DMswitch-MIB: View SNMP OID List / Download MIB

VENDOR: TERACOM TELEMATICA LTDA.


 Home MIB: DMswitch-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, Q-BRIDGE-MIB, DATACOM-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dmSwitchMIB 1.3.6.1.4.1.3709.3.5.201
The MIB module for DMswitch.
         dmSwitchMIBObjects 1.3.6.1.4.1.3709.3.5.201.1
             switchMgt 1.3.6.1.4.1.3709.3.5.201.1.1
                 switchNumber 1.3.6.1.4.1.3709.3.5.201.1.1.1 integer32 read-only
The total number of switches present on this system.
                 switchInfoTable 1.3.6.1.4.1.3709.3.5.201.1.1.2 no-access
Table of descriptive and status information about switches in this system.
                     switchInfoEntry 1.3.6.1.4.1.3709.3.5.201.1.1.2.1 no-access
An entry in the table, containing information about a single switch in this system.
                         swUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                         swHardwareVer 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2 integer read-only
Hardware version of the main board.
                         swBootLoaderVer 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3 displaystring read-only
Loader version of the main board.
                         swFirmwareVer 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4 displaystring read-only
Operation code version of the main board.
                         swPortNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5 integer32 read-only
The total port number of this switch (including expansion slot).
                         swPowerStatus 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6 integer read-only
Indicates the switch using internalPower(1), redundantPower(2), internalAndRedundantPower(3) or externalPower(4) Enumeration: 'internalAndRedundantPower': 3, 'internalPower': 1, 'redundantPower': 2, 'externalPower': 4.
                         swRoleInSystem 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7 integer read-only
Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. Enumeration: 'backupMaster': 2, 'slave': 3, 'master': 1.
                         swSerialNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8 displaystring read-only
Serial number of the switch.
                         swProdName 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9 displaystring read-only
                         swProdModelId 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10 integer read-only
Product model identifier. Enumeration: 'eth12gxEth1x10gx': 15, 'eth1x10gx': 13, 'eth12gx': 11, 'eth48gxhseries': 24, 'eth2x10gx': 14, 'eth48gxhseriesII': 69, 'mpu512': 30, 'eth48gteseries': 60, 'eth16gx2x10gx4xstm1hseries': 55, 'eth24gx2xxs': 35, 'mpu192': 9, 'eth20gt4gc2xx': 38, 'eth20gt4gcs': 39, 'eth24gxEth2x10gxhseries': 23, 'dmSwitch2304G1': 2, 'eth10gx4xstm1': 28, 'eth24gxhseriesII': 67, 'eth44gt4gc4xs': 49, 'eth20gt4gc': 37, 'eth48gx': 21, 'eth24gx2xx': 33, 'eth48gt': 17, 'eth44gt4gc4xx': 46, 'eth2x10gxhseriesII': 68, 'eth24gx': 12, 'eth10gx32xe1': 27, 'eth20gt4gc4xs': 66, 'eth48gthseries': 51, 'eth24gthseries': 50, 'eth24gxEth2x10gx': 20, 'eth44gt4gc': 42, 'eth24gx2x10gxhseriesII': 65, 'eth4x10gxeseries': 59, 'eth24gt': 16, 'eth20gt4gc2xxs': 40, 'eth2x10gxhseries': 26, 'eth44gt4gc2xxs': 45, 'eth44gt4gc2xs': 47, 'eth20gx2x10gx32xe1hseries': 54, 'dmSwitch3324F1': 4, 'dmSwitch3324F3': 8, 'dmSwitch3324F2': 6, 'eth44gt4gc2xx': 43, 'eth24gxlseries': 31, 'eth44gt4gc2xss': 48, 'eth24gx4xs': 71, 'eth24gxs': 34, 'eth24gx4xx': 36, 'eth24gx4gx': 32, 'eth4x10gxhseries': 22, 'dmSwitch2204G1': 1, 'eth24gx2x10gxeseries': 57, 'mpu384': 10, 'dmSwitch3224F1': 3, 'dmSwitch3224F2': 5, 'dmSwitch3224F3': 7, 'eth20gt4gc2xss': 52, 'eth20gx32xe1hseries': 53, 'eth20gt4gc4xx': 41, 'eth44gt4gcs': 44, 'eth16gx4xstm1hseries': 56, 'mpu960': 61, 'eth4x10gxhseriesII': 70, 'eth24gxhseries': 25, 'eth44gt4gc2xxsmplsdc': 63, 'eth24gxeseries': 58, 'eth44gt4gc4xxmplsdc': 64, 'eth44gt4gcsmplsdc': 62, 'eth10gx2xstm4': 29.
                         swFirmwareReleaseDate 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11 displaystring read-only
Release date of the firmware.
                         swTemperature 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12 integer read-only
Temperature of the switch.
                         swG704IntfNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13 integer32 read-only
The number of G704 interfaces of this switch.
                         swE1cIntfNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14 integer32 read-only
The number of E1c interfaces of this switch.
                         swBundleIntfNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15 integer32 read-only
The number of Bundle interfaces of this switch.
                         swPtpIntfNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16 integer32 read-only
The number of PTP interfaces of this switch.
                         swSdhIntfNumber 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17 integer32 read-only
The number of SDH interfaces of this switch.
                         swVC4Number 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18 integer32 read-only
The number of VC4 interfaces of this switch.
                         swVC12Number 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19 integer32 read-only
The number of VC12 interfaces of this switch.
                 switchProductId 1.3.6.1.4.1.3709.3.5.201.1.1.3
                     swProdManufacturer 1.3.6.1.4.1.3709.3.5.201.1.1.3.2 displaystring read-only
                     swProdDescription 1.3.6.1.4.1.3709.3.5.201.1.1.3.3 displaystring read-only
                     swProdUrl 1.3.6.1.4.1.3709.3.5.201.1.1.3.5 displaystring read-only
                     swIdentifier 1.3.6.1.4.1.3709.3.5.201.1.1.3.6 integer read-only
A unique identifier of which switch in the chassis is currently being looked at.
                     swVendorId 1.3.6.1.4.1.3709.3.5.201.1.1.3.7 integer read-only
Vendor information. The value 0 indicates a vendor not defined. Enumeration: 'datacom': 1, 'asga': 3, 'none': 6, 'elebra': 7, 'ier': 2, 'infNotAvailable': 2000000255, 'parks': 4, 'osp': 9, 'objectNonexistentInModel': 2000000254, 'digitel': 5.
                 switchIndivPowerTable 1.3.6.1.4.1.3709.3.5.201.1.1.4 no-access
Table about status of individual powers.
                     switchIndivPowerEntry 1.3.6.1.4.1.3709.3.5.201.1.1.4.1 no-access
Table about status of individual powers.
                         swIndivPowerUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1 integer32 read-only
This is defined as swUnitIndex.
                         swIndivPowerIndex 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2 integer read-only
1 means internal power. 2 means external power.
                         swIndivPowerStatus 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3 integer read-only
notPresent(3) means not present. green(2) means up. red(1) means down. Enumeration: 'notPresent': 3, 'green': 2, 'red': 1.
                 switchIndivFanTable 1.3.6.1.4.1.3709.3.5.201.1.1.5 no-access
Table about status of individual fans.
                     switchIndivFanEntry 1.3.6.1.4.1.3709.3.5.201.1.1.5.1 no-access
Table about status of individual fans.
                         swIndivFanUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1 integer32 read-only
This is defined as swUnitIndex.
                         swIndivFanIndex 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2 integer read-only
                         swIndivFanStatus 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3 integer read-only
red(1) means down. green(2) means up. Enumeration: 'green': 2, 'red': 1.
                 switchIndivAlarmTable 1.3.6.1.4.1.3709.3.5.201.1.1.6 no-access
Table about status of individual alarms.
                     switchIndivAlarmEntry 1.3.6.1.4.1.3709.3.5.201.1.1.6.1 no-access
Table about status of individual alarms.
                         swIndivAlarmUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1 integer32 read-only
This is defined as swUnitIndex.
                         swIndivAlarmIndex 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2 integer read-only
                         swIndivAlarmStatus 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3 integer read-only
Enumeration: 'deactivated': 1, 'activated': 2.
                 switchResObj 1.3.6.1.4.1.3709.3.5.201.1.1.7 integer32 read-write
                 swHashConfig 1.3.6.1.4.1.3709.3.5.201.1.1.8 displaystring read-only
                 swHashStatus 1.3.6.1.4.1.3709.3.5.201.1.1.9 displaystring read-only
                 swCpuUsage 1.3.6.1.4.1.3709.3.5.201.1.1.10 integer32 read-only
The CPU usage (in hundredths of a percent) at the last minute.
                 swMemUsage 1.3.6.1.4.1.3709.3.5.201.1.1.11 integer32 read-only
The memory usage (percentage).
                 switchMacAddrUsageTable 1.3.6.1.4.1.3709.3.5.201.1.1.12 no-access
Table about the total of used MAC addresses entries.
                       switchMacAddrUsageEntry 1.3.6.1.4.1.3709.3.5.201.1.1.12.1 no-access
Table about the total of used MAC addresses entries.
                           swMacAddrUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1 integer32 no-access
This is defined as swUnitIndex.
                           swMacAddrUsageValue 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2 integer32 read-only
The total of used MAC addresses entries.
                 swSlotNumber 1.3.6.1.4.1.3709.3.5.201.1.1.13 integer32 read-only
The total number of interface board slots present on the device.
                 switchMpuTable 1.3.6.1.4.1.3709.3.5.201.1.1.14 no-access
Table of descriptive and status information about MPUs in this system.
                       switchMpuEntry 1.3.6.1.4.1.3709.3.5.201.1.1.14.1 no-access
An entry in the table, containing information about a single MPU in this system.
                           swMpuIndex 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1 integer32 read-only
This object identifies the MPU within the system for which this entry contains information.
                           swMpuBootLoaderVer 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2 displaystring read-only
Loader version of the main board.
                           swMpuRoleInSystem 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3 integer read-only
Indicates the MPU is active(1) or standby(2) in this system. Enumeration: 'active': 1, 'standby': 2.
                           swMpuSerialNumber 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4 displaystring read-only
Serial number of the MPU.
                           swMpuModelId 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5 integer read-only
MPU model identifier. Enumeration: 'mpu384': 10, 'mpu192': 9.
                 swHashHardware 1.3.6.1.4.1.3709.3.5.201.1.1.15 displaystring read-only
                 switchIndivAlarmOutTable 1.3.6.1.4.1.3709.3.5.201.1.1.16 no-access
Table about status of output alarms.
                       switchIndivAlarmOutEntry 1.3.6.1.4.1.3709.3.5.201.1.1.16.1 no-access
Table about status of output alarms.
                           swIndivAlarmOutUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1 integer32 read-only
This is defined as swUnitIndex.
                           swIndivAlarmOutStatus 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2 integer read-only
Indicates current alarm output status, as configured in external-alarm-output. Enumeration: 'deactivated': 1, 'activated': 2.
                 swChassisModel 1.3.6.1.4.1.3709.3.5.201.1.1.17 integer read-only
Chassis model for equipment Enumeration: 'dmSwitch4001S': 4, 'dmSwitch3000': 1, 'dmSwitch4008HighSpeed': 7, 'dmSwitch4001': 2, 'dmSwitch4001L': 3, 'dmSwitch4100': 9, 'dmSwitch4008': 6, 'objectNonexistentInModel': 2000000254, 'dmSwitch4001NewFan': 8, 'infNotAvailable': 2000000255, 'dmSwitch4004': 5.
                 switchSessionTable 1.3.6.1.4.1.3709.3.5.201.1.1.18 no-access
Table about CLI sessions informations.
                       switchSessionEntry 1.3.6.1.4.1.3709.3.5.201.1.1.18.1 no-access
An entry in the table, containing information about a single switch in this system.
                           swSessionUnitIndex 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1 integer32 no-access
This is defined as swUnitIndex.
                           swSessionName 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2 displaystring read-only
Session username.
                           swSessionUptime 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3 displaystring read-only
Login time and date (uptime).
                           swSessionPid 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4 integer read-only
CLI Session Process ID.
                           swSessionSrcIP 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5 displaystring read-only
IP from process that called CLI - telnet, ssh or inetd.
             portMgt 1.3.6.1.4.1.3709.3.5.201.1.2
                 portTable 1.3.6.1.4.1.3709.3.5.201.1.2.1 no-access
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
                     portEntry 1.3.6.1.4.1.3709.3.5.201.1.2.1.1 no-access
An entry in the table, containing information about configuration in one switch port of the switch.
                         portIndex 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1 integer32 no-access
This is defined as ifIndex in the IF-MIB.
                         portName 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2 displaystring read-write
Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
                         portType 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3 integer read-only
Indicates the port type. Enumeration: 'hundredBaseFX': 3, 'thousandBaseGBIC': 7, 'thousandBaseLX': 5, 'hundredBaseTX': 2, 'tenG': 11, 'tenGSfp': 12, 'hundredBaseFxScSingleMode': 9, 'thousandBaseT': 6, 'other': 1, 'thousandBaseSfp': 8, 'hundredBaseFxScMultiMode': 10, 'thousandBaseSX': 4.
                         portSpeedDpxCfg 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4 integer read-write
Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode fullDuplex10000(8) - 10000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus. Enumeration: 'fullDuplex10': 3, 'halfDuplex1000': 6, 'fullDuplex10000': 8, 'fullDuplex1000': 7, 'halfDuplex100': 4, 'halfDuplex10': 2, 'fullDuplex100': 5, 'reserved': 1.
                         portFlowCtrlCfg 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5 integer read-write
(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus. Enumeration: 'dot3xFlowControlRxTx': 4, 'enabled': 1, 'disabled': 2, 'dot3xFlowControlRx': 5, 'backPressure': 3, 'dot3xFlowControlTx': 6.
                         portCapabilities 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6 bits read-write
Port capabilities. Bits: 'dot3xFlowControlRxTx': 7, 'portCap100full': 3, 'portCap1000half': 4, 'portCap10half': 0, 'dot3xFlowControlTx': 9, 'portCap10000full': 6, 'portCap1000full': 5, 'portCap10full': 1, 'dot3xFlowControlRx': 8, 'portCap100half': 2.
                         portAutonegotiation 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7 integer read-write
Whether autonegotiation is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         portSpeedDpxStatus 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8 integer read-only
The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1). Enumeration: 'down': 9, 'fullDuplex10': 3, 'halfDuplex1000': 6, 'fullDuplex10000': 8, 'error': 1, 'fullDuplex1000': 7, 'halfDuplex100': 4, 'halfDuplex10': 2, 'fullDuplex100': 5.
                         portFlowCtrlStatus 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9 integer read-only
(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1). Enumeration: 'dot3xFlowControlRxTx': 3, 'disable': 6, 'error': 1, 'dot3xFlowControlRx': 4, 'backPressure': 2, 'dot3xFlowControlTx': 5.
                         portMdiStatus 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10 integer read-only
Enumeration: 'auto': 1, 'xover': 3, 'normal': 2.
                         portTrunkIndex 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11 integer32 read-only
The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPorts.
             trunkMgt 1.3.6.1.4.1.3709.3.5.201.1.3
                 trunkMaxId 1.3.6.1.4.1.3709.3.5.201.1.3.1 integer read-only
The maximum number for a trunk identifier.
                 trunkValidNumber 1.3.6.1.4.1.3709.3.5.201.1.3.2 integer read-only
The number of valid trunks.
                 trunkTable 1.3.6.1.4.1.3709.3.5.201.1.3.3 no-access
Table of descriptive and status information about configuration of each trunk, similar to Cisco EtherChannel.
                     trunkEntry 1.3.6.1.4.1.3709.3.5.201.1.3.3.1 no-access
An entry in the table, containing information about configuration in one trunk of the switch.
                         trunkIndex 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1 integer32 no-access
This object identifies the trunk within the switch for which this entry contains information.
                         trunkPorts 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2 portlist read-only
The complete set of ports currently associated with this trunk.
                         trunkCreation 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3 integer read-only
A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. Enumeration: 'lacp': 2, 'static': 1.
                         trunkStatus 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4 integer read-only
Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. Enumeration: 'valid': 1, 'invalid': 2.
             lacpMgt 1.3.6.1.4.1.3709.3.5.201.1.4
                 lacpPortTable 1.3.6.1.4.1.3709.3.5.201.1.4.1 no-access
Table for LACP port configuration.
                     lacpPortEntry 1.3.6.1.4.1.3709.3.5.201.1.4.1.1 no-access
Entry for LACP port configuration.
                         lacpPortIndex 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1 integer32 no-access
This is defined as ifIndex in the IF-MIB.
                         lacpPortStatus 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2 integer read-write
Whether 802.3ad LACP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
             staMgt 1.3.6.1.4.1.3709.3.5.201.1.5
                 staSystemStatus 1.3.6.1.4.1.3709.3.5.201.1.5.1 enabledstatus read-write
Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
                 staPortTable 1.3.6.1.4.1.3709.3.5.201.1.5.2 no-access
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
                     staPortEntry 1.3.6.1.4.1.3709.3.5.201.1.5.2.1 no-access
The conceptual entry of staPortTable.
                         staPortIndex 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1 integer32 no-access
The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in the BRIDGE-MIB.
                         staPortAdminEdgePort 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2 truthvalue read-write
The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port.
                         staPortOperEdgePort 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3 truthvalue read-only
The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received.
                         staPortAdminPointToPoint 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4 integer read-write
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'forceFalse': 1, 'forceTrue': 0, 'auto': 2.
                         staPortOperPointToPoint 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5 truthvalue read-only
The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object.
                         staPortLongPathCost 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6 integer32 read-write
The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated.
                         staPortSystemStatus 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7 enabledstatus read-write
Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled.
                 staProtocolType 1.3.6.1.4.1.3709.3.5.201.1.5.3 integer read-write
The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available. Enumeration: 'mstp': 3, 'stp': 1, 'rstp': 2.
             tftpMgt 1.3.6.1.4.1.3709.3.5.201.1.6
                 tftpFile 1.3.6.1.4.1.3709.3.5.201.1.6.1 displaystring read-write
The file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
                 tftpFlashConfig 1.3.6.1.4.1.3709.3.5.201.1.6.2 integer read-write
Number of flash config partition for to be used when the chosen action is the downloadToFlashConfig or the uploadFromFlashConfig. This values is set to the zero when no flash config has been specified.
                 tftpServer 1.3.6.1.4.1.3709.3.5.201.1.6.3 ipaddress read-write
The IP address of the TFTP server for transfer when a download or upload is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
                 tftpAction 1.3.6.1.4.1.3709.3.5.201.1.6.4 integer read-write
When this object is set to downloadToFlashConfig(1), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to flash-config(specified by tftpFlashConfig) in the device using the TFTP protocol. When this object is set to downloadToRunningConfig(2), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to running-config in the device using the TFTP protocol. When this object is set to downloadToStartupConfig(3), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to Startup-config in the device using the TFTP protocol. When this object is set to downloadToFirmware(4), the device will begin download of the file specified by tftpFile from the server specified by tftpServer to firmware in the device using the TFTP protocol. When this object is set to uploadFromFlashConfig(5), the device will begin upload of the flash-config(specified by tftpFlashConfig) in the device to tftpFile in the server specified by tftpServer. When this object is set to uploadFromRunningConfig(6), the device will begin upload of the running-config in the device to tftpFile in the server specified by tftpServer. When this object is set to uploadFromStartupConfig(7), the device will begin upload of the startup-config in the device to tftpFile in the server specified by tftpServer. When the device is not downloading, this object will have a value of notDownloading(8). Enumeration: 'notDownloading': 8, 'uploadFromRunningConfig': 6, 'uploadFromFlashConfig': 5, 'downloadToFirmware': 4, 'downloadToFlashConfig': 1, 'uploadFromStartupConfig': 7, 'downloadToRunningConfig': 2, 'downloadToStartupConfig': 3.
             restartMgt 1.3.6.1.4.1.3709.3.5.201.1.7
                 restartFirmware 1.3.6.1.4.1.3709.3.5.201.1.7.1 integer read-write
Number of firmware flash index for start-up.
                 restartConfig 1.3.6.1.4.1.3709.3.5.201.1.7.2 integer read-write
Number of configuration flash index for start-up.
                 restartControl 1.3.6.1.4.1.3709.3.5.201.1.7.3 integer read-write
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1). Enumeration: 'running': 1, 'coldBoot': 3, 'warmBoot': 2.
             mirrorMgt 1.3.6.1.4.1.3709.3.5.201.1.8
                 mirrorDestinationPort 1.3.6.1.4.1.3709.3.5.201.1.8.1 integer32 read-write
Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB.
                 mirrorTable 1.3.6.1.4.1.3709.3.5.201.1.8.2 no-access
Table of descriptive and status information about switches in this system.
                     mirrorEntry 1.3.6.1.4.1.3709.3.5.201.1.8.2.1 no-access
An entry in the table, containing information about a single switch in this system.
                         mirrorSourcePort 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 integer32 no-access
Source port for mirrored packets. This is defined as ifIndex in the IF-MIB.
                         mirrorType 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 integer read-only
If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is all(3), all packts will be mirrored Enumeration: 'all': 3, 'disable': 4, 'rx': 1, 'tx': 2.
             igmpSnoopMgt 1.3.6.1.4.1.3709.3.5.201.1.9
                 igmpSnoopStatus 1.3.6.1.4.1.3709.3.5.201.1.9.1 integer read-write
Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. Enumeration: 'disabled': 2, 'enabled': 1.
                 igmpSnoopQuerier 1.3.6.1.4.1.3709.3.5.201.1.9.2 integer read-write
Whether to act as querier. Enumeration: 'disabled': 2, 'enabled': 1.
                 igmpSnoopQueryCount 1.3.6.1.4.1.3709.3.5.201.1.9.3 integer read-write
Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports.
                 igmpSnoopQueryInterval 1.3.6.1.4.1.3709.3.5.201.1.9.4 integer read-write
Query interval.
                 igmpSnoopQueryMaxResponseTime 1.3.6.1.4.1.3709.3.5.201.1.9.5 integer read-write
Timeout value (seconds) between IGMP reports received on a port for an IP Multicast Address that can pass before the system sends an IGMP Query out the port and removes it from the list.
                 igmpSnoopQueryTimeout 1.3.6.1.4.1.3709.3.5.201.1.9.6 integer read-write
Query time-out.
                 igmpSnoopVersion 1.3.6.1.4.1.3709.3.5.201.1.9.7 integer read-write
Version.
                 igmpSnoopRouterCurrentTable 1.3.6.1.4.1.3709.3.5.201.1.9.8 no-access
Table for current router ports.
                     igmpSnoopRouterCurrentEntry 1.3.6.1.4.1.3709.3.5.201.1.9.8.1 no-access
Entry for current router ports.
                         igmpSnoopRouterCurrentVlanIndex 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 unsigned32 no-access
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
                         igmpSnoopRouterCurrentPorts 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 portlist read-only
The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable.
                 igmpSnoopRouterStaticTable 1.3.6.1.4.1.3709.3.5.201.1.9.9 no-access
Table for static router ports.
                     igmpSnoopRouterStaticEntry 1.3.6.1.4.1.3709.3.5.201.1.9.9.1 no-access
Entry for static router ports.
                         igmpSnoopRouterStaticVlanIndex 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 unsigned32 no-access
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
                         igmpSnoopRouterStaticPorts 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 portlist read-only
The set of ports which are static router ports.
                 igmpSnoopMulticastCurrentTable 1.3.6.1.4.1.3709.3.5.201.1.9.10 no-access
Table for current multicast addresses.
                       igmpSnoopMulticastCurrentEntry 1.3.6.1.4.1.3709.3.5.201.1.9.10.1 no-access
Entry for current multicast addresses.
                           igmpSnoopMulticastCurrentVlanIndex 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 unsigned32 no-access
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
                           igmpSnoopMulticastCurrentIpAddress 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 ipaddress no-access
IP address of multicast group.
                           igmpSnoopMulticastCurrentPorts 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 portlist read-only
The set of ports which are members.
                 igmpSnoopMulticastStaticTable 1.3.6.1.4.1.3709.3.5.201.1.9.11 no-access
Table for static multicast addresses.
                       igmpSnoopMulticastStaticEntry 1.3.6.1.4.1.3709.3.5.201.1.9.11.1 no-access
Entry for static multicast addresses.
                           igmpSnoopMulticastStaticVlanIndex 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 unsigned32 no-access
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
                           igmpSnoopMulticastStaticIpAddress 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 ipaddress no-access
IP address of multicast group.
                           igmpSnoopMulticastStaticPorts 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 portlist read-only
The set of ports which are static members.
             ipMgt 1.3.6.1.4.1.3709.3.5.201.1.10
                   ipAddressMode 1.3.6.1.4.1.3709.3.5.201.1.10.1 integer read-write
Enumeration: 'dhcp': 2, 'static': 1.
                   ipDefaultGateway 1.3.6.1.4.1.3709.3.5.201.1.10.2 ipaddress read-write
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                   ipPrimaryDnsServer 1.3.6.1.4.1.3709.3.5.201.1.10.3 ipaddress read-write
The IP Address of the primary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                   ipSecondaryDnsServer 1.3.6.1.4.1.3709.3.5.201.1.10.4 ipaddress read-write
The IP Address of the secondary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                   ipHttpState 1.3.6.1.4.1.3709.3.5.201.1.10.5 integer read-write
Whether HTTP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   ipHttpPort 1.3.6.1.4.1.3709.3.5.201.1.10.6 integer read-write
The port number for HTTP.
                   ipHttpsState 1.3.6.1.4.1.3709.3.5.201.1.10.7 integer read-write
Whether HTTPS is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   ipHttpsPort 1.3.6.1.4.1.3709.3.5.201.1.10.8 integer read-write
The port number for HTTPS.
                   ipTelnetState 1.3.6.1.4.1.3709.3.5.201.1.10.9 integer read-write
Whether telnet is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
             bcastStormMgt 1.3.6.1.4.1.3709.3.5.201.1.11
                   bcastStormTable 1.3.6.1.4.1.3709.3.5.201.1.11.1 no-access
Table of descriptive and status information about configuration of each switch ports(including expansion slot) in this system.
                       bcastStormEntry 1.3.6.1.4.1.3709.3.5.201.1.11.1.1 no-access
An entry in the table, containing information about configuration in one switch port of the switch.
                           bcastStormIfIndex 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1 integer32 no-access
This is defined as ifIndex in the IF-MIB.
                           bcastStormStatus 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2 integer read-write
Whether broadcast storm protection is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                           bcastStormPacketRate 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3 integer read-write
Broadcast storm threshold as packets per second.
             vlanMgt 1.3.6.1.4.1.3709.3.5.201.1.12
                   vlanTable 1.3.6.1.4.1.3709.3.5.201.1.12.1 no-access
Table for VLAN configuration.
                       vlanEntry 1.3.6.1.4.1.3709.3.5.201.1.12.1.1 no-access
Entry for VLAN configuration.
                           vlanIndex 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 unsigned32 no-access
Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.
                           vlanAddressMethod 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 integer read-write
Method to get the IP address. Enumeration: 'dhcp': 2, 'user': 1.
             priorityMgt 1.3.6.1.4.1.3709.3.5.201.1.13
                   prioWrrTable 1.3.6.1.4.1.3709.3.5.201.1.13.1 no-access
Table for weighted round robin (WRR).
                       prioWrrEntry 1.3.6.1.4.1.3709.3.5.201.1.13.1.1 no-access
Entry for weighted round robin (WRR).
                           prioWrrTrafficClass 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1 integer no-access
Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.
                           prioWrrWeight 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2 integer read-write
Weight for this entry.
                   prioQueueMode 1.3.6.1.4.1.3709.3.5.201.1.13.2 integer read-write
The global status for the prioQueue. wrr(1),strict(2) Enumeration: 'strict': 2, 'wrr': 1.
             trapDestMgt 1.3.6.1.4.1.3709.3.5.201.1.14
                   trapDestTable 1.3.6.1.4.1.3709.3.5.201.1.14.1 no-access
A list of trap destination entries.
                       trapDestEntry 1.3.6.1.4.1.3709.3.5.201.1.14.1.1 no-access
This entry includes a destination IP address to which to send traps for this community.
                           trapDestAddress 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 ipaddress no-access
The address to send traps.
                           trapDestCommunity 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 octet string read-only
A community to which this destination address belongs.
                           trapDestStatus 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 integer read-only
Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. Enumeration: 'valid': 1, 'invalid': 2.
                           trapDestVersion 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 integer read-only
This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap. Enumeration: 'version1': 1, 'version2': 2.
                   trapVar 1.3.6.1.4.1.3709.3.5.201.1.14.2
                       trapForbiddenAccessMode 1.3.6.1.4.1.3709.3.5.201.1.14.2.1 integer no-access
This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3), ssh(4). Enumeration: 'web': 1, 'snmp': 2, 'ssh': 4, 'telnet': 3.
                       trapForbiddenAccessIp 1.3.6.1.4.1.3709.3.5.201.1.14.2.2 integer32 no-access
This variable is for trap var binding, indicating the IP address that rejected by the ipfilter.
                       trapLoginUserName 1.3.6.1.4.1.3709.3.5.201.1.14.2.3 displaystring no-access
This variable is for trap var binding, indicating the name used by user to logging.
                       trapConfigSavePartition 1.3.6.1.4.1.3709.3.5.201.1.14.2.4 integer no-access
This variable is for trap var binding, indicating the partition witch the config was saved.
                       trapSfpPresenceStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.5 integer no-access
This variable is for trap var binding, indicating the presence status of a sfp connector. Enumeration: 'absentee': 1, 'present': 2.
                       trapInfAlarmVal 1.3.6.1.4.1.3709.3.5.201.1.14.2.6 integer no-access
This variable is for trap var binding, indicating the alarm value. deactivated(1), actived(2), unstable(3). Enumeration: 'deactivated': 1, 'unstable': 3, 'activated': 2.
                       trapDuplicatedIpVlan 1.3.6.1.4.1.3709.3.5.201.1.14.2.7 integer no-access
This variable is for trap var binding, indicating the vlan witch the duplicated ip was detected.
                       trapDuplicatedIpAddress 1.3.6.1.4.1.3709.3.5.201.1.14.2.8 integer32 no-access
This variable is for trap var binding, indicating the duplicated ip address.
                       trapDuplicatedIpMacAddress 1.3.6.1.4.1.3709.3.5.201.1.14.2.9 macaddress no-access
This variable is for trap var binding, indicating the mac address of the device that has the duplicated ip.
                       trapEapsDomainName 1.3.6.1.4.1.3709.3.5.201.1.14.2.10 displaystring no-access
This variable is for trap var binding, indicating the eaps domain name.
                       trapEapsDomainId 1.3.6.1.4.1.3709.3.5.201.1.14.2.11 integer no-access
This variable is for trap var binding, indicating the eaps domain identifier.
                       trapEapsStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.12 integer no-access
This variable is for trap var binding, indicating the eaps status. idle(0), complete(1), failed(2), links-up(3), links-down(4), pre-forwarding(5). Enumeration: 'complete': 1, 'pre-forwarding': 5, 'links-down': 4, 'failed': 2, 'idle': 0, 'links-up': 3.
                       trapTemperature 1.3.6.1.4.1.3709.3.5.201.1.14.2.13 integer no-access
This variable is for trap var binding, indicating the temperature in degrees Celsius.
                       trapFuseId 1.3.6.1.4.1.3709.3.5.201.1.14.2.14 integer no-access
This variable is for trap var binding, indicating the fuse indentifier.
                       trapFuseStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.15 integer no-access
This variable is for trap var binding, indicating the fuse status. normal(1), failed(2). Enumeration: 'failed': 2, 'normal': 1.
                       trapFansBoardPresenceStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.16 integer no-access
This variable is for trap var binding, indicating the presence status of the fans board. Enumeration: 'absentee': 1, 'present': 2.
                       trapStandbyMpuPresenceStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.17 integer no-access
This variable is for trap var binding, indicating the presence status of the standby MPU. Enumeration: 'absentee': 1, 'present': 2.
                       trapMacAddressMove 1.3.6.1.4.1.3709.3.5.201.1.14.2.18 macaddress no-access
This variable is for trap var binding, indicating the MAC address of the device that has moved.
                       trapMemFree 1.3.6.1.4.1.3709.3.5.201.1.14.2.19 integer no-access
This variable is for trap var binding, indicating the total memory free(in Kbytes).
                       trapBootloaderNew 1.3.6.1.4.1.3709.3.5.201.1.14.2.20 displaystring no-access
This variable is for trap var binding, indicating the installed bootloader version.
                       trapDevNo 1.3.6.1.4.1.3709.3.5.201.1.14.2.21 integer no-access
This variable is for trap var binding, indicating the Dev no of equipment.
                       trapDevLocalId 1.3.6.1.4.1.3709.3.5.201.1.14.2.22 integer no-access
This variable is for trap var binding, indicating the Serial number of remote equipment.
                       trapCesopTdmStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.23 integer no-access
This variable is for trap var binding, indicating the status of TDM interface. Enumeration: 'los': 1, 'ok': 0, 'ais': 2, 'lof': 3.
                       trapCesopTdmRemoteStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.24 integer no-access
This variable is for trap var binding, indicating the status of remote TDM interface. Enumeration: 'ralm': 5, 'ok': 0.
                       trapCesopTdmCasStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.25 integer no-access
This variable is for trap var binding, indicating the status of CAS TDM interface. Enumeration: 'ok': 0, 'lom': 4.
                       trapCesopTdmCrcStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.26 integer no-access
This variable is for trap var binding, indicating the status of CRC TDM interface. Enumeration: 'crc': 6, 'ok': 0.
                       trapCesopBundleLocalTdmStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.27 integer no-access
This variable is for trap var binding, indicating the status of Local TDM in bundle interface. Enumeration: 'fail': 1, 'rdi': 2, 'ok': 0.
                       trapCesopBundleRemoteTdmStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.28 integer no-access
This variable is for trap var binding, indicating the status of Remote TDM in bundle interface. Enumeration: 'fail': 1, 'rdi': 2, 'ok': 0.
                       trapCesopBundleLocalStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.29 integer no-access
This variable is for trap var binding, indicating the status of Local bundle interface. Enumeration: 'fail': 1, 'ok': 0.
                       trapCesopBundleRemoteStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.30 integer no-access
This variable is for trap var binding, indicating the status of Remote bundle interface. Enumeration: 'fail': 1, 'ok': 0.
                       trapCesopBundlePktMismatchStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.31 integer no-access
This variable is for trap var binding, indicating the status of packet mismatch in bundle interface. Enumeration: 'mismatch': 3, 'ok': 0.
                       trapCesopBundleNextHopStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.32 integer no-access
This variable is for trap var binding, indicating the status of Next Hop in bundle interface. Enumeration: 'down': 4, 'up': 0.
                       trapCesopClockAdapLinkQuality 1.3.6.1.4.1.3709.3.5.201.1.14.2.33 integer no-access
This variable is for trap var binding, indicating the Adaptative link quality of clock interface.
                       trapCesopClockSourceStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.34 integer no-access
This variable is for trap var binding, indicating the status of Clock Source interface. Enumeration: 'ok': 0, 'out-of-limits': 1.
                       trapBroadcastStormControlStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.35 integer no-access
This variable is for trap var binding, indicating the status of broadcsat storm control at this interface. Enumeration: 'ok': 1, 'out-of-limits': 2.
                       trapBroadcastStormControlPPS 1.3.6.1.4.1.3709.3.5.201.1.14.2.36 integer no-access
This variable is for trap var binding, indicating the current average count of broadcast packets per second at this interface.
                       trapMulticastStormControlStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.37 integer no-access
This variable is for trap var binding, indicating the status of multicsat storm control at this interface. Enumeration: 'ok': 1, 'out-of-limits': 2.
                       trapMulticastStormControlPPS 1.3.6.1.4.1.3709.3.5.201.1.14.2.38 integer no-access
This variable is for trap var binding, indicating the current average count of multicast packets per second at this interface.
                       trapStatusLDP 1.3.6.1.4.1.3709.3.5.201.1.14.2.39 integer no-access
This variable is for trap var binding, indicating the status of condition the protocol LDP. Enumeration: 'down': 2, 'up': 1, 'delete': 3.
                       trapIdLDP 1.3.6.1.4.1.3709.3.5.201.1.14.2.40 integer no-access
This variable is for trap var binding, indicating the entity identification the protocol LDP.
                       trapStatusTunnelRSVP 1.3.6.1.4.1.3709.3.5.201.1.14.2.41 integer no-access
This variable is for trap var binding, indicating the status of condition tunnel on protocol RSVP. Enumeration: 'down': 2, 'deleted': 3, 'up': 1, 'rerouted': 4.
                       trapIdTunnelRSVP 1.3.6.1.4.1.3709.3.5.201.1.14.2.42 integer no-access
This variable is for trap var binding, indicating the entity identification the tunnel on protocol RSVP.
                       trapPanelStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.43 integer no-access
This variable is for trap var binding, indicating the panel status. closed(1), open(2) Enumeration: 'open': 2, 'closed': 1.
                       trapLSTGroup 1.3.6.1.4.1.3709.3.5.201.1.14.2.44 integer no-access
This variable is for trap var binding, indicating the Link-state Tracking Group.
                       trapMemL3Free 1.3.6.1.4.1.3709.3.5.201.1.14.2.45 integer no-access
This variable is for trap var binding, indicating the total L3 memory free(in Kbytes).
                       trapActiveMpuNsfId 1.3.6.1.4.1.3709.3.5.201.1.14.2.46 integer no-access
This variable is for trap var binding, indicating the active mpu nsf-id.
                       trapStandByMpuNsfId 1.3.6.1.4.1.3709.3.5.201.1.14.2.47 integer no-access
This variable is for trap var binding, indicating the standby mpu nsf-id.
                       trapErpsDomainName 1.3.6.1.4.1.3709.3.5.201.1.14.2.48 displaystring no-access
This variable is for trap var binding, indicating the erps domain name.
                       trapErpsDomainId 1.3.6.1.4.1.3709.3.5.201.1.14.2.49 integer no-access
This variable is for trap var binding, indicating the erps domain identifier.
                       trapErpsStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.50 integer no-access
This variable is for trap var binding, indicating the erps status. init(1), idle(2), protection(3). Enumeration: 'init': 1, 'protection': 3, 'idle': 2.
                       trapCfmMdName 1.3.6.1.4.1.3709.3.5.201.1.14.2.51 displaystring no-access
This variable is for trap var binding, indicating the Maintenance Domain (MD) name that originated the trap.
                       trapCfmMaName 1.3.6.1.4.1.3709.3.5.201.1.14.2.52 displaystring no-access
This variable is for trap var binding, indicating the Maintenance Association (MA) name that originated the trap.
                       trapCfmMepId 1.3.6.1.4.1.3709.3.5.201.1.14.2.53 integer no-access
This variable is for trap var binding, indicating the Maintenance End Point ID (MEPID) that originated the trap.
                       trapCfmVlan 1.3.6.1.4.1.3709.3.5.201.1.14.2.54 integer no-access
This variable is for trap var binding, indicating the VLAN that originated the trap.
                       trapCfmDefect 1.3.6.1.4.1.3709.3.5.201.1.14.2.55 integer no-access
This variable is for trap var binding, indicating the defect condition being notified . defNone(0), defRDICCM(1), defMACstatus(2), defRemoteCCM(3), defErrorCCM(4), defXconCCM(5). Enumeration: 'defMACstatus': 2, 'defRemoteCCM': 3, 'defNone': 0, 'defErrorCCM': 4, 'defXconCCM': 5, 'defRDICCM': 1.
                       trapEvcName 1.3.6.1.4.1.3709.3.5.201.1.14.2.56 displaystring no-access
This variable is for trap var binding, indicating the EVC name.
                       trapEvcStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.57 integer no-access
This variable is for trap var binding, indicating the status of EVC being notified, notActive(0), newAndNotActive(1), active(2), newAndActive(3), partiallyActive(4), newAndPartiallyActive(5). Enumeration: 'newAndPartiallyActive': 5, 'newAndActive': 3, 'active': 2, 'partiallyActive': 4, 'notActive': 0, 'newAndNotActive': 1.
                       trapSyncSystemClockStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.58 integer no-access
This variable is for trap var binding, indicating the status of system clock Enumeration: 'locked': 4, 'freerun': 1, 'acquiring': 3, 'holdover': 2.
                       trapCesopG704ClockSourceStatus 1.3.6.1.4.1.3709.3.5.201.1.14.2.59 integer no-access
This variable is for trap var binding, indicating the status of g704 clock source. Enumeration: 'fail': 10, 'locked': 9, 'dontcare': 7.
                       trapSystemWarningsUnits 1.3.6.1.4.1.3709.3.5.201.1.14.2.60 integer no-access
This variable is for trap var binding, indicating the system warnings units. Enumeration: 'sysWarUnitsHsEnWES': 2, 'sysWarUnitsMPLS': 6, 'sysWarUnitsHsEnWHSDis': 3, 'sysWarUnitsHsEnNoError': 1, 'sysWarUnitsHsEnWDifMod': 4, 'sysWarUnitsL3': 7, 'sysWarUnitsCommFail': 5.
                       trapSensorGroup 1.3.6.1.4.1.3709.3.5.201.1.14.2.61 integer no-access
This variable indicates the sensor's type informed in notification. Enumeration: 'boardSensors': 1, 'chipsetSensors': 2.
             rateLimitMgt 1.3.6.1.4.1.3709.3.5.201.1.16
                   rateLimitPortTable 1.3.6.1.4.1.3709.3.5.201.1.16.1 no-access
Table for rate limit of each port.
                       rateLimitPortEntry 1.3.6.1.4.1.3709.3.5.201.1.16.1.1 no-access
Entry for rate limit of each port.
                           rlPortIndex 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1 integer32 no-access
The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.
                           rlPortInputStatus 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2 integer read-write
Whether input rate limit is enabled for this port. Enumeration: 'disabled': 2, 'enabled': 1.
                           rlPortOutputStatus 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3 integer read-write
Whether output rate limit is enabled for this port. Enumeration: 'disabled': 2, 'enabled': 1.
                           rlPortInputRate 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4 integer32 read-write
Rate-limit in kilobits per second. Must be multiple of 64.
                           rlPortInputBurst 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5 integer32 read-write
Maximum burst size in kilobits. Must be power of 2.
                           rlPortOutputRate 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6 integer32 read-write
Rate-limit in kilobits per second. Must be multiple of 64.
                           rlPortOutputBurst 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7 integer32 read-write
Maximum burst size in kilobits. Must be power of 2.
             securityMgt 1.3.6.1.4.1.3709.3.5.201.1.17
                   radiusMgt 1.3.6.1.4.1.3709.3.5.201.1.17.1
                       radiusServerPortNumber 1.3.6.1.4.1.3709.3.5.201.1.17.1.2 integer read-write
IP port number of RADIUS server.
                       radiusServerKey 1.3.6.1.4.1.3709.3.5.201.1.17.1.3 displaystring read-write
Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters.
                       radiusServerRetransmit 1.3.6.1.4.1.3709.3.5.201.1.17.1.4 integer read-write
Maximum number of retransmissions for RADIUS.
                       radiusServerTimeout 1.3.6.1.4.1.3709.3.5.201.1.17.1.5 integer read-write
Timeout for RADIUS.
                       radiusMultipleServerTable 1.3.6.1.4.1.3709.3.5.201.1.17.1.7 no-access
The table for multiple RADIUS server.
                           radiusMultipleServerEntry 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1 no-access
The conceptual row for radiusMultipleServerTable.
                               radiusMultipleServerIndex 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1 integer32 no-access
The RADIUS multiple server index.
                               radiusMultipleServerAddress 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2 ipaddress read-only
IP address of a multiple RADIUS server. IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleServerStatus to valid.
                               radiusMultipleServerPortNumber 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3 integer32 read-only
IP port number of a multiple RADIUS server.
                               radiusMultipleServerKey 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4 displaystring read-write
Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters.
                               radiusMultipleServerRetransmit 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5 integer read-write
Maximum number of retransmissions for RADIUS.
                               radiusMultipleServerTimeout 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6 integer read-write
Timeout for RADIUS.
                               radiusMultipleServerStatus 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                   sshMgt 1.3.6.1.4.1.3709.3.5.201.1.17.2
                       sshServerStatus 1.3.6.1.4.1.3709.3.5.201.1.17.2.1 enabledstatus read-write
The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server.
                       sshServerMajorVersion 1.3.6.1.4.1.3709.3.5.201.1.17.2.2 integer32 read-only
The major version of the SSH Server.
                       sshServerMinorVersion 1.3.6.1.4.1.3709.3.5.201.1.17.2.3 integer32 read-only
The minor version of the SSH Server.
                       sshTimeout 1.3.6.1.4.1.3709.3.5.201.1.17.2.4 integer read-write
The time interval that the router waits for the SSH client to respond. The range is 1-120.
                       sshKeySize 1.3.6.1.4.1.3709.3.5.201.1.17.2.5 integer read-write
The SSH server key size.
                       sshRsaHostKey 1.3.6.1.4.1.3709.3.5.201.1.17.2.6 keysegment read-only
The RSA host key.
                       sshDsaHostKey 1.3.6.1.4.1.3709.3.5.201.1.17.2.7 keysegment read-only
The DSA host key.
                       sshHostKeyGenAction 1.3.6.1.4.1.3709.3.5.201.1.17.2.8 integer read-write
This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1). Enumeration: 'genBothKeys': 4, 'genRsaKey': 2, 'noGen': 1, 'genDsaKey': 3.
                       sshHostKeyDelAction 1.3.6.1.4.1.3709.3.5.201.1.17.2.9 integer read-write
To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1). Enumeration: 'delRsaKey': 2, 'noDel': 1, 'delBothKeys': 4, 'delDsaKey': 3.
                   ipFilterMgt 1.3.6.1.4.1.3709.3.5.201.1.17.3
                       ipFilterSnmpTable 1.3.6.1.4.1.3709.3.5.201.1.17.3.1 no-access
A list of IP address entries.
                           ipFilterSnmpEntry 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1 no-access
This entry includes an IP address range which the system will allow to connect to this device through SNMP.
                               ipFilterSnmpAddress 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1 ipaddress no-access
The start IP address.
                               ipFilterSnmpMask 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2 ipaddress no-access
The IP mask.
                               ipFilterSnmpStatus 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                       ipFilterHTTPTable 1.3.6.1.4.1.3709.3.5.201.1.17.3.2 no-access
A list of IP address entries.
                           ipFilterHTTPEntry 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1 no-access
This entry includes an IP address range which the system will allow to connect to this device through SNMP.
                               ipFilterHTTPAddress 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1 ipaddress no-access
The start IP address.
                               ipFilterHTTPMask 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2 ipaddress no-access
The IP mask.
                               ipFilterHTTPStatus 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                       ipFilterTelnetTable 1.3.6.1.4.1.3709.3.5.201.1.17.3.3 no-access
A list of IP address entries.
                           ipFilterTelnetEntry 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1 no-access
This entry includes an IP address range which the system will allow them to connect to this device through SNMP.
                               ipFilterTelnetAddress 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1 ipaddress no-access
The start IP address.
                               ipFilterTelnetMask 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2 ipaddress no-access
The IP mask.
                               ipFilterTelnetStatus 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                       ipFilterSSHTable 1.3.6.1.4.1.3709.3.5.201.1.17.3.4 no-access
A list of IP address entries.
                           ipFilterSSHEntry 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1 no-access
This entry includes an IP address range which the system will allow them to connect to this device through SNMP.
                               ipFilterSSHAddress 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1 ipaddress no-access
The start IP address.
                               ipFilterSSHMask 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2 ipaddress no-access
The IP mask.
                               ipFilterSSHStatus 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
             sysLogMgt 1.3.6.1.4.1.3709.3.5.201.1.19
                   sysLogStatus 1.3.6.1.4.1.3709.3.5.201.1.19.1 integer read-write
Whether system log is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   sysLogHistoryFlashLevel 1.3.6.1.4.1.3709.3.5.201.1.19.2 integer read-write
Severity level for logging to flash.
                   sysLogHistoryRamLevel 1.3.6.1.4.1.3709.3.5.201.1.19.3 integer read-write
Severity level for logging to RAM.
                   remoteLogMgt 1.3.6.1.4.1.3709.3.5.201.1.19.6
                       remoteLogStatus 1.3.6.1.4.1.3709.3.5.201.1.19.6.1 enabledstatus read-write
Whether the remote log system is enabled.
                       remoteLogLevel 1.3.6.1.4.1.3709.3.5.201.1.19.6.2 integer32 read-write
Severity level for remote log.
                       remoteLogFacilityType 1.3.6.1.4.1.3709.3.5.201.1.19.6.3 integer read-write
The FacilityType for remote log. Enumeration: 'localUse3': 19, 'localUse2': 18, 'localUse1': 17, 'localUse0': 16, 'localUse7': 23, 'localUse6': 22, 'localUse5': 21, 'localUse4': 20.
                       remoteLogServerTable 1.3.6.1.4.1.3709.3.5.201.1.19.6.4 no-access
A Table for storing the remote log Server list.
                           remoteLogServerEntry 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1 no-access
A conceptually row for remoteLogServerTable.
                               remoteLogServerIp 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 ipaddress read-only
The IP address of the remote log Server.
                               remoteLogServerStatus 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
             sysTimeMgt 1.3.6.1.4.1.3709.3.5.201.1.20
                   sntpMgt 1.3.6.1.4.1.3709.3.5.201.1.20.1
                       sntpStatus 1.3.6.1.4.1.3709.3.5.201.1.20.1.1 integer read-write
Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. Enumeration: 'disabled': 2, 'enabled': 1.
                       sntpPollInterval 1.3.6.1.4.1.3709.3.5.201.1.20.1.2 integer32 read-write
Polling interval.
                       sntpServerTable 1.3.6.1.4.1.3709.3.5.201.1.20.1.3 no-access
Table for SNTP servers
                           sntpServerEntry 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1 no-access
Entry for SNTP servers.
                               sntpServerIp 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1 ipaddress read-only
The IP address of a server.
                               sntpServerStatus 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2 validstatus read-only
Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
                   sysCurrentTime 1.3.6.1.4.1.3709.3.5.201.1.20.2 displaystring read-write
It is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by the space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'.
                   sysTimeZone 1.3.6.1.4.1.3709.3.5.201.1.20.3 displaystring read-write
It is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero.
                   sysTimeZoneName 1.3.6.1.4.1.3709.3.5.201.1.20.4 displaystring read-write
The name of the time zone.
             fileMgt 1.3.6.1.4.1.3709.3.5.201.1.21
                   fileInfoTable 1.3.6.1.4.1.3709.3.5.201.1.21.1 no-access
This table contain the information of the file system; we can also perform the delete, set startup file operation.
                       fileInfoEntry 1.3.6.1.4.1.3709.3.5.201.1.21.1.1 no-access
A conceptually row for fileInfoTable.
                           fileInfoUnitID 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1 integer32 no-access
The switch unit in a stacking system, in a non-stacking system, this value is always 1.
                           fileInfoFileIndex 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2 integer32 no-access
                           fileInfoFlashId 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3 integer32 read-only
                           fileInfoFileName 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4 displaystring read-only
The file Name of the file System in the device.
                           fileInfoFileType 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5 integer read-only
The file type of the file System in the device. Enumeration: 'firmware': 1, 'config': 2.
                           fileInfoIsStartUp 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6 truthvalue read-write
This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation.
                           fileInfoFileSize 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7 integer32 read-only
The sizes (in bytes) of the file.
                           fileInfoCreationTime 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8 displaystring read-only
The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'.
                           fileInfoDelete 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9 integer read-write
Write this object to delete(2) to delete a file, when read, this always return noDelete(1). Enumeration: 'noDelete': 1, 'delete': 2.
             countMgt 1.3.6.1.4.1.3709.3.5.201.1.22
                   countHoldPktsTable 1.3.6.1.4.1.3709.3.5.201.1.22.1 no-access
Table of dropped packets counters by interface for QoS statistics.
                       countHoldPktsEntry 1.3.6.1.4.1.3709.3.5.201.1.22.1.1 no-access
An entry in the table, containing the number of dropped packets in a single interface.
                           interfaceNumber 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1 integer32 read-only
Interface Number from dropped packets.
                           countHoldPkts 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2 counter64 read-only
Counter Hold shows the number of dropped packets in a single interface.
             filterCounterMgt 1.3.6.1.4.1.3709.3.5.201.1.23
                   filterCounterInfoTable 1.3.6.1.4.1.3709.3.5.201.1.23.1 no-access
This table contain the description about counters, so they can be used to measure performance from user-based filters.
                       filterCounterInfoEntry 1.3.6.1.4.1.3709.3.5.201.1.23.1.1 no-access
A conceptually row for filterCounterInfoTable.
                           filterCounterInfoIndex 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1 integer32 read-only
Index for counter, matches current CLI information
                           filterCounterInfoRemark 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2 displaystring read-only
Remark is a textual description, as configured by user.
                   filterCounterValueTable 1.3.6.1.4.1.3709.3.5.201.1.23.2 no-access
This table contains current values for filter counters.
                       filterCounterValueEntry 1.3.6.1.4.1.3709.3.5.201.1.23.2.1 no-access
A conceptually row for filterCounterValueTable.
                           filterCounterValueIndex 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1 integer32 read-only
Subcounters index identifies each internal counter that a user-editable counter can have. Internal counters may differ from equipament model to other.
                           filterCounterValue 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2 counter64 read-only
The total number of data which matches internal subcounter. It can be bytes or packets, according to equipment configuration. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times.
             eapsMgt 1.3.6.1.4.1.3709.3.5.201.1.24
                   eapsInfoTable 1.3.6.1.4.1.3709.3.5.201.1.24.1 no-access
This table contains EAPS information about all EAPS domains on this device.
                       eapsInfoEntry 1.3.6.1.4.1.3709.3.5.201.1.24.1.1 no-access
An individual entry of this table contains EAPS information related to that EAPS domain.
                           eapsInfoId 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1 integer read-only
This indicates the mode of the EAPS Id.
                           eapsInfoName 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2 displaystring read-only
The EAPS domain name.
                           eapsInfoMode 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3 integer read-only
This indicates the mode of the EAPS domain. Enumeration: 'transit': 2, 'master': 1, 'invalid': 0.
                           eapsInfoState 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4 integer read-only
This indicates the current EAPS state of this EAPS domain. Enumeration: 'linksup': 3, 'complete': 1, 'linkdown': 4, 'init': 6, 'failed': 2, 'idle': 0, 'preforwarding': 5.
             cfmProbeMgmt 1.3.6.1.4.1.3709.3.5.201.1.25
                   cfmProbeDmTable 1.3.6.1.4.1.3709.3.5.201.1.25.1 no-access
This table contains CFM delay measurements informationS.
                       cfmProbeDmEntry 1.3.6.1.4.1.3709.3.5.201.1.25.1.1 no-access
An individual entry of this table contains CFM delay measurements information related to that probe.
                           cfmProbeDmIndex 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1 integer read-only
The index value used to identify the probe.
                           cfmProbeDmAvgDelay 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2 integer32 read-only
The average delay in microseconds of CFM delay measurement.
                           cfmProbeDmAvgJitter 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3 integer32 read-only
The average jitter in microseconds of CFM delay measurement.
                           cfmProbeDmLoss 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4 integer read-only
The percentage of CFM frames lost on the indicate probe.
             cpumonMgmt 1.3.6.1.4.1.3709.3.5.201.1.26
                   cpuActiveUsageTable 1.3.6.1.4.1.3709.3.5.201.1.26.1 no-access
Table of cpu usage.
                       cpuActiveUsageEntry 1.3.6.1.4.1.3709.3.5.201.1.26.1.1 no-access
Table of cpu usage.
                           cpuActiveUsageIndex 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                           cpuActiveUsageValue 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2 integer32 read-only
The CPU usage (in hundredths of a percent).
                   memActiveUsageTable 1.3.6.1.4.1.3709.3.5.201.1.26.2 no-access
Table of memory usage.
                       memActiveUsageEntry 1.3.6.1.4.1.3709.3.5.201.1.26.2.1 no-access
Table of memory usage.
                           memActiveUsageIndex 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                           memActiveUsageValue 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2 integer32 read-only
The memory usage (percentage).
                   cpuStandbyUsageTable 1.3.6.1.4.1.3709.3.5.201.1.26.3 no-access
Table of cpu usage.
                       cpuStandbyUsageEntry 1.3.6.1.4.1.3709.3.5.201.1.26.3.1 no-access
Table of cpu usage.
                           cpuStandbyUsageIndex 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                           cpuStandbyUsageValue 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2 integer32 read-only
The CPU usage (in hundredths of a percent).
                   memStandbyUsageTable 1.3.6.1.4.1.3709.3.5.201.1.26.4 no-access
Table of memory usage.
                       memStandbyUsageEntry 1.3.6.1.4.1.3709.3.5.201.1.26.4.1 no-access
Table of memory usage.
                           memStandbyUsageIndex 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                           memStandbyUsageValue 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2 integer32 read-only
The memory usage (percentage).
             queuePortMgmt 1.3.6.1.4.1.3709.3.5.201.1.27
                   queuePortTable 1.3.6.1.4.1.3709.3.5.201.1.27.1 no-access
Table for statistics of interface queues.
                       queuePortEntry 1.3.6.1.4.1.3709.3.5.201.1.27.1.1 no-access
An entry in the table, containing information about configuration in one switch port of the switch.
                           queuePortIfIndex 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1 integer32 no-access
This is defined as ifIndex in the IF-MIB.
                           queuePortQueueIndex 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2 integer32 no-access
The COS queue from the interface.
                           queuePortSentPackets 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3 counter64 read-only
Counter of sent packets.
                           queuePortSentBytes 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4 counter64 read-only
Counter of sent bytes.
                           queuePortDroppedPackets 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5 counter64 read-only
Counter of dropped packets.
                           queuePortDroppedBytes 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6 counter64 read-only
Counter of dropped bytes.
             ddTransceiversMgmt 1.3.6.1.4.1.3709.3.5.201.1.28
                   ddTransceiversTable 1.3.6.1.4.1.3709.3.5.201.1.28.1 no-access
Transceivers digital diagnostic table.
                       ddTransceiversEntry 1.3.6.1.4.1.3709.3.5.201.1.28.1.1 no-access
An entry in the table, containing information about digital diagnostic.
                           ddTransceiversIfIndex 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1 integer32 no-access
This is defined as ifIndex in the IF-MIB.
                           ddTransceiversTemperature 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2 displaystring read-only
Transceiver temperature information in Celsius
                           ddTransceiversVcc3v3 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3 displaystring read-only
Transceiver Vcc 3v3 information in Volts
                           ddTransceiversRxPower 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4 displaystring read-only
Transceiver rx power information in Decibels
                           ddTransceiversTxPower 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5 displaystring read-only
Transceiver tx power information in Decibels
                           ddTransceiversTxBias 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6 displaystring read-only
Transceiver tx bias information in Amperes
         dmSwitchNotifications 1.3.6.1.4.1.3709.3.5.201.2
             dmSwitchTraps 1.3.6.1.4.1.3709.3.5.201.2.1
                 dmSwitchTrapsPrefix 1.3.6.1.4.1.3709.3.5.201.2.1.0
                     swLoginFailTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40001
This trap is sent when an user try logging with a incorrect username or password.
                     swLoginSucessTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40002
This trap is sent when an user get logging.
                     swStackAttachTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40003
This trap is sent when a device is attached in stack.
                     swStackDetachTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40004
This trap is sent when a device is detached from stack.
                     swForbiddenAccessTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40005
This trap is sent when an incorrect IP address is rejected by the ipfilter.
                     swSfpPresenceTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40006
This trap is sent when a sfp conector is taken off or placed.
                     swConfigChangeTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40007
This trap is sent when the device's config change.
                     swConfigSaveTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40008
This trap is sent when the device's config is saved.
                     swFanStatusChangeTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40009
This trap is sent when the status of one fan changes.
                     swTrapsLostTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40010
This trap is sent when one or more traps are discarded.
                     swPowerStatusChangeTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40011
This trap is sent when the status of one PSU changes.
                     swAlarmTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40012
This trap is sent when the status of one alarm changes.
                     swDuplicatedIp 1.3.6.1.4.1.3709.3.5.201.2.1.0.40013
This trap is sent when a duplicate ip is detected.
                     swLoopbackOnPortDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40014
This trap is sent when a loopback on port is detected.
                     swLoopbackOnPortNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40015
This trap is sent when a loopback on port is no more detected.
                     swUnidirLinkDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40016
This trap is sent when a unidirectional link on port is detected.
                     swUnidirLinkRecovered 1.3.6.1.4.1.3709.3.5.201.2.1.0.40017
This trap is sent when a unidirectional link on port is recovered.
                     swCriticalEventDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40018
This trap is sent when a critical event on port is detected.
                     swCriticalEventRecovered 1.3.6.1.4.1.3709.3.5.201.2.1.0.40019
This trap is sent when a critical event on port is recovered.
                     swLinkFlapDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40020
This trap is sent when a link-flap on port is detected.
                     swLinkFlapNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40021
This trap is sent when a link-flap on port is no more detected.
                     swEapsStatusChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40022
This trap is sent when the eaps status change.
                     swPortSecurityViolation 1.3.6.1.4.1.3709.3.5.201.2.1.0.40023
This trap is sent when a port-security violation happens.
                     swHighTemperatureDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40024
This trap is sent when a high temperature is detected.
                     swHighTemperatureNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40025
This trap is sent when a high temperature is no more detected.
                     swFuseStatusChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40026
This trap is sent when the status of on fuse changes.
                     swFansBoardPresenceTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40027
This trap is sent when the fans board is taken off or placed.
                     swStandbyMpuTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40028
This trap is sent when the standby MPU is taken off or placed.
                     swNonHomologSfpTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40029
This trap is sent when a non-homologated SFP is placed.
                     swHighCpuUsageDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40030
This trap is sent when the CPU utilization is greater than 90%.
                     swHighCpuUsageNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40031
This trap is sent when the CPU utilization is lower than 90%.
                     swDuplicatedMac 1.3.6.1.4.1.3709.3.5.201.2.1.0.40032
This trap is sent when a MAC address move is detected.
                     swHighMemoryUsageDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40033
This trap is sent when the memory utilization is critical.
                     swHighMemoryUsageNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40034
This trap is sent when the memory utilization is normal.
                     swNewBootloaderVersion 1.3.6.1.4.1.3709.3.5.201.2.1.0.40035
This trap is sent when a new bootloader version is saved.
                     swCesopTdmStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40036
This trap is sent when TDM status change.
                     swCesopTdmRemoteStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40037
This trap is sent when TDM Remote status change (RALM).
                     swCesopTdmCasStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40038
This trap is sent when TDM Cas status change (LOM).
                     swCesopTdmCrcStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40039
This trap is sent when TDM CRC status change (CRC).
                     swCesopBundleLocalTdmStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40040
This trap is sent when Bundle Local TDM status change.
                     swCesopBundleRemoteTdmStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40041
This trap is sent when Bundle Remote TDM status change.
                     swCesopBundleLocalStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40042
This trap is sent when Bundle Local status change.
                     swCesopBundleRemoteStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40043
This trap is sent when Bundle Remote status change.
                     swCesopBundlePktMismatchTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40044
This trap is sent when Packet mismatch status chanege in Bundle Interface.
                     swCesopBundleNextHopTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40045
This trap is sent when Packet mismatch status chanege in Bundle Interface.
                     swCesopClockAdapLinkQualityTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40046
This trap is sent when Adaptative link quality change in clock source interface.
                     swCesopClockSourceTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40047
This trap is sent when Source clock status change.
                     swRemoteDeviceReady 1.3.6.1.4.1.3709.3.5.201.2.1.0.40048
This trap is sent when a remote device becomes ready to be managed.
                     swRemoteDeviceLost 1.3.6.1.4.1.3709.3.5.201.2.1.0.40049
This trap is sent when a remote device is no longer manageable.
                     swRemoteDeviceConfigFail 1.3.6.1.4.1.3709.3.5.201.2.1.0.40050
This trap is sent when the configuration sent to a remote device is rejected.
                     swRemoteDeviceConfigForced 1.3.6.1.4.1.3709.3.5.201.2.1.0.40051
This trap is sent when a remote device configuration is forced.
                     swFanFuseStatusChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40052
This trap is sent when the fan board fuse change its status.
                     swDyingGaspPackReceived 1.3.6.1.4.1.3709.3.5.201.2.1.0.40053
This trap is sent every time an OAM:Dying Gasp package is received on port
                     swBroadcastStormCheckChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40054
This trap is sent when a broadcast storm threshold is hit or recovers.
                     swMulticastStormCheckChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40055
This trap is sent when a multicast storm threshold is hit or recovers.
                     swBpduProtectLimit 1.3.6.1.4.1.3709.3.5.201.2.1.0.40056
This trap is sent when a BPDU limit has reached.
                     swChangeStatusLDP 1.3.6.1.4.1.3709.3.5.201.2.1.0.40057
This trap is sent when occurs one change on status the protocol LDP.
                     swChangeStatusTunnelRSVP 1.3.6.1.4.1.3709.3.5.201.2.1.0.40058
This trap is sent when occurs one change on status the tunnels of protocol RSVP.
                     swBpduProtect 1.3.6.1.4.1.3709.3.5.201.2.1.0.40059
This trap is sent when a BPDU protect block time expired.
                     swRouteTableFull 1.3.6.1.4.1.3709.3.5.201.2.1.0.40060
This trap is sent when L3 Routing Table reaches its limits.
                     swPanelStatusTrap 1.3.6.1.4.1.3709.3.5.201.2.1.0.40061
This trap is sent when the Panel status change.
                     swLSTGroupLinkStatusDown 1.3.6.1.4.1.3709.3.5.201.2.1.0.40062
This trap is sent when a link-state tracking group is down
                     swLSTGroupLinkStatusUp 1.3.6.1.4.1.3709.3.5.201.2.1.0.40063
This trap is sent when a link-state tracking group is up
                     swHighCpuL3UsageDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40064
This trap is sent when the CPU L3 utilization is greater than 90%.
                     swHighCpuL3UsageNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40065
This trap is sent when the CPU L3 utilization is lower than 90%.
                     swHighMemoryL3UsageDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40066
This trap is sent when the L3 memory utilization is critical.
                     swHighMemoryL3UsageNoMoreDetected 1.3.6.1.4.1.3709.3.5.201.2.1.0.40067
This trap is sent when the L3 memory utilization is normal.
                     swMpuNsfIdDiffers 1.3.6.1.4.1.3709.3.5.201.2.1.0.40068
This trap is sent when the active and standby mpu nsf-id differs.
                     swErpsStatusChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40069
This trap is sent when the erps status change.
                     swCfmDefect 1.3.6.1.4.1.3709.3.5.201.2.1.0.40070
This trap is sent when some CFM MEP enters or leave an error state.
                     swLldpRemoteChange 1.3.6.1.4.1.3709.3.5.201.2.1.0.40071
This trap is sent when LLDP remote table changes.
                     swPoeOverCurrent 1.3.6.1.4.1.3709.3.5.201.2.1.0.40072
This trap is sent when a Power over Ethernet enabled port was shut down due an overcurrent.
                     swPoePowerRestriction 1.3.6.1.4.1.3709.3.5.201.2.1.0.40073
This trap is sent when an Power over Ethernet enabled port was shut down because the connected device announced an power consumption over the configured for the port.
                     swCoreDump 1.3.6.1.4.1.3709.3.5.201.2.1.0.40074
This trap is sent when an application terminate abnormally and generates a core dump.
                     swElmiEvcStatus 1.3.6.1.4.1.3709.3.5.201.2.1.0.40075
This trap is sent when an EVC changes its state.
                     swSyncSystemClockSwitchHier 1.3.6.1.4.1.3709.3.5.201.2.1.0.40076
This trap is sent when system changes active clock synchronize hierarchy
                     swSyncSystemClockStatus 1.3.6.1.4.1.3709.3.5.201.2.1.0.40077
This trap is sent when system clock changes its status
                     swHostTableFull 1.3.6.1.4.1.3709.3.5.201.2.1.0.40078
This trap is sent when L3 Host Table reaches its limits.
                     swSyncG704ClockStatus 1.3.6.1.4.1.3709.3.5.201.2.1.0.40079
This trap is sent when g704 clock source changes its status.
                     swSystemWarningsUnits 1.3.6.1.4.1.3709.3.5.201.2.1.0.40080
This trap is sent when warnings in the system units are found.
                     swRebootDueToOvertemp 1.3.6.1.4.1.3709.3.5.201.2.1.0.40081
This trap is sent when the device reboots due to overheat.
         dmSwitchConformance 1.3.6.1.4.1.3709.3.5.201.3