DNOS-POWER-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: DELL INC.


 Home MIB: DNOS-POWER-ETHERNET-MIB
Download as:   
SNMPv2-CONF, POWER-ETHERNET-MIB, SNMPv2-SMI, DELL-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathpowerEthernetMIB 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15
This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet Interfaces and Hub MIB Working Group for managing Power Source Equipment (PSE). The objects in this MIB are intended to provide additional objects for reporting information available to the hardware on this platform which are not represented in the draft MIB.
       agentPethObjects 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1
           agentPethPsePortTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1 no-access
A table of per-port information and configuration objects relating to the power status of each port.
               agentPethPsePortEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1 no-access
A collection of objects providing additional power information and control parameters for the specified port.
                   agentPethPowerLimit 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.1 gauge32 read-write
The configured maximum power this port can provide to an attached device measured in Milliwatts.
                   agentPethOutputPower 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.2 gauge32 read-only
The power this port is supplying to an attached device measured in Milliwatts.
                   agentPethOutputCurrent 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.3 gauge32 read-only
The current this port is supplying to an attached device measured in Milliamps.
                   agentPethOutputVolts 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.4 gauge32 read-only
The voltage this port is supplying to an attached device measured in Volts.
                   agentPethTemperature 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.5 gauge32 read-only
The temperature measured at this port of the PoE Controller. It is measured in degree celcius.
                   agentPethPowerLimitType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.6 integer read-write
Describes or controls the maximum power that a port can deliver A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is equal to the value specified by agentPethPowerLimit Enumeration: 'user': 2, 'dot3af': 1.
                   agentPethHighPowerEnable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.7 truthvalue read-write
true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts
                   agentPethPowerDetectionType 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.8 integer read-write
Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means that IEEE 802.3af 4point detection scheme is used. A value of 4ptdot3afandlegacy(3)means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. A value of 2ptdot3afonly(4) means that IEEE 802.3af 2point detection scheme is used. A value of 2ptdot3afandlegacy(5)means that IEEE 802.3af 2point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. The value 'none' can not be forcibly set by the administrator. Enumeration: 'none': 0, 'fourPtdot3afonly': 2, 'legacy': 1, 'twoPtdot3afonly': 4, 'twoPtdot3afandlegacy': 5, 'fourPtdot3afandlegacy': 3.
                   agentPethFaultStatus 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.9 integer read-only
Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. Enumeration: 'mpsAbsent': 1, 'none': 0, 'short': 2, 'powerDenied': 4, 'overload': 3.
                   agentPethPortReset 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.10 integer read-write
A value of reset(1) is used to move the pse port dot3af state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor. Enumeration: 'reset': 1, 'none': 0.
           agentPethMainPseObjects 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2
               agentPethMainPseTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1 no-access
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
                   agentPethMainPseEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1 no-access
A set of objects that display and control the Main power of a PSE.
                       agentPethMainPseLegacy 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1.1 truthvalue read-write
Enable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected.
           agentPethPseTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3 no-access
A table of per-unit information and configuration objects relating to the power configurtion for the entire pse unit.
               agentPethPseEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1 no-access
A collection of objects providing additional power information and control parameters for the specified pse unit.
                   agentPethPsePowerManagementMode 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.1 integer read-write
Describes or controls the power management algorithm used by the pse to deliver power to the requesting PDsthat a pds. A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is equal to the value specified by agentPethPowerLimit Enumeration: 'static': 2, 'none': 0, 'dynamic': 1.
                   agentPethPseAutoResetEnable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.2 truthvalue read-write
true (1) The PSE port is reset with out administrator intervention whenver a fault condition occurs. false(2) Administrator has to reset the pse port whenver a fault condition is detected.