DLGSRPRF-MIB: View SNMP OID List / Download MIB

VENDOR: DIALOGIC CORPORATION


 Home MIB: DLGSRPRF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, DLGC-GLOBAL-REG

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlgPiSram 1.3.6.1.4.1.3028.1.2.1
     dlgPsStatsEnableMask 1.3.6.1.4.1.3028.1.2.1.1 integer read-write
Statistics Collection Enable mask. This mask enables or disables all statistics defined in this MIB. 0 - Disables statistics collection. 1 - Enables statistics collection. 2 - Clear existing statistics (resets all stats to zero) Default value is 1 - statistics collection enabled
     dlgPsPollingInterval 1.3.6.1.4.1.3028.1.2.1.2 integer read-write
The Agent's polling interval in seconds. This is the length of time that the Agent will keeps stats within the Current Stats group. By default, this value is 3600 seconds (1 hour). At the end of each interval the statistics are reset to zero and the counters begin counting up again. The dlgPsElapsedTime variable provides an indication how long into the current interval the agent has been collecting statistics.
     dlgPsElapsedTime 1.3.6.1.4.1.3028.1.2.1.3 integer read-only
Number of Elapsed seconds since the start of the current polling interval.
     dlgPsCurrentStats 1.3.6.1.4.1.3028.1.2.1.4
         dlgPsCurrentInterrupts 1.3.6.1.4.1.3028.1.2.1.4.1 counter read-only
Number of hardware interrupts generated by Span or D4x based boards for the current interval.
         dlgPsCurrentDrvCommands 1.3.6.1.4.1.3028.1.2.1.4.2 counter read-only
Number of commands sent to the driver for the current interval.
         dlgPsCurrentFWCommands 1.3.6.1.4.1.3028.1.2.1.4.3 counter read-only
Number of commands sent to the Firmware for the current interval.
         dlgPsCurrentUnSolEvents 1.3.6.1.4.1.3028.1.2.1.4.4 counter read-only
Number of unsolicited events from the Firmware for the current interval.
         dlgPsCurrentBytesRead 1.3.6.1.4.1.3028.1.2.1.4.5 counter read-only
Number of bytes read from the Firmware during record for the current interval.
         dlgPsCurrentBytesWritten 1.3.6.1.4.1.3028.1.2.1.4.6 counter read-only
Number of bytes written to the Firmware during playback for the current interval.
         dlgPsCurrentLostMsgToFW 1.3.6.1.4.1.3028.1.2.1.4.7 counter read-only
Number of lost messages (commands) to the Firmware for the current interval. This value should always be zero. A non zero value typically indicates a Firmware or hardware failure.
         dlgPsCurrentLostMsgFromFW 1.3.6.1.4.1.3028.1.2.1.4.8 counter read-only
Number of lost messages (events) from the Firmware for the current interval. This value should typically be zero. A non zero value indicates the host cannot service all the messages being generated by the firmware.
         dlgPsCurrentFWErrorMsgs 1.3.6.1.4.1.3028.1.2.1.4.9 counter read-only
Number of error message packets generated by the Firmware for the current interval. This should typically be zero.
         dlgPsCurrentDrvErrorMsgs 1.3.6.1.4.1.3028.1.2.1.4.10 counter read-only
Number of error message packets generated by the Driver for the current interval. This should tpyically be zero.
     dlgPsTotalStats 1.3.6.1.4.1.3028.1.2.1.5
         dlgPsTotalInterrupts 1.3.6.1.4.1.3028.1.2.1.5.1 counter read-only
Total Number of hardware interrupts generated by the Span or D4x based boards.
         dlgPsTotalDrvCommands 1.3.6.1.4.1.3028.1.2.1.5.2 counter read-only
Total Number of commands sent to the driver.
         dlgPsTotalFWCommands 1.3.6.1.4.1.3028.1.2.1.5.3 counter read-only
Total Number of commands sent to the Firmware.
         dlgPsTotalUnSolEvents 1.3.6.1.4.1.3028.1.2.1.5.4 counter read-only
Total Number of unsolicited events from the Firmware.
         dlgPsTotalBytesRead 1.3.6.1.4.1.3028.1.2.1.5.5 counter read-only
Total Number of bytes Read from the Firmware during record.
         dlgPsTotalBytesWritten 1.3.6.1.4.1.3028.1.2.1.5.6 counter read-only
Total Number of bytes written to the Firmware during playback.
         dlgPsTotalLostMsgToFW 1.3.6.1.4.1.3028.1.2.1.5.7 counter read-only
Total Number of lost messages (commands) to the Firmware. This value should always be zero. A non zero value typically indicates a Firmware or Hardware failure.
         dlgPsTotalLostMsgFromFW 1.3.6.1.4.1.3028.1.2.1.5.8 counter read-only
Total Number of lost messages (events) from the Firmware. This value should typically be zero. A non zero value indicates the host cannot service all the messages being generated by the firmware.
         dlgPsTotalFWErrorMsgs 1.3.6.1.4.1.3028.1.2.1.5.9 counter read-only
Total Number of error message packets gernerated by the Firmware. This should typically be zero.
         dlgPsTotalDrvErrorMsgs 1.3.6.1.4.1.3028.1.2.1.5.10 counter read-only
Total Number of error message packets generated by the Driver. This should typically be zero.
     dlgPiSramMibRev 1.3.6.1.4.1.3028.1.2.1.6
         dlgPiSramMibRevMajor 1.3.6.1.4.1.3028.1.2.1.6.1 integer read-only
The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
         dlgPiSramMibRevMinor 1.3.6.1.4.1.3028.1.2.1.6.2 integer read-only
The Minor Revision level. A change in the minor revision level may represent some minor additional support. no changes to any pre-existing information has occurred.