DLINKSW-ERROR-DISABLE-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKSW-ERROR-DISABLE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkSwErrDisableMIB 1.3.6.1.4.1.171.14.45
This MIB module defines objects for error disabled.
       dErrDisableMIBNotifications 1.3.6.1.4.1.171.14.45.0
           dErrDisNotifyPortDisabledAssert 1.3.6.1.4.1.171.14.45.0.1
The trap is sent when a port enters into error disabled state.
           dErrDisNotifyPortDisabledClear 1.3.6.1.4.1.171.14.45.0.2
The trap is sent when a port loop restarts after the interval time.
           dErrDisNotifyVlanDisabledAssert 1.3.6.1.4.1.171.14.45.0.3
The trap is sent when a Port with a VID loop occurs.
           dErrDisNotifyVlanDisabledClear 1.3.6.1.4.1.171.14.45.0.4
The trap is sent when a Port with a VID restarts after the interval time.
       dErrDisableMIBObjects 1.3.6.1.4.1.171.14.45.1
           dErrDisRecoveryTable 1.3.6.1.4.1.171.14.45.1.1 no-access
This table contains the recovery mechanism for the features with error-disable functionality. Transceiver monitoring module (the DErrDisReasonID is 'ddm') can also put a SFP port which is in abnormal status in error disabled state. This error disable cannot be auto recovered but can only be manually recovered. As a result, there is no entry for error cause is 'ddm' in this table.
               dErrDisRecoveryEntry 1.3.6.1.4.1.171.14.45.1.1.1 no-access
An entry is created for each feature which has error-disable functionality.
                   dErrDisRecoveryIndex 1.3.6.1.4.1.171.14.45.1.1.1.1 derrdisreasonid no-access
This object indicates the cause of error-disable.
                   dErrDisRecoveryEnable 1.3.6.1.4.1.171.14.45.1.1.1.2 truthvalue read-write
This object specifies whether the system can automatically recover a system entity that has been disabled by the cause.
                   dErrDisRecoveryInterval 1.3.6.1.4.1.171.14.45.1.1.1.3 integer32 read-write
Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation.
           dErrDisIfStatusTableNum 1.3.6.1.4.1.171.14.45.1.2 unsigned32 read-only
Indicates the number of entries present in the dErrDisIfStatusTable.
           dErrDisIfStatusTable 1.3.6.1.4.1.171.14.45.1.3 no-access
This table provides next recovery timeout information about an interface disabled by a feature.
               dErrDisIfStatusEntry 1.3.6.1.4.1.171.14.45.1.3.1 no-access
An entry indicates next recovery timeout information about an interface or (interface, vlan) disabled by a feature.
                   dErrDisIfStatusIfIndex 1.3.6.1.4.1.171.14.45.1.3.1.1 interfaceindex no-access
This object is the interface index of the interface disabled by a feature.
                   dErrDisIfStatusVlanIndex 1.3.6.1.4.1.171.14.45.1.3.1.2 vlanidornone no-access
This object indicates the VLAN in the given interface that has been error-disabled. If the physical interface is error-disabled then the value of this object is 0.
                   dErrDisIfStatusDisReasonIndex 1.3.6.1.4.1.171.14.45.1.3.1.3 derrdisreasonid no-access
This object indicates the reason which cause the interface disabled.
                   dErrDisIfStatusTimeLeft 1.3.6.1.4.1.171.14.45.1.3.1.4 unsigned32 read-only
This object indicates the time left that the interface will be automatically recovered. Value 0xFFFFFFFF indicates the interface won't be automatically recovered.
           dErrDisNotificationEnable 1.3.6.1.4.1.171.14.45.1.4 bits read-write
This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. errDisableAsserted(0) - Controls the notifications for a port/vlan entering into error disabled state. errDisableCleared(1) - Controls the notifications for a port/vlan exiting from error disabled state. Bits: 'errDisableAsserted': 0, 'errDisableCleared': 1.
           dErrDisNotifRate 1.3.6.1.4.1.171.14.45.1.5 unsigned32 read-write
Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A value of 0 indicates that an SNMP Notification is generated for every error disabled event.
           dErrDisNotifyInfo 1.3.6.1.4.1.171.14.45.1.6
               dErrDisNotifyInfoPortIfIndex 1.3.6.1.4.1.171.14.45.1.6.1 interfaceindex no-access
This object indicates the port number of error disabled port.
               dErrDisNotifyInfoLoopDetectedVID 1.3.6.1.4.1.171.14.45.1.6.2 vlanid no-access
This object indicates the VLAN ID that has detected a loopback.
               dErrDisNotifyInfoReasonID 1.3.6.1.4.1.171.14.45.1.6.3 derrdisreasonid no-access
This object indicates the condition which cause a port/vlan enter into error disabled state.
       dErrDisableMIBConformance 1.3.6.1.4.1.171.14.45.2
           dErrDisMIBCompliances 1.3.6.1.4.1.171.14.45.2.1
               dErrDisMIBCompliance 1.3.6.1.4.1.171.14.45.2.1.1
The compliance statement for entities which implement the DLINKSW-ERROR-DISABLE-MIB.
           dErrDisMIBGroups 1.3.6.1.4.1.171.14.45.2.2
               dErrDisRecoveryCfgGroup 1.3.6.1.4.1.171.14.45.2.2.1
A collection of objects to configure the error recovery of the error-disable feature.
               dErrDisIfStatusGroup 1.3.6.1.4.1.171.14.45.2.2.2
A collection of objects which indicate error-disable interface status.
               dErrDisNotifyCfgGroup 1.3.6.1.4.1.171.14.45.2.2.3
A collection of objects to configure the error recovery of the error-disable feature.
               dErrDisNotificationGroup 1.3.6.1.4.1.171.14.45.2.2.4
The collection of notifications used for monitoring ErrDisable status