has received an SA Map Request message from any CM.
                     docsBpi2CmtsSAMapReplies 1.3.6.1.2.1.10.127.6.1.2.1.1.11 counter read-only
The value of this object is the count of times the CMTS has transmitted an SA Map Reply message to any CM.
                     docsBpi2CmtsSAMapRejects 1.3.6.1.2.1.10.127.6.1.2.1.1.12 counter read-only
The value of this object is the count of times the CMTS has transmitted an SA Map Reject message to any CM.
             docsBpi2CmtsAuthTable 1.3.6.1.2.1.10.127.6.1.2.2 no-access
This table describes the attributes of each CM authorization association. The CMTS maintains one authorization association with each Baseline Privacy-enabled CM on each CMTS MAC interface.
                 docsBpi2CmtsAuthEntry 1.3.6.1.2.1.10.127.6.1.2.2.1 no-access
Each entry contains objects describing attributes of one authorization association. The CMTS MUST create one entry per CM per MAC interface, based on the receipt of an Authorization Request message, and MUST not delete the entry before the CM authorization permanently expires.
                     docsBpi2CmtsAuthCmMacAddress 1.3.6.1.2.1.10.127.6.1.2.2.1.1 macaddress no-access
The value of this object is the physical address of the CM to which the authorization association applies.
                     docsBpi2CmtsAuthCmBpiVersion 1.3.6.1.2.1.10.127.6.1.2.2.1.2 integer read-only
The value of this object is the version of Baseline Privacy for which this CM has registered. Enumeration: 'bpi': 0, 'bpiPlus': 1.
                     docsBpi2CmtsAuthCmPublicKey 1.3.6.1.2.1.10.127.6.1.2.2.1.3 octet string read-only
The value of this object is a DER-encoded RSAPublicKey ASN.1 type string, as defined in the RSA Encryption Standard (PKCS #1) [10], corresponding to the public key of the CM. The 74, 106, 140, 204, and 270 byte key encoding lengths correspond to 512 bit, 768 bit, 1024 bit, 1536 bit, and 2048 public moduli respectively. This is a zero-length string if the CMTS does not retain the public key.
                     docsBpi2CmtsAuthCmKeySequenceNumber 1.3.6.1.2.1.10.127.6.1.2.2.1.4 integer read-only
The value of this object is the most recent authorization key sequence number for this CM.
                     docsBpi2CmtsAuthCmExpiresOld 1.3.6.1.2.1.10.127.6.1.2.2.1.5 dateandtime read-only
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent authorization key for this FSM. If this FSM has only one authorization key, then the value is the time of activation of this FSM. Note: For CMs running in BPI mode, implementation of this object is optional and MAY vary.
                     docsBpi2CmtsAuthCmExpiresNew 1.3.6.1.2.1.10.127.6.1.2.2.1.6 dateandtime read-only
The value of this object is the actual clock time for expiration of the most recent authorization key for this FSM.
                     docsBpi2CmtsAuthCmLifetime 1.3.6.1.2.1.10.127.6.1.2.2.1.7 integer read-write
The value of this object is the lifetime, in seconds, the CMTS assigns to an authorization key for this CM.
                     docsBpi2CmtsAuthCmGraceTime 1.3.6.1.2.1.10.127.6.1.2.2.1.8 integer read-only
The value of this object is the grace time for the authorization key in seconds. The CM is expected to start trying to get a new authorization key beginning AuthGraceTime seconds before the authorization key actually expires. Note: Tracking this value is optional on certain CMTS implementations.
                     docsBpi2CmtsAuthCmReset 1.3.6.1.2.1.10.127.6.1.2.2.1.9 integer read-write
Setting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key(s), but not to transmit an Authorization Invalid message nor to invalidate unicast TEKs. Setting this object to sendAuthInvalid(3) causes the CMTS to invalidate the current CM authorization key(s), and to transmit an Authorization Invalid message to the CM, but not to invalidate unicast TEKs. Setting this object to invalidateTeks(4) causes the CMTS to invalidate the current CM authorization key(s), to transmit an Authorization Invalid message to the CM, and to invalidate all unicast TEKs associated with this CM authorization. Reading this object returns the most-recently-set value of this object, or returns noResetRequested(1) if the object has not been set since the last CMTS reboot. Enumeration: 'sendAuthInvalid': 3, 'invalidateTeks': 4, 'noResetRequested': 1, 'invalidateAuth': 2.
                     docsBpi2CmtsAuthCmInfos 1.3.6.1.2.1.10.127.6.1.2.2.1.10 counter read-only
The value of this object is the count of times the CMTS has received an Authentication Information message from this CM.
                     docsBpi2CmtsAuthCmRequests 1.3.6.1.2.1.10.127.6.1.2.2.1.11 counter read-only
The value of this object is the count of times the CMTS has received an Authorization Request message from this CM.
                     docsBpi2CmtsAuthCmReplies 1.3.6.1.2.1.10.127.6.1.2.2.1.12 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Reply message to this CM.
                     docsBpi2CmtsAuthCmRejects 1.3.6.1.2.1.10.127.6.1.2.2.1.13 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Reject message to this CM.
                     docsBpi2CmtsAuthCmInvalids 1.3.6.1.2.1.10.127.6.1.2.2.1.14 counter read-only
The value of this object is the count of times the CMTS has transmitted an Authorization Invalid message to this CM.
                     docsBpi2CmtsAuthRejectErrorCode 1.3.6.1.2.1.10.127.6.1.2.2.1.15 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent Authorization Reject message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Reject message has been transmitted to the CM. Enumeration: 'none': 1, 'unauthorizedSaid': 4, 'unknown': 2, 'timeOfDayNotAcquired': 11, 'permanentAuthorizationFailure': 8, 'unauthorizedCm': 3.
                     docsBpi2CmtsAuthRejectErrorString 1.3.6.1.2.1.10.127.6.1.2.2.1.16 snmpadminstring read-only
The value of this object is the Display-String in most recent Authorization Reject message transmitted to the CM. This is a zero length string if no Authorization Reject message has been transmitted to the CM.
                     docsBpi2CmtsAuthInvalidErrorCode 1.3.6.1.2.1.10.127.6.1.2.2.1.17 integer read-only
The value of this object is the enumerated description of the Error-Code in most recent Authorization Invalid message transmitted to the CM. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Authorization Invalid message has been transmitted to the CM. Enumeration: 'none': 1, 'unknown': 2, 'invalidKeySequence': 6, 'unsolicited': 5, 'unauthorizedCm': 3, 'keyRequestAuthenticationFailure': 7.
                     docsBpi2CmtsAuthInvalidErrorString 1.3.6.1.2.1.10.127.6.1.2.2.1.18 snmpadminstring read-only
The value of this object is the Display-String in most recent Authorization Invalid message transmitted to the CM. This is a zero length string if no Authorization Invalid message has been transmitted to the CM.
                     docsBpi2CmtsAuthPrimarySAId 1.3.6.1.2.1.10.127.6.1.2.2.1.19 integer read-only
The value of this object is the Primary Security Association identifier.
                     docsBpi2CmtsAuthBpkmCmCertValid 1.3.6.1.2.1.10.127.6.1.2.2.1.20 integer read-only
Contains the reason why a CM's certificate is deemed valid or invalid. Return unknown if the CM is running BPI mode. ValidCmChained means the certificate is valid because it chains to a valid certificate. ValidCmTrusted means the certificate is valid because it has been provisioned (in the docsBpi2CmtsProvisionedCmCert table) to be trusted. InvalidCmUntrusted means the certificate is invalid because it has been provisioned (in the docsBpi2CmtsProvisionedCmCert table) to be untrusted. InvalidCAUntrusted means the certificate is invalid because it chains to an untrusted certificate. InvalidCmOther and InvalidCAOther refer to errors in parsing, validity periods, etc, which are attributable to the cm certificate or its chain respectively; additional information may be found in docsBpi2AuthRejectErrorString for these types of errors. Enumeration: 'invalidCAOther': 6, 'unknown': 0, 'invalidCmUntrusted': 3, 'validCmChained': 1, 'invalidCAUntrusted': 4, 'invalidCmOther': 5, 'validCmTrusted': 2.
                     docsBpi2CmtsAuthBpkmCmCert 1.3.6.1.2.1.10.127.6.1.2.2.1.21 x509certificate read-only
The X509 CM Certificate sent as part of a BPKM Authorization Request. Note: The NULL string must be returned if the entire certificate is not retained in the CMTS.
             docsBpi2CmtsTEKTable 1.3.6.1.2.1.10.127.6.1.2.3 no-access
This table describes the attributes of each Traffic Encryption Key (TEK) association. The CMTS maintains one TEK association per SAID on each CMTS MAC interface.
                 docsBpi2CmtsTEKEntry 1.3.6.1.2.1.10.127.6.1.2.3.1 no-access
Each entry contains objects describing attributes of one TEK association on a particular CMTS MAC interface. The CMTS MUST create one entry per SAID per MAC interface, based on the receipt of a Key Request message, and MUST not delete the entry before the CM authorization for the SAID permanently expires.
                     docsBpi2CmtsTEKSAId 1.3.6.1.2.1.10.127.6.1.2.3.1.1 integer no-access
The value of this object is the DOCSIS Security Association ID (SAID).
                     docsBpi2CmtsTEKSAType 1.3.6.1.2.1.10.127.6.1.2.3.1.2 integer read-only
The value of this object is the type of security association. Dynamic does not apply to CMs running in BPI mode. Enumeration: 'dynamic': 3, 'none': 0, 'static': 2, 'primary': 1.
                     docsBpi2CmtsTEKDataEncryptAlg 1.3.6.1.2.1.10.127.6.1.2.3.1.3 integer read-only
The value of this object is the data encryption algorithm being utilized. Enumeration: 'none': 0, 'des56CbcMode': 1, 'des40CbcMode': 2.
                     docsBpi2CmtsTEKDataAuthentAlg 1.3.6.1.2.1.10.127.6.1.2.3.1.4 integer read-only
The value of this object is the data authentication algorithm being utilized. Enumeration: 'none': 0.
                     docsBpi2CmtsTEKLifetime 1.3.6.1.2.1.10.127.6.1.2.3.1.5 integer read-write
The value of this object is the lifetime, in seconds, the CMTS assigns to keys for this TEK association.
                     docsBpi2CmtsTEKGraceTime 1.3.6.1.2.1.10.127.6.1.2.3.1.6 integer read-only
The value of this object is the grace time for the TEK in seconds. The CM is expected to start trying to acquire a new TEK beginning TEK GraceTime seconds before the TEK actually expires. Note: The value of this object is vendor specific for multicast TEKs.
                     docsBpi2CmtsTEKKeySequenceNumber 1.3.6.1.2.1.10.127.6.1.2.3.1.7 integer read-only
The value of this object is the most recent TEK key sequence number for this SAID.
                     docsBpi2CmtsTEKExpiresOld 1.3.6.1.2.1.10.127.6.1.2.3.1.8 dateandtime read-only
The value of this object is the actual clock time for expiration of the immediate predecessor of the most recent TEK for this FSM. If this FSM has only one TEK, then the value is the time of activation of this FSM.
                     docsBpi2CmtsTEKExpiresNew 1.3.6.1.2.1.10.127.6.1.2.3.1.9 dateandtime read-only
The value of this object is the actual clock time for expiration of the most recent TEK for this FSM.
                     docsBpi2CmtsTEKReset 1.3.6.1.2.1.10.127.6.1.2.3.1.10 truthvalue read-write
Setting this object to TRUE causes the CMTS to invalidate the current active TEK(s) (plural due to key transition periods), and to generate a new TEK for the associated SAID; the CMTS MAY also generate an unsolicited TEK Invalid message, to optimize the TEK synchronization between the CMTS and the CM. Reading this object always returns FALSE.
                     docsBpi2CmtsKeyRequests 1.3.6.1.2.1.10.127.6.1.2.3.1.11 counter read-only
The value of this object is the count of times the CMTS has received a Key Request message.
                     docsBpi2CmtsKeyReplies 1.3.6.1.2.1.10.127.6.1.2.3.1.12 counter read-only
The value of this object is the count of times the CMTS has transmitted a Key Reply message.
                     docsBpi2CmtsKeyRejects 1.3.6.1.2.1.10.127.6.1.2.3.1.13 counter read-only
The value of this object is the count of times the CMTS has transmitted a Key Reject message.
                     docsBpi2CmtsTEKInvalids 1.3.6.1.2.1.10.127.6.1.2.3.1.14 counter read-only
The value of this object is the count of times the CMTS has transmitted a TEK Invalid message.
                     docsBpi2CmtsKeyRejectErrorCode 1.3.6.1.2.1.10.127.6.1.2.3.1.15 integer read-only
The value of this object is the enumerated description of the Error-Code in the most recent Key Reject message sent in response to a Key Request for this SAID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no Key Reject message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'unauthorizedSaid': 4.
                     docsBpi2CmtsKeyRejectErrorString 1.3.6.1.2.1.10.127.6.1.2.3.1.16 snmpadminstring read-only
The value of this object is the Display-String in the most recent Key Reject message sent in response to a Key Request for this SAID. This is a zero length string if no Key Reject message has been received since reboot.
                     docsBpi2CmtsTEKInvalidErrorCode 1.3.6.1.2.1.10.127.6.1.2.3.1.17 integer read-only
The value of this object is the enumerated description of the Error-Code in the most recent TEK Invalid message sent in association with this SAID. This has value unknown(2) if the last Error-Code value was 0, and none(1) if no TEK Invalid message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'invalidKeySequence': 6.
                     docsBpi2CmtsTEKInvalidErrorString 1.3.6.1.2.1.10.127.6.1.2.3.1.18 snmpadminstring read-only
The value of this object is the Display-String in the most recent TEK Invalid message sent in association with this SAID. This is a zero length string if no TEK Invalid message has been received since reboot.
             docsBpi2CmtsMulticastObjects 1.3.6.1.2.1.10.127.6.1.2.4
                 docsBpi2CmtsIpMulticastMapTable 1.3.6.1.2.1.10.127.6.1.2.4.1 no-access
This table maps multicast IP addresses to SAIDs.
                     docsBpi2CmtsIpMulticastMapEntry 1.3.6.1.2.1.10.127.6.1.2.4.1.1 no-access
Each entry contains objects describing the mapping of a set of multicast IP address and mask to one SAID, as well as associated message counters and error information.
                         docsBpi2CmtsIpMulticastIndex 1.3.6.1.2.1.10.127.6.1.2.4.1.1.1 integer no-access
The index of this row.
                         docsBpi2CmtsIpMulticastAddressType 1.3.6.1.2.1.10.127.6.1.2.4.1.1.2 inetaddresstype read-write
The type of internet address for docsBpi2CmtsIpMulticastAddress.
                         docsBpi2CmtsIpMulticastAddress 1.3.6.1.2.1.10.127.6.1.2.4.1.1.3 inetaddress read-write
This object represents the IP multicast address to be mapped, in conjunction with docsBpi2CmtsIpMulticastMask.
                         docsBpi2CmtsIpMulticastMaskType 1.3.6.1.2.1.10.127.6.1.2.4.1.1.4 inetaddresstype read-write
The type of internet address for docsBpi2CmtsIpMulticastMask.
                         docsBpi2CmtsIpMulticastMask 1.3.6.1.2.1.10.127.6.1.2.4.1.1.5 inetaddress read-write
This object represents the IP multicast address mask for this row. An IP multicast address matches this row if it is equivalent to the logical AND of docsBpi2CmtsIpMulticastAddr with docsBpi2CmtsIpMulticastMask.
                         docsBpi2CmtsIpMulticastSAId 1.3.6.1.2.1.10.127.6.1.2.4.1.1.6 integer read-write
This object represents the multicast SAID to be used in this IP multicast address mapping entry.
                         docsBpi2CmtsIpMulticastSAType 1.3.6.1.2.1.10.127.6.1.2.4.1.1.7 integer read-write
The value of this object is the type of security association. Dynamic does not apply to CMs running in BPI mode. Enumeration: 'dynamic': 3, 'none': 0, 'static': 2, 'primary': 1.
                         docsBpi2CmtsIpMulticastDataEncryptAlg 1.3.6.1.2.1.10.127.6.1.2.4.1.1.8 integer read-write
The value of this object is the data encryption algorithm being utilized. Enumeration: 'none': 0, 'des56CbcMode': 1, 'des40CbcMode': 2.
                         docsBpi2CmtsIpMulticastDataAuthentAlg 1.3.6.1.2.1.10.127.6.1.2.4.1.1.9 integer read-write
The value of this object is the data authentication algorithm being utilized. Enumeration: 'none': 0.
                         docsBpi2CmtsIpMulticastSAMapRequests 1.3.6.1.2.1.10.127.6.1.2.4.1.1.10 counter read-only
The value of this object is the count of times the CMTS has received an SA Map Request message for this IP.
                         docsBpi2CmtsIpMulticastSAMapReplies 1.3.6.1.2.1.10.127.6.1.2.4.1.1.11 counter read-only
The value of this object is the count of times the CMTS has transmitted an SA Map Reply message for this IP.
                         docsBpi2CmtsIpMulticastSAMapRejects 1.3.6.1.2.1.10.127.6.1.2.4.1.1.12 counter read-only
The value of this object is the count of times the CMTS has transmitted an SA Map Reject message for this IP.
                         docsBpi2CmtsIpMulticastSAMapRejectErrorCode 1.3.6.1.2.1.10.127.6.1.2.4.1.1.13 integer read-only
The value of this object is the enumerated description of the Error-Code in the most recent SA Map Reject message sent in response to a SA Map Request for this IP. It has value unknown(2) if the last Error-Code value was 0, and none(1) if no SA MAP Reject message has been received since reboot. Enumeration: 'unknown': 2, 'none': 1, 'noAuthForRequestedDSFlow': 9, 'dsFlowNotMappedToSA': 10.
                         docsBpi2CmtsIpMulticastSAMapRejectErrorString 1.3.6.1.2.1.10.127.6.1.2.4.1.1.14 snmpadminstring read-only
The value of this object is the Display-String in the most recent SA Map Reject message sent in response to an SA Map Request for this IP. It is a zero length string if no SA Map Reject message has been received since reboot.
                         docsBpi2CmtsIpMulticastMapControl 1.3.6.1.2.1.10.127.6.1.2.4.1.1.15 rowstatus read-write
This object controls and reflects the IP multicast address mapping entry. There is no restriction on the ability to change values in this row while the row is active. Inactive rows need not be timed out.
                 docsBpi2CmtsMulticastAuthTable 1.3.6.1.2.1.10.127.6.1.2.4.2 no-access
This table describes the multicast SAID authorization for each CM on each CMTS MAC interface.
                     docsBpi2CmtsMulticastAuthEntry 1.3.6.1.2.1.10.127.6.1.2.4.2.1 no-access
Each entry contains objects describing the key authorization of one cable modem for one multicast SAID for one CMTS MAC interface.
                         docsBpi2CmtsMulticastAuthSAId 1.3.6.1.2.1.10.127.6.1.2.4.2.1.1 integer no-access
This object represents the multicast SAID for authorization.
                         docsBpi2CmtsMulticastAuthCmMacAddress 1.3.6.1.2.1.10.127.6.1.2.4.2.1.2 macaddress no-access
This object represents the MAC address of the CM to which the multicast SAID authorization applies.
                         docsBpi2CmtsMulticastAuthControl 1.3.6.1.2.1.10.127.6.1.2.4.2.1.3 rowstatus read-write
This object controls and reflects the CM authorization for each multicast SAID. There is no restriction on the ability to change values in this row while the row is active. Inactive rows need not be timed out.
             docsBpi2CmtsCertObjects 1.3.6.1.2.1.10.127.6.1.2.5
                 docsBpi2CmtsProvisionedCmCertTable 1.3.6.1.2.1.10.127.6.1.2.5.1 no-access
A table of CM certificate trust entries provisioned to the CMTS. The trust object for a certificate in this table has an overriding effect on the validity object of a certificate in the authorization table, as long as the entire contents of the two certificates are identical.
                     docsBpi2CmtsProvisionedCmCertEntry 1.3.6.1.2.1.10.127.6.1.2.5.1.1 no-access
An entry in the CMTS' provisioned CM certificate table.
                         docsBpi2CmtsProvisionedCmCertMacAddress 1.3.6.1.2.1.10.127.6.1.2.5.1.1.1 macaddress no-access
The index of this row.
                         docsBpi2CmtsProvisionedCmCertTrust 1.3.6.1.2.1.10.127.6.1.2.5.1.1.2 integer read-write
Trust state for the provisioned CM certificate entry. Note: Setting this object need only override the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur. Enumeration: 'untrusted': 2, 'trusted': 1.
                         docsBpi2CmtsProvisionedCmCertSource 1.3.6.1.2.1.10.127.6.1.2.5.1.1.3 integer read-only
This object indicates how the certificate reached the CMTS. Other means it originated from a source not identified above. Enumeration: 'other': 4, 'snmp': 1, 'configurationFile': 2, 'externalDatabase': 3.
                         docsBpi2CmtsProvisionedCmCertStatus 1.3.6.1.2.1.10.127.6.1.2.5.1.1.4 rowstatus read-write
Standard RowStatus object except: a) if a row has ever been activated, a set to docsBpi2CmtsProvisionedCmCert need not succeed, b) inactive rows need not be timed out.
                         docsBpi2CmtsProvisionedCmCert 1.3.6.1.2.1.10.127.6.1.2.5.1.1.5 x509certificate read-write
An X509 DER-encoded certificate authority certificate. Note: The NULL string must be returned, on reads, if the entire certificate is not retained in the CMTS.
                 docsBpi2CmtsCACertTable 1.3.6.1.2.1.10.127.6.1.2.5.2 no-access
The table of known certificate authority certificates acquired by this device.
                     docsBpi2CmtsCACertEntry 1.3.6.1.2.1.10.127.6.1.2.5.2.1 no-access
A row in the Certificate Authority certificate table.
                         docsBpi2CmtsCACertIndex 1.3.6.1.2.1.10.127.6.1.2.5.2.1.1 integer no-access
The index for this row.
                         docsBpi2CmtsCACertSubject 1.3.6.1.2.1.10.127.6.1.2.5.2.1.2 snmpadminstring read-only
The subject name exactly as it is encoded in the X509 certificate. The organizationName portion of the certificate's subject name must be present. All other fields are optional. Any optional field present must be prepended with CR (carriage return) LF (line feed) ASCII characters. Ordering of fields present must conform to: organizationName CR LF countryName CR LF stateOrProvinceName CR LF localityName CR LF organizationalUnitName CR LF organizationalUnitName= CR LF commonName
                         docsBpi2CmtsCACertIssuer 1.3.6.1.2.1.10.127.6.1.2.5.2.1.3 snmpadminstring read-only
The issuer name exactly as it is encoded in the X509 certificate. The commonName portion of the certificate's issuer name must be present. All other fields are optional. Any optional field present must be prepended with CR (carriage return) LF (line feed) ASCII characters. Ordering of fields present must conform to: commonName CR LF countryName CR LF stateOrProvinceName CR LF localityName CR LF organizationName CR LF organizationalUnitName CR LF organizationalUnitName=
                         docsBpi2CmtsCACertSerialNumber 1.3.6.1.2.1.10.127.6.1.2.5.2.1.4 octet string read-only
This CA certificate's serial number represented as an octet string.
                         docsBpi2CmtsCACertTrust 1.3.6.1.2.1.10.127.6.1.2.5.2.1.5 integer read-write
This object controls the trust status of this certificate. Root certificates must be given root trust; manufacturer certificates must not be given root trust. Trust on root certificates must not change. Note: Setting this object need only affect the validity of CM certificates sent in future authorization requests; instantaneous effect need not occur. Enumeration: 'untrusted': 2, 'root': 4, 'trusted': 1, 'chained': 3.
                         docsBpi2CmtsCACertSource 1.3.6.1.2.1.10.127.6.1.2.5.2.1.6 integer read-only
This object indicates how the certificate reached the CMTS. Other means it originated from a source not identified above. Enumeration: 'externalDatabase': 3, 'snmp': 1, 'authentInfo': 5, 'compiledIntoCode': 6, 'other': 4, 'configurationFile': 2.
                         docsBpi2CmtsCACertStatus 1.3.6.1.2.1.10.127.6.1.2.5.2.1.7 rowstatus read-write
Standard RowStatus objects except: a) if a row has ever been activated, a set to docsBpi2CmtsCACert need not succeed, b) inactive rows need not be timed out, c) if a row has ever been activated, a destroy setting need not succeed.
                         docsBpi2CmtsCACert 1.3.6.1.2.1.10.127.6.1.2.5.2.1.8 x509certificate read-write
An X509 DER-encoded certificate authority certificate. To help identify certificates, either this object or docsBpi2CmtsCACertThumbprint must be returned by a CMTS for self-signed CA certificates. Note: The NULL string must be returned, on reads, if the entire certificate is not retained in the CMTS.
                         docsBpi2CmtsCACertThumbprint 1.3.6.1.2.1.10.127.6.1.2.5.2.1.9 octet string read-only
The SHA-1 hash of a CA certificate. To help identify certificates, either this object or docsBpi2CmtsCACert must be returned by a CMTS for self-signed CA certificates. Note: The NULL string must be returned if this object is not supported by the CMTS.
         docsBpi2CodeDownloadControl 1.3.6.1.2.1.10.127.6.1.4
             docsBpi2CodeDownloadStatusCode 1.3.6.1.2.1.10.127.6.1.4.1 integer read-only
The value indicates the result of the latest config file CVC verification, SNMP CVC verification, or code file verification. Enumeration: 'codeFileVerified': 5, 'snmpCvcVerified': 3, 'codeFileRejected': 6, 'configFileCvcRejected': 2, 'configFileCvcVerified': 1, 'other': 7, 'snmpCvcRejected': 4.
             docsBpi2CodeDownloadStatusString 1.3.6.1.2.1.10.127.6.1.4.2 snmpadminstring read-only
The value of this object indicates the additional information to the status code. The value will include the error code and error description which will be defined separately.
             docsBpi2CodeMfgOrgName 1.3.6.1.2.1.10.127.6.1.4.3 snmpadminstring read-only
The value of this object is the device manufacturer's organizationName.
             docsBpi2CodeMfgCodeAccessStart 1.3.6.1.2.1.10.127.6.1.4.4 dateandtime read-only
The value of this object is the device manufacturer's current codeAccessStart value referenced to Greenwich Mean Time (GMT).
             docsBpi2CodeMfgCvcAccessStart 1.3.6.1.2.1.10.127.6.1.4.5 dateandtime read-only
The value of this object is the device manufacturer's current cvcAccessStart value referenced to Greenwich Mean Time (GMT).
             docsBpi2CodeCoSignerOrgName 1.3.6.1.2.1.10.127.6.1.4.6 snmpadminstring read-only
The value of this object is the Co-Signer's organizationName. The value is a zero length string if the co-signer is not specified.
             docsBpi2CodeCoSignerCodeAccessStart 1.3.6.1.2.1.10.127.6.1.4.7 dateandtime read-only
The value of this object is the Co-Signer's current codeAccessStart value referenced to Greenwich Mean Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.
             docsBpi2CodeCoSignerCvcAccessStart 1.3.6.1.2.1.10.127.6.1.4.8 dateandtime read-only
The value of this object is the Co-Signer's current cvcAccessStart value referenced to Greenwich Mean Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero length string, the value of this object is meaningless.
             docsBpi2CodeCvcUpdate 1.3.6.1.2.1.10.127.6.1.4.9 x509certificate read-write
Setting a CVC to this object triggers the device to verify the CVC and update the cvcAccessStart value. If the device is not enabled to upgrade codefiles, or the CVC verification fails, the CVC will be rejected. Reading this object always returns the null string.
     docsBpi2Notification 1.3.6.1.2.1.10.127.6.2
     docsBpi2Conformance 1.3.6.1.2.1.10.127.6.3
         docsBpi2Compliances 1.3.6.1.2.1.10.127.6.3.1
             docsBpi2BasicCompliance 1.3.6.1.2.1.10.127.6.3.1.1
         docsBpi2Groups 1.3.6.1.2.1.10.127.6.3.2
             docsBpi2CmGroup 1.3.6.1.2.1.10.127.6.3.2.1
             docsBpi2CmtsGroup 1.3.6.1.2.1.10.127.6.3.2.2
             docsBpi2CodeDownloadGroup 1.3.6.1.2.1.10.127.6.3.2.3
             docsBpi2ObsoleteObjectsGroup 1.3.6.1.2.1.10.127.6.3.2.4