DES2218-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES2218-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlink 1.3.6.1.4.1.171
         dlink_products 1.3.6.1.4.1.171.10
               dlink_Des2218Prod 1.3.6.1.4.1.171.10.7
                   dlink_Des2218ProdId 1.3.6.1.4.1.171.10.7.1
                   des2218SwHub 1.3.6.1.4.1.171.10.7.2
         dlink_mgmt 1.3.6.1.4.1.171.11
               agentConfigInfo 1.3.6.1.4.1.171.11.1
                   agentBasicInfo 1.3.6.1.4.1.171.11.1.1
                       agentRuntimeSwVersion 1.3.6.1.4.1.171.11.1.1.1 displaystring read-only
This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
                       agentPromFwVersion 1.3.6.1.4.1.171.11.1.1.2 displaystring read-only
This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'
                       agentHwRevision 1.3.6.1.4.1.171.11.1.1.3 displaystring read-only
This is a textual description of the hardware revision. The display string should look like 'Rev. A1'
                       agentMgmtProtocolCapability 1.3.6.1.4.1.171.11.1.1.4 integer read-only
The network management protocol(s) supported by this agent. Enumeration: 'snmp-ip-ipx': 4, 'other': 1, 'snmp-ip': 2, 'snmp-ipx': 3.
                       agentMibCapabilityTable 1.3.6.1.4.1.171.11.1.1.5 no-access
A list of MIB capability entries supported by this agent.
                           agentMibCapabilityEntry 1.3.6.1.4.1.171.11.1.1.5.1 no-access
A MIB capability entry contains objects describing a particular MIB supported by this agent.
                               agentMibCapabilityIndex 1.3.6.1.4.1.171.11.1.1.5.1.1 integer read-only
A list of agentMibCapabilityDescr entries.
                               agentMibCapabilityDescr 1.3.6.1.4.1.171.11.1.1.5.1.2 displaystring read-only
The name of the MIB supported by the agent.
                               agentMibCapabilityVersion 1.3.6.1.4.1.171.11.1.1.5.1.3 integer read-only
The version of the MIB specified in this entry.
                               agentMibCapabilityType 1.3.6.1.4.1.171.11.1.1.5.1.4 integer read-only
The type of the MIB specified in this entry. Enumeration: 'other': 1, 'proprietary': 3, 'experiment': 4, 'standard': 2.
                   agentBasicConfig 1.3.6.1.4.1.171.11.1.2
                       agentSwUpdateMode 1.3.6.1.4.1.171.11.1.2.1 integer read-write
The download media used by the system to download the runtime software. Enumeration: 'out-of-band-load': 3, 'other': 1, 'network-load': 2.
                       agentSwUpdateCtrl 1.3.6.1.4.1.171.11.1.2.2 integer read-write
Current status of software download control. The setting is effective the next time you reset or power on the hub. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                       agentBootFile 1.3.6.1.4.1.171.11.1.2.3 displaystring read-write
The name of the file to be downloaded from the TFTP server when software update is enabled.
                       agentSystemReset 1.3.6.1.4.1.171.11.1.2.4 integer read-write
This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The agent always returns no-reset(3) when this object is read. Enumeration: 'reset': 2, 'other': 1, 'no-reset': 3.
                       agentRs232PortConfig 1.3.6.1.4.1.171.11.1.2.5 integer read-write
The current setting of RS-232C port. The RS-232C port can be configured as the console port or used for out-of-band connection. Enumeration: 'other': 1, 'console': 2, 'out-of-band': 3.
                       agentOutOfBandBaudRateConfig 1.3.6.1.4.1.171.11.1.2.6 integer read-write
The baud rate setting for out of band connection. The baud rate for the console interface is always 9600. Enumeration: 'baudRate-2400': 2, 'baudRate-38400': 5, 'other': 1, 'baudRate-9600': 3, 'baudRate-19200': 4.
                       agentOutOfBandDialNumber 1.3.6.1.4.1.171.11.1.2.7 displaystring read-write
The dial out phone number for out of band to establish a connection. This entry is used for reference only.
                   agentIpProtoConfig 1.3.6.1.4.1.171.11.1.3
                       agentIpNumOfIf 1.3.6.1.4.1.171.11.1.3.1 integer read-only
The total number of IP interfaces supported by this agent.
                       agentIpIfTable 1.3.6.1.4.1.171.11.1.3.2 no-access
A list of IP interface entries supported by the agent.
                           agentIpIfEntry 1.3.6.1.4.1.171.11.1.3.2.1 no-access
An agentIPIfEntry contains information about a particular IP interface.
                               agentIpIfIndex 1.3.6.1.4.1.171.11.1.3.2.1.1 integer read-only
This object uniquely identifies the IP interface number in agentIpIfTable. This value should never greater than agentIpNumOfIf
                               agentIpIfAddress 1.3.6.1.4.1.171.11.1.3.2.1.2 ipaddress read-write
The IP address of the interface.
                               agentIpIfNetMask 1.3.6.1.4.1.171.11.1.3.2.1.3 ipaddress read-write
The IP net mask for this interface.
                               agentIpIfDefaultRouter 1.3.6.1.4.1.171.11.1.3.2.1.4 ipaddress read-write
The default gateway for this IP interface.
                               agentIpIfMacAddr 1.3.6.1.4.1.171.11.1.3.2.1.5 physaddress read-only
The MAC address of this IP interface. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                               agentIpIfType 1.3.6.1.4.1.171.11.1.3.2.1.6 integer read-only
The physical layer interface of the IP interface. Enumeration: 'ethernet-csmacd': 6, 'other': 1, 'slip': 28.
                       agentIpBootServerAddr 1.3.6.1.4.1.171.11.1.3.3 ipaddress read-write
The IP Address of Boot Server.
                       agentIpBootProtocol 1.3.6.1.4.1.171.11.1.3.4 integer read-write
The software download protocol used for software update. Enumeration: 'bootp-tftp': 2, 'tftp': 3, 'other': 1.
                       agentIpGetIpFromBootpServer 1.3.6.1.4.1.171.11.1.3.5 integer read-write
This object indicates whether the agent get its system IP address from BootP server at start up. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                       agentIpUnauthAddr 1.3.6.1.4.1.171.11.1.3.6 ipaddress read-only
The IP address of an unauthorized SNMP packet.
                       agentIpUnauthComm 1.3.6.1.4.1.171.11.1.3.7 displaystring read-only
The community string of an unauthorized SNMP packet.
                       agentIpLastBootServerAddr 1.3.6.1.4.1.171.11.1.3.8 ipaddress read-only
The last IP address used as Boot server IP address.
                       agentIpLastIpAddr 1.3.6.1.4.1.171.11.1.3.9 ipaddress read-only
The last IP address used as the agent system IP address.
                       agentIpTrapManagerTable 1.3.6.1.4.1.171.11.1.3.10 no-access
A list of trap manager entries to which to send SNMP traps .
                             agentIpTrapManagerEntry 1.3.6.1.4.1.171.11.1.3.10.1 no-access
This entry contains the particular trap manager settings.
                                 agentIpTrapManagerIpAddr 1.3.6.1.4.1.171.11.1.3.10.1.1 ipaddress read-only
The IP address to receive SNMP traps from this device.
                                 agentIpTrapManagerComm 1.3.6.1.4.1.171.11.1.3.10.1.2 displaystring read-write
The community string of the SNMP trap packet sent to the trap manager.
                                 agentIpTrapManagerStatus 1.3.6.1.4.1.171.11.1.3.10.1.3 integer read-write
This object indicates whether or not the trap should be send to this trap manager. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
               des2218series 1.3.6.1.4.1.171.11.7
                   des2218MIB 1.3.6.1.4.1.171.11.7.1
                       swDevicePackage 1.3.6.1.4.1.171.11.7.1.1
                           swDeviceInfo 1.3.6.1.4.1.171.11.7.1.1.1
                               swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.7.1.1.1.1 integer read-only
The number of ports within this switch hub. This value is the sum of the ports of each group within this switch hub.
                               swDevInfoNumOfPortOnUse 1.3.6.1.4.1.171.11.7.1.1.1.2 integer read-only
The number of ports in this switch hub connected to the segment or end stations.
                               swDevInfoDesc 1.3.6.1.4.1.171.11.7.1.1.1.3 displaystring read-only
A textual description of this switch hub.
                               swDevInfoPortType 1.3.6.1.4.1.171.11.7.1.1.1.4 integer read-only
The connector type of this port. Enumeration: 'portType-AUI': 3, 'portType-Option-module-100Bridge': 7, 'portType-Option-module-RAS': 6, 'portType-Fiber': 4, 'other': 1, 'portType-UTP': 2, 'portType-BNC': 5.
                               swDevInfoHwRev 1.3.6.1.4.1.171.11.7.1.1.1.5 displaystring read-only
A textual description of the hardware revision of this switch bub.
                               swDevInfoSystemUpTime 1.3.6.1.4.1.171.11.7.1.1.1.6 timeticks read-only
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re- initialization, then this object contains a zero value.
                               swDevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.7.1.1.1.7 octet string read-only
The current status of front panel LED.
                               swDevInfoDramSize 1.3.6.1.4.1.171.11.7.1.1.1.8 integer read-only
The DRAM size of the switch hub
                           swDeviceCtl 1.3.6.1.4.1.171.11.7.1.1.2
                               swDevCtrlDisableLearningState 1.3.6.1.4.1.171.11.7.1.1.2.1 integer read-write
This Object indicate the switch hub wether or not learn any new addresses from the Ethernet ports. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                               swDevCtrlReset 1.3.6.1.4.1.171.11.7.1.1.2.2 integer read-write
This object indicates the switch hub reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The agent always returns no-reset(3) when this object is read. Enumeration: 'reset': 2, 'other': 1, 'no-reset': 3.
                               swDevCtrlSpanningTree 1.3.6.1.4.1.171.11.7.1.1.2.3 integer read-write
This Object control the device to enable/disable spanning tree algorithm in the system initilization or reset. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                       swPortPackage 1.3.6.1.4.1.171.11.7.1.2
                           swPortInfoTable 1.3.6.1.4.1.171.11.7.1.2.1 no-access
A list of port information entries.
                               swPortInfoEntry 1.3.6.1.4.1.171.11.7.1.2.1.1 no-access
This entry contains the port information, like porttype, linkstatus...
                                   swPortInfoGroupIndex 1.3.6.1.4.1.171.11.7.1.2.1.1.1 integer read-only
This object identifies the port within the group for which this entry contains infomation.
                                   swPortInfoIndex 1.3.6.1.4.1.171.11.7.1.2.1.1.2 integer read-only
This object indicate switch hub port number.
                                   swPortInfoType 1.3.6.1.4.1.171.11.7.1.2.1.1.3 integer read-only
The connector type of this port. Enumeration: 'portType-AUI': 3, 'portType-Option-module-100Bridge': 7, 'portType-Option-module-RAS': 6, 'portType-Fiber': 4, 'other': 1, 'portType-UTP': 2, 'portType-BNC': 5.
                                   swPortInfoPartitionStatus 1.3.6.1.4.1.171.11.7.1.2.1.1.4 integer read-only
This Object indicate the port partition status. Enumeration: 'partion': 3, 'other': 1, 'no-partion': 2.
                                   swPortInfoLinkStatus 1.3.6.1.4.1.171.11.7.1.2.1.1.5 integer read-only
This Object indicate the port link test status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                                   swPortInfoDuplexMode 1.3.6.1.4.1.171.11.7.1.2.1.1.6 integer read-only
This Object indicate the port work in which duplex mode. Enumeration: 'other': 1, 'full': 3, 'half': 2.
                                   swPortInfoNegotiationStatus 1.3.6.1.4.1.171.11.7.1.2.1.1.7 integer read-only
This Object indicate the port work in auto negotiation enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortInfoSpeedStatus 1.3.6.1.4.1.171.11.7.1.2.1.1.8 integer read-only
This Object indicate the port trasmit rate is in 10M bps or 100M bps . Enumeration: 'other': 1, 'speed-100M': 3, 'speed-10M': 2.
                           swPortCtrlTable 1.3.6.1.4.1.171.11.7.1.2.2 no-access
A list of port state control entries.
                               swPortCtrlEntry 1.3.6.1.4.1.171.11.7.1.2.2.1 no-access
This entry control the port state, like filter broadcast, linkstatus...
                                   swPortCtrlGroupIndex 1.3.6.1.4.1.171.11.7.1.2.2.1.1 integer read-only
This object identifies the port within the group for which this entry contains infomation.
                                   swPortCtrlIndex 1.3.6.1.4.1.171.11.7.1.2.2.1.2 integer read-only
This object indicate switch hub port number.
                                   swPortCtrlAdminState 1.3.6.1.4.1.171.11.7.1.2.2.1.3 integer read-write
Port control administration state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortCtrlDuplexState 1.3.6.1.4.1.171.11.7.1.2.2.1.4 integer read-write
Indicating the port work in half/full duplex mode. Enumeration: 'other': 1, 'full': 3, 'half': 2.
                                   swPortCtrlLinkStatusAlarmState 1.3.6.1.4.1.171.11.7.1.2.2.1.5 integer read-write
Depending on this object to determine wether send a trap or not when link status change . Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortCtrlFilterBcastState 1.3.6.1.4.1.171.11.7.1.2.2.1.6 integer read-write
Port control filter broadcast to all port or discard. Enumeration: 'forward': 2, 'discard': 3, 'other': 1.
                                   swPortCtrlForwardUnknowState 1.3.6.1.4.1.171.11.7.1.2.2.1.7 integer read-write
Port control forward unknow packet state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortCtrlPartitionStatus 1.3.6.1.4.1.171.11.7.1.2.2.1.8 integer read-write
Depending on this object determine to send a trap or not when the port was partition. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortCtrlNegotiationStatus 1.3.6.1.4.1.171.11.7.1.2.2.1.9 integer read-write
Depending on this object determine to enable NWAY or disable. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                   swPortCtrlSpeedStatus 1.3.6.1.4.1.171.11.7.1.2.2.1.10 integer read-write
Depending on this object to determining this port transmit rate is 10M bps or 100M bps. Enumeration: 'other': 1, 'speed-100M': 3, 'speed-10M': 2.
                           swPortCounterTable 1.3.6.1.4.1.171.11.7.1.2.3 no-access
A list of port MIB statistic Counter entries.
                               swPortCounterEntry 1.3.6.1.4.1.171.11.7.1.2.3.1 no-access
This entry include all the port Counter which support by DES3208, like Bytes received, Bytes Sent ...
                                   swPortCounterGroupIndex 1.3.6.1.4.1.171.11.7.1.2.3.1.1 integer read-only
This object identifies the port within the group for which this entry contains infomation.
                                   swPortCounterIndex 1.3.6.1.4.1.171.11.7.1.2.3.1.2 integer read-only
This object indicate switch hub port number.
                                   swPortBytesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.3 counter read-only
The number of good bytes received. Local and dropped packets increment the counter as well.
                                   swPortBytesSent 1.3.6.1.4.1.171.11.7.1.2.3.1.4 counter read-only
The number of good bytes sent.
                                   swPortFramesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.5 counter read-only
The number of good frames received. Local and dropped packets increment the counter as well.
                                   swPortFramesSent 1.3.6.1.4.1.171.11.7.1.2.3.1.6 counter read-only
The number of good frames sent.
                                   swPortTotalBytesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.7 counter read-only
The number of bytes received(good and bad).
                                   swPortTotalFramesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.8 counter read-only
The number of frames bytes received(good and bad).
                                   swPortBroadcastFramesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.9 counter read-only
The number of good broadcast frames received. Local and dropped packets increment the counter as well.
                                   swPortMulticastFramesReceived 1.3.6.1.4.1.171.11.7.1.2.3.1.10 counter read-only
The number of good multicast frames received. Local and dropped packets increment the counter as well.
                                   swPortCRCError 1.3.6.1.4.1.171.11.7.1.2.3.1.11 counter read-only
The number of frames with valid packet length and CRC error or misaligned(odd number of nibbles) increment the counter as well.
                                   swPortOversizeFrames 1.3.6.1.4.1.171.11.7.1.2.3.1.12 counter read-only
The number of good frames with length more than 1518 bytes ( or 1522 bytes for LongEn = 1).
                                   swPortFragments 1.3.6.1.4.1.171.11.7.1.2.3.1.13 counter read-only
The number of good bytes received. Local and dropped packets increment the counter as well.
                                   swPortJabber 1.3.6.1.4.1.171.11.7.1.2.3.1.14 counter read-only
The number of frames with length more than 1518 bytes and with CRC error or misaligned.
                                   swPortCollision 1.3.6.1.4.1.171.11.7.1.2.3.1.15 counter read-only
The number of Collisions
                                   swPortLateCollision 1.3.6.1.4.1.171.11.7.1.2.3.1.16 counter read-only
The number of Late Collision(collision occurring later than 576th transmitted bit
                                   swPortFrames64Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.17 counter read-only
The number of good packets with length of 64 bytes
                                   swPortFrames65To127Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.18 counter read-only
The number of good packets with length between 65 to 127 bytes
                                   swPortFrames128To255Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.19 counter read-only
The number of good packets with length between 128 to 255 bytes
                                   swPortFrames256To511Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.20 counter read-only
The number of good packets with length between 256 to 511 bytes
                                   swPortFrames512To1023Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.21 counter read-only
The number of good packets with length between 512 to 1023 bytes
                                   swPortFrames1024To1522Bytes 1.3.6.1.4.1.171.11.7.1.2.3.1.22 counter read-only
The number of good packets with length between 1024 to 1522 bytes
                                   swPortMACRxError 1.3.6.1.4.1.171.11.7.1.2.3.1.23 counter read-only
The number of frames with RX MAC Error
           linkChangeEvent 1.3.6.1.4.1.1710.1
The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up
           portPartition 1.3.6.1.4.1.1710.2
The trap is sent whenever the port state enter the Partion mode when more than 32 collisions occur while trasmitting.