DES3016-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3016-L2MGMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SWPRIMGMT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.63.10.2
The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
     swL2DevMgmt 1.3.6.1.4.1.171.11.63.10.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.63.10.2.1.1
             swL2DevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.63.10.2.1.1.5 octet string read-only
This object is a set of system LED indications. The two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.
         swL2DevCtrl 1.3.6.1.4.1.171.11.63.10.2.1.2
             swL2DevCtrlSystemReboot 1.3.6.1.4.1.171.11.63.10.2.1.2.1 integer read-write
This object indicates the agent system reboot state. The agent always returns other(1) when this object is read. Enumeration: 'reboot-and-load-factory-default-config': 4, 'other': 1, 'reboot': 2, 'save-config-and-reboot': 3.
             swL2DevCtrlSystemIP 1.3.6.1.4.1.171.11.63.10.2.1.2.2 ipaddress read-write
This object indicates system ip.
             swL2DevCtrlSubnetMask 1.3.6.1.4.1.171.11.63.10.2.1.2.3 ipaddress read-write
This object indicates system subnet mask.
             swL2DevCtrlDefaultGateway 1.3.6.1.4.1.171.11.63.10.2.1.2.4 ipaddress read-write
This object indicates system default gateway.
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.63.10.2.1.2.5 vlanid read-write
This object controls which Vlan includes system ip. And the Vlan should have been created.
             swL2DevCtrlStpState 1.3.6.1.4.1.171.11.63.10.2.1.2.6 integer read-write
This object can be enabled or disabled spanning tree algorithm during runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.63.10.2.1.2.7 integer read-write
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled . Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.63.10.2.1.2.12 integer read-write
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlSnmpEnableAuthenTraps 1.3.6.1.4.1.171.11.63.10.2.1.2.13 integer read-write
Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.63.10.2.1.2.16 integer read-write
This object can be enabled or disabled RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIpAutoConfig 1.3.6.1.4.1.171.11.63.10.2.1.2.17 integer read-write
Indicates the status of automatically getting configuration from TFTP server on device Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2PortCtrlMulticastfilter 1.3.6.1.4.1.171.11.63.10.2.1.2.18 integer read-write
This object decide the multicast packets filtering mode on all port . Enumeration: 'forward-unregistered-groups': 2, 'filter-unregistered-groups': 3.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.63.10.2.1.2.19 integer read-write
This object can enabled or disabled MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.63.10.2.1.2.20 integer read-write
This object indicates the history size of variation MAC in address table. The default value is 1 .
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.63.10.2.1.2.21 integer read-write
This object indicates the time interval in second for trigger the MAC notify message.
             swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.63.10.2.1.2.22 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.63.10.2.1.2.23 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.63.10.2.1.2.24 integer read-write
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.63.10.2.1.2.25 vlanid read-write
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT_VLAN_ID of the system.
         swL2CPUutilization 1.3.6.1.4.1.171.11.63.10.2.1.3
             swL2CPUutilizationIn5sec 1.3.6.1.4.1.171.11.63.10.2.1.3.1 integer32 read-only
Time scale is 5 seconds.The value will be between 0%(idle) and 100% (very busy).
             swL2CPUutilizationIn1min 1.3.6.1.4.1.171.11.63.10.2.1.3.2 integer32 read-only
Time scale is 1 minute.The value will be between 0%(idle) and 100% (very busy).
             swL2CPUutilizationIn5min 1.3.6.1.4.1.171.11.63.10.2.1.3.3 integer32 read-only
Time scale is 5 minute.The value will be between 0%(idle) and 100% (very busy).
         swL2DevAlarm 1.3.6.1.4.1.171.11.63.10.2.1.4
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.63.10.2.1.4.3 integer read-write
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2PortMgmt 1.3.6.1.4.1.171.11.63.10.2.2
         swL2PortInfoTable 1.3.6.1.4.1.171.11.63.10.2.2.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.63.10.2.2.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.63.10.2.2.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.63.10.2.2.1.1.4 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.63.10.2.2.1.1.5 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps-backp': 4, 'half-100Mbps-backp': 8, 'full-100Mbps-none': 7, 'full-1Gigabps-none': 11, 'auto': 1, 'full-10Mbps-8023x': 2, 'half-100Mbps-none': 9, 'full-100Mbps-8023x': 6, 'half-1Gigabps-none': 13, 'full-10Mbps-none': 3, 'half-1Gigabps-backp': 12, 'half-10Mbps-none': 5, 'full-1Gigabps-8023x': 10.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.63.10.2.2.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.63.10.2.2.2.1 no-access
A list of control information for each port of the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.63.10.2.2.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.63.10.2.2.2.1.2 integer read-write
This object decide the port enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.63.10.2.2.2.1.3 integer read-write
Chose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-1Gigabps-Full': 7, 'nway-disabled-10Mbps-Full': 3, 'nway-disabled-100Mbps-Full': 5, 'nway-auto': 1, 'nway-disabled-10Mbps-Half': 2, 'nway-disabled-100Mbps-Half': 4.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.63.10.2.2.2.1.4 integer read-write
Set flow control function as enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlDescription 1.3.6.1.4.1.171.11.63.10.2.2.2.1.5 displaystring read-write
The object describe the ports in text.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.63.10.2.2.2.1.7 integer read-write
This object set each poet MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.63.10.2.2.2.1.10 integer read-write
This object controls the MDIX state of a specified port. Enumeration: 'auto': 1, 'cross': 3, 'normal': 2.
         swL2PortErrTable 1.3.6.1.4.1.171.11.63.10.2.2.3 no-access
A table that contains information about Err port.
             swL2PortErrEntry 1.3.6.1.4.1.171.11.63.10.2.2.3.1 no-access
A list of information for err port of the device.
                 swL2PortErrPortIndex 1.3.6.1.4.1.171.11.63.10.2.2.3.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortErrPortState 1.3.6.1.4.1.171.11.63.10.2.2.3.1.2 integer read-only
This object decide the portstate enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                 swL2PortErrPortStatus 1.3.6.1.4.1.171.11.63.10.2.2.3.1.3 integer read-only
This object decide the PortStatus whether err-disabled. Enumeration: 'other': 1, 'err-disabled': 2.
                 swL2PortErrPortReason 1.3.6.1.4.1.171.11.63.10.2.2.3.1.4 integer read-only
This object decide the PortStatus STP LBD or Storm control. Enumeration: 'stp-lbd': 1, 'storm-control': 2.
                 swL2PortErrDescription 1.3.6.1.4.1.171.11.63.10.2.2.3.1.5 displaystring read-only
The object describe the ports in text.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.63.10.2.3
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.63.10.2.3.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.63.10.2.3.1.1 no-access
A list of information contained in swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.63.10.2.3.1.1.1 integer read-only
Indicates the port .
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.63.10.2.3.1.1.2 integer read-write
Indicates RX Rate(Mbit/sec) of the specifed port.Value 1024000 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.63.10.2.3.1.1.3 integer read-write
Indicates TX Rate(Mbit/sec) of the specifed port.Value 1024000 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.63.10.2.3.1.1.4 integer read-only
The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.63.10.2.3.1.1.5 integer read-only
The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.63.10.2.3.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.63.10.2.3.2.1 no-access
A list of information contained in swL2QOSSchedulingTable.
                 swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.63.10.2.3.2.1.1 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxWeight 1.3.6.1.4.1.171.11.63.10.2.3.2.1.4 integer read-write
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.63.10.2.3.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.63.10.2.3.3.1 no-access
A list of information contained in swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.63.10.2.3.3.1.1 integer read-only
The 802.1p user priority .
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.63.10.2.3.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.63.10.2.3.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.63.10.2.3.4.1 no-access
A list of information contained in swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.63.10.2.3.4.1.1 integer read-only
Indicates the port number .
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.63.10.2.3.4.1.2 integer read-write
The priority value to assign to untagged packets received by the switch ports on the switch..
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.63.10.2.3.4.1.3 integer read-only
The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
         swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.63.10.2.3.5 integer read-write
This object can control QOS scheduling Mechanism. Enumeration: 'weightfair': 2, 'strict': 1, 'none': 3.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.63.10.2.4
         swPortTrunkMaxEntries 1.3.6.1.4.1.171.11.63.10.2.4.1 integer32 read-only
The max entries of swPortTrunkTable
         swPortTrunkMaxPortMembers 1.3.6.1.4.1.171.11.63.10.2.4.2 integer32 read-only
The max number of ports allowed in a trunk.
         swPortTrunkTable 1.3.6.1.4.1.171.11.63.10.2.4.3 no-access
This table specifies the port membership for each logical link.
             swPortTrunkEntry 1.3.6.1.4.1.171.11.63.10.2.4.3.1 no-access
A list of information specifies which ports group form a single logical link.
                 swPortTrunkIndex 1.3.6.1.4.1.171.11.63.10.2.4.3.1.1 integer32 read-only
The index of logical port trunk.
                 swPortTrunkMasterPort 1.3.6.1.4.1.171.11.63.10.2.4.3.1.2 integer32 read-only
The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swPortTrunkPortList 1.3.6.1.4.1.171.11.63.10.2.4.3.1.3 portlist read-only
Indicate member ports of a logical trunk.
                 swPortTrunkType 1.3.6.1.4.1.171.11.63.10.2.4.3.1.4 integer read-only
This object indicates the type of this entry. Enumeration: 'lacp': 2, 'static': 1.
                 swPortTrunkActivePort 1.3.6.1.4.1.171.11.63.10.2.4.3.1.5 portlist read-only
This object indicates the active ports of this entry.
                 swPortTrunkState 1.3.6.1.4.1.171.11.63.10.2.4.3.1.6 rowstatus read-only
This object indicates the status of this entry. when the state is CreatAndGo(4),the type of trunk is static(1); when the state is CreatAndWait(5),the type of trunk is lacp(2).
                 swPortTrunkFloodingPort 1.3.6.1.4.1.171.11.63.10.2.4.3.1.7 integer32 read-only
The flooding port of every trunk.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.63.10.2.4.4 integer read-write
This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'other': 1, 'mac-source-dest': 4, 'mac-source': 2, 'mac-destination': 3.
         swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.63.10.2.4.5 no-access
This table specifys which ports group a set of ports(up to 8) into a single logical link.
             swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.63.10.2.4.5.1 no-access
A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
                 swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.63.10.2.4.5.1.1 integer read-only
The index of logical port lacp.
                 swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.63.10.2.4.5.1.2 integer read-write
The state of logical port lacp. Enumeration: 'active': 1, 'passive': 2.
         swL2TrunkVLANTable 1.3.6.1.4.1.171.11.63.10.2.4.6 no-access
This table is used to manage the VLAN trunking feature of the device.
             swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.63.10.2.4.6.1 no-access
This object is used to configure the VLAN trunking settings for each port.
                 swL2TrunkVLANPort 1.3.6.1.4.1.171.11.63.10.2.4.6.1.1 integer read-only
This object indicates the port being configured.
                 swL2TrunkVLANState 1.3.6.1.4.1.171.11.63.10.2.4.6.1.2 integer read-write
The state of the logical port LACP. Enumeration: 'disabled': 2, 'enabled': 1.
     swPortMirrorPackage 1.3.6.1.4.1.171.11.63.10.2.6
         swPortMirrorRxPortList 1.3.6.1.4.1.171.11.63.10.2.6.2 portlist read-write
This object indicates the Rx port list of ports to be sniffed.
         swPortMirrorTxPortList 1.3.6.1.4.1.171.11.63.10.2.6.3 portlist read-write
This object indicates the Tx port list of ports to be sniffed.
         swPortMirrorTargetPort 1.3.6.1.4.1.171.11.63.10.2.6.4 integer32 read-write
This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
         swPortMirrorState 1.3.6.1.4.1.171.11.63.10.2.6.5 integer read-write
This object indicates the status of this entry. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swIGMPPackage 1.3.6.1.4.1.171.11.63.10.2.7
         swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.63.10.2.7.1 integer read-only
Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable).
         swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.63.10.2.7.2 integer read-only
Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
         swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.63.10.2.7.3 no-access
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
             swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.63.10.2.7.3.1 no-access
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
                 swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.63.10.2.7.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
                 swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.63.10.2.7.3.1.2 integer read-write
The frequency at which IGMP Host-Query packets are transmitted on this switch.
                 swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.63.10.2.7.3.1.3 integer read-write
The maximum query response time on this switch.
                 swL2IGMPRobustness 1.3.6.1.4.1.171.11.63.10.2.7.3.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                 swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.63.10.2.7.3.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                 swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.63.10.2.7.3.1.6 integer read-write
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997.
                 swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.63.10.2.7.3.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                 swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.63.10.2.7.3.1.8 integer read-write
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                 swL2IGMPQueryState 1.3.6.1.4.1.171.11.63.10.2.7.3.1.9 integer read-write
This object decide the IGMP query enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2IGMPCurrentState 1.3.6.1.4.1.171.11.63.10.2.7.3.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                 swL2IGMPCtrlState 1.3.6.1.4.1.171.11.63.10.2.7.3.1.11 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                 swL2IGMPFastLeave 1.3.6.1.4.1.171.11.63.10.2.7.3.1.12 integer read-write
Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
         swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.63.10.2.7.4 no-access
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
             swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.63.10.2.7.4.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
                 swL2IGMPInfoVid 1.3.6.1.4.1.171.11.63.10.2.7.4.1.1 integer read-only
This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
                 swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.63.10.2.7.4.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
                 swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.63.10.2.7.4.1.3 integer read-only
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
         swL2IGMPInfoTable 1.3.6.1.4.1.171.11.63.10.2.7.5 no-access
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
             swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.63.10.2.7.5.1 no-access
Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
                 swL2IGMPVid 1.3.6.1.4.1.171.11.63.10.2.7.5.1.1 integer read-only
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
                 swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.63.10.2.7.5.1.2 ipaddress read-only
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
                 swL2IGMPMacAddr 1.3.6.1.4.1.171.11.63.10.2.7.5.1.3 macaddress read-only
This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.
                 swL2IGMPPortMap 1.3.6.1.4.1.171.11.63.10.2.7.5.1.4 portlist read-only
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero.
                 swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.63.10.2.7.5.1.5 integer read-only
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
         swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.63.10.2.7.6 no-access
The information of the router port table.
             swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.63.10.2.7.6.1 no-access
The entry of swL2IGMPRouterPortTable.
                 swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.63.10.2.7.6.1.1 integer read-only
This object indicates the VLAN ID of the router port entry.
                 swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.63.10.2.7.6.1.2 displaystring read-only
This object indicates the VLAN name of the router port entry.
                 swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.63.10.2.7.6.1.3 portlist read-write
This object indicates the static portlist of the router port entry.
                 swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.63.10.2.7.6.1.4 portlist read-only
This object indicates the dynamic portlist of the router port entry.
                 swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.63.10.2.7.6.1.5 portlist read-write
This object indicate the forbidden portlist of the router port entry.
         swL2IGMPAccessAuthTable 1.3.6.1.4.1.171.11.63.10.2.7.7 no-access
This table is used to manage the IGMP Access Authentication configurations of the device.
             swL2IGMPAccessAuthEntry 1.3.6.1.4.1.171.11.63.10.2.7.7.1 no-access
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
                 swL2IGMPAccessAuthPort 1.3.6.1.4.1.171.11.63.10.2.7.7.1.1 integer read-only
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
                 swL2IGMPAccessAuthState 1.3.6.1.4.1.171.11.63.10.2.7.7.1.2 integer read-write
This object denotes the status of IGMP Access Authentication of the port. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
     swL2TrafficMgmt 1.3.6.1.4.1.171.11.63.10.2.11
           swL2TrafficCtrlTable 1.3.6.1.4.1.171.11.63.10.2.11.1 no-access
This table specifys the storm traffic control configuration.
               swL2TrafficCtrlEntry 1.3.6.1.4.1.171.11.63.10.2.11.1.1 no-access
A list of information specifies the storm traffic control configuration.
                   swL2TrafficCtrlGroupIndex 1.3.6.1.4.1.171.11.63.10.2.11.1.1.1 integer read-only
The index of logical port trunk. The trunk group number depend on the existence of unit and module.
                   swL2TrafficCtrlUnitIndex 1.3.6.1.4.1.171.11.63.10.2.11.1.1.2 integer read-only
Indicates ID of the unit in the device
                   swL2TrafficCtrlBMStromthreshold 1.3.6.1.4.1.171.11.63.10.2.11.1.1.3 integer read-write
This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.
                   swL2TrafficCtrlBcastStromCtrl 1.3.6.1.4.1.171.11.63.10.2.11.1.1.4 integer read-write
This object indicates broadcast storm control function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2TrafficCtrlMcastStromCtrl 1.3.6.1.4.1.171.11.63.10.2.11.1.1.5 integer read-write
This object indicates multicast storm control function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2TrafficCtrlUcastStromCtrl 1.3.6.1.4.1.171.11.63.10.2.11.1.1.6 integer read-write
This object indicates destination lookup fail function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.63.10.2.12
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.63.10.2.12.1 no-access
This table specifys the port just can forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.63.10.2.12.1.1 no-access
A list of information specifies the port with its traffic forward list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.63.10.2.12.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.63.10.2.12.1.1.2 portlist read-write
The port list that the specific port can forward traffic.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.63.10.2.15
           swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.63.10.2.15.1 no-access
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
               swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.63.10.2.15.1.1 no-access
A list of information contained in swL2PortSecurityControlTable.
                   swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.63.10.2.15.1.1.1 integer read-only
Indicates the secured port to lock address learning.
                   swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.63.10.2.15.1.1.2 integer read-write
Indicates allowable number of addresses to be learned at this port.
                   swL2PortSecurityMode 1.3.6.1.4.1.171.11.63.10.2.15.1.1.3 integer read-write
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In deleteOnReset(4) mode - never age out the locked addresses unless restart the system to prevent from port movement or intrusion. Enumeration: 'permanent': 2, 'deleteOnTimeout': 3, 'other': 1, 'deleteOnReset': 4.
                   swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.63.10.2.15.1.1.4 integer read-write
Indicates administration state of locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
                   swL2PortSecurityEntryClearCtrl 1.3.6.1.4.1.171.11.63.10.2.15.1.1.5 integer read-write
Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'. Enumeration: 'start': 2, 'other': 1.
           swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.63.10.2.15.2 integer read-write
when enable(2),whenever there's a new MAC that violates the pre-defined port security configuration, trap will be sent out and the relevant information will be logged in system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
     swL2StpMgmt 1.3.6.1.4.1.171.11.63.10.2.16
           swL2StpForwardBPDU 1.3.6.1.4.1.171.11.63.10.2.16.1 integer read-write
Indicates whether flooding BPDU packets when STP is disabled on device Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2StpPortTable 1.3.6.1.4.1.171.11.63.10.2.16.4 no-access
A table that contains port-specific information for the Spanning Tree Protocol.
               swL2StpPortEntry 1.3.6.1.4.1.171.11.63.10.2.16.4.1 no-access
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
                   swL2StpPort 1.3.6.1.4.1.171.11.63.10.2.16.4.1.1 integer read-only
The port number of the port for this entry.
                   swL2StpPortStatus 1.3.6.1.4.1.171.11.63.10.2.16.4.1.3 integer read-only
When the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the the port status will be no-stp-enabled(7). If the port is in error disabled status, the port status will be err-disabled(8) Enumeration: 'err-disabled': 8, 'discarding': 3, 'disabled': 2, 'broken': 6, 'no-stp-enabled': 7, 'learning': 4, 'forwarding': 5, 'other': 1.
                   swL2StpPortRole 1.3.6.1.4.1.171.11.63.10.2.16.4.1.4 integer read-only
When the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the the port role will be nonstp(7). If the port is in loop-back status, the port role will be loopback(8) Enumeration: 'loopback': 7, 'root': 4, 'alternate': 2, 'designated': 5, 'disabled': 1, 'nonStp': 6, 'backup': 3.
                   swL2StpPortFBPDU 1.3.6.1.4.1.171.11.63.10.2.16.4.1.5 integer read-write
The enabled/disabled status is used to BPDU Filtering attached to this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2StpPortLinkState 1.3.6.1.4.1.171.11.63.10.2.16.4.1.6 integer read-only
This object indicates the stp port speed and duplex mode. Enumeration: 'half-10Mbps-backp': 3, 'half-100Mbps-backp': 7, 'full-100Mbps-none': 8, 'full-1000Mbps-8023x': 13, 'full-10Mbps-8023x': 5, 'full-1000Mbps-none': 12, 'half-100Mbps-none': 6, 'full-100Mbps-8023x': 9, 'half-1000Mbps-none': 10, 'full-10Mbps-none': 4, 'half-10Mbps-none': 2, 'link-down': 1, 'full-1000Mbps-backp': 11.
                   swL2StpPortProtocolMigration 1.3.6.1.4.1.171.11.63.10.2.16.4.1.7 truthvalue read-write
When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
                   swL2StpPortAdminEdgePort 1.3.6.1.4.1.171.11.63.10.2.16.4.1.8 integer read-write
The administrative value of the Edge Port parameter. A value of TRUE(0) indicates that this port should be assumed as an edge-port and a value of FALSE(1) indicates that this port should be assumed as a non-edge-port. Enumeration: 'forceTrue': 0, 'forceFalse': 1, 'auto': 2.
                   swL2StpPortOperEdgePort 1.3.6.1.4.1.171.11.63.10.2.16.4.1.9 truthvalue read-only
The operational value of the Edge Port parameter. The object is initialized to the value of swL2StpPortAdminEdgePort and is set FALSE on reception of a BPDU.
                   swL2StpPortAdminPointToPoint 1.3.6.1.4.1.171.11.63.10.2.16.4.1.10 integer read-write
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'forceTrue': 0, 'forceFalse': 1, 'auto': 2.
                   swL2StpPortOperPointToPoint 1.3.6.1.4.1.171.11.63.10.2.16.4.1.11 truthvalue read-only
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the swL2StpPortAdminPointToPoint object.
                   swL2StpPortAdminPathCost 1.3.6.1.4.1.171.11.63.10.2.16.4.1.12 unsigned32 read-write
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object swL2StpPortPathCost, which returns the operational value of the path cost. Issue No.: 3250R2-077 As USE_RSTP is 1:enabled, swL2StpPortPathCost is forced to be read-only. configuration via swL2StpPortAdminPathCost. According 802.1w, value range of swL2StpPortAdminPathCost would be expanded. the former value range is (0..65535), the new is (0..200000000).
                   swL2StpPortPriority 1.3.6.1.4.1.171.11.63.10.2.16.4.1.13 integer read-write
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of swL2StpPort.
                   swL2STPPortState 1.3.6.1.4.1.171.11.63.10.2.16.4.1.14 integer read-write
The enabled/disabled status is usedoop-back prevention attached to this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2StpPortRestrictedRole 1.3.6.1.4.1.171.11.63.10.2.16.4.1.15 truthvalue read-write
If TRUE causes the port not to be selected as Root Port, even it has the best spanning tree priotiry vector.
                   swL2StpPortRestrictedTCN 1.3.6.1.4.1.171.11.63.10.2.16.4.1.16 truthvalue read-write
If TRUE causes the port not to propagate received topology change notifications and topology changes to other Ports.
     swL2CosMgmt 1.3.6.1.4.1.171.11.63.10.2.17
           swL2CosPriorityCtrl 1.3.6.1.4.1.171.11.63.10.2.17.3
               swL2CosPriorityTable 1.3.6.1.4.1.171.11.63.10.2.17.3.1 no-access
Used to show and config per port priority-based QoS features on the switch
                   swL2CosPriorityEntry 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1 no-access
A list of information contained in swL2CosPriorityTable.
                       swL2CosPriorityPort 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1.1 integer read-only
The port number of CoS Priority.
                       swL2CosPriorityPortPRI 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1.2 integer read-write
Indicates port_priority state for CoS. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                       swL2CosPriorityEtherPRI 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1.3 integer read-write
Enable Ethernet frame based priority. When set ether8021p(2), enable 802.1p QoS; When set macBase(3), enable MAC-based QoS; When set disable(1), disable Ethernet frame based priority. Enumeration: 'disable': 1, 'macBase': 3, 'ether8021p': 2.
                       swL2CosPriorityIpPRI 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1.4 integer read-write
Enable IP priority QoS. When set tos(2), enable TOS based QoS; When set dscp(3), enable DSCP based QoS; When set disable(1), disable IP priority QoS. Enumeration: 'tos': 2, 'disable': 1, 'dscp': 3.
                       swL2CosPriorityNone 1.3.6.1.4.1.171.11.63.10.2.17.3.1.1.5 integer read-write
when read,it always return invalid(2); when write valid(1),it disables all priority in this table. Enumeration: 'valid': 1, 'invalid': 2.
               swL2CosPortPRITable 1.3.6.1.4.1.171.11.63.10.2.17.3.2 no-access
Used to show port-to-class mappings and map specific port to one of the hardware queues available on the switch.
                   swL2CosPortPRIEntry 1.3.6.1.4.1.171.11.63.10.2.17.3.2.1 no-access
A list of information contained in swL2CosPortPRITable.
                       swL2CosPortPRIIndex 1.3.6.1.4.1.171.11.63.10.2.17.3.2.1.1 integer read-only
Indicates CoS Priority PortPRI.
                       swL2CosPortPRIClass 1.3.6.1.4.1.171.11.63.10.2.17.3.2.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, You must have administrator privileges. And you can set value only 0 or 3,you can't set value 1 or 2.
               swL2CosMacBasePRITable 1.3.6.1.4.1.171.11.63.10.2.17.3.3 no-access
Used to show MAC priority map to traffic class and map the destination MAC address in incoming packet to one of the hardware queues available on the switch.
                   swL2CosMacBasePRIEntry 1.3.6.1.4.1.171.11.63.10.2.17.3.3.1 no-access
A list of information contained in swL2CosMacBasePRITable.
                       swL2CosMacBasePRIIndex 1.3.6.1.4.1.171.11.63.10.2.17.3.3.1.1 macaddress read-only
Indicates CoS Priority MacBasePRI.
                       swL2CosMacBasePRIClass 1.3.6.1.4.1.171.11.63.10.2.17.3.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, You must have administrator privileges.
               swL2CosTosPRITable 1.3.6.1.4.1.171.11.63.10.2.17.3.4 no-access
Used to show TOS value to traffic class mapping and map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.
                   swL2CosTosPRIEntry 1.3.6.1.4.1.171.11.63.10.2.17.3.4.1 no-access
A list of information contained in swL2CosTosPRITable.
                       swL2CosTosPRIIndex 1.3.6.1.4.1.171.11.63.10.2.17.3.4.1.1 integer read-only
Indicates CoS Priority TosPRI.
                       swL2CosTosPRIClass 1.3.6.1.4.1.171.11.63.10.2.17.3.4.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, You must have administrator privileges.
               swL2CosDscpPRITable 1.3.6.1.4.1.171.11.63.10.2.17.3.5 no-access
Used to show DSCP value to traffic class mapping and map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.
                   swL2CosDscpPRIEntry 1.3.6.1.4.1.171.11.63.10.2.17.3.5.1 no-access
A list of information contained in swL2CosDscpPRITable.
                       swL2CosDscpPRIIndex 1.3.6.1.4.1.171.11.63.10.2.17.3.5.1.1 integer read-only
Indicates CoS Priority DscpPRI.
                       swL2CosDscpPRIClass 1.3.6.1.4.1.171.11.63.10.2.17.3.5.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, You must have administrator privileges.
     swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.63.10.2.18
           swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.63.10.2.18.1
               swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.63.10.2.18.1.1 integer read-write
This object indicates the loopback detection status for the system. Enumeration: 'disabled': 2, 'enabled': 1.
               swL2LoopDetectInterval 1.3.6.1.4.1.171.11.63.10.2.18.1.2 integer read-write
This object indicates the interval value, the range is from 1 to 32767 seconds.
               swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.63.10.2.18.1.3 integer read-write
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
           swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.63.10.2.18.2
               swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.63.10.2.18.2.1 no-access
The table specifies the loopback detection function specified by port.
                   swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.63.10.2.18.2.1.1 no-access
The table specifies the loopback detection function specified by port.
                       swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.63.10.2.18.2.1.1.1 integer read-only
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
                       swL2LoopDetectPortState 1.3.6.1.4.1.171.11.63.10.2.18.2.1.1.2 integer read-write
This object indicates the loopback detection function state on the port. Enumeration: 'disabled': 2, 'enabled': 1.
                       swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.63.10.2.18.2.1.1.4 integer read-only
This object indicates the port status. Enumeration: 'normal': 1, 'loop': 2, 'error': 3.
     swL2VLANMgmt 1.3.6.1.4.1.171.11.63.10.2.19
           swL2VlanTable 1.3.6.1.4.1.171.11.63.10.2.19.1 no-access
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
               swL2VlanEntry 1.3.6.1.4.1.171.11.63.10.2.19.1.1 no-access
Static information for a VLAN configured into the device by (local or network) management.
                   swL2VlanIndex 1.3.6.1.4.1.171.11.63.10.2.19.1.1.1 vlanid read-only
The VLAN ID of the VLAN to be created. The range is 1 - 4094.
                   swL2VlanName 1.3.6.1.4.1.171.11.63.10.2.19.1.1.2 displaystring read-only
The name of the VLAN to be displayed.
                   swL2VlanType 1.3.6.1.4.1.171.11.63.10.2.19.1.1.3 integer read-only
The type of the VLAN to be displayed. Enumeration: 'dynamic': 0, 'static': 1.
                   swL2VlanMemberPorts 1.3.6.1.4.1.171.11.63.10.2.19.1.1.4 portlist read-only
A range of member ports to the VLAN.
                   swL2VlanStaticPorts 1.3.6.1.4.1.171.11.63.10.2.19.1.1.5 portlist read-only
A range of static ports to the VLAN.
                   swL2VlanUntaggedPorts 1.3.6.1.4.1.171.11.63.10.2.19.1.1.6 portlist read-only
Specifies the additional ports as untagged.
                   swL2VlanTaggedPorts 1.3.6.1.4.1.171.11.63.10.2.19.1.1.7 portlist read-only
Specifies the additional ports as tagged.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.63.10.2.100
             swL2Notify 1.3.6.1.4.1.171.11.63.10.2.100.1
                 swL2NotifyPrefix 1.3.6.1.4.1.171.11.63.10.2.100.1.2
                     swL2NotifFirmware 1.3.6.1.4.1.171.11.63.10.2.100.1.2.0
                         swL2macNotification 1.3.6.1.4.1.171.11.63.10.2.100.1.2.0.1
This trap indicates the MAC addresses variation in address table .
                         swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.63.10.2.100.1.2.0.2
When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
                     swl2NotificationBidings 1.3.6.1.4.1.171.11.63.10.2.100.1.2.1
                         swL2macNotifyInfo 1.3.6.1.4.1.171.11.63.10.2.100.1.2.1.1 octet string read-only
This object indicates the last time reboot information.
                         swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.63.10.2.100.1.2.1.2 macaddress no-access
This object indicates the MAC address that violates the port security configuration.