DLINKMGMT-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: DLINKMGMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ID-REC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkMgmtMIB 1.3.6.1.4.1.326.2.20.1.11
The Structure of Common Management Information for the D-Link enterprise.
       agentConfigInfo 1.3.6.1.4.1.326.2.20.1.11.1
           agentBasicInfo 1.3.6.1.4.1.326.2.20.1.11.1.1
               agentRuntimeSwVersion 1.3.6.1.4.1.326.2.20.1.11.1.1.1 displaystring read-only
This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
               agentPromFwVersion 1.3.6.1.4.1.326.2.20.1.11.1.1.2 displaystring read-only
This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'
               agentHwRevision 1.3.6.1.4.1.326.2.20.1.11.1.1.3 displaystring read-only
This is a textual description of the hardware version and revision. If the version number is one and revision number is zero agentHwRevision would be 'Ver. 1.0'
               agentMgmtProtocolCapability 1.3.6.1.4.1.326.2.20.1.11.1.1.4 integer read-only
The network management protocol(s) supported by this agent. Enumeration: 'snmp-ip-ipx': 4, 'other': 1, 'snmp-ipx': 3, 'snmp-ip': 2.
               agentMibCapabilityTable 1.3.6.1.4.1.326.2.20.1.11.1.1.5 no-access
A list of MIB capability entries supported by this agent.
                   agentMibCapabilityEntry 1.3.6.1.4.1.326.2.20.1.11.1.1.5.1 no-access
A MIB capability entry contains objects describing a particular MIB supported by this agent.
                       agentMibCapabilityIndex 1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.1 integer read-only
A list of agentMibCapabilityDescr entries.
                       agentMibCapabilityDescr 1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.2 displaystring read-only
The name of the MIB supported by the agent.
                       agentMibCapabilityVersion 1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.3 integer read-only
The version of the MIB specified in this entry.
                       agentMibCapabilityType 1.3.6.1.4.1.326.2.20.1.11.1.1.5.1.4 integer read-only
The type of the MIB specified in this entry. Enumeration: 'other': 1, 'proprietary': 3, 'experiment': 4, 'standard': 2.
               agentMgmtRole 1.3.6.1.4.1.326.2.20.1.11.1.1.6 integer read-only
The role of this agent within this particular switch structure . Enumeration: 'backup-master': 3, 'other': 1, 'primary-master': 2.
           agentBasicConfig 1.3.6.1.4.1.326.2.20.1.11.1.2
               agentFirmwareFile 1.3.6.1.4.1.326.2.20.1.11.1.2.1 displaystring read-write
The name of the firmware file to be downloaded.
               agentFirmwareSourceAddr 1.3.6.1.4.1.326.2.20.1.11.1.2.2 ipaddress read-write
The ip address where new firmware file is located on.
               agentFirmwareUpdateCtrl 1.3.6.1.4.1.326.2.20.1.11.1.2.3 integer read-write
while this object is set to 'activate', FTP download is working immediately, and agentFirmwareUpdateState is changed to 'in-process'. The agent always returns 'other' while it is read. Enumeration: 'other': 1, 'activate': 2.
               agentFirmwareUpdateState 1.3.6.1.4.1.326.2.20.1.11.1.2.4 integer read-only
status of firmware download control. If the value is 'other', means never firmware updated since device started up. Enumeration: 'invalid-file': 3, 'in-process': 2, 'complete': 7, 'violation': 4, 'other': 1, 'file-not-found': 5, 'time-out': 8, 'disk-full': 6.
               agentFirmwareLastUpdateTime 1.3.6.1.4.1.326.2.20.1.11.1.2.5 timeticks read-only
record the sysUptime for last active agentFirmwareUpdateCtrl. Default is set to 0.
               agentSystemReset 1.3.6.1.4.1.326.2.20.1.11.1.2.6 integer read-write
This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to warm-start(2) will reset the agent. The agent always returns no-reset(3) when this object is read. Enumeration: 'other': 1, 'no-reset': 3, 'warm-start': 2.
               agentRs232PortConfig 1.3.6.1.4.1.326.2.20.1.11.1.2.7 integer read-write
This object indicates the RS-232C mode while device restart. Enumeration: 'other': 1, 'console': 2, 'out-of-band': 3.
               agentOutOfBandBaudRateConfig 1.3.6.1.4.1.326.2.20.1.11.1.2.8 integer read-write
This object indicates the out_of_band baud rate while device restart. Enumeration: 'baudRate-2400': 2, 'baudRate-38400': 5, 'other': 1, 'baudRate-9600': 3, 'baudRate-19200': 4.
           agentIpProtoConfig 1.3.6.1.4.1.326.2.20.1.11.1.3
               agentIpNumOfIf 1.3.6.1.4.1.326.2.20.1.11.1.3.1 integer read-only
The total number of IP interfaces supported by this agent.
               agentIpIfTable 1.3.6.1.4.1.326.2.20.1.11.1.3.2 no-access
A list of IP interface entries supported by the agent.
                   agentIpIfEntry 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1 no-access
An agentIPIfEntry contains information about a particular IP interface.
                       agentIpIfIndex 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.1 integer read-only
This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf .
                       agentIpIfAddress 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.2 ipaddress read-only
The IP address of the interface .
                       agentIpIfNetMask 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.3 ipaddress read-only
The IP net mask for this interface .
                       agentIpIfDefaultRouter 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.4 ipaddress read-only
The default gateway for this IP interface.
                       agentIpIfMacAddr 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.5 physaddress read-only
The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of zero length.
                       agentIpIfType 1.3.6.1.4.1.326.2.20.1.11.1.3.2.1.6 integer read-only
The physical layer interface of the IP interface. Enumeration: 'ethernet-csmacd': 6, 'other': 1, 'slip': 28.
               agentIpBootServerAddr 1.3.6.1.4.1.326.2.20.1.11.1.3.3 ipaddress read-write
The IP Address of Boot Server.
               agentIpGetIpFromBootpServer 1.3.6.1.4.1.326.2.20.1.11.1.3.4 integer read-write
This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. Enumeration: 'disabled': 2, 'dhcp': 4, 'other': 1, 'bootp': 3.
               agentIpUnauthAddr 1.3.6.1.4.1.326.2.20.1.11.1.3.5 ipaddress read-only
The IP address of an unauthorized SNMP packet.
               agentIpUnauthComm 1.3.6.1.4.1.326.2.20.1.11.1.3.6 displaystring read-only
The community string of an unauthorized SNMP packet.
               agentIpTrapManagerTable 1.3.6.1.4.1.326.2.20.1.11.1.3.9 no-access
A list of trap manager entries to which to send SNMP traps .
                   agentIpTrapManagerEntry 1.3.6.1.4.1.326.2.20.1.11.1.3.9.1 no-access
This entry contains the particular trap manager settings.
                       agentIpTrapManagerIpAddr 1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.1 ipaddress read-only
The IP address to receive SNMP traps from this device.
                       agentIpTrapManagerComm 1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.2 displaystring read-only
The community string of the SNMP trap packet sent to the trap manager.
                       agentIpTrapManagerStatus 1.3.6.1.4.1.326.2.20.1.11.1.3.9.1.3 integer read-only
This object indicates whether or not the trap should be send to this trap manager. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
               agenMaxManagerIp 1.3.6.1.4.1.326.2.20.1.11.1.3.10 integer read-only
Maximum number of entries in the management ip security table (agentManagerIpSecurityTable).
               agenCurrtManagerIp 1.3.6.1.4.1.326.2.20.1.11.1.3.11 integer read-only
Current applied number of entries in the management ip security table .
               agentManagerIpSecurityTable 1.3.6.1.4.1.326.2.20.1.11.1.3.12 no-access
A table that contains information about security management ip . When the table is empty , the device permit any ip to manage the device . If the table is'nt empty , it will only permit the same destination address to manage the device .
                     agentManagerIpSecurityEntry 1.3.6.1.4.1.326.2.20.1.11.1.3.12.1 no-access
An entry containing a security ip address for a particular security request .
                         agentManagerIpSecurityAddr 1.3.6.1.4.1.326.2.20.1.11.1.3.12.1.1 ipaddress read-only
The IP address for the security request .
                         agentManagerIpSecurityStatus 1.3.6.1.4.1.326.2.20.1.11.1.3.12.1.2 integer read-only
This object indicates the security ip address status . To writing disabled value to the object, and then the corresponding entry will be removed from the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.