DGS3426P-L3MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DGS3426P-L3MGMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SW34XXPRIMGMT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL3MgmtMIB 1.3.6.1.4.1.171.11.70.7.3
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
     swL3DevMgmt 1.3.6.1.4.1.171.11.70.7.3.1
         swL3DevCtrl 1.3.6.1.4.1.171.11.70.7.3.1.1
             swL3DevCtrlRIPState 1.3.6.1.4.1.171.11.70.7.3.1.1.1 integer read-write
This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL3IpMgmt 1.3.6.1.4.1.171.11.70.7.3.2
         swL3IpCtrlMgmt 1.3.6.1.4.1.171.11.70.7.3.2.1
             swL3IpCtrlTable 1.3.6.1.4.1.171.11.70.7.3.2.1.3 no-access
This table contain IP interface information.
                 swL3IpCtrlEntry 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1 no-access
A list of information about a specific IP interface.
                     swL3IpCtrlInterfaceName 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3IpCtrlIfIndex 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.2 integer read-only
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
                     swL3IpCtrlIpAddr 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.3 ipaddress read-write
The IP address of the interface. This object only can take the value of the unicast IP address.
                     swL3IpCtrlIpSubnetMask 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.4 ipaddress read-write
The IP net mask for this interface.
                     swL3IpCtrlVlanName 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.5 displaystring read-write
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
                     swL3IpCtrlProxyArp 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.6 integer read-write
This object indicates enable/disable of the proxy ARP function for IPv4. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlSecondary 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.7 truthvalue read-write
When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.
                     swL3IpCtrlMode 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.8 integer read-write
This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server. Enumeration: 'dhcp': 4, 'other': 1, 'bootp': 3.
                     swL3IpCtrlAdminState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.9 integer read-write
The state of the IP interface. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpv6LinkLocalAddress 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.14 ipv6address read-only
The IPv6 link local address for this interface.
                     swL3IpCtrlIpv6LinkLocalPrefixLen 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.15 integer read-only
The IPv6 prefix length for this IPv6 link local address.
                     swL3IpCtrlState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.16 rowstatus read-only
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
                     swL3IpCtrlIpv6LinkLocalAutoState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.17 integer read-write
The state of the IPv6 link local auto. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                     swL3IpCtrlLocalProxyArp 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.18 integer read-only
If the state is enabled, the switch will be allowed to respond to the proxy ARP proxy ARP when the source IP and destination IP are on the same interface. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlDhcpv6ClientState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.20 integer read-write
The state of the Dhcpv6 Client. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDirectedBroadcastState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.21 integer read-write
The state of the IP Directed Broadcast. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDhcpOption12State 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.22 integer read-write
Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDhcpOption12HostName 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.23 displaystring read-write
Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
                     swL3IpCtrlDhcpv6ClientPDState 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.24 integer read-write
The state of the Dhcpv6 Client PD. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlDhcpv6ClientPDPrefixName 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.25 displaystring read-write
This object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.
                     swL3IpCtrlDhcpv6ClientPDPrefix 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.26 ipv6address read-only
The IPv6 prefix obtained form delegation router.
                     swL3IpCtrlDhcpv6ClientPDPrefixLen 1.3.6.1.4.1.171.11.70.7.3.2.1.3.1.27 integer read-only
The IPv6 prefix length for the prefix obtained from delegation router.
             swL3Ipv6CtrlTable 1.3.6.1.4.1.171.11.70.7.3.2.1.4 no-access
This table contains IPv6 information of an IP interface.
                 swL3Ipv6CtrlEntry 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1 no-access
A list of IPv6 information about a specific IP interface.
                     swL3Ipv6CtrlInterfaceName 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3Ipv6CtrlMaxReassmblySize 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.2 integer read-only
Maximum Reassembly Size of the IP interface.
                     swL3Ipv6CtrlNsRetransTimer 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.3 unsigned32 read-write
Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
                     swL3Ipv6CtrlRaState 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.5 integer read-write
Neighbor solicited state. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6CtrlRaMinRtrAdvInterval 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.6 integer read-write
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvInterval
                     swL3Ipv6CtrlRaMaxRtrAdvInterval 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.7 integer read-write
The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.
                     swL3Ipv6CtrlRaLifeTime 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.8 integer read-write
Indicates the lifetime of the router as the default router.
                     swL3Ipv6CtrlRaReachableTime 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.9 integer read-write
Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.
                     swL3Ipv6CtrlRaRetransTime 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.10 unsigned32 read-write
Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.
                     swL3Ipv6CtrlRaHopLimit 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.11 integer read-write
Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.
                     swL3Ipv6CtrlRaManagedFlag 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.12 integer read-write
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6CtrlRaOtherConfigFlag 1.3.6.1.4.1.171.11.70.7.3.2.1.4.1.13 integer read-write
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information. Enumeration: 'disabled': 2, 'enabled': 1.
             swL3Ipv6AddressCtrlTable 1.3.6.1.4.1.171.11.70.7.3.2.1.5 no-access
This table contain IPv6 address information for each IP interface.
                 swL3Ipv6AddressCtrlEntry 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1 no-access
A list of information about a specific IPv6 address.
                     swL3Ipv6AddressCtrlInterfaceName 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3Ipv6Address 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.2 ipv6address read-only
Specify the IPv6 address.
                     swL3Ipv6AddressCtrlPrefixLen 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.3 integer read-only
Indicates the prefix length of this IPv6 address.
                     swL3Ipv6AddressCtrlPreferredLifeTime 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.4 unsigned32 read-write
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff.
                     swL3Ipv6AddressCtrlValidLifeTime 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.5 unsigned32 read-write
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.
                     swL3Ipv6AddressCtrlOnLinkFlag 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.6 integer read-write
When enabled, the address implied by the specified prefix is available on the link where the RA message is received. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6AddressCtrlAutonomousFlag 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.7 integer read-write
When enabled, the specified prefix will be used to create an autonomous address configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6AddressCtrlState 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.8 rowstatus read-only
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
                     swL3Ipv6AddressCtrlAddressType 1.3.6.1.4.1.171.11.70.7.3.2.1.5.1.9 integer read-only
This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement. Enumeration: 'stateless': 3, 'dhcpv6': 2, 'manual': 1.
             swL3Ipv6DHCPv6CPDAddrCtrlTable 1.3.6.1.4.1.171.11.70.7.3.2.1.6 no-access
This table contain the information of the IPv6 address which based on DHCPv6 client PD.
                 swL3Ipv6DHCPv6CPDAddrCtrlEntry 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1 no-access
A list of information about a specific DHCPv6 Client PD IPv6 address.
                     swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3Ipv6DHCPv6CPDAddrCtrlPrefixName 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.2 displaystring read-only
This object indicates the name of the prefix based on which the IPv6 address will be generate.
                     swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.3 ipv6address read-only
Specify the suffix of the IPv6 address.
                     swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.4 integer read-only
Indicates the prefix length of this IPv6 address.
                     swL3Ipv6DHCPv6CPDAddrCtrlState 1.3.6.1.4.1.171.11.70.7.3.2.1.6.1.5 rowstatus read-only
This variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table.
             swL3IpCtrlAllIpIfState 1.3.6.1.4.1.171.11.70.7.3.2.1.7 integer read-write
This object indicates all interface function state of the device. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
         swL3IpFdbMgmt 1.3.6.1.4.1.171.11.70.7.3.2.2
             swL3IpFdbInfoTable 1.3.6.1.4.1.171.11.70.7.3.2.2.1 no-access
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
                 swL3IpFdbInfoEntry 1.3.6.1.4.1.171.11.70.7.3.2.2.1.1 no-access
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
                     swL3IpFdbInfoIpAddr 1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.1 ipaddress read-only
A IP address for which switch has forwarding and/or filtering information.
                     swL3IpFdbInfoIpSubnetMask 1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.2 ipaddress read-only
A IP net mask for this interface.for which switch has forwarding and/or filtering information.
                     swL3IpFdbInfoPort 1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.3 integer read-only
Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.
                     swL3IpFdbInfoType 1.3.6.1.4.1.171.11.70.7.3.2.2.1.1.4 integer read-only
The status of this entry. Enumeration: 'dynamic': 3, 'other': 1, 'static': 2.
         swL3IpArpAgingTime 1.3.6.1.4.1.171.11.70.7.3.2.4 integer read-write
The timeout period in minutes for aging out dynamically learned arp information.
         swL3IpStaticRouteTable 1.3.6.1.4.1.171.11.70.7.3.2.5 no-access
This entity's IP static Routing table.
             swL3IpStaticRouteEntry 1.3.6.1.4.1.171.11.70.7.3.2.5.1 no-access
A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
                 swL3IpStaticRouteDest 1.3.6.1.4.1.171.11.70.7.3.2.5.1.1 ipaddress read-only
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
                 swL3IpStaticRouteMask 1.3.6.1.4.1.171.11.70.7.3.2.5.1.2 ipaddress read-only
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
                 swL3IpStaticRouteBkupState 1.3.6.1.4.1.171.11.70.7.3.2.5.1.3 integer read-only
The routing state for this route.The value SHOULD be primary(1) or backup(2). Enumeration: 'backup': 2, 'primary': 1.
                 swL3IpStaticRouteNextHop 1.3.6.1.4.1.171.11.70.7.3.2.5.1.4 ipaddress read-only
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
                 swL3IpStaticRouteMetric 1.3.6.1.4.1.171.11.70.7.3.2.5.1.5 integer read-only
The routing metric for this route.
                 swL3IpStaticRouteStatus 1.3.6.1.4.1.171.11.70.7.3.2.5.1.6 integer read-only
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table. Enumeration: 'active': 4, 'inActive': 5, 'other': 1, 'valid': 3, 'invalid': 2.
     swL3RelayMgmt 1.3.6.1.4.1.171.11.70.7.3.3
         swL3RelayDhcpMgmt 1.3.6.1.4.1.171.11.70.7.3.3.1
             swL3RelayDhcpState 1.3.6.1.4.1.171.11.70.7.3.3.1.1 integer read-write
This object indicates Dhcp Relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDhcpHopCount 1.3.6.1.4.1.171.11.70.7.3.3.1.2 integer read-write
This object indicates the maximum number of router hops that the BOOTP packets can cross.
             swL3RelayDhcpTimeThreshold 1.3.6.1.4.1.171.11.70.7.3.3.1.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the Dhcp request. If this time is exceeded, the switch will drop the Dhcp packet.
             swL3RelayDhcpCtrlTable 1.3.6.1.4.1.171.11.70.7.3.3.1.4 no-access
This table specifys the IP address as a destination to forward (relay) DHCP packets to.
                 swL3RelayDhcpCtrlEntry 1.3.6.1.4.1.171.11.70.7.3.3.1.4.1 no-access
A list of information specifies the IP address as a destination to forward (relay) DHCP packets to.
                     swL3RelayDhcpCtrlInterfaceName 1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.1 displaystring read-only
The name of the IP interface.
                     swL3RelayDhcpCtrlServer 1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.2 ipaddress read-only
The DHCP server IP address.
                     swL3RelayDhcpCtrlState 1.3.6.1.4.1.171.11.70.7.3.3.1.4.1.3 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
             swL3RelayDhcpOption82State 1.3.6.1.4.1.171.11.70.7.3.3.1.5 integer read-write
This object indicates DHCP Relay Option 82 function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
             swL3RelayDhcpOption82CheckState 1.3.6.1.4.1.171.11.70.7.3.3.1.6 integer read-write
This object indicates DHCP Relay Option 82 Check function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
             swL3RelayDhcpOption82Policy 1.3.6.1.4.1.171.11.70.7.3.3.1.7 integer read-write
This object indicates DHCP Relay Option 82 Policy. Enumeration: 'keep': 2, 'drop': 1, 'replace': 0.
             swL3DHCPRelayOption60 1.3.6.1.4.1.171.11.70.7.3.3.1.8
                 swL3DHCPRelayOption60State 1.3.6.1.4.1.171.11.70.7.3.3.1.8.1 integer read-write
This object indicates DHCP relay option 60 function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL3DHCPRelayOption60DefMode 1.3.6.1.4.1.171.11.70.7.3.3.1.8.2 integer read-write
This object indicates default mode that has no option 60 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption60DefRelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                 swL3DHCPRelayOption60DefTable 1.3.6.1.4.1.171.11.70.7.3.3.1.8.3 no-access
This table indicates the default relay servers for the packet that has no option 60 mathcing rules.
                     swL3DHCPRelayOption60DefEntry 1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1 no-access
A list of information indicates the default relay servers for the packet that has no option 60 mathcing rules.
                         swL3DHCPRelayOption60DefRelayIp 1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1.1 ipaddress read-only
This object indicates the IP address of default relay server.
                         swL3DHCPRelayOption60DefRowStatus 1.3.6.1.4.1.171.11.70.7.3.3.1.8.3.1.2 rowstatus read-only
This object indicates the status of this entry.
                 swL3DHCPRelayOption60Table 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4 no-access
This table indicates the relay servers for the packet at option 60 rules.
                     swL3DHCPRelayOption60Entry 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1 no-access
A list of information indicates the relay servers for the packet at option 60 rules.
                         swL3DHCPRelayOption60String 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.1 displaystring read-only
This object indicates string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string.
                         swL3DHCPRelayOption60RelayIp 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.2 ipaddress read-only
This object indicates the IP address of relay server.
                         swL3DHCPRelayOption60MatchType 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.3 integer read-only
This object indicates match state of this entry. exact(1): means the option 60 string in the packet must full match with the specified string. partial(2): means the option 60 string in the packet only need partial match with the specified string. Enumeration: 'partial': 2, 'exact': 1.
                         swL3DHCPRelayOption60RowStatus 1.3.6.1.4.1.171.11.70.7.3.3.1.8.4.1.4 rowstatus read-only
This object indicates the status of this entry.
             swL3DHCPRelayOption61 1.3.6.1.4.1.171.11.70.7.3.3.1.9
                 swL3DHCPRelayOption61State 1.3.6.1.4.1.171.11.70.7.3.3.1.9.1 integer read-write
This object indicates DHCP relay option 61 function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL3DHCPRelayOption61DefMode 1.3.6.1.4.1.171.11.70.7.3.3.1.9.2 integer read-write
This object indicates default mode that has no option 61 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61DefRelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                 swL3DHCPRelayOption61DefRelayIp 1.3.6.1.4.1.171.11.70.7.3.3.1.9.3 ipaddress read-write
This object indicates the IP address of default relay server that has no option 61 mathcing rules. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.
                 swL3DHCPRelayOption61Table 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4 no-access
This table indicates the relay servers for the packet at option 61 rules.
                     swL3DHCPRelayOption61Entry 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1 no-access
A list of information indicates the relay servers for the packet at option 61 rules.
                         swL3DHCPRelayOption61ClientType 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.1 integer read-only
This object indicates client type of this entry. mac(1): means the client-ID which is the MAC address of client. string(2): means the client-ID which is specified string by administrator. Enumeration: 'mac': 1, 'string': 2.
                         swL3DHCPRelayOption61ClientID 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.2 displaystring read-only
This object indicates string of this entry. When swL3DHCPRelayOption61ClientType is mac(1), the format of this object should be XX-XX-XX-XX-XX-XX (MAC address). Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string.
                         swL3DHCPRelayOption61Mode 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.3 integer read-only
This object indicates mode of this entry. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61RelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                         swL3DHCPRelayOption61RelayIp 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.4 ipaddress read-only
This object indicates the IP address of relay server. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.
                         swL3DHCPRelayOption61RowStatus 1.3.6.1.4.1.171.11.70.7.3.3.1.9.4.1.5 rowstatus read-only
This object indicates the status of this entry.
         swL3RelayDnsMgmt 1.3.6.1.4.1.171.11.70.7.3.3.2
             swL3RelayDnsState 1.3.6.1.4.1.171.11.70.7.3.3.2.1 integer read-write
This object indicates DNS Relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsPrimaryServer 1.3.6.1.4.1.171.11.70.7.3.3.2.2 ipaddress read-write
This object indicates the address of the primary DNS server.
             swL3RelayDnsSecondaryServer 1.3.6.1.4.1.171.11.70.7.3.3.2.3 ipaddress read-write
This object indicates the address of the secondary DNS server.
             swL3RelayDnsCacheState 1.3.6.1.4.1.171.11.70.7.3.3.2.4 integer read-write
This object indicates DNS Relay cache is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsStaticTableState 1.3.6.1.4.1.171.11.70.7.3.3.2.5 integer read-write
This object indicates DNS Relay static table is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsCtrlTable 1.3.6.1.4.1.171.11.70.7.3.3.2.6 no-access
This table display the current DNS relay static table.
                 swL3RelayDnsCtrlEntry 1.3.6.1.4.1.171.11.70.7.3.3.2.6.1 no-access
A list of information display the current DNS relay static table.
                     swL3RelayDnsCtrlDomainName 1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.1 displaystring read-only
The domain name of the entry.
                     swL3RelayDnsCtrlIpAddr 1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.2 ipaddress read-only
The IP address of the entry.
                     swL3RelayDnsCtrlState 1.3.6.1.4.1.171.11.70.7.3.3.2.6.1.3 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
     swL3RouteRedistriTable 1.3.6.1.4.1.171.11.70.7.3.5 no-access
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
         swL3RouteRedistriEntry 1.3.6.1.4.1.171.11.70.7.3.5.1 no-access
A list of information displaying the route redistribution table.
             swL3RouteRedistriSrcProtocol 1.3.6.1.4.1.171.11.70.7.3.5.1.1 integer read-only
Allows the selection of the protocol of the source device. Enumeration: 'local': 5, 'other': 1, 'static': 4.
             swL3RouteRedistriDstProtocol 1.3.6.1.4.1.171.11.70.7.3.5.1.2 integer read-only
Allows the selection of the protocol of the destination device. Enumeration: 'other': 1, 'rip': 2.
             swL3RouteRedistriMetric 1.3.6.1.4.1.171.11.70.7.3.5.1.4 integer read-only
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.
             swL3RouteRedistriRowStatus 1.3.6.1.4.1.171.11.70.7.3.5.1.5 rowstatus read-only
This object indicates the status of this entry.
     swL3RoutePreference 1.3.6.1.4.1.171.11.70.7.3.9
         swL3RoutePreferenceRIP 1.3.6.1.4.1.171.11.70.7.3.9.1 integer read-write
Used to configure the route preference of RIP.
         swL3RoutePreferenceStatic 1.3.6.1.4.1.171.11.70.7.3.9.3 integer read-write
Used to configure the route preference of Static.
         swL3RoutePreferenceLocal 1.3.6.1.4.1.171.11.70.7.3.9.4 integer read-only
Used to read the route preference of Local.
         swL3RoutePreferenceDefault 1.3.6.1.4.1.171.11.70.7.3.9.8 integer read-write
Used to configure the route preference of Default.