DLINKSW-SSL-MIB: View SNMP OID List / Download MIB

This MIB module defines objects for Secure Socket Layer (SSL).

A table of importing certificates and key pairs. There will at any time be either 0 or 1 rows in this table, and the only valid index for this table is 1. It is only a table so that we may take advantage of the RowStatus textual convention for configuring the importing parameters. The row in this table is volatile; that is, it is lost if the SNMP agent is rebooted.

The row in the dSslCryptoPkiImportCertTable containing the importing parameters. Once an entry has been activated, the importing parameters cannot be modified. In order to use a new value, you need delete the old entry and create a new one.

The index which uniquely identifies this row.

Name of the trustpoint to which the certificates and key pairs will be imported.

An indication of the source from where the certificates/key pairs will be imported. filesystem(1) - The certificates/key pairs will be imported from the switch's file system. tftp(2) - The certificates/key pairs will be imported via tftp. Enumeration: 'tftp': 2, 'filesystem': 1.

If dSslCryPkiImportCertSrcType is 'filesystem', this object indicates the file name and path of the importing certificate and key pairs in switch's file system. The supported file systems are project dependent. If dSslCryPkiImportCertSrcType is 'tftp', this object indicates the file name and path where the switch should import via TFTP server. By default, the switch will appends this name with .ca, .prv and .crt for CA certificate, private key and certificate respectively.

The type of address in the corresponding dSslCryPkiImportCertAddr object.

The address of TFTP server.

Specifies the encrypted password phrase that is used to undo encryption when the private keys are imported.

An object indicates what kind of certificate will be imported. Setting a type's bit to 1 means the type of certificate will be imported. ca (0) - Import CA certificate. local (1) - Import local certificate and key pairs. Bits: 'ca': 0, 'local': 1.

A textual description of the current status of the importing. The status information includes: idle, in progress, success, aborted, idle, corruptFile, no server....

The status of this import entry. This object may not be set to 'active' if the following columnar objects exist in this row: dSslCryPkiImportCertTrustPoint, dSslCryPkiImportFilename, and dSslCryPkiImportFileType. Besides, if dSslCryPkiImportCertSrcType is 'tftp' the columnar objects dSslCryPkiImportCertAddrType and dSslCryPkiImportCertAddr must be configured.

A table defines and configures trustpoint(s) in the switch.

The row in the dSslCryptoPkiTrustpointTable containing the trustpoint parameters. An entry is created/removed when a name for a specific trustpoint is generated or deleted via CLI or by issuing appropriate sets to this table using snmp.

Name of the trustpoint for which this entry pertains to.

This object specifies a given trustpoint as primary. This trustpoint can be used as default trustpoint when the application doesn't explicitly specify which certificate authority (CA) trustpoint should be used. Only one trustpoint can be specified as primary. That is the last trustpoint you specify as primary will overwrite the previous one.

Status of this trustpoint.

A table manages CA certificate(s) or the switch certificate(s) and keys.

The row in the dSslCryptoPkiCertTable containing the parameters of a certificate. An entry in this table appears automatically whenever the certificate or keypairs is imported successfully. An entry is removed when a certificate name is deleted via CLI or by issuing appropriate sets to this table using snmp.

Indicates the name of the certificate for which this entry pertains to.

This object specifies the type of the certificate. ca(1) - CA certificate. localCertificate(2) - local certificate. localPrivateKey(3) - local private key. Enumeration: 'localPrivateKey': 3, 'ca': 1, 'localCertificate': 2.

This object is used to delete this entry. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. Enumeration: 'noOp': 2, 'delete': 1.

A table controlls the parameters of SSL service policies.

The row in the dSslServicePolicyTable containing the parameters of a SSL service policy. An entry is created/removed when a name for a specific policy is generated or deleted via CLI or by issuing appropriate sets to this table using snmp.

Indicates the name of the policy for which this entry pertains to.

This object indicates a ciphersuite should be used by the secure service when negotiating a connection with a remote peer. Setting a ciphersuite's bit to 1 enables the ciphersuite. Setting this bit to 0 disables it. dheDss3DesEdeCbcSha(0): Uses ephemeral Diffie-Hellman key exchange with 3DES-EDE-CBC encryption and SHA for message digest. rsa3desEdeCbcSha(1): Uses RSA key exchange with 3DES-EDE-CBC for message encryption and SHA for message digest. rsaRc4128Sha(2): Uses RSA key exchange with RC4 128-bit encryption for message encryption and SHA for message digest. rsaRc4128Md5(3): Uses RSA key exchange with RC4 128-bit encryption for message encryption and MD5 for message digest. rsaExportRc440Md5(4): Uses RSA EXPORT key exchange with RC4 40 bits for message encryption and MD5 for message digest. rsaAes128CbcSha(5): Uses RSA key exchange with AES 128 bits for message encryption and SHA for message digest. rsaAes256CbcSha(6): Uses RSA exchange with AES 256 bits for message encryption and SHA for message digest. rsaAes128CbcSha256(7): Uses RSA key exchange with AES 128 bits for message encryption and SHA256 for message digest. rsaAes256CbcSha256(8): Uses RSA key exchange with AES 256 bits for message encryption and SHA256 for message digest. dheDssAes256CbcSha(9): Uses ephemeral Diffie-Hellman key exchange with AES 256 bits for message encryption and SHA for message digest. dheRsaAes256CbcSha(10): Uses ephemeral Diffie-Hellman key exchange with AES 256 bits for message encryption and SHA for message digest. Bits: 'rsaRc4128Md5': 3, 'rsaExportRc440Md5': 4, 'dheDssAes256CbcSha': 9, 'rsaAes256CbcSha': 6, 'rsaAes128CbcSha': 5, 'dheDss3DesEdeCbcSha': 0, 'rsaRc4128Sha': 2, 'rsa3desEdeCbcSha': 1, 'dheRsaAes256CbcSha': 10, 'rsaAes256CbcSha256': 8, 'rsaAes128CbcSha256': 7.

Specifies the name of the trustpoint that should be used in SSL handshake. When secure-trustpoint is not specified, the primary trustpoint (the value of dSslCryptoPkiTrustpointPrimary is 'true') will be used. If no trustpoint is specified (empty string), the built-in certificate/key pairs will be used.

This object indicates the Cache Timeout value in the policy for SSL module to refresh the session resume data kept in database.

Status of this policy.

This object indicates the SSL or TLS versions are enabled or not in the system. If the bit is 1 , indicate that version is enabled , else is disabled . Bits: 'ssl3-0': 0, 'tls1-0': 1, 'tls1-1': 2, 'tls1-2': 3.

The compliance statement for entities which implement the DLINKSW-SSL-MIB.

A collection of objects for manage importing certificates and key pairs.

A collection of objects for manage trustpoints and certificates and key pairs.

A collection of objects for manage trustpoints and certificates and key pairs.