DLINK-DXS-1210-10TS-AX-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK

Home	MIB: DLINK-DXS-1210-10TS-AX-MIB
Download as:		SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, INET-ADDRESS-MIB, IANA-ADDRESS-FAMILY-NUMBERS-MIB, BRIDGE-MIB, SNMPv2-TC, DIFFSERV-DSCP-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
d_link	1.3.6.1.4.1.171
dlink_products	1.3.6.1.4.1.171.10
dlink_DXS1210SeriesProd	1.3.6.1.4.1.171.10.139
dxs_1210_10ts	1.3.6.1.4.1.171.10.139.2
dxs_1210_10ts_AX	1.3.6.1.4.1.171.10.139.2.1
dlinkDeviceInfo	1.3.6.1.4.1.171.10.139.2.1.1
deviceInfoGroup	1.3.6.1.4.1.171.10.139.2.1.1.1
deviceInformation	1.3.6.1.4.1.171.10.139.2.1.1.1.1
deviceInfoDeviceType	1.3.6.1.4.1.171.10.139.2.1.1.1.1.1	displaystring	read-only	Device Information. Device Type
deviceInfoBootPROMVersion	1.3.6.1.4.1.171.10.139.2.1.1.1.1.2	displaystring	read-only	Device Information. Boot PROM Version
deviceInfoFirmwareVersion	1.3.6.1.4.1.171.10.139.2.1.1.1.1.3	displaystring	read-only	Device Information. Firmware Version
deviceInfoHardwareVersion	1.3.6.1.4.1.171.10.139.2.1.1.1.1.4	displaystring	read-only	Device Information. Hardware Version
deviceInfoMACAddress	1.3.6.1.4.1.171.10.139.2.1.1.1.1.5	macaddress	read-only	Device Information. MAC Address
deviceInfoSystemTime	1.3.6.1.4.1.171.10.139.2.1.1.1.1.6	displaystring	read-only	Device Information. System Time
deviceInfoSerialNumber	1.3.6.1.4.1.171.10.139.2.1.1.1.1.7	displaystring	read-only	Device Information. Serial Number
deviceSwitchCPULast5SecUsage	1.3.6.1.4.1.171.10.139.2.1.1.1.1.8	integer32	read-only	Indicates the average CPU usage in last 5 second of the switch in percentage
deviceFunction	1.3.6.1.4.1.171.10.139.2.1.1.1.2
firmwareInformationTable	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1		no-access	The table of Firmware Information.
firmwareInformationEntry	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1		no-access	The list ofFirmware Information entry.
firmwareInfoImageID	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.1	integer32	read-only	Firmware Information. Image ID.
firmwareInfoVersion	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.2	displaystring	read-only	Firmware Information. Version.
firmwareInfoSizeB	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.3	unsigned32	read-only	Firmware Information. Size B.
firmwareInfoUpdateTime	1.3.6.1.4.1.171.10.139.2.1.1.1.2.1.1.4	displaystring	read-only	Firmware Information. Update Time.
devFunFwUpgradeAndBackup	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2
devFunFwServerIpAddrType	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.1	inetaddresstype	read-write	Address type of IP Address of the remote system to which the switch file have to be transfer.
devFunFwServerIpvxAddr	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.2	inetaddress	read-write	IP Address of the remote system to which the switch file have to be transfer.
devFunFwServerInterfaceName	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.3	octet string	read-write	Specifies the interface name when the cmFwServerIpvxAddr is linklocal address.
devFunFwSrcFilename	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.4	displaystring	read-write	Configure firmware filename to download or upload.
devFunFwOperation	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.5	integer	read-write	The operates to perform download or upload file to the unit. This object is used in conjunction with Ip and FileName. Enumeration: 'download': 1, 'none': 0, 'upload': 2.
devFunFwOperationStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.6	integer	read-only	The current operation status of file upload or download. Enumeration: 'transmit': 4, 'failure': 2, 'none': 0, 'progressing': 3, 'success': 1.
devFunFwTransferPercentage	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.7	integer	read-only	The file transfer percentage of the file upload or download.
devFunFwRetryCount	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.8	integer32	read-write	The number of retry when upgrade fail.
devFunFwServerStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.9	integer	read-only	The current operation status of file upload or download. Enumeration: 'fileexists': 5, 'readfail': 8, 'connecthostfail': 6, 'accessViolation': 3, 'writefail': 9, 'serverfail': 13, 'internalerror': 1, 'programming': 14, 'memoryfull': 4, 'buffertoosmall': 12, 'invalidarg': 7, 'createfilefail': 10, 'ok': 0, 'filetoohuge': 11, 'nofileerror': 2.
devFwOperationImageId	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.10	integer32	read-write	The image ID need to upgrade.
devFwNextBootImageId	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.11	integer32	read-write	The image ID when next boot up.
devFwActualBootImageId	1.3.6.1.4.1.171.10.139.2.1.1.1.2.2.12	integer32	read-only	The image ID that current boot-up.
devFunConfigInfo	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3
devFunCfgInfoTable	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1		no-access	A list of configuration entries.
devFunCfgInfoEntry	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1		no-access	A list of configuration entries.
devFunCfgId	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.1	integer	read-only	A unique value, greater than zero, for each configuration id.
devFunCfgSize	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.2	integer	read-only	The configuration file size by id. Enumeration: 'disabled': 2, 'enabled': 1.
devFunCfgUpdateTime	1.3.6.1.4.1.171.10.139.2.1.1.1.2.3.1.1.3	displaystring	read-only	The configuration last update time by id.
devFunConfiguration	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4
devFunCfgServerIpAddrType	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.1	inetaddresstype	read-write	Address type of IP Address of the remote system to which the switch file have to be transfer.
devFunCfgServerIpvxAddr	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.2	inetaddress	read-write	IP Address of the remote system to which the switch file have to be transfer.
devFunCfgSrcFilename	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.3	displaystring	read-write	Configure firmware filename to download or upload.
devFunCfgStartUpConfigID	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.4	integer	read-write	This object is used to select the restore configuration id. Enumeration: 'config1': 1, 'config2': 2.
devFunCfgOperConfigID	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.5	integer	read-write	This object is used to select the operate configuration id for restore or backup. Enumeration: 'config1': 1, 'config2': 2.
devFunCfgOperation	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.6	integer	read-write	The operates to perform download or upload file, download means transfer file from server to dut, upload means transfer file from dut to server. Enumeration: 'download': 1, 'none': 0, 'upload': 2.
devFunCfgSave	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.7	integer	read-write	Save current configuration to file. Enumeration: 'disabled': 2, 'enabled': 1.
devFunCfgOperationStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.8	integer	read-only	The current operation status of file upload or download. Enumeration: 'transmit': 4, 'failure': 2, 'none': 0, 'progressing': 3, 'success': 1.
devFunCfgTransferPercentage	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.9	integer	read-only	The file transfer percentage of the file upload or download.
devFunCfgServerInterfaceName	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.10	octet string	read-only	Specifies the interface name when the cmCfgServerIpvxAddr is linklocal address.
devFunCfgServerStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.11	integer	read-only	The current operation status of file upload or download. Enumeration: 'fileexists': 5, 'readfail': 8, 'connecthostfail': 6, 'accessViolation': 3, 'writefail': 9, 'serverfail': 13, 'internalerror': 1, 'programming': 14, 'memoryfull': 4, 'buffertoosmall': 12, 'invalidarg': 7, 'createfilefail': 10, 'ok': 0, 'filetoohuge': 11, 'nofileerror': 2.
devFunCfgCurrStartUpConfigID	1.3.6.1.4.1.171.10.139.2.1.1.1.2.4.12	integer	read-only	This object is used to refer to the startup configuration id. Enumeration: 'config1': 1, 'config2': 2.
devFunLogBackup	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5
devFunLogBackupToTftpIpType	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5.1	integer	read-write	Type of IP interface. Enumeration: 'ipv4': 1, 'ipv6': 2.
devFunLogBackupToTftpIpAddr	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5.2	inetaddress	read-write	The TFTP server's IP address is used to download Log file.
devFunLogBackupToTftpDestURL	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5.3	displaystring	read-write	The Log filename is used to download to the tftp client.
devFunLogBackupToTftpOper	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5.4	integer	read-write	The operate to backup log. Enumeration: 'true': 1, 'false': 0.
devFunLogBackupToTftStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.5.5	integer	read-only	The backup log status. Enumeration: 'failure': 2, 'none': 0, 'progressing': 3, 'success': 1.
devFunPing	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6
devPingDestIpType	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.1	integer	read-write	The IP address type of the node to be pinged. Enumeration: 'ipv4': 1, 'ipv6': 2.
devPingDestIpAddr	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.2	inetaddress	read-write	The IP address of the node to be pinged, set ip type before set it.
devPingTimeout	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.3	integer32	read-write	The time in seconds after which the entity waiting for the ping response times out.
devPingTimes	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.4	integer32	read-write	The number of times the given node address is to be pinged. value 0 for infinite times.
devPingStart	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.5	integer	read-write	The ping event of ping operate. Enumeration: 'disabled': 2, 'enabled': 1.
devPingStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.6	integer	read-only	The current status of the Ping operate Enumeration: 'progress': 2, 'completed': 3, 'notinitiated': 1.
devPingSuccesses	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.7	integer32	read-only	The number of ping responses received.
devPingV4ProbeHistoryTable	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8		no-access	Defines a table for storing the results of ping operations. The number of entries in this table is limited per entry in the fsipv6PingTable by the value of the corresponding cmPingProbeMaxRow object. An implementation of this MIB will remove the oldest entry in the cmPingProbeHistoryTable of the corresponding entry in the cmPingProbeMaxRow to allow the addition of an new entry once the number of rows in the cmPingProbeHistoryTable reaches the value specified by pingCtlMaxRows for the corresponding entry in the cmPingProbeMaxRow.
devPingV4ProbeHistoryEntry	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1		no-access	Defines an entry in the cmPingProbeHistoryTable. The first index elements identify the Probe history entry that a fsPingTable belongs to. The second index element selects a single probe result.
devPingIndex	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.1	integer	read-only	The index identify the Probe history entry that fsPingTable belongs to
devPingProbeIndex	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.2	integer	read-only	The probe history sequence of this entry belong to
devPingProbeHistoryResponseTime	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.8.1.3	unsigned32	read-only	The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
devIpv6PingProbeHistoryTable	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9		no-access	Defines a table for storing the results of ping operations. The number of entries in this table is limited per entry in the fsipv6PingTable by the value of the corresponding cmIpv6PingProbeMaxRow object. An implementation of this MIB will remove the oldest entry in the cmIpv6PingProbeHistoryTable of the corresponding entry in the cmIpv6PingProbeMaxRow to allow the addition of an new entry once the number of rows in the cmIpv6PingProbeHistoryTable reaches the value specified by pingCtlMaxRows for the corresponding entry in the cmIpv6PingProbeMaxRow.
devIpv6PingProbeHistoryEntry	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1		no-access	Defines an entry in the cmIpv6PingProbeHistoryTable. The first index elements identify the Probe history entry that a fsIpv6PingTable belongs to. The second index element selects a single probe result.
devIpv6PingIndex	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.1	integer	read-only	The index identify the Probe history entry that fsIpv6PingTable belongs to
devIpv6PingProbeIndex	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.2	integer	read-only	The probe history sequence of this entry belong to
devIpv6PingProbeHistoryResponseTime	1.3.6.1.4.1.171.10.139.2.1.1.1.2.6.9.1.3	unsigned32	read-only	The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
devFunLangMgmt	1.3.6.1.4.1.171.10.139.2.1.1.1.2.7
devFunLangMgmtFile	1.3.6.1.4.1.171.10.139.2.1.1.1.2.7.1	displaystring	read-write	Language Management. Language File
devFunLangMgmtApply	1.3.6.1.4.1.171.10.139.2.1.1.1.2.7.2	truthvalue	read-write	Language Management. Apply
devFunRestart	1.3.6.1.4.1.171.10.139.2.1.1.1.2.8	integer	read-write	This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. This objects also allows user to reset swith(all configuration set to default) and reset switch without ip(except ip configuration saved, configuration set to default) and reset switch without ip and vlan(except ip and vlan configuration saved, configuration set to default) When the switch operationally goes down, configuration save operation is initiated based on the configuration save option chosen. When the switch operationally come up, the saved configurations are restored based on the restore option chosen. Once the switch is restarted, the value of this object reverts to noreboot. Enumeration: 'reset': 3, 'resetwithoutip': 4, 'reboot': 2, 'noreboot': 1.
devFunWizardIgnoreNextTime	1.3.6.1.4.1.171.10.139.2.1.1.1.2.9	integer	read-write	This object indicates Smart Wizard ignore next time or not. Enumeration: 'disabled': 2, 'enabled': 1.
deviceErrorCodeInformation	1.3.6.1.4.1.171.10.139.2.1.1.1.3
deviceErrorCodeTable	1.3.6.1.4.1.171.10.139.2.1.1.1.3.1		no-access	A table to control the port specific parameters of the device like speed, duplex mode, etc.
deviceErrorCodeEntry	1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1		no-access	An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
devErrorCodeIndex	1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1.1	integer32	read-only	Error code index.
devErrorString	1.3.6.1.4.1.171.10.139.2.1.1.1.3.1.1.2	displaystring	read-only	The error string of the index.
deviceFan	1.3.6.1.4.1.171.10.139.2.1.1.1.4
deviceFanStatus	1.3.6.1.4.1.171.10.139.2.1.1.1.4.1	integer	read-only	Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the thermal sensor's status is ok or not , if the status is Enable ,that means the smartfan module will be on work ,it will detect the thermal sensor and send status change log. Enumeration: 'fail': 1, 'ok': 0.
dlinkSystem	1.3.6.1.4.1.171.10.139.2.1.2
sysInformationGroup	1.3.6.1.4.1.171.10.139.2.1.2.1
systemName	1.3.6.1.4.1.171.10.139.2.1.2.1.1	displaystring	read-write	System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character: ( ) V + _ = .
systemLocation	1.3.6.1.4.1.171.10.139.2.1.2.1.2	displaystring	read-write	The location name of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
systemContact	1.3.6.1.4.1.171.10.139.2.1.2.1.3	displaystring	read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
syslogGroup	1.3.6.1.4.1.171.10.139.2.1.2.4
syslogMIBObjects	1.3.6.1.4.1.171.10.139.2.1.2.4.1
syslogGeneral	1.3.6.1.4.1.171.10.139.2.1.2.4.1.1
syslogSourceInterfaceState	1.3.6.1.4.1.171.10.139.2.1.2.4.1.1.1	integer	read-write	This object indicates the source address of the SYSLOG packet should be assign or not. If enable, the VLAN ID of the interface whose IP address will be used as the source address for sending the SYSLOG packet. If disable, the IP address of the closest interface will be used. Enumeration: 'disabled': 2, 'enabled': 1.
syslogSourceInterfaceVID	1.3.6.1.4.1.171.10.139.2.1.2.4.1.1.2	integer32	read-write	This object indicates the VLAN ID of the interface whose IP address will be used as the source address for sending the SYSLOG packet.
syslogLogbuffer	1.3.6.1.4.1.171.10.139.2.1.2.4.1.2
syslogClearLogBuffer	1.3.6.1.4.1.171.10.139.2.1.2.4.1.2.1	truthvalue	read-write	Clears the buffered logs. This object is set to 'false' by default. When set to 'True', the buffered logs will be cleared and the value of this object will become 'false' again.
syslogLogBufferEnabled	1.3.6.1.4.1.171.10.139.2.1.2.4.1.2.2	integer	read-write	This object indicates the state of logging system messages to the local buffer. Messages must enter the local message buffer first before it can be further dispatched to other destinations. Enumeration: 'enable': 1, 'disable': 2.
syslogLogBufSeverity	1.3.6.1.4.1.171.10.139.2.1.2.4.1.2.3	integer	read-write	This object indicates the severity level of system messages. The messages at that severity level or a more severe level will be logged to message buffers. Enumeration: 'debugging': 7, 'errors': 3, 'warnings': 4, 'alerts': 1, 'emergencies': 0, 'notifications': 5, 'critical': 2, 'informational': 6.
syslogLogBufWriteDelay	1.3.6.1.4.1.171.10.139.2.1.2.4.1.2.4	integer32	read-write	This object indicates the interval for periodic writing of the logging buffer to FLASH. The valid value is N to 65535. N is project dependent. The default interval is 300 seconds. Setting this object to -1 means infinite which will disable periodical writing logging buffer to FLASH. Setting this object to 0 means writing logging buffer to flash by trigger way.
syslogServerTable	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5		no-access	A table consists of a list of SYSLOG servers to log system messages and debug output to a remote SYSLOG server host.
syslogServerEntry	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1		no-access	An entry defines information for a SYSLOG server.
syslogServerIndex	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.1	integer32	read-only	the server config entry index.
syslogServerAddressType	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.2	inetaddresstype	read-write	This object indicates the type of the server address.
syslogServerAddress	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.3	inetaddress	read-write	This object indicates the IP or IPv6 address of the SYSLOG server.
syslogServerPort	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.4	integer	read-write	This object indicates the UDP port number to be used for the SYSLOG server.
syslogServerSeverity	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.5	integer	read-write	This object indicates the severity of log messages that will be sent to the server. Enumeration: 'debugging': 7, 'notification': 5, 'alerts': 1, 'emergencie': 0, 'warning': 4, 'critical': 2, 'error': 3, 'informational': 6.
syslogServerFacility	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.6	integer	read-write	Specifies the logging facility of the log host. Enumeration: 'cron2': 15, 'cron': 9, 'syslog': 5, 'local4': 20, 'ftp': 11, 'uucp': 8, 'console': 14, 'mail': 2, 'authpriv': 10, 'ntp': 12, 'auth': 4, 'user': 1, 'local5': 21, 'news': 7, 'local7': 23, 'local6': 22, 'local1': 17, 'local0': 16, 'local3': 19, 'local2': 18, 'audit': 13, 'daemon': 3, 'lpr': 6, 'kern': 0.
syslogServerRowstatus	1.3.6.1.4.1.171.10.139.2.1.2.4.1.5.1.7	rowstatus	read-only	The row status variable, used according to installation and removal conventions for conceptual rows.
syslogBufferTableNum	1.3.6.1.4.1.171.10.139.2.1.2.4.1.6	unsigned32	read-only	This object indicates the number of entries presented in the syslogBufferTable.
syslogBufferTable	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7		no-access	A table consists of a list of system log messages.
syslogBufferEntry	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1		no-access	An entry defines a log message.
syslogBufferIndex	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.1	unsigned32	read-only	An index that uniquely identifies the message.
syslogBufferDateAndTime	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.2	displaystring	read-only	The date and time when the message is logged.
syslogBufferDescription	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.3	displaystring	read-only	The content of the log message.
syslogBufferSeverity	1.3.6.1.4.1.171.10.139.2.1.2.4.1.7.1.4	integer	read-only	This object indicates the severity of log messages that will be sent to the server. Enumeration: 'debugging': 7, 'notification': 5, 'alerts': 1, 'emergencie': 0, 'warning': 4, 'critical': 2, 'error': 3, 'informational': 6.
sysPortConfigGroup	1.3.6.1.4.1.171.10.139.2.1.2.13
portCtrlTable	1.3.6.1.4.1.171.10.139.2.1.2.13.1		no-access	A table to control the port specific parameters of the device like speed, duplex mode, etc.
portCtrlEntry	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1		no-access	An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
portSetIndex	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.1	integer32	read-only	Interface index of the port for the configuration in this entry applies.
portSetMediaType	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.2	integer	read-only	Media Type. Enumeration: 'copper': 1, 'fiber': 2.
portSetState	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.3	integer	read-write	Enables / disables Port state. Enumeration: 'enable': 1, 'disable': 2.
portSetAutoDowngrade	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.4	integer	read-write	Enables / disables auto downgrade for the interface. Enumeration: 'enable': 1, 'disable': 2.
portSetFlowControl	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.5	integer	read-write	On / off flow control for the interface. Enumeration: 'on': 1, 'off': 2.
portSetDuplex	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.6	integer	read-write	Configures port settings auto/half/full mode. Enumeration: 'auto': 1, 'full': 2.
portSetSpeed	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.7	integer	read-write	Configures port settings speed. Enumeration: 'rate100M': 2, 'auto': 1, 'rate1000M-Slave': 5, 'rate1000M-Master': 4, 'rate1000M': 3, 'rate10G': 6.
portSetCapaAdvertised	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.8	integer	read-write	Configures port settings interface capability advertised 100M/1000M/10G . Enumeration: 'adv1G_10G': 6, 'adv100M': 1, 'adv10G': 4, 'adv1G': 2, 'adv100M_1G': 3, 'adv100M_1G_10G': 7, 'adv100M_10G': 5.
portSetDescription	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.9	displaystring	read-write	Configures port settings Description.
portSetLinkStatus	1.3.6.1.4.1.171.10.139.2.1.2.13.1.1.10	integer	read-only	Show port settings LinkStatus up /down. Enumeration: 'down': 2, 'up': 1.
portStatusTable	1.3.6.1.4.1.171.10.139.2.1.2.13.2		no-access	A table to control the port specific parameters of the device like speed, duplex mode, etc.
portStatusEntry	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1		no-access	An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
portStaIndex	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.1	integer32	read-only	Interface index of the port for the configuration in this entry applies.
portStaMediaType	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.2	integer	read-only	Media Type. Enumeration: 'copper': 1, 'fiber': 2.
portStaStatus	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.3	integer	read-only	Show port status Link Status up /down. Enumeration: 'notconnected': 2, 'connected': 1.
portStaMacAddr	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.4	macaddress	read-only	Show port status MAC Address.
portStaVlan	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.5	integer	read-only	The VLAN-ID assigned to untagged frames received on this port. The port in native VLAN will also been set as untagged as default setting.
portStaFlowCtrlOpSend	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.6	integer	read-only	On / off flow control Operator Send for the interface. Enumeration: 'on': 1, 'off': 2.
portStaFlowCtrlOpRece	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.7	integer	read-only	On / off flow control Operator Receive for the interface. Enumeration: 'on': 1, 'off': 2.
portStaDuplex	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.8	integer	read-only	Show port Status Duplex auto/full mode. Enumeration: 'auto': 1, 'auto-falf': 4, 'full': 2, 'auto-full': 3.
portStaSpeed	1.3.6.1.4.1.171.10.139.2.1.2.13.2.1.9	integer	read-only	Show port Status speed. Enumeration: 'rate100M': 2, 'auto': 1, 'auto-rate1000M': 8, 'rate1000M-Slave': 5, 'rate1000M-Master': 4, 'auto-rate10G': 9, 'rate1000M': 3, 'rate10G': 6, 'auto-rate100M': 7.
errDisAssertTrapState	1.3.6.1.4.1.171.10.139.2.1.2.13.3	integer	read-write	This object control whether sending trap or not when port entering into Err Disable state. Enumeration: 'disabled': 2, 'enabled': 1.
errDisClearTrapState	1.3.6.1.4.1.171.10.139.2.1.2.13.4	integer	read-write	This object control whether sending trap or not when port exiting from Err Disable state. Enumeration: 'disabled': 2, 'enabled': 1.
errDisNotificationRate	1.3.6.1.4.1.171.10.139.2.1.2.13.5	integer	read-write	Expressed in the number of notifications can be generated per minute. This object configures the rate-limit of SNMP Notification for errDisable feature. A value of 0 indicates that an SNMP Notification is generated for every error disabled event.
errDisIfStatusTable	1.3.6.1.4.1.171.10.139.2.1.2.13.6		no-access	The Port Error Disable table.
errDisIfStatusEntry	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1		no-access	A list of information for the err port of the device.
errDisIfStatusPortIndex	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.1	integer	read-only	This object is the interface index of the interface disabled by a feature.
errDisIfStatusVlanIndex	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.2	integer	read-only	This object indicates the VLAN in the given interface that has been error-disabled.
errDisPortState	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.3	integer	read-only	This object decides whether the port state is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
errDisPortConnectStatus	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.4	integer	read-only	This object decides whether the PortStatus is err-disabled. Enumeration: 'other': 1, 'err-disabled': 2.
errDisPortReason	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.5	integer	read-only	This object indicats the reason for Port Error Disable event occur. Enumeration: 'portsecurity': 1, 'stormControl': 2, 'bpduRateLimit': 4, 'arpRateLimit': 3, 'loopbackDetect': 6, 'dhcpRateLimit': 5.
errDisPortRecoveryTimeLeft	1.3.6.1.4.1.171.10.139.2.1.2.13.6.1.6	integer	read-only	This object indicats the remaining time for Port Error Disable state recovery.
errDisRecoveryTable	1.3.6.1.4.1.171.10.139.2.1.2.13.7		no-access	This table contains the recovery mechanism for the features with error-disable functionality.
errDisRecoveryEntry	1.3.6.1.4.1.171.10.139.2.1.2.13.7.1		no-access	An entry is created for each feature which has error-disable functionality.
errDisRecoveryReason	1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.1	integer	read-only	This object indicates the cause of error-disable. Enumeration: 'portsecurity': 1, 'stormControl': 2, 'bpduRateLimit': 4, 'arpRateLimit': 3, 'loopbackDetect': 6, 'dhcpRateLimit': 5.
errDisRecoveryStatus	1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.2	integer	read-write	This object specifies whether the system can automatically recover a system entity that has been disabled by the cause. Enumeration: 'disabled': 2, 'enabled': 1.
errDisRecoveryInterval	1.3.6.1.4.1.171.10.139.2.1.2.13.7.1.3	integer	read-write	Specifies the error-recovery time interval on specific cause to recover the port/interface from the error disabled situation.
errDisTraps	1.3.6.1.4.1.171.10.139.2.1.2.13.8
errDisTrapsList	1.3.6.1.4.1.171.10.139.2.1.2.13.8.0
errDisNotifyPortDisabledAssert	1.3.6.1.4.1.171.10.139.2.1.2.13.8.0.1			The trap is sent when a port enters into error disabled state.
errDisNotifyPortDisabledClear	1.3.6.1.4.1.171.10.139.2.1.2.13.8.0.2			The trap is sent when a port recovery from error disabled state.
errDisNotifyVlanDisabledAssert	1.3.6.1.4.1.171.10.139.2.1.2.13.8.0.3			The trap is sent when a Port with a VID loop occurs.
errDisNotifyVlanDisabledClear	1.3.6.1.4.1.171.10.139.2.1.2.13.8.0.4			The trap is sent when a Port with a VID restarts after the interval time.
jumboFrameTable	1.3.6.1.4.1.171.10.139.2.1.2.13.14		no-access	A table to control the port specific parameters of the device like speed, duplex mode, etc.
jumboFrameEntry	1.3.6.1.4.1.171.10.139.2.1.2.13.14.1		no-access	An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
portIndex	1.3.6.1.4.1.171.10.139.2.1.2.13.14.1.1	integer32	read-only	Interface index of the port for the configuration in this entry applies.
maxReceFrameSize	1.3.6.1.4.1.171.10.139.2.1.2.13.14.1.2	integer32	read-write	Interface index of the port for the configuration in this entry applies.
sysSNTPSettingGroup	1.3.6.1.4.1.171.10.139.2.1.2.17
sntpClockSettings	1.3.6.1.4.1.171.10.139.2.1.2.17.1
sntpTimeSeconds	1.3.6.1.4.1.171.10.139.2.1.2.17.1.1	integer32	read-write	This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 2009). Notice : input value must larger than 284083276 (00:00:00 UTC, January 1, 2009) and smaller than 1136073599 (23:59:59 UTC, December 31, 2035).
sntpTimeZoneSettings	1.3.6.1.4.1.171.10.139.2.1.2.17.2
sntpSummerTimeState	1.3.6.1.4.1.171.10.139.2.1.2.17.2.1	integer	read-write	This object indicates the mode of the system to automatically switch to Summer Time (Daylight Saving Time). disable(1) - The Daylight Saving Time feature is disabled. recurring(2) - The Daylight Saving Time feature is enabled. The Summer Time should start and end on the specified week day of the specified month. format [weekofmonth-weekofday-month,HH:MM]. Example:- Third-Mon-Apr,17:30 date(3) - The Daylight Saving Time feature is enabled. The Summer Time should start and end on the specified date of the specified month. format [dayofmonth-month,HH:MM]. Example:- 01-Apr,17:30. Enumeration: 'date': 3, 'disable': 1, 'recurring': 2.
sntpGMTMinutes	1.3.6.1.4.1.171.10.139.2.1.2.17.2.2	integer	read-write	Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)
sntpSummerTimeStart	1.3.6.1.4.1.171.10.139.2.1.2.17.2.3	displaystring	read-write	This object indicates when the Summer Time starts. This value is always interpreted within the context of a sntpSummerTimeState value.
sntpSummerTimeEnd	1.3.6.1.4.1.171.10.139.2.1.2.17.2.4	displaystring	read-write	This object indicates when the Summer Time ends. This value is always interpreted within the context of a sntpSummerTimeState value.
sntpSummerTimeOffset	1.3.6.1.4.1.171.10.139.2.1.2.17.2.5	integer	read-write	The value of this object indicates number of minutes to add or to subtract during Summer Time. This object is not meaningful when sntpSummerTimeState object is 'disable'.
sntpSNTPSettings	1.3.6.1.4.1.171.10.139.2.1.2.17.3
sntpGlobalState	1.3.6.1.4.1.171.10.139.2.1.2.17.3.1	integer	read-write	Enable/Disable SNTP function in the system. Enumeration: 'disabled': 2, 'enabled': 1.
sntpPollInterval	1.3.6.1.4.1.171.10.139.2.1.2.17.3.2	integer32	read-write	SNTP Poll Interval In Seconds (30-99999)
sntpServerTable	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3		no-access	The table contains configured SNTP/NTP servers in the system.
sntpServerEntry	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1		no-access	Each entry in the table contains necessary information to send SNTP request to the servers.
sntpServerAddrType	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.1	integer	read-only	The IP address type ipv4 or ipv6. Enumeration: 'ipv4': 1, 'ipv6': 2.
sntpServerAddr	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.2	inetaddress	read-only	The unicast IPv4/IPv6 server address in the Unicast Addressing mode
sntpServerStratum	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.3	integer	read-only	stratum levels define the distance from the reference clock.
sntpServerVersion	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.4	integer	read-only	sntp server version.
sntpServerLastReceive	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.5	timeticks	read-only	The value of sysUpTime when this server was synced.
sntpServerSynced	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.6	truthvalue	read-only	This object indicates whether the corresponding server is the current synced server.
sntpServerRowStatus	1.3.6.1.4.1.171.10.139.2.1.2.17.3.3.1.7	rowstatus	read-write	The activation of a row adds server entry. The destruction of a row removes server entry
sysTimeRangeGroup	1.3.6.1.4.1.171.10.139.2.1.2.38
timeRangeTable	1.3.6.1.4.1.171.10.139.2.1.2.38.1		no-access	A table to configure time Range in the system.
timeRangeEntry	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1		no-access	A schedule entry to configure time Range in the system.
timeRangeName	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.1	displaystring	read-only	The Schedule name associated with the Schedule entry (e.g., `abc, bbb').
timeRangeIndex	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.2	integer32	read-only	The Time Range identifier. The maximum number of Schedule entry is the number of ports supported PoE function. The value must be between 1 and 52.
timeRangeStartHour	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.3	integer32	read-write	Start hour of the Schedule entry. The value must be from 0 to 23.
timeRangeStartMinute	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.4	integer32	read-write	Start minute of the Schedule entry. The value must be from 0 to 59.
timeRangeEndHour	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.5	integer32	read-write	End hour of the Schedule entry. The value must be from 0 to 23.
timeRangeEndMinute	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.6	integer32	read-write	End minute of the Schedule entry. The value must be from 0 to 59.
timeRangeWeekday	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.7	bits	read-write	Enable/Disble scheduling weekday list. Bits: 'monday': 5, 'tuesday': 4, 'friday': 1, 'wednesday': 3, 'thursday': 2, 'sunday': 6, 'saturday': 0.
timeRangeRowStatus	1.3.6.1.4.1.171.10.139.2.1.2.38.1.1.8	rowstatus	read-only	The status of an entry in the Time Range Information Table. Only a subset of the rowstatus variables (active, notinservice, createAndWait, destroy) are available.
dlinkManagement	1.3.6.1.4.1.171.10.139.2.1.3
mgtUserAccountGroup	1.3.6.1.4.1.171.10.139.2.1.3.1
userAccountsManagementSettings	1.3.6.1.4.1.171.10.139.2.1.3.1.1
userAccountsTable	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1		no-access	A table to User Accounts Settings. User Management Settings.
userAccountsEntry	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1		no-access	An entry appears in User Accounts Settings. User Management Settings.
userName	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.1	snmpadminstring	read-only	The name of user entry.
userPrivilege	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.2	unsigned32	read-write	User Management Settings. Privilege (1-15)
userEncryptControl	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.3	integer	read-write	Enable or disable Encrypt of user password. Enumeration: 'disable': 2, 'enabled': 1.
userPassword	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.4	displaystring	read-write	The password of user entry. 0 means no password.
userRowStatus	1.3.6.1.4.1.171.10.139.2.1.3.1.1.1.1.5	rowstatus	read-write	Row Status of user Accounts Entry.
userAccountsSessionTable	1.3.6.1.4.1.171.10.139.2.1.3.1.2
userSessionTableEntry	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1		no-access	A Session Table contain the user login information.
userSessionEntry	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1		no-access	A Session Table contain the user login information.
sessionID	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.1	unsigned32	read-only	The index of session table.
liveTime	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.2	timeticks	read-only	The time peroid user has kept login.
loginType	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.3	integer	read-only	login client of http, telnet, ssh or console. Enumeration: 'console': 4, 'http': 1, 'ssh': 3, 'telnet': 2.
loginIP	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.4	inetaddress	read-only	login ip through http, ssh, or telnet.
loginUserLevel	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.5	integer	read-only	The level of session which user login.
loginUserName	1.3.6.1.4.1.171.10.139.2.1.3.1.2.1.1.6	displaystring	read-only	The name of login user.
mgtPasswordEncryptionGroup	1.3.6.1.4.1.171.10.139.2.1.3.2
passwordEncryptionStatus	1.3.6.1.4.1.171.10.139.2.1.3.2.1	integer	read-write	This object is used to set Password Encryption State Enable\Disable. Enumeration: 'enable': 1, 'disable': 2.
mgtSnmpGroup	1.3.6.1.4.1.171.10.139.2.1.3.3
snmpGlobalSettings	1.3.6.1.4.1.171.10.139.2.1.3.3.1
snmpGlobalState	1.3.6.1.4.1.171.10.139.2.1.3.3.1.1	integer	read-write	This object is for enabling or disabling SNMP Community function. Enumeration: 'disabled': 2, 'enabled': 1.
snmpResBroadReq	1.3.6.1.4.1.171.10.139.2.1.3.3.1.2	integer	read-write	This object is for enabling or disabling SNMP Response Broadcast Request. Enumeration: 'disabled': 2, 'enabled': 1.
snmpUDPPort	1.3.6.1.4.1.171.10.139.2.1.3.3.1.3	unsigned32	read-write	SNMP UDP Port (0-65535).
snmpTrapSourceInterface	1.3.6.1.4.1.171.10.139.2.1.3.3.1.4	snmpadminstring	read-write	Trap Source Interface.
snmpTrapGlobalState	1.3.6.1.4.1.171.10.139.2.1.3.3.1.5	integer	read-write	This object is for enabling or disabling SNMP Trap Global State. Enumeration: 'disabled': 2, 'enabled': 1.
snmpTrapSNMPAuthTrap	1.3.6.1.4.1.171.10.139.2.1.3.3.1.6	integer	read-write	This object is for enabling or disabling SNMP login fail event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
snmpTrapPortLinkUp	1.3.6.1.4.1.171.10.139.2.1.3.3.1.7	integer	read-write	This object is for enabling or disabling Port Link Up. Enumeration: 'disabled': 2, 'enabled': 1.
snmpTrapPortLinkDown	1.3.6.1.4.1.171.10.139.2.1.3.3.1.8	integer	read-write	This object is for enabling or disabling Port Link Down. Enumeration: 'disabled': 2, 'enabled': 1.
snmpTrapColdstart	1.3.6.1.4.1.171.10.139.2.1.3.3.1.9	integer	read-write	This object is for enabling or disabling devie Bootup event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
snmpTrapWarmstart	1.3.6.1.4.1.171.10.139.2.1.3.3.1.10	integer	read-write	This object is for enabling or disabling devie bootup event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
snmpView	1.3.6.1.4.1.171.10.139.2.1.3.3.3
snmpViewTable	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1		no-access	The table of snmp view tree.
snmpViewEntry	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1		no-access	The list of snmp view tree entry.
snmpViewName	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.1	snmpadminstring	read-only	The human readable name for a family of view subtrees.
snmpViewSubtree	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.2	object identifier	read-only	The MIB subtree which when combined with the corresponding instance of vacmViewFamilyMask defines a family of view subtrees.
snmpViewType	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.3	integer	read-write	Indicates whether the corresponding instances of vacmViewFamilySubtree and vacmViewFamilyMask define a family of view subtrees which is included in or excluded from the MIB view. Enumeration: 'included': 1, 'excluded': 2.
snmpViewStatus	1.3.6.1.4.1.171.10.139.2.1.3.3.3.1.1.4	rowstatus	read-write	The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified.
snmpCommunity	1.3.6.1.4.1.171.10.139.2.1.3.3.4
snmpCommunityTable	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1		no-access	The table of snmp community.
snmpCommunityEntry	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1		no-access	The list of snmp community entry.
snmpCommName	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.1	snmpadminstring	read-only	The unique index value of a row in this table.
snmpCommKeyType	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.2	integer	read-write	Key Type. Enumeration: 'plainText': 1, 'encrypted': 2.
snmpCommViewName	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.3	snmpadminstring	read-write	SNMP Community Settings View Name.
snmpCommAccessRight	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.4	integer	read-write	SNMP Community Settings Key Type. Enumeration: 'readWrite': 2, 'readOnly': 1.
snmpCommIPAccListName	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.5	snmpadminstring	read-write	SNMP Community Settings IP Access-List Name.
snmpCommStatus	1.3.6.1.4.1.171.10.139.2.1.3.3.4.1.1.6	rowstatus	read-write	The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCommunityName and snmpCommunitySecurityName objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpCommunityStatus is active(1).
snmpGroup	1.3.6.1.4.1.171.10.139.2.1.3.3.5
snmpGroupTable	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1		no-access	The table of snmp group.
snmpGroupEntry	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1		no-access	The list of snmp group entry.
snmpGroupName	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.1	snmpadminstring	read-only	The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.
snmpGroupSecurityModel	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.2	integer	read-only	In order to gain the access rights allowed by this conceptual row, this securityModel must be in use. Enumeration: 'v2c': 2, 'v1': 1, 'v3': 3.
snmpGroupSecurityLevel	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.3	integer	read-only	The minimum level of security required in order to gain the access rights allowed by this conceptual row. A securityLevel of noAuthNoPriv is less than authNoPriv which in turn is less than authPriv. If multiple entries are equally indexed except for this vacmAccessSecurityLevel index, then the entry which has the highest value for vacmAccessSecurityLevel is selected. Enumeration: 'noAuthNoPriv': 1, 'authPriv': 3, 'authNoPriv': 2.
snmpGroupReadViewName	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.4	snmpadminstring	read-write	The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
snmpGroupWriteViewName	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.5	snmpadminstring	read-write	The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
snmpGroupNotifyViewName	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.6	snmpadminstring	read-write	The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
snmpGroupIpListName	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.7	snmpadminstring	read-write	SNMP Group Settings IP Address-List Name.
snmpGroupStatus	1.3.6.1.4.1.171.10.139.2.1.3.3.5.1.1.8	rowstatus	read-write	The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified.
snmpEngineID	1.3.6.1.4.1.171.10.139.2.1.3.3.6	snmpengineid	read-write	SNMP Engine ID Local Settings.
snmpUser	1.3.6.1.4.1.171.10.139.2.1.3.3.7
snmpUserTable	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1		no-access	The table of snmp user.
snmpUserEntry	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1		no-access	The list of snmp user entry.
snmpUserName	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.1	snmpadminstring	read-only	A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID.
snmpUserVersion	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.2	integer	read-only	A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. Enumeration: 'v2c': 2, 'v1': 1, 'v3': 3.
snmpUserGroupName	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.3	snmpadminstring	read-write	The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.
snmpUserV3Encrypt	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.4	integer	read-only	A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. Enumeration: 'none': 0, 'password': 1, 'key': 2.
snmpUserAuthProtocol	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.5	integer	read-write	An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type of authentication protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same conceptual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a 'wrongValue' error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of UserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoAuthProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoAuthProtocol, then an 'inconsistentValue' error must be returned. If a set operation tries to set the value to the NoAuthProtocol while the UserPrivProtocol value in the same row is not equal to NoPrivProtocol, then an 'inconsistentValue' error must be returned. That means that an SNMP command generator application must first ensure that the UserPrivProtocol is set to the NoPrivProtocol value before it can set the UserAuthProtocol value to NoAuthProtocol. Enumeration: 'sha': 3, 'none': 1, 'md5': 2.
snmpUserAuthProtocolPassword	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.6	snmpadminstring	read-write	Password of snmp user auth protocol.
snmpUserPrivProtocol	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.7	integer	read-write	An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if so, the type of privacy protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same conceptual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a 'wrongValue' error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of usmUserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoPrivProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoPrivProtocol, then an 'inconsistentValue' error must be returned. Note that if any privacy protocol is used, then you must also use an authentication protocol. In other words, if usmUserPrivProtocol is set to anything else than NoPrivProtocol, then the corresponding instance of usmUserAuthProtocol cannot have a value of usmNoAuthProtocol. If it does, then an 'inconsistentValue' error must be returned. Enumeration: 'none': 1, 'des': 2.
snmpUserPrivProtocolPassword	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.8	snmpadminstring	read-write	Password of snmp user priv protocol.
snmpUserAuthProtoByKey	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.9	integer	read-write	Auth-Protocol by Key. Enumeration: 'sha': 3, 'none': 1, 'md5': 2.
snmpUserAuthProtoKey	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.10	snmpadminstring	read-write	Key of snmp user auth protocol by Key.
snmpUserPrivProtoByKey	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.11	integer	read-write	Priv-Protocol by Key. Enumeration: 'none': 1, 'des': 2.
snmpUserPrivProtoKey	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.12	snmpadminstring	read-write	Key of snmp user Priv protocol by Key.
snmpUserIpListName	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.13	snmpadminstring	read-write	SNMP User Settings IP Address-List Name.
snmpUserStatus	1.3.6.1.4.1.171.10.139.2.1.3.3.7.1.1.14	rowstatus	read-write	The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'. In particular, a newly created row for a user who employs authentication, cannot be made active until the corresponding usmUserCloneFrom and usmUserAuthKeyChange have been set. Further, a newly created row for a user who also employs privacy, cannot be made active until the usmUserPrivKeyChange has been set. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified, except for usmUserOwnAuthKeyChange and usmUserOwnPrivKeyChange. For these 2 objects, the value of usmUserStatus MUST be active.
snmpHost	1.3.6.1.4.1.171.10.139.2.1.3.3.8
snmpHostTable	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1		no-access	The table of snmp host.
snmpHostEntry	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1		no-access	The list of snmp host entry.
snmpHostAddress	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.1	inetaddress	read-only	This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object. And this object is unique identifier associated with this snmpNotifyEntry.
snmpHostIPType	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.2	integer	read-only	Type of IP interface. Enumeration: 'iPv4': 1, 'iPv6': 2.
snmpHostVersion	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.3	integer	read-write	The Level of Security to be used when generating SNMP messages using this entry. Enumeration: 'v2c': 2, 'v1': 1, 'authPriv': 5, 'authNoPriv': 4, 'noAuthNoPriv': 3.
snmpHostUDPPort	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.4	integer32	read-write	SNMP UDP Port (0-65535).
snmpHostCommunityName	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.5	snmpadminstring	read-write	The locally arbitrary.
snmpHostStatus	1.3.6.1.4.1.171.10.139.2.1.3.3.8.1.1.6	rowstatus	read-write	The status of this conceptual row in the snmpHostTable.
mgtRMONGroup	1.3.6.1.4.1.171.10.139.2.1.3.4
rmonRisingAlarmTrapState	1.3.6.1.4.1.171.10.139.2.1.3.4.1	integer	read-write	This object is for enabling or disabling RMON Rising Alarm Trap. Enumeration: 'disabled': 2, 'enabled': 1.
rmonFallingAlarmTrapState	1.3.6.1.4.1.171.10.139.2.1.3.4.2	integer	read-write	This object is for enabling or disabling RMON function Falling Alarm Trap. Enumeration: 'disabled': 2, 'enabled': 1.
rmonStatistics	1.3.6.1.4.1.171.10.139.2.1.3.4.3
rmonStatsTable	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1		no-access	A list of Ethernet statistics entries.
rmonStatsEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1		no-access	A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
rmonStatsIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.1	integer32	read-only	The value of this object uniquely identifies this entry.
rmonStatsDataSource	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.2	object identifier	read-write	This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
rmonStatsOwner	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.3	ownerstring	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
rmonStatsOctets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.4	counter32	read-only	The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
rmonStatsPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.5	counter32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
rmonStatsBroadcastPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.6	counter32	read-only	The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
rmonStatsMulticastPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.7	counter32	read-only	The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
rmonStatsUndersizePkts	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.8	counter32	read-only	The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
rmonStatsOversizePkts	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.9	counter32	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
rmonStatsFragments	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.10	counter32	read-only	The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
rmonStatsJabbers	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.11	counter32	read-only	The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
rmonStatsCRCErrors	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.12	counter32	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
rmonStatsCollisions	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.13	counter32	read-only	The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
rmonStatsDropEvents	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.14	counter32	read-only	The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
rmonStatsPkts64Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.15	counter32	read-only	The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
rmonStatsPkts65to127Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.16	counter32	read-only	The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
rmonStatsPkts128to255Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.17	counter32	read-only	The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
rmonStatsPkts256to511Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.18	counter32	read-only	The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
rmonStatsPkts512to1023Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.19	counter32	read-only	The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
rmonStatsPkts1024to1518Octets	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.20	counter32	read-only	The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
rmonStatsStatus	1.3.6.1.4.1.171.10.139.2.1.3.4.3.1.1.21	rmonstatus	read-write	The status of this etherStats entry.
rmonHistory	1.3.6.1.4.1.171.10.139.2.1.3.4.4
rmonHistoryControlTable	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1		no-access	A list of history control entries.
rmonHistoryControlEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1		no-access	A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
rmonHistoryControlIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.1	integer32	read-only	An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
rmonHistoryControlDataSource	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.2	object identifier	read-write	This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
rmonHistoryControlBucketsRequested	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.3	integer32	read-write	The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
rmonHistoryControlBucketsGranted	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.4	integer32	read-only	The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
rmonHistoryControlInterval	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.5	integer32	read-write	The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
rmonHistoryControlOwner	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.6	ownerstring	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
rmonHistoryControlStatus	1.3.6.1.4.1.171.10.139.2.1.3.4.4.1.1.7	rmonstatus	read-write	The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
rmonHistoryTable	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2		no-access	A list of Ethernet history entries.
rmonHistoryEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1		no-access	An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
rmonHistoryIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.1	integer32	read-only	The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
rmonHistorySampleIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.2	integer32	read-only	An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
rmonHistoryOctets	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.3	counter32	read-only	The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
rmonHistoryPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.4	counter32	read-only	The number of packets (including bad packets) received during this sampling interval.
rmonHistoryBroadcastPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.5	counter32	read-only	The number of good packets received during this sampling interval that were directed to the broadcast address.
rmonHistoryMulticastPkts	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.6	counter32	read-only	The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
rmonHistoryUtilization	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.7	integer32	read-only	The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
rmonHistoryUndersizePkts	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.8	counter32	read-only	The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
rmonHistoryOversizePkts	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.9	counter32	read-only	The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
rmonHistoryFragments	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.10	counter32	read-only	The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for rmonHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
rmonHistoryJabbers	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.11	counter32	read-only	The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
rmonHistoryCRCErrors	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.12	counter32	read-only	The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
rmonHistoryCollisions	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.13	counter32	read-only	The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
rmonHistoryDropEvents	1.3.6.1.4.1.171.10.139.2.1.3.4.4.2.1.14	counter32	read-only	The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
rmonAlarm	1.3.6.1.4.1.171.10.139.2.1.3.4.5
rmonAlarmTable	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1		no-access	A list of alarm entries.
rmonAlarmEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1		no-access	A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
rmonAlarmIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.1	integer32	read-only	An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
rmonAlarmInterval	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.2	integer32	read-write	The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmVariable	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.3	object identifier	read-write	The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmSampleType	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.4	integer	read-write	The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1). Enumeration: 'absoluteValue': 1, 'deltaValue': 2.
rmonAlarmValue	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.5	integer32	read-only	The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
rmonAlarmStartupAlarm	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.6	integer	read-only	The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1). Enumeration: 'fallingAlarm': 2, 'risingAlarm': 1, 'risingOrFallingAlarm': 3.
rmonAlarmRisingThreshold	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.7	integer32	read-write	A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmFallingThreshold	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.8	integer32	read-write	A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmRisingEventNumber	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.9	integer32	read-write	The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmFallingEventNumber	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.10	integer32	read-write	The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
rmonAlarmOwner	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.11	ownerstring	read-write	The entity that configured this entry and is therefore using the resources assigned to it.
rmonAlarmStatus	1.3.6.1.4.1.171.10.139.2.1.3.4.5.1.1.12	rmonstatus	read-write	The status of this alarm entry.
rmonEvent	1.3.6.1.4.1.171.10.139.2.1.3.4.6
rmonEventTable	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1		no-access	A list of events to be generated.
rmonEventEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1		no-access	A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
rmonEventIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.1	integer32	read-only	An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
rmonEventDescription	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.2	displaystring	read-write	A comment describing this event entry.
rmonEventType	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.3	integer	read-write	The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations. Enumeration: 'snmptrap': 3, 'none': 1, 'log': 2, 'logandtrap': 4.
rmonEventCommunity	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.4	ownerstring	read-write	If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
rmonEventOwner	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.5	ownerstring	read-write	The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
rmonEventStatus	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.6	rmonstatus	read-write	The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
rmonEventLastTimeSent	1.3.6.1.4.1.171.10.139.2.1.3.4.6.1.1.7	timeticks	read-only	The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
rmonLogTable	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2		no-access	A list of events that have been logged.
rmonLogEntry	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1		no-access	A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47
rmonLogEventIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.1	integer32	read-only	The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
rmonLogIndex	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.2	integer32	read-only	An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
rmonLogTime	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.3	timeticks	read-only	The value of sysUpTime when this log entry was created.
rmonLogDescription	1.3.6.1.4.1.171.10.139.2.1.3.4.6.2.1.4	displaystring	read-only	An implementation dependent description of the event that activated this log entry.
mgtTelnetWebGroup	1.3.6.1.4.1.171.10.139.2.1.3.5
telnetState	1.3.6.1.4.1.171.10.139.2.1.3.5.1	integer	read-write	Enable/Disable management Telnetsetting mechanism. Enumeration: 'disabled': 2, 'enabled': 1.
telnetPort	1.3.6.1.4.1.171.10.139.2.1.3.5.2	integer32	read-write	The value is for setting telnet's UDP Port.
webState	1.3.6.1.4.1.171.10.139.2.1.3.5.3	integer	read-write	This object is for Enabled(1) or Disabled(2) Web state in the system. Enumeration: 'disabled': 2, 'enabled': 1.
webPort	1.3.6.1.4.1.171.10.139.2.1.3.5.4	integer32	read-write	Web Server Port Number.
mgtSessionTimeoutGroup	1.3.6.1.4.1.171.10.139.2.1.3.6
sessionTimeoutWeb	1.3.6.1.4.1.171.10.139.2.1.3.6.1	integer32	read-write	Session Timeout. Web Session Timeout (60-36000)sec.
sessionTimeoutTelnet	1.3.6.1.4.1.171.10.139.2.1.3.6.2	integer32	read-write	Session Timeout. Telnet Session Timeout (0-1439)min.
mgtDDPGroup	1.3.6.1.4.1.171.10.139.2.1.3.14
ddpStatus	1.3.6.1.4.1.171.10.139.2.1.3.14.1	integer	read-write	Enable/Disable DDP function. Enumeration: 'disabled': 2, 'enabled': 1.
ddpReportTime	1.3.6.1.4.1.171.10.139.2.1.3.14.2	integer	read-write	Set DDP report time seconds. Enumeration: 'offset90sec': 90, 'never': 0, 'offset30sec': 30, 'offset60sec': 60, 'offset120sec': 120.
ddpTable	1.3.6.1.4.1.171.10.139.2.1.3.14.3		no-access	Define sysDDPTable for per port settings.
ddpEntry	1.3.6.1.4.1.171.10.139.2.1.3.14.3.1		no-access	Define sysDDPTable for per port settings.
ddpPort	1.3.6.1.4.1.171.10.139.2.1.3.14.3.1.1	integer	read-only	This object indicates the port index.
ddpPortStatus	1.3.6.1.4.1.171.10.139.2.1.3.14.3.1.2	integer	read-write	This object indicates DDP status is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
dlinkL2Features	1.3.6.1.4.1.171.10.139.2.1.4
l2FDBGroup	1.3.6.1.4.1.171.10.139.2.1.4.1
fdbStaticFDB	1.3.6.1.4.1.171.10.139.2.1.4.1.1
fdbUnicastStaticFDB	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1
fdbUnicastStaticFDBTable	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1		no-access	Unicast Static FDB .
fdbUnicastStaticFDBEntry	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1		no-access	Unicast Static FDB .
fdbUnicastStaticFDBVID	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.1	integer32	read-only	Unicast Static FDB. VID (1-4094).
fdbUnicastStaticFDBMACAddr	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.2	macaddress	read-only	Unicast Static FDB. MAC Address.
fdbUnicastStaticFDBPort	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.3	interfaceindex	read-write	Unicast Static FDB. port.
fdbUnicastStaticFDBState	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.4	integer	read-write	This object indicates the status of this entry. permanent(1) - this entry is currently in use and will remain so after the next reset of the bridge. permanentDrop(2) - This entry will filter the packet with the specified MAC address as the source MAC or as the destination MAC. The entry is currently in use and will remain so after the next reboot of the device. Enumeration: 'permanent': 1, 'permanentDrop': 2.
fdbUnicastStaticFDBRowStatus	1.3.6.1.4.1.171.10.139.2.1.4.1.1.1.1.1.5	rowstatus	read-only	This object indicates the status of fdbUnicastStaticFDBTable to which a frame with a specific unicast address will be flooded in the event that it has not been learned. To set fdbUnicastStaticFDBPort, we have to set the rowstatus as 'NOT_IN_SERVICE' and set the appropriate port in the fdbUnicastStaticFDBPort and set the rowstatus as 'ACTIVE' to make the port available.
fdbMulticastStaticFDB	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2
fdMulticastStaticFDBTable	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1		no-access	Multicast Static FDB .
fdbMulticastStaticFDBEntry	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1		no-access	Multicast Static FDB .
fdbMulticastStaticFDBVID	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.1	integer32	read-only	Multicast Static FDB. VID (1-4094).
fdbMulticastStaticFDBMACAddr	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.2	macaddress	read-only	Multicast Static FDB. MAC Address.
fdbMulticastStaticFDBEgressPorts	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.3	portlist	read-write	Multicast Static FDB. egress PortList.
fdbMulticastStaticFDBRowStatus	1.3.6.1.4.1.171.10.139.2.1.4.1.1.2.1.1.4	rowstatus	read-only	This object indicates the status of fdMulticastStaticFDBTable to which a frame with a specific multicast address will be flooded in the event that it has not been learned. To set fdbMulticastStaticFDBEgressPorts, we have to set the rowstatus as 'NOT_IN_SERVICE' and set the appropriate portlist in the fdbMulticastStaticFDBEgressPorts and set the rowstatus as 'ACTIVE' to make the port available.
fdbMACAddressTableSettings	1.3.6.1.4.1.171.10.139.2.1.4.1.2
fdbMACAddrGlobalSettings	1.3.6.1.4.1.171.10.139.2.1.4.1.2.1
fdbMACAddrAgingTime	1.3.6.1.4.1.171.10.139.2.1.4.1.2.1.1	integer32	read-write	MAC Address Table Settings. Global Settings. Aging Time (0, 10-1000000)
fdbMACAddrAgingDestinationHit	1.3.6.1.4.1.171.10.139.2.1.4.1.2.1.2	integer	read-write	MAC Address Table Settings. Global Settings. Aging Destination Hit Enumeration: 'disabled': 2, 'enabled': 1.
fdbMACAddressLearningTable	1.3.6.1.4.1.171.10.139.2.1.4.1.2.2		no-access	Multicast Static FDB .
fdbMACAddressLearningEntry	1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1		no-access	Multicast Static FDB .
fdbMACAddressLearningPort	1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1.1	interfaceindex	read-only	MAC Address Learning. port.
fdbMACAddressLearningState	1.3.6.1.4.1.171.10.139.2.1.4.1.2.2.1.2	integer	read-write	MAC Address Learning. State. Enumeration: 'disabled': 2, 'enabled': 1.
fdbMACAddressTable	1.3.6.1.4.1.171.10.139.2.1.4.1.3		no-access	Multicast Static FDB .
fdbMACAddressTableEntry	1.3.6.1.4.1.171.10.139.2.1.4.1.3.1		no-access	Multicast Static FDB .
fdbMACAddrTabVID	1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.1	integer32	read-only	MAC Address Table. VID (1-4094).
fdbMACAddrTabMACAddr	1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.2	macaddress	read-only	MAC Address Table. MAC Address.
fdbMACAddrTabType	1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.3	integer	read-only	MAC Address Table. Type. Enumeration: 'static': 5, 'self': 4, 'dynamic': 3.
fdbMACAddrTabPort	1.3.6.1.4.1.171.10.139.2.1.4.1.3.1.4	displaystring	read-only	The port number of the port on which a frame having a source address equal to the value of the corresponding instance of dynamicFdbMacAddr has been seen.If the port is LA port, will show 'po' before port.
fdbMACAddressClear	1.3.6.1.4.1.171.10.139.2.1.4.1.4
fdbClearId	1.3.6.1.4.1.171.10.139.2.1.4.1.4.1	unsigned32	read-write	Fdb clear object identification: If fdbClearAction is clear by port, then this value is a port number; If fdbClearAction is clear by vlan, then this value is a port vlan id; If fdbClearAction is clear by MAC, then this value is a MAC address; otherwise this value is not used.
fdbClearMac	1.3.6.1.4.1.171.10.139.2.1.4.1.4.2	macaddress	read-write	Fdb clear object identification: If fdbClearAction is clear by MAC, then this value is a MAC address; otherwise this value is not used.
fdbClearAction	1.3.6.1.4.1.171.10.139.2.1.4.1.4.3	integer	read-write	Fdb clear action identification: ClearAll to clear all fdb entries; ClearClearAllByVlanId clear all fdb entries that belong to specified vlan id; ClearAllByPort clear all fdb entries that belong to specified port; ClearAllByMAC clear all fdb entries that belong to specified MAC address Enumeration: 'clearByVlanId': 2, 'clearAll': 1, 'clearByPort': 3, 'clearByMAC': 4.
l2Dot1qVlanGroup	1.3.6.1.4.1.171.10.139.2.1.4.2
dot1qVlanAsyOnOff	1.3.6.1.4.1.171.10.139.2.1.4.2.1	integer	read-write	Enable/Disable IEEE 802.1Q Asymmetric VLAN Enumeration: 'disabled': 2, 'enabled': 1.
dot1qVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.2.2		no-access	A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
dot1qVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1		no-access	Information for a VLAN configured into the device by (local or network) management.
dot1qVlanid	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.1	integer32	read-only	Vlan id used to identify the VLAN.
dot1qVlanName	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.2	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the VLAN.
dot1qVlanEgressPorts	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.3	portlist	read-only	The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
dot1qVlanUntaggedPorts	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.4	portlist	read-only	The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
dot1qVlanRowStatus	1.3.6.1.4.1.171.10.139.2.1.4.2.2.1.99	rowstatus	read-write	The status of a row in sysDot1qVlanTable. By setting this object, new entries can be created in sysDot1qVlanTable and existing entries can be removed from sysDot1qVlanTable. It can be used as specified in the SNMP v2 standard.
dot1qVlanPortTable	1.3.6.1.4.1.171.10.139.2.1.4.2.3		no-access	A table containing per port control and status information for VLAN configuration in the device.
dot1qVlanPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1		no-access	Information controlling VLAN configuration for a port on the device.
dot1qVlanPortIndex	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.1	integer32	read-only	Port index.
dot1qVlanPortVlanMode	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.2	integer	read-write	This is used to specify the VLAN mode for the port. Use the no command to reset the VLAN mode to the default setting. Enumeration: 'access': 1, 'hybrid': 3, 'trunk': 2.
dot1qVlanPortAcceptableFrameType	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.3	integer	read-write	This is used to set the acceptable types of frames by a port. Use the no form of the command to reset to the default setting. Enumeration: 'admitTagged': 2, 'admitAll': 1, 'admitUntagged': 3.
dot1qVlanPortIngressChecking	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.4	integer	read-write	This is used to enable ingress checking for frames received by a port. Use the no command to disable the ingress check. Enumeration: 'false': 2, 'true': 1.
dot1qVlanPortNativeVlanStatus	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.5	integer	read-write	This object indicates whether enable tagging or untagging mode of the native VLAN on the interface. This value is meaningful only to TRUNK port.Access port and hybrid port MUST keep disabled. Enumeration: 'disable': 0, 'tag': 1, 'untag': 2.
dot1qVlanPortNativeVlanId	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.6	integer	read-write	The VLAN-ID assigned to untagged frames received on this port. The port in native VLAN will also been set as untagged as default setting.
dot1qVlanPortTagVlanList	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.7	vlanlist	read-write	The tagged VLAN list which the port belongs to.
dot1qVlanPortUntagVlanList	1.3.6.1.4.1.171.10.139.2.1.4.2.3.1.8	vlanlist	read-write	The untagged VLAN list which the port belongs to.
l2STPGroup	1.3.6.1.4.1.171.10.139.2.1.4.3
stpProtocolSetting	1.3.6.1.4.1.171.10.139.2.1.4.3.1
stpStatus	1.3.6.1.4.1.171.10.139.2.1.4.3.1.1	integer	read-write	The administrative module status requested by management for the STP Module. This enables or disables STP in the system. A value of 'enabled' (1) indicates that STP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that STP must be disabled in the device on all the ports. Enumeration: 'disabled': 2, 'enabled': 1.
stpNewRootTrapState	1.3.6.1.4.1.171.10.139.2.1.4.3.1.2	integer	read-write	This object is for enabling or disabling STP new root Trap. Enumeration: 'disabled': 2, 'enabled': 1.
stpTopologyChangeTrapState	1.3.6.1.4.1.171.10.139.2.1.4.3.1.3	integer	read-write	This object is for enabling or disabling STP topology change Trap. Enumeration: 'disabled': 2, 'enabled': 1.
stpVersion	1.3.6.1.4.1.171.10.139.2.1.4.3.1.4	integer	read-write	The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp(3)' indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s. Enumeration: 'mstp': 3, 'stpCompatible': 0, 'rstp': 2.
stpBridgePriority	1.3.6.1.4.1.171.10.139.2.1.4.3.1.5	integer32	read-write	The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
stpBridgeMaxAge	1.3.6.1.4.1.171.10.139.2.1.4.3.1.6	timeout	read-write	The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
stpBridgeHelloTime	1.3.6.1.4.1.171.10.139.2.1.4.3.1.7	timeout	read-write	The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
stpBridgeForwardDelay	1.3.6.1.4.1.171.10.139.2.1.4.3.1.8	timeout	read-write	The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
stpMaxHopCount	1.3.6.1.4.1.171.10.139.2.1.4.3.1.9	integer32	read-write	Indicates the Maximum Hop Count value. One-hundredth of the configured value will be set as Max Hop Count. An agent may return a badValue error if a set is attempted to a value which is not a multiples of hundred.
stpTxHoldCount	1.3.6.1.4.1.171.10.139.2.1.4.3.1.10	integer32	read-write	The value used by the Port Transmit state machine to limit the maximum transmission rate.
stpPortConfigurationTable	1.3.6.1.4.1.171.10.139.2.1.4.3.2		no-access	This table contains Common Spanning Tree Port Information.
stpPortConfigurationEntry	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1		no-access	A list of information maintained by every port for Common Spanning tree.
stpPort	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.1	integer32	read-only	The Port number of the port for which this entry contains spanning tree information.
stpPortAdminPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.2	integer32	read-write	The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read.
stpPortPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.3	integer32	read-only	The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
stpPortState	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.4	integer	read-write	Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts. Enumeration: 'disabled': 2, 'enabled': 1.
stpPortGuardRoot	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.5	truthvalue	read-write	A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. This parameter should be FALSE by default. If set it can cause lack of spanning tree connectivity. It is set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This administrator configuration is also known as 'Root Guard'.
stpPortLinkType	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.6	integer	read-write	The administrative point-to-point status of the LAN segment attached to this port. A value of p2p(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'shared': 1, 'p2p': 0, 'auto': 2.
stpPortOperLinkType	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.7	integer	read-only	The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the stpPortLinkType object. Enumeration: 'shared': 2, 'p2p': 1.
stpPortFast	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.8	integer	read-write	The administrative value of the Edge Port parameter. A value of edge(0) indicates that this port should be assumed as an edge-port and a value of disabled(1) indicates that this port should be assumed as a non-edge-port.auto indicates that detection of a port as Edge Port happens automatically Enumeration: 'disabled': 1, 'edge': 0, 'network': 2.
stpPortOperFast	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.9	integer	read-only	The operational value of the Edge Port parameter. The object is initialized to the value of stpPortFast and is set FALSE on reception of a BPDU. Enumeration: 'non-edge': 2, 'edge': 1.
stpPortTCNFilter	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.10	truthvalue	read-write	A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause temporary loss of connectivity after changes in a spanning trees active topology as a result of persistent incorrectly learnt station location information. It is set by a network administrator to prevent bridges external to a core region of the network causing address flushing in that region, possibly because those bridges are not under the full control of the administrator or MAC_Operational for the attached LANs transitions frequently.
stpPortFowardBPDU	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.11	integer	read-write	This object is for enabling or disabling forward BPDU. Enumeration: 'disabled': 2, 'enabled': 1.
stpPortPriority	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.12	integer32	read-write	The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
stpPortHelloTime	1.3.6.1.4.1.171.10.139.2.1.4.3.2.1.13	timeout	read-write	The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
mstConfiguration	1.3.6.1.4.1.171.10.139.2.1.4.3.3
mstiConfigurationName	1.3.6.1.4.1.171.10.139.2.1.4.3.3.1	displaystring	read-write	The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
mstiRevisionLevel	1.3.6.1.4.1.171.10.139.2.1.4.3.3.2	integer32	read-write	Version of the MST Region.
mstMstiConfigDigest	1.3.6.1.4.1.171.10.139.2.1.4.3.3.3	octet string	read-only	The Configuration Digest value for this Region.
mstVlanMstiMappingTable	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4		no-access	This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
mstVlanMstiMappingEntry	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1		no-access	A conceptual row containing the status of the MSTP instance.
mstInstanceIndex	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.1	integer32	read-only	An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
mstSetVlanList	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.2	octet string	read-write	A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
mstResetVlanList	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.3	octet string	read-write	A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values.
mstInstanceVlanMapped	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.4	octet string	read-only	A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'.
mstInstanceVlanMapped2k	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.5	octet string	read-only	A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
mstInstanceVlanMapped3k	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.6	octet string	read-only	A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
mstInstanceVlanMapped4k	1.3.6.1.4.1.171.10.139.2.1.4.3.3.4.1.7	octet string	read-only	A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
stpInstance	1.3.6.1.4.1.171.10.139.2.1.4.3.4
mstCistBridgePriority	1.3.6.1.4.1.171.10.139.2.1.4.3.4.1	integer32	read-write	The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
mstCistStatus	1.3.6.1.4.1.171.10.139.2.1.4.3.4.2	integer	read-only	The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start. Enumeration: 'disabled': 2, 'enabled': 1.
mstCistPortDesignatedRoot	1.3.6.1.4.1.171.10.139.2.1.4.3.4.3	bridgeid	read-only	The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.
mstCistRegionalRoot	1.3.6.1.4.1.171.10.139.2.1.4.3.4.4	bridgeid	read-only	The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
mstCistPortDesignatedBridge	1.3.6.1.4.1.171.10.139.2.1.4.3.4.5	bridgeid	read-only	The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
mstMstiBridgeTable	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6		no-access	Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
mstMstiBridgeEntry	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1		no-access	Entry indicating the Bridge Information.
mstMstiInstanceIndex	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.1	integer32	read-only	Spanning Tree Instance to which the information belongs.
mstMstiBridgePriority	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.2	integer32	read-write	The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
mstMstiStatus	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.3	integer	read-only	The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start. Enumeration: 'disabled': 2, 'enabled': 1.
mstMstiPortDesignatedRoot	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.4	bridgeid	read-only	The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted.
mstMstiBridgeRegionalRoot	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.5	bridgeid	read-only	MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node
mstMstiPortDesignatedBridge	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.6	bridgeid	read-only	The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
mstMstiTopChanges	1.3.6.1.4.1.171.10.139.2.1.4.3.4.6.1.7	counter32	read-only	The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.
stpInstancePortTable	1.3.6.1.4.1.171.10.139.2.1.4.3.5
mstCistPortTable	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1		no-access	This table contains Common Spanning Tree Port Information.
mstCistPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1		no-access	A list of information maintained by every port for Common Spanning tree.
mstCistPort	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.1	integer32	read-only	The Port number of the port for which this entry contains spanning tree information.
mstCistPortAdminPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.2	integer32	read-write	The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
mstCistPortPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.3	integer32	read-only	The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
mstCistPortPriority	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.4	integer32	read-write	The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
mstCistPortState	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.5	integer	read-only	Current state of the Port as defined by the Common spanning tree protocol. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
mstCistCurrentPortRole	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.6	integer	read-only	Current Port Role of the port for this spanning tree instance. Enumeration: 'backup': 2, 'alternate': 1, 'designated': 4, 'disabled': 0, 'master': 5, 'root': 3.
mstCistPortProtocolMigration	1.3.6.1.4.1.171.10.139.2.1.4.3.5.1.1.7	truthvalue	read-write	Indicates the Protocol migration state of this Port. writing TRUE(1) to this object forces this port to transmit protocol BPDU Any other operation on this object has no effect.
mstMstiPortTable	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2		no-access	This table contains Spanning Tree Instance Specific Port Information.
mstMstiPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1		no-access	A list of information maintained by every port for each and every spanning tree instance.
mstMstiPort	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.1	integer32	read-only	The Port number of the port for which this entry contains spanning tree information.
mstMstiPortInstanceIndex	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.2	integer32	read-only	An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
mstMstiPortAdminPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.3	integer32	read-write	The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
mstMstiPortPathCost	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.4	integer32	read-only	The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
mstMstiPortPriority	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.5	integer32	read-write	The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
mstMstiPortState	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.6	integer	read-only	Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
mstMstiCurrentPortRole	1.3.6.1.4.1.171.10.139.2.1.4.3.5.2.1.7	integer	read-only	Current Port Role of the port for this spanning tree instance. Enumeration: 'backup': 2, 'alternate': 1, 'designated': 4, 'disabled': 0, 'master': 5, 'root': 3.
stpTraps	1.3.6.1.4.1.171.10.139.2.1.4.3.6
stpTrapsList	1.3.6.1.4.1.171.10.139.2.1.4.3.6.0
stpNewRootTrap	1.3.6.1.4.1.171.10.139.2.1.4.3.6.0.1			Generated whenever a new root bridge is selected in the topology
stpTopologyChgTrap	1.3.6.1.4.1.171.10.139.2.1.4.3.6.0.2			Generated when topology change is detected
l2LBDGroup	1.3.6.1.4.1.171.10.139.2.1.4.4
lbdGlobalSettings	1.3.6.1.4.1.171.10.139.2.1.4.4.1
lbdState	1.3.6.1.4.1.171.10.139.2.1.4.4.1.1	integer	read-write	Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol (STP) is not enabled in the network, especially when the down links are hubs or unmanaged switchs.The Switch will automatically shutdown the port and sends a log to the administrator. Enumeration: 'disabled': 2, 'enabled': 1.
lbdMode	1.3.6.1.4.1.171.10.139.2.1.4.4.1.2	integer	read-write	Loopback detection function mode. Enumeration: 'vlan': 2, 'port': 1.
lbdEnabledVLANIDList	1.3.6.1.4.1.171.10.139.2.1.4.4.1.3	displaystring	read-write	Set Enabled VLAN ID List .
lbdInterval	1.3.6.1.4.1.171.10.139.2.1.4.4.1.4	integer32	read-write	Set a Loop detection Interval between 1 and 32767 seconds. The default is 2 seconds. This time interval to be used at counting time seconds to resend the CTP packet automatically.
lbdTrapState	1.3.6.1.4.1.171.10.139.2.1.4.4.1.5	integer	read-write	Enable/Disable Loopback detection trap function. Enumeration: 'disabled': 2, 'enabled': 1.
lbdAction	1.3.6.1.4.1.171.10.139.2.1.4.4.1.6	integer	read-write	Loopback detection function action. Enumeration: 'none': 2, 'shutdown': 1.
lbdPortSettings	1.3.6.1.4.1.171.10.139.2.1.4.4.2
lbdportTable	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1		no-access	A table to control Loopback detection features either for the entire switch or for each interface in the switch.
lbdportEntry	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1		no-access	An entry appears in this table for each interface in the system.
lbdportIndex	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.1	integer32	read-only	The interface index of the port for which the configuration in this entry applies.
lbdportState	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.2	integer	read-write	Provides control to per port enable or disable the loopback detection function. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
lbdportResult	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.3	integer	read-only	The loop Result for this port. Enumeration: 'disabled': 2, 'normal': 1.
lbdportTimeLeft	1.3.6.1.4.1.171.10.139.2.1.4.4.2.1.1.4	snmpadminstring	read-only	Loopback Detection Port Settings Time Left (sec).
lbdVlanSettings	1.3.6.1.4.1.171.10.139.2.1.4.4.3
lbdVlanLoopTable	1.3.6.1.4.1.171.10.139.2.1.4.4.3.1		no-access	A table to display Loopback detection features by vlan mode.
lbdVlanLoopEntry	1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1		no-access	An entry appears in this table for each interface in the system.
lbdVlanLoopIndex	1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1.1	integer32	read-only	Display port lists loop status by vlan.
lbdVlanLoopPorts	1.3.6.1.4.1.171.10.139.2.1.4.4.3.1.1.2	portlist	read-only	Display port lists loop status by vlan.
lbdTraps	1.3.6.1.4.1.171.10.139.2.1.4.4.4
lbdTrapsList	1.3.6.1.4.1.171.10.139.2.1.4.4.4.0
lbdLoopOccur	1.3.6.1.4.1.171.10.139.2.1.4.4.4.0.1			This is a trap that will send to snmp manager,and it will be generated when loop is occured.
lbdLoopRecover	1.3.6.1.4.1.171.10.139.2.1.4.4.4.0.2			This is a trap that will send to snmp manager,and it will be generated when port is recovering.
l2LAGroup	1.3.6.1.4.1.171.10.139.2.1.4.5
laSystem	1.3.6.1.4.1.171.10.139.2.1.4.5.1
laSystemPriority	1.3.6.1.4.1.171.10.139.2.1.4.5.1.1	integer	read-write	The priority value assigned to System. This 16-bit value is read-only.
laSystemLoadBalanceAlgorithm	1.3.6.1.4.1.171.10.139.2.1.4.5.1.2	integer	read-write	Link selection policy to be used by the port-channel. Selection policy isid implies selection based on Service-instance and is applicable only in Provider BackBone bridge. Enumeration: 'ipSrcDst': 6, 'ipDst': 5, 'ipSrc': 4, 'macDst': 2, 'macSrc': 1, 'macSrcDst': 3.
laActorSystemID	1.3.6.1.4.1.171.10.139.2.1.4.5.1.3	macaddress	read-only	A 6-octet read-only MAC address value used as a unique identifier for the System.
laChannel	1.3.6.1.4.1.171.10.139.2.1.4.5.2
laPortChannelTable	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1		no-access	A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel
laPortChannelEntry	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1		no-access	There is one entry in this table for each created port-channel port
laPortChannelIfIndex	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.1	interfaceindex	read-only	The ifIndex of the port-channel(Aggregator's interface index).
laPortChannelMaxPorts	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.2	integer	read-only	.
laPortChannelMemberNumber	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.3	integer	read-only	.
laPortChannelMemberList	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.4	portlist	read-write	Member Port list of the port channel. Add the ports as a aggregation member associated of a port-channel.
laSystemChannelGroupID	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.5	integer	read-only	The priority value assigned to System. This 16-bit value is read-only.
laPortChannelMode	1.3.6.1.4.1.171.10.139.2.1.4.5.2.1.1.6	integer	read-write	Current Operating Channel Mode of the port active(1) - it will always send frames along the configured links. passive(2) - If the actor and partner are both in passive mode, they do not exchange LACP packets. on(3) - force the port to enable channeling (Manual). disabled(4) - channeling is disabled. Enumeration: 'active': 1, 'passive': 2, 'disabled': 4, 'on': 3.
laChannelDetailTable	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2		no-access	A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel
laChannelDetailEntry	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1		no-access	There is one entry in this table for each created port-channel port
laChannelDetailPort	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.1	interfaceindex	read-only	The ifIndex of the port-channel(Aggregator's interface index).
laChannelDetailLACPTimeout	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.2	integer	read-write	This object indicates LACP_Timeout to this Aggregation Port. short(1) - LACP Timeout 3 seconds. long (2) - LACP Timeout 90 seconds. Enumeration: 'short': 1, 'long': 2.
laChannelDetailWorkingMode	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.3	integer	read-write	Current Operating Channel Mode of the port active(1) - it will always send frames along the configured links. passive(2) - If the actor and partner are both in passive mode, they do not exchange LACP packets. Enumeration: 'active': 1, 'passive': 2.
laChannelDetailLACPState	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.4	integer	read-only	This read-only object is used to display the port state in aggregation. upInBndl(0) - The port is operationally up and actively takes part in aggregation. standby(1) - The port is capable of joining in aggregation group, when any of the ports in aggregation group goes down. down(2) - The port is operationally down in lower layers. or the port is operational in lower layers but temporarily not able to participate in aggregation because of different partner information in the same group. upIndividual(3) - The port is operating individually and is not taking part in aggregation. Enumeration: 'standby': 1, 'down': 2, 'upInBndl': 0, 'upIndividual': 3.
laChannelDetailPortPriority	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.5	integer	read-write	Port Channel Detail Information Port Priority.
laChannelDetailPortNumber	1.3.6.1.4.1.171.10.139.2.1.4.5.2.2.1.6	integer	read-only	Port Channel Detail Information Port number.
laChannelNeighborTable	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3		no-access	A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel
laChannelNeighborEntry	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1		no-access	There is one entry in this table for each created port-channel port
laChannelNeighborPort	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.1	interfaceindex	read-only	The ifIndex of the port-channel(Aggregator's interface index).
laChannelNeighborSystemPriority	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.2	integer	read-only	Port Channel Neighbor Information Partner System Priority.
laChannelNeighborSystemID	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.3	macaddress	read-only	Port Channel Neighbor Information Partner System ID.
laChannelNeighborPortNo	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.4	integer	read-only	Port Channel Detail Information Port number.
laChannelNeighborLACPTimeout	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.5	integer	read-only	Port Channel Neighbor Information Partner LACP Timeout. Enumeration: 'short': 1, 'long': 2.
laChannelNeighborWorkingMode	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.6	integer	read-only	Port Channel Neighbor Information Partner LACP Timeout. Enumeration: 'active': 1, 'passive': 2.
laChannelNeighborPortPriority	1.3.6.1.4.1.171.10.139.2.1.4.5.2.3.1.7	integer	read-only	Port Channel Detail Information Port Priority.
l2MulticastCtrlGroup	1.3.6.1.4.1.171.10.139.2.1.4.6
igsSystem	1.3.6.1.4.1.171.10.139.2.1.4.6.1
igsStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.1.1	integer	read-write	Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module starts protocol operations. When set to 'disabled', the IGS module stops performing protocol operations. Enumeration: 'disabled': 2, 'enabled': 1.
igsClearIgmpSnoopByVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.1.3	vlanidornone	read-write	This object indicates the VLAN ID on which the IGMP snooping counters will be cleared. When read, the special value 0 is returned.
igsVlan	1.3.6.1.4.1.171.10.139.2.1.4.6.2
igsVlanFilterTable	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1		no-access	This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
igsVlanFilterEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1		no-access	Contains snooping status , version and fast leave configuration for a specific VLAN.
igsVlanFilterVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.1	integer32	read-only	Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in IgsVlanFilterEntry is to be done.
igsVlanSnoopStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.2	integer	read-write	This object allows you to enable/disable IGS function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
igsVlanFastLeave	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.4	integer	read-write	Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to 'enabled', the switch does not send a group specific query and immediately removes the port from the forwarding table. Enumeration: 'disabled': 2, 'enabled': 1.
igsVlanQuerier	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.7	integer	read-only	Indicates whether the switch is configured as a querier in the VLAN Enumeration: 'disabled': 2, 'enabled': 1.
igsVlanCfgQuerier	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.8	integer	read-write	The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries. Enumeration: 'disabled': 2, 'enabled': 1.
igsVlanQuerierVersion	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.9	integer	read-write	This object allows you to set igmp version function on a specific VLAN. Enumeration: 'v1': 1, 'v2': 2, 'v3': 3.
igsVlanQueryInterval	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.10	integer32	read-write	This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there is no queriers in the network.
igsVlanMaxResponseTime	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.11	integer32	read-write	The maximum query response time advertised General queries on this interface.
igsVlanRobustnessValue	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.12	integer32	read-write	When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number for a specific VLAN queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds 'RobustnessValue', then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group.
igsVlanLastMemberQueryInterval	1.3.6.1.4.1.171.10.139.2.1.4.6.2.1.1.13	integer32	read-write
igsVlanMulticastGroupTable	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2		no-access	This table contains MAC based multicast forwarding information.
igsVlanMulticastGroupEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1		no-access	This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.
igsVlanMulticastGroupVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.1	integer32	read-only	VLAN ID pertaining to the Multicast forwarding entry
igsVlanMulticastGroupIpAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.2	ipaddress	read-only	Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.
igsVlanMulticastGroupReceiverPortIndex	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.3	interfaceindex	read-only	The interface on which the multicast group address is learnt.
igsVlanMulticastGroupReceiverSrcAddr	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.4	ipaddress	read-only	The IP address of the multicast receiver that has sent the multicast report to join this group.
igsVlanMulticastGroupMacAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.5	macaddress	read-only	Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.
igsVlanMulticastGroupExp	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.7	timeticks	read-only
igsVlanMulticastGroupPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.2.2.1.8	portlist	read-only	List of ports onto which the multicast data packets destined for this group will be forwarded.
igsVlanStaticMcastGrpTable	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3		no-access	This table contains IP based multicast forwarding information.
igsVlanStaticMcastGrpEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1		no-access	This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be forwarded.
igsVlanStaticMcastGrpVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.1	integer32	read-only	VLAN ID pertaining to the Multicast forwarding entry
igsVlanStaticMcastGrpGroupAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.2	inetaddress	read-only	IP/IPv6 multicast group address
igsVlanStaticMcastGrpPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.3	portlist	read-write	List of ports onto which the multicast data packets destined for this source and group will be forwarded.
igsVlanStaticMcastGrpRowStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.2.3.1.4	rowstatus	read-only	The row status variable, used according to row installation and removal conventions.
igsVlanRouterTable	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4		no-access	This table contains the list of ports through which a router, in a particular VLAN is reachable.
igsVlanRouterEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1		no-access	Contains the VLAN ID and list of ports on which routers are present in the VLAN.
igsVlanRouterVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.1	integer32	read-only	VLAN ID of the ports through which router is reachable.
igsVlanRouterStaticPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.2	portlist	read-write	List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
igsVlanRouterBlockPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.3	portlist	read-write	List of ports which are configured statically as blocked router ports statically.
igsVlanRouterDynamicPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.2.4.1.4	portlist	read-only	List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
igsStats	1.3.6.1.4.1.171.10.139.2.1.4.6.3
igsStatsTable	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1		no-access	This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis.
igsStatsEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1		no-access	Contains snooping statistics for a particular VLAN.
igsStatsVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.1	integer32	read-only	VLAN ID for which snooping statistics are displayed
igsStatsIGMPv1RxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.2	counter32	read-only
igsStatsIGMPv1RxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.3	counter32	read-only
igsStatsIGMPv1TxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.4	counter32	read-only
igsStatsIGMPv1TxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.5	counter32	read-only
igsStatsIGMPv2RxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.6	counter32	read-only
igsStatsIGMPv2RxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.7	counter32	read-only
igsStatsIGMPv2RxLeave	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.8	counter32	read-only
igsStatsIGMPv2TxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.9	counter32	read-only
igsStatsIGMPv2TxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.10	counter32	read-only
igsStatsIGMPv2TxLeave	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.11	counter32	read-only
igsStatsIGMPv3RxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.12	counter32	read-only
igsStatsIGMPv3RxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.13	counter32	read-only
igsStatsIGMPv3TxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.14	counter32	read-only
igsStatsIGMPv3TxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.3.1.1.15	counter32	read-only
mldSystem	1.3.6.1.4.1.171.10.139.2.1.4.6.4
mldStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.4.1	integer	read-write	Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module starts protocol operations. When set to 'disabled', the IGS module stops performing protocol operations. Enumeration: 'disabled': 2, 'enabled': 1.
mldClearIgmpSnoopByVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.4.3	vlanidornone	read-write	This object indicates the VLAN ID on which the IGMP snooping counters will be cleared. When read, the special value 0 is returned.
mldVlan	1.3.6.1.4.1.171.10.139.2.1.4.6.5
mldVlanFilterTable	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1		no-access	This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
mldVlanFilterEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1		no-access	Contains snooping status , version and fast leave configuration for a specific VLAN.
mldVlanFilterVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.1	integer32	read-only	Index of MldVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in MldVlanFilterEntry is to be done.
mldVlanSnoopStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.2	integer	read-write	This object allows you to enable/disable IGS function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
mldVlanFastLeave	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.4	integer	read-write	Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to 'enabled', the switch does not send a group specific query and immediately removes the port from the forwarding table. Enumeration: 'disabled': 2, 'enabled': 1.
mldVlanQuerier	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.7	integer	read-only	Indicates whether the switch is configured as a querier in the VLAN Enumeration: 'disabled': 2, 'enabled': 1.
mldVlanCfgQuerier	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.8	integer	read-write	The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries. Enumeration: 'disabled': 2, 'enabled': 1.
mldVlanQuerierVersion	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.9	integer	read-write	This object allows you to set igmp version function on a specific VLAN. Enumeration: 'v1': 1, 'v2': 2, 'v3': 3.
mldVlanQueryInterval	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.10	integer32	read-write	This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there is no queriers in the network.
mldVlanMaxResponseTime	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.11	integer32	read-write	The maximum query response time advertised General queries on this interface.
mldVlanRobustnessValue	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.12	integer32	read-write	When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number for a specific VLAN queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds 'RobustnessValue', then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group.
mldVlanLastListenerQueryInterval	1.3.6.1.4.1.171.10.139.2.1.4.6.5.1.1.13	integer32	read-write
mldVlanMulticastGroupTable	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2		no-access	This table contains MAC based multicast forwarding information.
mldVlanMulticastGroupEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1		no-access	This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.
mldVlanMulticastGroupVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.1	integer32	read-only	VLAN ID pertaining to the Multicast forwarding entry
mldVlanMulticastGroupIpAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.2	ipv6address	read-only	Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.
mldVlanMulticastGroupReceiverPortIndex	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.3	interfaceindex	read-only	The interface on which the multicast group address is learnt.
mldVlanMulticastGroupReceiverSrcAddr	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.4	ipv6address	read-only	The IP address of the multicast receiver that has sent the multicast report to join this group.
mldVlanMulticastGroupMacAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.5	macaddress	read-only	Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.
mldVlanMulticastGroupExp	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.7	timeticks	read-only
mldVlanMulticastGroupPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.5.2.1.8	portlist	read-only	List of ports onto which the multicast data packets destined for this group will be forwarded.
mldVlanStaticMcastGrpTable	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3		no-access	This table contains IP based multicast forwarding information.
mldVlanStaticMcastGrpEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1		no-access	This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be forwarded.
mldVlanStaticMcastGrpVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.1	integer32	read-only	VLAN ID pertaining to the Multicast forwarding entry
mldVlanStaticMcastGrpGroupAddress	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.2	inetaddress	read-only	IP/IPv6 multicast group address
mldVlanStaticMcastGrpPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.3	portlist	read-write	List of ports onto which the multicast data packets destined for this source and group will be forwarded.
mldVlanStaticMcastGrpRowStatus	1.3.6.1.4.1.171.10.139.2.1.4.6.5.3.1.4	rowstatus	read-only	The row status variable, used according to row installation and removal conventions.
mldVlanRouterTable	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4		no-access	This table contains the list of ports through which a router, in a particular VLAN is reachable.
mldVlanRouterEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1		no-access	Contains the VLAN ID and list of ports on which routers are present in the VLAN.
mldVlanRouterVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.1	integer32	read-only	VLAN ID of the ports through which router is reachable.
mldVlanRouterStaticPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.2	portlist	read-write	List of static ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
mldVlanRouterBlockPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.3	portlist	read-write	List of ports which are configured statically as blocked router ports statically.
mldVlanRouterDynamicPortList	1.3.6.1.4.1.171.10.139.2.1.4.6.5.4.1.4	portlist	read-only	List of dynamic ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
mldStats	1.3.6.1.4.1.171.10.139.2.1.4.6.6
mldStatsTable	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1		no-access	This table contains snooping statistics maintained by the switch. The statistics are maintained on a per VLAN basis.
mldStatsEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1		no-access	Contains snooping statistics for a particular VLAN.
mldStatsVlanId	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.1	integer32	read-only	VLAN ID for which snooping statistics are displayed
mldStatsMLDv1RxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.2	counter32	read-only
mldStatsMLDv1RxDone	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.3	counter32	read-only
mldStatsMLDv1TxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.4	counter32	read-only
mldStatsMLDv1TxDone	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.5	counter32	read-only
mldStatsMLDv2RxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.6	counter32	read-only
mldStatsMLDv2TxReport	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.7	counter32	read-only
mldStatsRxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.8	counter32	read-only
mldStatsTxQueries	1.3.6.1.4.1.171.10.139.2.1.4.6.6.1.1.9	counter32	read-only
multicastFilterVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.6.7		no-access	A table to control multicast filtering modes.
multicastFilterVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.6.7.1		no-access	An entry appears in this table for each interface in the mcastFiltertem. Index to the table is the interface index of the VLAN.
multicastFilterVlanIndex	1.3.6.1.4.1.171.10.139.2.1.4.6.7.1.1	integer32	read-only	VLAN index of the VLAN for which the configuration in this entry applies.
multicastFilterVlanType	1.3.6.1.4.1.171.10.139.2.1.4.6.7.1.2	integer	read-write	Configures the multicast filtering modes as below : forward -Forwards all unregistered groups. filter -Filters all unregistered groups. Enumeration: 'forward': 0, 'filter': 1.
l2LLDPGroup	1.3.6.1.4.1.171.10.139.2.1.4.7
lldpState	1.3.6.1.4.1.171.10.139.2.1.4.7.1	integer	read-write	This object is used for enabling or disabling LLDP in the system. Enumeration: 'disabled': 2, 'enabled': 1.
lldpForwardState	1.3.6.1.4.1.171.10.139.2.1.4.7.2	integer	read-write	This object is used for enabling or disabling LLDP Forward State in the system. Enumeration: 'disabled': 2, 'enabled': 1.
lldpTrapState	1.3.6.1.4.1.171.10.139.2.1.4.7.3	integer	read-write	This object is used for enabling or disabling LLDP Trap State in the system. Enumeration: 'disabled': 2, 'enabled': 1.
lldpMEDTrapState	1.3.6.1.4.1.171.10.139.2.1.4.7.4	integer	read-write	This object is used for enabling or disabling LLDP-MED Trap State in the system. Enumeration: 'disabled': 2, 'enabled': 1.
lldpMsgTxInterval	1.3.6.1.4.1.171.10.139.2.1.4.7.5	integer32	read-write	This object is used for LLDP packet update frequency. The timer in units of seconds.
lldpMsgHoldMultiplier	1.3.6.1.4.1.171.10.139.2.1.4.7.6	integer32	read-write	The time-to-live value expressed as a multiple of the lldpMessageTxInterval object.The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInterval * lldpMessageTxHoldMultiplier))
lldpReinitDelay	1.3.6.1.4.1.171.10.139.2.1.4.7.7	integer32	read-write	This object is used for LLDP Reinitialization Delay. The timer in units of seconds.
lldpTxDelay	1.3.6.1.4.1.171.10.139.2.1.4.7.8	integer32	read-write	The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula: 1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval).
lldpPortConfigTable	1.3.6.1.4.1.171.10.139.2.1.4.7.10		no-access	The table that controls LLDP frame transmission on individual ports.
lldpPortConfigEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1		no-access	LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.
lldpPortConfigPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.1	lldpportnumber	no-access	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.
lldpPortConfigAdminStatus	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.2	integer	read-write	The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote systems connected. If the associated lldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will receive, but it will not transmit LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's lldpPortConfigAdminStatus becomes disabled, then the information will naturally age out. Enumeration: 'disabled': 4, 'rxOnly': 2, 'txOnly': 1, 'txAndRx': 3.
lldpPortConfigSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.3	integer	read-write	LLDP Port Settings Subtype. Enumeration: 'macAddress': 2, 'local': 1.
lldpPortConfigTLVsTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.4	bits	read-write	The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. It should be noted that the organizationally-specific TLVs are excluded from the lldpTLVsTxEnable bitmap. LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs. The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'. The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'. The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'. The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'. There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpConfigManAddrTable. The default value for lldpPortConfigTLVsTxEnable object is empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. Bits: 'sysCap': 3, 'sysName': 1, 'portDesc': 0, 'sysDesc': 2.
lldpPortStatsClear	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.5	integer32	read-write	trigger port statisc clear..
lldpPortNeighborClear	1.3.6.1.4.1.171.10.139.2.1.4.7.10.1.6	integer32	read-write	trigger port neighbor info clear..
lldpConfigManAddrTable	1.3.6.1.4.1.171.10.139.2.1.4.7.11		no-access	The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.
lldpConfigManAddrEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.11.1		no-access	LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted. Each active lldpConfigManAddrEntry must be restored from non-volatile and re-created (along with the corresponding lldpLocManAddrEntry) after a re-initialization of the management system.
lldpConfigManAddrSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.1	addressfamilynumbers	read-only	The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
lldpConfigManAddr	1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.2	inetaddress	read-only	The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.
lldpConfigManAddrPortsTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.11.1.3	lldpportlist	read-write	A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable. The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance.
lldpXdot1Objects	1.3.6.1.4.1.171.10.139.2.1.4.7.13
lldpXdot1Config	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1
lldpXdot1ConfigPortVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1		no-access	A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports.
lldpXdot1ConfigPortVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1		no-access	LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission capable ports. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding sysLLDPPortConfigEntry) after a re-initialization of the management system.
lldpXdot1ConfigVlanPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the sysLLDPPortConfigTable.
lldpXdot1ConfigPortVlanTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.1.1.2	truthvalue	read-write	The lldpXdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
lldpXdot1ConfigVlanNameTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2		no-access	The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports.
lldpXdot1ConfigVlanNameEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1		no-access	LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance will be transmitted. Each active lldpXdot1ConfigVlanNameEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocVlanNameEntry) after a re-initialization of the management system.
lldpXdot1LocConfigVlanNamePortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocPortTable.
lldpXdot1ConfigVlanNameTxEnableVlanList	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.2.1.2	octet string	read-write	The value that indicates whether the corresponding Local System VLAN name instance will be transmitted on this port
lldpXdot1ConfigProtoVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3		no-access	The table that controls selection of LLDP Port and Protocol VLAN ID TLV instances to be transmitted on individual ports.
lldpXdot1ConfigProtoVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1		no-access	LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance will be transmitted. This configuration object augments the lldpXdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpXdot1LocVlanEntry entry. Each active lldpXdot1ConfigProtoVlanEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtoVlanEntry) after a re-initialization of the management system.
lldpXdot1ConfigProtoVlanPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocPortTable.
lldpXdot1ConfigProtoVlanTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.3.1.2	truthvalue	read-write	The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance will be transmitted on the port defined by the given lldpXdot1LocProtoVlanEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
lldpXdot1ConfigProtocolTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4		no-access	The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports.
lldpXdot1ConfigProtocolEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1		no-access	LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted. Each active lldpXdot1ConfigProtocolEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtocolEntry) after a re-initialization of the management system.
lldpXdot1ConfigProtocolPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot1ConfigProtocolTable.
lldpXdot1ConfigProtocolIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.2	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
lldpXdot1ConfigProtocolTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.1.4.1.3	truthvalue	read-write	The boolean value that indicates whether the corresponding Local System Protocol Identity instance will be transmitted on the port defined by the given lldpXdot1LocProtocolEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
lldpXdot1LocalData	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2
lldpXdot1LocTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1		no-access	This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
lldpXdot1LocEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1		no-access	Information about IEEE 802.1 organizationally defined LLDP extension.
lldpXdot1LocPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot1LocTable.
lldpXdot1LocPortVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.1.1.2	integer32	read-only	The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.
lldpXdot1LocProtoVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2		no-access	This table contains one or more rows per Port and Protocol VLAN information about the local system.
lldpXdot1LocProtoVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1		no-access	Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpXdot1LocProtoVlanId, configured on the given port.
lldpXdot1LocProtoVlanPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot1LocTable.
lldpXdot1LocProtoVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.2	integer32	read-only	The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
lldpXdot1LocProtoVlanSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.3	truthvalue	read-only	The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
lldpXdot1LocProtoVlanEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.2.1.4	truthvalue	read-only	The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
lldpXdot1LocVlanNameTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3		no-access	This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent.
lldpXdot1LocVlanNameEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1		no-access	VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1LocVlanId, configured on the given port.
lldpXdot1LocVlanNamePortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot1LocVlanNameTable.
lldpXdot1LocVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.2	vlanid	read-only	The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
lldpXdot1LocVlanName	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.3.1.3	snmpadminstring	read-only	The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 2674) identified with the given lldpXdot1LocVlanId.
lldpXdot1LocProtocolTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4		no-access	This table contains one or more rows per protocol identity information on the local system known to this agent.
lldpXdot1LocProtocolEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1		no-access	Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpXdot1ProtocolIndex, and lldpLocPortNum.
lldpXdot1LocProtocolPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot1LocProtocolTable.
lldpXdot1LocProtocolIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.2	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
lldpXdot1LocProtocolId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.2.4.1.3	octet string	read-only	The octet string value used to identify the protocols associated with the given port of the local system.
lldpXdot1RemoteData	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3
lldpXdot1RemTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1		no-access	This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpXdot1RemEntries for the same local port.
lldpXdot1RemEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1		no-access	Information about a particular port component.
lldpXdot1RemTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot1RemLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpXdot1RemIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the ldpXdot1RemIndex will wrap between reboots.
lldpXdot1RemPortVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.1.1.4	integer32	read-only	The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1RemPortVlanId should be zero.
lldpXdot1RemProtoVlanTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2		no-access	This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port.
lldpXdot1RemProtoVlanEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1		no-access	Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpXdot1RemProtoVlanId, configured on the remote system.
lldpXdot1RemProtoVlanTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot1RemProtoVlanLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpXdot1RemProtoVlanIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the ldpXdot1RemIndex will wrap between reboots.
lldpXdot1RemProtoVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.4	integer32	no-access	The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpXdot1RemProtoVlanId should be zero.
lldpXdot1RemProtoVlanSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.5	truthvalue	read-only	The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
lldpXdot1RemProtoVlanEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.2.1.6	truthvalue	read-only	The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
lldpXdot1RemVlanNameTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3		no-access	This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port.
lldpXdot1RemVlanNameEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1		no-access	VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1RemVlanId, received on the given port.
lldpXdot1RemVlanNameTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot1RemVlanNameLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemVlanNameLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpXdot1RemVlanNameIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the ldpXdot1RemVlanNameIndex will wrap between reboots.
lldpXdot1RemVlanId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.4	vlanid	read-only	The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
lldpXdot1RemVlanName	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.3.1.5	snmpadminstring	read-only	The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
lldpXdot1RemProtocolTable	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4		no-access	This table contains one or more rows per protocol information about the remote system, received on the given port.
lldpXdot1RemProtocolEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1		no-access	Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpXdot1ProtocolIndex, received on the given port.
lldpXdot1RemProtocolTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot1RemProtocolLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The ldpXdot1RemProtocolLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpXdot1RemProtocolIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the ldpXdot1RemProtocolIndex will wrap between reboots.
lldpXdot1RemProtocolIdIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.4	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
lldpXdot1RemProtocolId	1.3.6.1.4.1.171.10.139.2.1.4.7.13.3.4.1.5	octet string	read-only	The octet string value used to identify the protocols associated with the given port of remote system.
lldpXdot3Objects	1.3.6.1.4.1.171.10.139.2.1.4.7.14
lldpXdot3Config	1.3.6.1.4.1.171.10.139.2.1.4.7.14.1
lldpXdot3PortConfigTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1		no-access	A table that controls selection of LLDP TLVs to be transmitted on individual ports.
lldpXdot3PortConfigEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1		no-access	LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. Each active lldpXdot3PortConfigEntry must be from non-volatile storage (along with the corresponding sysLLDPPortConfigEntry) after a re-initialization of the management system.
lldpXdot3PortConfigPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the sysLLDPPortConfigTable.
lldpXdot3PortConfigTLVsTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.1.1.1.2	bits	read-write	The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'linkAggregation(2)' indicates that LLDP agent should transmit 'Link Aggregation TLV'. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpXdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. Bits: 'powerViaMDI': 1, 'macPhyConfigStatus': 0, 'maxFrameSize': 3, 'linkAggregation': 2.
lldpXdot3LocalData	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2
lldpXdot3LocPortTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1		no-access	This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
lldpXdot3LocPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1		no-access	Information about a particular port component.
lldpXdot3LocPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocPortTable.
lldpXdot3LocPortAutoNegSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.2	truthvalue	read-only	The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
lldpXdot3LocPortAutoNegEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.3	truthvalue	read-only	The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
lldpXdot3LocPortAutoNegAdvertisedCap	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.4	octet string	read-only	This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.
lldpXdot3LocPortOperMauType	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.1.1.5	integer32	read-only	An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
lldpXdot3LocPowerTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2		no-access	This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
lldpXdot3LocPowerEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1		no-access	Information about a particular port component.
lldpXdot3LocPowerPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocPortTable.
lldpXdot3LocPowerPortClass	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.2	lldppowerportclass	read-only	The value that identifies the port Class of the given port associated with the local system.
lldpXdot3LocPowerMDISupported	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.3	truthvalue	read-only	The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
lldpXdot3LocPowerMDIEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.4	truthvalue	read-only	The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
lldpXdot3LocPowerPairControlable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.5	truthvalue	read-only	The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.
lldpXdot3LocPowerPairs	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.6	integer32	read-only	This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.
lldpXdot3LocPowerClass	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.2.1.7	integer32	read-only	This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.
lldpXdot3LocLinkAggTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3		no-access	This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
lldpXdot3LocLinkAggEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1		no-access	Link Aggregation information about a particular port component.
lldpXdot3LocLinkAggPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocPortTable.
lldpXdot3LocLinkAggStatus	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.2	lldplinkaggstatusmap	read-only	The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
lldpXdot3LocLinkAggPortId	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.3.1.3	integer32	read-only	This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero.
lldpXdot3LocMaxFrameSizeTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4		no-access	This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
lldpXdot3LocMaxFrameSizeEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1		no-access	Maximum Frame Size information about a particular port component.
lldpXdot3LocMaxFrameSizePortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1.1	lldpportnumber	read-only	The value of this object is used as a port index to the lldpXdot3LocMaxFrameSizeTable.
lldpXdot3LocMaxFrameSize	1.3.6.1.4.1.171.10.139.2.1.4.7.14.2.4.1.2	integer32	read-only	An integer value indicating the maximum supported frame size in octets on the given port of the local system.
lldpXdot3RemoteData	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3
lldpXdot3RemPortTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1		no-access	This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.
lldpXdot3RemPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1		no-access	Information about a particular physical network connection.
lldpXdot3RemTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot3RemLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpXdot3RemPortTable.
lldpXdot3RemIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpXdot3RemIndex will wrap between reboots.
lldpXdot3RemPortAutoNegSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.4	truthvalue	read-only	The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
lldpXdot3RemPortAutoNegEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.5	truthvalue	read-only	The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
lldpXdot3RemPortAutoNegAdvertisedCap	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.6	octet string	read-only	This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
lldpXdot3RemPortOperMauType	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.1.1.7	integer32	read-only	An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
lldpXdot3RemPowerTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2		no-access	This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.
lldpXdot3RemPowerEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1		no-access	Information about a particular physical network connection.
lldpXdot3RemPowerTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot3RemPowerLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpXdot3RemPortTable.
lldpXdot3RemPowerIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpXdot3RemIndex will wrap between reboots.
lldpXdot3RemPowerPortClass	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.4	lldppowerportclass	read-only	The value that identifies the port Class of the given port associated with the remote system.
lldpXdot3RemPowerMDISupported	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.5	truthvalue	read-only	The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
lldpXdot3RemPowerMDIEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.6	truthvalue	read-only	The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
lldpXdot3RemPowerPairControlable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.7	truthvalue	read-only	The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.
lldpXdot3RemPowerPairs	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.8	integer32	read-only	This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
lldpXdot3RemPowerClass	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.2.1.9	integer32	read-only	This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
lldpXdot3RemLinkAggTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3		no-access	This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system.
lldpXdot3RemLinkAggEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1		no-access	Link Aggregation information about remote system's port component.
lldpXdot3RemLinkAggTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot3RemLinkAggLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpXdot3RemPortTable.
lldpXdot3RemLinkAggIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpXdot3RemIndex will wrap between reboots.
lldpXdot3RemLinkAggStatus	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.4	lldplinkaggstatusmap	read-only	The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
lldpXdot3RemLinkAggPortId	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.3.1.5	integer32	read-only	This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero.
lldpXdot3RemMaxFrameSizeTable	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4		no-access	This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system.
lldpXdot3RemMaxFrameSizeEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1		no-access	Maximum Frame Size information about a particular port component.
lldpXdot3RemMaxFrameSizeTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXdot3RemMaxFrameSizeLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpXdot3RemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpXdot3RemPortTable.
lldpXdot3RemMaxFrameSizeIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpXdot3RemIndex will wrap between reboots.
lldpXdot3RemMaxFrameSize	1.3.6.1.4.1.171.10.139.2.1.4.7.14.3.4.1.4	integer32	read-only	An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
lldpStatistics	1.3.6.1.4.1.171.10.139.2.1.4.7.15
lldpStatsRemTablesLastChangeTime	1.3.6.1.4.1.171.10.139.2.1.4.7.15.1	timestamp	read-only	The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use this object to reduce polling of the lldpRemoteSystemsData objects.
lldpStatsRemTablesInserts	1.3.6.1.4.1.171.10.139.2.1.4.7.15.2	zerobasedcounter32	read-only	The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inserted into related tables. If partial information cannot be inserted for a reason such as lack of resources, all of the complete set of information should be removed. This counter should be incremented only once after the complete set of information is successfully recorded in all related tables. Any failures during inserting information set which result in deletion of previously inserted information should not trigger any changes in lldpStatsRemTablesInserts since the insert is not completed yet or or in lldpStatsRemTablesDeletes, since the deletion would only be a partial deletion. If the failure was the result of lack of resources, the lldpStatsRemTablesDrops counter should be incremented once.
lldpStatsRemTablesDeletes	1.3.6.1.4.1.171.10.139.2.1.4.7.15.3	zerobasedcounter32	read-only	The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of information is completely deleted from all related tables. Partial deletions, such as deletion of rows associated with a particular MSAP from some tables, but not from all tables are not allowed, thus should not change the value of this counter.
lldpStatsRemTablesDrops	1.3.6.1.4.1.171.10.139.2.1.4.7.15.4	zerobasedcounter32	read-only	The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.
lldpStatsRemTablesAgeouts	1.3.6.1.4.1.171.10.139.2.1.4.7.15.5	zerobasedcounter32	read-only	The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter.
lldpStatsTxPortTable	1.3.6.1.4.1.171.10.139.2.1.4.7.15.6		no-access	A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
lldpStatsTxPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1		no-access	LLDP frame transmission statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
lldpStatsTxPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
lldpStatsTxPortFramesTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.6.1.2	counter32	read-only	The number of LLDP frames transmitted by this LLDP agent on the indicated port.
lldpRxStatsPortTable	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7		no-access	A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
lldpRxStatsPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1		no-access	LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent. All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
lldpStatsRxPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
lldpStatsRxPortFramesDiscardedTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.2	counter32	read-only	The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the local LLDP agent in the receiving system.
lldpStatsRxPortFramesErrors	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.3	counter32	read-only	The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
lldpStatsRxPortFramesTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.4	counter32	read-only	The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
lldpStatsRxPortTLVsDiscardedTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.5	counter32	read-only	The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
lldpStatsRxPortTLVsUnrecognizedTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.6	counter32	read-only	The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port. An unrecognized TLV is referred to as the TLV whose type value is in the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized TLV may be a basic management TLV from a later LLDP version.
lldpStatsRxPortAgeoutsTotal	1.3.6.1.4.1.171.10.139.2.1.4.7.15.7.1.7	zerobasedcounter32	read-only	The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter is similar to lldpStatsRemTablesAgeouts, except that the counter is on a per port basis. This enables NMS to poll tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems on the indicated port only. This counter should be set to zero during agent initialization and its value should not be saved in non-volatile storage. When a port's admin status changes from 'disabled' to 'rxOnly', 'txOnly' or 'txAndRx', the counter associated with the same port should reset to 0. The agent should also flush all remote system information associated with the same port. This counter should be incremented only once when the complete set of information is invalidated (aged out) from all related tables on a particular port. Partial aging is not allowed, and thus, should not change the value of this counter.
lldpStatsRemTablesClear	1.3.6.1.4.1.171.10.139.2.1.4.7.15.8	integer32	read-write	clear the statisc of remote tables ,1 indicate trigger clear
lldpLocalSystemData	1.3.6.1.4.1.171.10.139.2.1.4.7.16
lldpLocChassisIdSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.16.1	lldpchassisidsubtype	read-only	The type of encoding used to identify the chassis associated with the local system.
lldpLocChassisId	1.3.6.1.4.1.171.10.139.2.1.4.7.16.2	lldpchassisid	read-only	The string value used to identify the chassis component associated with the local system.
lldpLocSysName	1.3.6.1.4.1.171.10.139.2.1.4.7.16.3	snmpadminstring	read-only	The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of sysName object.
lldpLocSysDesc	1.3.6.1.4.1.171.10.139.2.1.4.7.16.4	snmpadminstring	read-only	The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the same value of sysDesc object.
lldpLocSysCapSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.16.5	lldpsystemcapabilitiesmap	read-only	The bitmap value used to identify which system capabilities are supported on the local system.
lldpLocSysCapEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.16.6	lldpsystemcapabilitiesmap	read-only	The bitmap value used to identify which system capabilities are enabled on the local system.
lldpLocPortTable	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7		no-access	This table contains one or more rows per port information associated with the local system known to this agent.
lldpLocPortEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1		no-access	Information about a particular port component. Entries may be created and deleted in this table by the agent.
lldpLocPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.
lldpLocPortIdSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.2	integer	read-only	The type of port identifier encoding used in the associated 'lldpLocPortId' object. Enumeration: 'macAddress': 2, 'local': 1.
lldpLocPortId	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.3	octet string	read-only	The string value used to identify the port component associated with a given port in the local system.
lldpLocPortDesc	1.3.6.1.4.1.171.10.139.2.1.4.7.16.7.1.4	snmpadminstring	read-only	The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.
lldpLocManAddrTable	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8		no-access	This table contains management address information on the local system known to this agent.
lldpLocManAddrEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1		no-access	Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId. Each management address should have distinct 'management address type' (lldpLocManAddrSubtype) and 'management address' (lldpLocManAddr.) Entries may be created and deleted in this table by the agent.
lldpLocManAddrSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.1	addressfamilynumbers	read-only	The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
lldpLocManAddr	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.2	inetaddress	read-only	The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.
lldpLocManAddrLen	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.3	integer32	read-only	The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address length field is needed so that the receiving systems that do not implement SNMP will not be required to implement an iana family numbers/address length equivalency table in order to decode the management adress.
lldpLocManAddrIfSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.4	lldpmanaddrifsubtype	read-only	The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.
lldpLocManAddrIfId	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.5	integer32	read-only	The integer value used to identify the interface number regarding the management address component associated with the local system.
lldpLocManAddrOID	1.3.6.1.4.1.171.10.139.2.1.4.7.16.8.1.6	object identifier	read-only	The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.
lldpRemoteSystemsData	1.3.6.1.4.1.171.10.139.2.1.4.7.17
lldpRemTable	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1		no-access	This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present for each local port, or it may choose to maintain multiple lldpRemEntries for the same local port. The following procedure may be used to retrieve remote systems information updates from an LLDP agent: 1. NMS polls all tables associated with remote systems and keeps a local copy of the information retrieved. NMS polls periodically the values of the following objects: a. lldpStatsRemTablesInserts b. lldpStatsRemTablesDeletes c. lldpStatsRemTablesDrops d. lldpStatsRemTablesAgeouts e. lldpStatsRxPortAgeoutsTotal for all ports. 2. LLDP agent updates remote systems MIB objects, and sends out notifications to a list of notification destinations. 3. NMS receives the notifications and compares the new values of objects listed in step 1. Periodically, NMS should poll the object lldpStatsRemTablesLastChangeTime to find out if anything has changed since the last poll. if something has changed, NMS will poll the objects listed in step 1 to figure out what kind of changes occurred in the tables. if value of lldpStatsRemTablesInserts has changed, then NMS will walk all tables by employing TimeFilter with the last-polled time value. This request will return new objects or objects whose values are updated since the last poll. if value of lldpStatsRemTablesAgeouts has changed, then NMS will walk the lldpStatsRxPortAgeoutsTotal and compare the new values with previously recorded ones. For ports whose lldpStatsRxPortAgeoutsTotal value is greater than the recorded value, NMS will have to retrieve objects associated with those ports from table(s) without employing a TimeFilter (which is performed by specifying 0 for the TimeFilter.) lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops objects are provided for informational purposes.
lldpRemEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1		no-access	Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
lldpRemTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpRemLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpRemIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
lldpRemChassisIdSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.4	lldpchassisidsubtype	read-only	The type of encoding used to identify the chassis associated with the remote system.
lldpRemChassisId	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.5	lldpchassisid	read-only	The string value used to identify the chassis component associated with the remote system.
lldpRemPortIdSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.6	lldpportidsubtype	read-only	The type of port identifier encoding used in the associated 'lldpRemPortId' object.
lldpRemPortId	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.7	lldpportid	read-only	The string value used to identify the port component associated with the remote system.
lldpRemPortDesc	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.8	snmpadminstring	read-only	The string value used to identify the description of the given port associated with the remote system.
lldpRemSysName	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.9	snmpadminstring	read-only	The string value used to identify the system name of the remote system.
lldpRemSysDesc	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.10	snmpadminstring	read-only	The string value used to identify the system description of the remote system.
lldpRemSysCapSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.11	lldpsystemcapabilitiesmap	read-only	The bitmap value used to identify which system capabilities are supported on the remote system.
lldpRemSysCapEnabled	1.3.6.1.4.1.171.10.139.2.1.4.7.17.1.1.12	lldpsystemcapabilitiesmap	read-only	The bitmap value used to identify which system capabilities are enabled on the remote system.
lldpRemManAddrTable	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2		no-access	This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.
lldpRemManAddrEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1		no-access	Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemManLocalPortNum of the local system. Each management address should have distinct 'management address type' (lldpRemManAddrSubtype) and 'management address' (lldpRemManAddr.) Entries may be created and deleted in this table by the agent.
lldpRemManTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpRemManLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemManLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpRemManIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemManIndex will wrap between reboots.
lldpRemManAddrSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.4	addressfamilynumbers	read-only	The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.
lldpRemManAddr	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.5	inetaddress	read-only	The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.
lldpRemManAddrIfSubtype	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.6	lldpmanaddrifsubtype	read-only	The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
lldpRemManAddrIfId	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.7	integer32	read-only	The integer value used to identify the interface number regarding the management address component associated with the remote system.
lldpRemManAddrOID	1.3.6.1.4.1.171.10.139.2.1.4.7.17.2.1.8	object identifier	read-only	The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
lldpRemUnknownTLVTable	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3		no-access	This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic management set. This table should only contain TLVs that are found in a single LLDP frame. Entries in this table, associated with an MAC service access point (MSAP, the access point for MAC services provided to the LCC sublayer, defined in IEEE 100, which is also identified with a particular lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with most recently received unrecognized TLV from the same MSAP, or they will naturally age out when the rxInfoTTL timer (associated with the MSAP) expires.
lldpRemUnknownTLVEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1		no-access	Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
lldpRemUnknownTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpRemUnknownLocalPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemUnknownLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
lldpRemUnknownIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemUnknownIndex will wrap between reboots.
lldpRemUnknownTLVType	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.4	integer32	read-only	This object represents the value extracted from the type field of the TLV.
lldpRemUnknownTLVInfo	1.3.6.1.4.1.171.10.139.2.1.4.7.17.3.1.5	octet string	read-only	This object represents the value extracted from the value field of the TLV.
lldpXMedNotifications	1.3.6.1.4.1.171.10.139.2.1.4.7.18
lldpXMedTopologyChangeDetected	1.3.6.1.4.1.171.10.139.2.1.4.7.18.1			A notification generated by the local device sensing a change in the topology that indicates that a new remote device attached to a local port, or a remote device disconnected or moved from one port to another.
lldpXMedObjects	1.3.6.1.4.1.171.10.139.2.1.4.7.19
lldpXMedConfig	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1
lldpXMedLocDeviceClass	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.1	lldpxmeddeviceclass	read-only	Local Device Class.
lldpXMedPortConfigTable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2		no-access	A table that controls selection of LLDP TLVs to be transmitted on individual ports.
lldpXMedPortConfigEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1		no-access	LLDP configuration information that controls the transmission of the MED organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXMedPortConfigEntry must be stored and retrieved from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
lldpXMedPortConfigPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the sysLLDPPortConfigTable.
lldpXMedPortCapSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.2	lldpxmedcapabilities	read-only	The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent supports the corresponding TLV.
lldpXMedPortConfigTLVsTxEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.3	lldpxmedcapabilities	read-write	The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent will send the corresponding TLV if the respective capability is supported per port. Setting a bit with in this object for a non-supported capability shall have no functional effect and will result in an inconsistent value error returned to the management application. There are other rules and restrictions that prevent arbitrary combinations of TLVs to be enabled on LLDP-MED devices according to the device classes. These rules are defined in Section 10.2.1, Tables 5 - 9 of ANSI/TIA-1057. In case a management application attempts to set this object to a value that does not follow the rules, the set operation shall have and will result in an inconsistent value error returned to the management application. Setting this object to an empty set is valid and effectively disables LLDP-MED on a per-port basis by disabling transmission of all MED organizational TLVs. In this case the remote tables objects in the LLDP-MED MIB corresponding to the respective port will not be populated. The default value for lldpXMedPortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
lldpXMedPortConfigNotifEnable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.2.1.4	truthvalue	read-write	A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port.
lldpXMedFastStartRepeatCount	1.3.6.1.4.1.171.10.139.2.1.4.7.19.1.3	unsigned32	read-write	The number of times the fast start LLDPDU are being sent during the activation of the fast start mechanism defined by LLDP-MED.
lldpXMedLocalData	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2
lldpXMedLocMediaPolicyTable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1		no-access	This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to this agent.
lldpXMedLocMediaPolicyEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1		no-access	Information about a particular policy on a specific port component.
lldpXMedLocMediaPolicyPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.1	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.
lldpXMedLocMediaPolicyAppType	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.2	policyapptype	no-access	The media type that defines the primary function of the application for the policy advertised by an endpoint.
lldpXMedLocMediaPolicyVlanID	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.3	integer32	read-only	An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use.
lldpXMedLocMediaPolicyPriority	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.4	integer32	read-only	This object contains the value of the 802.1p priority which is associated with the given port on the local system.
lldpXMedLocMediaPolicyDscp	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.5	dscp	read-only	This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.
lldpXMedLocMediaPolicyUnknown	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.6	truthvalue	read-only	A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined
lldpXMedLocMediaPolicyTagged	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.1.1.7	truthvalue	read-only	A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
lldpXMedLocHardwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.2	snmpadminstring	read-only	The vendor-specific hardware revision string as advertised by the endpoint.
lldpXMedLocFirmwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.3	snmpadminstring	read-only	The vendor-specific firmware revision string as advertised by the endpoint.
lldpXMedLocSoftwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.4	snmpadminstring	read-only	The vendor-specific software revision string as advertised by the endpoint.
lldpXMedLocSerialNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.5	snmpadminstring	read-only	The vendor-specific serial number as advertised by the endpoint.
lldpXMedLocMfgName	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.6	snmpadminstring	read-only	The vendor-specific manufacturer name as advertised by the endpoint.
lldpXMedLocModelName	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.7	snmpadminstring	read-only	The vendor-specific model name as advertised by the endpoint.
lldpXMedLocAssetID	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.8	snmpadminstring	read-only	The vendor-specific asset tracking identifier as advertised by the endpoint.
lldpXMedLocXPoEDeviceType	1.3.6.1.4.1.171.10.139.2.1.4.7.19.2.10	integer	read-only	Defines the type of Power-via-MDI (Power over Ethernet) advertised by the local device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A value pdDevice(3) indicates that the device is advertised as a Powered Device (PD). A value of none(4) indicates that the device does not support PoE. Enumeration: 'unknown': 1, 'pdDevice': 3, 'pseDevice': 2, 'none': 4.
lldpXMedRemoteData	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3
lldpXMedRemCapabilitiesTable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1		no-access	A table that displays LLDP-MED capabilities of remote devices connected to individual ports.
lldpXMedRemCapabilitiesEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1		no-access	LLDP-MED capabilities of remote devices connected to the device ports and communicating via LLDP-MED. The remote tables in the LLDP-MED MIB excepting this table may be sparsely populate. An entry in one of these table is meaningful and shall be populated by the agent only if the corresponding bits for the respective function are set in the objects in this table.
lldpXMedRemCapTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXMedRemCapPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.
lldpXMedRemCapIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
lldpXMedRemCapSupported	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.1.1.4	lldpxmedcapabilities	read-only	The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subtype associated with a specific TIA TR41.4 MED optional TLV. If the bit is set, the agent has the capability to support the corresponding TLV.
lldpXMedRemMediaPolicyTable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2		no-access	This table contains media policy information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the networkPolicy(0) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set.
lldpXMedRemMediaPolicyEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1		no-access	Information about the per port per policy type policy information for a particular physical network connection.
lldpXMedRemMediaPolicyTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXMedRemMediaPolicyPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.
lldpXMedRemMediaPolicyIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
lldpXMedRemMediaPolicyAppType	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.4	policyapptype	no-access	The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.
lldpXMedRemMediaPolicyVlanID	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.5	integer32	read-only	An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using priority tagged frames, meaning that only the 802.1p priority level is significant and the default VID of the ingress port is being used instead. A value of 4095 is reserved for implementation use.
lldpXMedRemMediaPolicyPriority	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.6	integer32	read-only	This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.
lldpXMedRemMediaPolicyDscp	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.7	dscp	read-only	This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.
lldpXMedRemMediaPolicyUnknown	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.8	truthvalue	read-only	A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' indicates that this network policy is defined.
lldpXMedRemMediaPolicyTagged	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.2.1.9	truthvalue	read-only	A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN operation. In this case, both the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has relevance
lldpXMedRemInventoryTable	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3		no-access	This table contains inventory information as advertised by the remote system. This table may be sparsely populated. Entries in this table are relevant only if the inventory(2) bits in the lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the corresponding ports are set
lldpXMedRemInventoryEntry	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1		no-access	Information about inventory information for the remote devices connected to the ports.
lldpXMedRemTimeMark	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.1	timefilter	read-only	A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
lldpXMedRemPortNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.2	lldpportnumber	read-only	The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpLocPortTable.
lldpXMedRemIndex	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.3	integer32	read-only	This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
lldpXMedRemHardwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.4	snmpadminstring	read-only	The vendor-specific hardware revision string as advertised by the remote endpoint.
lldpXMedRemFirmwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.5	snmpadminstring	read-only	The vendor-specific firmware revision string as advertised by the remote endpoint.
lldpXMedRemSoftwareRev	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.6	snmpadminstring	read-only	The vendor-specific software revision string as advertised by the remote endpoint.
lldpXMedRemSerialNum	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.7	snmpadminstring	read-only	The vendor-specific serial number as advertised by the remote endpoint.
lldpXMedRemMfgName	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.8	snmpadminstring	read-only	The vendor-specific manufacturer name as advertised by the remote endpoint.
lldpXMedRemModelName	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.9	snmpadminstring	read-only	The vendor-specific model name as advertised by the remote endpoint.
lldpXMedRemAssetID	1.3.6.1.4.1.171.10.139.2.1.4.7.19.3.3.1.10	snmpadminstring	read-only	The vendor-specific asset tracking identifier as advertised by the remote endpoint.
dlinkL3Features	1.3.6.1.4.1.171.10.139.2.1.5
l3ARPGroup	1.3.6.1.4.1.171.10.139.2.1.5.1
arpAgingTime	1.3.6.1.4.1.171.10.139.2.1.5.1.1
arpAgingTimeTable	1.3.6.1.4.1.171.10.139.2.1.5.1.1.1		no-access	The table of ARP Aging Time.
arpAgingTimeEntry	1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1		no-access	The list of snmp view tree entry.
arpAgingTimeIntrefaceID	1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1.1	integer32	read-only	A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
arpAgingTimeTimeout	1.3.6.1.4.1.171.10.139.2.1.5.1.1.1.1.2	integer32	read-write	ARP Aging Time Timeout (min).
arpARPTable	1.3.6.1.4.1.171.10.139.2.1.5.1.2
arpTable	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1		no-access	A table to control ARP Spoofing prevention for the entire switch or for each interface in the switch.
arpEntry	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1		no-access	An entry appears in this table for each interface in the system.
arpIntrefaceID	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.1	integer32	read-only	Proxy ARP VLAN Interface.
arpIpAddr	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.2	ipaddress	read-only	Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'.
arpMacAddress	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.3	macaddress	read-write	Ethernet Mac Address.
arpType	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.4	integer	read-write	ARP Table Type. Enumeration: 'static': 4, 'other': 1, 'dynamic': 3, 'invalid': 2.
arpRowStatus	1.3.6.1.4.1.171.10.139.2.1.5.1.2.1.1.5	rowstatus	read-only	ARP Table RowStatus.
l3IpMgmtGroup	1.3.6.1.4.1.171.10.139.2.1.5.3
multiIfMainTable	1.3.6.1.4.1.171.10.139.2.1.5.3.1		no-access	A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table is a proprietary extension to the standard ifTable and ifXTable. The index to this table has the semantics of the MIB-2 ifIndex.
multiIfMainEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1		no-access	An entry containing management information applicable to a particular interface.
multiIfMainIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.1	interfaceindex	read-only	A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
multiIfMainAdminStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.2	integer	read-only	The desired state of the interface. This object can be set only when the ifMainRowStatus of the interface is active. This object has the semantics of the ifAdminStatus of the standard ifTable. When a managed system initializes, all interfaces start with ifMainAdminStatus in the down(2) state, it's a default state also. As a result of either explicit management action or per configuration information retained by the managed system, ifMainAdminStatus is then changed to the up (1) state (or remains in the down(2) state). Enumeration: 'down': 2, 'up': 1.
multiIfMainOperStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.3	integer	read-only	The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported currently. If ifMainAdminStatus is down (2) then ifMainOperStatus would be down (2). If ifMainAdminStatus is changed to up (1) then ifMainOperStatus should change to up (1) if the interface is ready to transmit and receive work traffic; it should change to dormant (5) the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should change to lowerLayerDown(7) state if it cannot be made up as the interface sub-layer below it is down; it should remain in the down (2) state if and only if there is a fault that prevents it from going to the up (1) state; it should remain in the notPresent (6) state if the interface has missing (typically, hardware) components. The status unknown(4) is shown when it is not possible to determine the exact status of the interface - e.g. the interface sub-layer is performing negotiations - during this period the interface is not up but at the same time, it is not a fault condition and hence it cannot be shown as down - in such periods the status is shown as unknown. This object has the semantics of the ifOperStatus of the standard ifTable. Enumeration: 'dormant': 5, 'lowerLayerDown': 7, 'unknown': 4, 'testing': 3, 'up': 1, 'down': 2, 'notPresent': 6.
multiIfIpBindVlanId	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.4	integer32	read-write	the IP Interface over the Vlan Interface which it vlan id is the configure Vlan id.
multiL3VlanIfName	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.5	displaystring	read-only	the L3 Vlan Interface Name.
multiIfMainRowStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.1.1.6	rowstatus	read-only	A RowStatus variable for addition, deletion and in-activation of the interfaces. Specification of the object is mandatory for all interfaces. When the status is active, the interface is created and ready to use in the respective protocol modules. When the status is notInService, the interface has not been registered with the respective protocol modules and as such those modules are not aware of the existence of the interface - creation is hence, incomplete. Setting an active interface to notInService results in de-registration/deletion of the interface from the respective protocol modules and all the configurations associated with that interface in those modules may be lost. Deletion of an interface, may affect the status of other interfaces which are layered above or below it in the Interface Stack (ifStackTable) and may result in other interfaces being made notReady or notInService.
multiIfIpTable	1.3.6.1.4.1.171.10.139.2.1.5.3.2		no-access	A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over the network interfaces in the system. This table is a extension to the ifMainTable. The index to this table has the semantics of the ifMainIndex of the ifMainTable. Entries are created automatically in this table for any interface sub-layer which is layer below IP using the ifStackTable. Similarly, entries are deleted from this table when the interface's layering below IP is removed.
multiIfIpEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.2.1		no-access	An entry containing management information applicable to a particular interface over which IP is operating.
multiIfIpIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.1	interfaceindex	read-only	A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
multiIfIpAddrAllocMethod	1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.2	integer	read-write	The mechanism to be used for allocation of IP address for this interface. If the method specified is manual and the IP address is not provided (then the interface would be treated as a un-numbered interface. The dynamic(2) option takes an IP address dynamically from the available server (dhcp/bootp/rarp) . Enumeration: 'dynamic': 2, 'manual': 1.
multiIfIpAddr	1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.3	ipaddress	read-write	Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PPP link - not under MP, MP interface and X.25 VC). If the interface is not a network interface then the default value of 0.0.0.0 is assigned and the interface is treated as a un-numbered interface by IP.
multiIfIpSubnetMask	1.3.6.1.4.1.171.10.139.2.1.5.3.2.1.4	ipaddress	read-write	Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, this object takes the default subnet mask value based on the class of the IP address configured for the interface.
multiRouteTable	1.3.6.1.4.1.171.10.139.2.1.5.3.3		no-access	This entity's IP Routing table. This table can be used to view all the routes present in the system
multiRouteEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1		no-access	A particular route to a particular destina- tion, under a particular policy.
multiRouteDest	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.1	ipaddress	no-access	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the RouteMask object is not equal to x.
multiRouteMask	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.2	ipaddress	no-access	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the RouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the RouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the RouteDest object is not equal to fsRoute- Dest.
multiRouteTos	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.3	integer32	no-access	The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ \| \| \| \| \| PRECEDENCE \| TYPE OF SERVICE \| 0 \| \| \| \| \| +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
multiRouteNextHop	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.4	ipaddress	no-access	On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
multiRouteIfIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.5	integer32	read-only	The ifIndex value which identifies the local interface through which the next hop of this route should be reached. 0 indicate invalid interface
multiRouteStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.3.1.6	rowstatus	read-only	The row status variable, used according to row installation and removal conventions.
multiIpv6IfTable	1.3.6.1.4.1.171.10.139.2.1.5.3.4		no-access	The IPv6 Interface table contains information on the entity's internetwork-layer interfaces on which IPv6. protocol is enabled. An IPv6 interface constitutes a logical network layer attachment to the layer immediately below IPv6. These include LAN interfaces, Point-to-Point interfaces, NBMA interfaces and IPv6 over IPv4 Tunnel interfaces.
multiIpv6IfEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.4.1		no-access	An interface entry containing objects about a particular IPv6 interface. The entry is created or deleted from SNMP.
multiIpv6IfIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.1	interfaceindex	read-only	A unique value identifying the particular IPv6 interface.
multiIpv6IfAdminStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.2	integer	read-write	Indicates whether IPv6 is enabled/disabled on this interface. When lower layer indicates the creation of the interface, an entry will be create in IPv6 interfac table with fsipv6IfAdminStatus in down(2) state. Either on setting this object as up(1) or configuring any IPv6 address over this interface, will set the fsipv6IfAdminStatus to up(1) state. If this object is set to down(2), and if no IPv6 address is configured for this interface, fsipv6IfAdminStatus goes down(2). Else the Status remains up(1), as long as the IPv6 address are present. Once these addresses are removed, the status goes to down(2). Enumeration: 'down': 2, 'up': 1.
multiIpv6IfOperStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.3	integer	read-only	The operational state of interface. It is up(1) if the fsipv6IfAdminStatus is 'up' and the layer below the network layer is also operational. Otherwise it is down(2). Enumeration: 'down': 2, 'stale': 3, 'up': 1.
multiIpv6IfRetransmitTime	1.3.6.1.4.1.171.10.139.2.1.5.3.4.1.4	integer32	read-write	The retransmit time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds between retransmitted Neighbor Solicitations and is used during address resolution, unreachability detection and duplicate address detection.
multiIpv6AddrTable	1.3.6.1.4.1.171.10.139.2.1.5.3.5		no-access	The table containing entity's IPv6 addressing information.
multiIpv6AddrEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1		no-access	The entry in the IPv6 Address Table which defines a unicast, anycast or link-local address on an IPv6 interface.
multiIpv6AddrIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.1	interfaceindex	read-only	The index value which uniquely identifies the IPv6 interface on which this IPv6 address entry exists. The interface identified by a particular value of this index is the same interface as identified by the same value of fsipv6IfIndex.
multiIpv6AddrAddress	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.2	ipv6address	read-only	The IPv6 address to which this entry's addressing information pertains.
multiIpv6AddrPrefixLen	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.3	integer32	read-only	The length of the prefix (in bits) associated with the IPv6 address of this entry. For a link-local address, the prefix is always start with '0xfe80' and the prefix length is 128 bits.
multiIpv6AddrAdminStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.4	rowstatus	read-only	Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the address may trigger IPv6 to be disabled on the interface. NotInService value is not supported.
multiIpv6AddrType	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.5	integer	read-write	Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address while a link-local address has the prefix '0xfe80'. This object can be modified only if fsipv6AddrOperStatus is down. Enumeration: 'unicast': 1, 'linklocal': 3, 'anycast': 2.
multiIpv6AddrCfgMethod	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.6	integer	read-only	Indicates the configuration method of the address. static(1) indicates that this address is configured by user; stateless(2) indicates that this address is auto configured stateless; stateful(3) indicates that this address is auto configured when DHCPv6 server reply Enumeration: 'stateful': 3, 'stateless': 2, 'static': 1, 'dynamic': 4.
multiIpv6AddrOperStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.5.1.7	integer	read-only	Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfaces on which Duplicate Address Detection is not performed, this object will take values only complete(2) and down(3). Enumeration: 'down': 3, 'failed': 4, 'complete': 2, 'tentative': 1.
multiIPv6neighborTable	1.3.6.1.4.1.171.10.139.2.1.5.3.6		no-access	A list of the Neighbor Cache Table.
multiIpv6NeighborEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1		no-access	A Neighbor cache entry containing the ifindex and ipv6 addr.
multiIpv6NeighborIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.1	integer	read-only	The interface index of the Neighbor entry.
multiIpv6NeighborAddr	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.2	ipv6address	read-only	Allows the entry of an IP address that will be a Neighbor entry into the Neighbor Cache Table.
multiIpv6NeighborMacAddr	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.3	macaddress	read-write	The MAC address associated of the Neighbor entry.
multiIpv6NeighborType	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.4	integer	read-only	The type associated of the Neighbor entry. Enumeration: 'dynamic': 2, 'static': 1.
multiIpv6NeighborCacheState	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.5	integer	read-only	The type associated of the Neighbor entry. Enumeration: 'probe': 6, 'notinservice': 7, 'delay': 5, 'reachable': 2, 'static': 1, 'stale': 4, 'incomplete': 3.
multiIpv6NeighborRowStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.6.1.6	rowstatus	read-write	The status of an entry in the Neighbor Cache Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.
multiIpv6RouteTable	1.3.6.1.4.1.171.10.139.2.1.5.3.7		no-access	This table contains dynamic routes that are learnt through dynamic routing protocol as well as local routes derived from configured address prefixes and statically configured routes.
multiIpv6RouteEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1		no-access	An entry in the IPv6 Routing Table. An entry can be created by means of the routing protocol, derived from configured address prefixes as well as statically configured. There can be a static route as well as dynamic routes with the same destination and prefix length.
multiIpv6RouteDest	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.1	ipv6address	read-only	The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value.
multiIpv6RoutePfxLength	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.2	integer32	read-only	Indicates the prefix length of the destination address.
multiIpv6RouteProtocol	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.3	integer	read-only	The routing mechanism via which this route was learned. Enumeration: 'dynamic': 2, 'static': 1.
multiIpv6RouteNextHop	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.4	ipv6address	read-only	Next hop IPv6 Address for this route. For direct routes it has the value ::0.
multiIpv6RouteIfIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.5	interfaceindex	read-write	The index value which uniquely identifies the interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex.
multiIpv6RouteAdminStatus	1.3.6.1.4.1.171.10.139.2.1.5.3.7.1.6	rowstatus	read-only	Administrative Status of the route. This object is used to create or delete the route entry. The ipv6RouteIfIndex needs to be set, before the route entry is made active. CreateAndGo is not supported.
dhcpClientTable	1.3.6.1.4.1.171.10.139.2.1.5.3.8		no-access	The dhcp options which are to be added to packets sent will be added as entries in this table. While sending out discover message, the options entries which are avilable in this table will be added with discover message.
dhcpClientEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1		no-access	An entry containing dhcp options which will be added to the packets from client to server.
dhcpClientIfIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.1	interfaceindex	read-only	A unique identifier for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable.
dhcpClientClientIdIfIdx	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.2	interfaceindex	read-write	This object indicates ifIndex of the VLAN interface whose hexadecimal MAC address will be used as the client ID to be sent with the DISCOVER message 0 indicates that preferred client id is unspecified
dhcpClientClassIdType	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.3	integer	read-write	The object indicates the type of class id which is defined by dhcpClientClassIdValue. The value means : ascii(1)- The dhcpClientClassIdValue is ascii string. hex(2) - The dhcpClientClassIdValue is a string of HEX number. Enumeration: 'hex': 2, 'ascii': 1.
dhcpClientClassId	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.4	octet string	read-write	This object indicates the value of vendor class identifier (option 60) to be sent with the DHCP DISCOVER message. An dhcpClientClassIdValue value is always interpreted within the context of an dhcpClientClassIdType value. If dhcpClientClassIdType is 'hex', this object is a HEX string value, which is restricted to hexadecimal character set. length is equal to 0 indicates that preferred class id is unspecified
dhcpClientHostName	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.5	displaystring	read-write	This object indicates the host name. The host name must start with a letter, end with a letter or digit, and only with interior characters letters, digits, and hyphens. length is equal to 0 indicates that preferred host name is unspecified
dhcpClientLeaseDay	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.6	integer32	read-write	This object indicates the number of days for the duration of preferred lease time. Value of -1 indicates that preferred lease time is unspecified. This value is checked when an IP address is acquired from a DHCP server.
dhcpClientLeaseHour	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.7	unsigned32	read-write	This object indicates the number of hours for the duration of preferred lease time.
dhcpClientLeaseMinute	1.3.6.1.4.1.171.10.139.2.1.5.3.8.1.8	unsigned32	read-write	This object indicates the number of minutes for the duration of preferred lease time.
dhcp6ClientTable	1.3.6.1.4.1.171.10.139.2.1.5.3.9		no-access	A table contains all DHCPv6 client entries which consists of DHCPv6 client related configuration. An entry is created to set a value different from the default on an interface.
dhcp6ClientEntry	1.3.6.1.4.1.171.10.139.2.1.5.3.9.1		no-access	Defines an entry in the dhcp6ClientTable.
dhcp6ClientIndex	1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.1	interfaceindex	no-access	The ifIndex value of the interface. Only VLAN interfaces are valid interfaces.
dhcp6ClientEnabled	1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.2	integer	read-write	This object indicates whether acquires an IPv6 address on an interface from the DHCPv6 server. Enumeration: 'disabled': 2, 'enabled': 1.
dhcp6ClientRapidCommit	1.3.6.1.4.1.171.10.139.2.1.5.3.9.1.3	integer	read-write	This object indicates whether the two-message exchange for address allocation and other configuration is used. When dhcp6ClientEnabled is 'false', dhcp6ClientRapidCommit cannot be set to 'true'. Enumeration: 'disabled': 2, 'enabled': 1.
dlinkQoS	1.3.6.1.4.1.171.10.139.2.1.6
qosBasicSettingsGroup	1.3.6.1.4.1.171.10.139.2.1.6.1
qosBasPortDefaultCoS	1.3.6.1.4.1.171.10.139.2.1.6.1.1
qosPortDefaultCoSTable	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1		no-access	This table of Port Default CoS.
qosPortDefaultCoSEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1		no-access	An entry configures the Port Default CoS.
qosPortindex	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosPortDefMode	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.2	integer	read-write	This object indicates the mechanism of QoS scheduling on the interface. Enumeration: 'none': 2, 'defaultCoS': 1.
qosPortDefCos	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.3	integer32	read-only	Port Default CoS. Indicates the Default CoS.
qosPortDefOverride	1.3.6.1.4.1.171.10.139.2.1.6.1.1.1.1.4	integer	read-write	Port Default CoS. Override Enumeration: 'disabled': 2, 'enabled': 1.
qosBasPortScheMethod	1.3.6.1.4.1.171.10.139.2.1.6.1.2
qosPortSchedulerMethodTable	1.3.6.1.4.1.171.10.139.2.1.6.1.2.1		no-access	This table consists of a list of scheduling mechanism configurations for ports.
qosPortSchedulerMethodEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1		no-access	An entry configures the scheduling mode on an interface.
qosSchedulingModeBasePort	1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosSchedulingMode	1.3.6.1.4.1.171.10.139.2.1.6.1.2.1.1.2	integer	read-write	This object indicates the mechanism of QoS scheduling on the interface. Enumeration: 'sp': 1, 'wrr': 3, 'wdrr': 4, 'rr': 2.
qosBasQueueSettings	1.3.6.1.4.1.171.10.139.2.1.6.1.3
qosQueueSettingsTable	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1		no-access	This table consists of a list of configurations for WRR queue bandwidth of queues.
qosQueueSettingsEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1		no-access	An entry defines WRR weight of a queue on an interface. An entry exists for each queue if the WRR bandwidth is configurable on the queue.
qosQueueBasePort	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosQueueID	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.2	integer	read-only	This object indicates the queue ID of the entry.
qosQueueWrrWeight	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.3	integer	read-write	This object indicates the WRR Weight.
qosQueueQuantum	1.3.6.1.4.1.171.10.139.2.1.6.1.3.1.1.4	integer	read-write	This object indicates the WDRR Quantum.
qosBasCoS2QueueMapping	1.3.6.1.4.1.171.10.139.2.1.6.1.4
qosCoS2QueueTable	1.3.6.1.4.1.171.10.139.2.1.6.1.4.1		no-access	The table of CoS to Queue Mapping.
qosCoS2QueueEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1		no-access	The list of CoS to Queue Mapping entry.
qosCoS2QueCos	1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1.1	integer32	read-only	CoS to Queue Mapping. CoS.
qosCos2QueQueueID	1.3.6.1.4.1.171.10.139.2.1.6.1.4.1.1.2	integer32	read-write	CoS to Queue Mapping. Queue ID.
qosBasPortRateLimiting	1.3.6.1.4.1.171.10.139.2.1.6.1.5
qosPortRateLimitingTable	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1		no-access	This table consists of Port Rate Limiting.
qosPortRateLimitingEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1		no-access	An entry configures the Port Rate Limiting.
qosBandwidthBasePort	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosBandwidthRxRate	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.2	integer32	read-write	Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed. if qosBandwidthRxRateMode is rate, range is 64 ~ 10000000 and qosBandwidthRxRateMode is percent, range is 1 ~ 100.
qosBandwidthRxRateMode	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.3	integer	read-write	Indicates the Minimum Rate Mode. It will indicate the field:qosBandwidthRxRate attribute. rate: means the Minimum Rate. percent: means the percentage. Enumeration: 'rate': 1, 'percent': 2.
qosBandwidthRxBurst	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.4	integer32	read-write	Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interface speed. Based on the operating speed of the port, the burst size of the port will be applied. This value can also be affected by the metering.
qosBandwidthTxRate	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.5	integer32	read-write	Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed. if qosBandwidthTxRateMode is rate, range is 64 ~ 10000000 and qosBandwidthTxRateMode is percent, range is 1 ~ 100.
qosBandwidthTxRateMode	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.6	integer	read-write	Indicates the Minimum Rate Mode. It will indicate the field:qosBandwidthTxRate attribute. rate: means the Minimum Rate. percent: means the percentage. Enumeration: 'rate': 1, 'percent': 2.
qosBandwidthTxBurst	1.3.6.1.4.1.171.10.139.2.1.6.1.5.1.1.7	integer32	read-write	Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interface speed. Based on the operating speed of the port, the burst size of the port will be applied. This value can also be affected by the metering.
qosBasQueueRateLimiting	1.3.6.1.4.1.171.10.139.2.1.6.1.6
qosQueueRateLimitingTable	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1		no-access	A table contains information about Queue Rate Limiting.
qosQueueRateLimitingEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1		no-access	An entry contains bandwidth control information of Queue Rate Limiting.
qosQueueBandwidthBasePort	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosQueueBandwidthQueId	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.2	unsigned32	read-only	Indicates the queue ID of the entry.
qosQueueBandwidthMinRate	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.3	integer32	read-write	Indicates the minimum rate of the specified port and queue. It is based on the dQosQueueBandwidthMinRateMode field and if the dQosQueueBandwidthMinRateMode selected as: rate: means egress Minimum Rate (units:kbps),range are 64 ~ 10000000. percent: means the percentage and the effective rangs are 1 ~ 100. 0 means disabled rate limit.
qosQueueBandwidthMaxRate	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.4	integer32	read-write	Indicates the maximum rate of the specified port and queue. It is based on the dQosQueueBandwidthMaxRateMode field and if the dQosQueueBandwidthMaxRateMode selected as: rate: means egress Maximum Rate (units:kbps),range are 64 ~ 10000000. percent: means the percentage and the effective rangs are 1 ~ 100. 0 means disabled rate limit.
qosQueueBandwidthRateMode	1.3.6.1.4.1.171.10.139.2.1.6.1.6.1.1.5	integer	read-write	Indicates the Minimum Rate Mode. It will indicate the field:dQosQueueBandwidthMinRate attribute. rate: means the Minimum Rate. percent: means the percentage. Enumeration: 'rate': 1, 'percent': 2.
qosBasDscpMapCos	1.3.6.1.4.1.171.10.139.2.1.6.1.7
qosDscpMapCosTable	1.3.6.1.4.1.171.10.139.2.1.6.1.7.1		no-access	This table of Port Default CoS.
qosDscpMapCosEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1		no-access	An entry configures the Port Default CoS.
qosPortIndex	1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1.1	integer32	read-only	Interface index of the port for which the configuration in this entry applies.
qosTrustMode	1.3.6.1.4.1.171.10.139.2.1.6.1.7.1.1.2	integer	read-write	The QoS port trust mode. Enumeration: 'cos': 0, 'dscp': 1.
qosDscpValueMapCosTable	1.3.6.1.4.1.171.10.139.2.1.6.1.7.2		no-access	This table of Port Default CoS.
qosDscpValueMapCosEntry	1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1		no-access	An entry configures the Port Default CoS.
qosDscpPort	1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.1	integer32	read-only	The DSCP port index.
qosDscpCos	1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.2	integer32	read-only	The CoS value.
qosDscpMapCosList	1.3.6.1.4.1.171.10.139.2.1.6.1.7.2.1.3	portlist	read-write	The DSCP value list mapping to CoS.
dlinkACL	1.3.6.1.4.1.171.10.139.2.1.7
aclGroup	1.3.6.1.4.1.171.10.139.2.1.7.1
aclProfile	1.3.6.1.4.1.171.10.139.2.1.7.1.1
aclProfileTable	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1		no-access	A table to ACL profile .
aclProfileEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1		no-access	Each entry in this table is a ACL profile. Index to the table is ACL profile ID.
aclProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.1	integer32	read-only	The ACL Profile ID. The ID 1 to 50 is user-defined ACL, and the ID more than 50 is reserved for system-defined ACL. The user only allow to create user-defined ACL ID. And system-defined ACL is read only.
aclProfileName	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.2	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclProfileType	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.3	integer	read-write	The ACL Profile type, possible value are l2 (1) - for MAC-based rule, l3v4 (2) - for IPv4-based rule, l3v4Ext (3) - for IPv4-Ext rule, l3v6 (4) - for IPv6-based rule. Note that only l2, l3 and l3v6 could be set by user, other is reserved for system to show information. Enumeration: 'expert': 6, 'l3v4': 2, 'l3v6': 4, 'l3v6Ext': 5, 'l2': 1, 'l3v4Ext': 3.
aclProfileRuleCount	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.4	integer32	read-only	The number of rules in this profile.
aclProfileRemark	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.5	snmpadminstring	read-write	acl group description which is long and more detailed.
aclProfileRuleIdStart	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.6	integer	read-write	the start rule id in this acl group.
aclProfileRuleIdStep	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.7	integer	read-write	the step of the rule id in this acl group.
aclProfileRuleCounterState	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.8	integer	read-write	the state of hw counter for this acl group. Enumeration: 'disabled': 2, 'enabled': 1.
aclProfileRuleCounterClear	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.9	integer	read-write	Clear rule hw counter for this acl group. Enumeration: 'disabled': 2, 'enabled': 1.
aclProfileStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.1.1.1.10	rowstatus	read-write	This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of aclProfileType, aclProfileMask and ProtocolType are not conflicted.
aclL2Rule	1.3.6.1.4.1.171.10.139.2.1.7.1.2
aclL2RuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1		no-access	A table to configure L2 filter rules in the system.
aclL2RuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1		no-access	Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number and Profile ID.
aclL2ProfileID	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.1	integer32	read-only	ACL Profile ID which this rule join.
aclL2AccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.2	integer32	read-only	L2 Filter rule ID.
aclL2RuleEtherType	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.3	integer32	read-write	The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0', which means the rule don't care this condition. The aclL2EtherFrameType should be specified as ether-type.
aclL2RuleDstMacAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.4	macaddress	read-write	Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.
aclL2RuleSrcMacAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.5	macaddress	read-write	Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
aclL2RuleVlanId	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.6	integer32	read-write	Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.
aclL2Rule1pPriority	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.7	integer32	read-write	802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
aclL2RuleDstMacAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.8	macaddress	read-write	The MAC address Mask work for Destination MAC address.
aclL2RuleSrcMacAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.9	macaddress	read-write	The MAC address Mask work for Source MAC address.
aclL2RuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.10	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclL2RuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.11	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded. Enumeration: 'drop': 2, 'allow': 1.
aclL2RuleEtherTypeMask	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.12	integer32	read-write	The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition. The aclL2EtherFrameType should be specified as ether-type.
aclL2RuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.13	counter32	read-only	Number of times this filter is matched.
aclL2RuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.2.1.1.14	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclL3v4Rule	1.3.6.1.4.1.171.10.139.2.1.7.1.3
aclL3v4RuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1		no-access	A table to configure L3 filter rules in the system.
aclL3v4RuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1		no-access	Each entry in this table is a L3 filter rule. Index to the table is L3 filter number.
aclL3v4RuleProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.1	integer32	read-only	The Profile ID which this rule join.
aclL3v4RuleAccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.2	integer32	read-only	L3 Filter rule ID.
aclL3v4RuleDstIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.3	ipaddress	read-write	Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclL3v4RuleSrcIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.4	ipaddress	read-write	Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclL3v4RuleDstIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.5	ipaddress	read-write	The IP subnet mask for Destination IP address.
aclL3v4RuleSrcIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.6	ipaddress	read-write	The IP subnet mask for Source IP address.
aclL3v4RuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.7	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
aclL3v4RuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.8	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclL3v4RuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.9	counter32	read-only	Number of times this filter is matched.
aclL3v4RuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.3.1.1.10	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclL3v4ExtRule	1.3.6.1.4.1.171.10.139.2.1.7.1.4
aclL3v4ExtRuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1		no-access	A table to configure L3 filter rules in the system.
aclL3v4ExtRuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1		no-access	Each entry in this table is a L3 filter rule. Index to the table is L3 filter number.
aclL3v4ExtRuleProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.1	integer32	read-only	The Profile ID which this rule join.
aclL3v4ExtRuleAccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.2	integer32	read-only	L3 Filter rule ID.
aclL3v4ExtRuleProtocol	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.3	integer	read-write	The type of protocol to be checked against the packet. Enumeration: 'none': 0, 'pim': 103, 'vrrp': 112, 'esp': 50, 'pcp': 108, 'udp': 17, 'tcp': 6, 'eigrp': 88, 'gre': 47, 'ipinip': 94, 'icmp': 1, 'ospf': 89, 'igmp': 2.
aclL3v4ExtRuleFragments	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.4	integer	read-write	Enumeration: 'disabled': 2, 'none': 0, 'enabled': 1.
aclL3v4ExtRuleICMPMessageType	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.5	integer32	read-write	The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
aclL3v4ExtRuleICMPMessageCode	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.6	integer32	read-write	The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
aclL3v4ExtRuleDstIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.7	ipaddress	read-write	Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclL3v4ExtRuleSrcIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.8	ipaddress	read-write	Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclL3v4ExtRuleDstIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.9	ipaddress	read-write	The IP subnet mask for Destination IP address.
aclL3v4ExtRuleSrcIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.10	ipaddress	read-write	The IP subnet mask for Source IP address.
aclL3v4ExtRuleTcpUdpDstOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.11	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclL3v4ExtRuleTcpUdpDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.12	integer32	read-write	The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
aclL3v4ExtRuleTcpUdpMinDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.13	unsigned32	read-write	The minimum port in the destination port range.
aclL3v4ExtRuleTcpUdpMaxDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.14	unsigned32	read-write	The maximum port in the destination port range.
aclL3v4ExtRuleTcpUdpSrcOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.15	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclL3v4ExtRuleTcpUdpSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.16	integer32	read-write	The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
aclL3v4ExtRuleTcpUdpMinSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.17	unsigned32	read-write	The minimum port in the source port range.
aclL3v4ExtRuleTcpUdpMaxSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.18	unsigned32	read-write	The maximum port in the source port range.
aclL3v4ExtRuleIPPrecedence	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.19	integer32	read-only
aclL3v4ExtRuleDscp	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.20	integer32	read-only	The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The aclL3RuleTos should be specified as dscp.
aclL3v4ExtRuleToS	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.21	integer32	read-write	The ToS value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The cmAclL3RuleTos should be specified as dscp.
aclL3v4ExtRuleTcpAckBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.22	integer	read-only	The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleTcpRstBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.23	integer	read-only	The TCP RST bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleTcpUrgBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.24	integer	read-only	The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleTcpPshBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.25	integer	read-only	The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(3). which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleTcpSynBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.26	integer	read-only	The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleTcpFinBit	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.27	integer	read-only	The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v4ExtRuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.28	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
aclL3v4ExtRuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.29	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclL3v4ExtRuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.30	counter32	read-only	Number of times this filter is matched.
aclL3v4ExtRuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.4.1.1.31	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclL3v6Rule	1.3.6.1.4.1.171.10.139.2.1.7.1.5
aclL3v6RuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1		no-access	A table to configure L3 ipv6 filter rules in the system.
aclL3v6RuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1		no-access	Each entry in this table is a L3 ipv6 filter rule. Index to the table is L3 ipv6 filter number.
aclL3v6RuleProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.1	integer32	read-only	The Profile ID which this rule join.
aclL3v6RuleAccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.2	integer32	read-only	L3 Filter rule ID.
aclL3v6RuleDstIpv6Addr	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.3	ipv6address	read-write	Destination IPv6 address to be matched with the packet.
aclL3v6RuleSrcIpv6Addr	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.4	ipv6address	read-write	Source IPv6 address to be matched with the packet.
aclL3v6RuleDstIpv6AddrPrefixLen	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.5	inetaddressprefixlength	read-write	The prefix length for Destination IPv6 address.
aclL3v6RuleSrcIpv6AddrPrefixLen	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.6	inetaddressprefixlength	read-write	The prefix length for Source IPv6 address.
aclL3v6RuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.7	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
aclL3v6RuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.8	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclL3v6RuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.9	counter32	read-only	Number of times this filter is matched.
aclL3v6RuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.5.1.1.10	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclL3v6ExtRule	1.3.6.1.4.1.171.10.139.2.1.7.1.6
aclL3v6ExtRuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1		no-access	A table to configure L3 ipv6 filter rules in the system.
aclL3v6ExtRuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1		no-access	Each entry in this table is a L3 ipv6 filter rule. Index to the table is L3 ipv6 filter number.
aclL3v6ExtRuleProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.1	integer32	read-only	The Profile ID which this rule join.
aclL3v6ExtRuleAccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.2	integer32	read-only	L3 Filter rule ID.
aclL3v6ExtRuleDscp	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.3	integer32	read-write	The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
aclL3v6ExtRuleProtocol	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.4	integer	read-write	The type of protocol to be checked against the packet.
aclL3v6ExtRuleFragments	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.5	integer	read-write	Enumeration: 'disabled': 2, 'none': 0, 'enabled': 1.
aclL3v6ExtRuleTcpUdpDstOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.6	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclL3v6ExtRuleTcpUdpDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.7	integer32	read-write	The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
aclL3v6ExtRuleTcpUdpMinDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.8	unsigned32	read-write	The minimum port in the destination port range.
aclL3v6ExtRuleTcpUdpMaxDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.9	unsigned32	read-write	The maximum port in the destination port range.
aclL3v6ExtRuleTcpUdpSrcOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.10	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclL3v6ExtRuleTcpUdpSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.11	integer32	read-write	The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
aclL3v6ExtRuleTcpUdpMinSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.12	unsigned32	read-write	The minimum port in the source port range.
aclL3v6ExtRuleTcpUdpMaxSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.13	unsigned32	read-write	The maximum port in the source port range.
aclL3v6ExtRuleICMPv6MessageType	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.14	integer32	read-write	The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
aclL3v6ExtRuleICMPv6MessageCode	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.15	integer32	read-write	The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
aclL3v6ExtRuleDstIpv6Addr	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.16	ipv6address	read-write	Destination IPv6 address to be matched with the packet.
aclL3v6ExtRuleSrcIpv6Addr	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.17	ipv6address	read-write	Source IPv6 address to be matched with the packet.
aclL3v6ExtRuleDstIpv6AddrPrefixLen	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.18	inetaddressprefixlength	read-write	The prefix length for Destination IPv6 address.
aclL3v6ExtRuleSrcIpv6AddrPrefixLen	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.19	inetaddressprefixlength	read-write	The prefix length for Source IPv6 address.
aclL3v6ExtRuleTcpAckBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.20	integer	read-only	The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleTcpRstBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.21	integer	read-only	The TCP RST bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleTcpUrgBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.22	integer	read-only	The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleTcpPshBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.23	integer	read-only	The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(3). which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleTcpSynBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.24	integer	read-only	The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleTcpFinBit	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.25	integer	read-only	The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclL3v6ExtRuleFlowLabel	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.26	integer32	read-write	The flow identifier in an IPv6 header.
aclL3v6ExtRuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.27	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
aclL3v6ExtRuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.28	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclL3v6ExtRuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.29	counter32	read-only	Number of times this filter is matched.
aclL3v6ExtRuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.6.1.1.30	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclExpertExtRule	1.3.6.1.4.1.171.10.139.2.1.7.1.7
aclExpertExtRuleTable	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1		no-access	A table to configure L3 filter rules in the system.
aclExpertExtRuleEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1		no-access	Each entry in this table is a L3 filter rule. Index to the table is L3 filter number.
aclExpertExtRuleProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.1	integer32	read-only	The Profile ID which this rule join.
aclExpertExtRuleAccessID	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.2	integer32	read-only	L3 Filter rule ID.
aclExpertExtRuleProtocol	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.3	integer	read-write	The type of protocol to be checked against the packet. Enumeration: 'none': 0, 'pim': 103, 'vrrp': 112, 'esp': 50, 'pcp': 108, 'udp': 17, 'tcp': 6, 'eigrp': 88, 'gre': 47, 'ipinip': 94, 'icmp': 1, 'ospf': 89, 'igmp': 2.
aclExpertExtRuleFragments	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.4	integer	read-write	Enumeration: 'disabled': 2, 'none': 0, 'enabled': 1.
aclExpertExtRuleICMPMessageType	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.5	integer32	read-write	The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
aclExpertExtRuleICMPMessageCode	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.6	integer32	read-write	The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
aclExpertExtRuleDstIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.7	ipaddress	read-write	Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclExpertExtRuleSrcIpAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.8	ipaddress	read-write	Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
aclExpertExtRuleDstIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.9	ipaddress	read-write	The IP subnet mask for Destination IP address.
aclExpertExtRuleSrcIpAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.10	ipaddress	read-write	The IP subnet mask for Source IP address.
aclExpertExtRuleTcpUdpDstOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.11	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclExpertExtRuleTcpUdpDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.12	integer32	read-write	The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
aclExpertExtRuleTcpUdpMinDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.13	integer	read-write	The minimum port in the destination port range.
aclExpertExtRuleTcpUdpMaxDstPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.14	integer	read-write	The maximum port in the destination port range.
aclExpertExtRuleTcpUdpSrcOperator	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.15	integer	read-write	The type of UDP/TCP port operator indicates how a packet's TCP/UDP source or destination port number is compared. none(1) - No comparison. eq (2)- equal gt (3)- greater than. lt (4)- less than. neq(5)- not equal range(6)- compares the port value between two numbers. Enumeration: 'none': 1, 'gt': 3, 'lt': 4, 'range': 6, 'eq': 2, 'neq': 5.
aclExpertExtRuleTcpUdpSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.16	integer32	read-write	The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
aclExpertExtRuleTcpUdpMinSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.17	integer	read-write	The minimum port in the source port range.
aclExpertExtRuleTcpUdpMaxSrcPort	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.18	integer	read-write	The maximum port in the source port range.
aclExpertExtRuleIPPrecedence	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.19	integer32	read-only
aclExpertExtRuleDscp	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.20	integer32	read-only	The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The aclL3RuleTos should be specified as dscp.
aclExpertExtRuleToS	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.21	integer32	read-write	The ToS value to be checked against the packet. A default value is '-1', which means the rule don't care this condition. The cmAclL3RuleTos should be specified as dscp.
aclExpertExtRuleTcpAckBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.22	integer	read-only	The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleTcpRstBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.23	integer	read-only	The TCP RST bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleTcpUrgBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.24	integer	read-only	The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleTcpPshBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.25	integer	read-only	The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(3). which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleTcpSynBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.26	integer	read-only	The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleTcpFinBit	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.27	integer	read-only	The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(3), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dont_care': 3.
aclExpertExtRuleDstMacAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.28	macaddress	read-write	Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.
aclExpertExtRuleSrcMacAddr	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.29	macaddress	read-write	Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
aclExpertExtRuleVlanId	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.30	integer32	read-write	Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.
aclExpertExtRule1pPriority	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.31	integer32	read-write	802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
aclExpertExtRuleDstMacAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.32	macaddress	read-write	The MAC address Mask work for Destination MAC address.
aclExpertExtRuleSrcMacAddrMask	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.33	macaddress	read-write	The MAC address Mask work for Source MAC address.
aclExpertExtRuleAction	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.34	integer	read-write	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
aclExpertExtRuleTimeRange	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.35	snmpadminstring	read-write	An administratively assigned string, which may be used to identify the Profile.
aclExpertExtRuleMatchCount	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.36	counter32	read-only	Number of times this filter is matched.
aclExpertExtRuleStatus	1.3.6.1.4.1.171.10.139.2.1.7.1.7.1.1.37	rowstatus	read-write	This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
aclPortBindGroup	1.3.6.1.4.1.171.10.139.2.1.7.1.8
aclPortGroupTable	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1		no-access	A table to control the port group binding information of L2 Group, L3v4 Group, and L3v6 Group
aclPortGroupEntry	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1		no-access	An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
aclPortIndex	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.1	integer32	read-only	Interface index of the port for the configuration in this entry applies.
aclPortDirection	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.2	integer	read-only	Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'in': 1.
aclPortL2ProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.3	integer32	read-write	The L2 Profile ID which this port bind. zero means not configured.
aclPortL3v4StdProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.4	integer32	read-write	The L3v4 Profile ID which this port bind. zero means not configured.
aclPortL3v4ExtProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.5	integer32	read-write	The L3v4 Profile ID which this port bind. zero means not configured.
aclPortL3v6StdProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.6	integer32	read-write	The L3v6 Profile ID which this port bind. zero means not configured.
aclPortL3v6ExtProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.7	integer32	read-write	The L3v6 Profile ID which this port bind. zero means not configured.
aclPortExpertProfileNo	1.3.6.1.4.1.171.10.139.2.1.7.1.8.1.1.8	integer32	read-write	The L3v6 Profile ID which this port bind. zero means not configured.
dlinkSecurity	1.3.6.1.4.1.171.10.139.2.1.8
securityportSecurityGroup	1.3.6.1.4.1.171.10.139.2.1.8.1
portSecurityGlobalSettings	1.3.6.1.4.1.171.10.139.2.1.8.1.1
portSecurityTrapState	1.3.6.1.4.1.171.10.139.2.1.8.1.1.1	bits	read-write	This Object is used to enbale or disable the transmission of trap notification messages. A vector of Boolean notification types, used to enable or disable the client notification types: PortSecExceedMLA(0) When the bit 'PortSecExceedMLA(0)' is set, a trap will be send out when learnt mac entries exceed the Max learning number for the specific port . Bits: 'portSecExceedMLA': 0.
portSecurityTrapRate	1.3.6.1.4.1.171.10.139.2.1.8.1.1.2	integer32	read-write	Port Security Trap Rate Settings. Trap Rate (0-1000)
portSecuritySysMaxAddr	1.3.6.1.4.1.171.10.139.2.1.8.1.1.3	integer32	read-write	Port Security System Settings. Trap Rate System Maximum Address (1-6656)
portSecurityPortSettings	1.3.6.1.4.1.171.10.139.2.1.8.1.2
portSecurityTable	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1		no-access	Port Security Port Settings table.
portSecurityEntry	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1		no-access	The Port Security Port Settings entry.
portSecurityPort	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.1	integer32	read-write	This object indicates the port index.
portSecurityState	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.2	integer	read-write	This object indicates the Port Security Port Settings state. Enumeration: 'disabled': 2, 'enabled': 1.
portSecuritySysMax	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.3	integer32	read-write	Port Security Port Settings. Maximum (1-6656)
portSecurityVioAction	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.4	integer	read-write	Port Security Port Settings. Violation Action Enumeration: 'restrict': 2, 'protect': 1, 'shutdown': 3.
portSecuritySecurMode	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.5	integer	read-write	Port Security Port Settings. Security Mode permanent(1) - Under this mode all learned MAC addresses won't be purged unless a user deletes these entries manually. deleteOnTimeout(2) - Under this mode all learned MAC addresses will be purged when an entry ages out or a user deletes these entries manually. Enumeration: 'permanent': 3, 'deleteOnTimeout': 2.
portSecurityAgingTime	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.6	integer32	read-write	Port Security Port Settings. Aging Time (0-1440)
portSecurityAgingType	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.7	integer	read-write	Port Security Port Settings. Aging Type. Enumeration: 'inactivity': 2, 'absolute': 1.
portSecurityCurrentNo	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.8	integer32	read-only	Port Security Port Settings. Current No.
portSecurityVioCount	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.9	integer32	read-only	Port Security Port Settings. Violation Count.
portSecurityCurState	1.3.6.1.4.1.171.10.139.2.1.8.1.2.1.1.10	integer	read-only	Port Security Port Settings. Current State. Enumeration: 'forwarding': 1, 'other': 0, 'err-disabled': 2.
portSecurityAddressEntries	1.3.6.1.4.1.171.10.139.2.1.8.1.3
portSecAddrTable	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1		no-access	Port Security Address Entries table.
portSecAddrEntry	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1		no-access	Port Security Address Entries entry.
portSecAddrVID	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.1	unsigned32	read-only	Port Security Address Entries . VID.
portSecAddrMAC	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.2	macaddress	read-only	Port Security Address Entries. MAC Address
portSecAddrPort	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.3	integer32	read-write	This object indicates the port index.
portSecAddrType	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.4	integer	read-only	This object indicates the secure mode. For manually configured secure MAC addresses, the portSecAddrType is permanent. Enumeration: 'permanent': 3, 'deleteOnTimeout': 2.
portSecAddrRowStatus	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.5	rowstatus	read-only	This object indicates the port security mac table entry RowStatus.
portSecAddrRemainTime	1.3.6.1.4.1.171.10.139.2.1.8.1.3.1.1.6	integer32	read-only	Port Security Address Entries. Remaining Time (mins).
portSecurityTraps	1.3.6.1.4.1.171.10.139.2.1.8.1.4
portSecurityTrapList	1.3.6.1.4.1.171.10.139.2.1.8.1.4.0
portSecurityViolation	1.3.6.1.4.1.171.10.139.2.1.8.1.4.0.1			This is a trap that will send to snmp manager,and it will be generated when the learnt mac entries num exceed the MLA of the specific port when port security is enable for this port .
securityDhcpSerScrGroup	1.3.6.1.4.1.171.10.139.2.1.8.7
dhcpSerScrGlobSettings	1.3.6.1.4.1.171.10.139.2.1.8.7.1
dhcpSerScrGlobTrapState	1.3.6.1.4.1.171.10.139.2.1.8.7.1.1	integer	read-write	DHCP Server Screening Global Settings. Trap State. Enumeration: 'disabled': 2, 'enabled': 1.
dhcpSerScrLogBufEntries	1.3.6.1.4.1.171.10.139.2.1.8.7.1.2	integer	read-write	DHCP Server Screening Global Settings. Log Buffer Entries.
dhcpSerScrLogClear	1.3.6.1.4.1.171.10.139.2.1.8.7.1.3	truthvalue	read-write	Clears the buffered logs. This object is set to 'false' by default. When set to 'True', the buffered logs will be cleared and the value of this object will become 'false' again.
dhcpSerScrProfileTable	1.3.6.1.4.1.171.10.139.2.1.8.7.1.4		no-access	A table to configure dhcp server screen profile information.
dhcpSerScrProfileEntry	1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1		no-access	A list of entries to configure dhcp server screen profile information.
dhcpSerScrProfileName	1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.1	displaystring	read-only	The DSS Profile name.
dhcpSerScrProfileClientMac	1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.2	macaddress	read-only	The DSS Profile Client MAC.
dhcpSerScrProfileRowStatus	1.3.6.1.4.1.171.10.139.2.1.8.7.1.4.1.3	rowstatus	read-only	The row status of an entry in the dhcp server screen profile Table.
dhcpSerScrLogTable	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5		no-access	Log Entries in the table are automatically created when dhcp server screen violation occurence.
dhcpSerScrLogEntry	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1		no-access	An entry in the dhcpSerScrLogTable. Entries are automatically created whenever dhcp server screen violation occurence.
dhcpSerScrLogIndex	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.1	unsigned32	read-only	Dhcp server screening log entry index.
dhcpSerScrLogVlanID	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.2	integer	read-only	dhcp server screening log vlan id infomation.
dhcpSerScrLogIPAddr	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.3	inetaddress	read-only	dhcp server screening log ip infomation.
dhcpSerScrLogMacAddr	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.4	macaddress	read-only	dhcp server screening log mac address infomation.
dhcpSerScrLogOccurrence	1.3.6.1.4.1.171.10.139.2.1.8.7.1.5.1.5	displaystring	read-only	dhcp server screening log occurrence infomation.
dhcpSerScrPortSettings	1.3.6.1.4.1.171.10.139.2.1.8.7.2
dhcpSerScrPortTable	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1		no-access	The table of DHCP Server Screening Port Settings.
dhcpSerScrPortEntry	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1		no-access	The list of DHCP Server Screening Port Settings entry.
dhcpSerScrPortIndex	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.1	integer32	read-only	DHCP Server Screening Port Settings . Port.
dhcpSerScrPortState	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.2	integer	read-write	DHCP Server Screening Port Settings. State. Enumeration: 'disabled': 2, 'enabled': 1.
dhcpSerScrPortServerAddrType	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.3	inetaddresstype	read-write	DHCP Server Screening IP Type: IPv4/IPv6.
dhcpSerScrPortServerIP	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.4	inetaddress	read-write	DHCP Server Screening Port Settings. Server IP.
dhcpSerScrPortProfileName	1.3.6.1.4.1.171.10.139.2.1.8.7.2.1.1.5	displaystring	read-write	DHCP Server Screening Port Settings. Profile Name.
dhcpSerScrTraps	1.3.6.1.4.1.171.10.139.2.1.8.7.3
dhcpSerScrTrapList	1.3.6.1.4.1.171.10.139.2.1.8.7.3.0
dhcpSerScrAttackDetect	1.3.6.1.4.1.171.10.139.2.1.8.7.3.0.1			This is a trap that will send to snmp manager,and it will be generated when the forge dhcp server packets received when dhcp server screening is enable for this port.
securitySafeGuardGroup	1.3.6.1.4.1.171.10.139.2.1.8.13
safeGuardEnable	1.3.6.1.4.1.171.10.139.2.1.8.13.1	integer	read-write	This object is used to set Safeguard Enable/Disable. Enumeration: 'enable': 1, 'disable': 2.
securityTrustedHostGroup	1.3.6.1.4.1.171.10.139.2.1.8.14
trustedHostTable	1.3.6.1.4.1.171.10.139.2.1.8.14.1		no-access	A table to configure trusted host in the system.
trustedHostEntry	1.3.6.1.4.1.171.10.139.2.1.8.14.1.1		no-access	Each entry in this table represents rules for particular trusted host.
trustedHostType	1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.1	integer	read-only	Type of trusted host. Enumeration: 'http': 3, 'ping': 2, 'https': 4, 'telnet': 1.
trustedHostACLName	1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.2	displaystring	read-only	ACL access list name.
trustedHostRowStatus	1.3.6.1.4.1.171.10.139.2.1.8.14.1.1.3	rowstatus	read-only	The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
securityTrafficSegmentationGroup	1.3.6.1.4.1.171.10.139.2.1.8.15
trafficSegmentationTable	1.3.6.1.4.1.171.10.139.2.1.8.15.1		no-access	A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel
trafficSegmentationEntry	1.3.6.1.4.1.171.10.139.2.1.8.15.1.1		no-access	There is one entry in this table for each created port-channel port
trafficSegmentationIfIndex	1.3.6.1.4.1.171.10.139.2.1.8.15.1.1.1	interfaceindex	read-only	The ifIndex of the port-channel(Aggregator's interface index).
trafficSegmentationMemberList	1.3.6.1.4.1.171.10.139.2.1.8.15.1.1.2	portlist	read-write	Port list of port channel.
securityStormCtrlGroup	1.3.6.1.4.1.171.10.139.2.1.8.16
stormCtrlMIBObjects	1.3.6.1.4.1.171.10.139.2.1.8.16.1
stormCtrlGentrl	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1
stormCtrlNotifyEnable	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.1	integer	read-write	This object controls when a storm control notification will be generated. If the object is set to none(0): No notifications will be generated. stormOccurred(1): A notification will be generated when a storm event is detected. stormCleared(2): A notification will be generated when a storm event is cleared. both (3): A notification will be generated both when a storm event is detected and cleared. NOTE:The default value of this object is none(0). Enumeration: 'stormCleared': 2, 'none': 0, 'both': 3, 'stormOccurred': 1.
stormCtrlPollingInterval	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.2	integer32	read-write	The interval, in seconds, the switch detects the storm.
stormCtrlPollingRetries	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.3	integer32	read-write	Specify the retry count. If the action is configured as 'shutdown' mode and storm keep as long as interval * retries, the port will enters error-disabled state. The effective range is from 1 to 360. 0 means that a 'shutdown' mode port will directly enter error-disabled state when storm is detected. -1 means that a 'shutdown' mode port will never enter error-disabled state even if storm is detected.
stormCtrlTable	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4		no-access	The traffic control table.
stormCtrlEntry	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1		no-access	The traffic control entry.
stormCtrlIndex	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.1	integer32	read-only	The traffic control index.
stormCtrlActionMode	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.2	integer	read-write	The action mode of traffic control. Enumeration: 'none': 0, 'drop': 1, 'shutdown': 2.
stormCtrlLevelType	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.4.1.3	integer	read-write	The Traffic control level type: pps or kbps. Enumeration: 'pps': 1, 'kbps': 2.
stormCtrlThresholdTable	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5		no-access	The traffic control table.
stormCtrlThresholdEntry	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1		no-access	The traffic control entry.
stormCtrlThresholdIndex	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.1	integer32	read-only	The traffic control index.
stormCtrlThresholdType	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.2	integer	read-only	The control type of traffic control. Enumeration: 'broadcast': 1, 'unicast': 3, 'multicast': 2.
stormCtrlThresholdRiseThre	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.3	integer32	read-write	The rise threshold of traffic control.
stormCtrlThresholdLowThre	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.4	integer32	read-write	The low threshold of traffic control.
stormCtrlThresholdCurrRate	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.5	integer32	read-only	The current rate of traffic control.
stormCtrlThresholdStormState	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.5.1.6	integer	read-only	This object indicates the current status of storm control on a given interface for a given traffic type. Enumeration: 'inactive': 5, 'forwarding': 1, 'linkDown': 4, 'dropped': 2, 'errorDisabled': 3.
stormCtrlTraps	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.6
stormCtrlTrapsList	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.6.0
stormCtrlTrapsStormOccur	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.6.0.1			This is a trap that will send to snmp manager,and it will be generated when storm is occured.
stormCtrlTrapsStormClear	1.3.6.1.4.1.171.10.139.2.1.8.16.1.1.6.0.2			This is a trap that will send to snmp manager,and it will be generated when port is cleared.
securityDoSprevGroup	1.3.6.1.4.1.171.10.139.2.1.8.17
doSCtrlTable	1.3.6.1.4.1.171.10.139.2.1.8.17.1		no-access	A table that holds the DoS prevention settings of the device.
doSCtrlEntry	1.3.6.1.4.1.171.10.139.2.1.8.17.1.1		no-access	A list of DoS prevention settings of the device.
doSCtrlType	1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.1	integer	read-only	This object indicates the DoS prevention type. Enumeration: 'tcp-synfin': 5, 'ping-of-death-attack': 7, 'tcp-syn-srcport-less-1024': 6, 'tcp-xmascan': 4, 'blat-attack': 2, 'land-attack': 1, 'tcp-null-scan': 3, 'tcp-tiny-fragment-attack': 8.
doSCtrlState	1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.2	integer	read-write	This object indicates the status of the DoS prevention type. Enumeration: 'enable': 1, 'disable': 2.
doSCtrlActionType	1.3.6.1.4.1.171.10.139.2.1.8.17.1.1.3	integer	read-write	This object indicates the action for the DoS prevention type. If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration will not take effect until a valid mirror port is specified. If mirror port is not valid the behavior will be the same as 'drop' Enumeration: 'drop': 1.
securitySSLGroup	1.3.6.1.4.1.171.10.139.2.1.8.19
sslObjects	1.3.6.1.4.1.171.10.139.2.1.8.19.1
sslServerStatus	1.3.6.1.4.1.171.10.139.2.1.8.19.1.1	integer	read-write	This object is for enabling or disabling secure HTTP in the system. Enumeration: 'enable': 1, 'disable': 2.
servicePolicyName	1.3.6.1.4.1.171.10.139.2.1.8.19.1.2	displaystring	read-write	Indicates the name of the policy for SSL application. This node is volatile; that is, it is lost if the SNMP agent is rebooted.
sslConfiguration	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4
sslServicePolicyTable	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3		no-access	A table controlls the parameters of SSL service policies.
sslServicePolicyEntry	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1		no-access	The row in the dSslServicePolicyTable containing the parameters of a SSL service policy. An entry is created/removed when a name for a specific policy is generated or deleted via CLI or by issuing appropriate sets to this table using snmp.
sslServicePolicyName	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.1	displaystring	read-only	Indicates the name of the policy for which this entry pertains to.
sslServicePolicyCipherSuites	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.2	bits	read-write	This object is to configure the cipher-suites list. This field is a bit mask, setting a bit indicates that the corresponding cipher-list will be involved in the server authentication. In the FIPS (American Security Standard Mode) Mode, Only the following cipher list should be supported. TLS_RSA_3DES_SHA1 TLS_ DHE_RSA_3DES_SHA1 TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA TLS_DHE_RSA_WITH_AES_128_CBC_SHA TLS_DHE_RSA_WITH_AES_256_CBC_SHA hence the default value in FIPS mode will be TLS_RSA_3DES_SHA1 \| TLS_ DHE_RSA_3DES_SHA1 \| TLS_RSA_WITH_AES_128_CBC_SHA \| TLS_RSA_WITH_AES_256_CBC_SHA \| TLS_DHE_RSA_WITH_AES_128_CBC_SHA \| TLS_DHE_RSA_WITH_AES_256_CBC_SHA Bits: 'dhe-rsa-with-aes-256-cbc-sha': 10, 'dhe-rsa-with-aes-128-cbc-sha': 9, 'rsa-null-md5': 0, 'dh-rsa-3des-sha': 5, 'rsa-3des-sha': 3, 'dh-rsa-des-sha': 4, 'rsa-des-sha': 2, 'rsa-with-aes-256-cbc-sha': 8, 'rsa-exp1024-des-sha': 6, 'rsa-with-aes-128-cbc-sha': 7, 'rsa-null-sha': 1.
sslServicePolicyCacheTimeout	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.4	unsigned32	read-only	This object indicates the Cache Timeout value in the policy for SSL module to refresh the session resume data kept in database.
sslServicePolicyRowStatus	1.3.6.1.4.1.171.10.139.2.1.8.19.1.4.3.1.5	rowstatus	read-only	Status of this policy.
dlinkOAM	1.3.6.1.4.1.171.10.139.2.1.9
oamCableDiagGroup	1.3.6.1.4.1.171.10.139.2.1.9.1
cableDiagTriggerIndex	1.3.6.1.4.1.171.10.139.2.1.9.1.1	integer32	read-write	Trigger an interface index to do virtual cable test.
cableDiagTestPairTable	1.3.6.1.4.1.171.10.139.2.1.9.1.2		no-access	A table to get pair state and pair len.
cableDiagTestPairEntry	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1		no-access	An entry appears in this table for each interface Test in the system.
cableDiagTestPortPair	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.1	integer32	read-only	Record the cable diagnostic Test Port.
cableDiagTestResultPair1	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.2	integer	read-only	virtual cable test pair1 test result. Enumeration: 'crosstalk': 4, 'open': 1, 'notAvailable': 5, 'short': 2, 'ok': 0.
cableDiagTestResultPair2	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.3	integer	read-only	virtual cable test pair2 test result. Enumeration: 'crosstalk': 4, 'open': 1, 'notAvailable': 5, 'short': 2, 'ok': 0.
cableDiagTestResultPair3	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.4	integer	read-only	virtual cable test pair3 test result. Enumeration: 'crosstalk': 4, 'open': 1, 'notAvailable': 5, 'short': 2, 'ok': 0.
cableDiagTestResultPair4	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.5	integer	read-only	virtual cable test pair4 test result. Enumeration: 'crosstalk': 4, 'open': 1, 'notAvailable': 5, 'short': 2, 'ok': 0.
cableDiagTestLenPair1	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.6	integer32	read-only	virtual cable test pair1 fault distance.
cableDiagTestLenPair2	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.7	integer32	read-only	virtual cable test pair2 fault distance.
cableDiagTestLenPair3	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.8	integer32	read-only	virtual cable test pair3 fault distance.
cableDiagTestLenPair4	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.9	integer32	read-only	virtual cable test pair4 fault distance.
cableDiagTestLenPairClear	1.3.6.1.4.1.171.10.139.2.1.9.1.2.1.10	integer32	read-write	Clear virtual cable test results.
dlinkMonitoring	1.3.6.1.4.1.171.10.139.2.1.10
monStatisticsGroup	1.3.6.1.4.1.171.10.139.2.1.10.2
statisticsCounters	1.3.6.1.4.1.171.10.139.2.1.10.2.1
statisticsCountersTable	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1		no-access	A list of interface entries. The number of entries is given by the value of ifNumber.
statisticsCountersEntry	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1		no-access	An entry containing management information applicable to a particular interface.
statPort	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.1	interfaceindex	read-only
statPortRxRateBytes	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.2	counter32	read-only	Port RX Rate bytes/sec.
statPortRxRatePackets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.3	counter32	read-only	Port RX Rate Packets/sec.
statPortRxTotalBytes	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.4	counter64	read-only	Port Rx Total Bytes/sec.
statPortRxTotalPackets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.5	counter64	read-only	Port Rx Total Packets/sec.
statPortTxRateBytes	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.6	counter32	read-only	Port Tx Rate Bytes/sec.
statPortTxRatePackets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.7	counter32	read-only	Port Tx Rate Packets/sec.
statPortTxTotalBytes	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.8	counter64	read-only	Port Tx Total Bytes/sec.
statPortTxTotalPackets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.9	counter64	read-only	Port Tx Total Packets.
statPortRxMulticast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.10	counter64	read-only	Port Rx multicast Packets.
statPortRxUnicast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.11	counter64	read-only	Port Rx unicast Packets.
statPortRxBroadcast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.12	counter64	read-only	Port Rx broadcast Packets.
statPortTxMulticast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.13	counter64	read-only	Port Tx multicast Packets.
statPortTxUnicast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.14	counter64	read-only	Port Tx unicast Packets.
statPortTxBroadcast	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.15	counter64	read-only	Port Tx broadcast Packets.
statCountersrxHCPkt64Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.16	counter64	read-only	.
statCountersrxHCPkt65to127Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.17	counter64	read-only	.
statCountersrxHCPkt128to255Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.18	counter64	read-only	.
statCountersrxHCPkt256to511Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.19	counter64	read-only	.
statCountersrxHCPkt512to1023Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.20	counter64	read-only	.
statCountersrxHCPkt1024to1518Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.21	counter64	read-only	.
statCountersrxHCPkt1519to2047Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.22	counter64	read-only	.
statCountersrxHCPkt2048to4095Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.23	counter64	read-only	.
statCountersrxHCPkt4096to9216Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.24	counter64	read-only	.
statCounterstxHCPkt64Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.25	counter64	read-only	.
statCounterstxHCPkt65to127Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.26	counter64	read-only	.
statCounterstxHCPkt128to255Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.27	counter64	read-only	.
statCounterstxHCPkt256to511Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.28	counter64	read-only	.
statCounterstxHCPkt512to1023Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.29	counter64	read-only	.
statCounterstxHCPkt1024to1518Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.30	counter64	read-only	.
statCounterstxHCPkt1519to2047Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.31	counter64	read-only	.
statCounterstxHCPkt2048to4095Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.32	counter64	read-only	.
statCounterstxHCPkt4096to9216Octets	1.3.6.1.4.1.171.10.139.2.1.10.2.1.1.1.33	counter64	read-only	.
statisticsErrorCounters	1.3.6.1.4.1.171.10.139.2.1.10.2.2
statisticsErrorTable	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1		no-access	A list of interface entries. The number of entries is given by the value of ifNumber.
statisticsErrorEntry	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1		no-access	An entry containing management information applicable to a particular interface.
statPortCountPort	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.1	interfaceindex	read-only	A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
statCountersrxDroppkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.2	counter32	read-only	.
statCountersrxMTUDropPkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.3	counter32	read-only	.
statPortCountDeferredTx	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.4	counter32	read-only	A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statCountersdot3StatsSingleColFrames	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.5	counter32	read-only	.
statPortCountExcessCol	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.6	counter32	read-only	A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statPortCountLateCol	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.7	counter32	read-only	The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statPortCountAlignErr	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.8	counter32	read-only	.
statPortCountFCSErr	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.9	counter32	read-only	A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statCountersifOutDiscards	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.10	counter32	read-only	.
statPortCountMultiCol	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.11	counter32	read-only	.
statPortCountCarriSen	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.12	counter32	read-only	.
statPortCountSQETestErr	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.13	counter32	read-only	.
statCountersdot3StatsDeferredTransmisions	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.14	counter32	read-only	.
statPortCountIntMacTx	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.15	counter32	read-only	A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCollisions object, the dot3StatsExcessiveCollisions object, or the dot3StatsCarrierSenseErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of transmission errors on a particular interface that are not otherwise counted. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsInternalMacTransmitErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statPortCountIntMacRx	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.16	counter32	read-only	A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsInternalMacReceiveErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
statCountersrxCRCAlignErrors	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.17	counter32	read-only	.
statCountersrxUndersizedPkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.18	counter32	read-only	.
statCountersrxOversizedPkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.19	counter32	read-only	.
statCountersrxFragmentPkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.20	counter32	read-only	.
statCountersrxJabbers	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.21	counter32	read-only	.
statCountersrxSymbolErrors	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.22	counter32	read-only	.
statCountersrxMulticastDropPkts	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.23	counter32	read-only	.
statCountersifInErrors	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.24	counter32	read-only	.
statCountersifOutErrors	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.25	counter32	read-only	.
statCountersifInDiscards	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.26	counter32	read-only	.
statCountersifInUnknownProtos	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.27	counter32	read-only	.
statCounterstxDelayExceededDiscards	1.3.6.1.4.1.171.10.139.2.1.10.2.2.1.1.28	counter32	read-only	.
statisticsClear	1.3.6.1.4.1.171.10.139.2.1.10.2.3
statisticsCounterClearTable	1.3.6.1.4.1.171.10.139.2.1.10.2.3.1		no-access	A list of interface entries. The number of entries is given by the value of ifNumber.
statisticsCounterClearEntry	1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1		no-access	An entry containing management information applicable to a particular interface.
statCounterClearIndex	1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.1	integer	read-only	A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
statCounterClearStatus	1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.2	integer	read-write	Enable or disable statCounter Counters Clear on read by port. Enumeration: 'disabled': 2, 'enabled': 1.
statCounterLinkChange	1.3.6.1.4.1.171.10.139.2.1.10.2.3.1.1.3	integer	read-only	Counter the linkchange times by port.
monMirrorGroup	1.3.6.1.4.1.171.10.139.2.1.10.3
mirrorSessionTable	1.3.6.1.4.1.171.10.139.2.1.10.3.1		no-access	A table to Session Table.
mirrorSessionEntry	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1		no-access	An entry appears in Session Table.
mirrorSessionNumber	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.1	integer32	read-only	Specifies the port to which the mirrored traffic in the system is to be copied.
mirrorDestinationPort	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.2	integer32	read-write	Mirror Settings. Destination port.
mirrorSourceIngressPort	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.3	portlist	read-write	This object indicates the port index.
mirrorSourceEgressPort	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.4	portlist	read-write	This object indicates the port index.
mirrorSessionRowStatus	1.3.6.1.4.1.171.10.139.2.1.10.3.1.1.5	rowstatus	read-write	Specifies the validity of the entry, max entry number is 4.
dlinkGreen	1.3.6.1.4.1.171.10.139.2.1.11
dlinkPowersavingGroup	1.3.6.1.4.1.171.10.139.2.1.11.1
powerSavingGlobalSettings	1.3.6.1.4.1.171.10.139.2.1.11.1.1
psgFunctionVersion	1.3.6.1.4.1.171.10.139.2.1.11.1.1.1	displaystring	read-only	Power Saving Global Settings Function Version.
psgScheduledPortShutdown	1.3.6.1.4.1.171.10.139.2.1.11.1.1.2	integer	read-write	Scheduled Port-shutdown Power Saving. Enumeration: 'disabled': 2, 'enabled': 1.
psgScheduledHibernation	1.3.6.1.4.1.171.10.139.2.1.11.1.1.3	integer	read-write	Scheduled Hibernation Power Saving. Enumeration: 'disabled': 2, 'enabled': 1.
psgScheduledDimLED	1.3.6.1.4.1.171.10.139.2.1.11.1.1.4	integer	read-write	Scheduled Dim-LED Power Saving. Enumeration: 'disabled': 2, 'enabled': 1.
psgAdministrativeDimLED	1.3.6.1.4.1.171.10.139.2.1.11.1.1.5	integer	read-write	Administrative Dim-LED. Enumeration: 'disabled': 2, 'enabled': 1.
powerSavingTimeRangeSettings	1.3.6.1.4.1.171.10.139.2.1.11.1.2
psgDimLEDShutOffTimeProfile	1.3.6.1.4.1.171.10.139.2.1.11.1.2.1	displaystring	read-write	The time profile name associated with the Schedule entry (e.g., `abc, bbb').
psgHibernationTimeProfile	1.3.6.1.4.1.171.10.139.2.1.11.1.2.2	displaystring	read-write	The time profile name associated with the Schedule entry (e.g., `abc, bbb').
powerSavingShutdownSettings	1.3.6.1.4.1.171.10.139.2.1.11.1.3
powerSavingShutdownTable	1.3.6.1.4.1.171.10.139.2.1.11.1.3.1		no-access	The table of Power Saving Shutdown.
powerSavingShutdownEntry	1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1		no-access	The list of Power Saving Shutdown entry.
psShutdownPort	1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1.1	integer32	read-only	SNMP Linkchange Trap Settings.
psShutdownTimeRange	1.3.6.1.4.1.171.10.139.2.1.11.1.3.1.1.2	displaystring	read-write	Time Range Settings Name.
dlinkEEEGroup	1.3.6.1.4.1.171.10.139.2.1.11.2
greenEeeTable	1.3.6.1.4.1.171.10.139.2.1.11.2.1		no-access	The port eee table.
greenEeeEntry	1.3.6.1.4.1.171.10.139.2.1.11.2.1.1		no-access	The port eee entry.
eeePort	1.3.6.1.4.1.171.10.139.2.1.11.2.1.1.1	integer32	read-only	This object indicates the port index.
eeestate	1.3.6.1.4.1.171.10.139.2.1.11.2.1.1.2	integer	read-write	This object indicates the port eee state. Enumeration: 'disabled': 2, 'enabled': 1.