DKT-FE-MIB: View SNMP OID List / Download MIB

VENDOR: DKT


 Home MIB: DKT-FE-MIB
Download as:   
SNMPv2-CONF, DKT-MIB, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 feMIB 1.3.6.1.4.1.27304.12
DKT Fast Ethernet MIB.
       feSwitchEngine 1.3.6.1.4.1.27304.12.1
           feATU 1.3.6.1.4.1.27304.12.1.1 octet string read-only
Dumps the Address Translation Unit (ATU) Switch table in semi colon format
           feUnicastDelete 1.3.6.1.4.1.27304.12.1.2 octet string read-write
Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table.
           feMulticastDelete 1.3.6.1.4.1.27304.12.1.3 ipaddress read-write
Removes a multicast IP address from the Address Translation Unit (ATU) Switch table.
           feIGMPSnooping 1.3.6.1.4.1.27304.12.1.4 integer read-write
Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port
           feVTU 1.3.6.1.4.1.27304.12.1.5 octet string read-only
Dumps the VLAN Table Unit (VTU) Switch table in semi colon format
           feVLANCreate 1.3.6.1.4.1.27304.12.1.6 octet string read-write
Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE
           feVLANDelete 1.3.6.1.4.1.27304.12.1.7 integer read-write
Deletes a VLAN, input parameter is VLAN VID: 0 - 4095
           feClearVTU 1.3.6.1.4.1.27304.12.1.8 integer read-write
Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table
           feDumpPIRLBuckets 1.3.6.1.4.1.27304.12.1.9 octet string read-only
Dumps a list of the active buckets.
           feDisablePIRLBucket 1.3.6.1.4.1.27304.12.1.10 integer read-write
Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11.
           feVLANProviderMode 1.3.6.1.4.1.27304.12.1.11 integer read-write
Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port.
       fePorts 1.3.6.1.4.1.27304.12.2
           feCPUPort 1.3.6.1.4.1.27304.12.2.1
               feCPUPortAutoNegotiation 1.3.6.1.4.1.27304.12.2.1.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feCPUPortSpeedMode 1.3.6.1.4.1.27304.12.2.1.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD
               feCPUPortLinkStatus 1.3.6.1.4.1.27304.12.2.1.3 integer read-only
Gets the Link status for the port
               feCPUPortFlowControl 1.3.6.1.4.1.27304.12.2.1.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feCPUPortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.1.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feCPUPortIPQoSPriority 1.3.6.1.4.1.27304.12.2.1.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feCPUPortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.1.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feCPUPortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.1.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feCPUPortQueuePriority 1.3.6.1.4.1.27304.12.2.1.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feCPUPortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.1.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feCPUPortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.1.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feCPUPortMap2PIRL 1.3.6.1.4.1.27304.12.2.1.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feCPUPortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.1.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feCPUPortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.1.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feCPUPortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.1.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feCPUPortDefaultVLAN 1.3.6.1.4.1.27304.12.2.1.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feCPUPortForceDefaultVID 1.3.6.1.4.1.27304.12.2.1.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feCPUPortVLANPortMode 1.3.6.1.4.1.27304.12.2.1.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feCPUPortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.1.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feCPUPortIGMPSnooping 1.3.6.1.4.1.27304.12.2.1.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feCPUPortAddUnicast 1.3.6.1.4.1.27304.12.2.1.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feCPUPortAddMulticast 1.3.6.1.4.1.27304.12.2.1.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
           feWANPort 1.3.6.1.4.1.27304.12.2.2
               feWANPortAutoNegotiation 1.3.6.1.4.1.27304.12.2.2.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feWANPortSpeedMode 1.3.6.1.4.1.27304.12.2.2.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
               feWANPortLinkStatus 1.3.6.1.4.1.27304.12.2.2.3 integer read-only
Gets the Link status for the port
               feWANPortFlowControl 1.3.6.1.4.1.27304.12.2.2.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feWANPortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.2.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feWANPortIPQoSPriority 1.3.6.1.4.1.27304.12.2.2.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feWANPortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.2.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feWANPortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.2.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feWANPortQueuePriority 1.3.6.1.4.1.27304.12.2.2.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feWANPortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.2.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feWANPortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.2.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feWANPortMap2PIRL 1.3.6.1.4.1.27304.12.2.2.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feWANPortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.2.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feWANPortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.2.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feWANPortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.2.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feWANPortDefaultVLAN 1.3.6.1.4.1.27304.12.2.2.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feWANPortForceDefaultVID 1.3.6.1.4.1.27304.12.2.2.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feWANPortVLANPortMode 1.3.6.1.4.1.27304.12.2.2.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feWANPortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.2.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feWANPortIGMPSnooping 1.3.6.1.4.1.27304.12.2.2.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feWANPortAddUnicast 1.3.6.1.4.1.27304.12.2.2.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feWANPortAddMulticast 1.3.6.1.4.1.27304.12.2.2.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
               feWANPortArpMirroring 1.3.6.1.4.1.27304.12.2.2.23 integer read-write
Mirror ARP packets seen on the port to the CPU port.
           feLAN1Port 1.3.6.1.4.1.27304.12.2.3
               feLAN1PortAutoNegotiation 1.3.6.1.4.1.27304.12.2.3.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feLAN1PortSpeedMode 1.3.6.1.4.1.27304.12.2.3.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
               feLAN1PortLinkStatus 1.3.6.1.4.1.27304.12.2.3.3 integer read-only
Gets the Link status for the port
               feLAN1PortFlowControl 1.3.6.1.4.1.27304.12.2.3.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feLAN1PortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.3.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feLAN1PortIPQoSPriority 1.3.6.1.4.1.27304.12.2.3.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feLAN1PortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.3.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feLAN1PortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.3.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feLAN1PortQueuePriority 1.3.6.1.4.1.27304.12.2.3.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feLAN1PortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.3.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feLAN1PortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.3.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feLAN1PortMap2PIRL 1.3.6.1.4.1.27304.12.2.3.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN1PortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.3.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN1PortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.3.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feLAN1PortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.3.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feLAN1PortDefaultVLAN 1.3.6.1.4.1.27304.12.2.3.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feLAN1PortForceDefaultVID 1.3.6.1.4.1.27304.12.2.3.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feLAN1PortVLANPortMode 1.3.6.1.4.1.27304.12.2.3.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feLAN1PortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.3.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feLAN1PortIGMPSnooping 1.3.6.1.4.1.27304.12.2.3.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feLAN1PortAddUnicast 1.3.6.1.4.1.27304.12.2.3.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feLAN1PortAddMulticast 1.3.6.1.4.1.27304.12.2.3.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
               feLAN1PortArpMirroring 1.3.6.1.4.1.27304.12.2.3.23 integer read-write
Mirror ARP packets seen on the port to the CPU port.
           feLAN2Port 1.3.6.1.4.1.27304.12.2.4
               feLAN2PortAutoNegotiation 1.3.6.1.4.1.27304.12.2.4.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feLAN2PortSpeedMode 1.3.6.1.4.1.27304.12.2.4.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
               feLAN2PortLinkStatus 1.3.6.1.4.1.27304.12.2.4.3 integer read-only
Gets the Link status for the port
               feLAN2PortFlowControl 1.3.6.1.4.1.27304.12.2.4.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feLAN2PortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.4.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feLAN2PortIPQoSPriority 1.3.6.1.4.1.27304.12.2.4.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feLAN2PortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.4.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feLAN2PortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.4.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feLAN2PortQueuePriority 1.3.6.1.4.1.27304.12.2.4.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feLAN2PortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.4.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feLAN2PortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.4.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feLAN2PortMap2PIRL 1.3.6.1.4.1.27304.12.2.4.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN2PortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.4.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN2PortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.4.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feLAN2PortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.4.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feLAN2PortDefaultVLAN 1.3.6.1.4.1.27304.12.2.4.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feLAN2PortForceDefaultVID 1.3.6.1.4.1.27304.12.2.4.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feLAN2PortVLANPortMode 1.3.6.1.4.1.27304.12.2.4.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feLAN2PortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.4.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feLAN2PortIGMPSnooping 1.3.6.1.4.1.27304.12.2.4.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feLAN2PortAddUnicast 1.3.6.1.4.1.27304.12.2.4.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feLAN2PortAddMulticast 1.3.6.1.4.1.27304.12.2.4.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
               feLAN2PortArpMirroring 1.3.6.1.4.1.27304.12.2.4.23 integer read-write
Mirror ARP packets seen on the port to the CPU port.
           feLAN3Port 1.3.6.1.4.1.27304.12.2.5
               feLAN3PortAutoNegotiation 1.3.6.1.4.1.27304.12.2.5.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feLAN3PortSpeedMode 1.3.6.1.4.1.27304.12.2.5.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
               feLAN3PortLinkStatus 1.3.6.1.4.1.27304.12.2.5.3 integer read-only
Gets the Link status for the port
               feLAN3PortFlowControl 1.3.6.1.4.1.27304.12.2.5.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feLAN3PortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.5.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feLAN3PortIPQoSPriority 1.3.6.1.4.1.27304.12.2.5.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feLAN3PortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.5.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feLAN3PortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.5.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feLAN3PortQueuePriority 1.3.6.1.4.1.27304.12.2.5.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feLAN3PortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.5.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feLAN3PortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.5.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feLAN3PortMap2PIRL 1.3.6.1.4.1.27304.12.2.5.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN3PortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.5.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN3PortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.5.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feLAN3PortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.5.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feLAN3PortDefaultVLAN 1.3.6.1.4.1.27304.12.2.5.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feLAN3PortForceDefaultVID 1.3.6.1.4.1.27304.12.2.5.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feLAN3PortVLANPortMode 1.3.6.1.4.1.27304.12.2.5.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feLAN3PortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.5.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feLAN3PortIGMPSnooping 1.3.6.1.4.1.27304.12.2.5.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feLAN3PortAddUnicast 1.3.6.1.4.1.27304.12.2.5.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feLAN3PortAddMulticast 1.3.6.1.4.1.27304.12.2.5.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
               feLAN3PortArpMirroring 1.3.6.1.4.1.27304.12.2.5.23 integer read-write
Mirror ARP packets seen on the port to the CPU port.
           feLAN4Port 1.3.6.1.4.1.27304.12.2.6
               feLAN4PortAutoNegotiation 1.3.6.1.4.1.27304.12.2.6.1 integer read-write
Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable.
               feLAN4PortSpeedMode 1.3.6.1.4.1.27304.12.2.6.2 octet string read-write
Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD)
               feLAN4PortLinkStatus 1.3.6.1.4.1.27304.12.2.6.3 integer read-only
Gets the Link status for the port
               feLAN4PortFlowControl 1.3.6.1.4.1.27304.12.2.6.4 integer read-write
Enables/disables flow control on the port. Set to 1 for enable and 0 for disable.
               feLAN4PortIEEEQoSPriority 1.3.6.1.4.1.27304.12.2.6.5 integer read-write
Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable.
               feLAN4PortIPQoSPriority 1.3.6.1.4.1.27304.12.2.6.6 integer read-write
Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable.
               feLAN4PortFramePriorityOverwrite 1.3.6.1.4.1.27304.12.2.6.7 octet string read-write
Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1.
               feLAN4PortQueuePriorityOverwrite 1.3.6.1.4.1.27304.12.2.6.8 octet string read-write
Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1.
               feLAN4PortQueuePriority 1.3.6.1.4.1.27304.12.2.6.9 octet string read-write
Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1
               feLAN4PortQoSPortMapRule 1.3.6.1.4.1.27304.12.2.6.10 integer read-write
Forces queue priority for a port. Set to 1 for enable and 0 for disable.
               feLAN4PortVIDNRLEnable 1.3.6.1.4.1.27304.12.2.6.11 integer read-write
Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable.
               feLAN4PortMap2PIRL 1.3.6.1.4.1.27304.12.2.6.12 integer read-write
Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN4PortDeletePortMap2PIRL 1.3.6.1.4.1.27304.12.2.6.13 integer read-write
Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11.
               feLAN4PortEgressRateLimitation 1.3.6.1.4.1.27304.12.2.6.14 integer32 read-write
Sets the egress limitation rate for the port. Input parameter is value in kbps
               feLAN4PortIngressRateLimitation 1.3.6.1.4.1.27304.12.2.6.15 octet string read-write
Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC)
               feLAN4PortDefaultVLAN 1.3.6.1.4.1.27304.12.2.6.16 integer read-write
Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095
               feLAN4PortForceDefaultVID 1.3.6.1.4.1.27304.12.2.6.17 integer read-write
Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable.
               feLAN4PortVLANPortMode 1.3.6.1.4.1.27304.12.2.6.18 integer read-write
Sets the 802.1Q mode for the ingress port. Mode either 0=disable, 1=fallback, 2=check, 3=secure
               feLAN4PortBlockAllUnknown 1.3.6.1.4.1.27304.12.2.6.19 integer read-write
This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID.
               feLAN4PortIGMPSnooping 1.3.6.1.4.1.27304.12.2.6.20 integer read-write
Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable.
               feLAN4PortAddUnicast 1.3.6.1.4.1.27304.12.2.6.21 octet string read-write
Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff
               feLAN4PortAddMulticast 1.3.6.1.4.1.27304.12.2.6.22 ipaddress read-write
Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd
               feLAN4PortArpMirroring 1.3.6.1.4.1.27304.12.2.6.23 integer read-write
Mirror ARP packets seen on the port to the CPU port.
       feModuleGroup 1.3.6.1.4.1.27304.12.4
The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00.