DES3852P-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3852P-L2MGMT-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SW3800PRIMGMT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.69.5.2
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
     swL2DevMgmt 1.3.6.1.4.1.171.11.69.5.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.69.5.2.1.1
             swDevInfoSystemUpTime 1.3.6.1.4.1.171.11.69.5.2.1.1.1 timeticks read-only
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in the units of seconds.
             swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.69.5.2.1.1.2 integer read-only
The number of ports within this switch. This value is the sum of the ports within this switch.
             swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.69.5.2.1.1.3 integer read-only
The number of ports in this switch connected to the segment or the end stations.
             swDevInfoConsoleInUse 1.3.6.1.4.1.171.11.69.5.2.1.1.4 integer read-only
The usage indication of the console system. Enumeration: 'other': 1, 'in-use': 2, 'not-in-use': 3.
             swDevInfoModuleType 1.3.6.1.4.1.171.11.69.5.2.1.1.5 octet string read-only
This object indicates the module type of this port.
             swDevInfoFrontPanelLedMode 1.3.6.1.4.1.171.11.69.5.2.1.1.6 integer read-only
This object indicates the mode of current device front panel LEDs . The front panel LED mode could be changed only by a push button on the device front panel . PortStatusMode : the LEDs respresent ports status. PoEStatusMode : the LEDs respresent POE status. Enumeration: 'portStatusMode': 1, 'poeStatusMode': 2.
             swDevInfoPowerTable 1.3.6.1.4.1.171.11.69.5.2.1.1.8 no-access
A list of the temperature.
                 swDevInfoPowerEntry 1.3.6.1.4.1.171.11.69.5.2.1.1.8.1 no-access
An entry for Power information.
                     swDevInfoPowerUnitIndex 1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.1 integer read-only
Indicates the ID of the unit in the System
                     swDevInfoPowerID 1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.2 integer read-only
Indicates ID of the power
                     swDevInfoPowerStatus 1.3.6.1.4.1.171.11.69.5.2.1.1.8.1.3 integer read-only
Indicates status of the power Enumeration: 'disconnect': 6, 'working': 3, 'overCurrent': 2, 'other': 0, 'connect': 5, 'fail': 4, 'lowVoltage': 1.
         swL2DevCtrl 1.3.6.1.4.1.171.11.69.5.2.1.2
             swL2DevCtrlStpState 1.3.6.1.4.1.171.11.69.5.2.1.2.1 integer read-write
This object can enable or disable the spanning tree algorithm during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.69.5.2.1.2.2 integer read-write
This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.69.5.2.1.2.3 integer read-write
This object can be enable or disable RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.69.5.2.1.2.4 integer read-write
If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.69.5.2.1.2.5 vlanid read-write
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.69.5.2.1.2.6 integer read-write
This object can enable or disable MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.69.5.2.1.2.7 integer read-write
This object indicates the history size of variation MAC in the address table. The default value is 1 .
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.69.5.2.1.2.8 integer read-write
This object indicates the time interval in seconds for triggering the MAC notify message.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.69.5.2.1.2.10
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.69.5.2.1.2.10.1 integer read-write
This object controls the Telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.69.5.2.1.2.10.2 integer read-write
This object can designate a TCP port. When Telnet is disabled this object isn't accessible.
         swL2DevAlarm 1.3.6.1.4.1.171.11.69.5.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.69.5.2.1.3.1 integer read-write
When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.69.5.2.1.3.2 integer read-write
This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device doesn't send the trap if this object value is set to disabled or other. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.69.5.2.1.3.3 integer read-write
This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device doesn't send the trap if this object value is set to disabled or other. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2VlanMgmt 1.3.6.1.4.1.171.11.69.5.2.3
         swL2VlanAdvertisementTable 1.3.6.1.4.1.171.11.69.5.2.3.1 no-access
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
             swL2VlanAdvertisementEntry 1.3.6.1.4.1.171.11.69.5.2.3.1.1 no-access
Advertisement state for each VLAN configured in the device.
                 swL2VlanIndex 1.3.6.1.4.1.171.11.69.5.2.3.1.1.1 integer read-only
The VLAN-ID or other identifier referring to this VLAN.
                 swL2VlanName 1.3.6.1.4.1.171.11.69.5.2.3.1.1.2 displaystring read-only
An administratively assigned string, which may be used to identify the VLAN.
                 swL2VlanAdvertiseState 1.3.6.1.4.1.171.11.69.5.2.3.1.1.3 integer read-write
This object indicates the advertised status of this VLAN entry. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2PortMgmt 1.3.6.1.4.1.171.11.69.5.2.4
         swL2PortInfoTable 1.3.6.1.4.1.171.11.69.5.2.4.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.69.5.2.4.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.69.5.2.4.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module).
                 swL2PortInfoUnitIndex 1.3.6.1.4.1.171.11.69.5.2.4.1.1.2 integer read-only
Indicates ID of the unit in the device
                 swL2PortInfoType 1.3.6.1.4.1.171.11.69.5.2.4.1.1.3 integer read-only
This object indicates the connector type of this port. Enumeration: 'none': 7, 'portType-1000Base-TX': 4, 'portType-1000Base-SX': 5, 'portType-100Base-FX': 2, 'portType-100Base-TX': 1, 'portType-100Base-FL': 3, 'portType-1000Base-LX': 6.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.69.5.2.4.1.1.4 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.69.5.2.4.1.1.5 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 3, 'full-1Gigabps': 8, 'full-100Mbps': 6, 'auto': 2, 'half-1Gigabps': 7, 'full-10Mbps': 4, 'other': 1, 'half-100Mbps': 5.
                 swL2PortInfoModuleType 1.3.6.1.4.1.171.11.69.5.2.4.1.1.6 integer read-only
This object indicates the module type of this port. Enumeration: 'none': 0, 'moduleType-BaseModule': 3, 'moduleType-COMBO': 1, 'moduleType-1000T': 2.
                 swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.69.5.2.4.1.1.7 integer read-only
This object indicates the blocking type of this port. Enumeration: 'unknow': 3, 'none': 0, 'lbd': 2, 'storm': 1.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.69.5.2.4.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.69.5.2.4.2.1 no-access
A list of control information for each port of the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.69.5.2.4.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.69.5.2.4.2.1.2 integer read-only
Indicates the ID of the unit in the device
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.69.5.2.4.2.1.3 integer read-write
This object decides whether the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.69.5.2.4.2.1.4 integer read-write
Choose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.69.5.2.4.2.1.5 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlLockState 1.3.6.1.4.1.171.11.69.5.2.4.2.1.6 integer read-write
This object decides whether the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.69.5.2.4.2.1.7 integer read-write
This object decides whether MAC notification is enabled or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.69.5.2.4.3 integer read-write
This object configure the switch's jumbo frame settings. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2PortInformationTable 1.3.6.1.4.1.171.11.69.5.2.4.4 no-access
A table that contains information about every port.
             swL2PortInformationEntry 1.3.6.1.4.1.171.11.69.5.2.4.4.1 no-access
A list of information for each port of the device.
                 swL2PortInformationPortIndex 1.3.6.1.4.1.171.11.69.5.2.4.4.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInformationMediumType 1.3.6.1.4.1.171.11.69.5.2.4.4.1.2 integer read-only
Indicates medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortInformationUnitID 1.3.6.1.4.1.171.11.69.5.2.4.4.1.3 integer read-only
Indicates ID of the unit in the system
                 swL2PortInformationType 1.3.6.1.4.1.171.11.69.5.2.4.4.1.4 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-1000Base-TX': 4, 'portType-1000Base-none-GBIC': 12, 'portType-10G-xfp-empty': 24, 'portType-SIO': 17, 'portType-100Base-TX': 1, 'portType-1000Base-none-MGBIC': 16, 'portType-10G-xenpak-1310nm': 19, 'portType-10G-xenpak-850nm': 20, 'portType-10G-xfp-1310nm': 22, 'portType-1000Base-TX-MGBIC': 15, 'portType-none': 25, 'portType-10G-xfp-850nm': 23, 'portType-10G': 18, 'portType-1000Base-SX-MGBIC': 13, 'portType-1000Base-TX-GBIC': 9, 'portType-10G-xenpak-empty': 21, 'portType-1000Base-SX': 5, 'portType-1000Base-LX-MGBIC': 14, 'portType-1000Base-LX': 6, 'portType-1000Base-1394': 10, 'portType-100Base-FX': 2, 'portType-1000Base-SX-GBIC': 7, 'portType-100Base-FL': 3, 'portType-1000Base-TX-GBIC-COMBO': 11, 'portType-1000Base-LX-GBIC': 8.
                 swL2PortInformationLinkStatus 1.3.6.1.4.1.171.11.69.5.2.4.4.1.5 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInformationNwayStatus 1.3.6.1.4.1.171.11.69.5.2.4.4.1.6 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 3, 'full-1Gigabps': 8, 'full-100Mbps': 6, 'half-1Gigabps': 7, 'full-10Mbps': 4, 'other': 0, 'full-10Gigabps': 9, 'link-down': 2, 'half-100Mbps': 5, 'empty': 1.
                 swL2PortInformationModuleType 1.3.6.1.4.1.171.11.69.5.2.4.4.1.7 integer read-only
This object indicates the module type of this port. Enumeration: 'moduleType-1394': 2, 'moduleType-COMBO': 1, 'moduleType-1P-MTRJ-LX': 13, 'moduleType-1000T': 3, 'moduleType-1P-MTRJ-SX': 11, 'moduleType-1P-GBIC-1P-STACK': 18, 'moduleType-2P-STACK': 19, 'moduleType-2P-MTRJ-LX': 14, 'moduleType-2P-100TX': 25, 'moduleType-1P-100FX': 21, 'moduleType-2P-SC-LX': 8, 'moduleType-MGBIC': 4, 'moduleType-1P-TX': 9, 'moduleType-2P-MTRJ-SX': 12, 'moduleType-2P-TX': 10, 'moduleType-1P-GBIC': 15, 'moduleType-1P-100FL': 23, 'moduleType-1P-SC-LX': 7, 'none': 0, 'moduleType-1P-SC-SX': 5, 'moduleType-2P-GBIC': 16, 'moduleType-2P-100FL': 24, 'moduleType-BaseModule-24PORT': 26, 'moduleType-2P-100FX-NEW': 22, 'moduleType-2P-SC-SX': 6, 'moduleType-1P-GBIC-1P-TX': 17, 'moduleType-2P-100FX': 20.
                 swL2PortInformationErrorDisabled 1.3.6.1.4.1.171.11.69.5.2.4.4.1.8 integer read-only
This object indicates the blocking type of this port. Enumeration: 'unknow': 3, 'none': 0, 'lbd': 2, 'storm': 1.
         swL2PortControlTable 1.3.6.1.4.1.171.11.69.5.2.4.5 no-access
A table that contains control information about every port.
             swL2PortControlEntry 1.3.6.1.4.1.171.11.69.5.2.4.5.1 no-access
A list of control information for each port of the device.
                 swL2PortControlPortIndex 1.3.6.1.4.1.171.11.69.5.2.4.5.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortControlMediumType 1.3.6.1.4.1.171.11.69.5.2.4.5.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortControlUnitIndex 1.3.6.1.4.1.171.11.69.5.2.4.5.1.3 integer read-only
Indicates ID of the unit in the device
                 swL2PortControlAdminState 1.3.6.1.4.1.171.11.69.5.2.4.5.1.4 integer read-write
This object decides if the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlNwayState 1.3.6.1.4.1.171.11.69.5.2.4.5.1.5 integer read-write
Choose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-disabled-1Gigabps-Full-master': 9, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'nway-disabled-1Gigabps-Full-slave': 10, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortControlFlowCtrlState 1.3.6.1.4.1.171.11.69.5.2.4.5.1.6 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlLearningState 1.3.6.1.4.1.171.11.69.5.2.4.5.1.7 integer read-write
This object decides whether the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlMACNotifyState 1.3.6.1.4.1.171.11.69.5.2.4.5.1.8 integer read-write
This object sets each port's MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlMulticastfilter 1.3.6.1.4.1.171.11.69.5.2.4.5.1.9 integer read-write
This object controls the multicast port filtering mode for a specified port. Enumeration: 'forward-unregistered-groups': 2, 'other': 0, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.69.5.2.6
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.69.5.2.6.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.69.5.2.6.1.1 no-access
A list of information contained in swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.69.5.2.6.1.1.1 integer read-only
Indicates the port.
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.69.5.2.6.1.1.2 integer read-write
Indicates the RX Rate(kbit/sec) of the specifed port. Value 0 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.69.5.2.6.1.1.3 integer read-write
Indicates the TX Rate(kbit/sec) of the specifed port. Value 0 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.69.5.2.6.1.1.4 integer read-only
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.69.5.2.6.1.1.5 integer read-only
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.69.5.2.6.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.69.5.2.6.2.1 no-access
A list of information contained in swL2QOSSchedulingTable.
                 swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.69.5.2.6.2.1.1 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.69.5.2.6.2.1.2 integer read-write
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.69.5.2.6.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.69.5.2.6.3.1 no-access
A list of information contained in swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.69.5.2.6.3.1.1 integer read-only
The 802.1p user priority .
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.69.5.2.6.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.69.5.2.6.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.69.5.2.6.4.1 no-access
A list of information contained in swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.69.5.2.6.4.1.1 integer read-only
Indicates the port number.
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.69.5.2.6.4.1.2 integer read-write
The priority value to assign to untagged packets received by the switch ports on the switch.
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.69.5.2.6.4.1.3 integer read-only
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.69.5.2.8
         swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.69.5.2.8.1 integer read-only
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
         swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.69.5.2.8.2 integer read-only
Current active number of entries in the trunk configuration table.
         swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.69.5.2.8.3 no-access
This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
             swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.69.5.2.8.3.1 no-access
A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
                 swL2TrunkIndex 1.3.6.1.4.1.171.11.69.5.2.8.3.1.1 integer read-only
The index of logical port trunk. The trunk group number depends on the existence of the unit and module.
                 swL2TrunkName 1.3.6.1.4.1.171.11.69.5.2.8.3.1.2 displaystring read-only
The name of logical port trunk.
                 swL2TrunkMasterPort 1.3.6.1.4.1.171.11.69.5.2.8.3.1.3 integer read-only
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swL2TrunkMember 1.3.6.1.4.1.171.11.69.5.2.8.3.1.4 portlist read-only
Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks.
                 swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.69.5.2.8.3.1.5 integer read-only
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
                 swL2TrunkType 1.3.6.1.4.1.171.11.69.5.2.8.3.1.6 integer read-only
This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . Enumeration: 'lacp': 3, 'other': 1, 'static': 2.
                 swL2TrunkState 1.3.6.1.4.1.171.11.69.5.2.8.3.1.7 rowstatus read-only
This object indicates the status of this entry.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.69.5.2.8.4 integer read-write
This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'ip-source': 5, 'mac-destination': 3, 'mac-source': 2, 'mac-source-dest': 4, 'ip-source-dest': 7, 'ip-destination': 6, 'other': 1.
     swL2MirrorMgmt 1.3.6.1.4.1.171.11.69.5.2.9
         swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.69.5.2.9.1 integer read-write
This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
         swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.69.5.2.9.2 portlist read-write
This represents the ingress of the source port packet to be sniffed.
         swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.69.5.2.9.3 portlist read-write
This represents the egress of the source port packet to be sniffed.
         swL2MirrorPortState 1.3.6.1.4.1.171.11.69.5.2.9.4 integer read-write
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disabled(2) - writing this value to the object will remove the corresponding entry from the table. enabled(3) - this entry will reside in the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2IGMPMgmt 1.3.6.1.4.1.171.11.69.5.2.10
           swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.69.5.2.10.1 integer read-only
Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
           swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.69.5.2.10.3 no-access
This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
               swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.69.5.2.10.3.1 no-access
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
                   swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.69.5.2.10.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
                   swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.69.5.2.10.3.1.2 integer read-write
The frequency at which the IGMP Host-Query packets are transmitted on this switch.
                   swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.69.5.2.10.3.1.3 integer read-write
The maximum query response time on this switch.
                   swL2IGMPRobustness 1.3.6.1.4.1.171.11.69.5.2.10.3.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                   swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.69.5.2.10.3.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                   swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.69.5.2.10.3.1.6 integer read-write
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer has expired. Please reference RFC2236-1997.
                   swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.69.5.2.10.3.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                   swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.69.5.2.10.3.1.8 integer read-write
When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                   swL2IGMPQueryState 1.3.6.1.4.1.171.11.69.5.2.10.3.1.9 integer read-write
This object decides if the IGMP query is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IGMPCurrentState 1.3.6.1.4.1.171.11.69.5.2.10.3.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                   swL2IGMPCtrlState 1.3.6.1.4.1.171.11.69.5.2.10.3.1.11 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.69.5.2.10.3.1.12 integer read-write
This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for this entry. enable(3) - IGMP fast-leave funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.69.5.2.10.4 no-access
The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device.
               swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.69.5.2.10.4.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled.
                   swL2IGMPInfoVid 1.3.6.1.4.1.171.11.69.5.2.10.4.1.1 integer read-only
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).
                   swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.69.5.2.10.4.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis.
                   swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.69.5.2.10.4.1.3 integer read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1.
           swL2IGMPInfoTable 1.3.6.1.4.1.171.11.69.5.2.10.5 no-access
The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between the entries of the IGMP Table and the Filtering Table inside the switch H/W address table, the Filtering Table entry will overwrite the colliding entry of the IGMP Table. See swL2FilterMgmt description also.
               swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.69.5.2.10.5.1 no-access
Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled.
                   swL2IGMPVid 1.3.6.1.4.1.171.11.69.5.2.10.5.1.1 integer read-only
This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network.
                   swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.69.5.2.10.5.1.2 ipaddress read-only
This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis.
                   swL2IGMPMacAddr 1.3.6.1.4.1.171.11.69.5.2.10.5.1.3 macaddress read-only
This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis.
                   swL2IGMPPortMap 1.3.6.1.4.1.171.11.69.5.2.10.5.1.4 portlist read-only
This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit has less then 32 port, the other ports don't care and just fill in zero.
                   swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.69.5.2.10.5.1.5 integer read-only
This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis.
           swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.69.5.2.10.6 no-access
The information of the IGMP snooping multicast VLAN table.
               swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.69.5.2.10.6.1 no-access
The entry of swL2IGMPMulticastVlanTable.
                   swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.69.5.2.10.6.1.1 integer read-only
This object indicates the VLAN id of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.69.5.2.10.6.1.2 snmpadminstring read-only
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.69.5.2.10.6.1.3 portlist read-only
This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.69.5.2.10.6.1.4 portlist read-only
This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.69.5.2.10.6.1.5 rowstatus read-only
This object indicates the status of this entry.
           swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.69.5.2.10.7 no-access
The information of the router port table.
               swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.69.5.2.10.7.1 no-access
The entry of swL2IGMPRouterPortTable.
                   swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.69.5.2.10.7.1.1 integer read-only
This object indicates the VLAN id of the router port entry.
                   swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.69.5.2.10.7.1.2 snmpadminstring read-only
This object indicates the VLAN name of the router port entry.
                   swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.69.5.2.10.7.1.3 portlist read-write
This object indicates the static portlist of the router port entry.
                   swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.69.5.2.10.7.1.4 portlist read-only
This object indicates the dynamic portlist of the router port entry.
                   swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.69.5.2.10.7.1.5 portlist read-write
This object indicates the forbidden portlist of the router port entry.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.69.5.2.13
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.69.5.2.13.1 no-access
This table specifies that the port can just forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.69.5.2.13.1.1 no-access
A list of information specifying the port with its traffic forward list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.69.5.2.13.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.69.5.2.13.1.1.2 portlist read-write
The port list that the specific port can forward traffic to.
           swL2BroadcastSegCtrl 1.3.6.1.4.1.171.11.69.5.2.13.2
               swL2BroadcastSegFilterPorts 1.3.6.1.4.1.171.11.69.5.2.13.2.1 portlist read-write
The port list that the specific port can filter broadcast packets from.
               swL2BroadcastSegARPForwardPorts 1.3.6.1.4.1.171.11.69.5.2.13.2.2 portlist read-write
The port list that the specific port can forward broadcast ARP packets to.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.69.5.2.14
           swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.69.5.2.14.1 no-access
The port security feature controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned addresses number reaches N, any incoming packet that has not learned a source address is discarded (e.g. dropped) and no more new addresses can be learned on this port.
               swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.69.5.2.14.1.1 no-access
A list of information contained in the swL2PortSecurityControlTable.
                   swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.69.5.2.14.1.1.1 integer read-only
Indicates the secured port to lock address learning.
                   swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.69.5.2.14.1.1.2 integer read-write
Indicates allowable number of addresses to be learned at this port.
                   swL2PortSecurityMode 1.3.6.1.4.1.171.11.69.5.2.14.1.1.3 integer read-write
Indicates the mode of locking address. In deleteOnTimeout (3) mode, the locked addresses can be aged out after the aging timer has expired. In this mode, when the locked address has aged out, the number of addresses that can be learned has to increase by one. In deleteOnReset (4) mode, the locked addresses are not aged out unless the system is restarted. This is to prevent port movement or intrusion. Enumeration: 'permanent': 2, 'other': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 4.
                   swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.69.5.2.14.1.1.4 integer read-write
Indicates the administration state of the locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
           swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.69.5.2.14.2 integer read-write
When enable (2) is selected, whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged by the system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.69.5.2.15
           swL2MgmtMIBTrapPrefix 1.3.6.1.4.1.171.11.69.5.2.15.0
               swL2macNotification 1.3.6.1.4.1.171.11.69.5.2.15.0.3
This trap indicate the MAC addresses variation in the address table .
               swL2porttypechgNotification 1.3.6.1.4.1.171.11.69.5.2.15.0.4
This trap indicates the port type change.
               swPowerStatusChg 1.3.6.1.4.1.171.11.69.5.2.15.0.5
Power Status change notification.
               swPowerFailure 1.3.6.1.4.1.171.11.69.5.2.15.0.6
Power Failure notification.
               swPowerRecover 1.3.6.1.4.1.171.11.69.5.2.15.0.7
Power Recover notification.
           swl2NotificationBidings 1.3.6.1.4.1.171.11.69.5.2.15.1
               swL2macNotifyInfo 1.3.6.1.4.1.171.11.69.5.2.15.1.1 octet string read-only
This object indicates information about the last time the system rebooted.
           swl2NotifyPortSecurity 1.3.6.1.4.1.171.11.69.5.2.15.2
               swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.69.5.2.15.2.1 macaddress no-access
This object indicates the MAC address that violated the port security configuration.
               swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.69.5.2.15.2.2
When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out