DGS-6600-STP-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DGS-6600-STP-EXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DGS-6600-ID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dgs6600StpExtMIB 1.3.6.1.4.1.171.10.120.100.2.2
The MIB module for managing MSTP.
     swMSTPGblMgmt 1.3.6.1.4.1.171.10.120.100.2.2.1
         swMSTPStpAdminState 1.3.6.1.4.1.171.10.120.100.2.2.1.1 integer read-write
This object indicates the spanning tree state of the bridge. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swMSTPStpVersion 1.3.6.1.4.1.171.10.120.100.2.2.1.2 integer read-write
The version of Spanning Tree Protocol the bridge is currently running. Enumeration: 'mstp': 2, 'stp': 0, 'rstp': 1.
         swMSTPStpMaxAge 1.3.6.1.4.1.171.10.120.100.2.2.1.3 integer read-write
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of StpForwardDelay and PortAdminHelloTime. MaxAge <= 2(ForwardDelay - 1);MaxAge >= 2(HelloTime + 1) The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
         swMSTPStpHelloTime 1.3.6.1.4.1.171.10.120.100.2.2.1.4 integer read-write
The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode.
         swMSTPStpForwardDelay 1.3.6.1.4.1.171.10.120.100.2.2.1.5 integer read-write
This value controls how long a port changes its spanning state from blocking to learning state and from learning to forwarding state. Note that the range for this parameter is related to MaxAge
         swMSTPStpMaxHops 1.3.6.1.4.1.171.10.120.100.2.2.1.6 integer read-write
This value applies to all spanning trees within an MST Region for which the bridge is the Regional Root.
         swMSTPStpTxHoldCount 1.3.6.1.4.1.171.10.120.100.2.2.1.7 integer read-write
The value used by the Port Transmit state machine to limit the maximum transmission rate.
         swMSTPStpForwardBPDU 1.3.6.1.4.1.171.10.120.100.2.2.1.8 integer read-write
The enabled/disabled status is used to forward BPDU to a non STP port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swMSTPStpLBD 1.3.6.1.4.1.171.10.120.100.2.2.1.9 integer read-write
The enabled/disabled status is used in Loop-back prevention. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swMSTPStpLBDRecoverTime 1.3.6.1.4.1.171.10.120.100.2.2.1.10 integer read-write
The period of time (in seconds) in which the STP module keeps checking the BPDU loop status. The valid range is 60 to 1000000. If this value is set from 1 to 59, you will get a 'bad value' return code. The value of zero is a special value that means to disable the auto-recovery mechanism for the LBD feature.
         swMSTPNniBPDUAddress 1.3.6.1.4.1.171.10.120.100.2.2.1.11 integer read-write
Specifies the BPDU MAC address of the NNI port in Q-in-Q status. Enumeration: 'dot1d': 1, 'dot1ad': 2.
     swMSTPCtrl 1.3.6.1.4.1.171.10.120.100.2.2.2
         swMSTPName 1.3.6.1.4.1.171.10.120.100.2.2.2.1 octet string read-write
The object indicates the name of the MST Configuration Identification.
         swMSTPRevisionLevel 1.3.6.1.4.1.171.10.120.100.2.2.2.2 integer read-write
The object indicates the revision level of the MST Configuration Identification.
         swMSTPInstanceCtrlTable 1.3.6.1.4.1.171.10.120.100.2.2.2.3 no-access
A table that contains MSTP instance information.
             swMSTPInstanceCtrlEntry 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1 no-access
A list of MSTP instance information.
                 swMSTPInstId 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.1 integer read-only
This object indicates the specific instance. An MSTP Instance ID (MSTID) of zero is used to identify the CIST.
                 swMSTPInstVlanRangeList1to64 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.2 octet string read-only
This object indicates the VLAN range (1-512) that belongs to the instance.
                 swMSTPInstVlanRangeList65to128 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.3 octet string read-only
This object indicates the VLAN range (513-1024) that belongs to the instance.
                 swMSTPInstVlanRangeList129to192 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.4 octet string read-only
This object indicates the VLAN range (1025-1536) that belongs to the instance.
                 swMSTPInstVlanRangeList193to256 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.5 octet string read-only
This object indicates the VLAN range(1537-2048) that belongs to the instance.
                 swMSTPInstVlanRangeList257to320 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.6 octet string read-only
This object indicates the VLAN range (2049-2560) that belongs to the instance.
                 swMSTPInstVlanRangeList321to384 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.7 octet string read-only
This object indicates the VLAN range (2561-3072) that belongs to the instance.
                 swMSTPInstVlanRangeList385to448 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.8 octet string read-only
This object indicates the VLAN range (3073-3584) that belongs to the instance.
                 swMSTPInstVlanRangeList449to512 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.9 octet string read-only
This object indicates the VLAN range (3585-4096) that belongs to the instance.
                 swMSTPInstType 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.10 integer read-only
This object indicates the type of instance. Enumeration: 'cist': 0, 'msti': 1.
                 swMSTPInstStatus 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.11 integer read-only
The instance state that could be enabled/disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swMSTPInstPriority 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.12 integer read-only
The priority of the instance. The priority must be divisible by 4096
                 swMSTPInstDesignatedRootBridge 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.13 bridgeid read-only
The bridge identifier of the CIST. For MST instance, this object is unused.
                 swMSTPInstExternalRootCost 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.14 integer read-only
The path cost between MST Regions from the transmitting bridge to the CIST Root. For MST instance this object is unused.
                 swMSTPInstRegionalRootBridge 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.15 bridgeid read-only
For CIST, Regional Root Identifier is the Bridge Identifier of the single bridge in a Region whose CIST Root Port is a Boundary Port, or the Bridge Identifier of the CIST Root if that is within the Region; For MSTI,MSTI Regional Root Identifier is the Bridge Identifier of the MSTI Regional Root for this particular MSTI in this MST Region; The Regional Root Bridge of this instance.
                 swMSTPInstInternalRootCost 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.16 integer read-only
For CIST, the internal path cost is the path cost to the CIST Regional Root; For MSTI, the internal path cost is the path cost to the MSTI Regional Root for this particular MSTI in this MST Region
                 swMSTPInstDesignatedBridge 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.17 bridgeid read-only
The Bridge Identifier for the transmitting bridge for this CIST or MSTI
                 swMSTPInstRootPort 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.18 integer read-only
The port number of the port which offers the lowest cost path from this bridge to the CIST or MSTI root bridge.
                 swMSTPInstMaxAge 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.19 integer read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                 swMSTPInstForwardDelay 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.20 integer read-only
This value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the port stays in each of the listening and learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
                 swMSTPInstLastTopologyChange 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.21 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
                 swMSTPInstTopChangesCount 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.22 counter read-only
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
                 swMSTPInstRemainHops 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.23 integer read-only
The root bridge in the instance for MSTI always sends a BPDU with a maximum hop count. When a switch receives this BPDU, it decrements the received maximum hop count by one and propagates this value as the remaining hop count in the BPDUs it generates.
                 swMSTPInstRowStatus 1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.24 rowstatus read-only
This object indicates the RowStatus of this entry.
         swMSTPPortTable 1.3.6.1.4.1.171.10.120.100.2.2.2.4 no-access
A table that contains port-specific information for the Spanning Tree Protocol.
             swMSTPPortEntry 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1 no-access
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
                 swMSTPPort 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.1 integer read-only
The port number of the port for this entry.
                 swMSTPPortAdminHelloTime 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.2 integer read-write
The amount of time between the transmission of BPDU by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second.
                 swMSTPPortOperHelloTime 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.3 integer read-only
The actual value of the hello time.
                 swMSTPSTPPortEnable 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.4 integer read-write
The enabled/disabled status of the port. Enumeration: 'disabled': 2, 'enabled': 1.
                 swMSTPPortExternalPathCost 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.5 integer read-write
The contribution of this port to the path cost of paths towards the CIST root which include this port.
                 swMSTPPortMigration 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.6 truthvalue read-write
When operating in MSTP mode or RSTP mode, writing TRUE(1) to this object forces this port to transmit MST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
                 swMSTPPortAdminEdgePort 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.7 integer read-write
The value of the Edge Port parameter. A value of TRUE indicates that this port should be assumed as an edge-port and a value of FALSE indicates that this port should be assumed as a non-edge-port Enumeration: 'false': 2, 'true': 1, 'auto': 3.
                 swMSTPPortOperEdgePort 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.8 integer read-only
It is the acutual value of the edge port status. Enumeration: 'false': 2, 'true': 1, 'auto': 3.
                 swMSTPPortAdminP2P 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.9 integer read-write
The point-to-point status of the LAN segment attached to this port. Enumeration: 'false': 1, 'true': 0, 'auto': 2.
                 swMSTPPortOperP2P 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.10 integer read-only
It is the actual value of the P2P status. Enumeration: 'false': 1, 'true': 0, 'auto': 2.
                 swMSTPPortLBD 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.11 integer read-write
The enabled/disabled status is used for Loop-back prevention attached to this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swMSTPPortBPDUFiltering 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.12 integer read-write
The enabled/disabled status is used for BPDU Filtering attached to this port.BPDU filtering allows the administrator to prevent the system from sending or even receiving BPDUs on specified ports. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swMSTPPortRestrictedRole 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.13 truthvalue read-write
If TRUE, causes the port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector.
                 swMSTPPortRestrictedTCN 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.14 truthvalue read-write
If TRUE, causes the port not to propagate received topology change notifications and topology changes to other Ports.
                 swMSTPPortOperFilterBpdu 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.15 integer read-only
It is the actual value of the hardware filter BPDU status. Enumeration: 'filtering': 2, 'receiving': 1.
                 swMSTPPortRecoverFilterBpdu 1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.16 truthvalue read-write
When operating in BPDU filtering mode, writing TRUE(1) to this object sets this port to receive BPDUs to the hardware. Any other operation on this object has no effect and it will always return FALSE(2) when read.
         swMSTPMstPortTable 1.3.6.1.4.1.171.10.120.100.2.2.2.5 no-access
A table that contains port-specific information for the MST Protocol.
             swMSTPMstPortEntry 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1 no-access
A list of information maintained by every port about the MST state for that port.
                 swMSTPMstPort 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.1 integer read-only
The port number of the port for this entry.
                 swMSTPMstPortInsID 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.2 integer read-only
This object indicates the MSTP Instance ID (MSTID).
                 swMSTPMstPortDesignatedBridge 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.3 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment on the corresponding Spanning Tree instance.
                 swMSTPMstPortInternalPathCost 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.4 integer read-write
This is the value of this port to the path cost of paths towards the MSTI root.
                 swMSTPMstPortPriority 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.5 integer read-write
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
                 swMSTPMstPortStatus 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.6 integer read-only
When the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the port status will be no-stp-enabled (7). If the port is in error disabled status, the port status will be err-disable(8) Enumeration: 'err-disabled': 8, 'no-stp-enabled': 7, 'discarding': 3, 'disabled': 2, 'broken': 6, 'other': 1, 'learning': 4, 'forwarding': 5.
                 swMSTPMstPortRole 1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.7 integer read-only
When the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the port role will be nonstp(5) Enumeration: 'loopback': 7, 'root': 3, 'alternate': 1, 'designated': 4, 'disable': 0, 'master': 5, 'nonstp': 6, 'backup': 2.
     swMSTPTraps 1.3.6.1.4.1.171.10.120.100.2.2.11
           swMSTPNotify 1.3.6.1.4.1.171.10.120.100.2.2.11.1
               swMSTPNotifyPrefix 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0
                   swMSTPPortLBDTrap 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.1
When STP port loopback detect is enabled, a trap will be generated.
                   swMSTPPortBackupTrap 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.2
When the STP port role goes to backup (defined in the STP standard), a trap will be generated.
                   swMSTPPortAlternateTrap 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.3
When the STP port role goes to alternate (defined in the STP standard), a trap will be generated.
                   swMSTPHwFilterStatusChange 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.4
This trap is sent when a BPDU hardware filter status port changes.
                   swMSTPRootRestrictedChange 1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.5
This trap is sent when a restricted role state port changes.