DLINKPRIME-CABLE-DIAG-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKPRIME-CABLE-DIAG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkPrimeCableDiagMIB 1.3.6.1.4.1.171.15.1
     dpCableDiagNotifications 1.3.6.1.4.1.171.15.1.0
     dpCableDiagObjects 1.3.6.1.4.1.171.15.1.1
         dpCableDiagIfTable 1.3.6.1.4.1.171.15.1.1.1
A table contains a list of information about test on the devices interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test.
             dpCableDiagIfEntry 1.3.6.1.4.1.171.15.1.1.1.1
An entry in the dpCableDiagIfTable, contains the testing controls on an interface.
                 dpCableDiagIfAction 1.3.6.1.4.1.171.15.1.1.1.1.1
This object control the action to be executed on the interface. noOp(1) - No action is taken if this object is set to noOp. When read, the value noOp is returned. test(2) - Start the test on the interface. clear(3) - Clear all the test results on the interface. The value of the following objects of the entry will become other. -- dpCableDiagResultPair1Status -- dpCableDiagResultPair2Status -- dpCableDiagResultPair3Status -- dpCableDiagResultPair4Status The value of the following objects of the entry will become -1 (unavailable) -- dpCableDiagResultPair1Length -- dpCableDiagResultPair2Length -- dpCableDiagResultPair3Length -- dpCableDiagResultPair4Length The value of dpCableDiagResultStatus of the entry will become notRun.
         dpCableDiagResultTable 1.3.6.1.4.1.171.15.1.1.2
A table contains a list of interfaces cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port.
             dpCableDiagResultEntry 1.3.6.1.4.1.171.15.1.1.2.1
An entry in dpCableDiagResultTable contains cable situation of an interface.
                 dpCableDiagResultCableStatus 1.3.6.1.4.1.171.15.1.1.2.1.1
The status of a pair of the cable. no_result(0) - The cable have not do cable daig or result have been clear. ok(1) - The pair or cable has no error. noCable(2) - The port does not have any cable connection to the remote partner. open(3) - The cable in the error pair does not have a connection at the specified position. short(4) - The cable in the error pair has a short problem at the specified position. openOrShort(5) - The PHY has no capability to distinguish between open and short state. crosstalk(6)- The cable in the error pair has a crosstalk problem at the specified position.
                 dpCableDiagResultCableLength 1.3.6.1.4.1.171.15.1.1.2.1.2
This object indicates the approximate length or length to the failure of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
                 dpCableDiagLinkStatus 1.3.6.1.4.1.171.15.1.1.2.1.3
The current link operational state of the interface.
                 dpCableDiagInterfaceType 1.3.6.1.4.1.171.15.1.1.2.1.4
The current port type of the interface.
     dpCableDiagConformance 1.3.6.1.4.1.171.15.1.2
         dpCableDiagCompliances 1.3.6.1.4.1.171.15.1.2.1
             dpCableDiagGroups 1.3.6.1.4.1.171.15.1.2.1.2