DGS3612G-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DGS3612G-L2MGMT-MIB
Download as:   
SNMPv2-CONF, SW36XXPRIMGMT-MIB, SNMPv2-SMI, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.70.9.2
The Structure of Layer 2 Network Management Information.
     swL2DevMgmt 1.3.6.1.4.1.171.11.70.9.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.70.9.2.1.1
             swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.70.9.2.1.1.1 integer read-only
The number of ports within this switch. This value is the sum of the ports within this switch.
             swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.70.9.2.1.1.2 integer read-only
The number of ports in this switch connected to the segment or the end stations.
             swDevModuleInfoTable 1.3.6.1.4.1.171.11.70.9.2.1.1.3 no-access
This table contains the module information.
                 swDevModuleInfoEntry 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1 no-access
A list of management information for each unit in the system.
                     swDevModuleInfoUnitID 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.1 integer read-only
This object indicates the specific unit ID in the stacking/chassis table.
                     swDevModuleInfoModuleID 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.2 integer read-only
This object indicates the module ID of this unit.
                     swDevModuleInfoModuleName 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.3 displaystring read-only
A textual string containing name of the the module.
                     swDevModuleInfoReversion 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.4 displaystring read-only
A textual string containing reversion of the module.
                     swDevModuleInfoSerial 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.5 displaystring read-only
A textual string containing serial of the module.
                     swDevModuleInfoDescription 1.3.6.1.4.1.171.11.70.9.2.1.1.3.1.6 displaystring read-only
A textual string containing description of the module.
             swDevInfoBootPromVersion 1.3.6.1.4.1.171.11.70.9.2.1.1.4 displaystring read-only
Boot Prom Version.
             swDevInfoFirmwareVersion 1.3.6.1.4.1.171.11.70.9.2.1.1.5 displaystring read-only
Boot firmware Version.
             swDevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.70.9.2.1.1.6 octet string read-only
This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10Gbps. The four remaining bits are currently unused and must be 0.
         swL2DevCtrl 1.3.6.1.4.1.171.11.70.9.2.1.2
             swL2DevCtrlStpState 1.3.6.1.4.1.171.11.70.9.2.1.2.1 integer read-write
This object can be enabled or disabled spanning tree algorithm during runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.70.9.2.1.2.2 integer read-write
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnoopingMcstRTOnly 1.3.6.1.4.1.171.11.70.9.2.1.2.3 integer read-write
Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.70.9.2.1.2.4 integer read-write
This object can be enabled or disabled RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.70.9.2.1.2.5 integer read-write
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.70.9.2.1.2.6 vlanid read-write
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system .
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.70.9.2.1.2.7 vlanid read-write
This object controls which Vlan includes system ip. And the Vlan should have been created.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.70.9.2.1.2.8 integer read-write
This object can enabled or disabled MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.70.9.2.1.2.9 integer read-write
This object indicates the history size of variation MAC in address table. The default value is 1 .
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.70.9.2.1.2.10 integer read-write
This object indicates the time interval in second for trigger the MAC notify message.
             swL2DevCtrlWeb 1.3.6.1.4.1.171.11.70.9.2.1.2.13
                   swL2DevCtrlWebState 1.3.6.1.4.1.171.11.70.9.2.1.2.13.1 integer read-write
This object control web status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.70.9.2.1.2.13.2 integer read-write
This object can designate tcp port. When web disable this object can't accessible.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.70.9.2.1.2.14
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.70.9.2.1.2.14.1 integer read-write
This object control telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.70.9.2.1.2.14.2 integer read-write
This object can designate tcp port. When telnet disable this object can't accessible.
             swL2DevCtrlIpAutoconfig 1.3.6.1.4.1.171.11.70.9.2.1.2.15 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLedPOEState 1.3.6.1.4.1.171.11.70.9.2.1.2.16 integer read-write
When set enabled(1), the POE LED is lighten. When set disabled(2), the Link/ACT/Speed LED is lighten. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlClipagingState 1.3.6.1.4.1.171.11.70.9.2.1.2.17 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.70.9.2.1.2.18 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.70.9.2.1.2.19 integer read-write
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.70.9.2.1.2.22 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2DevAlarm 1.3.6.1.4.1.171.11.70.9.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.70.9.2.1.3.1 integer read-write
When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap. Enumeration: 'disabled': 2, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.70.9.2.1.3.2 integer read-write
This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other. Enumeration: 'disabled': 2, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.70.9.2.1.3.3 integer read-write
This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other. Enumeration: 'disabled': 2, 'enabled': 3.
     swL2MultiFilter 1.3.6.1.4.1.171.11.70.9.2.2
         swL2MultiFilterTable 1.3.6.1.4.1.171.11.70.9.2.2.1 no-access
A table that contains infomation about vlan multicast filter mode.
             swL2MultiFilterEntry 1.3.6.1.4.1.171.11.70.9.2.2.1.1 no-access
A list of multicast filter mode information for each vlan.
                 swL2MultiFilterVid 1.3.6.1.4.1.171.11.70.9.2.2.1.1.1 integer read-only
vid for each vlan
                 swL2MultiFilterMode 1.3.6.1.4.1.171.11.70.9.2.2.1.1.2 integer read-write
vlan multicast filter mode. Enumeration: 'forward-unregistered-groups': 2, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
     swL2PortMgmt 1.3.6.1.4.1.171.11.70.9.2.3
         swL2PortInfoTable 1.3.6.1.4.1.171.11.70.9.2.3.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.70.9.2.3.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.70.9.2.3.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInfoMediumType 1.3.6.1.4.1.171.11.70.9.2.3.1.1.2 integer read-only
Indicates medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortInfoUnitID 1.3.6.1.4.1.171.11.70.9.2.3.1.1.3 integer read-only
Indicates ID of the unit in the system
                 swL2PortInfoType 1.3.6.1.4.1.171.11.70.9.2.3.1.1.4 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-100Base-X': 3, 'portType-10GBase-R': 6, 'portType-none': 0, 'portType-100Base-T': 2, 'portType-user-last': 10, 'portType-SIO': 8, 'portType-1000Base-T': 4, 'portType-1000Base-X': 5, 'portType-module-empty': 9, 'portType-10GBase-CX4': 7.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.70.9.2.3.1.1.5 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.70.9.2.3.1.1.6 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps-backp': 3, 'half-100Mbps-backp': 7, 'full-100Mbps-none': 6, 'half-10Gigabps-none': 16, 'err-disabled': 18, 'full-100Mbps-8023x': 5, 'half-1Gigabps-backp': 11, 'full-1Gigabps-none': 10, 'full-10Mbps-8023x': 1, 'full-10Gigabps-8023x': 13, 'half-100Mbps-none': 8, 'full-10Gigabps-none': 14, 'half-10Mbps-none': 4, 'half-1Gigabps-none': 12, 'full-10Mbps-none': 2, 'link-down': 0, 'half-10Gigabps-8023x': 15, 'full-1Gigabps-8023x': 9, 'empty': 17.
                 swL2PortInfoErrDisReason 1.3.6.1.4.1.171.11.70.9.2.3.1.1.7 integer read-only
This object indicates the port if disabled and why error disabled. Enumeration: 'lbd-control': 3, 'err-none': 1, 'storm-control': 2.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.70.9.2.3.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.70.9.2.3.2.1 no-access
A list of control information for each port of the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.70.9.2.3.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlMediumType 1.3.6.1.4.1.171.11.70.9.2.3.2.1.2 integer read-only
Indicates medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.70.9.2.3.2.1.3 integer read-only
Indicates ID of the unit in the device
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.70.9.2.3.2.1.4 integer read-write
This object decide the port enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.70.9.2.3.2.1.5 integer read-write
Chose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-disabled-1Gigabps-Full-master': 9, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'nway-disabled-1Gigabps-Full-slave': 10, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.70.9.2.3.2.1.6 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlLockState 1.3.6.1.4.1.171.11.70.9.2.3.2.1.7 integer read-write
This object decide the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.70.9.2.3.2.1.8 integer read-write
This object set each port MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlAutoNegRestart 1.3.6.1.4.1.171.11.70.9.2.3.2.1.11 integer read-write
If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect. Enumeration: 'norestart': 2, 'restart': 1.
                 swL2PortCtrlAutoNegCapAdvertisedBits 1.3.6.1.4.1.171.11.70.9.2.3.2.1.12 ianaifmauautonegcapbits read-write
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
         swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.70.9.2.3.3 integer read-write
This object configure the switch's jumbo frame settings. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2PortCtrlJumboFrameMaxSize 1.3.6.1.4.1.171.11.70.9.2.3.4 integer32 read-only
This object configure the switch's jumbo frame settings.
         swL2PortAutoNegInfoTable 1.3.6.1.4.1.171.11.70.9.2.3.8 no-access
A table that contains information about every port's auto negotiation status.
             swL2PortAutoNegInfoEntry 1.3.6.1.4.1.171.11.70.9.2.3.8.1 no-access
A list of information for each port auto negotiation of the device.
                 swL2PortAutoNegInfoPortIndex 1.3.6.1.4.1.171.11.70.9.2.3.8.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortAutoNegInfoAdminStatus 1.3.6.1.4.1.171.11.70.9.2.3.8.1.2 integer read-only
If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2PortAutoNegInfoCapabilityBits 1.3.6.1.4.1.171.11.70.9.2.3.8.1.3 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
                 swL2PortAutoNegInfoCapAdvertisedBits 1.3.6.1.4.1.171.11.70.9.2.3.8.1.4 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
                 swL2PortAutoNegInfoCapReceivedBits 1.3.6.1.4.1.171.11.70.9.2.3.8.1.5 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
         swL2PortDropCounterTable 1.3.6.1.4.1.171.11.70.9.2.3.9 no-access
A table that contains information for each port drop counter.
             swL2PortDropCounterEntry 1.3.6.1.4.1.171.11.70.9.2.3.9.1 no-access
A list of information for each port auto negotiation of the device.
                 swL2PortDropCounterPortIndex 1.3.6.1.4.1.171.11.70.9.2.3.9.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortBufferFullDrops 1.3.6.1.4.1.171.11.70.9.2.3.9.1.2 counter read-only
The total number of packets discarded while buffer full.
                 swL2PortACLDrops 1.3.6.1.4.1.171.11.70.9.2.3.9.1.3 counter read-only
The total number of packets denied by ACLs.
                 swL2PortMulticastDrops 1.3.6.1.4.1.171.11.70.9.2.3.9.1.4 counter read-only
The total number of multicast packet that is discarded.
                 swL2PortVLANIngressDrops 1.3.6.1.4.1.171.11.70.9.2.3.9.1.5 counter read-only
The total number of packets discarded by VLAN ingress checking.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.70.9.2.6
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.70.9.2.6.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.70.9.2.6.1.1 no-access
A list of information contained in swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.70.9.2.6.1.1.1 integer read-only
Indicates the port .
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.70.9.2.6.1.1.2 integer read-write
Indicates RX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.70.9.2.6.1.1.3 integer read-write
Indicates TX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.70.9.2.6.1.1.4 integer read-only
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.70.9.2.6.1.1.5 integer read-only
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.70.9.2.6.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.70.9.2.6.2.1 no-access
A list of information contained in swL2QOSSchedulingTable.
                 swL2QOSSchedulingPort 1.3.6.1.4.1.171.11.70.9.2.6.2.1.1 integer read-only
Indicates the port number.
                 swL2QOSSchedulingClassID 1.3.6.1.4.1.171.11.70.9.2.6.2.1.2 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.70.9.2.6.2.1.3 integer read-write
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.
                 swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.70.9.2.6.2.1.4 integer read-write
Indicates the mechanism of QOS scheduling. Enumeration: 'weightfair': 3, 'strict': 1.
                 swL2QOSSchedulingMechanismEffec 1.3.6.1.4.1.171.11.70.9.2.6.2.1.5 integer read-only
Indicates the effective mechanism of QoS scheduling. If the swQoSSchedulingWeight is configured to be 0, then this object will always display strict (1). Enumeration: 'weightfair': 3, 'strict': 1.
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.70.9.2.6.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.70.9.2.6.3.1 no-access
A list of information contained in swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.70.9.2.6.3.1.1 integer read-only
The 802.1p user priority .
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.70.9.2.6.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.70.9.2.6.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.70.9.2.6.4.1 no-access
A list of information contained in swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.70.9.2.6.4.1.1 integer read-only
Indicates the port number .
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.70.9.2.6.4.1.2 integer read-write
The priority value to assign to untagged packets received by the switch ports on the switch..
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.70.9.2.6.4.1.3 integer read-only
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
         swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.70.9.2.6.5 integer read-write
This object can control QOS scheduling Mechanism. Enumeration: 'weightfair': 3, 'strict': 1.
         swL2QOSHolPreventionCtrl 1.3.6.1.4.1.171.11.70.9.2.6.6 integer read-write
Control QOS Hol Prevention Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swCosBandwidthControlTable 1.3.6.1.4.1.171.11.70.9.2.6.7 no-access
A table that contains information about CoS Bandwidth Control on each port.
             swCosBandwidthControlEntry 1.3.6.1.4.1.171.11.70.9.2.6.7.1 no-access
A list that contains CoS Bandwidth Control information for each port.
                 swCosBandwidthPort 1.3.6.1.4.1.171.11.70.9.2.6.7.1.1 integer read-only
This object indicates the port number.
                 swCosBandwidthClassID 1.3.6.1.4.1.171.11.70.9.2.6.7.1.2 integer read-only
Indicates the hardware queue number.
                 swCosBandwidthMinRate 1.3.6.1.4.1.171.11.70.9.2.6.7.1.3 integer read-write
Indicates the Minimum Rate of the specified port. A value of 0 means no limit.
                 swCosBandwidthMaxRate 1.3.6.1.4.1.171.11.70.9.2.6.7.1.4 integer read-write
Indicates the Maximum Rate of the specified port. A value of 0 means no limit.
         swCpuRxRateControlTable 1.3.6.1.4.1.171.11.70.9.2.6.8 no-access
A table that contains information about CPU receiving rate control.
             swCpuRxRateControlEntry 1.3.6.1.4.1.171.11.70.9.2.6.8.1 no-access
A list that contains CPU CoS receiving rate control information.
                 swCpuRxClassID 1.3.6.1.4.1.171.11.70.9.2.6.8.1.1 integer no-access
Indicates the Class of Service ID.
                 swCpuRxRateControlStatus 1.3.6.1.4.1.171.11.70.9.2.6.8.1.2 integer read-write
Indicates the status of receiving rate control. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.70.9.2.7
         swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.70.9.2.7.1 no-access
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
             swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.70.9.2.7.1.1 no-access
A list of information contained in swL2PortSecurityControlTable.
                 swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.70.9.2.7.1.1.1 integer read-only
Indicates the secured port to lock address learning.
                 swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.70.9.2.7.1.1.2 integer read-write
Indicates allowable number of addresses to be learned at this port.
                 swL2PortSecurityMode 1.3.6.1.4.1.171.11.70.9.2.7.1.1.3 integer read-write
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(4) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion. Enumeration: 'permanent': 2, 'other': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 4.
                 swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.70.9.2.7.1.1.4 integer read-write
Indicates administration state of locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
         swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.70.9.2.7.2
             swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.70.9.2.7.2.1 displaystring read-write
Indicates vlan name.
             swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.70.9.2.7.2.2 integer read-write
Indicates the port.0 indicated the function isn't working now.
             swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.70.9.2.7.2.3 macaddress read-write
Specifies MAC address.
             swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.70.9.2.7.2.4 integer read-write
. Enumeration: 'start': 2, 'none': 1.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.70.9.2.9
         swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.70.9.2.9.1 integer read-only
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
         swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.70.9.2.9.2 integer read-only
Current actived number of entries in the trunk configuration table.
         swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.70.9.2.9.3 no-access
This table specifys which ports group a set of ports(up to 8) into a single logical link.
             swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.70.9.2.9.3.1 no-access
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
                 swL2TrunkIndex 1.3.6.1.4.1.171.11.70.9.2.9.3.1.1 integer read-only
The index of logical port trunk. The trunk group number depend on the existence of unit and module.
                 swL2TrunkMasterPort 1.3.6.1.4.1.171.11.70.9.2.9.3.1.3 integer read-only
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swL2TrunkMember 1.3.6.1.4.1.171.11.70.9.2.9.3.1.4 portlist read-only
Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks.
                 swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.70.9.2.9.3.1.5 integer read-only
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
                 swL2TrunkType 1.3.6.1.4.1.171.11.70.9.2.9.3.1.6 integer read-only
This object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group . Enumeration: 'lacp': 3, 'other': 1, 'static': 2.
                 swL2TrunkState 1.3.6.1.4.1.171.11.70.9.2.9.3.1.7 rowstatus read-only
This object indicates the status of this entry.
                 swL2TrunkActivePorts 1.3.6.1.4.1.171.11.70.9.2.9.3.1.8 portlist read-only
The object indicates the active ports of the port trunk entry.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.70.9.2.9.4 integer read-write
This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'ip-source': 5, 'mac-destination': 3, 'mac-source': 2, 'mac-source-dest': 4, 'ip-source-dest': 7, 'ip-destination': 6, 'other': 1.
         swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.70.9.2.9.5 no-access
This table specifys which ports group a set of ports(up to 8) into a single logical link.
             swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.70.9.2.9.5.1 no-access
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
                 swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.70.9.2.9.5.1.1 integer read-only
The index of logical port lacp.
                 swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.70.9.2.9.5.1.2 integer read-write
The state of logical port lacp. Enumeration: 'active': 1, 'passive': 2.
         swL2TrunkVLANTable 1.3.6.1.4.1.171.11.70.9.2.9.6 no-access
This table is used to manage the VLAN trunking feature of the device.
             swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.70.9.2.9.6.1 no-access
This object is used to configure the VLAN trunking settings for each port.
                 swL2TrunkVLANPort 1.3.6.1.4.1.171.11.70.9.2.9.6.1.1 integer read-only
This object indicates the port being configured.
                 swL2TrunkVLANState 1.3.6.1.4.1.171.11.70.9.2.9.6.1.2 integer read-write
The state of the logical port LACP. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2MirrorMgmt 1.3.6.1.4.1.171.11.70.9.2.10
           swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.70.9.2.10.1 integer read-write
This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
           swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.70.9.2.10.2 portlist read-write
The represent the ingress into the source port packet to sniffed.
           swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.70.9.2.10.3 portlist read-write
The represent the egress from the source port packet to sniffed.
           swL2MirrorPortState 1.3.6.1.4.1.171.11.70.9.2.10.4 integer read-write
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2MirrorGroupTable 1.3.6.1.4.1.171.11.70.9.2.10.5 no-access
This table specifies information about the Mirror group configuration.
               swL2MirrorGroupEntry 1.3.6.1.4.1.171.11.70.9.2.10.5.1 no-access
A list of information about each Mirror group configuration.
                   swL2MirrorGroupID 1.3.6.1.4.1.171.11.70.9.2.10.5.1.1 integer no-access
This object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project.
                   swL2MirrorGroupRowStatus 1.3.6.1.4.1.171.11.70.9.2.10.5.1.2 rowstatus read-only
This object manages this mirror group entry.
                   swL2MirrorGroupState 1.3.6.1.4.1.171.11.70.9.2.10.5.1.3 integer read-only
This object indicates the mirror group state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2MirrorGroupLogicTargetPort 1.3.6.1.4.1.171.11.70.9.2.10.5.1.4 integer read-only
This object indicates the mirror group target port.
                   swL2MirrorGroupPortSourceIngress 1.3.6.1.4.1.171.11.70.9.2.10.5.1.5 portlist read-only
This object indicates the mirror group ingress source ports.
                   swL2MirrorGroupPortSourceEngress 1.3.6.1.4.1.171.11.70.9.2.10.5.1.6 portlist read-only
This object indicates the mirror group engress source ports.
     swL2IGMPMgmt 1.3.6.1.4.1.171.11.70.9.2.11
           swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.70.9.2.11.1 integer read-only
Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable).
           swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.70.9.2.11.2 integer read-only
Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
           swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.70.9.2.11.3 no-access
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
               swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.70.9.2.11.3.1 no-access
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
                   swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.70.9.2.11.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
                   swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.70.9.2.11.3.1.2 integer read-write
The frequency at which IGMP Host-Query packets are transmitted on this switch.
                   swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.70.9.2.11.3.1.3 integer read-write
The maximum query response time on this switch.
                   swL2IGMPRobustness 1.3.6.1.4.1.171.11.70.9.2.11.3.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                   swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.70.9.2.11.3.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                   swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.70.9.2.11.3.1.6 integer read-write
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997.
                   swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.70.9.2.11.3.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                   swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.70.9.2.11.3.1.8 integer read-write
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                   swL2IGMPQueryState 1.3.6.1.4.1.171.11.70.9.2.11.3.1.9 integer read-write
This object decide the IGMP query enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IGMPCurrentState 1.3.6.1.4.1.171.11.70.9.2.11.3.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                   swL2IGMPCtrlState 1.3.6.1.4.1.171.11.70.9.2.11.3.1.11 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.70.9.2.11.3.1.12 integer read-write
This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for this entry. enable(3) - IGMP fast-leave funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   swL2IGMPQueryVersion 1.3.6.1.4.1.171.11.70.9.2.11.3.1.13 integer read-write
Configure the IGMP version of query packet which will be sent by the router.
                   swL2IGMPReportSuppression 1.3.6.1.4.1.171.11.70.9.2.11.3.1.15 integer read-write
When enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port. Enumeration: 'disabled': 2, 'enabled': 1.
           swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.70.9.2.11.4 no-access
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
               swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.70.9.2.11.4.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
                   swL2IGMPInfoVid 1.3.6.1.4.1.171.11.70.9.2.11.4.1.1 integer read-only
This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
                   swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.70.9.2.11.4.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
                   swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.70.9.2.11.4.1.3 integer read-only
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
           swL2IGMPInfoTable 1.3.6.1.4.1.171.11.70.9.2.11.5 no-access
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
               swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.70.9.2.11.5.1 no-access
Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
                   swL2IGMPVid 1.3.6.1.4.1.171.11.70.9.2.11.5.1.1 integer read-only
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
                   swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.70.9.2.11.5.1.2 ipaddress read-only
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
                   swL2IGMPMacAddr 1.3.6.1.4.1.171.11.70.9.2.11.5.1.3 macaddress read-only
This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.
                   swL2IGMPPortMap 1.3.6.1.4.1.171.11.70.9.2.11.5.1.4 portlist read-only
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero.
                   swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.70.9.2.11.5.1.5 integer read-only
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
           swL2IGMPRouterPortsTable 1.3.6.1.4.1.171.11.70.9.2.11.6 no-access
The table controls the Vlan's IGMP router ports function.
               swL2IGMPRouterPortsEntry 1.3.6.1.4.1.171.11.70.9.2.11.6.1 no-access
The entry in IGMP router ports table (swL2IGMPRouterPortsTable).
                   swL2IGMPRouterPortsVid 1.3.6.1.4.1.171.11.70.9.2.11.6.1.1 integer read-only
This object indicates the IGMP router ports entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP ports Table.
                   swL2IGMPRouterStaticPortList 1.3.6.1.4.1.171.11.70.9.2.11.6.1.2 portlist read-write
                   swL2IGMPRouterDynamicPortList 1.3.6.1.4.1.171.11.70.9.2.11.6.1.3 portlist read-only
                   swL2IGMPRouterForbiddenPortList 1.3.6.1.4.1.171.11.70.9.2.11.6.1.4 portlist read-write
           swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.70.9.2.11.7 no-access
The information of the IGMP snooping multicast vlan table.
               swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.70.9.2.11.7.1 no-access
The entry of swL2IGMPMulticastVlanTable.
                   swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.70.9.2.11.7.1.1 integer read-only
This object indicates the vlan id of the IGMP snooping multicast vlan entry.
                   swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.70.9.2.11.7.1.2 displaystring read-only
This object indicates the vlan name of the IGMP snooping multicast vlan entry.
                   swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.70.9.2.11.7.1.3 portlist read-only
This object indicate the portlist of the source ports of IGMP snooping multicast vlan. The source ports will be set as tag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.70.9.2.11.7.1.4 portlist read-only
This object indicate the portlist of the member ports of IGMP snooping multicast vlan. The source ports will be set as untag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanReplaceSourceIP 1.3.6.1.4.1.171.11.70.9.2.11.7.1.5 ipaddress read-write
The replace source IP of this multicast vlan.
                   swL2IGMPMulticastVlanRangeName 1.3.6.1.4.1.171.11.70.9.2.11.7.1.6 displaystring read-write
The name of multicast address range. When read, it shows NULL.
                   swL2IGMPMulticastVlanRangeState 1.3.6.1.4.1.171.11.70.9.2.11.7.1.7 integer read-write
This object is uesed to add or delete the specified multicast address range. when read it shows none(1); when set add(2) or delete(3),the swL2IGMPMulticastVlanRangeName should not be NULL. When set deleteAll(4), means delete all swL2IGMPMulticastVlanRangeName on this vlan. Enumeration: 'none': 1, 'deleteAll': 4, 'add': 2, 'delete': 3.
                   swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.70.9.2.11.7.1.8 integer read-write
This object can be enabled or disabled IGMP_snooping multicast VLAN. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.70.9.2.11.7.1.9 rowstatus read-only
This object indicates the status of this entry.
                   swL2IGMPMulticastVlanUntagSourcePort 1.3.6.1.4.1.171.11.70.9.2.11.7.1.10 portlist read-write
This object indicates the untagged member ports to add to the multicast VLAN.
                   swL2IGMPMulticastVlanRemapPriority 1.3.6.1.4.1.171.11.70.9.2.11.7.1.11 integer read-only
The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.
                   swL2IGMPMulticastVlanReplacePriority 1.3.6.1.4.1.171.11.70.9.2.11.7.1.12 integer read-only
Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. Enumeration: 'false': 2, 'true': 1.
                   swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.70.9.2.11.7.1.13 portlist read-write
This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.
           swL2IGMPForwardingTable 1.3.6.1.4.1.171.11.70.9.2.11.8 no-access
The table containing current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
               swL2IGMPForwardingEntry 1.3.6.1.4.1.171.11.70.9.2.11.8.1 no-access
Information about current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
                   swL2IGMPForwardingVid 1.3.6.1.4.1.171.11.70.9.2.11.8.1.1 integer read-only
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
                   swL2IGMPForwardingSrcIp 1.3.6.1.4.1.171.11.70.9.2.11.8.1.2 ipaddress read-only
This object is identify source ip address.
                   swL2IGMPForwardingGroupAddr 1.3.6.1.4.1.171.11.70.9.2.11.8.1.3 ipaddress read-only
This object is identify group ip address.
                   swL2IGMPForwardingPortMember 1.3.6.1.4.1.171.11.70.9.2.11.8.1.4 portlist read-only
This object indicates which ports are belong to the same multicast group, in per-Vlan basis.
           swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.70.9.2.11.9 no-access
The table containing the IGMP snooping multicast VLAN group information
               swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.70.9.2.11.9.1 no-access
Information about current IGMP snooping multicast VLAN group.
                   swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.70.9.2.11.9.1.1 integer read-only
This object indicates the Vid of IGMP snooping multicast VLAN group.
                   swL2IGMPMulticastVlanGroupRangeName 1.3.6.1.4.1.171.11.70.9.2.11.9.1.2 displaystring read-only
The name of multicast address range.
                   swL2IGMPMulticastVlanGroupHead 1.3.6.1.4.1.171.11.70.9.2.11.9.1.3 ipaddress read-only
The head of multicast address range.
                   swL2IGMPMulticastVlanGroupTail 1.3.6.1.4.1.171.11.70.9.2.11.9.1.4 ipaddress read-only
The tail of multicast address range.
           swIGMPSnoopingGroupTable 1.3.6.1.4.1.171.11.70.9.2.11.11 no-access
The table contains the current IGMP snooping group information captured by the device.
                 swIGMPSnoopingGroupEntry 1.3.6.1.4.1.171.11.70.9.2.11.11.1 no-access
Information about the current IGMP snooping group information which has been captured by the device.
                     swIGMPSnoopingGroupVid 1.3.6.1.4.1.171.11.70.9.2.11.11.1.1 integer read-only
This object indicates the VID of the individual IGMP snooping group table entry.
                     swIGMPSnoopingGroupGroupAddr 1.3.6.1.4.1.171.11.70.9.2.11.11.1.2 ipaddress read-only
This object identifies the group IP address which have been captured from the IGMP packet, on a per-VLAN basis.
                     swIGMPSnoopingGroupSourceAddr 1.3.6.1.4.1.171.11.70.9.2.11.11.1.3 ipaddress read-only
This object identifies the source addresses.
                     swIGMPSnoopingGroupIncludePortMap 1.3.6.1.4.1.171.11.70.9.2.11.11.1.4 portlist read-only
This object indicates the port list under INCLUDE mode.
                     swIGMPSnoopingGroupExcludePortMap 1.3.6.1.4.1.171.11.70.9.2.11.11.1.5 portlist read-only
This object indicates the port list under EXCLUDE mode.
           swL2IGMPSnoopingStaticGroupTable 1.3.6.1.4.1.171.11.70.9.2.11.16 no-access
The table contains the current IGMP snooping static group information captured by the device.
                 swL2IGMPSnoopingStaticGroupEntry 1.3.6.1.4.1.171.11.70.9.2.11.16.1 no-access
Information about current IGMP snooping static group information captured by the device.
                     swL2IGMPSnoopingStaticGroupVID 1.3.6.1.4.1.171.11.70.9.2.11.16.1.1 integer read-only
This object indicates the VID of the current IGMP snooping static group.
                     swL2IGMPSnoopingStaticGroupIPaddress 1.3.6.1.4.1.171.11.70.9.2.11.16.1.2 ipaddress read-only
This object indicates the current IGMP snooping static group IP address.
                     swL2IGMPSnoopingStaticGroupMemberPortList 1.3.6.1.4.1.171.11.70.9.2.11.16.1.3 portlist read-write
This object indicates the current IGMP snooping static group Member Portlist.
                     swL2IGMPSnoopingStaticGroupRowStatus 1.3.6.1.4.1.171.11.70.9.2.11.16.1.4 rowstatus read-only
This object indicates the status of this entry.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.70.9.2.14
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.70.9.2.14.1 no-access
This table specifys the port just can forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.70.9.2.14.1.1 no-access
A list of information specifies the port with its traffic forward list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.70.9.2.14.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.70.9.2.14.1.1.2 portlist read-write
The port list that the specific port can forward traffic.
     swL2IpLimitedMulticastMgmt 1.3.6.1.4.1.171.11.70.9.2.15
           swL2IpLimitedMulticastTable 1.3.6.1.4.1.171.11.70.9.2.15.1 no-access
This entity's per-port Limited IP multicast address range table.
               swL2IpLimitedMulticastEntry 1.3.6.1.4.1.171.11.70.9.2.15.1.1 no-access
A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
                   swL2IpLimitedMulticastPortIndex 1.3.6.1.4.1.171.11.70.9.2.15.1.1.1 integer read-only
A port to config the limited multicast address.
                   swL2IpLimitedMulticastHead 1.3.6.1.4.1.171.11.70.9.2.15.1.1.2 ipaddress no-access
The head of multicast address range.
                   swL2IpLimitedMulticastTail 1.3.6.1.4.1.171.11.70.9.2.15.1.1.3 ipaddress no-access
The tail of multicast address range.
                   swL2IpLimitedMulticastAccess 1.3.6.1.4.1.171.11.70.9.2.15.1.1.4 integer read-write
It allow you to permit or deny multicast range. Enumeration: 'none': 0, 'deny': 2, 'permit': 1.
                   swL2IpLimitedMulticastState 1.3.6.1.4.1.171.11.70.9.2.15.1.1.5 integer read-write
Enable or disable limited multicast address for the chosen port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IpLimitedMulticastDelState 1.3.6.1.4.1.171.11.70.9.2.15.1.1.6 integer no-access
Enable or disable delete limited multicast address for the chosen port. Enumeration: 'valid': 1, 'invalid': 2.
                   swL2IpLimitedMulticastRangeName 1.3.6.1.4.1.171.11.70.9.2.15.1.1.7 displaystring read-write
The name of multicast address range. When read, it shows NULL.
                   swL2IpLimitedMulticastRangeNameState 1.3.6.1.4.1.171.11.70.9.2.15.1.1.8 integer read-write
Add or delete the specified multicast address range. When read, it shows other(1); When set add(2) or delete(3), the swL2IpLimitedMulticastRangeName should be set also, and it should not be NULL. When set deleteAll(4), means delete all swL2IpLimitedMulticastRangeName on this port. And the set multicast range name value could be gotten in swL2LimitedMulticastAddressTable. Enumeration: 'deleteAll': 4, 'add': 2, 'other': 1, 'delete': 3.
           swL2LimitedMulticastAddressTable 1.3.6.1.4.1.171.11.70.9.2.15.2 no-access
A table contains the limited multicast address information.
               swL2LimitedMulticastAddressEntry 1.3.6.1.4.1.171.11.70.9.2.15.2.1 no-access
The information of limited multicast address.
                   swL2LimitedMulticastAddressPort 1.3.6.1.4.1.171.11.70.9.2.15.2.1.1 integer read-only
The port index.
                   swL2LimitedMulticastAddressRangeName 1.3.6.1.4.1.171.11.70.9.2.15.2.1.2 displaystring read-only
The name of multicast address range.
                   swL2LimitedMulticastAddressHead 1.3.6.1.4.1.171.11.70.9.2.15.2.1.3 ipaddress read-only
The head of multicast address range.
                   swL2LimitedMulticastAddressTail 1.3.6.1.4.1.171.11.70.9.2.15.2.1.4 ipaddress read-only
The tail of multicast address range.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.70.9.2.16
           swL2Notify 1.3.6.1.4.1.171.11.70.9.2.16.1
               swL2NotifyPrefix 1.3.6.1.4.1.171.11.70.9.2.16.1.2
                   swL2NotifFirmware 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0
                       swL2macNotification 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0.1
This trap indicates the mac addresses variation in address table .
                       swL2PortLoopOccurred 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0.3
The trap is sent when Port loop occurred.
                       swL2PortLoopRestart 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0.4
The trap is sent when Port loop restart after interval time.
                       swL2VlanLoopOccurred 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0.5
The trap is sent when Port with VID loop occurred.
                       swL2VlanLoopRestart 1.3.6.1.4.1.171.11.70.9.2.16.1.2.0.6
The trap is sent when Port with VID loop restart after interval time.
                   swl2NotificationBidings 1.3.6.1.4.1.171.11.70.9.2.16.1.2.1
                       swL2macNotifyInfo 1.3.6.1.4.1.171.11.70.9.2.16.1.2.1.1 octet string read-only
This object indicates the last time reboot information.
                       swL2VlanLoopDetectVID 1.3.6.1.4.1.171.11.70.9.2.16.1.2.1.3 integer no-access
This object indicates the VID that has detected a loopback.
     swL2VlanMgmt 1.3.6.1.4.1.171.11.70.9.2.17
           swL2VlanTable 1.3.6.1.4.1.171.11.70.9.2.17.1 no-access
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
               swL2VlanEntry 1.3.6.1.4.1.171.11.70.9.2.17.1.1 no-access
Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
                   swL2VlanIndex 1.3.6.1.4.1.171.11.70.9.2.17.1.1.1 vlanid no-access
The VLAN ID of the VLAN to be created. The range is 1 - 4094.
                   swL2VlanName 1.3.6.1.4.1.171.11.70.9.2.17.1.1.2 displaystring read-only
The name of the VLAN to be displayed.
                   swL2VlanType 1.3.6.1.4.1.171.11.70.9.2.17.1.1.3 integer read-only
The type of the VLAN to be displayed. Enumeration: 'static-1q-vlan': 1, 'double-vlan': 5, 'invalid-vlan-type': 0, 'dynamic-vlan': 2, 'protocolvlan': 4, 'port-base-vlan': 3.
                   swL2VlanMemberPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.4 portlist read-only
A range of member ports to the VLAN.
                   swL2VlanStaticPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.5 portlist read-only
A range of static ports to the VLAN.
                   swL2VlanStaticTaggedPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.6 portlist read-only
Specifies the additional ports as tagged.
                   swL2VlanStaticUntaggedPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.7 portlist read-only
Specifies the additional ports as untagged.
                   swL2VlanForbiddenPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.8 portlist read-only
The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
                   swL2VlanCurrentTaggedPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.9 portlist read-only
The set of ports which are transmitting traffic for this VLAN as tagged frames.
                   swL2VlanCurrentUntaggedPorts 1.3.6.1.4.1.171.11.70.9.2.17.1.1.10 portlist read-only
The set of ports which are transmitting traffic for this VLAN as untagged frames.
                   swL2VlanAdvertisementState 1.3.6.1.4.1.171.11.70.9.2.17.1.1.11 integer read-write
Specifies the VLAN as able to join GVRP If this parameter is not set, the VLAN cannot be configured to have forbidden ports. This flag protocol VLAN is fixed to DISABLE. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2PVIDAutoAssignmentState 1.3.6.1.4.1.171.11.70.9.2.17.2 integer read-write
This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change PVID. If 'Auto-assign PVID' is enabled, PVID will be possibly changed by PVID or VLAN configuration. When user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. In the form of VLAN list command, PVID is updated with last item of VLAN list. When user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned with 'default VLAN'. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2dot1vProtocolMgmt 1.3.6.1.4.1.171.11.70.9.2.18
           swL2dot1vProtocolGroupTable 1.3.6.1.4.1.171.11.70.9.2.18.1 no-access
A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
               swL2dot1vProtocolGroupEntry 1.3.6.1.4.1.171.11.70.9.2.18.1.1 no-access
A mapping from a Protocol Template to a Protocol Group Identifier.
                   swL2dot1vProtocolTemplateFrameType 1.3.6.1.4.1.171.11.70.9.2.18.1.1.1 integer read-only
The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template. Enumeration: 'ethernet': 1, 'llcOther': 3, 'rfc1042': 2.
                   swL2dot1vProtocolTemplateProtocolValue 1.3.6.1.4.1.171.11.70.9.2.18.1.1.2 octet string read-only
The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
                   swL2dot1vProtocolGroupId 1.3.6.1.4.1.171.11.70.9.2.18.1.1.3 integer32 read-only
Represents a group of protocols that are associated together when assigning a VID to a frame.
                   swL2dot1vProtocolGroupRowStatus 1.3.6.1.4.1.171.11.70.9.2.18.1.1.4 rowstatus read-only
This object indicates the status of this entry.
           swL2dot1vProtocolPortTable 1.3.6.1.4.1.171.11.70.9.2.18.2 no-access
A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
               swL2dot1vProtocolPortEntry 1.3.6.1.4.1.171.11.70.9.2.18.2.1 no-access
A VID set for a port.
                   swL2dot1vProtocolPort 1.3.6.1.4.1.171.11.70.9.2.18.2.1.1 integer32 read-only
The port number of the port.
                   swL2dot1vProtocolPortGroupId 1.3.6.1.4.1.171.11.70.9.2.18.2.1.2 integer32 read-only
Designates a group of protocols in the Protocol Group Database.
                   swL2dot1vProtocolPortGroupVid 1.3.6.1.4.1.171.11.70.9.2.18.2.1.3 integer32 read-write
The VID associated with a group of protocols for each port.
                   swL2dot1vProtocolPortRowStatus 1.3.6.1.4.1.171.11.70.9.2.18.2.1.5 rowstatus read-only
This object indicates the status of this entry.
     swL2MulticastRangeMgmt 1.3.6.1.4.1.171.11.70.9.2.19
           swL2MulticastRangeTable 1.3.6.1.4.1.171.11.70.9.2.19.1 no-access
A table contains multicast address range information.
               swL2MulticastRangeEntry 1.3.6.1.4.1.171.11.70.9.2.19.1.1 no-access
Information about multicast address range.
                   swL2MulticastRangeName 1.3.6.1.4.1.171.11.70.9.2.19.1.1.1 displaystring read-only
The name of multicast address range.
                   swL2MulticastRangeHead 1.3.6.1.4.1.171.11.70.9.2.19.1.1.2 ipaddress read-only
The head of multicast address range.
                   swL2MulticastRangeTail 1.3.6.1.4.1.171.11.70.9.2.19.1.1.3 ipaddress read-only
The tail of multicast address range.
                   swL2MulticastRangeState 1.3.6.1.4.1.171.11.70.9.2.19.1.1.4 rowstatus read-only
This object indicates the status of this entry.
     swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.70.9.2.20
           swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.70.9.2.20.1
               swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.70.9.2.20.1.1 integer read-write
This object indicates the loopback detection status for the system. Enumeration: 'disabled': 2, 'enabled': 1.
               swL2LoopDetectInterval 1.3.6.1.4.1.171.11.70.9.2.20.1.2 integer read-write
This object indicates the interval value, the range is from 1 to 32767 seconds.
               swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.70.9.2.20.1.3 integer read-write
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
               swL2LoopDetectMode 1.3.6.1.4.1.171.11.70.9.2.20.1.4 integer read-write
This object indicates the loopback detection mode for the system. Enumeration: 'port-based': 2, 'vlan-based': 1.
               swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.70.9.2.20.1.5 integer read-write
This object indicates the loopback detection trap mode for the system. Enumeration: 'both': 4, 'none': 1, 'loop_cleared': 3, 'loop_detected': 2.
           swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.70.9.2.20.2
               swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.70.9.2.20.2.1 no-access
The table specifies the loopback detection function specified by port.
                   swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.70.9.2.20.2.1.1 no-access
The table specifies the loopback detection function specified by port.
                       swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.70.9.2.20.2.1.1.1 integer read-only
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
                       swL2LoopDetectPortState 1.3.6.1.4.1.171.11.70.9.2.20.2.1.1.2 integer read-write
This object indicates the loopback detection function state on the port. Enumeration: 'disabled': 2, 'enabled': 1.
                       swL2LoopDetectPortLoopVLAN 1.3.6.1.4.1.171.11.70.9.2.20.2.1.1.3 displaystring read-only
This object indicates the VLAN list that has detected a loopback.
                       swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.70.9.2.20.2.1.1.4 integer read-only
This object indicates the port status. Enumeration: 'none': 4, 'error': 3, 'loop': 2, 'normal': 1.
     swL2DhcpLocalRelayMgmt 1.3.6.1.4.1.171.11.70.9.2.24
           swL2DhcpLocalRelayState 1.3.6.1.4.1.171.11.70.9.2.24.1 integer read-write
This object indicates the status of the DHCP local relay function of the switch. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpLocalRelayVLANTable 1.3.6.1.4.1.171.11.70.9.2.24.2 no-access
This table is used to manage the DHCP local relay status for each VLAN.
               swL2DhcpLocalRelayVLANEntry 1.3.6.1.4.1.171.11.70.9.2.24.2.1 no-access
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
                   swL2DhcpLocalRelayVLANID 1.3.6.1.4.1.171.11.70.9.2.24.2.1.1 integer read-only
This object shows the VIDs of the current VLANS in the switch.
                   swL2DhcpLocalRelayVLANState 1.3.6.1.4.1.171.11.70.9.2.24.2.1.2 integer read-write
This object indicates the status of the DHCP relay function of the VLAN. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.